Checkmate

Michel Lang

2026-02-02

Ever used an R function that produced a not-very-helpful error message, just to discover after minutes of debugging that you simply passed a wrong argument?

Blaming the laziness of the package author for not doing such standard checks (in a dynamically typed language such as R) is at least partially unfair, as R makes these types of checks cumbersome and annoying. Well, that’s how it was in the past.

Enter checkmate.

Virtually every standard type of user error when passing arguments into function can be caught with a simple, readable line which produces an informative error message in case. A substantial part of the package was written in C to minimize any worries about execution time overhead.

Intro

As a motivational example, consider you have a function to calculate the faculty of a natural number and the user may choose between using either the stirling approximation or R’s factorial function (which internally uses the gamma function). Thus, you have two arguments, n and method. Argument n must obviously be a positive natural number and method must be either "stirling" or "factorial". Here is a version of all the hoops you need to jump through to ensure that these simple requirements are met:

fact <- function(n, method = "stirling") {
  if (length(n) != 1)
    stop("Argument 'n' must have length 1")
  if (!is.numeric(n))
    stop("Argument 'n' must be numeric")
  if (is.na(n))
    stop("Argument 'n' may not be NA")
  if (is.double(n)) {
    if (is.nan(n))
      stop("Argument 'n' may not be NaN")
    if (is.infinite(n))
      stop("Argument 'n' must be finite")
    if (abs(n - round(n, 0)) > sqrt(.Machine$double.eps))
      stop("Argument 'n' must be an integerish value")
    n <- as.integer(n)
  }
  if (n < 0)
    stop("Argument 'n' must be >= 0")
  if (length(method) != 1)
    stop("Argument 'method' must have length 1")
  if (!is.character(method) || !method %in% c("stirling", "factorial"))
    stop("Argument 'method' must be either 'stirling' or 'factorial'")

  if (method == "factorial")
    factorial(n)
  else
    sqrt(2 * pi * n) * (n / exp(1))^n
}

And for comparison, here is the same function using checkmate:

fact <- function(n, method = "stirling") {
  assertCount(n)
  assertChoice(method, c("stirling", "factorial"))

  if (method == "factorial")
    factorial(n)
  else
    sqrt(2 * pi * n) * (n / exp(1))^n
}

Function overview

The functions can be split into four functional groups, indicated by their prefix.

If prefixed with assert, an error is thrown if the corresponding check fails. Otherwise, the checked object is returned invisibly. There are many different coding styles out there in the wild, but most R programmers stick to either camelBack or underscore_case. Therefore, checkmate offers all functions in both flavors: assert_count is just an alias for assertCount but allows you to retain your favorite style.

The family of functions prefixed with test always return the check result as logical value. Again, you can use test_count and testCount interchangeably.

Functions starting with check return the error message as a string (or TRUE otherwise) and can be used if you need more control and, e.g., want to grep on the returned error message.

expect is the last family of functions and is intended to be used with the testthat package. All performed checks are logged into the testthat reporter. Because testthat uses the underscore_case, the extension functions only come in the underscore style.

All functions are categorized into objects to check on the package help page.

In case you miss flexibility

You can use assert to perform multiple checks at once and throw an assertion if all checks fail.

Here is an example where we check that x is either of class foo or class bar:

f <- function(x) {
  assert(
    checkClass(x, "foo"),
    checkClass(x, "bar")
  )
}

Note that assert(, combine = "or") and assert(, combine = "and") allow to control the logical combination of the specified checks, and that the former is the default.

Argument Checks for the Lazy

The following functions allow a special syntax to define argument checks using a special format specification. E.g., qassert(x, "I+") asserts that x is an integer vector with at least one element and no missing values. This very simple domain specific language covers a large variety of frequent argument checks with only a few keystrokes. You choose what you like best.

checkmate as testthat extension

To extend testthat, you need to IMPORT, DEPEND or SUGGEST on the checkmate package. Here is a minimal example:

# file: tests/test-all.R
library(testthat)
library(checkmate) # for testthat extensions
test_check("mypkg")

Now you are all set and can use more than 30 new expectations in your tests.

test_that("checkmate is a sweet extension for testthat", {
  x = runif(100)
  expect_numeric(x, len = 100, any.missing = FALSE, lower = 0, upper = 1)
  # or, equivalent, using the lazy style:
  qexpect(x, "N100[0,1]")
})

Speed considerations

In comparison with tediously writing the checks yourself in R (c.f. factorial example at the beginning of the vignette), R is sometimes a tad faster while performing checks on scalars. This seems odd at first, because checkmate is mostly written in C and should be comparably fast. Yet many of the functions in the base package are not regular functions, but primitives. While primitives jump directly into the C code, checkmate has to use the considerably slower .Call interface. As a result, it is possible to write (very simple) checks using only the base functions which, under some circumstances, slightly outperform checkmate. However, if you go one step further and wrap the custom check into a function to convenient re-use it, the performance gain is often lost (see benchmark 1).

For larger objects the tide has turned because checkmate avoids many unnecessary intermediate variables. Also note that the quick/lazy implementation in qassert/qtest/qexpect is often a tad faster because only two arguments have to be evaluated (the object and the rule) to determine the set of checks to perform.

Below you find some (probably unrepresentative) benchmark. But also note that this one here has been executed from inside knitr which is often the cause for outliers in the measured execution time. Better run the benchmark yourself to get unbiased results.

Benchmark 1: Assert that x is a flag

library(checkmate)
library(ggplot2)
library(microbenchmark)

x = TRUE
r = function(x, na.ok = FALSE) { stopifnot(is.logical(x), length(x) == 1, na.ok || !is.na(x)) }
cm = function(x) assertFlag(x)
cmq = function(x) qassert(x, "B1")
mb = microbenchmark(r(x), cm(x), cmq(x))
## Warning in microbenchmark(r(x), cm(x), cmq(x)): less accurate nanosecond times
## to avoid potential integer overflows
print(mb)
## Unit: nanoseconds
##    expr  min   lq     mean median     uq    max neval cld
##    r(x) 1640 1681 11813.33   1722 1804.0 997120   100   a
##   cm(x) 1148 1189  5048.74   1189 1250.5 321358   100   a
##  cmq(x)  738  779  5596.91    779  820.0 451041   100   a
autoplot(mb)
## Warning: `aes_string()` was deprecated in ggplot2 3.0.0.
## ℹ Please use tidy evaluation idioms with `aes()`.
## ℹ See also `vignette("ggplot2-in-packages")` for more information.
## ℹ The deprecated feature was likely used in the microbenchmark package.
##   Please report the issue at
##   <https://github.com/joshuaulrich/microbenchmark/issues/>.
## This warning is displayed once per session.
## Call `lifecycle::last_lifecycle_warnings()` to see where this warning was
## generated.

Benchmark 2: Assert that x is a numeric of length 1000 with no missing nor NaN values

x = runif(1000)
r = function(x) stopifnot(is.numeric(x), length(x) == 1000, all(!is.na(x) & x >= 0 & x <= 1))
cm = function(x) assertNumeric(x, len = 1000, any.missing = FALSE, lower = 0, upper = 1)
cmq = function(x) qassert(x, "N1000[0,1]")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
##    expr   min    lq     mean median     uq      max neval cld
##    r(x) 9.471 9.840 24.03174 10.004 10.209 1401.134   100   a
##   cm(x) 2.952 2.993  8.91463  3.116  3.239  512.295   100   a
##  cmq(x) 2.952 3.034  6.42675  3.075  3.116  332.018   100   a
autoplot(mb)

Benchmark 3: Assert that x is a character vector with no missing values nor empty strings

x = sample(letters, 10000, replace = TRUE)
r = function(x) stopifnot(is.character(x), !any(is.na(x)), all(nchar(x) > 0))
cm = function(x) assertCharacter(x, any.missing = FALSE, min.chars = 1)
cmq = function(x) qassert(x, "S+[1,]")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
##    expr     min      lq      mean   median       uq      max neval cld
##    r(x) 126.772 133.578 147.25232 136.9605 138.6005 1197.159   100  a 
##   cm(x)  53.710  54.038  60.46352  54.2430  54.4275  544.931   100   b
##  cmq(x)  58.917  59.040  63.92023  60.8440  61.8895  390.238   100   b
autoplot(mb)

Benchmark 4: Test that x is a data frame with no missing values

N = 10000
x = data.frame(a = runif(N), b = sample(letters[1:5], N, replace = TRUE), c = sample(c(FALSE, TRUE), N, replace = TRUE))
r = function(x) is.data.frame(x) && !any(sapply(x, function(x) any(is.na(x))))
cm = function(x) testDataFrame(x, any.missing = FALSE)
cmq = function(x) qtest(x, "D")
mb = microbenchmark(r(x), cm(x), cmq(x))
print(mb)
## Unit: microseconds
##    expr    min     lq     mean median      uq      max neval cld
##    r(x) 51.537 57.154 71.91154 58.753 60.1060 1375.304   100  a 
##   cm(x) 22.509 22.714 27.41547 22.837 23.0215  372.485   100   b
##  cmq(x) 18.860 18.942 22.27161 18.983 19.0650  332.428   100   b
autoplot(mb)