--- sdlgfx-2.0.13.orig/debian/patches/000_binary_age.diff
+++ sdlgfx-2.0.13/debian/patches/000_binary_age.diff
@@ -0,0 +1,11 @@
+--- sdlgfx-2.0.13.orig/configure.in
++++ sdlgfx-2.0.13/configure.in
+@@ -20,7 +20,7 @@
+ MINOR_VERSION=0
+ MICRO_VERSION=13
+ INTERFACE_AGE=0
+-BINARY_AGE=0
++BINARY_AGE=9
+ VERSION=$MAJOR_VERSION.$MINOR_VERSION.$MICRO_VERSION
+ 
+ AC_SUBST(MAJOR_VERSION)
--- sdlgfx-2.0.13.orig/debian/patches/005_headers.diff
+++ sdlgfx-2.0.13/debian/patches/005_headers.diff
@@ -0,0 +1,22 @@
+--- sdlgfx-2.0.13.orig/SDL_gfxPrimitives.h
++++ sdlgfx-2.0.13/SDL_gfxPrimitives.h
+@@ -187,7 +187,7 @@
+ 
+ /* Ends C function definitions when using C++ */
+ #ifdef __cplusplus
+-};
++}
+ #endif
+ 
+ #endif				/* _SDL_gfxPrimitives_h */
+--- sdlgfx-2.0.13.orig/SDL_imageFilter.h
++++ sdlgfx-2.0.13/SDL_imageFilter.h
+@@ -186,7 +186,7 @@
+ 
+ /* Ends C function definitions when using C++ */
+ #ifdef __cplusplus
+-};
++}
+ #endif
+ 
+ #endif				/* _SDL_imageFilter_h */
--- sdlgfx-2.0.13.orig/debian/patches/series
+++ sdlgfx-2.0.13/debian/patches/series
@@ -0,0 +1,10 @@
+000_am_maintainer_mode.diff -p1
+000_binary_age.diff -p1
+000_remove_acinclude.diff -p1
+001_rebootstrap.diff -p1
+
+005_headers.diff -p1
+
+010_test_am_maintainer_mode.diff -p1
+010_test_remove_acinclude.diff -p1
+011_test_rebootstrap.diff -p1
--- sdlgfx-2.0.13.orig/debian/patches/010_test_remove_acinclude.diff
+++ sdlgfx-2.0.13/debian/patches/010_test_remove_acinclude.diff
@@ -0,0 +1,606 @@
+diff -puriN SDL_gfx-2.0.13.orig/Test/acinclude.m4 SDL_gfx-2.0.13/Test/acinclude.m4
+--- SDL_gfx-2.0.13.orig/Test/acinclude.m4	2004-12-21 14:49:59.000000000 +0100
++++ SDL_gfx-2.0.13/Test/acinclude.m4	1970-01-01 01:00:00.000000000 +0100
+@@ -1,602 +0,0 @@
+-# Configure paths for SDL
+-# Sam Lantinga 9/21/99
+-# stolen from Manish Singh
+-# stolen back from Frank Belew
+-# stolen from Manish Singh
+-# Shamelessly stolen from Owen Taylor
+-
+-dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+-dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+-dnl
+-AC_DEFUN(AM_PATH_SDL,
+-[dnl 
+-dnl Get the cflags and libraries from the sdl-config script
+-dnl
+-AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
+-            sdl_prefix="$withval", sdl_prefix="")
+-AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
+-            sdl_exec_prefix="$withval", sdl_exec_prefix="")
+-AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
+-		    , enable_sdltest=yes)
+-
+-  if test x$sdl_exec_prefix != x ; then
+-     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
+-     if test x${SDL_CONFIG+set} != xset ; then
+-        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
+-     fi
+-  fi
+-  if test x$sdl_prefix != x ; then
+-     sdl_args="$sdl_args --prefix=$sdl_prefix"
+-     if test x${SDL_CONFIG+set} != xset ; then
+-        SDL_CONFIG=$sdl_prefix/bin/sdl-config
+-     fi
+-  fi
+-
+-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
+-  min_sdl_version=ifelse([$1], ,0.11.0,$1)
+-  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+-  no_sdl=""
+-  if test "$SDL_CONFIG" = "no" ; then
+-    no_sdl=yes
+-  else
+-    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
+-    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
+-
+-    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
+-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+-    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
+-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+-    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
+-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+-    if test "x$enable_sdltest" = "xyes" ; then
+-      ac_save_CFLAGS="$CFLAGS"
+-      ac_save_LIBS="$LIBS"
+-      CFLAGS="$CFLAGS $SDL_CFLAGS"
+-      LIBS="$LIBS $SDL_LIBS"
+-dnl
+-dnl Now check if the installed SDL is sufficiently new. (Also sanity
+-dnl checks the results of sdl-config to some extent
+-dnl
+-      rm -f conf.sdltest
+-      AC_TRY_RUN([
+-#include <stdio.h>
+-#include <stdlib.h>
+-#include <string.h>
+-#include "SDL.h"
+-
+-char*
+-my_strdup (char *str)
+-{
+-  char *new_str;
+-  
+-  if (str)
+-    {
+-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+-      strcpy (new_str, str);
+-    }
+-  else
+-    new_str = NULL;
+-  
+-  return new_str;
+-}
+-
+-int main (int argc, char *argv[])
+-{
+-  int major, minor, micro;
+-  char *tmp_version;
+-
+-  /* This hangs on some systems (?)
+-  system ("touch conf.sdltest");
+-  */
+-  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
+-
+-  /* HP/UX 9 (%@#!) writes to sscanf strings */
+-  tmp_version = my_strdup("$min_sdl_version");
+-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+-     printf("%s, bad version string\n", "$min_sdl_version");
+-     exit(1);
+-   }
+-
+-   if (($sdl_major_version > major) ||
+-      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
+-      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
+-    {
+-      return 0;
+-    }
+-  else
+-    {
+-      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
+-      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
+-      printf("*** best to upgrade to the required version.\n");
+-      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
+-      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
+-      printf("*** config.cache before re-running configure\n");
+-      return 1;
+-    }
+-}
+-
+-],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+-       CFLAGS="$ac_save_CFLAGS"
+-       LIBS="$ac_save_LIBS"
+-     fi
+-  fi
+-  if test "x$no_sdl" = x ; then
+-     AC_MSG_RESULT(yes)
+-     ifelse([$2], , :, [$2])     
+-  else
+-     AC_MSG_RESULT(no)
+-     if test "$SDL_CONFIG" = "no" ; then
+-       echo "*** The sdl-config script installed by SDL could not be found"
+-       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
+-       echo "*** your path, or set the SDL_CONFIG environment variable to the"
+-       echo "*** full path to sdl-config."
+-     else
+-       if test -f conf.sdltest ; then
+-        :
+-       else
+-          echo "*** Could not run SDL test program, checking why..."
+-          CFLAGS="$CFLAGS $SDL_CFLAGS"
+-          LIBS="$LIBS $SDL_LIBS"
+-          AC_TRY_LINK([
+-#include <stdio.h>
+-#include "SDL.h"
+-],      [ return 0; ],
+-        [ echo "*** The test program compiled, but did not run. This usually means"
+-          echo "*** that the run-time linker is not finding SDL or finding the wrong"
+-          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
+-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+-          echo "*** is required on your system"
+-	  echo "***"
+-          echo "*** If you have an old version installed, it is best to remove it, although"
+-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+-          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
+-          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+-          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+-          CFLAGS="$ac_save_CFLAGS"
+-          LIBS="$ac_save_LIBS"
+-       fi
+-     fi
+-     SDL_CFLAGS=""
+-     SDL_LIBS=""
+-     ifelse([$3], , :, [$3])
+-  fi
+-  AC_SUBST(SDL_CFLAGS)
+-  AC_SUBST(SDL_LIBS)
+-  rm -f conf.sdltest
+-])
+-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+-## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
+-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+-##
+-## This program is free software; you can redistribute it and/or modify
+-## it under the terms of the GNU General Public License as published by
+-## the Free Software Foundation; either version 2 of the License, or
+-## (at your option) any later version.
+-##
+-## This program is distributed in the hope that it will be useful, but
+-## WITHOUT ANY WARRANTY; without even the implied warranty of
+-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+-## General Public License for more details.
+-##
+-## You should have received a copy of the GNU General Public License
+-## along with this program; if not, write to the Free Software
+-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-##
+-## As a special exception to the GNU General Public License, if you
+-## distribute this file as part of a program that contains a
+-## configuration script generated by Autoconf, you may include it under
+-## the same distribution terms that you use for the rest of that program.
+-
+-# serial 40 AC_PROG_LIBTOOL
+-AC_DEFUN(AC_PROG_LIBTOOL,
+-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+-
+-# Save cache, so that ltconfig can load it
+-AC_CACHE_SAVE
+-
+-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+-|| AC_MSG_ERROR([libtool configure failed])
+-
+-# Reload cache, that may have been modified by ltconfig
+-AC_CACHE_LOAD
+-
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+-
+-# Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
+-
+-# Redirect the config.log output again, so that the ltconfig log is not
+-# clobbered by the next message.
+-exec 5>>./config.log
+-])
+-
+-AC_DEFUN(AC_LIBTOOL_SETUP,
+-[AC_PREREQ(2.13)dnl
+-AC_REQUIRE([AC_ENABLE_SHARED])dnl
+-AC_REQUIRE([AC_ENABLE_STATIC])dnl
+-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-AC_REQUIRE([AC_PROG_RANLIB])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_PROG_LD])dnl
+-AC_REQUIRE([AC_PROG_NM])dnl
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-dnl
+-
+-case "$target" in
+-NONE) lt_target="$host" ;;
+-*) lt_target="$target" ;;
+-esac
+-
+-# Check for any special flags to pass to ltconfig.
+-libtool_flags="--cache-file=$cache_file"
+-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+-[libtool_flags="$libtool_flags --enable-dlopen"])
+-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+-[libtool_flags="$libtool_flags --enable-win32-dll"])
+-AC_ARG_ENABLE(libtool-lock,
+-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+-
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case "$lt_target" in
+-*-*-irix6*)
+-  # Find out which ABI we are using.
+-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+-  if AC_TRY_EVAL(ac_compile); then
+-    case "`/usr/bin/file conftest.o`" in
+-    *32-bit*)
+-      LD="${LD-ld} -32"
+-      ;;
+-    *N32*)
+-      LD="${LD-ld} -n32"
+-      ;;
+-    *64-bit*)
+-      LD="${LD-ld} -64"
+-      ;;
+-    esac
+-  fi
+-  rm -rf conftest*
+-  ;;
+-
+-*-*-sco3.2v5*)
+-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+-  SAVE_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS -belf"
+-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+-    CFLAGS="$SAVE_CFLAGS"
+-  fi
+-  ;;
+-
+-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+-[*-*-cygwin* | *-*-mingw*)
+-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+-  AC_CHECK_TOOL(AS, as, false)
+-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+-  ;;
+-])
+-esac
+-])
+-
+-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+-
+-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+-
+-# AC_ENABLE_SHARED - implement the --enable-shared flag
+-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_SHARED, [dnl
+-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(shared,
+-changequote(<<, >>)dnl
+-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_shared=yes ;;
+-no) enable_shared=no ;;
+-*)
+-  enable_shared=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_shared=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+-])
+-
+-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_SHARED(no)])
+-
+-# AC_ENABLE_STATIC - implement the --enable-static flag
+-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_STATIC, [dnl
+-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(static,
+-changequote(<<, >>)dnl
+-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_static=yes ;;
+-no) enable_static=no ;;
+-*)
+-  enable_static=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_static=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+-])
+-
+-# AC_DISABLE_STATIC - set the default static flag to --disable-static
+-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_STATIC(no)])
+-
+-
+-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(fast-install,
+-changequote(<<, >>)dnl
+-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_fast_install=yes ;;
+-no) enable_fast_install=no ;;
+-*)
+-  enable_fast_install=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_fast_install=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+-])
+-
+-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_FAST_INSTALL(no)])
+-
+-# AC_PROG_LD - find the path to the GNU or non-GNU linker
+-AC_DEFUN(AC_PROG_LD,
+-[AC_ARG_WITH(gnu-ld,
+-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-ac_prog=ld
+-if test "$ac_cv_prog_gcc" = yes; then
+-  # Check if gcc -print-prog-name=ld gives a path.
+-  AC_MSG_CHECKING([for ld used by GCC])
+-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+-  case "$ac_prog" in
+-    # Accept absolute paths.
+-changequote(,)dnl
+-    [\\/]* | [A-Za-z]:[\\/]*)
+-      re_direlt='/[^/][^/]*/\.\./'
+-changequote([,])dnl
+-      # Canonicalize the path of ld
+-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+-      done
+-      test -z "$LD" && LD="$ac_prog"
+-      ;;
+-  "")
+-    # If it fails, then pretend we aren't using GCC.
+-    ac_prog=ld
+-    ;;
+-  *)
+-    # If it is relative, then search for the first ld in PATH.
+-    with_gnu_ld=unknown
+-    ;;
+-  esac
+-elif test "$with_gnu_ld" = yes; then
+-  AC_MSG_CHECKING([for GNU ld])
+-else
+-  AC_MSG_CHECKING([for non-GNU ld])
+-fi
+-AC_CACHE_VAL(ac_cv_path_LD,
+-[if test -z "$LD"; then
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+-      ac_cv_path_LD="$ac_dir/$ac_prog"
+-      # Check to see if the program is GNU ld.  I'd rather use --version,
+-      # but apparently some GNU ld's only accept -v.
+-      # Break only if it was the GNU/non-GNU ld that we prefer.
+-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+-	test "$with_gnu_ld" != no && break
+-      else
+-	test "$with_gnu_ld" != yes && break
+-      fi
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-else
+-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+-fi])
+-LD="$ac_cv_path_LD"
+-if test -n "$LD"; then
+-  AC_MSG_RESULT($LD)
+-else
+-  AC_MSG_RESULT(no)
+-fi
+-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+-AC_PROG_LD_GNU
+-])
+-
+-AC_DEFUN(AC_PROG_LD_GNU,
+-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+-  ac_cv_prog_gnu_ld=yes
+-else
+-  ac_cv_prog_gnu_ld=no
+-fi])
+-])
+-
+-# AC_PROG_NM - find the path to a BSD-compatible name lister
+-AC_DEFUN(AC_PROG_NM,
+-[AC_MSG_CHECKING([for BSD-compatible nm])
+-AC_CACHE_VAL(ac_cv_path_NM,
+-[if test -n "$NM"; then
+-  # Let the user override the test.
+-  ac_cv_path_NM="$NM"
+-else
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+-      # Check to see if the nm accepts a BSD-compat flag.
+-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+-      #   nm: unknown option "B" ignored
+-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -B"
+-	break
+-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -p"
+-	break
+-      else
+-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+-	continue # so that we can try to find one that supports BSD flags
+-      fi
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+-fi])
+-NM="$ac_cv_path_NM"
+-AC_MSG_RESULT([$NM])
+-])
+-
+-# AC_CHECK_LIBM - check for math library
+-AC_DEFUN(AC_CHECK_LIBM,
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case "$lt_target" in
+-*-*-beos* | *-*-cygwin*)
+-  # These system don't have libm
+-  ;;
+-*-ncr-sysv4.3*)
+-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+-  ;;
+-*)
+-  AC_CHECK_LIB(m, main, LIBM="-lm")
+-  ;;
+-esac
+-])
+-
+-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl convenience library and INCLTDL to the include flags for
+-# the libltdl header and adds --enable-ltdl-convenience to the
+-# configure arguments.  Note that LIBLTDL and INCLTDL are not
+-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+-# with '${top_builddir}/' and INCLTDL will be prefixed with
+-# '${top_srcdir}/' (note the single quotes!).  If your package is not
+-# flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
+-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-  case "$enable_ltdl_convenience" in
+-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+-  "") enable_ltdl_convenience=yes
+-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+-  esac
+-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+-])
+-
+-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl installable library and INCLTDL to the include flags for
+-# the libltdl header and adds --enable-ltdl-install to the configure
+-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+-# with '${top_srcdir}/' (note the single quotes!).  If your package is
+-# not flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
+-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-  AC_CHECK_LIB(ltdl, main,
+-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+-  [if test x"$enable_ltdl_install" = xno; then
+-     AC_MSG_WARN([libltdl not installed, but installation disabled])
+-   else
+-     enable_ltdl_install=yes
+-   fi
+-  ])
+-  if test x"$enable_ltdl_install" = x"yes"; then
+-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+-  else
+-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+-    LIBLTDL="-lltdl"
+-    INCLTDL=
+-  fi
+-])
+-
+-dnl old names
+-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+-
+-dnl This is just to silence aclocal about the macro not being used
+-ifelse([AC_DISABLE_FAST_INSTALL])dnl
--- sdlgfx-2.0.13.orig/debian/patches/000_remove_acinclude.diff
+++ sdlgfx-2.0.13/debian/patches/000_remove_acinclude.diff
@@ -0,0 +1,606 @@
+diff -puriN SDL_gfx-2.0.13/acinclude.m4 SDL_gfx-2.0.13.new/acinclude.m4
+--- SDL_gfx-2.0.13/acinclude.m4	2004-12-21 14:46:15.000000000 +0100
++++ SDL_gfx-2.0.13.new/acinclude.m4	1970-01-01 01:00:00.000000000 +0100
+@@ -1,602 +0,0 @@
+-# Configure paths for SDL
+-# Sam Lantinga 9/21/99
+-# stolen from Manish Singh
+-# stolen back from Frank Belew
+-# stolen from Manish Singh
+-# Shamelessly stolen from Owen Taylor
+-
+-dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+-dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+-dnl
+-AC_DEFUN(AM_PATH_SDL,
+-[dnl 
+-dnl Get the cflags and libraries from the sdl-config script
+-dnl
+-AC_ARG_WITH(sdl-prefix,[  --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)],
+-            sdl_prefix="$withval", sdl_prefix="")
+-AC_ARG_WITH(sdl-exec-prefix,[  --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)],
+-            sdl_exec_prefix="$withval", sdl_exec_prefix="")
+-AC_ARG_ENABLE(sdltest, [  --disable-sdltest       Do not try to compile and run a test SDL program],
+-		    , enable_sdltest=yes)
+-
+-  if test x$sdl_exec_prefix != x ; then
+-     sdl_args="$sdl_args --exec-prefix=$sdl_exec_prefix"
+-     if test x${SDL_CONFIG+set} != xset ; then
+-        SDL_CONFIG=$sdl_exec_prefix/bin/sdl-config
+-     fi
+-  fi
+-  if test x$sdl_prefix != x ; then
+-     sdl_args="$sdl_args --prefix=$sdl_prefix"
+-     if test x${SDL_CONFIG+set} != xset ; then
+-        SDL_CONFIG=$sdl_prefix/bin/sdl-config
+-     fi
+-  fi
+-
+-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
+-  min_sdl_version=ifelse([$1], ,0.11.0,$1)
+-  AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+-  no_sdl=""
+-  if test "$SDL_CONFIG" = "no" ; then
+-    no_sdl=yes
+-  else
+-    SDL_CFLAGS=`$SDL_CONFIG $sdlconf_args --cflags`
+-    SDL_LIBS=`$SDL_CONFIG $sdlconf_args --libs`
+-
+-    sdl_major_version=`$SDL_CONFIG $sdl_args --version | \
+-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
+-    sdl_minor_version=`$SDL_CONFIG $sdl_args --version | \
+-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
+-    sdl_micro_version=`$SDL_CONFIG $sdl_config_args --version | \
+-           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+-    if test "x$enable_sdltest" = "xyes" ; then
+-      ac_save_CFLAGS="$CFLAGS"
+-      ac_save_LIBS="$LIBS"
+-      CFLAGS="$CFLAGS $SDL_CFLAGS"
+-      LIBS="$LIBS $SDL_LIBS"
+-dnl
+-dnl Now check if the installed SDL is sufficiently new. (Also sanity
+-dnl checks the results of sdl-config to some extent
+-dnl
+-      rm -f conf.sdltest
+-      AC_TRY_RUN([
+-#include <stdio.h>
+-#include <stdlib.h>
+-#include <string.h>
+-#include "SDL.h"
+-
+-char*
+-my_strdup (char *str)
+-{
+-  char *new_str;
+-  
+-  if (str)
+-    {
+-      new_str = (char *)malloc ((strlen (str) + 1) * sizeof(char));
+-      strcpy (new_str, str);
+-    }
+-  else
+-    new_str = NULL;
+-  
+-  return new_str;
+-}
+-
+-int main (int argc, char *argv[])
+-{
+-  int major, minor, micro;
+-  char *tmp_version;
+-
+-  /* This hangs on some systems (?)
+-  system ("touch conf.sdltest");
+-  */
+-  { FILE *fp = fopen("conf.sdltest", "a"); if ( fp ) fclose(fp); }
+-
+-  /* HP/UX 9 (%@#!) writes to sscanf strings */
+-  tmp_version = my_strdup("$min_sdl_version");
+-  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
+-     printf("%s, bad version string\n", "$min_sdl_version");
+-     exit(1);
+-   }
+-
+-   if (($sdl_major_version > major) ||
+-      (($sdl_major_version == major) && ($sdl_minor_version > minor)) ||
+-      (($sdl_major_version == major) && ($sdl_minor_version == minor) && ($sdl_micro_version >= micro)))
+-    {
+-      return 0;
+-    }
+-  else
+-    {
+-      printf("\n*** 'sdl-config --version' returned %d.%d.%d, but the minimum version\n", $sdl_major_version, $sdl_minor_version, $sdl_micro_version);
+-      printf("*** of SDL required is %d.%d.%d. If sdl-config is correct, then it is\n", major, minor, micro);
+-      printf("*** best to upgrade to the required version.\n");
+-      printf("*** If sdl-config was wrong, set the environment variable SDL_CONFIG\n");
+-      printf("*** to point to the correct copy of sdl-config, and remove the file\n");
+-      printf("*** config.cache before re-running configure\n");
+-      return 1;
+-    }
+-}
+-
+-],, no_sdl=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
+-       CFLAGS="$ac_save_CFLAGS"
+-       LIBS="$ac_save_LIBS"
+-     fi
+-  fi
+-  if test "x$no_sdl" = x ; then
+-     AC_MSG_RESULT(yes)
+-     ifelse([$2], , :, [$2])     
+-  else
+-     AC_MSG_RESULT(no)
+-     if test "$SDL_CONFIG" = "no" ; then
+-       echo "*** The sdl-config script installed by SDL could not be found"
+-       echo "*** If SDL was installed in PREFIX, make sure PREFIX/bin is in"
+-       echo "*** your path, or set the SDL_CONFIG environment variable to the"
+-       echo "*** full path to sdl-config."
+-     else
+-       if test -f conf.sdltest ; then
+-        :
+-       else
+-          echo "*** Could not run SDL test program, checking why..."
+-          CFLAGS="$CFLAGS $SDL_CFLAGS"
+-          LIBS="$LIBS $SDL_LIBS"
+-          AC_TRY_LINK([
+-#include <stdio.h>
+-#include "SDL.h"
+-],      [ return 0; ],
+-        [ echo "*** The test program compiled, but did not run. This usually means"
+-          echo "*** that the run-time linker is not finding SDL or finding the wrong"
+-          echo "*** version of SDL. If it is not finding SDL, you'll need to set your"
+-          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
+-          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
+-          echo "*** is required on your system"
+-	  echo "***"
+-          echo "*** If you have an old version installed, it is best to remove it, although"
+-          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
+-        [ echo "*** The test program failed to compile or link. See the file config.log for the"
+-          echo "*** exact error that occured. This usually means SDL was incorrectly installed"
+-          echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+-          echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+-          CFLAGS="$ac_save_CFLAGS"
+-          LIBS="$ac_save_LIBS"
+-       fi
+-     fi
+-     SDL_CFLAGS=""
+-     SDL_LIBS=""
+-     ifelse([$3], , :, [$3])
+-  fi
+-  AC_SUBST(SDL_CFLAGS)
+-  AC_SUBST(SDL_LIBS)
+-  rm -f conf.sdltest
+-])
+-## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
+-## Copyright (C) 1996-1999, 2000 Free Software Foundation, Inc.
+-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+-##
+-## This program is free software; you can redistribute it and/or modify
+-## it under the terms of the GNU General Public License as published by
+-## the Free Software Foundation; either version 2 of the License, or
+-## (at your option) any later version.
+-##
+-## This program is distributed in the hope that it will be useful, but
+-## WITHOUT ANY WARRANTY; without even the implied warranty of
+-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+-## General Public License for more details.
+-##
+-## You should have received a copy of the GNU General Public License
+-## along with this program; if not, write to the Free Software
+-## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-##
+-## As a special exception to the GNU General Public License, if you
+-## distribute this file as part of a program that contains a
+-## configuration script generated by Autoconf, you may include it under
+-## the same distribution terms that you use for the rest of that program.
+-
+-# serial 40 AC_PROG_LIBTOOL
+-AC_DEFUN(AC_PROG_LIBTOOL,
+-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+-
+-# Save cache, so that ltconfig can load it
+-AC_CACHE_SAVE
+-
+-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+-|| AC_MSG_ERROR([libtool configure failed])
+-
+-# Reload cache, that may have been modified by ltconfig
+-AC_CACHE_LOAD
+-
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+-
+-# Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
+-
+-# Redirect the config.log output again, so that the ltconfig log is not
+-# clobbered by the next message.
+-exec 5>>./config.log
+-])
+-
+-AC_DEFUN(AC_LIBTOOL_SETUP,
+-[AC_PREREQ(2.13)dnl
+-AC_REQUIRE([AC_ENABLE_SHARED])dnl
+-AC_REQUIRE([AC_ENABLE_STATIC])dnl
+-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-AC_REQUIRE([AC_PROG_RANLIB])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_PROG_LD])dnl
+-AC_REQUIRE([AC_PROG_NM])dnl
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-dnl
+-
+-case "$target" in
+-NONE) lt_target="$host" ;;
+-*) lt_target="$target" ;;
+-esac
+-
+-# Check for any special flags to pass to ltconfig.
+-libtool_flags="--cache-file=$cache_file"
+-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+-[libtool_flags="$libtool_flags --enable-dlopen"])
+-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+-[libtool_flags="$libtool_flags --enable-win32-dll"])
+-AC_ARG_ENABLE(libtool-lock,
+-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+-
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case "$lt_target" in
+-*-*-irix6*)
+-  # Find out which ABI we are using.
+-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+-  if AC_TRY_EVAL(ac_compile); then
+-    case "`/usr/bin/file conftest.o`" in
+-    *32-bit*)
+-      LD="${LD-ld} -32"
+-      ;;
+-    *N32*)
+-      LD="${LD-ld} -n32"
+-      ;;
+-    *64-bit*)
+-      LD="${LD-ld} -64"
+-      ;;
+-    esac
+-  fi
+-  rm -rf conftest*
+-  ;;
+-
+-*-*-sco3.2v5*)
+-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+-  SAVE_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS -belf"
+-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+-    CFLAGS="$SAVE_CFLAGS"
+-  fi
+-  ;;
+-
+-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+-[*-*-cygwin* | *-*-mingw*)
+-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+-  AC_CHECK_TOOL(AS, as, false)
+-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+-  ;;
+-])
+-esac
+-])
+-
+-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+-
+-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+-
+-# AC_ENABLE_SHARED - implement the --enable-shared flag
+-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_SHARED, [dnl
+-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(shared,
+-changequote(<<, >>)dnl
+-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_shared=yes ;;
+-no) enable_shared=no ;;
+-*)
+-  enable_shared=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_shared=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+-])
+-
+-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_SHARED(no)])
+-
+-# AC_ENABLE_STATIC - implement the --enable-static flag
+-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_STATIC, [dnl
+-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(static,
+-changequote(<<, >>)dnl
+-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_static=yes ;;
+-no) enable_static=no ;;
+-*)
+-  enable_static=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_static=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+-])
+-
+-# AC_DISABLE_STATIC - set the default static flag to --disable-static
+-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_STATIC(no)])
+-
+-
+-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(fast-install,
+-changequote(<<, >>)dnl
+-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_fast_install=yes ;;
+-no) enable_fast_install=no ;;
+-*)
+-  enable_fast_install=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_fast_install=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
+-])
+-
+-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_FAST_INSTALL(no)])
+-
+-# AC_PROG_LD - find the path to the GNU or non-GNU linker
+-AC_DEFUN(AC_PROG_LD,
+-[AC_ARG_WITH(gnu-ld,
+-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-ac_prog=ld
+-if test "$ac_cv_prog_gcc" = yes; then
+-  # Check if gcc -print-prog-name=ld gives a path.
+-  AC_MSG_CHECKING([for ld used by GCC])
+-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+-  case "$ac_prog" in
+-    # Accept absolute paths.
+-changequote(,)dnl
+-    [\\/]* | [A-Za-z]:[\\/]*)
+-      re_direlt='/[^/][^/]*/\.\./'
+-changequote([,])dnl
+-      # Canonicalize the path of ld
+-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+-      done
+-      test -z "$LD" && LD="$ac_prog"
+-      ;;
+-  "")
+-    # If it fails, then pretend we aren't using GCC.
+-    ac_prog=ld
+-    ;;
+-  *)
+-    # If it is relative, then search for the first ld in PATH.
+-    with_gnu_ld=unknown
+-    ;;
+-  esac
+-elif test "$with_gnu_ld" = yes; then
+-  AC_MSG_CHECKING([for GNU ld])
+-else
+-  AC_MSG_CHECKING([for non-GNU ld])
+-fi
+-AC_CACHE_VAL(ac_cv_path_LD,
+-[if test -z "$LD"; then
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+-      ac_cv_path_LD="$ac_dir/$ac_prog"
+-      # Check to see if the program is GNU ld.  I'd rather use --version,
+-      # but apparently some GNU ld's only accept -v.
+-      # Break only if it was the GNU/non-GNU ld that we prefer.
+-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+-	test "$with_gnu_ld" != no && break
+-      else
+-	test "$with_gnu_ld" != yes && break
+-      fi
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-else
+-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+-fi])
+-LD="$ac_cv_path_LD"
+-if test -n "$LD"; then
+-  AC_MSG_RESULT($LD)
+-else
+-  AC_MSG_RESULT(no)
+-fi
+-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+-AC_PROG_LD_GNU
+-])
+-
+-AC_DEFUN(AC_PROG_LD_GNU,
+-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+-  ac_cv_prog_gnu_ld=yes
+-else
+-  ac_cv_prog_gnu_ld=no
+-fi])
+-])
+-
+-# AC_PROG_NM - find the path to a BSD-compatible name lister
+-AC_DEFUN(AC_PROG_NM,
+-[AC_MSG_CHECKING([for BSD-compatible nm])
+-AC_CACHE_VAL(ac_cv_path_NM,
+-[if test -n "$NM"; then
+-  # Let the user override the test.
+-  ac_cv_path_NM="$NM"
+-else
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+-      # Check to see if the nm accepts a BSD-compat flag.
+-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+-      #   nm: unknown option "B" ignored
+-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -B"
+-	break
+-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -p"
+-	break
+-      else
+-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+-	continue # so that we can try to find one that supports BSD flags
+-      fi
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+-fi])
+-NM="$ac_cv_path_NM"
+-AC_MSG_RESULT([$NM])
+-])
+-
+-# AC_CHECK_LIBM - check for math library
+-AC_DEFUN(AC_CHECK_LIBM,
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case "$lt_target" in
+-*-*-beos* | *-*-cygwin*)
+-  # These system don't have libm
+-  ;;
+-*-ncr-sysv4.3*)
+-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+-  ;;
+-*)
+-  AC_CHECK_LIB(m, main, LIBM="-lm")
+-  ;;
+-esac
+-])
+-
+-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl convenience library and INCLTDL to the include flags for
+-# the libltdl header and adds --enable-ltdl-convenience to the
+-# configure arguments.  Note that LIBLTDL and INCLTDL are not
+-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+-# with '${top_builddir}/' and INCLTDL will be prefixed with
+-# '${top_srcdir}/' (note the single quotes!).  If your package is not
+-# flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
+-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-  case "$enable_ltdl_convenience" in
+-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+-  "") enable_ltdl_convenience=yes
+-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+-  esac
+-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+-])
+-
+-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl installable library and INCLTDL to the include flags for
+-# the libltdl header and adds --enable-ltdl-install to the configure
+-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+-# with '${top_srcdir}/' (note the single quotes!).  If your package is
+-# not flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
+-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-  AC_CHECK_LIB(ltdl, main,
+-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+-  [if test x"$enable_ltdl_install" = xno; then
+-     AC_MSG_WARN([libltdl not installed, but installation disabled])
+-   else
+-     enable_ltdl_install=yes
+-   fi
+-  ])
+-  if test x"$enable_ltdl_install" = x"yes"; then
+-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+-  else
+-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+-    LIBLTDL="-lltdl"
+-    INCLTDL=
+-  fi
+-])
+-
+-dnl old names
+-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
+-
+-dnl This is just to silence aclocal about the macro not being used
+-ifelse([AC_DISABLE_FAST_INSTALL])dnl
--- sdlgfx-2.0.13.orig/debian/patches/001_rebootstrap.diff
+++ sdlgfx-2.0.13/debian/patches/001_rebootstrap.diff
@@ -0,0 +1,41644 @@
+diff -puriN SDL_gfx-2.0.13.old/aclocal.m4 SDL_gfx-2.0.13/aclocal.m4
+--- SDL_gfx-2.0.13.old/aclocal.m4	2004-12-21 14:48:15.000000000 +0100
++++ SDL_gfx-2.0.13/aclocal.m4	2006-03-01 18:29:43.000000000 +0100
+@@ -1,14 +1,6420 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
++# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+ 
+-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+-dnl This file is free software; the Free Software Foundation
+-dnl gives unlimited permission to copy and/or distribute it,
+-dnl with or without modifications, as long as this notice is preserved.
+-
+-dnl This program is distributed in the hope that it will be useful,
+-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+-dnl PARTICULAR PURPOSE.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005  Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++
++# serial 48 Debian 1.5.22-2 AC_PROG_LIBTOOL
++
++
++# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
++# -----------------------------------------------------------
++# If this macro is not defined by Autoconf, define it here.
++m4_ifdef([AC_PROVIDE_IFELSE],
++         [],
++         [m4_define([AC_PROVIDE_IFELSE],
++	         [m4_ifdef([AC_PROVIDE_$1],
++		           [$2], [$3])])])
++
++
++# AC_PROG_LIBTOOL
++# ---------------
++AC_DEFUN([AC_PROG_LIBTOOL],
++[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
++dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
++dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
++  AC_PROVIDE_IFELSE([AC_PROG_CXX],
++    [AC_LIBTOOL_CXX],
++    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
++  ])])
++dnl And a similar setup for Fortran 77 support
++  AC_PROVIDE_IFELSE([AC_PROG_F77],
++    [AC_LIBTOOL_F77],
++    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
++])])
++
++dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
++dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
++dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
++  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++    [AC_LIBTOOL_GCJ],
++    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++      [AC_LIBTOOL_GCJ],
++      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
++	[AC_LIBTOOL_GCJ],
++      [ifdef([AC_PROG_GCJ],
++	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++       ifdef([A][M_PROG_GCJ],
++	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++       ifdef([LT_AC_PROG_GCJ],
++	     [define([LT_AC_PROG_GCJ],
++		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
++])])# AC_PROG_LIBTOOL
++
++
++# _AC_PROG_LIBTOOL
++# ----------------
++AC_DEFUN([_AC_PROG_LIBTOOL],
++[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
++
++# Prevent multiple expansion
++define([AC_PROG_LIBTOOL], [])
++])# _AC_PROG_LIBTOOL
++
++
++# AC_LIBTOOL_SETUP
++# ----------------
++AC_DEFUN([AC_LIBTOOL_SETUP],
++[AC_PREREQ(2.50)dnl
++AC_REQUIRE([AC_ENABLE_SHARED])dnl
++AC_REQUIRE([AC_ENABLE_STATIC])dnl
++AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_LD])dnl
++AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
++AC_REQUIRE([AC_PROG_NM])dnl
++
++AC_REQUIRE([AC_PROG_LN_S])dnl
++AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
++AC_REQUIRE([AC_OBJEXT])dnl
++AC_REQUIRE([AC_EXEEXT])dnl
++dnl
++
++AC_LIBTOOL_SYS_MAX_CMD_LEN
++AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
++AC_LIBTOOL_OBJDIR
++
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++_LT_AC_PROG_ECHO_BACKSLASH
++
++case $host_os in
++aix3*)
++  # AIX sometimes has problems with the GCC collect2 program.  For some
++  # reason, if we set the COLLECT_NAMES environment variable, the problems
++  # vanish in a puff of smoke.
++  if test "X${COLLECT_NAMES+set}" != Xset; then
++    COLLECT_NAMES=
++    export COLLECT_NAMES
++  fi
++  ;;
++esac
++
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
++
++# Same as above, but do not quote variable references.
++[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++
++# Constants:
++rm="rm -f"
++
++# Global variables:
++default_ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++ltmain="$ac_aux_dir/ltmain.sh"
++ofile="$default_ofile"
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++AC_CHECK_TOOL(AR, ar, false)
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++AC_CHECK_TOOL(STRIP, strip, :)
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++test -z "$AS" && AS=as
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++test -z "$LD" && LD=ld
++test -z "$LN_S" && LN_S="ln -s"
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++test -z "$NM" && NM=nm
++test -z "$SED" && SED=sed
++test -z "$OBJDUMP" && OBJDUMP=objdump
++test -z "$RANLIB" && RANLIB=:
++test -z "$STRIP" && STRIP=:
++test -z "$ac_objext" && ac_objext=o
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++  case $host_os in
++  openbsd*)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++    ;;
++  *)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++    ;;
++  esac
++  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++fi
++
++_LT_CC_BASENAME([$compiler])
++
++# Only perform the check for file, if the check method requires it
++case $deplibs_check_method in
++file_magic*)
++  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++    AC_PATH_MAGIC
++  fi
++  ;;
++esac
++
++AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++enable_win32_dll=yes, enable_win32_dll=no)
++
++AC_ARG_ENABLE([libtool-lock],
++    [AC_HELP_STRING([--disable-libtool-lock],
++	[avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++AC_ARG_WITH([pic],
++    [AC_HELP_STRING([--with-pic],
++	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++    [pic_mode="$withval"],
++    [pic_mode=default])
++test -z "$pic_mode" && pic_mode=default
++
++# Use C for the default configuration in the libtool script
++tagname=
++AC_LIBTOOL_LANG_C_CONFIG
++_LT_AC_TAGCONFIG
++])# AC_LIBTOOL_SETUP
++
++
++# _LT_AC_SYS_COMPILER
++# -------------------
++AC_DEFUN([_LT_AC_SYS_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_AC_SYS_COMPILER
++
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
++AC_DEFUN([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++  case $cc_temp in
++    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
++
++
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++AC_DEFUN([_LT_COMPILER_BOILERPLATE],
++[ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_COMPILER_BOILERPLATE
++
++
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++AC_DEFUN([_LT_LINKER_BOILERPLATE],
++[ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_LINKER_BOILERPLATE
++
++
++# _LT_AC_SYS_LIBPATH_AIX
++# ----------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
++[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi],[])
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++])# _LT_AC_SYS_LIBPATH_AIX
++
++
++# _LT_AC_SHELL_INIT(ARG)
++# ----------------------
++AC_DEFUN([_LT_AC_SHELL_INIT],
++[ifdef([AC_DIVERSION_NOTICE],
++	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
++	 [AC_DIVERT_PUSH(NOTICE)])
++$1
++AC_DIVERT_POP
++])# _LT_AC_SHELL_INIT
++
++
++# _LT_AC_PROG_ECHO_BACKSLASH
++# --------------------------
++# Add some code to the start of the generated configure script which
++# will find an echo command which doesn't interpret backslashes.
++AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
++[_LT_AC_SHELL_INIT([
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$ECHO in
++X*--fallback-echo)
++  # Remove one level of quotation (which was required for Make).
++  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
++  ;;
++esac
++
++echo=${ECHO-echo}
++if test "X[$]1" = X--no-reexec; then
++  # Discard the --no-reexec flag, and continue.
++  shift
++elif test "X[$]1" = X--fallback-echo; then
++  # Avoid inline document here, it may be left over
++  :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
++  # Yippee, $echo works!
++  :
++else
++  # Restart under the correct shell.
++  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++fi
++
++if test "X[$]1" = X--fallback-echo; then
++  # used as fallback echo
++  shift
++  cat <<EOF
++[$]*
++EOF
++  exit 0
++fi
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++if test -z "$ECHO"; then
++if test "X${echo_test_string+set}" != Xset; then
++# find a string as large as possible, as long as the shell can cope with it
++  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
++    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
++       echo_test_string=`eval $cmd` &&
++       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
++    then
++      break
++    fi
++  done
++fi
++
++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++   test "X$echo_testing_string" = "X$echo_test_string"; then
++  :
++else
++  # The Solaris, AIX, and Digital Unix default echo programs unquote
++  # backslashes.  This makes it impossible to quote backslashes using
++  #   echo "$something" | sed 's/\\/\\\\/g'
++  #
++  # So, first we look for a working echo in the user's PATH.
++
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for dir in $PATH /usr/ucb; do
++    IFS="$lt_save_ifs"
++    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++       test "X$echo_testing_string" = "X$echo_test_string"; then
++      echo="$dir/echo"
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++
++  if test "X$echo" = Xecho; then
++    # We didn't find a better echo, so look for alternatives.
++    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
++       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
++       test "X$echo_testing_string" = "X$echo_test_string"; then
++      # This shell has a builtin print -r that does the trick.
++      echo='print -r'
++    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
++	 test "X$CONFIG_SHELL" != X/bin/ksh; then
++      # If we have ksh, try running configure again with it.
++      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++      export ORIGINAL_CONFIG_SHELL
++      CONFIG_SHELL=/bin/ksh
++      export CONFIG_SHELL
++      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
++    else
++      # Try using printf.
++      echo='printf %s\n'
++      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++	 test "X$echo_testing_string" = "X$echo_test_string"; then
++	# Cool, printf works
++	:
++      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++	   test "X$echo_testing_string" = 'X\t' &&
++	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++	   test "X$echo_testing_string" = "X$echo_test_string"; then
++	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++	export CONFIG_SHELL
++	SHELL="$CONFIG_SHELL"
++	export SHELL
++	echo="$CONFIG_SHELL [$]0 --fallback-echo"
++      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++	   test "X$echo_testing_string" = 'X\t' &&
++	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++	   test "X$echo_testing_string" = "X$echo_test_string"; then
++	echo="$CONFIG_SHELL [$]0 --fallback-echo"
++      else
++	# maybe with a smaller string...
++	prev=:
++
++	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
++	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
++	  then
++	    break
++	  fi
++	  prev="$cmd"
++	done
++
++	if test "$prev" != 'sed 50q "[$]0"'; then
++	  echo_test_string=`eval $prev`
++	  export echo_test_string
++	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
++	else
++	  # Oops.  We lost completely, so just stick with echo.
++	  echo=echo
++	fi
++      fi
++    fi
++  fi
++fi
++fi
++
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++ECHO=$echo
++if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
++   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
++fi
++
++AC_SUBST(ECHO)
++])])# _LT_AC_PROG_ECHO_BACKSLASH
++
++
++# _LT_AC_LOCK
++# -----------
++AC_DEFUN([_LT_AC_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++    [AC_HELP_STRING([--disable-libtool-lock],
++	[avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.$ac_objext` in
++    *ELF-32*)
++      HPUX_IA64_MODE="32"
++      ;;
++    *ELF-64*)
++      HPUX_IA64_MODE="64"
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++*-*-irix6*)
++  # Find out which ABI we are using.
++  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++   if test "$lt_cv_prog_gnu_ld" = yes; then
++    case `/usr/bin/file conftest.$ac_objext` in
++    *32-bit*)
++      LD="${LD-ld} -melf32bsmip"
++      ;;
++    *N32*)
++      LD="${LD-ld} -melf32bmipn32"
++      ;;
++    *64-bit*)
++      LD="${LD-ld} -melf64bmip"
++      ;;
++    esac
++   else
++    case `/usr/bin/file conftest.$ac_objext` in
++    *32-bit*)
++      LD="${LD-ld} -32"
++      ;;
++    *N32*)
++      LD="${LD-ld} -n32"
++      ;;
++    *64-bit*)
++      LD="${LD-ld} -64"
++      ;;
++    esac
++   fi
++  fi
++  rm -rf conftest*
++  ;;
++
++x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++    *32-bit*)
++      case $host in
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_i386"
++          ;;
++        ppc64-*linux*|powerpc64-*linux*)
++          LD="${LD-ld} -m elf32ppclinux"
++          ;;
++        s390x-*linux*)
++          LD="${LD-ld} -m elf_s390"
++          ;;
++        sparc64-*linux*)
++          LD="${LD-ld} -m elf32_sparc"
++          ;;
++      esac
++      ;;
++    *64-bit*)
++      case $host in
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_x86_64"
++          ;;
++        ppc*-*linux*|powerpc*-*linux*)
++          LD="${LD-ld} -m elf64ppc"
++          ;;
++        s390*-*linux*)
++          LD="${LD-ld} -m elf64_s390"
++          ;;
++        sparc*-*linux*)
++          LD="${LD-ld} -m elf64_sparc"
++          ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-sco3.2v5*)
++  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++  SAVE_CFLAGS="$CFLAGS"
++  CFLAGS="$CFLAGS -belf"
++  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++    [AC_LANG_PUSH(C)
++     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++     AC_LANG_POP])
++  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++    CFLAGS="$SAVE_CFLAGS"
++  fi
++  ;;
++sparc*-*solaris*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++    *64-bit*)
++      case $lt_cv_prog_gnu_ld in
++      yes*) LD="${LD-ld} -m elf64_sparc" ;;
++      *)    LD="${LD-ld} -64" ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
++  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++  AC_CHECK_TOOL(AS, as, false)
++  AC_CHECK_TOOL(OBJDUMP, objdump, false)
++  ;;
++  ])
++esac
++
++need_locks="$enable_libtool_lock"
++
++])# _LT_AC_LOCK
++
++
++# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
++[AC_REQUIRE([LT_AC_PROG_SED])
++AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$3"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       $2=yes
++     fi
++   fi
++   $rm conftest*
++])
++
++if test x"[$]$2" = xyes; then
++    ifelse([$5], , :, [$5])
++else
++    ifelse([$6], , :, [$6])
++fi
++])# AC_LIBTOOL_COMPILER_OPTION
++
++
++# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#                          [ACTION-SUCCESS], [ACTION-FAILURE])
++# ------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
++[AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $3"
++   printf "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&AS_MESSAGE_LOG_FD
++       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         $2=yes
++       fi
++     else
++       $2=yes
++     fi
++   fi
++   $rm conftest*
++   LDFLAGS="$save_LDFLAGS"
++])
++
++if test x"[$]$2" = xyes; then
++    ifelse([$4], , :, [$4])
++else
++    ifelse([$5], , :, [$5])
++fi
++])# AC_LIBTOOL_LINKER_OPTION
++
++
++# AC_LIBTOOL_SYS_MAX_CMD_LEN
++# --------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
++[# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++  i=0
++  teststring="ABCD"
++
++  case $build_os in
++  msdosdjgpp*)
++    # On DJGPP, this test can blow up pretty badly due to problems in libc
++    # (any single argument exceeding 2000 bytes causes a buffer overrun
++    # during glob expansion).  Even if it were fixed, the result of this
++    # check would be larger than it should be.
++    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
++    ;;
++
++  gnu*)
++    # Under GNU Hurd, this test is not required because there is
++    # no limit to the length of command line arguments.
++    # Libtool will interpret -1 as no limit whatsoever
++    lt_cv_sys_max_cmd_len=-1;
++    ;;
++
++  cygwin* | mingw*)
++    # On Win9x/ME, this test blows up -- it succeeds, but takes
++    # about 5 minutes as the teststring grows exponentially.
++    # Worse, since 9x/ME are not pre-emptively multitasking,
++    # you end up with a "frozen" computer, even though with patience
++    # the test eventually succeeds (with a max line length of 256k).
++    # Instead, let's just punt: use the minimum linelength reported by
++    # all of the supported platforms: 8192 (on NT/2K/XP).
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  amigaos*)
++    # On AmigaOS with pdksh, this test takes hours, literally.
++    # So we just punt and use a minimum line length of 8192.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++    # This has been around since 386BSD, at least.  Likely further.
++    if test -x /sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++    elif test -x /usr/sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++    else
++      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
++    fi
++    # And add a safety zone
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    ;;
++
++  interix*)
++    # We know the value 262144 and hardcode it with a safety zone (like BSD)
++    lt_cv_sys_max_cmd_len=196608
++    ;;
++
++  osf*)
++    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++    # nice to cause kernel panics so lets avoid the loop below.
++    # First set a reasonable default.
++    lt_cv_sys_max_cmd_len=16384
++    #
++    if test -x /sbin/sysconfig; then
++      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++        *1*) lt_cv_sys_max_cmd_len=-1 ;;
++      esac
++    fi
++    ;;
++  sco3.2v5*)
++    lt_cv_sys_max_cmd_len=102400
++    ;;
++  sysv5* | sco5v6* | sysv4.2uw2*)
++    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++    if test -n "$kargmax"; then
++      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
++    else
++      lt_cv_sys_max_cmd_len=32768
++    fi
++    ;;
++  *)
++    # If test is not a shell built-in, we'll probably end up computing a
++    # maximum length that is only half of the actual maximum length, but
++    # we can't tell.
++    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
++	       = "XX$teststring") >/dev/null 2>&1 &&
++	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
++	    lt_cv_sys_max_cmd_len=$new_result &&
++	    test $i != 17 # 1/2 MB should be enough
++    do
++      i=`expr $i + 1`
++      teststring=$teststring$teststring
++    done
++    teststring=
++    # Add a significant safety factor because C++ compilers can tack on massive
++    # amounts of additional arguments before passing them to the linker.
++    # It appears as though 1/2 is a usable value.
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++    ;;
++  esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++  AC_MSG_RESULT(none)
++fi
++])# AC_LIBTOOL_SYS_MAX_CMD_LEN
++
++
++# _LT_AC_CHECK_DLFCN
++# ------------------
++AC_DEFUN([_LT_AC_CHECK_DLFCN],
++[AC_CHECK_HEADERS(dlfcn.h)dnl
++])# _LT_AC_CHECK_DLFCN
++
++
++# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ---------------------------------------------------------------------
++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++  [$4]
++else
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<EOF
++[#line __oline__ "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL		RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL		DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL		0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW		DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW	RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW	DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW	0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++#ifdef __cplusplus
++extern "C" void exit (int);
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++    exit (status);
++}]
++EOF
++  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) $1 ;;
++      x$lt_dlneed_uscore) $2 ;;
++      x$lt_dlunknown|x*) $3 ;;
++    esac
++  else :
++    # compilation failed
++    $3
++  fi
++fi
++rm -fr conftest*
++])# _LT_AC_TRY_DLOPEN_SELF
++
++
++# AC_LIBTOOL_DLOPEN_SELF
++# ----------------------
++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++  enable_dlopen=unknown
++  enable_dlopen_self=unknown
++  enable_dlopen_self_static=unknown
++else
++  lt_cv_dlopen=no
++  lt_cv_dlopen_libs=
++
++  case $host_os in
++  beos*)
++    lt_cv_dlopen="load_add_on"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ;;
++
++  mingw* | pw32*)
++    lt_cv_dlopen="LoadLibrary"
++    lt_cv_dlopen_libs=
++   ;;
++
++  cygwin*)
++    lt_cv_dlopen="dlopen"
++    lt_cv_dlopen_libs=
++   ;;
++
++  darwin*)
++  # if libdl is installed we need to link against it
++    AC_CHECK_LIB([dl], [dlopen],
++		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++    lt_cv_dlopen="dyld"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ])
++   ;;
++
++  *)
++    AC_CHECK_FUNC([shl_load],
++	  [lt_cv_dlopen="shl_load"],
++      [AC_CHECK_LIB([dld], [shl_load],
++	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
++	[AC_CHECK_FUNC([dlopen],
++	      [lt_cv_dlopen="dlopen"],
++	  [AC_CHECK_LIB([dl], [dlopen],
++		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++	    [AC_CHECK_LIB([svld], [dlopen],
++		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++	      [AC_CHECK_LIB([dld], [dld_link],
++		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
++	      ])
++	    ])
++	  ])
++	])
++      ])
++    ;;
++  esac
++
++  if test "x$lt_cv_dlopen" != xno; then
++    enable_dlopen=yes
++  else
++    enable_dlopen=no
++  fi
++
++  case $lt_cv_dlopen in
++  dlopen)
++    save_CPPFLAGS="$CPPFLAGS"
++    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++    save_LDFLAGS="$LDFLAGS"
++    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++    save_LIBS="$LIBS"
++    LIBS="$lt_cv_dlopen_libs $LIBS"
++
++    AC_CACHE_CHECK([whether a program can dlopen itself],
++	  lt_cv_dlopen_self, [dnl
++	  _LT_AC_TRY_DLOPEN_SELF(
++	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++    ])
++
++    if test "x$lt_cv_dlopen_self" = xyes; then
++      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++    	  lt_cv_dlopen_self_static, [dnl
++	  _LT_AC_TRY_DLOPEN_SELF(
++	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
++      ])
++    fi
++
++    CPPFLAGS="$save_CPPFLAGS"
++    LDFLAGS="$save_LDFLAGS"
++    LIBS="$save_LIBS"
++    ;;
++  esac
++
++  case $lt_cv_dlopen_self in
++  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++  *) enable_dlopen_self=unknown ;;
++  esac
++
++  case $lt_cv_dlopen_self_static in
++  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++  *) enable_dlopen_self_static=unknown ;;
++  esac
++fi
++])# AC_LIBTOOL_DLOPEN_SELF
++
++
++# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
++# ---------------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler
++AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
++[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++   $rm -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++     fi
++   fi
++   chmod u+w . 2>&AS_MESSAGE_LOG_FD
++   $rm conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++   $rm out/* && rmdir out
++   cd ..
++   rmdir conftest
++   $rm conftest*
++])
++])# AC_LIBTOOL_PROG_CC_C_O
++
++
++# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
++# -----------------------------------------
++# Check to see if we can do hard links to lock some files if needed
++AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
++[AC_REQUIRE([_LT_AC_LOCK])dnl
++
++hard_links="nottested"
++if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  AC_MSG_CHECKING([if we can lock with hard links])
++  hard_links=yes
++  $rm conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  AC_MSG_RESULT([$hard_links])
++  if test "$hard_links" = no; then
++    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
++
++
++# AC_LIBTOOL_OBJDIR
++# -----------------
++AC_DEFUN([AC_LIBTOOL_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++  lt_cv_objdir=.libs
++else
++  # MS-DOS does not allow filenames that begin with a dot.
++  lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++])# AC_LIBTOOL_OBJDIR
++
++
++# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
++# ----------------------------------------------
++# Check hardcoding attributes.
++AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_AC_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
++   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
++   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++
++  # We can hardcode non-existant directories.
++  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
++    # Linking always hardcodes the temporary library directory.
++    _LT_AC_TAGVAR(hardcode_action, $1)=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
++
++if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
++
++
++# AC_LIBTOOL_SYS_LIB_STRIP
++# ------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
++[striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
++  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++  AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++  case $host_os in
++   darwin*)
++       if test -n "$STRIP" ; then
++         striplib="$STRIP -x"
++         AC_MSG_RESULT([yes])
++       else
++  AC_MSG_RESULT([no])
++fi
++       ;;
++   *)
++  AC_MSG_RESULT([no])
++    ;;
++  esac
++fi
++])# AC_LIBTOOL_SYS_LIB_STRIP
++
++
++# AC_LIBTOOL_SYS_DYNAMIC_LINKER
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
++[AC_MSG_CHECKING([dynamic linker characteristics])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++if test "$GCC" = yes; then
++  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix4* | aix5*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[[01]] | aix4.[[01]].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++	   echo ' yes '
++	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++	:
++      else
++	can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  library_names_spec='$libname.ixlibrary $libname.a'
++  # Create ${libname}_ixlibrary.a entries in /sys/libs.
++  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[[45]]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $rm \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
++  if test "$GCC" = yes; then
++    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
++  else
++    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
++  fi
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++kfreebsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[[123]]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
++  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  freebsd*) # from 4.6 on
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++   hppa*64*)
++     shrext_cmds='.sl'
++     hardcode_into_libs=yes
++     dynamic_linker="$host_os dld.sl"
++     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++     soname_spec='${libname}${release}${shared_ext}$major'
++     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++     ;;
++   *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix3*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++	if test "$lt_cv_prog_gnu_ld" = yes; then
++		version_type=linux
++	else
++		version_type=irix
++	fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++knetbsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++nto-qnx*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++    *)                         need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[[89]] | openbsd2.[[89]].*)
++	shlibpath_overrides_runpath=no
++	;;
++      *)
++	shlibpath_overrides_runpath=yes
++	;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      export_dynamic_flag_spec='${wl}-Blargedynsym'
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++    shlibpath_overrides_runpath=no
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    shlibpath_overrides_runpath=yes
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++	;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++AC_MSG_RESULT([$dynamic_linker])
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
++
++
++# _LT_AC_TAGCONFIG
++# ----------------
++AC_DEFUN([_LT_AC_TAGCONFIG],
++[AC_ARG_WITH([tags],
++    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
++        [include additional configurations @<:@automatic@:>@])],
++    [tagnames="$withval"])
++
++if test -f "$ltmain" && test -n "$tagnames"; then
++  if test ! -f "${ofile}"; then
++    AC_MSG_WARN([output file `$ofile' does not exist])
++  fi
++
++  if test -z "$LTCC"; then
++    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
++    if test -z "$LTCC"; then
++      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
++    else
++      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
++    fi
++  fi
++  if test -z "$LTCFLAGS"; then
++    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
++  fi
++
++  # Extract list of available tagged configurations in $ofile.
++  # Note that this assumes the entire list is on one line.
++  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
++
++  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++  for tagname in $tagnames; do
++    IFS="$lt_save_ifs"
++    # Check whether tagname contains only valid characters
++    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
++    "") ;;
++    *)  AC_MSG_ERROR([invalid tag name: $tagname])
++	;;
++    esac
++
++    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
++    then
++      AC_MSG_ERROR([tag name \"$tagname\" already exists])
++    fi
++
++    # Update the list of available tags.
++    if test -n "$tagname"; then
++      echo appending configuration tag \"$tagname\" to $ofile
++
++      case $tagname in
++      CXX)
++	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++	    (test "X$CXX" != "Xg++"))) ; then
++	  AC_LIBTOOL_LANG_CXX_CONFIG
++	else
++	  tagname=""
++	fi
++	;;
++
++      F77)
++	if test -n "$F77" && test "X$F77" != "Xno"; then
++	  AC_LIBTOOL_LANG_F77_CONFIG
++	else
++	  tagname=""
++	fi
++	;;
++
++      GCJ)
++	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
++	  AC_LIBTOOL_LANG_GCJ_CONFIG
++	else
++	  tagname=""
++	fi
++	;;
++
++      RC)
++	AC_LIBTOOL_LANG_RC_CONFIG
++	;;
++
++      *)
++	AC_MSG_ERROR([Unsupported tag name: $tagname])
++	;;
++      esac
++
++      # Append the new tag name to the list of available tags.
++      if test -n "$tagname" ; then
++      available_tags="$available_tags $tagname"
++    fi
++    fi
++  done
++  IFS="$lt_save_ifs"
++
++  # Now substitute the updated list of available tags.
++  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
++    mv "${ofile}T" "$ofile"
++    chmod +x "$ofile"
++  else
++    rm -f "${ofile}T"
++    AC_MSG_ERROR([unable to update list of available tagged configurations.])
++  fi
++fi
++])# _LT_AC_TAGCONFIG
++
++
++# AC_LIBTOOL_DLOPEN
++# -----------------
++# enable checks for dlopen support
++AC_DEFUN([AC_LIBTOOL_DLOPEN],
++ [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
++])# AC_LIBTOOL_DLOPEN
++
++
++# AC_LIBTOOL_WIN32_DLL
++# --------------------
++# declare package support for building win32 DLLs
++AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
++[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
++])# AC_LIBTOOL_WIN32_DLL
++
++
++# AC_ENABLE_SHARED([DEFAULT])
++# ---------------------------
++# implement the --enable-shared flag
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++AC_DEFUN([AC_ENABLE_SHARED],
++[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
++AC_ARG_ENABLE([shared],
++    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
++	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_shared=yes ;;
++    no) enable_shared=no ;;
++    *)
++      enable_shared=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_shared=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
++])# AC_ENABLE_SHARED
++
++
++# AC_DISABLE_SHARED
++# -----------------
++# set the default shared flag to --disable-shared
++AC_DEFUN([AC_DISABLE_SHARED],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++AC_ENABLE_SHARED(no)
++])# AC_DISABLE_SHARED
++
++
++# AC_ENABLE_STATIC([DEFAULT])
++# ---------------------------
++# implement the --enable-static flag
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++AC_DEFUN([AC_ENABLE_STATIC],
++[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
++AC_ARG_ENABLE([static],
++    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
++	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_static=yes ;;
++    no) enable_static=no ;;
++    *)
++     enable_static=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_static=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
++])# AC_ENABLE_STATIC
++
++
++# AC_DISABLE_STATIC
++# -----------------
++# set the default static flag to --disable-static
++AC_DEFUN([AC_DISABLE_STATIC],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++AC_ENABLE_STATIC(no)
++])# AC_DISABLE_STATIC
++
++
++# AC_ENABLE_FAST_INSTALL([DEFAULT])
++# ---------------------------------
++# implement the --enable-fast-install flag
++# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
++AC_DEFUN([AC_ENABLE_FAST_INSTALL],
++[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
++AC_ARG_ENABLE([fast-install],
++    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
++    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
++    [p=${PACKAGE-default}
++    case $enableval in
++    yes) enable_fast_install=yes ;;
++    no) enable_fast_install=no ;;
++    *)
++      enable_fast_install=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_fast_install=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac],
++    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
++])# AC_ENABLE_FAST_INSTALL
++
++
++# AC_DISABLE_FAST_INSTALL
++# -----------------------
++# set the default to --disable-fast-install
++AC_DEFUN([AC_DISABLE_FAST_INSTALL],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++AC_ENABLE_FAST_INSTALL(no)
++])# AC_DISABLE_FAST_INSTALL
++
++
++# AC_LIBTOOL_PICMODE([MODE])
++# --------------------------
++# implement the --with-pic flag
++# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
++AC_DEFUN([AC_LIBTOOL_PICMODE],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++pic_mode=ifelse($#,1,$1,default)
++])# AC_LIBTOOL_PICMODE
++
++
++# AC_PROG_EGREP
++# -------------
++# This is predefined starting with Autoconf 2.54, so this conditional
++# definition can be removed once we require Autoconf 2.54 or later.
++m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
++[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
++   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
++    then ac_cv_prog_egrep='grep -E'
++    else ac_cv_prog_egrep='egrep'
++    fi])
++ EGREP=$ac_cv_prog_egrep
++ AC_SUBST([EGREP])
++])])
++
++
++# AC_PATH_TOOL_PREFIX
++# -------------------
++# find a file program which can recognise shared library
++AC_DEFUN([AC_PATH_TOOL_PREFIX],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_MSG_CHECKING([for $1])
++AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
++[case $MAGIC_CMD in
++[[\\/*] |  ?:[\\/]*])
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++dnl $ac_dummy forces splitting on constant user-supplied paths.
++dnl POSIX.2 word splitting is done only on the output of word expansions,
++dnl not every word.  This closes a longstanding sh security hole.
++  ac_dummy="ifelse([$2], , $PATH, [$2])"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/$1; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
++      if test -n "$file_magic_test_file"; then
++	case $deplibs_check_method in
++	"file_magic "*)
++	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++	    $EGREP "$file_magic_regex" > /dev/null; then
++	    :
++	  else
++	    cat <<EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
++
++EOF
++	  fi ;;
++	esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac])
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  AC_MSG_RESULT($MAGIC_CMD)
++else
++  AC_MSG_RESULT(no)
++fi
++])# AC_PATH_TOOL_PREFIX
++
++
++# AC_PATH_MAGIC
++# -------------
++# find a file program which can recognise a shared library
++AC_DEFUN([AC_PATH_MAGIC],
++[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++  if test -n "$ac_tool_prefix"; then
++    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
++  else
++    MAGIC_CMD=:
++  fi
++fi
++])# AC_PATH_MAGIC
++
++
++# AC_PROG_LD
++# ----------
++# find the pathname to the GNU or non-GNU linker
++AC_DEFUN([AC_PROG_LD],
++[AC_ARG_WITH([gnu-ld],
++    [AC_HELP_STRING([--with-gnu-ld],
++	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
++    [test "$withval" = no || with_gnu_ld=yes],
++    [with_gnu_ld=no])
++AC_REQUIRE([LT_AC_PROG_SED])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++ac_prog=ld
++if test "$GCC" = yes; then
++  # Check if gcc -print-prog-name=ld gives a path.
++  AC_MSG_CHECKING([for ld used by $CC])
++  case $host in
++  *-*-mingw*)
++    # gcc leaves a trailing carriage return which upsets mingw
++    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++  *)
++    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++  esac
++  case $ac_prog in
++    # Accept absolute paths.
++    [[\\/]]* | ?:[[\\/]]*)
++      re_direlt='/[[^/]][[^/]]*/\.\./'
++      # Canonicalize the pathname of ld
++      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
++      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
++	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
++      done
++      test -z "$LD" && LD="$ac_prog"
++      ;;
++  "")
++    # If it fails, then pretend we aren't using GCC.
++    ac_prog=ld
++    ;;
++  *)
++    # If it is relative, then search for the first ld in PATH.
++    with_gnu_ld=unknown
++    ;;
++  esac
++elif test "$with_gnu_ld" = yes; then
++  AC_MSG_CHECKING([for GNU ld])
++else
++  AC_MSG_CHECKING([for non-GNU ld])
++fi
++AC_CACHE_VAL(lt_cv_path_LD,
++[if test -z "$LD"; then
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for ac_dir in $PATH; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++      lt_cv_path_LD="$ac_dir/$ac_prog"
++      # Check to see if the program is GNU ld.  I'd rather use --version,
++      # but apparently some variants of GNU ld only accept -v.
++      # Break only if it was the GNU/non-GNU ld that we prefer.
++      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++      *GNU* | *'with BFD'*)
++	test "$with_gnu_ld" != no && break
++	;;
++      *)
++	test "$with_gnu_ld" != yes && break
++	;;
++      esac
++    fi
++  done
++  IFS="$lt_save_ifs"
++else
++  lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi])
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++  AC_MSG_RESULT($LD)
++else
++  AC_MSG_RESULT(no)
++fi
++test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
++AC_PROG_LD_GNU
++])# AC_PROG_LD
++
++
++# AC_PROG_LD_GNU
++# --------------
++AC_DEFUN([AC_PROG_LD_GNU],
++[AC_REQUIRE([AC_PROG_EGREP])dnl
++AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
++[# I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++  lt_cv_prog_gnu_ld=yes
++  ;;
++*)
++  lt_cv_prog_gnu_ld=no
++  ;;
++esac])
++with_gnu_ld=$lt_cv_prog_gnu_ld
++])# AC_PROG_LD_GNU
++
++
++# AC_PROG_LD_RELOAD_FLAG
++# ----------------------
++# find reload flag for linker
++#   -- PORTME Some linkers may need a different reload flag.
++AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
++[AC_CACHE_CHECK([for $LD option to reload object files],
++  lt_cv_ld_reload_flag,
++  [lt_cv_ld_reload_flag='-r'])
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++  darwin*)
++    if test "$GCC" = yes; then
++      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++    else
++      reload_cmds='$LD$reload_flag -o $output$reload_objs'
++    fi
++    ;;
++esac
++])# AC_PROG_LD_RELOAD_FLAG
++
++
++# AC_DEPLIBS_CHECK_METHOD
++# -----------------------
++# how to check for library dependencies
++#  -- PORTME fill in with the dynamic library characteristics
++AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
++[AC_CACHE_CHECK([how to recognise dependent libraries],
++lt_cv_deplibs_check_method,
++[lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix4* | aix5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++beos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++bsdi[[45]]*)
++  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
++  lt_cv_file_magic_cmd='/usr/bin/file -L'
++  lt_cv_file_magic_test_file=/shlib/libc.so
++  ;;
++
++cygwin*)
++  # func_win32_libid is a shell function defined in ltmain.sh
++  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++  lt_cv_file_magic_cmd='func_win32_libid'
++  ;;
++
++mingw* | pw32*)
++  # Base MSYS/MinGW do not provide the 'file' command needed by
++  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
++  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++  lt_cv_file_magic_cmd='$OBJDUMP -f'
++  ;;
++
++darwin* | rhapsody*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++freebsd* | kfreebsd*-gnu | dragonfly*)
++  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
++    case $host_cpu in
++    i*86 )
++      # Not sure whether the presence of OpenBSD here was a mistake.
++      # Let's accept both of them until this is cleared up.
++      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
++      lt_cv_file_magic_cmd=/usr/bin/file
++      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++      ;;
++    esac
++  else
++    lt_cv_deplibs_check_method=pass_all
++  fi
++  ;;
++
++gnu*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++hpux10.20* | hpux11*)
++  lt_cv_file_magic_cmd=/usr/bin/file
++  case $host_cpu in
++  ia64*)
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
++    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++    ;;
++  hppa*64*)
++    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
++    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++    ;;
++  *)
++    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
++    lt_cv_file_magic_test_file=/usr/lib/libc.sl
++    ;;
++  esac
++  ;;
++
++interix3*)
++  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $LD in
++  *-32|*"-32 ") libmagic=32-bit;;
++  *-n32|*"-n32 ") libmagic=N32;;
++  *-64|*"-64 ") libmagic=64-bit;;
++  *) libmagic=never-match;;
++  esac
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
++  fi
++  ;;
++
++newos6*)
++  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
++  lt_cv_file_magic_cmd=/usr/bin/file
++  lt_cv_file_magic_test_file=/usr/lib/libnls.so
++  ;;
++
++nto-qnx*)
++  lt_cv_deplibs_check_method=unknown
++  ;;
++
++openbsd*)
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
++  fi
++  ;;
++
++osf3* | osf4* | osf5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++solaris*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++sysv4 | sysv4.3*)
++  case $host_vendor in
++  motorola)
++    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
++    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++    ;;
++  ncr)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  sequent)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
++    ;;
++  sni)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
++    lt_cv_file_magic_test_file=/lib/libc.so
++    ;;
++  siemens)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  pc)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  esac
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++esac
++])
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++])# AC_DEPLIBS_CHECK_METHOD
++
++
++# AC_PROG_NM
++# ----------
++# find the pathname to a BSD-compatible name lister
++AC_DEFUN([AC_PROG_NM],
++[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
++[if test -n "$NM"; then
++  # Let the user override the test.
++  lt_cv_path_NM="$NM"
++else
++  lt_nm_to_check="${ac_tool_prefix}nm"
++  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then 
++    lt_nm_to_check="$lt_nm_to_check nm"
++  fi
++  for lt_tmp_nm in $lt_nm_to_check; do
++    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++      IFS="$lt_save_ifs"
++      test -z "$ac_dir" && ac_dir=.
++      tmp_nm="$ac_dir/$lt_tmp_nm"
++      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++	# Check to see if the nm accepts a BSD-compat flag.
++	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
++	#   nm: unknown option "B" ignored
++	# Tru64's nm complains that /dev/null is an invalid object file
++	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++	*/dev/null* | *'Invalid file or object type'*)
++	  lt_cv_path_NM="$tmp_nm -B"
++	  break
++	  ;;
++	*)
++	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++	  */dev/null*)
++	    lt_cv_path_NM="$tmp_nm -p"
++	    break
++	    ;;
++	  *)
++	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++	    continue # so that we can try to find one that supports BSD flags
++	    ;;
++	  esac
++	  ;;
++	esac
++      fi
++    done
++    IFS="$lt_save_ifs"
++  done
++  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
++fi])
++NM="$lt_cv_path_NM"
++])# AC_PROG_NM
++
++
++# AC_CHECK_LIBM
++# -------------
++# check for math library
++AC_DEFUN([AC_CHECK_LIBM],
++[AC_REQUIRE([AC_CANONICAL_HOST])dnl
++LIBM=
++case $host in
++*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
++  # These system don't have libm, or don't need it
++  ;;
++*-ncr-sysv4.3*)
++  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
++  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
++  ;;
++*)
++  AC_CHECK_LIB(m, cos, LIBM="-lm")
++  ;;
++esac
++])# AC_CHECK_LIBM
++
++
++# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
++# -----------------------------------
++# sets LIBLTDL to the link flags for the libltdl convenience library and
++# LTDLINCL to the include flags for the libltdl header and adds
++# --enable-ltdl-convenience to the configure arguments.  Note that
++# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
++# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
++# (note the single quotes!).  If your package is not flat and you're not
++# using automake, define top_builddir and top_srcdir appropriately in
++# the Makefiles.
++AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++  case $enable_ltdl_convenience in
++  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
++  "") enable_ltdl_convenience=yes
++      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
++  esac
++  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
++  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++  # For backwards non-gettext consistent compatibility...
++  INCLTDL="$LTDLINCL"
++])# AC_LIBLTDL_CONVENIENCE
++
++
++# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
++# -----------------------------------
++# sets LIBLTDL to the link flags for the libltdl installable library and
++# LTDLINCL to the include flags for the libltdl header and adds
++# --enable-ltdl-install to the configure arguments.  Note that
++# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
++# and an installed libltdl is not found, it is assumed to be `libltdl'.
++# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
++# '${top_srcdir}/' (note the single quotes!).  If your package is not
++# flat and you're not using automake, define top_builddir and top_srcdir
++# appropriately in the Makefiles.
++# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
++AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
++[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
++  AC_CHECK_LIB(ltdl, lt_dlinit,
++  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
++  [if test x"$enable_ltdl_install" = xno; then
++     AC_MSG_WARN([libltdl not installed, but installation disabled])
++   else
++     enable_ltdl_install=yes
++   fi
++  ])
++  if test x"$enable_ltdl_install" = x"yes"; then
++    ac_configure_args="$ac_configure_args --enable-ltdl-install"
++    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
++    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++  else
++    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
++    LIBLTDL="-lltdl"
++    LTDLINCL=
++  fi
++  # For backwards non-gettext consistent compatibility...
++  INCLTDL="$LTDLINCL"
++])# AC_LIBLTDL_INSTALLABLE
++
++
++# AC_LIBTOOL_CXX
++# --------------
++# enable support for C++ libraries
++AC_DEFUN([AC_LIBTOOL_CXX],
++[AC_REQUIRE([_LT_AC_LANG_CXX])
++])# AC_LIBTOOL_CXX
++
++
++# _LT_AC_LANG_CXX
++# ---------------
++AC_DEFUN([_LT_AC_LANG_CXX],
++[AC_REQUIRE([AC_PROG_CXX])
++AC_REQUIRE([_LT_AC_PROG_CXXCPP])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
++])# _LT_AC_LANG_CXX
++
++# _LT_AC_PROG_CXXCPP
++# ------------------
++AC_DEFUN([_LT_AC_PROG_CXXCPP],
++[
++AC_REQUIRE([AC_PROG_CXX])
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++    (test "X$CXX" != "Xg++"))) ; then
++  AC_PROG_CXXCPP
++fi
++])# _LT_AC_PROG_CXXCPP
++
++# AC_LIBTOOL_F77
++# --------------
++# enable support for Fortran 77 libraries
++AC_DEFUN([AC_LIBTOOL_F77],
++[AC_REQUIRE([_LT_AC_LANG_F77])
++])# AC_LIBTOOL_F77
++
++
++# _LT_AC_LANG_F77
++# ---------------
++AC_DEFUN([_LT_AC_LANG_F77],
++[AC_REQUIRE([AC_PROG_F77])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
++])# _LT_AC_LANG_F77
++
++
++# AC_LIBTOOL_GCJ
++# --------------
++# enable support for GCJ libraries
++AC_DEFUN([AC_LIBTOOL_GCJ],
++[AC_REQUIRE([_LT_AC_LANG_GCJ])
++])# AC_LIBTOOL_GCJ
++
++
++# _LT_AC_LANG_GCJ
++# ---------------
++AC_DEFUN([_LT_AC_LANG_GCJ],
++[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
++  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
++    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
++      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
++	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
++	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
++])# _LT_AC_LANG_GCJ
++
++
++# AC_LIBTOOL_RC
++# -------------
++# enable support for Windows resource files
++AC_DEFUN([AC_LIBTOOL_RC],
++[AC_REQUIRE([LT_AC_PROG_RC])
++_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
++])# AC_LIBTOOL_RC
++
++
++# AC_LIBTOOL_LANG_C_CONFIG
++# ------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined.  Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
++AC_DEFUN([_LT_AC_LANG_C_CONFIG],
++[lt_save_CC="$CC"
++AC_LANG_PUSH(C)
++
++# Source file extension for C test sources.
++ac_ext=c
++
++# Object file extension for compiled C test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}\n'
++
++_LT_AC_SYS_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++AC_LIBTOOL_SYS_LIB_STRIP
++AC_LIBTOOL_DLOPEN_SELF
++
++# Report which library types will actually be built
++AC_MSG_CHECKING([if libtool supports shared libraries])
++AC_MSG_RESULT([$can_build_shared])
++
++AC_MSG_CHECKING([whether to build shared libraries])
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case $host_os in
++aix3*)
++  test "$enable_shared" = yes && enable_static=no
++  if test -n "$RANLIB"; then
++    archive_cmds="$archive_cmds~\$RANLIB \$lib"
++    postinstall_cmds='$RANLIB $lib'
++  fi
++  ;;
++
++aix4* | aix5*)
++  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++    test "$enable_shared" = yes && enable_static=no
++  fi
++    ;;
++esac
++AC_MSG_RESULT([$enable_shared])
++
++AC_MSG_CHECKING([whether to build static libraries])
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++AC_MSG_RESULT([$enable_static])
++
++AC_LIBTOOL_CONFIG($1)
++
++AC_LANG_POP
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_C_CONFIG
++
++
++# AC_LIBTOOL_LANG_CXX_CONFIG
++# --------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined.  Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
++AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
++[AC_LANG_PUSH(C++)
++AC_REQUIRE([AC_PROG_CXX])
++AC_REQUIRE([_LT_AC_PROG_CXXCPP])
++
++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_AC_TAGVAR(allow_undefined_flag, $1)=
++_LT_AC_TAGVAR(always_export_symbols, $1)=no
++_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
++_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_direct, $1)=no
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++_LT_AC_TAGVAR(hardcode_automatic, $1)=no
++_LT_AC_TAGVAR(module_cmds, $1)=
++_LT_AC_TAGVAR(module_expsym_cmds, $1)=
++_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_AC_TAGVAR(no_undefined_flag, $1)=
++_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Dependencies to place before and after the object being linked:
++_LT_AC_TAGVAR(predep_objects, $1)=
++_LT_AC_TAGVAR(postdep_objects, $1)=
++_LT_AC_TAGVAR(predeps, $1)=
++_LT_AC_TAGVAR(postdeps, $1)=
++_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
++
++# Source file extension for C++ test sources.
++ac_ext=cpp
++
++# Object file extension for compiled C++ test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_LD=$LD
++lt_save_GCC=$GCC
++GCC=$GXX
++lt_save_with_gnu_ld=$with_gnu_ld
++lt_save_path_LD=$lt_cv_path_LD
++if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
++else
++  $as_unset lt_cv_prog_gnu_ld
++fi
++if test -n "${lt_cv_path_LDCXX+set}"; then
++  lt_cv_path_LD=$lt_cv_path_LDCXX
++else
++  $as_unset lt_cv_path_LD
++fi
++test -z "${LDCXX+set}" || LD=$LDCXX
++CC=${CXX-"c++"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++
++# We don't want -fno-exception wen compiling C++ code, so set the
++# no_builtin_flag separately
++if test "$GXX" = yes; then
++  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++else
++  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++fi
++
++if test "$GXX" = yes; then
++  # Set up default GNU C++ configuration
++
++  AC_PROG_LD
++
++  # Check if GNU C++ uses GNU ld as the underlying linker, since the
++  # archiving commands below assume that GNU ld is being used.
++  if test "$with_gnu_ld" = yes; then
++    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++    #     investigate it a little bit more. (MM)
++    wlarc='${wl}'
++
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
++	grep 'no-whole-archive' > /dev/null; then
++      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++    else
++      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++  else
++    with_gnu_ld=no
++    wlarc=
++
++    # A generic and very simple default shared library creation
++    # command for GNU C++ for the case where it uses the native
++    # linker, instead of GNU ld.  If possible, this setting should
++    # overridden to take advantage of the native linker features on
++    # the platform it is being used on.
++    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++  fi
++
++  # Commands to make compiler produce verbose output that lists
++  # what "hidden" libraries, object files and flags are used when
++  # linking a shared library.
++  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++
++else
++  GXX=no
++  with_gnu_ld=no
++  wlarc=
++fi
++
++# PORTME: fill in a description of your system's C++ link characteristics
++AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++_LT_AC_TAGVAR(ld_shlibs, $1)=yes
++case $host_os in
++  aix3*)
++    # FIXME: insert proper C++ library support
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  aix4* | aix5*)
++    if test "$host_cpu" = ia64; then
++      # On IA64, the linker does run time linking by default, so we don't
++      # have to do anything special.
++      aix_use_runtimelinking=no
++      exp_sym_flag='-Bexport'
++      no_entry_flag=""
++    else
++      aix_use_runtimelinking=no
++
++      # Test if we are trying to use run time linking or normal
++      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++      # need to do runtime linking.
++      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++	for ld_flag in $LDFLAGS; do
++	  case $ld_flag in
++	  *-brtl*)
++	    aix_use_runtimelinking=yes
++	    break
++	    ;;
++	  esac
++	done
++	;;
++      esac
++
++      exp_sym_flag='-bexport'
++      no_entry_flag='-bnoentry'
++    fi
++
++    # When large executables or shared objects are built, AIX ld can
++    # have problems creating the table of contents.  If linking a library
++    # or program results in "error TOC overflow" add -mminimal-toc to
++    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++    _LT_AC_TAGVAR(archive_cmds, $1)=''
++    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++
++    if test "$GXX" = yes; then
++      case $host_os in aix4.[[012]]|aix4.[[012]].*)
++      # We only want to do this on AIX 4.2 and lower, the check
++      # below for broken collect2 doesn't work under 4.3+
++	collect2name=`${CC} -print-prog-name=collect2`
++	if test -f "$collect2name" && \
++	   strings "$collect2name" | grep resolve_lib_name >/dev/null
++	then
++	  # We have reworked collect2
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++	else
++	  # We have old collect2
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
++	  # It fails to find uninstalled libraries when the uninstalled
++	  # path is not listed in the libpath.  Setting hardcode_minus_L
++	  # to unsupported forces relinking
++	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++	fi
++	;;
++      esac
++      shared_flag='-shared'
++      if test "$aix_use_runtimelinking" = yes; then
++	shared_flag="$shared_flag "'${wl}-G'
++      fi
++    else
++      # not using gcc
++      if test "$host_cpu" = ia64; then
++	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++	# chokes on -Wl,-G. The following line is correct:
++	shared_flag='-G'
++      else
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag='${wl}-G'
++	else
++	  shared_flag='${wl}-bM:SRE'
++	fi
++      fi
++    fi
++
++    # It seems that -bexpall does not export symbols beginning with
++    # underscore (_), so it is better to generate a list of symbols to export.
++    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
++    if test "$aix_use_runtimelinking" = yes; then
++      # Warning - without using the other runtime loading flags (-brtl),
++      # -berok will link without error, but may produce a broken library.
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
++      # Determine the default libpath from the value encoded in an empty executable.
++      _LT_AC_SYS_LIBPATH_AIX
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++
++      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++     else
++      if test "$host_cpu" = ia64; then
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++      else
++	# Determine the default libpath from the value encoded in an empty executable.
++	_LT_AC_SYS_LIBPATH_AIX
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++	# Warning - without using the other run time loading flags,
++	# -berok will link without error, but may produce a broken library.
++	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++	# Exported symbols can be pulled into shared objects from archives
++	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++	# This is similar to how AIX traditionally builds its shared libraries.
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++      fi
++    fi
++    ;;
++
++  beos*)
++    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++      # support --undefined.  This deserves some investigation.  FIXME
++      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++    else
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    fi
++    ;;
++
++  chorus*)
++    case $cc_basename in
++      *)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++    esac
++    ;;
++
++  cygwin* | mingw* | pw32*)
++    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++    # as there is no search path for DLLs.
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++    _LT_AC_TAGVAR(always_export_symbols, $1)=no
++    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++
++    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      # If the export-symbols file already is a .def file (1st line
++      # is EXPORTS), use it as is; otherwise, prepend...
++      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	cp $export_symbols $output_objdir/$soname.def;
++      else
++	echo EXPORTS > $output_objdir/$soname.def;
++	cat $export_symbols >> $output_objdir/$soname.def;
++      fi~
++      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++    else
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    fi
++  ;;
++      darwin* | rhapsody*)
++        case $host_os in
++        rhapsody* | darwin1.[[012]])
++         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
++         ;;
++       *) # Darwin 1.3 on
++         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++         else
++           case ${MACOSX_DEPLOYMENT_TARGET} in
++             10.[[012]])
++               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++               ;;
++             10.*)
++               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
++               ;;
++           esac
++         fi
++         ;;
++        esac
++      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_AC_TAGVAR(hardcode_direct, $1)=no
++      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++
++    if test "$GXX" = yes ; then
++      lt_int_apple_cc_single_mod=no
++      output_verbose_link_cmd='echo'
++      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
++       lt_int_apple_cc_single_mod=yes
++      fi
++      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
++       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++      else
++          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++        fi
++        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
++            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          else
++            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          fi
++            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++      else
++      case $cc_basename in
++        xlc*)
++         output_verbose_link_cmd='echo'
++          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
++          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          ;;
++       *)
++         _LT_AC_TAGVAR(ld_shlibs, $1)=no
++          ;;
++      esac
++      fi
++        ;;
++
++  dgux*)
++    case $cc_basename in
++      ec++*)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      ghcx*)
++	# Green Hills C++ Compiler
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++    esac
++    ;;
++  freebsd[[12]]*)
++    # C++ shared libraries reported to be fairly broken before switch to ELF
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  freebsd-elf*)
++    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++    ;;
++  freebsd* | kfreebsd*-gnu | dragonfly*)
++    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++    # conventions
++    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
++    ;;
++  gnu*)
++    ;;
++  hpux9*)
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++				# but as the default
++				# location of the library.
++
++    case $cc_basename in
++    CC*)
++      # FIXME: insert proper C++ library support
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++      ;;
++    aCC*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      # Commands to make compiler produce verbose output that lists
++      # what "hidden" libraries, object files and flags are used when
++      # linking a shared library.
++      #
++      # There doesn't appear to be a way to prevent this compiler from
++      # explicitly linking system object files so we need to strip them
++      # from the output so that they don't get included in the library
++      # dependencies.
++      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++      ;;
++    *)
++      if test "$GXX" = yes; then
++        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++        # FIXME: insert proper C++ library support
++        _LT_AC_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++    esac
++    ;;
++  hpux10*|hpux11*)
++    if test $with_gnu_ld = no; then
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++      case $host_cpu in
++      hppa*64*|ia64*)
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
++        ;;
++      *)
++	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++        ;;
++      esac
++    fi
++    case $host_cpu in
++    hppa*64*|ia64*)
++      _LT_AC_TAGVAR(hardcode_direct, $1)=no
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++    *)
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
++					      # but as the default
++					      # location of the library.
++      ;;
++    esac
++
++    case $cc_basename in
++      CC*)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      aCC*)
++	case $host_cpu in
++	hppa*64*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	  ;;
++	ia64*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	  ;;
++	*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	  ;;
++	esac
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++      *)
++	if test "$GXX" = yes; then
++	  if test $with_gnu_ld = no; then
++	    case $host_cpu in
++	    hppa*64*)
++	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      ;;
++	    ia64*)
++	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      ;;
++	    *)
++	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      ;;
++	    esac
++	  fi
++	else
++	  # FIXME: insert proper C++ library support
++	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
++	fi
++	;;
++    esac
++    ;;
++  interix3*)
++    _LT_AC_TAGVAR(hardcode_direct, $1)=no
++    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++    # Instead, shared libraries are loaded at an image base (0x10000000 by
++    # default) and relocated if they conflict, which is a slow very memory
++    # consuming and fragmenting process.  To avoid this, we pick a random,
++    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++    ;;
++  irix5* | irix6*)
++    case $cc_basename in
++      CC*)
++	# SGI C++
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++
++	# Archives containing C++ object files must be created using
++	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
++	# necessary to make sure instantiated templates are included
++	# in the archive.
++	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
++	;;
++      *)
++	if test "$GXX" = yes; then
++	  if test "$with_gnu_ld" = no; then
++	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	  else
++	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
++	  fi
++	fi
++	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++	;;
++    esac
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++    ;;
++  linux*)
++    case $cc_basename in
++      KCC*)
++	# Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	# KCC will only create a shared library if the output file
++	# ends with ".so" (or ".sl" for HP-UX), so rename the library
++	# to its proper name (with version) after linking.
++	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
++	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++
++	# Archives containing C++ object files must be created using
++	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
++	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++	;;
++      icpc*)
++	# Intel C++
++	with_gnu_ld=yes
++	# version 8.0 and above of icpc choke on multiply defined symbols
++	# if we add $predep_objects and $postdep_objects, however 7.1 and
++	# earlier do not add the objects themselves.
++	case `$CC -V 2>&1` in
++	*"Version 7."*)
++  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	  ;;
++	*)  # Version 8.0 or newer
++	  tmp_idyn=
++	  case $host_cpu in
++	    ia64*) tmp_idyn=' -i_dynamic';;
++	  esac
++  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	  ;;
++	esac
++	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	;;
++      pgCC*)
++        # Portland Group C++ compiler
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++        ;;
++      cxx*)
++	# Compaq C++
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++
++	runpath_var=LD_RUN_PATH
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++    esac
++    ;;
++  lynxos*)
++    # FIXME: insert proper C++ library support
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  m88k*)
++    # FIXME: insert proper C++ library support
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  mvs*)
++    case $cc_basename in
++      cxx*)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++    esac
++    ;;
++  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++      wlarc=
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++    fi
++    # Workaround some broken pre-1.5 toolchains
++    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++    ;;
++  openbsd2*)
++    # C++ shared libraries are fairly broken
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  openbsd*)
++    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++    fi
++    output_verbose_link_cmd='echo'
++    ;;
++  osf3*)
++    case $cc_basename in
++      KCC*)
++	# Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	# KCC will only create a shared library if the output file
++	# ends with ".so" (or ".sl" for HP-UX), so rename the library
++	# to its proper name (with version) after linking.
++	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	# Archives containing C++ object files must be created using
++	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
++	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
++
++	;;
++      RCC*)
++	# Rational C++ 2.4.1
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      cxx*)
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++      *)
++	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++
++	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	  # Commands to make compiler produce verbose output that lists
++	  # what "hidden" libraries, object files and flags are used when
++	  # linking a shared library.
++	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++
++	else
++	  # FIXME: insert proper C++ library support
++	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
++	fi
++	;;
++    esac
++    ;;
++  osf4* | osf5*)
++    case $cc_basename in
++      KCC*)
++	# Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	# KCC will only create a shared library if the output file
++	# ends with ".so" (or ".sl" for HP-UX), so rename the library
++	# to its proper name (with version) after linking.
++	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	# Archives containing C++ object files must be created using
++	# the KAI C++ compiler.
++	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
++	;;
++      RCC*)
++	# Rational C++ 2.4.1
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      cxx*)
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++	  echo "-hidden">> $lib.exp~
++	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
++	  $rm $lib.exp'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++      *)
++	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++
++	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	  # Commands to make compiler produce verbose output that lists
++	  # what "hidden" libraries, object files and flags are used when
++	  # linking a shared library.
++	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++
++	else
++	  # FIXME: insert proper C++ library support
++	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
++	fi
++	;;
++    esac
++    ;;
++  psos*)
++    # FIXME: insert proper C++ library support
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  sunos4*)
++    case $cc_basename in
++      CC*)
++	# Sun C++ 4.x
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      lcc*)
++	# Lucid
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++    esac
++    ;;
++  solaris*)
++    case $cc_basename in
++      CC*)
++	# Sun C++ 4.2, 5.x and Centerline C++
++        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
++	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++	case $host_os in
++	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++	  *)
++	    # The C++ compiler is used as linker so we must use $wl
++	    # flag to pass the commands to the underlying system
++	    # linker. We must also pass each convience library through
++	    # to the system linker between allextract/defaultextract.
++	    # The C++ compiler will combine linker options so we
++	    # cannot just pass the convience library names through
++	    # without $wl.
++	    # Supported since Solaris 2.6 (maybe 2.5.1?)
++	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
++	    ;;
++	esac
++	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++
++	output_verbose_link_cmd='echo'
++
++	# Archives containing C++ object files must be created using
++	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
++	# necessary to make sure instantiated templates are included
++	# in the archive.
++	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
++	;;
++      gcx*)
++	# Green Hills C++ Compiler
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++
++	# The C++ compiler must be used to create the archive.
++	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++	;;
++      *)
++	# GNU C++ compiler with Solaris linker
++	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
++	  if $CC --version | grep -v '^2\.7' > /dev/null; then
++	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
++	  else
++	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
++	    # platform.
++	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
++	  fi
++
++	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
++	fi
++	;;
++    esac
++    ;;
++  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
++    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++    runpath_var='LD_RUN_PATH'
++
++    case $cc_basename in
++      CC*)
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++      *)
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++    esac
++    ;;
++  sysv5* | sco3.2v5* | sco5v6*)
++    # Note: We can NOT use -z defs as we might desire, because we do not
++    # link with -lc, and that would cause any symbols used from libc to
++    # always be unresolved, which means just about no library would
++    # ever link correctly.  If we're not using GNU ld we use -z text
++    # though, which does catch some bad symbols but isn't as heavy-handed
++    # as -z defs.
++    # For security reasons, it is highly recommended that you always
++    # use absolute paths for naming shared libraries, and exclude the
++    # DT_RUNPATH tag from executables and libraries.  But doing so
++    # requires that you compile everything twice, which is a pain.
++    # So that behaviour is only enabled if SCOABSPATH is set to a
++    # non-empty value in the environment.  Most likely only useful for
++    # creating official distributions of packages.
++    # This is a hack until libtool officially supports absolute path
++    # names for shared libraries.
++    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++    runpath_var='LD_RUN_PATH'
++
++    case $cc_basename in
++      CC*)
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++      *)
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++    esac
++    ;;
++  tandem*)
++    case $cc_basename in
++      NCC*)
++	# NonStop-UX NCC 3.20
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	;;
++    esac
++    ;;
++  vxworks*)
++    # FIXME: insert proper C++ library support
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++  *)
++    # FIXME: insert proper C++ library support
++    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++    ;;
++esac
++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++_LT_AC_TAGVAR(GCC, $1)="$GXX"
++_LT_AC_TAGVAR(LD, $1)="$LD"
++
++AC_LIBTOOL_POSTDEP_PREDEP($1)
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++
++AC_LIBTOOL_CONFIG($1)
++
++AC_LANG_POP
++CC=$lt_save_CC
++LDCXX=$LD
++LD=$lt_save_LD
++GCC=$lt_save_GCC
++with_gnu_ldcxx=$with_gnu_ld
++with_gnu_ld=$lt_save_with_gnu_ld
++lt_cv_path_LDCXX=$lt_cv_path_LD
++lt_cv_path_LD=$lt_save_path_LD
++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++])# AC_LIBTOOL_LANG_CXX_CONFIG
++
++# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
++# ------------------------------------
++# Figure out "hidden" library dependencies from verbose
++# compiler output when linking a shared library.
++# Parse the compiler output and extract the necessary
++# objects, libraries and library flags.
++AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
++dnl we can't use the lt_simple_compile_test_code here,
++dnl because it contains code intended for an executable,
++dnl not a library.  It's possible we should let each
++dnl tag define a new lt_????_link_test_code variable,
++dnl but it's only used here...
++ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
++int a;
++void foo (void) { a = 0; }
++EOF
++],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
++class Foo
++{
++public:
++  Foo (void) { a = 0; }
++private:
++  int a;
++};
++EOF
++],[$1],[F77],[cat > conftest.$ac_ext <<EOF
++      subroutine foo
++      implicit none
++      integer*4 a
++      a=0
++      return
++      end
++EOF
++],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
++public class foo {
++  private int a;
++  public void bar (void) {
++    a = 0;
++  }
++};
++EOF
++])
++dnl Parse the compiler output and extract the necessary
++dnl objects, libraries and library flags.
++if AC_TRY_EVAL(ac_compile); then
++  # Parse the compiler output and extract the necessary
++  # objects, libraries and library flags.
++
++  # Sentinel used to keep track of whether or not we are before
++  # the conftest object file.
++  pre_test_object_deps_done=no
++
++  # The `*' in the case matches for architectures that use `case' in
++  # $output_verbose_cmd can trigger glob expansion during the loop
++  # eval without this substitution.
++  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
++
++  for p in `eval $output_verbose_link_cmd`; do
++    case $p in
++
++    -L* | -R* | -l*)
++       # Some compilers place space between "-{L,R}" and the path.
++       # Remove the space.
++       if test $p = "-L" \
++	  || test $p = "-R"; then
++	 prev=$p
++	 continue
++       else
++	 prev=
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++	 case $p in
++	 -L* | -R*)
++	   # Internal compiler library paths should come after those
++	   # provided the user.  The postdeps already come after the
++	   # user supplied libs so there is no need to process them.
++	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
++	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
++	   else
++	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
++	   fi
++	   ;;
++	 # The "-l" case would never come before the object being
++	 # linked, so don't bother handling this case.
++	 esac
++       else
++	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
++	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
++	 else
++	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
++	 fi
++       fi
++       ;;
++
++    *.$objext)
++       # This assumes that the test object file only shows up
++       # once in the compiler output.
++       if test "$p" = "conftest.$objext"; then
++	 pre_test_object_deps_done=yes
++	 continue
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
++	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
++	 else
++	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
++	 fi
++       else
++	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
++	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
++	 else
++	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
++	 fi
++       fi
++       ;;
++
++    *) ;; # Ignore the rest.
++
++    esac
++  done
++
++  # Clean up.
++  rm -f a.out a.exe
++else
++  echo "libtool.m4: error: problem compiling $1 test program"
++fi
++
++$rm -f confest.$objext
++
++# PORTME: override above test on systems where it is broken
++ifelse([$1],[CXX],
++[case $host_os in
++interix3*)
++  # Interix 3.5 installs completely hosed .la files for C++, so rather than
++  # hack all around it, let's just trust "g++" to DTRT.
++  _LT_AC_TAGVAR(predep_objects,$1)=
++  _LT_AC_TAGVAR(postdep_objects,$1)=
++  _LT_AC_TAGVAR(postdeps,$1)=
++  ;;
++
++solaris*)
++  case $cc_basename in
++  CC*)
++    # Adding this requires a known-good setup of shared libraries for
++    # Sun compiler versions before 5.6, else PIC objects from an old
++    # archive will be linked into the output, leading to subtle bugs.
++    _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun'
++    ;;
++  esac
++  ;;
++esac
++])
++
++case " $_LT_AC_TAGVAR(postdeps, $1) " in
++*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
++esac
++])# AC_LIBTOOL_POSTDEP_PREDEP
++
++# AC_LIBTOOL_LANG_F77_CONFIG
++# --------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined.  Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
++AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
++[AC_REQUIRE([AC_PROG_F77])
++AC_LANG_PUSH(Fortran 77)
++
++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++_LT_AC_TAGVAR(allow_undefined_flag, $1)=
++_LT_AC_TAGVAR(always_export_symbols, $1)=no
++_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
++_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_direct, $1)=no
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++_LT_AC_TAGVAR(hardcode_automatic, $1)=no
++_LT_AC_TAGVAR(module_cmds, $1)=
++_LT_AC_TAGVAR(module_expsym_cmds, $1)=
++_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++_LT_AC_TAGVAR(no_undefined_flag, $1)=
++_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++
++# Source file extension for f77 test sources.
++ac_ext=f
++
++# Object file extension for compiled f77 test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="      program t\n      end\n"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${F77-"f77"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++
++AC_MSG_CHECKING([if libtool supports shared libraries])
++AC_MSG_RESULT([$can_build_shared])
++
++AC_MSG_CHECKING([whether to build shared libraries])
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case $host_os in
++aix3*)
++  test "$enable_shared" = yes && enable_static=no
++  if test -n "$RANLIB"; then
++    archive_cmds="$archive_cmds~\$RANLIB \$lib"
++    postinstall_cmds='$RANLIB $lib'
++  fi
++  ;;
++aix4* | aix5*)
++  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++    test "$enable_shared" = yes && enable_static=no
++  fi
++  ;;
++esac
++AC_MSG_RESULT([$enable_shared])
++
++AC_MSG_CHECKING([whether to build static libraries])
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++AC_MSG_RESULT([$enable_static])
++
++_LT_AC_TAGVAR(GCC, $1)="$G77"
++_LT_AC_TAGVAR(LD, $1)="$LD"
++
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++
++AC_LIBTOOL_CONFIG($1)
++
++AC_LANG_POP
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_F77_CONFIG
++
++
++# AC_LIBTOOL_LANG_GCJ_CONFIG
++# --------------------------
++# Ensure that the configuration vars for the C compiler are
++# suitably defined.  Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
++AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
++[AC_LANG_SAVE
++
++# Source file extension for Java test sources.
++ac_ext=java
++
++# Object file extension for compiled Java test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${GCJ-"gcj"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++
++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
++
++AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
++AC_LIBTOOL_PROG_COMPILER_PIC($1)
++AC_LIBTOOL_PROG_CC_C_O($1)
++AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
++AC_LIBTOOL_PROG_LD_SHLIBS($1)
++AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
++AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
++
++AC_LIBTOOL_CONFIG($1)
++
++AC_LANG_RESTORE
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_GCJ_CONFIG
++
++
++# AC_LIBTOOL_LANG_RC_CONFIG
++# -------------------------
++# Ensure that the configuration vars for the Windows resource compiler are
++# suitably defined.  Those variables are subsequently used by
++# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
++AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
++AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
++[AC_LANG_SAVE
++
++# Source file extension for RC test sources.
++ac_ext=rc
++
++# Object file extension for compiled RC test sources.
++objext=o
++_LT_AC_TAGVAR(objext, $1)=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++_LT_AC_SYS_COMPILER
++
++# save warnings/boilerplate of simple test code
++_LT_COMPILER_BOILERPLATE
++_LT_LINKER_BOILERPLATE
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${RC-"windres"}
++compiler=$CC
++_LT_AC_TAGVAR(compiler, $1)=$CC
++_LT_CC_BASENAME([$compiler])
++_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++
++AC_LIBTOOL_CONFIG($1)
++
++AC_LANG_RESTORE
++CC="$lt_save_CC"
++])# AC_LIBTOOL_LANG_RC_CONFIG
++
++
++# AC_LIBTOOL_CONFIG([TAGNAME])
++# ----------------------------
++# If TAGNAME is not passed, then create an initial libtool script
++# with a default configuration from the untagged config vars.  Otherwise
++# add code to config.status for appending the configuration named by
++# TAGNAME from the matching tagged config vars.
++AC_DEFUN([AC_LIBTOOL_CONFIG],
++[# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++  # See if we are running on zsh, and set the options which allow our commands through
++  # without removal of \ escapes.
++  if test -n "${ZSH_VERSION+set}" ; then
++    setopt NO_GLOB_SUBST
++  fi
++  # Now quote all the things that may contain metacharacters while being
++  # careful not to overquote the AC_SUBSTed values.  We take copies of the
++  # variables and quote the copies for generation of the libtool script.
++  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++    SED SHELL STRIP \
++    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++    deplibs_check_method reload_flag reload_cmds need_locks \
++    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++    lt_cv_sys_global_symbol_to_c_name_address \
++    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++    old_postinstall_cmds old_postuninstall_cmds \
++    _LT_AC_TAGVAR(compiler, $1) \
++    _LT_AC_TAGVAR(CC, $1) \
++    _LT_AC_TAGVAR(LD, $1) \
++    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
++    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
++    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
++    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
++    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
++    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
++    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
++    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
++    _LT_AC_TAGVAR(old_archive_cmds, $1) \
++    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
++    _LT_AC_TAGVAR(predep_objects, $1) \
++    _LT_AC_TAGVAR(postdep_objects, $1) \
++    _LT_AC_TAGVAR(predeps, $1) \
++    _LT_AC_TAGVAR(postdeps, $1) \
++    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
++    _LT_AC_TAGVAR(archive_cmds, $1) \
++    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
++    _LT_AC_TAGVAR(postinstall_cmds, $1) \
++    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
++    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
++    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
++    _LT_AC_TAGVAR(no_undefined_flag, $1) \
++    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
++    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
++    _LT_AC_TAGVAR(hardcode_automatic, $1) \
++    _LT_AC_TAGVAR(module_cmds, $1) \
++    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
++    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
++    _LT_AC_TAGVAR(exclude_expsyms, $1) \
++    _LT_AC_TAGVAR(include_expsyms, $1); do
++
++    case $var in
++    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
++    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
++    _LT_AC_TAGVAR(archive_cmds, $1) | \
++    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
++    _LT_AC_TAGVAR(module_cmds, $1) | \
++    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
++    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
++    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
++    extract_expsyms_cmds | reload_cmds | finish_cmds | \
++    postinstall_cmds | postuninstall_cmds | \
++    old_postinstall_cmds | old_postuninstall_cmds | \
++    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++      # Double-quote double-evaled strings.
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++      ;;
++    *)
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++      ;;
++    esac
++  done
++
++  case $lt_echo in
++  *'\[$]0 --fallback-echo"')
++    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
++    ;;
++  esac
++
++ifelse([$1], [],
++  [cfgfile="${ofile}T"
++  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
++  $rm -f "$cfgfile"
++  AC_MSG_NOTICE([creating $ofile])],
++  [cfgfile="$ofile"])
++
++  cat <<__EOF__ >> "$cfgfile"
++ifelse([$1], [],
++[#! $SHELL
++
++# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
++# Free Software Foundation, Inc.
++#
++# This file is part of GNU Libtool:
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# A sed program that does not truncate output.
++SED=$lt_SED
++
++# Sed that helps us avoid accidentally triggering echo(1) options like -n.
++Xsed="$SED -e 1s/^X//"
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++# The names of the tagged configurations supported by this script.
++available_tags=
++
++# ### BEGIN LIBTOOL CONFIG],
++[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
++
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
++
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
++
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
++
++# A C compiler.
++LTCC=$lt_LTCC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
++# A language-specific compiler.
++CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
++
++# Is the compiler the GNU C compiler?
++with_gcc=$_LT_AC_TAGVAR(GCC, $1)
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# The linker used to build libraries.
++LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
++
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
++
++# A BSD-compatible nm program.
++NM=$lt_NM
++
++# A symbol stripping program
++STRIP=$lt_STRIP
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
++
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
++
++# Used on cygwin: assembler.
++AS="$AS"
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# How to pass a linker flag through the compiler.
++wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
++
++# Object file suffix (normally "o").
++objext="$ac_objext"
++
++# Old archive suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
++
++# Executable file suffix (normally "").
++exeext="$exeext"
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
++pic_mode=$pic_mode
++
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
++
++# Library versioning type.
++version_type=$version_type
++
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
++
++# List of archive names.  First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
++
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
++
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
++
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
++archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
++
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
++module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
++
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
++
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
++
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
++
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
++
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
++
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
++
++# Set to yes if exported symbols are required.
++always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
++
++# Symbols that must always be exported.
++include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
++
++ifelse([$1],[],
++[# ### END LIBTOOL CONFIG],
++[# ### END LIBTOOL TAG CONFIG: $tagname])
++
++__EOF__
++
++ifelse([$1],[], [
++  case $host_os in
++  aix3*)
++    cat <<\EOF >> "$cfgfile"
++
++# AIX sometimes has problems with the GCC collect2 program.  For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++  COLLECT_NAMES=
++  export COLLECT_NAMES
++fi
++EOF
++    ;;
++  esac
++
++  # We use sed instead of cat because bash on DJGPP gets confused if
++  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
++  # text mode, it properly converts lines to CR/LF.  This bash problem
++  # is reportedly fixed, but why not run on old versions too?
++  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
++
++  mv -f "$cfgfile" "$ofile" || \
++    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++  chmod +x "$ofile"
++])
++else
++  # If there is no Makefile yet, we rely on a make rule to execute
++  # `config.status --recheck' to rerun these tests and create the
++  # libtool script then.
++  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++  if test -f "$ltmain_in"; then
++    test -f Makefile && make "$ltmain"
++  fi
++fi
++])# AC_LIBTOOL_CONFIG
++
++
++# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
++# -------------------------------------------
++AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
++[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++
++_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
++
++if test "$GCC" = yes; then
++  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
++
++  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
++    lt_cv_prog_compiler_rtti_exceptions,
++    [-fno-rtti -fno-exceptions], [],
++    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
++fi
++])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
++
++
++# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
++# ---------------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
++[AC_REQUIRE([AC_CANONICAL_HOST])
++AC_REQUIRE([AC_PROG_NM])
++AC_REQUIRE([AC_OBJEXT])
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++AC_MSG_CHECKING([command to parse $NM output from $compiler object])
++AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
++[
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
++
++# Character class describing NM global symbol codes.
++symcode='[[BCDEGRST]]'
++
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
++
++# Transform an extracted symbol line into a proper C declaration
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
++
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
++
++# Define system-specific variables.
++case $host_os in
++aix*)
++  symcode='[[BCDT]]'
++  ;;
++cygwin* | mingw* | pw32*)
++  symcode='[[ABCDGISTW]]'
++  ;;
++hpux*) # Its linker distinguishes data from code symbols
++  if test "$host_cpu" = ia64; then
++    symcode='[[ABCDEGRST]]'
++  fi
++  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
++  ;;
++linux*)
++  if test "$host_cpu" = ia64; then
++    symcode='[[ABCDGIRSTW]]'
++    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
++  fi
++  ;;
++irix* | nonstopux*)
++  symcode='[[BCDEGRST]]'
++  ;;
++osf*)
++  symcode='[[BCDEGQRST]]'
++  ;;
++solaris*)
++  symcode='[[BDRT]]'
++  ;;
++sco3.2v5*)
++  symcode='[[DT]]'
++  ;;
++sysv4.2uw2*)
++  symcode='[[DT]]'
++  ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++  symcode='[[ABDT]]'
++  ;;
++sysv4)
++  symcode='[[DFNSTU]]'
++  ;;
++esac
++
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++  ;;
++esac
++
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++  symcode='[[ABCDGIRSTW]]' ;;
++esac
++
++# Try without a prefix undercore, then with it.
++for ac_symprfx in "" "_"; do
++
++  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++  symxfrm="\\1 $ac_symprfx\\2 \\2"
++
++  # Write the raw and C identifiers.
++  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++
++  # Check to see that the pipe works correctly.
++  pipe_works=no
++
++  rm -f conftest*
++  cat > conftest.$ac_ext <<EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++EOF
++
++  if AC_TRY_EVAL(ac_compile); then
++    # Now try to grab the symbols.
++    nlist=conftest.nm
++    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
++      # Try sorting and uniquifying the output.
++      if sort "$nlist" | uniq > "$nlist"T; then
++	mv -f "$nlist"T "$nlist"
++      else
++	rm -f "$nlist"T
++      fi
++
++      # Make sure that we snagged all the symbols we need.
++      if grep ' nm_test_var$' "$nlist" >/dev/null; then
++	if grep ' nm_test_func$' "$nlist" >/dev/null; then
++	  cat <<EOF > conftest.$ac_ext
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++EOF
++	  # Now generate the symbol file.
++	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
++
++	  cat <<EOF >> conftest.$ac_ext
++#if defined (__STDC__) && __STDC__
++# define lt_ptr_t void *
++#else
++# define lt_ptr_t char *
++# define const
++#endif
++
++/* The mapping between symbol names and symbols. */
++const struct {
++  const char *name;
++  lt_ptr_t address;
++}
++lt_preloaded_symbols[[]] =
++{
++EOF
++	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
++	  cat <<\EOF >> conftest.$ac_ext
++  {0, (lt_ptr_t) 0}
++};
++
++#ifdef __cplusplus
++}
++#endif
++EOF
++	  # Now try linking the two files.
++	  mv conftest.$ac_objext conftstm.$ac_objext
++	  lt_save_LIBS="$LIBS"
++	  lt_save_CFLAGS="$CFLAGS"
++	  LIBS="conftstm.$ac_objext"
++	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
++	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
++	    pipe_works=yes
++	  fi
++	  LIBS="$lt_save_LIBS"
++	  CFLAGS="$lt_save_CFLAGS"
++	else
++	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
++	fi
++      else
++	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
++      fi
++    else
++      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
++    fi
++  else
++    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
++    cat conftest.$ac_ext >&5
++  fi
++  rm -f conftest* conftst*
++
++  # Do not use the global_symbol_pipe unless it works.
++  if test "$pipe_works" = yes; then
++    break
++  else
++    lt_cv_sys_global_symbol_pipe=
++  fi
++done
++])
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++  lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++  AC_MSG_RESULT(failed)
++else
++  AC_MSG_RESULT(ok)
++fi
++]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
++
++
++# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
++# ---------------------------------------
++AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
++[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
++_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
++
++AC_MSG_CHECKING([for $compiler option to produce PIC])
++ ifelse([$1],[CXX],[
++  # C++ specific cases for pic, static, wl, etc.
++  if test "$GXX" = yes; then
++    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++    case $host_os in
++    aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++    amigaos*)
++      # FIXME: we need at least 68020 code to build shared libraries, but
++      # adding the `-m68020' flag to GCC prevents building anything better,
++      # like `-m68040'.
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++      ;;
++    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++    mingw* | os2* | pw32*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
++      ;;
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++      ;;
++    *djgpp*)
++      # DJGPP does not support shared libraries at all
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++      ;;
++    interix3*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++      fi
++      ;;
++    hpux*)
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	;;
++      *)
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	;;
++      esac
++      ;;
++    *)
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++    esac
++  else
++    case $host_os in
++      aix4* | aix5*)
++	# All AIX code is PIC.
++	if test "$host_cpu" = ia64; then
++	  # AIX 5 now supports IA64 processor
++	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	else
++	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++	fi
++	;;
++      chorus*)
++	case $cc_basename in
++	cxch68*)
++	  # Green Hills C++ Compiler
++	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
++	  ;;
++	esac
++	;;
++       darwin*)
++         # PIC is the default on this platform
++         # Common symbols not allowed in MH_DYLIB files
++         case $cc_basename in
++           xlc*)
++           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
++           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++           ;;
++         esac
++       ;;
++      dgux*)
++	case $cc_basename in
++	  ec++*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    ;;
++	  ghcx*)
++	    # Green Hills C++ Compiler
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      freebsd* | kfreebsd*-gnu | dragonfly*)
++	# FreeBSD uses GNU C++
++	;;
++      hpux9* | hpux10* | hpux11*)
++	case $cc_basename in
++	  CC*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++	    if test "$host_cpu" != ia64; then
++	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++	    fi
++	    ;;
++	  aCC*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++	    case $host_cpu in
++	    hppa*64*|ia64*)
++	      # +Z the default
++	      ;;
++	    *)
++	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++	      ;;
++	    esac
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      interix*)
++	# This is c89, which is MS Visual C++ (no shared libs)
++	# Anyone wants to do a port?
++	;;
++      irix5* | irix6* | nonstopux*)
++	case $cc_basename in
++	  CC*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++	    # CC pic flag -KPIC is the default.
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      linux*)
++	case $cc_basename in
++	  KCC*)
++	    # KAI C++ Compiler
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	    ;;
++	  icpc* | ecpc*)
++	    # Intel C++
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++	    ;;
++	  pgCC*)
++	    # Portland Group C++ compiler.
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    ;;
++	  cxx*)
++	    # Compaq C++
++	    # Make sure the PIC flag is empty.  It appears that all Alpha
++	    # Linux and Compaq Tru64 Unix objects are PIC.
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      lynxos*)
++	;;
++      m88k*)
++	;;
++      mvs*)
++	case $cc_basename in
++	  cxx*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++	;;
++      osf3* | osf4* | osf5*)
++	case $cc_basename in
++	  KCC*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
++	    ;;
++	  RCC*)
++	    # Rational C++ 2.4.1
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    ;;
++	  cxx*)
++	    # Digital/Compaq C++
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    # Make sure the PIC flag is empty.  It appears that all Alpha
++	    # Linux and Compaq Tru64 Unix objects are PIC.
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      psos*)
++	;;
++      solaris*)
++	case $cc_basename in
++	  CC*)
++	    # Sun C++ 4.2, 5.x and Centerline C++
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++	    ;;
++	  gcx*)
++	    # Green Hills C++ Compiler
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      sunos4*)
++	case $cc_basename in
++	  CC*)
++	    # Sun C++ 4.x
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    ;;
++	  lcc*)
++	    # Lucid
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      tandem*)
++	case $cc_basename in
++	  NCC*)
++	    # NonStop-UX NCC 3.20
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++	case $cc_basename in
++	  CC*)
++	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++	    ;;
++	esac
++	;;
++      vxworks*)
++	;;
++      *)
++	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++	;;
++    esac
++  fi
++],
++[
++  if test "$GCC" = yes; then
++    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      # FIXME: we need at least 68020 code to build shared libraries, but
++      # adding the `-m68020' flag to GCC prevents building anything better,
++      # like `-m68040'.
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
++      ;;
++
++    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
++      ;;
++
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
++      ;;
++
++    interix3*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      enable_shared=no
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
++      fi
++      ;;
++
++    hpux*)
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++	;;
++      esac
++      ;;
++
++    *)
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      else
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++      darwin*)
++        # PIC is the default on this platform
++        # Common symbols not allowed in MH_DYLIB files
++       case $cc_basename in
++         xlc*)
++         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
++         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++         ;;
++       esac
++       ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
++      ;;
++
++    hpux9* | hpux10* | hpux11*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
++	;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # PIC (with -KPIC) is the default.
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    newsos6)
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    linux*)
++      case $cc_basename in
++      icc* | ecc*)
++	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
++        ;;
++      pgcc* | pgf77* | pgf90* | pgf95*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++	# which looks to be a dead project)
++	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++        ;;
++      ccc*)
++        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++        # All Alpha code is PIC.
++        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++        ;;
++      esac
++      ;;
++
++    osf3* | osf4* | osf5*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      # All OSF/1 code is PIC.
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
++      ;;
++
++    solaris*)
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95*)
++	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
++      *)
++	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
++      esac
++      ;;
++
++    sunos4*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
++	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      fi
++      ;;
++
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    unicos*)
++      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
++      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++
++    uts4*)
++      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
++      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
++      ;;
++
++    *)
++      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
++      ;;
++    esac
++  fi
++])
++AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
++  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
++    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
++    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
++    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
++     "" | " "*) ;;
++     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
++     esac],
++    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
++fi
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
++    ;;
++  *)
++    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
++    ;;
++esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
++  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
++  $lt_tmp_static_flag,
++  [],
++  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
++])
++
++
++# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
++# ------------------------------------
++# See if the linker supports building shared libraries.
++AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
++[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
++ifelse([$1],[CXX],[
++  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  case $host_os in
++  aix4* | aix5*)
++    # If we're using GNU nm, then we don't want the "-C" option.
++    # -C means demangle to AIX nm, but means don't demangle with GNU nm
++    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++    else
++      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++    fi
++    ;;
++  pw32*)
++    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
++  ;;
++  cygwin* | mingw*)
++    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
++  ;;
++  kfreebsd*-gnu)
++    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++  ;;
++  linux*)
++    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++  ;;
++  *)
++    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  ;;
++  esac
++],[
++  runpath_var=
++  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
++  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
++  _LT_AC_TAGVAR(archive_cmds, $1)=
++  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
++  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
++  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
++  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
++  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
++  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++  _LT_AC_TAGVAR(hardcode_direct, $1)=no
++  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
++  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
++  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
++  _LT_AC_TAGVAR(module_cmds, $1)=
++  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
++  _LT_AC_TAGVAR(always_export_symbols, $1)=no
++  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  _LT_AC_TAGVAR(include_expsyms, $1)=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  extract_expsyms_cmds=
++  # Just being paranoid about ensuring that cc_basename is set.
++  _LT_CC_BASENAME([$compiler])
++  case $host_os in
++  cygwin* | mingw* | pw32*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
++    ;;
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
++    ;;
++  openbsd*)
++    with_gnu_ld=no
++    ;;
++  esac
++
++  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
++  if test "$with_gnu_ld" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
++
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
++    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
++	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++      else
++  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++    supports_anon_versioning=no
++    case `$LD -v 2>/dev/null` in
++      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
++
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix3* | aix4* | aix5*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	cat <<EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++EOF
++      fi
++      ;;
++
++    amigaos*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++
++      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
++      # that the semantics of dynamic libraries on AmigaOS, at least up
++      # to version 4, is to share data among multiple programs linked
++      # with the same dynamic library.  Since this doesn't match the
++      # behavior of shared libraries on other platforms, we can't use
++      # them.
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++    beos*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++	# support --undefined.  This deserves some investigation.  FIXME
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
++      # as there is no search path for DLLs.
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_AC_TAGVAR(always_export_symbols, $1)=no
++      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
++
++      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	# If the export-symbols file already is a .def file (1st line
++	# is EXPORTS), use it as is; otherwise, prepend...
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	  cp $export_symbols $output_objdir/$soname.def;
++	else
++	  echo EXPORTS > $output_objdir/$soname.def;
++	  cat $export_symbols >> $output_objdir/$soname.def;
++	fi~
++	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    interix3*)
++      _LT_AC_TAGVAR(hardcode_direct, $1)=no
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++
++    linux*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	tmp_addflag=
++	case $cc_basename,$host_cpu in
++	pgcc*)				# Portland Group C compiler
++	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag'
++	  ;;
++	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
++	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag -Mnomain' ;;
++	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
++	  tmp_addflag=' -i_dynamic' ;;
++	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
++	  tmp_addflag=' -i_dynamic -nofor_main' ;;
++	ifc* | ifort*)			# Intel Fortran compiler
++	  tmp_addflag=' -nofor_main' ;;
++	esac
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++	if test $supports_anon_versioning = yes; then
++	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
++  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++  $echo "local: *; };" >> $output_objdir/$libname.ver~
++	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++	fi
++	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
++      else
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++	wlarc=
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
++
++    solaris*)
++      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	cat <<EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++EOF
++      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) 
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++	;;
++	*)
++	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
++	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
++	  else
++	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
++	  fi
++	;;
++      esac
++      ;;
++
++    sunos4*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	_LT_AC_TAGVAR(ld_shlibs, $1)=no
++      fi
++      ;;
++    esac
++
++    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
++      runpath_var=
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
++      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
++    fi
++  else
++    # PORTME fill in a description of your system's linker (not GNU ld)
++    case $host_os in
++    aix3*)
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
++      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++	# Neither direct hardcoding nor static linking is supported with a
++	# broken collect2.
++	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
++      fi
++      ;;
++
++    aix4* | aix5*)
++      if test "$host_cpu" = ia64; then
++	# On IA64, the linker does run time linking by default, so we don't
++	# have to do anything special.
++	aix_use_runtimelinking=no
++	exp_sym_flag='-Bexport'
++	no_entry_flag=""
++      else
++	# If we're using GNU nm, then we don't want the "-C" option.
++	# -C means demangle to AIX nm, but means don't demangle with GNU nm
++	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++	else
++	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
++	fi
++	aix_use_runtimelinking=no
++
++	# Test if we are trying to use run time linking or normal
++	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
++	# need to do runtime linking.
++	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++	  for ld_flag in $LDFLAGS; do
++  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++  	    aix_use_runtimelinking=yes
++  	    break
++  	  fi
++	  done
++	  ;;
++	esac
++
++	exp_sym_flag='-bexport'
++	no_entry_flag='-bnoentry'
++      fi
++
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++      _LT_AC_TAGVAR(archive_cmds, $1)=''
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++
++      if test "$GCC" = yes; then
++	case $host_os in aix4.[[012]]|aix4.[[012]].*)
++	# We only want to do this on AIX 4.2 and lower, the check
++	# below for broken collect2 doesn't work under 4.3+
++	  collect2name=`${CC} -print-prog-name=collect2`
++	  if test -f "$collect2name" && \
++  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
++	  then
++  	  # We have reworked collect2
++  	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++	  else
++  	  # We have old collect2
++  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
++  	  # It fails to find uninstalled libraries when the uninstalled
++  	  # path is not listed in the libpath.  Setting hardcode_minus_L
++  	  # to unsupported forces relinking
++  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
++	  fi
++	  ;;
++	esac
++	shared_flag='-shared'
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag="$shared_flag "'${wl}-G'
++	fi
++      else
++	# not using gcc
++	if test "$host_cpu" = ia64; then
++  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++  	# chokes on -Wl,-G. The following line is correct:
++	  shared_flag='-G'
++	else
++	  if test "$aix_use_runtimelinking" = yes; then
++	    shared_flag='${wl}-G'
++	  else
++	    shared_flag='${wl}-bM:SRE'
++	  fi
++	fi
++      fi
++
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
++      if test "$aix_use_runtimelinking" = yes; then
++	# Warning - without using the other runtime loading flags (-brtl),
++	# -berok will link without error, but may produce a broken library.
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
++       # Determine the default libpath from the value encoded in an empty executable.
++       _LT_AC_SYS_LIBPATH_AIX
++       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++       else
++	if test "$host_cpu" = ia64; then
++	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
++	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
++	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++	else
++	 # Determine the default libpath from the value encoded in an empty executable.
++	 _LT_AC_SYS_LIBPATH_AIX
++	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
++	  # Warning - without using the other run time loading flags,
++	  # -berok will link without error, but may produce a broken library.
++	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
++	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
++	  # Exported symbols can be pulled into shared objects from archives
++	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
++	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++	  # This is similar to how AIX traditionally builds its shared libraries.
++	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++	fi
++      fi
++      ;;
++
++    amigaos*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      # see comment about different semantics on the GNU ld section
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++    bsdi[[45]]*)
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++      # Tell ltmain to make .lib files, not .a files.
++      libext=lib
++      # Tell ltmain to make .dll files, not .so files.
++      shrext_cmds=".dll"
++      # FIXME: Setting linknames here is a bad hack.
++      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++      # The linker will automatically build a .lib file if we build a DLL.
++      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
++      # FIXME: Should let the user specify the lib program.
++      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
++      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
++      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
++      ;;
++
++    darwin* | rhapsody*)
++      case $host_os in
++        rhapsody* | darwin1.[[012]])
++         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
++         ;;
++       *) # Darwin 1.3 on
++         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++         else
++           case ${MACOSX_DEPLOYMENT_TARGET} in
++             10.[[012]])
++               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++               ;;
++             10.*)
++               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
++               ;;
++           esac
++         fi
++         ;;
++      esac
++      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_AC_TAGVAR(hardcode_direct, $1)=no
++      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
++      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++    if test "$GCC" = yes ; then
++    	output_verbose_link_cmd='echo'
++        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    else
++      case $cc_basename in
++        xlc*)
++         output_verbose_link_cmd='echo'
++         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
++         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          ;;
++       *)
++         _LT_AC_TAGVAR(ld_shlibs, $1)=no
++          ;;
++      esac
++    fi
++      ;;
++
++    dgux*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    freebsd1*)
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++      ;;
++
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++      
++    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
++    kfreebsd*-gnu)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=no
++      ;;
++
++    hpux9*)
++      if test "$GCC" = yes; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      ;;
++
++    hpux10*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
++	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++	# hardcode_minus_L: Not really in the search PATH,
++	# but as the default location of the library.
++	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      fi
++      ;;
++
++    hpux11*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	case $host_cpu in
++	hppa*64*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      else
++	case $host_cpu in
++	hppa*64*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      fi
++      if test "$with_gnu_ld" = no; then
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
++	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++
++	case $host_cpu in
++	hppa*64*|ia64*)
++	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
++	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++	  ;;
++	*)
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++
++	  # hardcode_minus_L: Not really in the search PATH,
++	  # but as the default location of the library.
++	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++	  ;;
++	esac
++      fi
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    newsos6)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    openbsd*)
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
++      else
++       case $host_os in
++	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++	   ;;
++	 *)
++	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
++	   ;;
++       esac
++      fi
++      ;;
++
++    os2*)
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
++      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
++
++    osf3*)
++      if test "$GCC" = yes; then
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++      ;;
++
++    osf4* | osf5*)	# as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
++      else
++	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
++	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
++
++	# Both c and cxx compiler support -rpath directly
++	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
++      ;;
++
++    solaris*)
++      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
++      if test "$GCC" = yes; then
++	wlarc='${wl}'
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
++      else
++	wlarc=''
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      case $host_os in
++      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
++      *)
++ 	# The compiler driver will combine linker options so we
++ 	# cannot just pass the convience library names through
++ 	# without $wl, iff we do not link with $LD.
++ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
++ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
++ 	case $wlarc in
++ 	'')
++ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
++ 	*)
++ 	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
++ 	esac ;;
++      esac
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++      ;;
++
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++	# Use $CC to link under sequent, because it throws in some extra .o
++	# files that make .init and .fini sections work.
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
++      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    sysv4)
++      case $host_vendor in
++	sni)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
++	;;
++	siemens)
++	  ## LD is ld it makes a PLAMLIB
++	  ## CC just makes a GrossModule.
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
++        ;;
++	motorola)
++	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
++	;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    sysv4.3*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++	runpath_var=LD_RUN_PATH
++	hardcode_runpath_var=yes
++	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
++      fi
++      ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*)
++      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
++      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
++      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
++      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
++      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    uts4*)
++      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
++      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
++      ;;
++
++    *)
++      _LT_AC_TAGVAR(ld_shlibs, $1)=no
++      ;;
++    esac
++  fi
++])
++AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
++test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
++x|xyes)
++  # Assume -lc should be added
++  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $_LT_AC_TAGVAR(archive_cmds, $1) in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
++      $rm conftest*
++      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
++	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
++        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
++        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
++        then
++	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
++        else
++	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
++        fi
++        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $rm conftest*
++      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
++      ;;
++    esac
++  fi
++  ;;
++esac
++])# AC_LIBTOOL_PROG_LD_SHLIBS
++
++
++# _LT_AC_FILE_LTDLL_C
++# -------------------
++# Be careful that the start marker always follows a newline.
++AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
++# /* ltdll.c starts here */
++# #define WIN32_LEAN_AND_MEAN
++# #include <windows.h>
++# #undef WIN32_LEAN_AND_MEAN
++# #include <stdio.h>
++#
++# #ifndef __CYGWIN__
++# #  ifdef __CYGWIN32__
++# #    define __CYGWIN__ __CYGWIN32__
++# #  endif
++# #endif
++#
++# #ifdef __cplusplus
++# extern "C" {
++# #endif
++# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
++# #ifdef __cplusplus
++# }
++# #endif
++#
++# #ifdef __CYGWIN__
++# #include <cygwin/cygwin_dll.h>
++# DECLARE_CYGWIN_DLL( DllMain );
++# #endif
++# HINSTANCE __hDllInstance_base;
++#
++# BOOL APIENTRY
++# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
++# {
++#   __hDllInstance_base = hInst;
++#   return TRUE;
++# }
++# /* ltdll.c ends here */
++])# _LT_AC_FILE_LTDLL_C
++
++
++# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
++# ---------------------------------
++AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
++
++
++# old names
++AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
++AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
++AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
++AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
++AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
++AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
++AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
++
++# This is just to silence aclocal about the macro not being used
++ifelse([AC_DISABLE_FAST_INSTALL])
++
++AC_DEFUN([LT_AC_PROG_GCJ],
++[AC_CHECK_TOOL(GCJ, gcj, no)
++  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
++  AC_SUBST(GCJFLAGS)
++])
++
++AC_DEFUN([LT_AC_PROG_RC],
++[AC_CHECK_TOOL(RC, windres, no)
++])
++
++# NOTE: This macro has been submitted for inclusion into   #
++#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
++#  a released version of Autoconf we should remove this    #
++#  macro and use it instead.                               #
++# LT_AC_PROG_SED
++# --------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible.  Prefer GNU sed if found.
++AC_DEFUN([LT_AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for lt_ac_prog in sed gsed; do
++    for ac_exec_ext in '' $ac_executable_extensions; do
++      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
++      fi
++    done
++  done
++done
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++  test ! -f $lt_ac_sed && continue
++  cat /dev/null > conftest.in
++  lt_ac_count=0
++  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++  # Check for GNU sed and select it if it is found.
++  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++    lt_cv_path_SED=$lt_ac_sed
++    break
++  fi
++  while true; do
++    cat conftest.in conftest.in >conftest.tmp
++    mv conftest.tmp conftest.in
++    cp conftest.in conftest.nl
++    echo >>conftest.nl
++    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++    cmp -s conftest.out conftest.nl || break
++    # 10000 chars as input seems more than enough
++    test $lt_ac_count -gt 10 && break
++    lt_ac_count=`expr $lt_ac_count + 1`
++    if test $lt_ac_count -gt $lt_ac_max; then
++      lt_ac_max=$lt_ac_count
++      lt_cv_path_SED=$lt_ac_sed
++    fi
++  done
++done
++])
++SED=$lt_cv_path_SED
++AC_MSG_RESULT([$SED])
++])
+ 
+ # Configure paths for SDL
+ # Sam Lantinga 9/21/99
+@@ -20,7 +6426,7 @@ dnl PARTICULAR PURPOSE.
+ dnl AM_PATH_SDL([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
+ dnl Test for SDL, and define SDL_CFLAGS and SDL_LIBS
+ dnl
+-AC_DEFUN(AM_PATH_SDL,
++AC_DEFUN([AM_PATH_SDL],
+ [dnl 
+ dnl Get the cflags and libraries from the sdl-config script
+ dnl
+@@ -44,7 +6450,9 @@ AC_ARG_ENABLE(sdltest, [  --disable-sdlt
+      fi
+   fi
+ 
+-  AC_PATH_PROG(SDL_CONFIG, sdl-config, no)
++  AC_REQUIRE([AC_CANONICAL_TARGET])
++  PATH="$prefix/bin:$prefix/usr/bin:$PATH"
++  AC_PATH_PROG(SDL_CONFIG, sdl-config, no, [$PATH])
+   min_sdl_version=ifelse([$1], ,0.11.0,$1)
+   AC_MSG_CHECKING(for SDL - version >= $min_sdl_version)
+   no_sdl=""
+@@ -62,8 +6470,10 @@ AC_ARG_ENABLE(sdltest, [  --disable-sdlt
+            sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
+     if test "x$enable_sdltest" = "xyes" ; then
+       ac_save_CFLAGS="$CFLAGS"
++      ac_save_CXXFLAGS="$CXXFLAGS"
+       ac_save_LIBS="$LIBS"
+       CFLAGS="$CFLAGS $SDL_CFLAGS"
++      CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+       LIBS="$LIBS $SDL_LIBS"
+ dnl
+ dnl Now check if the installed SDL is sufficiently new. (Also sanity
+@@ -148,10 +6558,16 @@ int main (int argc, char *argv[])
+        else
+           echo "*** Could not run SDL test program, checking why..."
+           CFLAGS="$CFLAGS $SDL_CFLAGS"
++          CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+           LIBS="$LIBS $SDL_LIBS"
+           AC_TRY_LINK([
+ #include <stdio.h>
+ #include "SDL.h"
++
++int main(int argc, char *argv[])
++{ return 0; }
++#undef  main
++#define main K_and_R_C_main
+ ],      [ return 0; ],
+         [ echo "*** The test program compiled, but did not run. This usually means"
+           echo "*** that the run-time linker is not finding SDL or finding the wrong"
+@@ -167,10 +6583,12 @@ int main (int argc, char *argv[])
+           echo "*** or that you have moved SDL since it was installed. In the latter case, you"
+           echo "*** may want to edit the sdl-config script: $SDL_CONFIG" ])
+           CFLAGS="$ac_save_CFLAGS"
++          CXXFLAGS="$ac_save_CXXFLAGS"
+           LIBS="$ac_save_LIBS"
+        fi
+      fi
+      SDL_CFLAGS=""
++     SDL_CXXFLAGS=""
+      SDL_LIBS=""
+      ifelse([$3], , :, [$3])
+   fi
+@@ -179,503 +6597,728 @@ int main (int argc, char *argv[])
+   rm -f conf.sdltest
+ ])
+ 
+-# serial 40 AC_PROG_LIBTOOL
+-AC_DEFUN(AC_PROG_LIBTOOL,
+-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+-
+-# Save cache, so that ltconfig can load it
+-AC_CACHE_SAVE
+-
+-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+-|| AC_MSG_ERROR([libtool configure failed])
++# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+ 
+-# Reload cache, that may have been modified by ltconfig
+-AC_CACHE_LOAD
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+ 
+-# This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION so it can be traced.
++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++	 [AM_AUTOMAKE_VERSION([1.9.6])])
+ 
+-# Always use our own libtool.
+-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+-AC_SUBST(LIBTOOL)dnl
++# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+ 
+-# Redirect the config.log output again, so that the ltconfig log is not
+-# clobbered by the next message.
+-exec 5>>./config.log
++# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
++# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
++# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
++#
++# Of course, Automake must honor this variable whenever it calls a
++# tool from the auxiliary directory.  The problem is that $srcdir (and
++# therefore $ac_aux_dir as well) can be either absolute or relative,
++# depending on how configure is run.  This is pretty annoying, since
++# it makes $ac_aux_dir quite unusable in subdirectories: in the top
++# source directory, any form will work fine, but in subdirectories a
++# relative path needs to be adjusted first.
++#
++# $ac_aux_dir/missing
++#    fails when called from a subdirectory if $ac_aux_dir is relative
++# $top_srcdir/$ac_aux_dir/missing
++#    fails if $ac_aux_dir is absolute,
++#    fails when called from a subdirectory in a VPATH build with
++#          a relative $ac_aux_dir
++#
++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
++# are both prefixed by $srcdir.  In an in-source build this is usually
++# harmless because $srcdir is `.', but things will broke when you
++# start a VPATH build or use an absolute $srcdir.
++#
++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
++# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
++#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
++# and then we would define $MISSING as
++#   MISSING="\${SHELL} $am_aux_dir/missing"
++# This will work as long as MISSING is not called from configure, because
++# unfortunately $(top_srcdir) has no meaning in configure.
++# However there are other variables, like CC, which are often used in
++# configure, and could therefore not use this "fixed" $ac_aux_dir.
++#
++# Another solution, used here, is to always expand $ac_aux_dir to an
++# absolute PATH.  The drawback is that using absolute paths prevent a
++# configured tree to be moved without reconfiguration.
++
++AC_DEFUN([AM_AUX_DIR_EXPAND],
++[dnl Rely on autoconf to set up CDPATH properly.
++AC_PREREQ([2.50])dnl
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
+ ])
+ 
+-AC_DEFUN(AC_LIBTOOL_SETUP,
+-[AC_PREREQ(2.13)dnl
+-AC_REQUIRE([AC_ENABLE_SHARED])dnl
+-AC_REQUIRE([AC_ENABLE_STATIC])dnl
+-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-AC_REQUIRE([AC_PROG_RANLIB])dnl
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_PROG_LD])dnl
+-AC_REQUIRE([AC_PROG_NM])dnl
+-AC_REQUIRE([AC_PROG_LN_S])dnl
+-dnl
++# AM_CONDITIONAL                                            -*- Autoconf -*-
+ 
+-case "$target" in
+-NONE) lt_target="$host" ;;
+-*) lt_target="$target" ;;
+-esac
+-
+-# Check for any special flags to pass to ltconfig.
+-libtool_flags="--cache-file=$cache_file"
+-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
+-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
+-[libtool_flags="$libtool_flags --enable-dlopen"])
+-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+-[libtool_flags="$libtool_flags --enable-win32-dll"])
+-AC_ARG_ENABLE(libtool-lock,
+-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
+-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 7
++
++# AM_CONDITIONAL(NAME, SHELL-CONDITION)
++# -------------------------------------
++# Define a conditional.
++AC_DEFUN([AM_CONDITIONAL],
++[AC_PREREQ(2.52)dnl
++ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
++	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
++AC_SUBST([$1_TRUE])
++AC_SUBST([$1_FALSE])
++if $2; then
++  $1_TRUE=
++  $1_FALSE='#'
++else
++  $1_TRUE='#'
++  $1_FALSE=
++fi
++AC_CONFIG_COMMANDS_PRE(
++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
++  AC_MSG_ERROR([[conditional "$1" was never defined.
++Usually this means the macro was only invoked conditionally.]])
++fi])])
+ 
+-# Some flags need to be propagated to the compiler or linker for good
+-# libtool support.
+-case "$lt_target" in
+-*-*-irix6*)
+-  # Find out which ABI we are using.
+-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+-  if AC_TRY_EVAL(ac_compile); then
+-    case "`/usr/bin/file conftest.o`" in
+-    *32-bit*)
+-      LD="${LD-ld} -32"
+-      ;;
+-    *N32*)
+-      LD="${LD-ld} -n32"
+-      ;;
+-    *64-bit*)
+-      LD="${LD-ld} -64"
+-      ;;
+-    esac
+-  fi
+-  rm -rf conftest*
+-  ;;
+ 
+-*-*-sco3.2v5*)
+-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+-  SAVE_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS -belf"
+-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
+-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+-    CFLAGS="$SAVE_CFLAGS"
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 8
++
++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
++# written in clear, in which case automake, when reading aclocal.m4,
++# will think it sees a *use*, and therefore will trigger all it's
++# C support machinery.  Also note that it means that autoscan, seeing
++# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
++
++
++# _AM_DEPENDENCIES(NAME)
++# ----------------------
++# See how the compiler implements dependency checking.
++# NAME is "CC", "CXX", "GCJ", or "OBJC".
++# We try a few techniques and use that to set a single cache variable.
++#
++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
++# dependency, and given that the user is not expected to run this macro,
++# just rely on AC_PROG_CC.
++AC_DEFUN([_AM_DEPENDENCIES],
++[AC_REQUIRE([AM_SET_DEPDIR])dnl
++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
++AC_REQUIRE([AM_MAKE_INCLUDE])dnl
++AC_REQUIRE([AM_DEP_TRACK])dnl
++
++ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
++       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
++       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
++       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
++                   [depcc="$$1"   am_compiler_list=])
++
++AC_CACHE_CHECK([dependency style of $depcc],
++               [am_cv_$1_dependencies_compiler_type],
++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++  # We make a subdir and do the tests there.  Otherwise we can end up
++  # making bogus files that we don't know about and never remove.  For
++  # instance it was reported that on HP-UX the gcc test will end up
++  # making a dummy file named `D' -- because `-MD' means `put the output
++  # in D'.
++  mkdir conftest.dir
++  # Copy depcomp to subdir because otherwise we won't find it if we're
++  # using a relative directory.
++  cp "$am_depcomp" conftest.dir
++  cd conftest.dir
++  # We will build objects and dependencies in a subdirectory because
++  # it helps to detect inapplicable dependency modes.  For instance
++  # both Tru64's cc and ICC support -MD to output dependencies as a
++  # side effect of compilation, but ICC will put the dependencies in
++  # the current directory while Tru64 will put them in the object
++  # directory.
++  mkdir sub
++
++  am_cv_$1_dependencies_compiler_type=none
++  if test "$am_compiler_list" = ""; then
++     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+   fi
+-  ;;
++  for depmode in $am_compiler_list; do
++    # Setup a source with many dependencies, because some compilers
++    # like to wrap large dependency lists on column 80 (with \), and
++    # we should not choose a depcomp mode which is confused by this.
++    #
++    # We need to recreate these files for each test, as the compiler may
++    # overwrite some of them when testing with obscure command lines.
++    # This happens at least with the AIX C compiler.
++    : > sub/conftest.c
++    for i in 1 2 3 4 5 6; do
++      echo '#include "conftst'$i'.h"' >> sub/conftest.c
++      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++      # Solaris 8's {/usr,}/bin/sh.
++      touch sub/conftst$i.h
++    done
++    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++    case $depmode in
++    nosideeffect)
++      # after this tag, mechanisms are not by side-effect, so they'll
++      # only be used when explicitly requested
++      if test "x$enable_dependency_tracking" = xyes; then
++	continue
++      else
++	break
++      fi
++      ;;
++    none) break ;;
++    esac
++    # We check with `-c' and `-o' for the sake of the "dashmstdout"
++    # mode.  It turns out that the SunPro C++ compiler does not properly
++    # handle `-M -o', and we need to detect this.
++    if depmode=$depmode \
++       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++         >/dev/null 2>conftest.err &&
++       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++      # icc doesn't choke on unknown options, it will just issue warnings
++      # or remarks (even with -Werror).  So we grep stderr for any message
++      # that says an option was ignored or not supported.
++      # When given -MP, icc 7.0 and 7.1 complain thusly:
++      #   icc: Command line warning: ignoring option '-M'; no argument required
++      # The diagnosis changed in icc 8.0:
++      #   icc: Command line remark: option '-MP' not supported
++      if (grep 'ignoring option' conftest.err ||
++          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++        am_cv_$1_dependencies_compiler_type=$depmode
++        break
++      fi
++    fi
++  done
+ 
+-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
+-[*-*-cygwin* | *-*-mingw*)
+-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+-  AC_CHECK_TOOL(AS, as, false)
+-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+-  ;;
++  cd ..
++  rm -rf conftest.dir
++else
++  am_cv_$1_dependencies_compiler_type=none
++fi
+ ])
+-esac
++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
++AM_CONDITIONAL([am__fastdep$1], [
++  test "x$enable_dependency_tracking" != xno \
++  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+ ])
+ 
+-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
+-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
+-
+-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
+-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
+ 
+-# AC_ENABLE_SHARED - implement the --enable-shared flag
+-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_SHARED, [dnl
+-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(shared,
+-changequote(<<, >>)dnl
+-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_shared=yes ;;
+-no) enable_shared=no ;;
+-*)
+-  enable_shared=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_shared=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
+-])
+-
+-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
+-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_SHARED(no)])
+-
+-# AC_ENABLE_STATIC - implement the --enable-static flag
+-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_STATIC, [dnl
+-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(static,
+-changequote(<<, >>)dnl
+-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_static=yes ;;
+-no) enable_static=no ;;
+-*)
+-  enable_static=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_static=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
+-])
+-
+-# AC_DISABLE_STATIC - set the default static flag to --disable-static
+-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_STATIC(no)])
+-
+-
+-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
+-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
+-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
+-#   `yes'.
+-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
+-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+-AC_ARG_ENABLE(fast-install,
+-changequote(<<, >>)dnl
+-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
+-changequote([, ])dnl
+-[p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_fast_install=yes ;;
+-no) enable_fast_install=no ;;
+-*)
+-  enable_fast_install=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_fast_install=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac],
+-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
++# AM_SET_DEPDIR
++# -------------
++# Choose a directory name for dependency files.
++# This macro is AC_REQUIREd in _AM_DEPENDENCIES
++AC_DEFUN([AM_SET_DEPDIR],
++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+ ])
+ 
+-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
+-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-AC_ENABLE_FAST_INSTALL(no)])
+ 
+-# AC_PROG_LD - find the path to the GNU or non-GNU linker
+-AC_DEFUN(AC_PROG_LD,
+-[AC_ARG_WITH(gnu-ld,
+-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
+-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+-AC_REQUIRE([AC_PROG_CC])dnl
+-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+-ac_prog=ld
+-if test "$ac_cv_prog_gcc" = yes; then
+-  # Check if gcc -print-prog-name=ld gives a path.
+-  AC_MSG_CHECKING([for ld used by GCC])
+-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+-  case "$ac_prog" in
+-    # Accept absolute paths.
+-changequote(,)dnl
+-    [\\/]* | [A-Za-z]:[\\/]*)
+-      re_direlt='/[^/][^/]*/\.\./'
+-changequote([,])dnl
+-      # Canonicalize the path of ld
+-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+-      done
+-      test -z "$LD" && LD="$ac_prog"
+-      ;;
+-  "")
+-    # If it fails, then pretend we aren't using GCC.
+-    ac_prog=ld
+-    ;;
+-  *)
+-    # If it is relative, then search for the first ld in PATH.
+-    with_gnu_ld=unknown
+-    ;;
+-  esac
+-elif test "$with_gnu_ld" = yes; then
+-  AC_MSG_CHECKING([for GNU ld])
+-else
+-  AC_MSG_CHECKING([for non-GNU ld])
+-fi
+-AC_CACHE_VAL(ac_cv_path_LD,
+-[if test -z "$LD"; then
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+-      ac_cv_path_LD="$ac_dir/$ac_prog"
+-      # Check to see if the program is GNU ld.  I'd rather use --version,
+-      # but apparently some GNU ld's only accept -v.
+-      # Break only if it was the GNU/non-GNU ld that we prefer.
+-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+-	test "$with_gnu_ld" != no && break
+-      else
+-	test "$with_gnu_ld" != yes && break
+-      fi
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-else
+-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
+-fi])
+-LD="$ac_cv_path_LD"
+-if test -n "$LD"; then
+-  AC_MSG_RESULT($LD)
+-else
+-  AC_MSG_RESULT(no)
++# AM_DEP_TRACK
++# ------------
++AC_DEFUN([AM_DEP_TRACK],
++[AC_ARG_ENABLE(dependency-tracking,
++[  --disable-dependency-tracking  speeds up one-time build
++  --enable-dependency-tracking   do not reject slow dependency extractors])
++if test "x$enable_dependency_tracking" != xno; then
++  am_depcomp="$ac_aux_dir/depcomp"
++  AMDEPBACKSLASH='\'
+ fi
+-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+-AC_PROG_LD_GNU
++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
++AC_SUBST([AMDEPBACKSLASH])
+ ])
+ 
+-AC_DEFUN(AC_PROG_LD_GNU,
+-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
+-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+-  ac_cv_prog_gnu_ld=yes
+-else
+-  ac_cv_prog_gnu_ld=no
+-fi])
+-])
++# Generate code to set up dependency tracking.              -*- Autoconf -*-
+ 
+-# AC_PROG_NM - find the path to a BSD-compatible name lister
+-AC_DEFUN(AC_PROG_NM,
+-[AC_MSG_CHECKING([for BSD-compatible nm])
+-AC_CACHE_VAL(ac_cv_path_NM,
+-[if test -n "$NM"; then
+-  # Let the user override the test.
+-  ac_cv_path_NM="$NM"
+-else
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+-      # Check to see if the nm accepts a BSD-compat flag.
+-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+-      #   nm: unknown option "B" ignored
+-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -B"
+-	break
+-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -p"
+-	break
+-      else
+-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+-	continue # so that we can try to find one that supports BSD flags
+-      fi
+-    fi
++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++#serial 3
++
++# _AM_OUTPUT_DEPENDENCY_COMMANDS
++# ------------------------------
++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
++[for mf in $CONFIG_FILES; do
++  # Strip MF so we end up with the name of the file.
++  mf=`echo "$mf" | sed -e 's/:.*$//'`
++  # Check whether this is an Automake generated Makefile or not.
++  # We used to match only the files named `Makefile.in', but
++  # some people rename them; so instead we look at the file content.
++  # Grep'ing the first line is not enough: some people post-process
++  # each Makefile.in and add a new line on top of each file to say so.
++  # So let's grep whole file.
++  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
++    dirpart=`AS_DIRNAME("$mf")`
++  else
++    continue
++  fi
++  # Extract the definition of DEPDIR, am__include, and am__quote
++  # from the Makefile without running `make'.
++  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++  test -z "$DEPDIR" && continue
++  am__include=`sed -n 's/^am__include = //p' < "$mf"`
++  test -z "am__include" && continue
++  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
++  # When using ansi2knr, U may be empty or an underscore; expand it
++  U=`sed -n 's/^U = //p' < "$mf"`
++  # Find all dependency output files, they are included files with
++  # $(DEPDIR) in their names.  We invoke sed twice because it is the
++  # simplest approach to changing $(DEPDIR) to its actual value in the
++  # expansion.
++  for file in `sed -n "
++    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
++       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++    # Make sure the directory exists.
++    test -f "$dirpart/$file" && continue
++    fdir=`AS_DIRNAME(["$file"])`
++    AS_MKDIR_P([$dirpart/$fdir])
++    # echo "creating $dirpart/$file"
++    echo '# dummy' > "$dirpart/$file"
+   done
+-  IFS="$ac_save_ifs"
+-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+-fi])
+-NM="$ac_cv_path_NM"
+-AC_MSG_RESULT([$NM])
+-])
++done
++])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+ 
+-# AC_CHECK_LIBM - check for math library
+-AC_DEFUN(AC_CHECK_LIBM,
+-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+-LIBM=
+-case "$lt_target" in
+-*-*-beos* | *-*-cygwin*)
+-  # These system don't have libm
+-  ;;
+-*-ncr-sysv4.3*)
+-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
+-  ;;
+-*)
+-  AC_CHECK_LIB(m, main, LIBM="-lm")
+-  ;;
+-esac
+-])
+ 
+-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl convenience library and INCLTDL to the include flags for
+-# the libltdl header and adds --enable-ltdl-convenience to the
+-# configure arguments.  Note that LIBLTDL and INCLTDL are not
+-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
+-# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
+-# with '${top_builddir}/' and INCLTDL will be prefixed with
+-# '${top_srcdir}/' (note the single quotes!).  If your package is not
+-# flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
+-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-  case "$enable_ltdl_convenience" in
+-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+-  "") enable_ltdl_convenience=yes
+-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+-  esac
+-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+-  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++# AM_OUTPUT_DEPENDENCY_COMMANDS
++# -----------------------------
++# This macro should only be invoked once -- use via AC_REQUIRE.
++#
++# This code is only required when automatic dependency tracking
++# is enabled.  FIXME.  This creates each `.P' file that we will
++# need in order to bootstrap the dependency handling code.
++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
++[AC_CONFIG_COMMANDS([depfiles],
++     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
++     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+ ])
+ 
+-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl installable library and INCLTDL to the include flags for
+-# the libltdl header and adds --enable-ltdl-install to the configure
+-# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
+-# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
+-# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
+-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
+-# with '${top_srcdir}/' (note the single quotes!).  If your package is
+-# not flat and you're not using automake, define top_builddir and
+-# top_srcdir appropriately in the Makefiles.
+-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+-  AC_CHECK_LIB(ltdl, main,
+-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+-  [if test x"$enable_ltdl_install" = xno; then
+-     AC_MSG_WARN([libltdl not installed, but installation disabled])
+-   else
+-     enable_ltdl_install=yes
+-   fi
+-  ])
+-  if test x"$enable_ltdl_install" = x"yes"; then
+-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
+-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+-    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++# Do all the work for Automake.                             -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 12
++
++# This macro actually does too much.  Some checks are only needed if
++# your package does certain things.  But this isn't really a big deal.
++
++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
++# AM_INIT_AUTOMAKE([OPTIONS])
++# -----------------------------------------------
++# The call with PACKAGE and VERSION arguments is the old style
++# call (pre autoconf-2.50), which is being phased out.  PACKAGE
++# and VERSION should now be passed to AC_INIT and removed from
++# the call to AM_INIT_AUTOMAKE.
++# We support both call styles for the transition.  After
++# the next Automake release, Autoconf can make the AC_INIT
++# arguments mandatory, and then we can depend on a new Autoconf
++# release and drop the old call support.
++AC_DEFUN([AM_INIT_AUTOMAKE],
++[AC_PREREQ([2.58])dnl
++dnl Autoconf wants to disallow AM_ names.  We explicitly allow
++dnl the ones we care about.
++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])dnl
++# test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++   test -f $srcdir/config.status; then
++  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++fi
++
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++  if (cygpath --version) >/dev/null 2>/dev/null; then
++    CYGPATH_W='cygpath -w'
+   else
+-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+-    LIBLTDL="-lltdl"
+-    INCLTDL=
++    CYGPATH_W=echo
+   fi
++fi
++AC_SUBST([CYGPATH_W])
++
++# Define the identity of the package.
++dnl Distinguish between old-style and new-style calls.
++m4_ifval([$2],
++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
++ AC_SUBST([PACKAGE], [$1])dnl
++ AC_SUBST([VERSION], [$2])],
++[_AM_SET_OPTIONS([$1])dnl
++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
++
++_AM_IF_OPTION([no-define],,
++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
++
++# Some tools Automake needs.
++AC_REQUIRE([AM_SANITY_CHECK])dnl
++AC_REQUIRE([AC_ARG_PROGRAM])dnl
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
++AM_MISSING_PROG(AUTOCONF, autoconf)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
++AM_MISSING_PROG(AUTOHEADER, autoheader)
++AM_MISSING_PROG(MAKEINFO, makeinfo)
++AM_PROG_INSTALL_SH
++AM_PROG_INSTALL_STRIP
++AC_REQUIRE([AM_PROG_MKDIR_P])dnl
++# We need awk for the "check" target.  The system "awk" is bad on
++# some platforms.
++AC_REQUIRE([AC_PROG_AWK])dnl
++AC_REQUIRE([AC_PROG_MAKE_SET])dnl
++AC_REQUIRE([AM_SET_LEADING_DOT])dnl
++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
++              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
++	      		     [_AM_PROG_TAR([v7])])])
++_AM_IF_OPTION([no-dependencies],,
++[AC_PROVIDE_IFELSE([AC_PROG_CC],
++                  [_AM_DEPENDENCIES(CC)],
++                  [define([AC_PROG_CC],
++                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
++AC_PROVIDE_IFELSE([AC_PROG_CXX],
++                  [_AM_DEPENDENCIES(CXX)],
++                  [define([AC_PROG_CXX],
++                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+ ])
++])
++
++
++# When config.status generates a header, we must update the stamp-h file.
++# This file resides in the same directory as the config header
++# that is generated.  The stamp files are numbered to have different names.
++
++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
++# loop where config.status creates the headers, so we can generate
++# our stamp files there.
++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
++[# Compute $1's index in $config_headers.
++_am_stamp_count=1
++for _am_header in $config_headers :; do
++  case $_am_header in
++    $1 | $1:* )
++      break ;;
++    * )
++      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
++  esac
++done
++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+ 
+-dnl old names
+-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
+-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
+-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
+-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
+-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
+-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
+-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
++# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_SH
++# ------------------
++# Define $install_sh.
++AC_DEFUN([AM_PROG_INSTALL_SH],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++AC_SUBST(install_sh)])
++
++# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# Check whether the underlying file-system supports filenames
++# with a leading dot.  For instance MS-DOS doesn't.
++AC_DEFUN([AM_SET_LEADING_DOT],
++[rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++  am__leading_dot=.
++else
++  am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++AC_SUBST([am__leading_dot])])
+ 
+-dnl This is just to silence aclocal about the macro not being used
+-ifelse([AC_DISABLE_FAST_INSTALL])dnl
++# Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
++# From Jim Meyering
+ 
+-# Do all the work for Automake.  This macro actually does too much --
+-# some checks are only needed if your package does certain things.
+-# But this isn't really a big deal.
++# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++AC_DEFUN([AM_MAINTAINER_MODE],
++[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
++  dnl maintainer-mode is disabled by default
++  AC_ARG_ENABLE(maintainer-mode,
++[  --enable-maintainer-mode  enable make rules and dependencies not useful
++			  (and sometimes confusing) to the casual installer],
++      USE_MAINTAINER_MODE=$enableval,
++      USE_MAINTAINER_MODE=no)
++  AC_MSG_RESULT([$USE_MAINTAINER_MODE])
++  AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
++  MAINT=$MAINTAINER_MODE_TRUE
++  AC_SUBST(MAINT)dnl
++]
++)
+ 
+-# serial 1
++AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+ 
+-dnl Usage:
+-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
++# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+ 
+-AC_DEFUN([AM_INIT_AUTOMAKE],
+-[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+-AC_REQUIRE([AC_PROG_INSTALL])
+-PACKAGE=[$1]
+-AC_SUBST(PACKAGE)
+-VERSION=[$2]
+-AC_SUBST(VERSION)
+-dnl test to see if srcdir already configured
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
++# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 3
++
++# AM_MAKE_INCLUDE()
++# -----------------
++# Check to see how make treats includes.
++AC_DEFUN([AM_MAKE_INCLUDE],
++[am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++	@echo done
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++AC_MSG_CHECKING([for style of include used by $am_make])
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
++   am__include=include
++   am__quote=
++   _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++   echo '.include "confinc"' > confmf
++   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++      am__include=.include
++      am__quote="\""
++      _am_result=BSD
++   fi
+ fi
+-ifelse([$3],,
+-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+-AC_REQUIRE([AM_SANITY_CHECK])
+-AC_REQUIRE([AC_ARG_PROGRAM])
+-dnl FIXME This is truly gross.
+-missing_dir=`cd $ac_aux_dir && pwd`
+-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
+-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
+-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+-AC_REQUIRE([AC_PROG_MAKE_SET])])
++AC_SUBST([am__include])
++AC_SUBST([am__quote])
++AC_MSG_RESULT([$_am_result])
++rm -f confinc confmf
++])
+ 
+-# Copyright 2002  Free Software Foundation, Inc.
++# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+ 
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2, or (at your option)
+-# any later version.
++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
+ 
+-# This program is distributed in the hope that it will be useful,
+-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+-# GNU General Public License for more details.
++# serial 4
+ 
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++# AM_MISSING_PROG(NAME, PROGRAM)
++# ------------------------------
++AC_DEFUN([AM_MISSING_PROG],
++[AC_REQUIRE([AM_MISSING_HAS_RUN])
++$1=${$1-"${am_missing_run}$2"}
++AC_SUBST($1)])
+ 
+-# AM_AUTOMAKE_VERSION(VERSION)
+-# ----------------------------
+-# Automake X.Y traces this macro to ensure aclocal.m4 has been
+-# generated from the m4 files accompanying Automake X.Y.
+-AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
+ 
+-# AM_SET_CURRENT_AUTOMAKE_VERSION
+-# -------------------------------
+-# Call AM_AUTOMAKE_VERSION so it can be traced.
+-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+-	 [AM_AUTOMAKE_VERSION([1.4-p6])])
++# AM_MISSING_HAS_RUN
++# ------------------
++# Define MISSING if not defined so far and test if it supports --run.
++# If it does, set am_missing_run to use it, otherwise, to nothing.
++AC_DEFUN([AM_MISSING_HAS_RUN],
++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++  am_missing_run="$MISSING --run "
++else
++  am_missing_run=
++  AC_MSG_WARN([`missing' script is too old or missing])
++fi
++])
+ 
++# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
+ #
+-# Check to make sure that the build environment is sane.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_MKDIR_P
++# ---------------
++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+ #
++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
++# created by `make install' are always world readable, even if the
++# installer happens to have an overly restrictive umask (e.g. 077).
++# This was a mistake.  There are at least two reasons why we must not
++# use `-m 0755':
++#   - it causes special bits like SGID to be ignored,
++#   - it may be too restrictive (some setups expect 775 directories).
++#
++# Do not use -m 0755 and let people choose whatever they expect by
++# setting umask.
++#
++# We cannot accept any implementation of `mkdir' that recognizes `-p'.
++# Some implementations (such as Solaris 8's) are not thread-safe: if a
++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
++# concurrently, both version can detect that a/ is missing, but only
++# one can create it and the other will error out.  Consequently we
++# restrict ourselves to GNU make (using the --version option ensures
++# this.)
++AC_DEFUN([AM_PROG_MKDIR_P],
++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
++  # We used to keeping the `.' as first argument, in order to
++  # allow $(mkdir_p) to be used without argument.  As in
++  #   $(mkdir_p) $(somedir)
++  # where $(somedir) is conditionally defined.  However this is wrong
++  # for two reasons:
++  #  1. if the package is installed by a user who cannot write `.'
++  #     make install will fail,
++  #  2. the above comment should most certainly read
++  #     $(mkdir_p) $(DESTDIR)$(somedir)
++  #     so it does not work when $(somedir) is undefined and
++  #     $(DESTDIR) is not.
++  #  To support the latter case, we have to write
++  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
++  #  so the `.' trick is pointless.
++  mkdir_p='mkdir -p --'
++else
++  # On NextStep and OpenStep, the `mkdir' command does not
++  # recognize any option.  It will interpret all options as
++  # directories to create, and then abort because `.' already
++  # exists.
++  for d in ./-p ./--version;
++  do
++    test -d $d && rmdir $d
++  done
++  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
++  if test -f "$ac_aux_dir/mkinstalldirs"; then
++    mkdir_p='$(mkinstalldirs)'
++  else
++    mkdir_p='$(install_sh) -d'
++  fi
++fi
++AC_SUBST([mkdir_p])])
++
++# Helper functions for option handling.                     -*- Autoconf -*-
+ 
++# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 3
++
++# _AM_MANGLE_OPTION(NAME)
++# -----------------------
++AC_DEFUN([_AM_MANGLE_OPTION],
++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
++
++# _AM_SET_OPTION(NAME)
++# ------------------------------
++# Set option NAME.  Presently that only means defining a flag for this option.
++AC_DEFUN([_AM_SET_OPTION],
++[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
++
++# _AM_SET_OPTIONS(OPTIONS)
++# ----------------------------------
++# OPTIONS is a space-separated list of Automake options.
++AC_DEFUN([_AM_SET_OPTIONS],
++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
++
++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
++# -------------------------------------------
++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
++AC_DEFUN([_AM_IF_OPTION],
++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
++
++# Check to make sure that the build environment is sane.    -*- Autoconf -*-
++
++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
++# Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 4
++
++# AM_SANITY_CHECK
++# ---------------
+ AC_DEFUN([AM_SANITY_CHECK],
+ [AC_MSG_CHECKING([whether build environment is sane])
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments.  Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+-   if test "[$]*" = "X"; then
++   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
++   if test "$[*]" = "X"; then
+       # -L didn't work.
+-      set X `ls -t $srcdir/configure conftestfile`
++      set X `ls -t $srcdir/configure conftest.file`
+    fi
+-   if test "[$]*" != "X $srcdir/configure conftestfile" \
+-      && test "[$]*" != "X conftestfile $srcdir/configure"; then
++   rm -f conftest.file
++   if test "$[*]" != "X $srcdir/configure conftest.file" \
++      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+ 
+       # If neither matched, then we have a broken ls.  This can happen
+       # if, for instance, CONFIG_SHELL is bash and it inherits a
+@@ -685,7 +7328,7 @@ if (
+ alias in your environment])
+    fi
+ 
+-   test "[$]2" = conftestfile
++   test "$[2]" = conftest.file
+    )
+ then
+    # Ok.
+@@ -694,22 +7337,129 @@ else
+    AC_MSG_ERROR([newly created file is older than distributed files!
+ Check your system clock])
+ fi
+-rm -f conftest*
+ AC_MSG_RESULT(yes)])
+ 
+-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+-dnl The program must properly implement --version.
+-AC_DEFUN([AM_MISSING_PROG],
+-[AC_MSG_CHECKING(for working $2)
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf.  Sigh.
+-if ($2 --version) < /dev/null > /dev/null 2>&1; then
+-   $1=$2
+-   AC_MSG_RESULT(found)
+-else
+-   $1="$3/missing $2"
+-   AC_MSG_RESULT(missing)
++# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# AM_PROG_INSTALL_STRIP
++# ---------------------
++# One issue with vendor `install' (even GNU) is that you can't
++# specify the program used to strip binaries.  This is especially
++# annoying in cross-compiling environments, where the build's strip
++# is unlikely to handle the host's binaries.
++# Fortunately install-sh will honor a STRIPPROG variable, so we
++# always use install-sh in `make install-strip', and initialize
++# STRIPPROG with the value of the STRIP variable (set by the user).
++AC_DEFUN([AM_PROG_INSTALL_STRIP],
++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'.  However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
++if test "$cross_compiling" != no; then
++  AC_CHECK_TOOL([STRIP], [strip], :)
+ fi
+-AC_SUBST($1)])
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
++AC_SUBST([INSTALL_STRIP_PROGRAM])])
++
++# Check how to create a tarball.                            -*- Autoconf -*-
++
++# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
++#
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# serial 2
++
++# _AM_PROG_TAR(FORMAT)
++# --------------------
++# Check how to create a tarball in format FORMAT.
++# FORMAT should be one of `v7', `ustar', or `pax'.
++#
++# Substitute a variable $(am__tar) that is a command
++# writing to stdout a FORMAT-tarball containing the directory
++# $tardir.
++#     tardir=directory && $(am__tar) > result.tar
++#
++# Substitute a variable $(am__untar) that extract such
++# a tarball read from stdin.
++#     $(am__untar) < result.tar
++AC_DEFUN([_AM_PROG_TAR],
++[# Always define AMTAR for backward compatibility.
++AM_MISSING_PROG([AMTAR], [tar])
++m4_if([$1], [v7],
++     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
++     [m4_case([$1], [ustar],, [pax],,
++              [m4_fatal([Unknown tar format])])
++AC_MSG_CHECKING([how to create a $1 tar archive])
++# Loop over all known methods to create a tar archive until one works.
++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
++_am_tools=${am_cv_prog_tar_$1-$_am_tools}
++# Do not fold the above two line into one, because Tru64 sh and
++# Solaris sh will not grok spaces in the rhs of `-'.
++for _am_tool in $_am_tools
++do
++  case $_am_tool in
++  gnutar)
++    for _am_tar in tar gnutar gtar;
++    do
++      AM_RUN_LOG([$_am_tar --version]) && break
++    done
++    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
++    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
++    am__untar="$_am_tar -xf -"
++    ;;
++  plaintar)
++    # Must skip GNU tar: if it does not support --format= it doesn't create
++    # ustar tarball either.
++    (tar --version) >/dev/null 2>&1 && continue
++    am__tar='tar chf - "$$tardir"'
++    am__tar_='tar chf - "$tardir"'
++    am__untar='tar xf -'
++    ;;
++  pax)
++    am__tar='pax -L -x $1 -w "$$tardir"'
++    am__tar_='pax -L -x $1 -w "$tardir"'
++    am__untar='pax -r'
++    ;;
++  cpio)
++    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
++    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
++    am__untar='cpio -i -H $1 -d'
++    ;;
++  none)
++    am__tar=false
++    am__tar_=false
++    am__untar=false
++    ;;
++  esac
++
++  # If the value was cached, stop now.  We just wanted to have am__tar
++  # and am__untar set.
++  test -n "${am_cv_prog_tar_$1}" && break
++
++  # tar/untar a dummy directory, and stop if the command works
++  rm -rf conftest.dir
++  mkdir conftest.dir
++  echo GrepMe > conftest.dir/file
++  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
++  rm -rf conftest.dir
++  if test -s conftest.tar; then
++    AM_RUN_LOG([$am__untar <conftest.tar])
++    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
++  fi
++done
++rm -rf conftest.dir
++
++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
++AC_MSG_RESULT([$am_cv_prog_tar_$1])])
++AC_SUBST([am__tar])
++AC_SUBST([am__untar])
++]) # _AM_PROG_TAR
+ 
+diff -puriN SDL_gfx-2.0.13.old/config.guess SDL_gfx-2.0.13/config.guess
+--- SDL_gfx-2.0.13.old/config.guess	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/config.guess	2006-02-25 16:29:12.000000000 +0100
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+-#   Free Software Foundation, Inc.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 
+-timestamp='2001-01-17'
++timestamp='2006-02-23'
+ 
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -17,15 +17,18 @@ timestamp='2001-01-17'
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+ 
+-# Written by Per Bothner <bothner@cygnus.com>.
+-# Please send patches to <config-patches@gnu.org>.
++
++# Originally written by Per Bothner <per@bothner.com>.
++# Please send patches to <config-patches@gnu.org>.  Submit a context
++# diff and a properly formatted ChangeLog entry.
+ #
+ # This script attempts to guess a canonical system name similar to
+ # config.sub.  If it succeeds, it prints the system name on stdout, and
+@@ -33,10 +36,6 @@ timestamp='2001-01-17'
+ #
+ # The plan is that this can be called by configure scripts if you
+ # don't specify an explicit build system type.
+-#
+-# Only a few systems have been added to this list; please add others
+-# (but try to keep the structure clean).
+-#
+ 
+ me=`echo "$0" | sed -e 's,.*/,,'`
+ 
+@@ -56,7 +55,7 @@ version="\
+ GNU config.guess ($timestamp)
+ 
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+ 
+ This is free software; see the source for copying conditions.  There is NO
+@@ -69,11 +68,11 @@ Try \`$me --help' for more information."
+ while test $# -gt 0 ; do
+   case $1 in
+     --time-stamp | --time* | -t )
+-       echo "$timestamp" ; exit 0 ;;
++       echo "$timestamp" ; exit ;;
+     --version | -v )
+-       echo "$version" ; exit 0 ;;
++       echo "$version" ; exit ;;
+     --help | --h* | -h )
+-       echo "$usage"; exit 0 ;;
++       echo "$usage"; exit ;;
+     -- )     # Stop option processing
+        shift; break ;;
+     - )	# Use stdin as input.
+@@ -91,33 +90,45 @@ if test $# != 0; then
+   exit 1
+ fi
+ 
++trap 'exit 1' 1 2 15
+ 
+-dummy=dummy-$$
+-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
+ 
+-# CC_FOR_BUILD -- compiler used by this script.
+ # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+ # use `HOST_CC' if defined, but it is deprecated.
+ 
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+ case $CC_FOR_BUILD,$HOST_CC,$CC in
+- ,,)    echo "int dummy(){}" > $dummy.c
+-	for c in cc gcc c89 ; do
+-	  ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+-	  if test $? = 0 ; then
+-	     CC_FOR_BUILD="$c"; break
+-	  fi
+-	done
+-	rm -f $dummy.c $dummy.o $dummy.rel
++ ,,)    echo "int x;" > $dummy.c ;
++	for c in cc gcc c89 c99 ; do
++	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++	     CC_FOR_BUILD="$c"; break ;
++	  fi ;
++	done ;
+ 	if test x"$CC_FOR_BUILD" = x ; then
+-	  CC_FOR_BUILD=no_compiler_found
++	  CC_FOR_BUILD=no_compiler_found ;
+ 	fi
+ 	;;
+  ,,*)   CC_FOR_BUILD=$CC ;;
+  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+-esac
++esac ; set_cc_for_build= ;'
+ 
+ # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+-# (ghazi@noc.rutgers.edu 8/24/94.)
++# (ghazi@noc.rutgers.edu 1994-08-24)
+ if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ 	PATH=$PATH:/.attbin ; export PATH
+ fi
+@@ -138,22 +149,24 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
+ 	# object file format.  This provides both forward
+ 	# compatibility and a consistent mechanism for selecting the
+ 	# object file format.
+-	# Determine the machine/vendor (is the vendor relevant).
+-	case "${UNAME_MACHINE}" in
+-	    amiga) machine=m68k-unknown ;;
+-	    arm32) machine=arm-unknown ;;
+-	    atari*) machine=m68k-atari ;;
+-	    sun3*) machine=m68k-sun ;;
+-	    mac68k) machine=m68k-apple ;;
+-	    macppc) machine=powerpc-apple ;;
+-	    hp3[0-9][05]) machine=m68k-hp ;;
+-	    ibmrt|romp-ibm) machine=romp-ibm ;;
+-	    *) machine=${UNAME_MACHINE}-unknown ;;
++	#
++	# Note: NetBSD doesn't particularly care about the vendor
++	# portion of the name.  We always set it to "unknown".
++	sysctl="sysctl -n hw.machine_arch"
++	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++	case "${UNAME_MACHINE_ARCH}" in
++	    armeb) machine=armeb-unknown ;;
++	    arm*) machine=arm-unknown ;;
++	    sh3el) machine=shl-unknown ;;
++	    sh3eb) machine=sh-unknown ;;
++	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ 	esac
+ 	# The Operating System including object format, if it has switched
+ 	# to ELF recently, or will in the future.
+-	case "${UNAME_MACHINE}" in
+-	    i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
++	case "${UNAME_MACHINE_ARCH}" in
++	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++		eval $set_cc_for_build
+ 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ 			| grep __ELF__ >/dev/null
+ 		then
+@@ -169,116 +182,128 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$
+ 		;;
+ 	esac
+ 	# The OS release
+-	release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++	# Debian GNU/NetBSD machines have a different userland, and
++	# thus, need a distinct triplet. However, they do not need
++	# kernel version information, so it can be replaced with a
++	# suitable tag, in the style of linux-gnu.
++	case "${UNAME_VERSION}" in
++	    Debian*)
++		release='-gnu'
++		;;
++	    *)
++		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++		;;
++	esac
+ 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ 	# contains redundant information, the shorter form:
+ 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ 	echo "${machine}-${os}${release}"
+-	exit 0 ;;
++	exit ;;
++    *:OpenBSD:*:*)
++	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++	exit ;;
++    *:ekkoBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++	exit ;;
++    *:SolidBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
++	exit ;;
++    macppc:MirBSD:*:*)
++	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
++	exit ;;
++    *:MirBSD:*:*)
++	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++	exit ;;
+     alpha:OSF1:*:*)
+-	if test $UNAME_RELEASE = "V4.0"; then
++	case $UNAME_RELEASE in
++	*4.0)
+ 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+-	fi
++		;;
++	*5.*)
++	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++		;;
++	esac
++	# According to Compaq, /usr/sbin/psrinfo has been available on
++	# OSF/1 and Tru64 systems produced since 1995.  I hope that
++	# covers most systems running today.  This code pipes the CPU
++	# types through head -n 1, so we only detect the type of CPU 0.
++	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++	case "$ALPHA_CPU_TYPE" in
++	    "EV4 (21064)")
++		UNAME_MACHINE="alpha" ;;
++	    "EV4.5 (21064)")
++		UNAME_MACHINE="alpha" ;;
++	    "LCA4 (21066/21068)")
++		UNAME_MACHINE="alpha" ;;
++	    "EV5 (21164)")
++		UNAME_MACHINE="alphaev5" ;;
++	    "EV5.6 (21164A)")
++		UNAME_MACHINE="alphaev56" ;;
++	    "EV5.6 (21164PC)")
++		UNAME_MACHINE="alphapca56" ;;
++	    "EV5.7 (21164PC)")
++		UNAME_MACHINE="alphapca57" ;;
++	    "EV6 (21264)")
++		UNAME_MACHINE="alphaev6" ;;
++	    "EV6.7 (21264A)")
++		UNAME_MACHINE="alphaev67" ;;
++	    "EV6.8CB (21264C)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.8AL (21264B)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.8CX (21264D)")
++		UNAME_MACHINE="alphaev68" ;;
++	    "EV6.9A (21264/EV69A)")
++		UNAME_MACHINE="alphaev69" ;;
++	    "EV7 (21364)")
++		UNAME_MACHINE="alphaev7" ;;
++	    "EV7.9 (21364A)")
++		UNAME_MACHINE="alphaev79" ;;
++	esac
++	# A Pn.n version is a patched version.
+ 	# A Vn.n version is a released version.
+ 	# A Tn.n version is a released field test version.
+ 	# A Xn.n version is an unreleased experimental baselevel.
+ 	# 1.2 uses "1.2" for uname -r.
+-	cat <<EOF >$dummy.s
+-	.data
+-\$Lformat:
+-	.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+-
+-	.text
+-	.globl main
+-	.align 4
+-	.ent main
+-main:
+-	.frame \$30,16,\$26,0
+-	ldgp \$29,0(\$27)
+-	.prologue 1
+-	.long 0x47e03d80 # implver \$0
+-	lda \$2,-1
+-	.long 0x47e20c21 # amask \$2,\$1
+-	lda \$16,\$Lformat
+-	mov \$0,\$17
+-	not \$1,\$18
+-	jsr \$26,printf
+-	ldgp \$29,0(\$26)
+-	mov 0,\$16
+-	jsr \$26,exit
+-	.end main
+-EOF
+-	$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+-	if test "$?" = 0 ; then
+-		case `./$dummy` in
+-			0-0)
+-				UNAME_MACHINE="alpha"
+-				;;
+-			1-0)
+-				UNAME_MACHINE="alphaev5"
+-				;;
+-			1-1)
+-				UNAME_MACHINE="alphaev56"
+-				;;
+-			1-101)
+-				UNAME_MACHINE="alphapca56"
+-				;;
+-			2-303)
+-				UNAME_MACHINE="alphaev6"
+-				;;
+-			2-307)
+-				UNAME_MACHINE="alphaev67"
+-				;;
+-		esac
+-	fi
+-	rm -f $dummy.s $dummy
+-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+-	exit 0 ;;
++	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++	exit ;;
+     Alpha\ *:Windows_NT*:*)
+ 	# How do we know it's Interix rather than the generic POSIX subsystem?
+ 	# Should we change UNAME_MACHINE based on the output of uname instead
+ 	# of the specific Alpha model?
+ 	echo alpha-pc-interix
+-	exit 0 ;;
++	exit ;;
+     21064:Windows_NT:50:3)
+ 	echo alpha-dec-winnt3.5
+-	exit 0 ;;
++	exit ;;
+     Amiga*:UNIX_System_V:4.0:*)
+ 	echo m68k-unknown-sysv4
+-	exit 0;;
+-    amiga:OpenBSD:*:*)
+-	echo m68k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:[Aa]miga[Oo][Ss]:*:*)
+ 	echo ${UNAME_MACHINE}-unknown-amigaos
+-	exit 0 ;;
+-    arc64:OpenBSD:*:*)
+-	echo mips64el-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    arc:OpenBSD:*:*)
+-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    hkmips:OpenBSD:*:*)
+-	echo mips-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    pmax:OpenBSD:*:*)
+-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    sgi:OpenBSD:*:*)
+-	echo mips-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    wgrisc:OpenBSD:*:*)
+-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
++    *:[Mm]orph[Oo][Ss]:*:*)
++	echo ${UNAME_MACHINE}-unknown-morphos
++	exit ;;
+     *:OS/390:*:*)
+ 	echo i370-ibm-openedition
+-	exit 0 ;;
++	exit ;;
++    *:z/VM:*:*)
++	echo s390-ibm-zvmoe
++	exit ;;
++    *:OS400:*:*)
++        echo powerpc-ibm-os400
++	exit ;;
+     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ 	echo arm-acorn-riscix${UNAME_RELEASE}
+-	exit 0;;
++	exit ;;
++    arm:riscos:*:*|arm:RISCOS:*:*)
++	echo arm-unknown-riscos
++	exit ;;
+     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ 	echo hppa1.1-hitachi-hiuxmpp
+-	exit 0;;
++	exit ;;
+     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+@@ -286,25 +311,32 @@ EOF
+ 	else
+ 		echo pyramid-pyramid-bsd
+ 	fi
+-	exit 0 ;;
++	exit ;;
+     NILE*:*:*:dcosx)
+ 	echo pyramid-pyramid-svr4
+-	exit 0 ;;
++	exit ;;
++    DRS?6000:unix:4.0:6*)
++	echo sparc-icl-nx6
++	exit ;;
++    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++	case `/usr/bin/uname -p` in
++	    sparc) echo sparc-icl-nx7; exit ;;
++	esac ;;
+     sun4H:SunOS:5.*:*)
+ 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+-	exit 0 ;;
++	exit ;;
+     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+-	exit 0 ;;
++	exit ;;
+     i86pc:SunOS:5.*:*)
+ 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+-	exit 0 ;;
++	exit ;;
+     sun4*:SunOS:6*:*)
+ 	# According to config.sub, this is the proper way to canonicalize
+ 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+ 	# it's likely to be more like Solaris than SunOS4.
+ 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+-	exit 0 ;;
++	exit ;;
+     sun4*:SunOS:*:*)
+ 	case "`/usr/bin/arch -k`" in
+ 	    Series*|S4*)
+@@ -313,12 +345,12 @@ EOF
+ 	esac
+ 	# Japanese Language versions have a version number like `4.1.3-JL'.
+ 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+-	exit 0 ;;
++	exit ;;
+     sun3*:SunOS:*:*)
+ 	echo m68k-sun-sunos${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     sun*:*:4.2BSD:*)
+-	UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ 	case "`/bin/arch`" in
+ 	    sun3)
+@@ -328,13 +360,10 @@ EOF
+ 		echo sparc-sun-sunos${UNAME_RELEASE}
+ 		;;
+ 	esac
+-	exit 0 ;;
++	exit ;;
+     aushp:SunOS:*:*)
+ 	echo sparc-auspex-sunos${UNAME_RELEASE}
+-	exit 0 ;;
+-    atari*:OpenBSD:*:*)
+-	echo m68k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     # The situation for MiNT is a little confusing.  The machine name
+     # can be virtually everything (everything which is not
+     # "atarist" or "atariste" at least should have a processor
+@@ -345,50 +374,42 @@ EOF
+     # be no problem.
+     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+         echo m68k-atari-mint${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ 	echo m68k-atari-mint${UNAME_RELEASE}
+-        exit 0 ;;
++        exit ;;
+     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+         echo m68k-atari-mint${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+         echo m68k-milan-mint${UNAME_RELEASE}
+-        exit 0 ;;
++        exit ;;
+     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+         echo m68k-hades-mint${UNAME_RELEASE}
+-        exit 0 ;;
++        exit ;;
+     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+         echo m68k-unknown-mint${UNAME_RELEASE}
+-        exit 0 ;;
+-    sun3*:OpenBSD:*:*)
+-	echo m68k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    mac68k:OpenBSD:*:*)
+-	echo m68k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    mvme68k:OpenBSD:*:*)
+-	echo m68k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    mvme88k:OpenBSD:*:*)
+-	echo m88k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
++        exit ;;
++    m68k:machten:*:*)
++	echo m68k-apple-machten${UNAME_RELEASE}
++	exit ;;
+     powerpc:machten:*:*)
+ 	echo powerpc-apple-machten${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     RISC*:Mach:*:*)
+ 	echo mips-dec-mach_bsd4.3
+-	exit 0 ;;
++	exit ;;
+     RISC*:ULTRIX:*:*)
+ 	echo mips-dec-ultrix${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     VAX*:ULTRIX*:*:*)
+ 	echo vax-dec-ultrix${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     2020:CLIX:*:* | 2430:CLIX:*:*)
+ 	echo clipper-intergraph-clix${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     mips:*:*:UMIPS | mips:*:*:RISCos)
++	eval $set_cc_for_build
+ 	sed 's/^	//' << EOF >$dummy.c
+ #ifdef __cplusplus
+ #include <stdio.h>  /* for printf() prototype */
+@@ -410,24 +431,33 @@ EOF
+ 	  exit (-1);
+ 	}
+ EOF
+-	$CC_FOR_BUILD $dummy.c -o $dummy \
+-	  && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+-	  && rm $dummy.c $dummy && exit 0
+-	rm -f $dummy.c $dummy
++	$CC_FOR_BUILD -o $dummy $dummy.c &&
++	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++	  SYSTEM_NAME=`$dummy $dummyarg` &&
++	    { echo "$SYSTEM_NAME"; exit; }
+ 	echo mips-mips-riscos${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
++    Motorola:PowerMAX_OS:*:*)
++	echo powerpc-motorola-powermax
++	exit ;;
++    Motorola:*:4.3:PL8-*)
++	echo powerpc-harris-powermax
++	exit ;;
++    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++	echo powerpc-harris-powermax
++	exit ;;
+     Night_Hawk:Power_UNIX:*:*)
+ 	echo powerpc-harris-powerunix
+-	exit 0 ;;
++	exit ;;
+     m88k:CX/UX:7*:*)
+ 	echo m88k-harris-cxux7
+-	exit 0 ;;
++	exit ;;
+     m88k:*:4*:R4*)
+ 	echo m88k-motorola-sysv4
+-	exit 0 ;;
++	exit ;;
+     m88k:*:3*:R3*)
+ 	echo m88k-motorola-sysv3
+-	exit 0 ;;
++	exit ;;
+     AViiON:dgux:*:*)
+         # DG/UX returns AViiON for all architectures
+         UNAME_PROCESSOR=`/usr/bin/uname -p`
+@@ -443,31 +473,40 @@ EOF
+ 	else
+ 	    echo i586-dg-dgux${UNAME_RELEASE}
+ 	fi
+- 	exit 0 ;;
++ 	exit ;;
+     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+ 	echo m88k-dolphin-sysv3
+-	exit 0 ;;
++	exit ;;
+     M88*:*:R3*:*)
+ 	# Delta 88k system running SVR3
+ 	echo m88k-motorola-sysv3
+-	exit 0 ;;
++	exit ;;
+     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ 	echo m88k-tektronix-sysv3
+-	exit 0 ;;
++	exit ;;
+     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ 	echo m68k-tektronix-bsd
+-	exit 0 ;;
++	exit ;;
+     *:IRIX*:*:*)
+ 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+-	exit 0 ;;
++	exit ;;
+     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
+-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+-    i?86:AIX:*:*)
++	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
++	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
++    i*86:AIX:*:*)
+ 	echo i386-ibm-aix
+-	exit 0 ;;
++	exit ;;
++    ia64:AIX:*:*)
++	if [ -x /usr/bin/oslevel ] ; then
++		IBM_REV=`/usr/bin/oslevel`
++	else
++		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++	fi
++	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++	exit ;;
+     *:AIX:2:3)
+ 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++		eval $set_cc_for_build
+ 		sed 's/^		//' << EOF >$dummy.c
+ 		#include <sys/systemcfg.h>
+ 
+@@ -479,18 +518,21 @@ EOF
+ 			exit(0);
+ 			}
+ EOF
+-		$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+-		rm -f $dummy.c $dummy
+-		echo rs6000-ibm-aix3.2.5
++		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++		then
++			echo "$SYSTEM_NAME"
++		else
++			echo rs6000-ibm-aix3.2.5
++		fi
+ 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ 		echo rs6000-ibm-aix3.2.4
+ 	else
+ 		echo rs6000-ibm-aix3.2
+ 	fi
+-	exit 0 ;;
+-    *:AIX:*:4)
+-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
+-	if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then
++	exit ;;
++    *:AIX:*:[45])
++	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ 		IBM_ARCH=rs6000
+ 	else
+ 		IBM_ARCH=powerpc
+@@ -498,54 +540,39 @@ EOF
+ 	if [ -x /usr/bin/oslevel ] ; then
+ 		IBM_REV=`/usr/bin/oslevel`
+ 	else
+-		IBM_REV=4.${UNAME_RELEASE}
++		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ 	fi
+ 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+-	exit 0 ;;
+-    *:AIX:*:5)
+-	case "`lsattr -El proc0 -a type -F value`" in
+-	    PowerPC*) IBM_ARCH=powerpc
+-		      IBM_MANUF=ibm ;;
+-	    Itanium)  IBM_ARCH=ia64
+-		      IBM_MANUF=unknown ;;
+-	    POWER*)   IBM_ARCH=power
+-		      IBM_MANUF=ibm ;;
+-	    *)        IBM_ARCH=powerpc
+-		      IBM_MANUF=ibm ;;
+-	esac
+-	echo ${IBM_ARCH}-${IBM_MANUF}-aix${UNAME_VERSION}.${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:AIX:*:*)
+ 	echo rs6000-ibm-aix
+-	exit 0 ;;
++	exit ;;
+     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ 	echo romp-ibm-bsd4.4
+-	exit 0 ;;
++	exit ;;
+     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+ 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+-	exit 0 ;;                           # report: romp-ibm BSD 4.3
++	exit ;;                             # report: romp-ibm BSD 4.3
+     *:BOSX:*:*)
+ 	echo rs6000-bull-bosx
+-	exit 0 ;;
++	exit ;;
+     DPX/2?00:B.O.S.:*:*)
+ 	echo m68k-bull-sysv3
+-	exit 0 ;;
++	exit ;;
+     9000/[34]??:4.3bsd:1.*:*)
+ 	echo m68k-hp-bsd
+-	exit 0 ;;
++	exit ;;
+     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ 	echo m68k-hp-bsd4.4
+-	exit 0 ;;
++	exit ;;
+     9000/[34678]??:HP-UX:*:*)
+ 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ 	case "${UNAME_MACHINE}" in
+ 	    9000/31? )            HP_ARCH=m68000 ;;
+ 	    9000/[34]?? )         HP_ARCH=m68k ;;
+ 	    9000/[678][0-9][0-9])
+-              case "${HPUX_REV}" in
+-                11.[0-9][0-9])
+-                  if [ -x /usr/bin/getconf ]; then
+-                    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++		if [ -x /usr/bin/getconf ]; then
++		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                     sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                     case "${sc_cpu_version}" in
+                       523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+@@ -554,12 +581,13 @@ EOF
+                         case "${sc_kernel_bits}" in
+                           32) HP_ARCH="hppa2.0n" ;;
+                           64) HP_ARCH="hppa2.0w" ;;
++			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                         esac ;;
+                     esac
+-                  fi ;;
+-              esac
+-              if [ "${HP_ARCH}" = "" ]; then
+-              sed 's/^              //' << EOF >$dummy.c
++		fi
++		if [ "${HP_ARCH}" = "" ]; then
++		    eval $set_cc_for_build
++		    sed 's/^              //' << EOF >$dummy.c
+ 
+               #define _HPUX_SOURCE
+               #include <stdlib.h>
+@@ -592,18 +620,39 @@ EOF
+                   exit (0);
+               }
+ EOF
+-	(CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+-	if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+-	rm -f $dummy.c $dummy
+-	fi ;;
++		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++		    test -z "$HP_ARCH" && HP_ARCH=hppa
++		fi ;;
+ 	esac
++	if [ ${HP_ARCH} = "hppa2.0w" ]
++	then
++	    eval $set_cc_for_build
++
++	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
++	    # generating 64-bit code.  GNU and HP use different nomenclature:
++	    #
++	    # $ CC_FOR_BUILD=cc ./config.guess
++	    # => hppa2.0w-hp-hpux11.23
++	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++	    # => hppa64-hp-hpux11.23
++
++	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++		grep __LP64__ >/dev/null
++	    then
++		HP_ARCH="hppa2.0w"
++	    else
++		HP_ARCH="hppa64"
++	    fi
++	fi
+ 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+-	exit 0 ;;
++	exit ;;
+     ia64:HP-UX:*:*)
+ 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ 	echo ia64-hp-hpux${HPUX_REV}
+-	exit 0 ;;
++	exit ;;
+     3050*:HI-UX:*:*)
++	eval $set_cc_for_build
+ 	sed 's/^	//' << EOF >$dummy.c
+ 	#include <unistd.h>
+ 	int
+@@ -629,480 +678,473 @@ EOF
+ 	  exit (0);
+ 	}
+ EOF
+-	$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
+-	rm -f $dummy.c $dummy
++	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++		{ echo "$SYSTEM_NAME"; exit; }
+ 	echo unknown-hitachi-hiuxwe2
+-	exit 0 ;;
++	exit ;;
+     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ 	echo hppa1.1-hp-bsd
+-	exit 0 ;;
++	exit ;;
+     9000/8??:4.3bsd:*:*)
+ 	echo hppa1.0-hp-bsd
+-	exit 0 ;;
+-    *9??*:MPE/iX:*:*)
++	exit ;;
++    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ 	echo hppa1.0-hp-mpeix
+-	exit 0 ;;
++	exit ;;
+     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ 	echo hppa1.1-hp-osf
+-	exit 0 ;;
++	exit ;;
+     hp8??:OSF1:*:*)
+ 	echo hppa1.0-hp-osf
+-	exit 0 ;;
+-    i?86:OSF1:*:*)
++	exit ;;
++    i*86:OSF1:*:*)
+ 	if [ -x /usr/sbin/sysversion ] ; then
+ 	    echo ${UNAME_MACHINE}-unknown-osf1mk
+ 	else
+ 	    echo ${UNAME_MACHINE}-unknown-osf1
+ 	fi
+-	exit 0 ;;
++	exit ;;
+     parisc*:Lites*:*:*)
+ 	echo hppa1.1-hp-lites
+-	exit 0 ;;
+-    hppa*:OpenBSD:*:*)
+-	echo hppa-unknown-openbsd
+-	exit 0 ;;
++	exit ;;
+     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ 	echo c1-convex-bsd
+-        exit 0 ;;
++        exit ;;
+     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ 	if getsysinfo -f scalar_acc
+ 	then echo c32-convex-bsd
+ 	else echo c2-convex-bsd
+ 	fi
+-        exit 0 ;;
++        exit ;;
+     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ 	echo c34-convex-bsd
+-        exit 0 ;;
++        exit ;;
+     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ 	echo c38-convex-bsd
+-        exit 0 ;;
++        exit ;;
+     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ 	echo c4-convex-bsd
+-        exit 0 ;;
+-    CRAY*X-MP:*:*:*)
+-	echo xmp-cray-unicos
+-        exit 0 ;;
++        exit ;;
+     CRAY*Y-MP:*:*:*)
+-	echo ymp-cray-unicos${UNAME_RELEASE}
+-	exit 0 ;;
++	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
+     CRAY*[A-Z]90:*:*:*)
+ 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+-	exit 0 ;;
++	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++	      -e 's/\.[^.]*$/.X/'
++	exit ;;
+     CRAY*TS:*:*:*)
+ 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+-	exit 0 ;;
+-    CRAY*T3D:*:*:*)
+-	echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+-	exit 0 ;;
++	exit ;;
+     CRAY*T3E:*:*:*)
+ 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+-	exit 0 ;;
++	exit ;;
+     CRAY*SV1:*:*:*)
+ 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+-	exit 0 ;;
+-    CRAY-2:*:*:*)
+-	echo cray2-cray-unicos
+-        exit 0 ;;
++	exit ;;
++    *:UNICOS/mp:*:*)
++	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++	exit ;;
+     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+-        exit 0 ;;
+-    hp300:OpenBSD:*:*)
+-	echo m68k-unknown-openbsd${UNAME_RELEASE}
+-	exit 0 ;;
+-    i?86:BSD/386:*:* | i?86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++        exit ;;
++    5000:UNIX_System_V:4.*:*)
++        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++	exit ;;
++    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     sparc*:BSD/OS:*:*)
+ 	echo sparc-unknown-bsdi${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:BSD/OS:*:*)
+ 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:FreeBSD:*:*)
+-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+-	exit 0 ;;
+-    *:OpenBSD:*:*)
+-	echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+-	exit 0 ;;
++	case ${UNAME_MACHINE} in
++	    pc98)
++		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++	    *)
++		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++	esac
++	exit ;;
+     i*:CYGWIN*:*)
+ 	echo ${UNAME_MACHINE}-pc-cygwin
+-	exit 0 ;;
++	exit ;;
+     i*:MINGW*:*)
+ 	echo ${UNAME_MACHINE}-pc-mingw32
+-	exit 0 ;;
++	exit ;;
++    i*:MSYS_NT-*:*:*)
++	echo ${UNAME_MACHINE}-pc-mingw32
++	exit ;;
++    i*:windows32*:*)
++    	# uname -m includes "-pc" on this system.
++    	echo ${UNAME_MACHINE}-mingw32
++	exit ;;
+     i*:PW*:*)
+ 	echo ${UNAME_MACHINE}-pc-pw32
+-	exit 0 ;;
++	exit ;;
++    x86:Interix*:[345]*)
++	echo i586-pc-interix${UNAME_RELEASE}
++	exit ;;
++    EM64T:Interix*:[345]*)
++	echo x86_64-unknown-interix${UNAME_RELEASE}
++	exit ;;
++    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++	echo i${UNAME_MACHINE}-pc-mks
++	exit ;;
+     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ 	# How do we know it's Interix rather than the generic POSIX subsystem?
+ 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ 	# UNAME_MACHINE based on the output of uname instead of i386?
+-	echo i386-pc-interix
+-	exit 0 ;;
++	echo i586-pc-interix
++	exit ;;
+     i*:UWIN*:*)
+ 	echo ${UNAME_MACHINE}-pc-uwin
+-	exit 0 ;;
++	exit ;;
++    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++	echo x86_64-unknown-cygwin
++	exit ;;
+     p*:CYGWIN*:*)
+ 	echo powerpcle-unknown-cygwin
+-	exit 0 ;;
++	exit ;;
+     prep*:SunOS:5.*:*)
+ 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+-	exit 0 ;;
++	exit ;;
+     *:GNU:*:*)
++	# the GNU system
+ 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+-	exit 0 ;;
++	exit ;;
++    *:GNU/*:*:*)
++	# other systems with GNU libc and userland
++	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++	exit ;;
+     i*86:Minix:*:*)
+ 	echo ${UNAME_MACHINE}-pc-minix
+-	exit 0 ;;
+-    *:Linux:*:*)
+-
++	exit ;;
++    arm*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    cris:Linux:*:*)
++	echo cris-axis-linux-gnu
++	exit ;;
++    crisv32:Linux:*:*)
++	echo crisv32-axis-linux-gnu
++	exit ;;
++    frv:Linux:*:*)
++    	echo frv-unknown-linux-gnu
++	exit ;;
++    ia64:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    m32r*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    m68*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    mips:Linux:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#undef CPU
++	#undef mips
++	#undef mipsel
++	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++	CPU=mipsel
++	#else
++	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++	CPU=mips
++	#else
++	CPU=
++	#endif
++	#endif
++EOF
++	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
++	    /^CPU/{
++		s: ::g
++		p
++	    }'`"
++	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++	;;
++    mips64:Linux:*:*)
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#undef CPU
++	#undef mips64
++	#undef mips64el
++	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++	CPU=mips64el
++	#else
++	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++	CPU=mips64
++	#else
++	CPU=
++	#endif
++	#endif
++EOF
++	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
++	    /^CPU/{
++		s: ::g
++		p
++	    }'`"
++	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++	;;
++    or32:Linux:*:*)
++	echo or32-unknown-linux-gnu
++	exit ;;
++    ppc:Linux:*:*)
++	echo powerpc-unknown-linux-gnu
++	exit ;;
++    ppc64:Linux:*:*)
++	echo powerpc64-unknown-linux-gnu
++	exit ;;
++    alpha:Linux:*:*)
++	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++	  EV5)   UNAME_MACHINE=alphaev5 ;;
++	  EV56)  UNAME_MACHINE=alphaev56 ;;
++	  PCA56) UNAME_MACHINE=alphapca56 ;;
++	  PCA57) UNAME_MACHINE=alphapca56 ;;
++	  EV6)   UNAME_MACHINE=alphaev6 ;;
++	  EV67)  UNAME_MACHINE=alphaev67 ;;
++	  EV68*) UNAME_MACHINE=alphaev68 ;;
++        esac
++	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
++	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++	exit ;;
++    parisc:Linux:*:* | hppa:Linux:*:*)
++	# Look for CPU level
++	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
++	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
++	  *)    echo hppa-unknown-linux-gnu ;;
++	esac
++	exit ;;
++    parisc64:Linux:*:* | hppa64:Linux:*:*)
++	echo hppa64-unknown-linux-gnu
++	exit ;;
++    s390:Linux:*:* | s390x:Linux:*:*)
++	echo ${UNAME_MACHINE}-ibm-linux
++	exit ;;
++    sh64*:Linux:*:*)
++    	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    sh*:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    sparc:Linux:*:* | sparc64:Linux:*:*)
++	echo ${UNAME_MACHINE}-unknown-linux-gnu
++	exit ;;
++    vax:Linux:*:*)
++	echo ${UNAME_MACHINE}-dec-linux-gnu
++	exit ;;
++    x86_64:Linux:*:*)
++	echo x86_64-unknown-linux-gnu
++	exit ;;
++    i*86:Linux:*:*)
+ 	# The BFD linker knows what the default object file format is, so
+ 	# first see if it will tell us. cd to the root directory to prevent
+ 	# problems with other programs or directories called `ld' in the path.
+-	ld_supported_emulations=`cd /; ld --help 2>&1 \
+-			 | sed -ne '/supported emulations:/!d
++	# Set LC_ALL=C to ensure ld outputs messages in English.
++	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
++			 | sed -ne '/supported targets:/!d
+ 				    s/[ 	][ 	]*/ /g
+-				    s/.*supported emulations: *//
++				    s/.*supported targets: *//
+ 				    s/ .*//
+ 				    p'`
+-        case "$ld_supported_emulations" in
+-	  *ia64)
+-		echo "${UNAME_MACHINE}-unknown-linux"
+-		exit 0
+-		;;
+-	  i?86linux)
+-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+-		exit 0
+-		;;
+-	  elf_i?86)
++        case "$ld_supported_targets" in
++	  elf32-i386)
+ 		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ 		;;
+-	  i?86coff)
++	  a.out-i386-linux)
++		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
++		exit ;;
++	  coff-i386)
+ 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+-		exit 0
+-		;;
+-	  sparclinux)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+-		exit 0
+-		;;
+-	  elf32_sparc)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+-		exit 0
+-		;;
+-	  armlinux)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+-		exit 0
+-		;;
+-	  elf32arm*)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnuoldld"
+-		exit 0
+-		;;
+-	  armelf_linux*)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+-		exit 0
+-		;;
+-	  m68klinux)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnuaout"
+-		exit 0
+-		;;
+-	  elf32ppc | elf32ppclinux)
+-		# Determine Lib Version
+-		cat >$dummy.c <<EOF
+-#include <features.h>
+-#if defined(__GLIBC__)
+-extern char __libc_version[];
+-extern char __libc_release[];
+-#endif
+-main(argc, argv)
+-     int argc;
+-     char *argv[];
+-{
+-#if defined(__GLIBC__)
+-  printf("%s %s\n", __libc_version, __libc_release);
+-#else
+-  printf("unkown\n");
+-#endif
+-  return 0;
+-}
+-EOF
+-		LIBC=""
+-		$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+-		if test "$?" = 0 ; then
+-			./$dummy | grep 1\.99 > /dev/null
+-			if test "$?" = 0 ; then
+-				LIBC="libc1"
+-			fi
+-		fi
+-		rm -f $dummy.c $dummy
+-		echo powerpc-unknown-linux-gnu${LIBC}
+-		exit 0
+-		;;
+-	  shelf_linux)
+-		echo "${UNAME_MACHINE}-unknown-linux-gnu"
+-		exit 0
+-		;;
++		exit ;;
++	  "")
++		# Either a pre-BFD a.out linker (linux-gnuoldld) or
++		# one that does not give us useful --help.
++		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
++		exit ;;
+ 	esac
+-
+-	if test "${UNAME_MACHINE}" = "alpha" ; then
+-		cat <<EOF >$dummy.s
+-			.data
+-		\$Lformat:
+-			.byte 37,100,45,37,120,10,0	# "%d-%x\n"
+-
+-			.text
+-			.globl main
+-			.align 4
+-			.ent main
+-		main:
+-			.frame \$30,16,\$26,0
+-			ldgp \$29,0(\$27)
+-			.prologue 1
+-			.long 0x47e03d80 # implver \$0
+-			lda \$2,-1
+-			.long 0x47e20c21 # amask \$2,\$1
+-			lda \$16,\$Lformat
+-			mov \$0,\$17
+-			not \$1,\$18
+-			jsr \$26,printf
+-			ldgp \$29,0(\$26)
+-			mov 0,\$16
+-			jsr \$26,exit
+-			.end main
+-EOF
+-		LIBC=""
+-		$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+-		if test "$?" = 0 ; then
+-			case `./$dummy` in
+-			0-0)
+-				UNAME_MACHINE="alpha"
+-				;;
+-			1-0)
+-				UNAME_MACHINE="alphaev5"
+-				;;
+-			1-1)
+-				UNAME_MACHINE="alphaev56"
+-				;;
+-			1-101)
+-				UNAME_MACHINE="alphapca56"
+-				;;
+-			2-303)
+-				UNAME_MACHINE="alphaev6"
+-				;;
+-			2-307)
+-				UNAME_MACHINE="alphaev67"
+-				;;
+-			esac
+-
+-			objdump --private-headers $dummy | \
+-			  grep ld.so.1 > /dev/null
+-			if test "$?" = 0 ; then
+-				LIBC="libc1"
+-			fi
+-		fi
+-		rm -f $dummy.s $dummy
+-		echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+-	elif test "${UNAME_MACHINE}" = "mips" ; then
+-	  cat >$dummy.c <<EOF
+-#ifdef __cplusplus
+-#include <stdio.h>  /* for printf() prototype */
+-	int main (int argc, char *argv[]) {
+-#else
+-	int main (argc, argv) int argc; char *argv[]; {
+-#endif
+-#ifdef __MIPSEB__
+-  printf ("%s-unknown-linux-gnu\n", argv[1]);
+-#endif
+-#ifdef __MIPSEL__
+-  printf ("%sel-unknown-linux-gnu\n", argv[1]);
+-#endif
+-  return 0;
+-}
+-EOF
+-	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+-	  rm -f $dummy.c $dummy
+-	elif test "${UNAME_MACHINE}" = "s390"; then
+-	  echo s390-ibm-linux && exit 0
+-	elif test "${UNAME_MACHINE}" = "x86_64"; then
+-	  echo x86_64-unknown-linux-gnu && exit 0
+-	elif test "${UNAME_MACHINE}" = "parisc" -o "${UNAME_MACHINE}" = "hppa"; then
+-	  # Look for CPU level
+-	  case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+-	    PA7*)
+-		echo hppa1.1-unknown-linux-gnu
+-		;;
+-	    PA8*)
+-		echo hppa2.0-unknown-linux-gnu
+-		;;
+-	    *)
+-		echo hppa-unknown-linux-gnu
+-		;;
+-	  esac
+-	  exit 0
+-	else
+-	  # Either a pre-BFD a.out linker (linux-gnuoldld)
+-	  # or one that does not give us useful --help.
+-	  # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+-	  # If ld does not provide *any* "supported emulations:"
+-	  # that means it is gnuoldld.
+-	  test -z "$ld_supported_emulations" \
+-	    && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+-
+-	  case "${UNAME_MACHINE}" in
+-	  i?86)
+-	    VENDOR=pc;
+-	    ;;
+-	  *)
+-	    VENDOR=unknown;
+-	    ;;
+-	  esac
+-	  # Determine whether the default compiler is a.out or elf
+-	  cat >$dummy.c <<EOF
+-#include <features.h>
+-#ifdef __cplusplus
+-#include <stdio.h>  /* for printf() prototype */
+-	int main (int argc, char *argv[]) {
+-#else
+-	int main (argc, argv) int argc; char *argv[]; {
+-#endif
+-#ifdef __ELF__
+-# ifdef __GLIBC__
+-#  if __GLIBC__ >= 2
+-    printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+-#  else
+-    printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+-#  endif
+-# else
+-   printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+-# endif
+-#else
+-  printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+-#endif
+-  return 0;
+-}
++	# Determine whether the default compiler is a.out or elf
++	eval $set_cc_for_build
++	sed 's/^	//' << EOF >$dummy.c
++	#include <features.h>
++	#ifdef __ELF__
++	# ifdef __GLIBC__
++	#  if __GLIBC__ >= 2
++	LIBC=gnu
++	#  else
++	LIBC=gnulibc1
++	#  endif
++	# else
++	LIBC=gnulibc1
++	# endif
++	#else
++	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun)
++	LIBC=gnu
++	#else
++	LIBC=gnuaout
++	#endif
++	#endif
++	#ifdef __dietlibc__
++	LIBC=dietlibc
++	#endif
+ EOF
+-	  $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
+-	  rm -f $dummy.c $dummy
+-	  test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+-	fi ;;
+-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.  earlier versions
+-# are messed up and put the nodename in both sysname and nodename.
+-    i?86:DYNIX/ptx:4*:*)
++	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
++	    /^LIBC/{
++		s: ::g
++		p
++	    }'`"
++	test x"${LIBC}" != x && {
++		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++		exit
++	}
++	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
++	;;
++    i*86:DYNIX/ptx:4*:*)
++	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++	# earlier versions are messed up and put the nodename in both
++	# sysname and nodename.
+ 	echo i386-sequent-sysv4
+-	exit 0 ;;
+-    i?86:UNIX_SV:4.2MP:2.*)
++	exit ;;
++    i*86:UNIX_SV:4.2MP:2.*)
+         # Unixware is an offshoot of SVR4, but it has its own version
+         # number series starting with 2...
+         # I am not positive that other SVR4 systems won't match this,
+ 	# I just have to hope.  -- rms.
+         # Use sysv4.2uw... so that sysv4* matches it.
+ 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+-	exit 0 ;;
+-    i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*)
++	exit ;;
++    i*86:OS/2:*:*)
++	# If we were able to find `uname', then EMX Unix compatibility
++	# is probably installed.
++	echo ${UNAME_MACHINE}-pc-os2-emx
++	exit ;;
++    i*86:XTS-300:*:STOP)
++	echo ${UNAME_MACHINE}-unknown-stop
++	exit ;;
++    i*86:atheos:*:*)
++	echo ${UNAME_MACHINE}-unknown-atheos
++	exit ;;
++    i*86:syllable:*:*)
++	echo ${UNAME_MACHINE}-pc-syllable
++	exit ;;
++    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
++	echo i386-unknown-lynxos${UNAME_RELEASE}
++	exit ;;
++    i*86:*DOS:*:*)
++	echo ${UNAME_MACHINE}-pc-msdosdjgpp
++	exit ;;
++    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ 		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ 	else
+ 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ 	fi
+-	exit 0 ;;
+-    i?86:*:5:7*)
+-        # Fixed at (any) Pentium or better
+-        UNAME_MACHINE=i586
+-        if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+-	    echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+-	else
+-	    echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+-	fi
+-	exit 0 ;;
+-    i?86:*:3.2:*)
++	exit ;;
++    i*86:*:5:[678]*)
++    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
++	case `/bin/uname -X | grep "^Machine"` in
++	    *486*)	     UNAME_MACHINE=i486 ;;
++	    *Pentium)	     UNAME_MACHINE=i586 ;;
++	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++	esac
++	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++	exit ;;
++    i*86:*:3.2:*)
+ 	if test -f /usr/options/cb.name; then
+ 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ 		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ 	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+-		UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+-		(/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+-		(/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
++		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ 			&& UNAME_MACHINE=i586
+-		(/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
++		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ 			&& UNAME_MACHINE=i686
+-		(/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
++		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ 			&& UNAME_MACHINE=i686
+ 		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ 	else
+ 		echo ${UNAME_MACHINE}-pc-sysv32
+ 	fi
+-	exit 0 ;;
+-    i?86:*DOS:*:*)
+-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+-	exit 0 ;;
++	exit ;;
+     pc:*:*:*)
+ 	# Left here for compatibility:
+         # uname -m prints for DJGPP always 'pc', but it prints nothing about
+         # the processor, so we play safe by assuming i386.
+ 	echo i386-pc-msdosdjgpp
+-        exit 0 ;;
++        exit ;;
+     Intel:Mach:3*:*)
+ 	echo i386-pc-mach3
+-	exit 0 ;;
++	exit ;;
+     paragon:*:*:*)
+ 	echo i860-intel-osf1
+-	exit 0 ;;
++	exit ;;
+     i860:*:4.*:*) # i860-SVR4
+ 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ 	else # Add other i860-SVR4 vendors below as they are discovered.
+ 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+ 	fi
+-	exit 0 ;;
++	exit ;;
+     mini*:CTIX:SYS*5:*)
+ 	# "miniframe"
+ 	echo m68010-convergent-sysv
+-	exit 0 ;;
+-    M68*:*:R3V[567]*:*)
+-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
++	exit ;;
++    mc68k:UNIX:SYSTEM5:3.51m)
++	echo m68k-convergent-sysv
++	exit ;;
++    M680?0:D-NIX:5.3:*)
++	echo m68k-diab-dnix
++	exit ;;
++    M68*:*:R3V[5678]*:*)
++	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ 	OS_REL=''
+ 	test -r /etc/.relid \
+ 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
++	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
++	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+-          && echo i486-ncr-sysv4 && exit 0 ;;
+-    m68*:LynxOS:2.*:*)
++          && { echo i486-ncr-sysv4; exit; } ;;
++    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ 	echo m68k-unknown-lynxos${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     mc68030:UNIX_System_V:4.*:*)
+ 	echo m68k-atari-sysv4
+-	exit 0 ;;
+-    i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*)
+-	echo i386-unknown-lynxos${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     TSUNAMI:LynxOS:2.*:*)
+ 	echo sparc-unknown-lynxos${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     rs6000:LynxOS:2.*:*)
+ 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+-	exit 0 ;;
+-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:*)
++	exit ;;
++    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+ 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     SM[BE]S:UNIX_SV:*:*)
+ 	echo mips-dde-sysv${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     RM*:ReliantUNIX-*:*:*)
+ 	echo mips-sni-sysv4
+-	exit 0 ;;
++	exit ;;
+     RM*:SINIX-*:*:*)
+ 	echo mips-sni-sysv4
+-	exit 0 ;;
++	exit ;;
+     *:SINIX-*:*:*)
+ 	if uname -p 2>/dev/null >/dev/null ; then
+ 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+@@ -1110,78 +1152,98 @@ EOF
+ 	else
+ 		echo ns32k-sni-sysv
+ 	fi
+-	exit 0 ;;
+-    PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+-                           # says <Richard.M.Bartel@ccMail.Census.GOV>
++	exit ;;
++    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+         echo i586-unisys-sysv4
+-        exit 0 ;;
++        exit ;;
+     *:UNIX_System_V:4*:FTX*)
+ 	# From Gerald Hewes <hewes@openmarket.com>.
+ 	# How about differentiating between stratus architectures? -djm
+ 	echo hppa1.1-stratus-sysv4
+-	exit 0 ;;
++	exit ;;
+     *:*:*:FTX*)
+ 	# From seanf@swdc.stratus.com.
+ 	echo i860-stratus-sysv4
+-	exit 0 ;;
++	exit ;;
++    i*86:VOS:*:*)
++	# From Paul.Green@stratus.com.
++	echo ${UNAME_MACHINE}-stratus-vos
++	exit ;;
++    *:VOS:*:*)
++	# From Paul.Green@stratus.com.
++	echo hppa1.1-stratus-vos
++	exit ;;
+     mc68*:A/UX:*:*)
+ 	echo m68k-apple-aux${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     news*:NEWS-OS:6*:*)
+ 	echo mips-sony-newsos6
+-	exit 0 ;;
++	exit ;;
+     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ 	if [ -d /usr/nec ]; then
+ 	        echo mips-nec-sysv${UNAME_RELEASE}
+ 	else
+ 	        echo mips-unknown-sysv${UNAME_RELEASE}
+ 	fi
+-        exit 0 ;;
++        exit ;;
+     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+ 	echo powerpc-be-beos
+-	exit 0 ;;
++	exit ;;
+     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+ 	echo powerpc-apple-beos
+-	exit 0 ;;
++	exit ;;
+     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+ 	echo i586-pc-beos
+-	exit 0 ;;
++	exit ;;
+     SX-4:SUPER-UX:*:*)
+ 	echo sx4-nec-superux${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     SX-5:SUPER-UX:*:*)
+ 	echo sx5-nec-superux${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
++    SX-6:SUPER-UX:*:*)
++	echo sx6-nec-superux${UNAME_RELEASE}
++	exit ;;
+     Power*:Rhapsody:*:*)
+ 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:Rhapsody:*:*)
+ 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:Darwin:*:*)
+-	echo `uname -p`-apple-darwin${UNAME_RELEASE}
+-	exit 0 ;;
++	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++	case $UNAME_PROCESSOR in
++	    unknown) UNAME_PROCESSOR=powerpc ;;
++	esac
++	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++	exit ;;
+     *:procnto*:*:* | *:QNX:[0123456789]*:*)
+-	if test "${UNAME_MACHINE}" = "x86pc"; then
++	UNAME_PROCESSOR=`uname -p`
++	if test "$UNAME_PROCESSOR" = "x86"; then
++		UNAME_PROCESSOR=i386
+ 		UNAME_MACHINE=pc
+ 	fi
+-	echo `uname -p`-${UNAME_MACHINE}-nto-qnx
+-	exit 0 ;;
++	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++	exit ;;
+     *:QNX:*:4*)
+ 	echo i386-pc-qnx
+-	exit 0 ;;
+-    NSR-[KW]:NONSTOP_KERNEL:*:*)
++	exit ;;
++    NSE-?:NONSTOP_KERNEL:*:*)
++	echo nse-tandem-nsk${UNAME_RELEASE}
++	exit ;;
++    NSR-?:NONSTOP_KERNEL:*:*)
+ 	echo nsr-tandem-nsk${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:NonStop-UX:*:*)
+ 	echo mips-compaq-nonstopux
+-	exit 0 ;;
++	exit ;;
+     BS2000:POSIX*:*:*)
+ 	echo bs2000-siemens-sysv
+-	exit 0 ;;
++	exit ;;
+     DS/*:UNIX_System_V:*:*)
+ 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+-	exit 0 ;;
++	exit ;;
+     *:Plan9:*:*)
+ 	# "uname -m" is not consistent, so use $cputype instead. 386
+ 	# is converted to i386 for consistency with other x86
+@@ -1192,35 +1254,53 @@ EOF
+ 	    UNAME_MACHINE="$cputype"
+ 	fi
+ 	echo ${UNAME_MACHINE}-unknown-plan9
+-	exit 0 ;;
+-    i?86:OS/2:*:*)
+-	# If we were able to find `uname', then EMX Unix compatibility
+-	# is probably installed.
+-	echo ${UNAME_MACHINE}-pc-os2-emx
+-	exit 0 ;;
++	exit ;;
+     *:TOPS-10:*:*)
+ 	echo pdp10-unknown-tops10
+-	exit 0 ;;
++	exit ;;
+     *:TENEX:*:*)
+ 	echo pdp10-unknown-tenex
+-	exit 0 ;;
++	exit ;;
+     KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ 	echo pdp10-dec-tops20
+-	exit 0 ;;
++	exit ;;
+     XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ 	echo pdp10-xkl-tops20
+-	exit 0 ;;
++	exit ;;
+     *:TOPS-20:*:*)
+ 	echo pdp10-unknown-tops20
+-	exit 0 ;;
++	exit ;;
+     *:ITS:*:*)
+ 	echo pdp10-unknown-its
+-	exit 0 ;;
++	exit ;;
++    SEI:*:*:SEIUX)
++        echo mips-sei-seiux${UNAME_RELEASE}
++	exit ;;
++    *:DragonFly:*:*)
++	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++	exit ;;
++    *:*VMS:*:*)
++    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
++	case "${UNAME_MACHINE}" in
++	    A*) echo alpha-dec-vms ; exit ;;
++	    I*) echo ia64-dec-vms ; exit ;;
++	    V*) echo vax-dec-vms ; exit ;;
++	esac ;;
++    *:XENIX:*:SysV)
++	echo i386-pc-xenix
++	exit ;;
++    i*86:skyos:*:*)
++	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++	exit ;;
++    i*86:rdos:*:*)
++	echo ${UNAME_MACHINE}-pc-rdos
++	exit ;;
+ esac
+ 
+ #echo '(No uname command or uname output not recognized.)' 1>&2
+ #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+ 
++eval $set_cc_for_build
+ cat >$dummy.c <<EOF
+ #ifdef _SEQUENT_
+ # include <sys/types.h>
+@@ -1246,7 +1326,7 @@ main ()
+ #endif
+ 
+ #if defined (__arm) && defined (__acorn) && defined (__unix)
+-  printf ("arm-acorn-riscix"); exit (0);
++  printf ("arm-acorn-riscix\n"); exit (0);
+ #endif
+ 
+ #if defined (hp300) && !defined (hpux)
+@@ -1307,11 +1387,24 @@ main ()
+ #endif
+ 
+ #if defined (vax)
+-#if !defined (ultrix)
+-  printf ("vax-dec-bsd\n"); exit (0);
+-#else
+-  printf ("vax-dec-ultrix\n"); exit (0);
+-#endif
++# if !defined (ultrix)
++#  include <sys/param.h>
++#  if defined (BSD)
++#   if BSD == 43
++      printf ("vax-dec-bsd4.3\n"); exit (0);
++#   else
++#    if BSD == 199006
++      printf ("vax-dec-bsd4.3reno\n"); exit (0);
++#    else
++      printf ("vax-dec-bsd\n"); exit (0);
++#    endif
++#   endif
++#  else
++    printf ("vax-dec-bsd\n"); exit (0);
++#  endif
++# else
++    printf ("vax-dec-ultrix\n"); exit (0);
++# endif
+ #endif
+ 
+ #if defined (alliant) && defined (i860)
+@@ -1322,12 +1415,12 @@ main ()
+ }
+ EOF
+ 
+-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
+-rm -f $dummy.c $dummy
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++	{ echo "$SYSTEM_NAME"; exit; }
+ 
+ # Apollos put the system type in the environment.
+ 
+-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+ 
+ # Convex versions that predate uname can use getsysinfo(1)
+ 
+@@ -1336,22 +1429,22 @@ then
+     case `getsysinfo -f cpu_type` in
+     c1*)
+ 	echo c1-convex-bsd
+-	exit 0 ;;
++	exit ;;
+     c2*)
+ 	if getsysinfo -f scalar_acc
+ 	then echo c32-convex-bsd
+ 	else echo c2-convex-bsd
+ 	fi
+-	exit 0 ;;
++	exit ;;
+     c34*)
+ 	echo c34-convex-bsd
+-	exit 0 ;;
++	exit ;;
+     c38*)
+ 	echo c38-convex-bsd
+-	exit 0 ;;
++	exit ;;
+     c4*)
+ 	echo c4-convex-bsd
+-	exit 0 ;;
++	exit ;;
+     esac
+ fi
+ 
+@@ -1362,7 +1455,9 @@ This script, last modified $timestamp, h
+ the operating system you are using. It is advised that you
+ download the most up to date version of the config scripts from
+ 
+-    ftp://ftp.gnu.org/pub/gnu/config/
++  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
++and
++  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+ 
+ If the version you run ($0) is already up to date, please
+ send the following data and any information you think might be
+diff -puriN SDL_gfx-2.0.13.old/config.sub SDL_gfx-2.0.13/config.sub
+--- SDL_gfx-2.0.13.old/config.sub	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/config.sub	2006-02-25 16:29:12.000000000 +0100
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Configuration validation subroutine script.
+-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+-#   Free Software Foundation, Inc.
++#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 
+-timestamp='2001-01-12'
++timestamp='2006-02-23'
+ 
+ # This file is (in principle) common to ALL GNU software.
+ # The presence of a machine in this file suggests that SOME GNU software
+@@ -21,15 +21,17 @@ timestamp='2001-01-12'
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330,
+-# Boston, MA 02111-1307, USA.
+-
++# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
++# 02110-1301, USA.
++#
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+ 
+-# Please send patches to <config-patches@gnu.org>.
++
++# Please send patches to <config-patches@gnu.org>.  Submit a context
++# diff and a properly formatted ChangeLog entry.
+ #
+ # Configuration subroutine to validate and canonicalize a configuration type.
+ # Supply the specified configuration type as an argument.
+@@ -69,7 +71,7 @@ Report bugs and patches to <config-patch
+ version="\
+ GNU config.sub ($timestamp)
+ 
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+ 
+ This is free software; see the source for copying conditions.  There is NO
+@@ -82,11 +84,11 @@ Try \`$me --help' for more information."
+ while test $# -gt 0 ; do
+   case $1 in
+     --time-stamp | --time* | -t )
+-       echo "$timestamp" ; exit 0 ;;
++       echo "$timestamp" ; exit ;;
+     --version | -v )
+-       echo "$version" ; exit 0 ;;
++       echo "$version" ; exit ;;
+     --help | --h* | -h )
+-       echo "$usage"; exit 0 ;;
++       echo "$usage"; exit ;;
+     -- )     # Stop option processing
+        shift; break ;;
+     - )	# Use stdin as input.
+@@ -98,7 +100,7 @@ while test $# -gt 0 ; do
+     *local*)
+        # First pass through any local machine types.
+        echo $1
+-       exit 0;;
++       exit ;;
+ 
+     * )
+        break ;;
+@@ -117,7 +119,9 @@ esac
+ # Here we must recognize all the valid KERNEL-OS combinations.
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+-  nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*)
++  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
++  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
++  storm-chaos* | os2-emx* | rtmk-nova*)
+     os=-$maybe_os
+     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+     ;;
+@@ -143,7 +147,7 @@ case $os in
+ 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+-	-apple | -axis)
++	-apple | -axis | -knuth | -cray)
+ 		os=
+ 		basic_machine=$1
+ 		;;
+@@ -157,9 +161,21 @@ case $os in
+ 		os=-vxworks
+ 		basic_machine=$1
+ 		;;
++	-chorusos*)
++		os=-chorusos
++		basic_machine=$1
++		;;
++ 	-chorusrdb)
++ 		os=-chorusrdb
++		basic_machine=$1
++ 		;;
+ 	-hiux*)
+ 		os=-hiuxwe2
+ 		;;
++	-sco6)
++		os=-sco5v6
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
+ 	-sco5)
+ 		os=-sco3.2v5
+ 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+@@ -176,6 +192,10 @@ case $os in
+ 		# Don't forget version if it is 3.2v4 or newer.
+ 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ 		;;
++	-sco5v6*)
++		# Don't forget version if it is 3.2v4 or newer.
++		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++		;;
+ 	-sco*)
+ 		os=-sco3.2v2
+ 		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+@@ -215,24 +235,58 @@ esac
+ case $basic_machine in
+ 	# Recognize the basic CPU types without company name.
+ 	# Some are omitted here because they have special meanings below.
+-	tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
+-	        | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
+-		| pyramid | mn10200 | mn10300 | tron | a29k \
+-		| 580 | i960 | h8300 \
+-		| x86 | ppcbe | mipsbe | mipsle | shbe | shle \
+-		| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+-		| hppa64 \
+-		| alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+-		| alphaev6[78] \
+-		| we32k | ns16k | clipper | i370 | sh | sh[34] \
+-		| powerpc | powerpcle \
+-		| 1750a | dsp16xx | pdp10 | pdp11 \
+-		| mips16 | mips64 | mipsel | mips64el \
+-		| mips64orion | mips64orionel | mipstx39 | mipstx39el \
+-		| mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+-		| mips64vr5000 | miprs64vr5000el | mcore \
+-		| sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
+-		| thumb | d10v | d30v | fr30 | avr | openrisc)
++	1750a | 580 \
++	| a29k \
++	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++	| am33_2.0 \
++	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
++	| bfin \
++	| c4x | clipper \
++	| d10v | d30v | dlx | dsp16xx \
++	| fr30 | frv \
++	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++	| i370 | i860 | i960 | ia64 \
++	| ip2k | iq2000 \
++	| m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \
++	| mips | mipsbe | mipseb | mipsel | mipsle \
++	| mips16 \
++	| mips64 | mips64el \
++	| mips64vr | mips64vrel \
++	| mips64orion | mips64orionel \
++	| mips64vr4100 | mips64vr4100el \
++	| mips64vr4300 | mips64vr4300el \
++	| mips64vr5000 | mips64vr5000el \
++	| mips64vr5900 | mips64vr5900el \
++	| mipsisa32 | mipsisa32el \
++	| mipsisa32r2 | mipsisa32r2el \
++	| mipsisa64 | mipsisa64el \
++	| mipsisa64r2 | mipsisa64r2el \
++	| mipsisa64sb1 | mipsisa64sb1el \
++	| mipsisa64sr71k | mipsisa64sr71kel \
++	| mipstx39 | mipstx39el \
++	| mn10200 | mn10300 \
++	| mt \
++	| msp430 \
++	| nios | nios2 \
++	| ns16k | ns32k \
++	| or32 \
++	| pdp10 | pdp11 | pj | pjl \
++	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
++	| pyramid \
++	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
++	| sh64 | sh64le \
++	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
++	| sparcv8 | sparcv9 | sparcv9b \
++	| strongarm \
++	| tahoe | thumb | tic4x | tic80 | tron \
++	| v850 | v850e \
++	| we32k \
++	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
++	| z8k)
++		basic_machine=$basic_machine-unknown
++		;;
++	m32c)
+ 		basic_machine=$basic_machine-unknown
+ 		;;
+ 	m6811 | m68hc11 | m6812 | m68hc12)
+@@ -240,13 +294,16 @@ case $basic_machine in
+ 		basic_machine=$basic_machine-unknown
+ 		os=-none
+ 		;;
+-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl)
++	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
++		;;
++	ms1)
++		basic_machine=mt-unknown
+ 		;;
+ 
+ 	# We use `pc' rather than `unknown'
+ 	# because (1) that's what they normally are, and
+ 	# (2) the word "unknown" tends to confuse beginning users.
+-	i[234567]86 | x86_64)
++	i*86 | x86_64)
+ 	  basic_machine=$basic_machine-pc
+ 	  ;;
+ 	# Object if more than one company name word.
+@@ -255,29 +312,68 @@ case $basic_machine in
+ 		exit 1
+ 		;;
+ 	# Recognize the basic CPU types with company name.
+-	# FIXME: clean up the formatting here.
+-	vax-* | tahoe-* | i[234567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+-	      | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
+-	      | arm-*  | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
+-	      | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+-	      | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+-	      | xmp-* | ymp-* \
+-	      | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
+-	      | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+-	      | hppa2.0n-* | hppa64-* \
+-	      | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+-	      | alphaev6[78]-* \
+-	      | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+-	      | clipper-* | orion-* \
+-	      | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+-	      | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
+-	      | mips64el-* | mips64orion-* | mips64orionel-* \
+-	      | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+-	      | mipstx39-* | mipstx39el-* | mcore-* \
+-	      | f30[01]-* | f700-* | s390-* | sv1-* | t3e-* \
+-	      | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+-	      | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* \
+-	      | bs2000-* | tic54x-* | c54x-* | x86_64-*)
++	580-* \
++	| a29k-* \
++	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
++	| avr-* \
++	| bfin-* | bs2000-* \
++	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
++	| clipper-* | craynv-* | cydra-* \
++	| d10v-* | d30v-* | dlx-* \
++	| elxsi-* \
++	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
++	| h8300-* | h8500-* \
++	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++	| i*86-* | i860-* | i960-* | ia64-* \
++	| ip2k-* | iq2000-* \
++	| m32r-* | m32rle-* \
++	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++	| m88110-* | m88k-* | maxq-* | mcore-* \
++	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++	| mips16-* \
++	| mips64-* | mips64el-* \
++	| mips64vr-* | mips64vrel-* \
++	| mips64orion-* | mips64orionel-* \
++	| mips64vr4100-* | mips64vr4100el-* \
++	| mips64vr4300-* | mips64vr4300el-* \
++	| mips64vr5000-* | mips64vr5000el-* \
++	| mips64vr5900-* | mips64vr5900el-* \
++	| mipsisa32-* | mipsisa32el-* \
++	| mipsisa32r2-* | mipsisa32r2el-* \
++	| mipsisa64-* | mipsisa64el-* \
++	| mipsisa64r2-* | mipsisa64r2el-* \
++	| mipsisa64sb1-* | mipsisa64sb1el-* \
++	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
++	| mipstx39-* | mipstx39el-* \
++	| mmix-* \
++	| mt-* \
++	| msp430-* \
++	| nios-* | nios2-* \
++	| none-* | np1-* | ns16k-* | ns32k-* \
++	| orion-* \
++	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
++	| pyramid-* \
++	| romp-* | rs6000-* \
++	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
++	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
++	| sparclite-* \
++	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
++	| tahoe-* | thumb-* \
++	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++	| tron-* \
++	| v850-* | v850e-* | vax-* \
++	| we32k-* \
++	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
++	| xstormy16-* | xtensa-* \
++	| ymp-* \
++	| z8k-*)
++		;;
++	m32c-*)
+ 		;;
+ 	# Recognize the various machine names and aliases which stand
+ 	# for a CPU type and a company and sometimes even an OS.
+@@ -295,6 +391,9 @@ case $basic_machine in
+ 		basic_machine=a29k-amd
+ 		os=-udi
+ 		;;
++    	abacus)
++		basic_machine=abacus-unknown
++		;;
+ 	adobe68k)
+ 		basic_machine=m68010-adobe
+ 		os=-scout
+@@ -309,6 +408,12 @@ case $basic_machine in
+ 		basic_machine=a29k-none
+ 		os=-bsd
+ 		;;
++	amd64)
++		basic_machine=x86_64-pc
++		;;
++	amd64-*)
++		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
+ 	amdahl)
+ 		basic_machine=580-amdahl
+ 		os=-sysv
+@@ -340,6 +445,10 @@ case $basic_machine in
+ 		basic_machine=ns32k-sequent
+ 		os=-dynix
+ 		;;
++	c90)
++		basic_machine=c90-cray
++		os=-unicos
++		;;
+ 	convex-c1)
+ 		basic_machine=c1-convex
+ 		os=-bsd
+@@ -360,30 +469,45 @@ case $basic_machine in
+ 		basic_machine=c38-convex
+ 		os=-bsd
+ 		;;
+-	cray | ymp)
+-		basic_machine=ymp-cray
++	cray | j90)
++		basic_machine=j90-cray
+ 		os=-unicos
+ 		;;
+-	cray2)
+-		basic_machine=cray2-cray
+-		os=-unicos
++	craynv)
++		basic_machine=craynv-cray
++		os=-unicosmp
+ 		;;
+-	[ctj]90-cray)
+-		basic_machine=c90-cray
+-		os=-unicos
++	cr16c)
++		basic_machine=cr16c-unknown
++		os=-elf
+ 		;;
+ 	crds | unos)
+ 		basic_machine=m68k-crds
+ 		;;
++	crisv32 | crisv32-* | etraxfs*)
++		basic_machine=crisv32-axis
++		;;
+ 	cris | cris-* | etrax*)
+ 		basic_machine=cris-axis
+ 		;;
++	crx)
++		basic_machine=crx-unknown
++		os=-elf
++		;;
+ 	da30 | da30-*)
+ 		basic_machine=m68k-da30
+ 		;;
+ 	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ 		basic_machine=mips-dec
+ 		;;
++	decsystem10* | dec10*)
++		basic_machine=pdp10-dec
++		os=-tops10
++		;;
++	decsystem20* | dec20*)
++		basic_machine=pdp10-dec
++		os=-tops20
++		;;
+ 	delta | 3300 | motorola-3300 | motorola-delta \
+ 	      | 3300-motorola | delta-motorola)
+ 		basic_machine=m68k-motorola
+@@ -392,6 +516,10 @@ case $basic_machine in
+ 		basic_machine=m88k-motorola
+ 		os=-sysv3
+ 		;;
++	djgpp)
++		basic_machine=i586-pc
++		os=-msdosdjgpp
++		;;
+ 	dpx20 | dpx20-*)
+ 		basic_machine=rs6000-bull
+ 		os=-bosx
+@@ -425,6 +553,10 @@ case $basic_machine in
+ 		basic_machine=tron-gmicro
+ 		os=-sysv
+ 		;;
++	go32)
++		basic_machine=i386-pc
++		os=-go32
++		;;
+ 	h3050r* | hiux*)
+ 		basic_machine=hppa1.1-hitachi
+ 		os=-hiuxwe2
+@@ -500,19 +632,19 @@ case $basic_machine in
+ 		basic_machine=i370-ibm
+ 		;;
+ # I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+-	i[34567]86v32)
++	i*86v32)
+ 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ 		os=-sysv32
+ 		;;
+-	i[34567]86v4*)
++	i*86v4*)
+ 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ 		os=-sysv4
+ 		;;
+-	i[34567]86v)
++	i*86v)
+ 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ 		os=-sysv
+ 		;;
+-	i[34567]86sol2)
++	i*86sol2)
+ 		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ 		os=-solaris2
+ 		;;
+@@ -524,18 +656,6 @@ case $basic_machine in
+ 		basic_machine=i386-unknown
+ 		os=-vsta
+ 		;;
+-	i386-go32 | go32)
+-		basic_machine=i386-unknown
+-		os=-go32
+-		;;
+-	i386-mingw32 | mingw32)
+-		basic_machine=i386-unknown
+-		os=-mingw32
+-		;;
+-	i[34567]86-pw32 | pw32)
+-		basic_machine=i586-unknown
+-		os=-pw32
+-		;;
+ 	iris | iris4d)
+ 		basic_machine=mips-sgi
+ 		case $os in
+@@ -561,6 +681,10 @@ case $basic_machine in
+ 		basic_machine=ns32k-utek
+ 		os=-sysv
+ 		;;
++	mingw32)
++		basic_machine=i386-pc
++		os=-mingw32
++		;;
+ 	miniframe)
+ 		basic_machine=m68000-convergent
+ 		;;
+@@ -568,32 +692,27 @@ case $basic_machine in
+ 		basic_machine=m68k-atari
+ 		os=-mint
+ 		;;
+-	mipsel*-linux*)
+-		basic_machine=mipsel-unknown
+-		os=-linux-gnu
+-		;;
+-	mips*-linux*)
+-		basic_machine=mips-unknown
+-		os=-linux-gnu
+-		;;
+ 	mips3*-*)
+ 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ 		;;
+ 	mips3*)
+ 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ 		;;
+-	mmix*)
+-		basic_machine=mmix-knuth
+-		os=-mmixware
+-		;;
+ 	monitor)
+ 		basic_machine=m68k-rom68k
+ 		os=-coff
+ 		;;
++	morphos)
++		basic_machine=powerpc-unknown
++		os=-morphos
++		;;
+ 	msdos)
+-		basic_machine=i386-unknown
++		basic_machine=i386-pc
+ 		os=-msdos
+ 		;;
++	ms1-*)
++		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
++		;;
+ 	mvs)
+ 		basic_machine=i370-ibm
+ 		os=-mvs
+@@ -669,6 +788,13 @@ case $basic_machine in
+ 		basic_machine=hppa1.1-oki
+ 		os=-proelf
+ 		;;
++	openrisc | openrisc-*)
++		basic_machine=or32-unknown
++		;;
++	os400)
++		basic_machine=powerpc-ibm
++		os=-os400
++		;;
+ 	OSE68000 | ose68000)
+ 		basic_machine=m68000-ericsson
+ 		os=-ose
+@@ -691,45 +817,75 @@ case $basic_machine in
+ 	pbb)
+ 		basic_machine=m68k-tti
+ 		;;
+-        pc532 | pc532-*)
++	pc532 | pc532-*)
+ 		basic_machine=ns32k-pc532
+ 		;;
+-	pentium | p5 | k5 | k6 | nexgen)
++	pc98)
++		basic_machine=i386-pc
++		;;
++	pc98-*)
++		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	pentium | p5 | k5 | k6 | nexgen | viac3)
+ 		basic_machine=i586-pc
+ 		;;
+-	pentiumpro | p6 | 6x86 | athlon)
++	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ 		basic_machine=i686-pc
+ 		;;
+-	pentiumii | pentium2)
++	pentiumii | pentium2 | pentiumiii | pentium3)
+ 		basic_machine=i686-pc
+ 		;;
+-	pentium-* | p5-* | k5-* | k6-* | nexgen-*)
++	pentium4)
++		basic_machine=i786-pc
++		;;
++	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ 		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ 		;;
+ 	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ 		;;
+-	pentiumii-* | pentium2-*)
++	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ 		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ 		;;
++	pentium4-*)
++		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
+ 	pn)
+ 		basic_machine=pn-gould
+ 		;;
+ 	power)	basic_machine=power-ibm
+ 		;;
+ 	ppc)	basic_machine=powerpc-unknown
+-	        ;;
++		;;
+ 	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ 		;;
+ 	ppcle | powerpclittle | ppc-le | powerpc-little)
+ 		basic_machine=powerpcle-unknown
+-	        ;;
++		;;
+ 	ppcle-* | powerpclittle-*)
+ 		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ 		;;
++	ppc64)	basic_machine=powerpc64-unknown
++		;;
++	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
++	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++		basic_machine=powerpc64le-unknown
++		;;
++	ppc64le-* | powerpc64little-*)
++		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++		;;
+ 	ps2)
+ 		basic_machine=i386-ibm
+ 		;;
++	pw32)
++		basic_machine=i586-unknown
++		os=-pw32
++		;;
++	rdos)
++		basic_machine=i386-pc
++		os=-rdos
++		;;
+ 	rom68k)
+ 		basic_machine=m68k-rom68k
+ 		os=-coff
+@@ -740,10 +896,26 @@ case $basic_machine in
+ 	rtpc | rtpc-*)
+ 		basic_machine=romp-ibm
+ 		;;
++	s390 | s390-*)
++		basic_machine=s390-ibm
++		;;
++	s390x | s390x-*)
++		basic_machine=s390x-ibm
++		;;
+ 	sa29200)
+ 		basic_machine=a29k-amd
+ 		os=-udi
+ 		;;
++	sb1)
++		basic_machine=mipsisa64sb1-unknown
++		;;
++	sb1el)
++		basic_machine=mipsisa64sb1el-unknown
++		;;
++	sei)
++		basic_machine=mips-sei
++		os=-seiux
++		;;
+ 	sequent)
+ 		basic_machine=i386-sequent
+ 		;;
+@@ -751,7 +923,10 @@ case $basic_machine in
+ 		basic_machine=sh-hitachi
+ 		os=-hms
+ 		;;
+-	sparclite-wrs)
++	sh64)
++		basic_machine=sh64-unknown
++		;;
++	sparclite-wrs | simso-wrs)
+ 		basic_machine=sparclite-wrs
+ 		os=-vxworks
+ 		;;
+@@ -818,22 +993,42 @@ case $basic_machine in
+ 		os=-dynix
+ 		;;
+ 	t3e)
+-		basic_machine=t3e-cray
++		basic_machine=alphaev5-cray
++		os=-unicos
++		;;
++	t90)
++		basic_machine=t90-cray
+ 		os=-unicos
+ 		;;
+ 	tic54x | c54x*)
+ 		basic_machine=tic54x-unknown
+ 		os=-coff
+ 		;;
++	tic55x | c55x*)
++		basic_machine=tic55x-unknown
++		os=-coff
++		;;
++	tic6x | c6x*)
++		basic_machine=tic6x-unknown
++		os=-coff
++		;;
+ 	tx39)
+ 		basic_machine=mipstx39-unknown
+ 		;;
+ 	tx39el)
+ 		basic_machine=mipstx39el-unknown
+ 		;;
++	toad1)
++		basic_machine=pdp10-xkl
++		os=-tops20
++		;;
+ 	tower | tower-32)
+ 		basic_machine=m68k-ncr
+ 		;;
++	tpf)
++		basic_machine=s390x-ibm
++		os=-tpf
++		;;
+ 	udi29k)
+ 		basic_machine=a29k-amd
+ 		os=-udi
+@@ -855,8 +1050,8 @@ case $basic_machine in
+ 		os=-vms
+ 		;;
+ 	vpp*|vx|vx-*)
+-               basic_machine=f301-fujitsu
+-               ;;
++		basic_machine=f301-fujitsu
++		;;
+ 	vxworks960)
+ 		basic_machine=i960-wrs
+ 		os=-vxworks
+@@ -877,13 +1072,17 @@ case $basic_machine in
+ 		basic_machine=hppa1.1-winbond
+ 		os=-proelf
+ 		;;
+-	xmp)
+-		basic_machine=xmp-cray
+-		os=-unicos
++	xbox)
++		basic_machine=i686-pc
++		os=-mingw32
+ 		;;
+-        xps | xps100)
++	xps | xps100)
+ 		basic_machine=xps100-honeywell
+ 		;;
++	ymp)
++		basic_machine=ymp-cray
++		os=-unicos
++		;;
+ 	z8k-*-coff)
+ 		basic_machine=z8k-unknown
+ 		os=-sim
+@@ -904,16 +1103,12 @@ case $basic_machine in
+ 	op60c)
+ 		basic_machine=hppa1.1-oki
+ 		;;
+-	mips)
+-		if [ x$os = x-linux-gnu ]; then
+-			basic_machine=mips-unknown
+-		else
+-			basic_machine=mips-mips
+-		fi
+-		;;
+ 	romp)
+ 		basic_machine=romp-ibm
+ 		;;
++	mmix)
++		basic_machine=mmix-knuth
++		;;
+ 	rs6000)
+ 		basic_machine=rs6000-ibm
+ 		;;
+@@ -930,13 +1125,13 @@ case $basic_machine in
+ 	we32k)
+ 		basic_machine=we32k-att
+ 		;;
+-	sh3 | sh4)
++	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+ 		basic_machine=sh-unknown
+ 		;;
+-	sparc | sparcv9)
++	sparc | sparcv8 | sparcv9 | sparcv9b)
+ 		basic_machine=sparc-sun
+ 		;;
+-        cydra)
++	cydra)
+ 		basic_machine=cydra-cydrome
+ 		;;
+ 	orion)
+@@ -951,9 +1146,8 @@ case $basic_machine in
+ 	pmac | pmac-mpw)
+ 		basic_machine=powerpc-apple
+ 		;;
+-	c4x*)
+-		basic_machine=c4x-none
+-		os=-coff
++	*-unknown)
++		# Make sure to match an already-canonicalized machine name.
+ 		;;
+ 	*)
+ 		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+@@ -1007,36 +1201,49 @@ case $os in
+ 	      | -aos* \
+ 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
++	      | -openbsd* | -solidbsd* \
++	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++	      | -chorusos* | -chorusrdb* \
+ 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+-	      | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
++	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
++	      | -uxpv* | -beos* | -mpeix* | -udk* \
++	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
++	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
++	      | -skyos* | -haiku* | -rdos*)
+ 	# Remember, each alternative MUST END IN *, to match a version number.
+ 		;;
+ 	-qnx*)
+ 		case $basic_machine in
+-		    x86-* | i[34567]86-*)
++		    x86-* | i*86-*)
+ 			;;
+ 		    *)
+ 			os=-nto$os
+ 			;;
+ 		esac
+ 		;;
++	-nto-qnx*)
++		;;
+ 	-nto*)
+-		os=-nto-qnx
++		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ 		;;
+ 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
++	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ 		;;
+ 	-mac*)
+ 		os=`echo $os | sed -e 's|mac|macos|'`
+ 		;;
++	-linux-dietlibc)
++		os=-linux-dietlibc
++		;;
+ 	-linux*)
+ 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ 		;;
+@@ -1049,6 +1256,9 @@ case $os in
+ 	-opened*)
+ 		os=-openedition
+ 		;;
++        -os400*)
++		os=-os400
++		;;
+ 	-wince*)
+ 		os=-wince
+ 		;;
+@@ -1067,14 +1277,23 @@ case $os in
+ 	-acis*)
+ 		os=-aos
+ 		;;
++	-atheos*)
++		os=-atheos
++		;;
++	-syllable*)
++		os=-syllable
++		;;
+ 	-386bsd)
+ 		os=-bsd
+ 		;;
+ 	-ctix* | -uts*)
+ 		os=-sysv
+ 		;;
++	-nova*)
++		os=-rtmk-nova
++		;;
+ 	-ns2 )
+-	        os=-nextstep2
++		os=-nextstep2
+ 		;;
+ 	-nsk*)
+ 		os=-nsk
+@@ -1086,6 +1305,9 @@ case $os in
+ 	-sinix*)
+ 		os=-sysv4
+ 		;;
++        -tpf*)
++		os=-tpf
++		;;
+ 	-triton*)
+ 		os=-sysv3
+ 		;;
+@@ -1113,8 +1335,17 @@ case $os in
+ 	-xenix)
+ 		os=-xenix
+ 		;;
+-        -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+-	        os=-mint
++	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++		os=-mint
++		;;
++	-aros*)
++		os=-aros
++		;;
++	-kaos*)
++		os=-kaos
++		;;
++	-zvmoe)
++		os=-zvmoe
+ 		;;
+ 	-none)
+ 		;;
+@@ -1147,10 +1378,14 @@ case $basic_machine in
+ 	arm*-semi)
+ 		os=-aout
+ 		;;
++    c4x-* | tic4x-*)
++        os=-coff
++        ;;
++	# This must come before the *-dec entry.
+ 	pdp10-*)
+ 		os=-tops20
+ 		;;
+-        pdp11-*)
++	pdp11-*)
+ 		os=-none
+ 		;;
+ 	*-dec | vax-*)
+@@ -1177,6 +1412,9 @@ case $basic_machine in
+ 	mips*-*)
+ 		os=-elf
+ 		;;
++	or32-*)
++		os=-coff
++		;;
+ 	*-tti)	# must be before sparc entry or we get the wrong os.
+ 		os=-sysv3
+ 		;;
+@@ -1186,9 +1424,15 @@ case $basic_machine in
+ 	*-be)
+ 		os=-beos
+ 		;;
++	*-haiku)
++		os=-haiku
++		;;
+ 	*-ibm)
+ 		os=-aix
+ 		;;
++    	*-knuth)
++		os=-mmixware
++		;;
+ 	*-wec)
+ 		os=-proelf
+ 		;;
+@@ -1240,19 +1484,19 @@ case $basic_machine in
+ 	*-next)
+ 		os=-nextstep3
+ 		;;
+-        *-gould)
++	*-gould)
+ 		os=-sysv
+ 		;;
+-        *-highlevel)
++	*-highlevel)
+ 		os=-bsd
+ 		;;
+ 	*-encore)
+ 		os=-bsd
+ 		;;
+-        *-sgi)
++	*-sgi)
+ 		os=-irix
+ 		;;
+-        *-siemens)
++	*-siemens)
+ 		os=-sysv4
+ 		;;
+ 	*-masscomp)
+@@ -1321,10 +1565,16 @@ case $basic_machine in
+ 			-mvs* | -opened*)
+ 				vendor=ibm
+ 				;;
++			-os400*)
++				vendor=ibm
++				;;
+ 			-ptx*)
+ 				vendor=sequent
+ 				;;
+-			-vxsim* | -vxworks*)
++			-tpf*)
++				vendor=ibm
++				;;
++			-vxsim* | -vxworks* | -windiss*)
+ 				vendor=wrs
+ 				;;
+ 			-aux*)
+@@ -1339,13 +1589,16 @@ case $basic_machine in
+ 			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ 				vendor=atari
+ 				;;
++			-vos*)
++				vendor=stratus
++				;;
+ 		esac
+ 		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ 		;;
+ esac
+ 
+ echo $basic_machine$os
+-exit 0
++exit
+ 
+ # Local variables:
+ # eval: (add-hook 'write-file-hooks 'time-stamp)
+diff -puriN SDL_gfx-2.0.13.old/configure SDL_gfx-2.0.13/configure
+--- SDL_gfx-2.0.13.old/configure	2004-12-21 14:48:18.000000000 +0100
++++ SDL_gfx-2.0.13/configure	2006-03-01 18:29:46.000000000 +0100
+@@ -241,6 +241,160 @@ IFS=" 	$as_nl"
+ $as_unset CDPATH
+ 
+ 
++
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$ECHO in
++X*--fallback-echo)
++  # Remove one level of quotation (which was required for Make).
++  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
++  ;;
++esac
++
++echo=${ECHO-echo}
++if test "X$1" = X--no-reexec; then
++  # Discard the --no-reexec flag, and continue.
++  shift
++elif test "X$1" = X--fallback-echo; then
++  # Avoid inline document here, it may be left over
++  :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
++  # Yippee, $echo works!
++  :
++else
++  # Restart under the correct shell.
++  exec $SHELL "$0" --no-reexec ${1+"$@"}
++fi
++
++if test "X$1" = X--fallback-echo; then
++  # used as fallback echo
++  shift
++  cat <<EOF
++$*
++EOF
++  exit 0
++fi
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++if test -z "$ECHO"; then
++if test "X${echo_test_string+set}" != Xset; then
++# find a string as large as possible, as long as the shell can cope with it
++  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
++    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
++       echo_test_string=`eval $cmd` &&
++       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
++    then
++      break
++    fi
++  done
++fi
++
++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++   test "X$echo_testing_string" = "X$echo_test_string"; then
++  :
++else
++  # The Solaris, AIX, and Digital Unix default echo programs unquote
++  # backslashes.  This makes it impossible to quote backslashes using
++  #   echo "$something" | sed 's/\\/\\\\/g'
++  #
++  # So, first we look for a working echo in the user's PATH.
++
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for dir in $PATH /usr/ucb; do
++    IFS="$lt_save_ifs"
++    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++       test "X$echo_testing_string" = "X$echo_test_string"; then
++      echo="$dir/echo"
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++
++  if test "X$echo" = Xecho; then
++    # We didn't find a better echo, so look for alternatives.
++    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
++       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
++       test "X$echo_testing_string" = "X$echo_test_string"; then
++      # This shell has a builtin print -r that does the trick.
++      echo='print -r'
++    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
++	 test "X$CONFIG_SHELL" != X/bin/ksh; then
++      # If we have ksh, try running configure again with it.
++      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++      export ORIGINAL_CONFIG_SHELL
++      CONFIG_SHELL=/bin/ksh
++      export CONFIG_SHELL
++      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
++    else
++      # Try using printf.
++      echo='printf %s\n'
++      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++	 test "X$echo_testing_string" = "X$echo_test_string"; then
++	# Cool, printf works
++	:
++      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
++	   test "X$echo_testing_string" = 'X\t' &&
++	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++	   test "X$echo_testing_string" = "X$echo_test_string"; then
++	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++	export CONFIG_SHELL
++	SHELL="$CONFIG_SHELL"
++	export SHELL
++	echo="$CONFIG_SHELL $0 --fallback-echo"
++      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
++	   test "X$echo_testing_string" = 'X\t' &&
++	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++	   test "X$echo_testing_string" = "X$echo_test_string"; then
++	echo="$CONFIG_SHELL $0 --fallback-echo"
++      else
++	# maybe with a smaller string...
++	prev=:
++
++	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
++	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
++	  then
++	    break
++	  fi
++	  prev="$cmd"
++	done
++
++	if test "$prev" != 'sed 50q "$0"'; then
++	  echo_test_string=`eval $prev`
++	  export echo_test_string
++	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
++	else
++	  # Oops.  We lost completely, so just stick with echo.
++	  echo=echo
++	fi
++      fi
++    fi
++  fi
++fi
++fi
++
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++ECHO=$echo
++if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
++   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
++fi
++
++
++
++
++tagnames=${tagnames+${tagnames},}CXX
++
++tagnames=${tagnames+${tagnames},}F77
++
+ # Name of the host.
+ # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+ # so uname gets run too.
+@@ -272,7 +426,44 @@ PACKAGE_STRING=
+ PACKAGE_BUGREPORT=
+ 
+ ac_unique_file="SDL_gfxPrimitives.c"
+-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAJOR_VERSION MINOR_VERSION MICRO_VERSION INTERFACE_AGE BINARY_AGE VERSION LT_RELEASE LT_CURRENT LT_REVISION LT_AGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os RANLIB ac_ct_RANLIB CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LN_S LIBTOOL CXX CXXFLAGS ac_ct_CXX CPP X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS MATHLIB SDL_CONFIG SDL_CFLAGS SDL_LIBS LIBOBJS LTLIBOBJS'
++# Factoring default headers for most tests.
++ac_includes_default="\
++#include <stdio.h>
++#if HAVE_SYS_TYPES_H
++# include <sys/types.h>
++#endif
++#if HAVE_SYS_STAT_H
++# include <sys/stat.h>
++#endif
++#if STDC_HEADERS
++# include <stdlib.h>
++# include <stddef.h>
++#else
++# if HAVE_STDLIB_H
++#  include <stdlib.h>
++# endif
++#endif
++#if HAVE_STRING_H
++# if !STDC_HEADERS && HAVE_MEMORY_H
++#  include <memory.h>
++# endif
++# include <string.h>
++#endif
++#if HAVE_STRINGS_H
++# include <strings.h>
++#endif
++#if HAVE_INTTYPES_H
++# include <inttypes.h>
++#else
++# if HAVE_STDINT_H
++#  include <stdint.h>
++# endif
++#endif
++#if HAVE_UNISTD_H
++# include <unistd.h>
++#endif"
++
++ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS MAJOR_VERSION MINOR_VERSION MICRO_VERSION INTERFACE_AGE BINARY_AGE VERSION LT_RELEASE LT_CURRENT LT_REVISION LT_AGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL X_CFLAGS X_PRE_LIBS X_LIBS X_EXTRA_LIBS MATHLIB SDL_CONFIG SDL_CFLAGS SDL_LIBS LIBOBJS LTLIBOBJS'
+ ac_subst_files=''
+ 
+ # Initialize some variables set by options.
+@@ -729,6 +920,10 @@ ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ ac_env_CPPFLAGS_value=$CPPFLAGS
+ ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ ac_cv_env_CPPFLAGS_value=$CPPFLAGS
++ac_env_CPP_set=${CPP+set}
++ac_env_CPP_value=$CPP
++ac_cv_env_CPP_set=${CPP+set}
++ac_cv_env_CPP_value=$CPP
+ ac_env_CXX_set=${CXX+set}
+ ac_env_CXX_value=$CXX
+ ac_cv_env_CXX_set=${CXX+set}
+@@ -737,10 +932,18 @@ ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ ac_env_CXXFLAGS_value=$CXXFLAGS
+ ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+-ac_env_CPP_set=${CPP+set}
+-ac_env_CPP_value=$CPP
+-ac_cv_env_CPP_set=${CPP+set}
+-ac_cv_env_CPP_value=$CPP
++ac_env_CXXCPP_set=${CXXCPP+set}
++ac_env_CXXCPP_value=$CXXCPP
++ac_cv_env_CXXCPP_set=${CXXCPP+set}
++ac_cv_env_CXXCPP_value=$CXXCPP
++ac_env_F77_set=${F77+set}
++ac_env_F77_value=$F77
++ac_cv_env_F77_set=${F77+set}
++ac_cv_env_F77_value=$F77
++ac_env_FFLAGS_set=${FFLAGS+set}
++ac_env_FFLAGS_value=$FFLAGS
++ac_cv_env_FFLAGS_set=${FFLAGS+set}
++ac_cv_env_FFLAGS_value=$FFLAGS
+ 
+ #
+ # Report the --help message.
+@@ -825,9 +1028,16 @@ if test -n "$ac_init_help"; then
+ Optional Features:
+   --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+-  --enable-shared=PKGS  build shared libraries default=yes
+-  --enable-static=PKGS  build static libraries default=yes
+-  --enable-fast-install=PKGS  optimize for fast installation default=yes
++  --enable-maintainer-mode  enable make rules and dependencies not useful
++			  (and sometimes confusing) to the casual installer
++  --enable-shared[=PKGS]
++                          build shared libraries [default=yes]
++  --enable-static[=PKGS]
++                          build static libraries [default=yes]
++  --enable-fast-install[=PKGS]
++                          optimize for fast installation [default=yes]
++  --disable-dependency-tracking  speeds up one-time build
++  --enable-dependency-tracking   do not reject slow dependency extractors
+   --disable-libtool-lock  avoid locking (might break parallel builds)
+   --enable-mmx            use mmx assembly on x86 default=yes
+   --disable-sdltest       Do not try to compile and run a test SDL program
+@@ -835,7 +1045,11 @@ Optional Features:
+ Optional Packages:
+   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+-  --with-gnu-ld           assume the C compiler uses GNU ld default=no
++  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
++  --with-pic              try to use only PIC/non-PIC objects [default=use
++                          both]
++  --with-tags[=TAGS]
++                          include additional configurations [automatic]
+   --with-x                use the X Window System
+   --with-sdl-prefix=PFX   Prefix where SDL is installed (optional)
+   --with-sdl-exec-prefix=PFX Exec prefix where SDL is installed (optional)
+@@ -847,9 +1061,12 @@ Some influential environment variables:
+               nonstandard directory <lib dir>
+   CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
+               headers in a nonstandard directory <include dir>
++  CPP         C preprocessor
+   CXX         C++ compiler command
+   CXXFLAGS    C++ compiler flags
+-  CPP         C preprocessor
++  CXXCPP      C++ preprocessor
++  F77         Fortran 77 compiler command
++  FFLAGS      Fortran 77 compiler flags
+ 
+ Use these variables to override the choices made by `configure' or to help
+ it to find libraries and programs with nonstandard names/locations.
+@@ -942,7 +1159,7 @@ esac
+     else
+       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+     fi
+-    cd $ac_popdir
++    cd "$ac_popdir"
+   done
+ fi
+ 
+@@ -1306,7 +1523,7 @@ MAJOR_VERSION=2
+ MINOR_VERSION=0
+ MICRO_VERSION=13
+ INTERFACE_AGE=0
+-BINARY_AGE=0
++BINARY_AGE=9
+ VERSION=$MAJOR_VERSION.$MINOR_VERSION.$MICRO_VERSION
+ 
+ 
+@@ -1327,7 +1544,7 @@ LT_AGE=`expr $BINARY_AGE - $INTERFACE_AG
+ 
+ 
+ 
+-am__api_version="1.4"
++am__api_version="1.9"
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+   if test -f $ac_dir/install-sh; then
+@@ -1436,20 +1653,21 @@ echo "$as_me:$LINENO: checking whether b
+ echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+ # Just in case
+ sleep 1
+-echo timestamp > conftestfile
++echo timestamp > conftest.file
+ # Do `set' in a subshell so we don't clobber the current shell's
+ # arguments.  Must try -L first in case configure is actually a
+ # symlink; some systems play weird games with the mod time of symlinks
+ # (eg FreeBSD returns the mod time of the symlink's containing
+ # directory).
+ if (
+-   set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
++   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+    if test "$*" = "X"; then
+       # -L didn't work.
+-      set X `ls -t $srcdir/configure conftestfile`
++      set X `ls -t $srcdir/configure conftest.file`
+    fi
+-   if test "$*" != "X $srcdir/configure conftestfile" \
+-      && test "$*" != "X conftestfile $srcdir/configure"; then
++   rm -f conftest.file
++   if test "$*" != "X $srcdir/configure conftest.file" \
++      && test "$*" != "X conftest.file $srcdir/configure"; then
+ 
+       # If neither matched, then we have a broken ls.  This can happen
+       # if, for instance, CONFIG_SHELL is bash and it inherits a
+@@ -1462,7 +1680,7 @@ alias in your environment" >&2;}
+    { (exit 1); exit 1; }; }
+    fi
+ 
+-   test "$2" = conftestfile
++   test "$2" = conftest.file
+    )
+ then
+    # Ok.
+@@ -1474,7 +1692,6 @@ echo "$as_me: error: newly created file 
+ Check your system clock" >&2;}
+    { (exit 1); exit 1; }; }
+ fi
+-rm -f conftest*
+ echo "$as_me:$LINENO: result: yes" >&5
+ echo "${ECHO_T}yes" >&6
+ test "$program_prefix" != NONE &&
+@@ -1490,6 +1707,92 @@ _ACEOF
+ program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+ rm conftest.sed
+ 
++# expand $ac_aux_dir to an absolute path
++am_aux_dir=`cd $ac_aux_dir && pwd`
++
++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
++# Use eval to expand $SHELL
++if eval "$MISSING --run true"; then
++  am_missing_run="$MISSING --run "
++else
++  am_missing_run=
++  { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
++fi
++
++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
++  # We used to keeping the `.' as first argument, in order to
++  # allow $(mkdir_p) to be used without argument.  As in
++  #   $(mkdir_p) $(somedir)
++  # where $(somedir) is conditionally defined.  However this is wrong
++  # for two reasons:
++  #  1. if the package is installed by a user who cannot write `.'
++  #     make install will fail,
++  #  2. the above comment should most certainly read
++  #     $(mkdir_p) $(DESTDIR)$(somedir)
++  #     so it does not work when $(somedir) is undefined and
++  #     $(DESTDIR) is not.
++  #  To support the latter case, we have to write
++  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
++  #  so the `.' trick is pointless.
++  mkdir_p='mkdir -p --'
++else
++  # On NextStep and OpenStep, the `mkdir' command does not
++  # recognize any option.  It will interpret all options as
++  # directories to create, and then abort because `.' already
++  # exists.
++  for d in ./-p ./--version;
++  do
++    test -d $d && rmdir $d
++  done
++  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
++  if test -f "$ac_aux_dir/mkinstalldirs"; then
++    mkdir_p='$(mkinstalldirs)'
++  else
++    mkdir_p='$(install_sh) -d'
++  fi
++fi
++
++for ac_prog in gawk mawk nawk awk
++do
++  # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_AWK+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$AWK"; then
++  ac_cv_prog_AWK="$AWK" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_AWK="$ac_prog"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++AWK=$ac_cv_prog_AWK
++if test -n "$AWK"; then
++  echo "$as_me:$LINENO: result: $AWK" >&5
++echo "${ECHO_T}$AWK" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  test -n "$AWK" && break
++done
++
+ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+ echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+ set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+@@ -1519,17 +1822,38 @@ echo "${ECHO_T}no" >&6
+   SET_MAKE="MAKE=${MAKE-make}"
+ fi
+ 
+-
+-PACKAGE=SDL_gfx
+-
+-VERSION=$VERSION
+-
+-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
++rm -rf .tst 2>/dev/null
++mkdir .tst 2>/dev/null
++if test -d .tst; then
++  am__leading_dot=.
++else
++  am__leading_dot=_
++fi
++rmdir .tst 2>/dev/null
++
++# test to see if srcdir already configured
++if test "`cd $srcdir && pwd`" != "`pwd`" &&
++   test -f $srcdir/config.status; then
+   { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+ echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
+    { (exit 1); exit 1; }; }
+ fi
+ 
++# test whether we have cygpath
++if test -z "$CYGPATH_W"; then
++  if (cygpath --version) >/dev/null 2>/dev/null; then
++    CYGPATH_W='cygpath -w'
++  else
++    CYGPATH_W=echo
++  fi
++fi
++
++
++# Define the identity of the package.
++ PACKAGE=SDL_gfx
++ VERSION=$VERSION
++
++
+ cat >>confdefs.h <<_ACEOF
+ #define PACKAGE "$PACKAGE"
+ _ACEOF
+@@ -1539,84 +1863,147 @@ cat >>confdefs.h <<_ACEOF
+ #define VERSION "$VERSION"
+ _ACEOF
+ 
++# Some tools Automake needs.
++
++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
++
++
++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
++
++
++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
++
++
++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
++
++
++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
++
++install_sh=${install_sh-"$am_aux_dir/install-sh"}
++
++# Installed binaries are usually stripped using `strip' when the user
++# run `make install-strip'.  However `strip' might not be the right
++# tool to use in cross-compilation environments, therefore Automake
++# will honor the `STRIP' environment variable to overrule this program.
++if test "$cross_compiling" != no; then
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_STRIP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$STRIP"; then
++  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++  echo "$as_me:$LINENO: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++  ac_ct_STRIP=$STRIP
++  # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_STRIP"; then
++  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_STRIP="strip"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  STRIP=$ac_ct_STRIP
++else
++  STRIP="$ac_cv_prog_STRIP"
++fi
++
++fi
++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
++
++# We need awk for the "check" target.  The system "awk" is bad on
++# some platforms.
++# Always define AMTAR for backward compatibility.
++
++AMTAR=${AMTAR-"${am_missing_run}tar"}
++
++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
++
+ 
+ 
+-missing_dir=`cd $ac_aux_dir && pwd`
+-echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
+-echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf.  Sigh.
+-if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+-   ACLOCAL=aclocal-${am__api_version}
+-   echo "$as_me:$LINENO: result: found" >&5
+-echo "${ECHO_T}found" >&6
+-else
+-   ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
+-   echo "$as_me:$LINENO: result: missing" >&5
+-echo "${ECHO_T}missing" >&6
+-fi
+-
+-echo "$as_me:$LINENO: checking for working autoconf" >&5
+-echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf.  Sigh.
+-if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+-   AUTOCONF=autoconf
+-   echo "$as_me:$LINENO: result: found" >&5
+-echo "${ECHO_T}found" >&6
+-else
+-   AUTOCONF="$missing_dir/missing autoconf"
+-   echo "$as_me:$LINENO: result: missing" >&5
+-echo "${ECHO_T}missing" >&6
+-fi
+-
+-echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
+-echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf.  Sigh.
+-if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+-   AUTOMAKE=automake-${am__api_version}
+-   echo "$as_me:$LINENO: result: found" >&5
+-echo "${ECHO_T}found" >&6
+-else
+-   AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
+-   echo "$as_me:$LINENO: result: missing" >&5
+-echo "${ECHO_T}missing" >&6
+-fi
+-
+-echo "$as_me:$LINENO: checking for working autoheader" >&5
+-echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf.  Sigh.
+-if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+-   AUTOHEADER=autoheader
+-   echo "$as_me:$LINENO: result: found" >&5
+-echo "${ECHO_T}found" >&6
+-else
+-   AUTOHEADER="$missing_dir/missing autoheader"
+-   echo "$as_me:$LINENO: result: missing" >&5
+-echo "${ECHO_T}missing" >&6
+-fi
+-
+-echo "$as_me:$LINENO: checking for working makeinfo" >&5
+-echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
+-# Run test in a subshell; some versions of sh will print an error if
+-# an executable is not found, even if stderr is redirected.
+-# Redirect stdin to placate older versions of autoconf.  Sigh.
+-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+-   MAKEINFO=makeinfo
+-   echo "$as_me:$LINENO: result: found" >&5
+-echo "${ECHO_T}found" >&6
+-else
+-   MAKEINFO="$missing_dir/missing makeinfo"
+-   echo "$as_me:$LINENO: result: missing" >&5
+-echo "${ECHO_T}missing" >&6
++
++
++echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
++echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
++    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
++if test "${enable_maintainer_mode+set}" = set; then
++  enableval="$enable_maintainer_mode"
++  USE_MAINTAINER_MODE=$enableval
++else
++  USE_MAINTAINER_MODE=no
++fi;
++  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
++echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
++
++
++if test $USE_MAINTAINER_MODE = yes; then
++  MAINTAINER_MODE_TRUE=
++  MAINTAINER_MODE_FALSE='#'
++else
++  MAINTAINER_MODE_TRUE='#'
++  MAINTAINER_MODE_FALSE=
+ fi
+ 
++  MAINT=$MAINTAINER_MODE_TRUE
++
+ 
+ 
+ # Make sure we can run config.sub.
+@@ -1703,163 +2090,155 @@ test -n "$target_alias" &&
+   program_prefix=${target_alias}-
+ 
+ 
++
+ # Check whether --enable-shared or --disable-shared was given.
+ if test "${enable_shared+set}" = set; then
+   enableval="$enable_shared"
+   p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_shared=yes ;;
+-no) enable_shared=no ;;
+-*)
+-  enable_shared=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_shared=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac
++    case $enableval in
++    yes) enable_shared=yes ;;
++    no) enable_shared=no ;;
++    *)
++      enable_shared=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_shared=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac
+ else
+   enable_shared=yes
+ fi;
++
+ # Check whether --enable-static or --disable-static was given.
+ if test "${enable_static+set}" = set; then
+   enableval="$enable_static"
+   p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_static=yes ;;
+-no) enable_static=no ;;
+-*)
+-  enable_static=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_static=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac
++    case $enableval in
++    yes) enable_static=yes ;;
++    no) enable_static=no ;;
++    *)
++     enable_static=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_static=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac
+ else
+   enable_static=yes
+ fi;
++
+ # Check whether --enable-fast-install or --disable-fast-install was given.
+ if test "${enable_fast_install+set}" = set; then
+   enableval="$enable_fast_install"
+   p=${PACKAGE-default}
+-case "$enableval" in
+-yes) enable_fast_install=yes ;;
+-no) enable_fast_install=no ;;
+-*)
+-  enable_fast_install=no
+-  # Look at the argument we got.  We use all the common list separators.
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+-  for pkg in $enableval; do
+-    if test "X$pkg" = "X$p"; then
+-      enable_fast_install=yes
+-    fi
+-  done
+-  IFS="$ac_save_ifs"
+-  ;;
+-esac
++    case $enableval in
++    yes) enable_fast_install=yes ;;
++    no) enable_fast_install=no ;;
++    *)
++      enable_fast_install=no
++      # Look at the argument we got.  We use all the common list separators.
++      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++      for pkg in $enableval; do
++	IFS="$lt_save_ifs"
++	if test "X$pkg" = "X$p"; then
++	  enable_fast_install=yes
++	fi
++      done
++      IFS="$lt_save_ifs"
++      ;;
++    esac
+ else
+   enable_fast_install=yes
+ fi;
++
++DEPDIR="${am__leading_dot}deps"
++
++          ac_config_commands="$ac_config_commands depfiles"
++
++
++am_make=${MAKE-make}
++cat > confinc << 'END'
++am__doit:
++	@echo done
++.PHONY: am__doit
++END
++# If we don't find an include directive, just comment out the code.
++echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
++am__include="#"
++am__quote=
++_am_result=none
++# First try GNU make style include.
++echo "include confinc" > confmf
++# We grep out `Entering directory' and `Leaving directory'
++# messages which can occur if `w' ends up in MAKEFLAGS.
++# In particular we don't look at `^make:' because GNU make might
++# be invoked under some other name (usually "gmake"), in which
++# case it prints its new name instead of `make'.
++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
++   am__include=include
++   am__quote=
++   _am_result=GNU
++fi
++# Now try BSD make style include.
++if test "$am__include" = "#"; then
++   echo '.include "confinc"' > confmf
++   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
++      am__include=.include
++      am__quote="\""
++      _am_result=BSD
++   fi
++fi
++
++
++echo "$as_me:$LINENO: result: $_am_result" >&5
++echo "${ECHO_T}$_am_result" >&6
++rm -f confinc confmf
++
++# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
++if test "${enable_dependency_tracking+set}" = set; then
++  enableval="$enable_dependency_tracking"
++
++fi;
++if test "x$enable_dependency_tracking" != xno; then
++  am_depcomp="$ac_aux_dir/depcomp"
++  AMDEPBACKSLASH='\'
++fi
++
++
++if test "x$enable_dependency_tracking" != xno; then
++  AMDEP_TRUE=
++  AMDEP_FALSE='#'
++else
++  AMDEP_TRUE='#'
++  AMDEP_FALSE=
++fi
++
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ if test -n "$ac_tool_prefix"; then
+-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
++  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
+ echo "$as_me:$LINENO: checking for $ac_word" >&5
+ echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_RANLIB+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  if test -n "$RANLIB"; then
+-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
+-fi
+-fi
+-RANLIB=$ac_cv_prog_RANLIB
+-if test -n "$RANLIB"; then
+-  echo "$as_me:$LINENO: result: $RANLIB" >&5
+-echo "${ECHO_T}$RANLIB" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+-
+-fi
+-if test -z "$ac_cv_prog_RANLIB"; then
+-  ac_ct_RANLIB=$RANLIB
+-  # Extract the first word of "ranlib", so it can be a program name with args.
+-set dummy ranlib; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  if test -n "$ac_ct_RANLIB"; then
+-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+-else
+-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+-for as_dir in $PATH
+-do
+-  IFS=$as_save_IFS
+-  test -z "$as_dir" && as_dir=.
+-  for ac_exec_ext in '' $ac_executable_extensions; do
+-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+-    ac_cv_prog_ac_ct_RANLIB="ranlib"
+-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+-    break 2
+-  fi
+-done
+-done
+-
+-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+-fi
+-fi
+-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+-if test -n "$ac_ct_RANLIB"; then
+-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+-else
+-  echo "$as_me:$LINENO: result: no" >&5
+-echo "${ECHO_T}no" >&6
+-fi
+-
+-  RANLIB=$ac_ct_RANLIB
+-else
+-  RANLIB="$ac_cv_prog_RANLIB"
+-fi
+-
+-ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+-if test -n "$ac_tool_prefix"; then
+-  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+-set dummy ${ac_tool_prefix}gcc; ac_word=$2
+-echo "$as_me:$LINENO: checking for $ac_word" >&5
+-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+-if test "${ac_cv_prog_CC+set}" = set; then
++if test "${ac_cv_prog_CC+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$CC"; then
+@@ -2417,8 +2796,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -2476,8 +2854,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -2593,8 +2970,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -2648,8 +3024,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -2694,8 +3069,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -2739,8 +3113,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -2779,6 +3152,187 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ 
++depcc="$CC"   am_compiler_list=
++
++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++  # We make a subdir and do the tests there.  Otherwise we can end up
++  # making bogus files that we don't know about and never remove.  For
++  # instance it was reported that on HP-UX the gcc test will end up
++  # making a dummy file named `D' -- because `-MD' means `put the output
++  # in D'.
++  mkdir conftest.dir
++  # Copy depcomp to subdir because otherwise we won't find it if we're
++  # using a relative directory.
++  cp "$am_depcomp" conftest.dir
++  cd conftest.dir
++  # We will build objects and dependencies in a subdirectory because
++  # it helps to detect inapplicable dependency modes.  For instance
++  # both Tru64's cc and ICC support -MD to output dependencies as a
++  # side effect of compilation, but ICC will put the dependencies in
++  # the current directory while Tru64 will put them in the object
++  # directory.
++  mkdir sub
++
++  am_cv_CC_dependencies_compiler_type=none
++  if test "$am_compiler_list" = ""; then
++     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++  fi
++  for depmode in $am_compiler_list; do
++    # Setup a source with many dependencies, because some compilers
++    # like to wrap large dependency lists on column 80 (with \), and
++    # we should not choose a depcomp mode which is confused by this.
++    #
++    # We need to recreate these files for each test, as the compiler may
++    # overwrite some of them when testing with obscure command lines.
++    # This happens at least with the AIX C compiler.
++    : > sub/conftest.c
++    for i in 1 2 3 4 5 6; do
++      echo '#include "conftst'$i'.h"' >> sub/conftest.c
++      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++      # Solaris 8's {/usr,}/bin/sh.
++      touch sub/conftst$i.h
++    done
++    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++    case $depmode in
++    nosideeffect)
++      # after this tag, mechanisms are not by side-effect, so they'll
++      # only be used when explicitly requested
++      if test "x$enable_dependency_tracking" = xyes; then
++	continue
++      else
++	break
++      fi
++      ;;
++    none) break ;;
++    esac
++    # We check with `-c' and `-o' for the sake of the "dashmstdout"
++    # mode.  It turns out that the SunPro C++ compiler does not properly
++    # handle `-M -o', and we need to detect this.
++    if depmode=$depmode \
++       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++         >/dev/null 2>conftest.err &&
++       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++      # icc doesn't choke on unknown options, it will just issue warnings
++      # or remarks (even with -Werror).  So we grep stderr for any message
++      # that says an option was ignored or not supported.
++      # When given -MP, icc 7.0 and 7.1 complain thusly:
++      #   icc: Command line warning: ignoring option '-M'; no argument required
++      # The diagnosis changed in icc 8.0:
++      #   icc: Command line remark: option '-MP' not supported
++      if (grep 'ignoring option' conftest.err ||
++          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++        am_cv_CC_dependencies_compiler_type=$depmode
++        break
++      fi
++    fi
++  done
++
++  cd ..
++  rm -rf conftest.dir
++else
++  am_cv_CC_dependencies_compiler_type=none
++fi
++
++fi
++echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
++
++
++
++if
++  test "x$enable_dependency_tracking" != xno \
++  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
++  am__fastdepCC_TRUE=
++  am__fastdepCC_FALSE='#'
++else
++  am__fastdepCC_TRUE='#'
++  am__fastdepCC_FALSE=
++fi
++
++
++echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
++if test "${lt_cv_path_SED+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  # Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for lt_ac_prog in sed gsed; do
++    for ac_exec_ext in '' $ac_executable_extensions; do
++      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
++        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
++      fi
++    done
++  done
++done
++lt_ac_max=0
++lt_ac_count=0
++# Add /usr/xpg4/bin/sed as it is typically found on Solaris
++# along with /bin/sed that truncates output.
++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
++  test ! -f $lt_ac_sed && continue
++  cat /dev/null > conftest.in
++  lt_ac_count=0
++  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
++  # Check for GNU sed and select it if it is found.
++  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
++    lt_cv_path_SED=$lt_ac_sed
++    break
++  fi
++  while true; do
++    cat conftest.in conftest.in >conftest.tmp
++    mv conftest.tmp conftest.in
++    cp conftest.in conftest.nl
++    echo >>conftest.nl
++    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
++    cmp -s conftest.out conftest.nl || break
++    # 10000 chars as input seems more than enough
++    test $lt_ac_count -gt 10 && break
++    lt_ac_count=`expr $lt_ac_count + 1`
++    if test $lt_ac_count -gt $lt_ac_max; then
++      lt_ac_max=$lt_ac_count
++      lt_cv_path_SED=$lt_ac_sed
++    fi
++  done
++done
++
++fi
++
++SED=$lt_cv_path_SED
++echo "$as_me:$LINENO: result: $SED" >&5
++echo "${ECHO_T}$SED" >&6
++
++echo "$as_me:$LINENO: checking for egrep" >&5
++echo $ECHO_N "checking for egrep... $ECHO_C" >&6
++if test "${ac_cv_prog_egrep+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
++    then ac_cv_prog_egrep='grep -E'
++    else ac_cv_prog_egrep='egrep'
++    fi
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
++echo "${ECHO_T}$ac_cv_prog_egrep" >&6
++ EGREP=$ac_cv_prog_egrep
++
++
+ 
+ # Check whether --with-gnu-ld or --without-gnu-ld was given.
+ if test "${with_gnu_ld+set}" = set; then
+@@ -2788,19 +3342,25 @@ else
+   with_gnu_ld=no
+ fi;
+ ac_prog=ld
+-if test "$ac_cv_c_compiler_gnu" = yes; then
++if test "$GCC" = yes; then
+   # Check if gcc -print-prog-name=ld gives a path.
+-  echo "$as_me:$LINENO: checking for ld used by GCC" >&5
+-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+-  case "$ac_prog" in
++  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
++  case $host in
++  *-*-mingw*)
++    # gcc leaves a trailing carriage return which upsets mingw
++    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++  *)
++    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++  esac
++  case $ac_prog in
+     # Accept absolute paths.
+-    [\\/]* | [A-Za-z]:[\\/]*)
++    [\\/]* | ?:[\\/]*)
+       re_direlt='/[^/][^/]*/\.\./'
+-      # Canonicalize the path of ld
+-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
++      # Canonicalize the pathname of ld
++      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+       while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
++	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+       done
+       test -z "$LD" && LD="$ac_prog"
+       ;;
+@@ -2820,32 +3380,36 @@ else
+   echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+ echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+ fi
+-if test "${ac_cv_path_LD+set}" = set; then
++if test "${lt_cv_path_LD+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -z "$LD"; then
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+   for ac_dir in $PATH; do
++    IFS="$lt_save_ifs"
+     test -z "$ac_dir" && ac_dir=.
+     if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+-      ac_cv_path_LD="$ac_dir/$ac_prog"
++      lt_cv_path_LD="$ac_dir/$ac_prog"
+       # Check to see if the program is GNU ld.  I'd rather use --version,
+-      # but apparently some GNU ld's only accept -v.
++      # but apparently some variants of GNU ld only accept -v.
+       # Break only if it was the GNU/non-GNU ld that we prefer.
+-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
++      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++      *GNU* | *'with BFD'*)
+ 	test "$with_gnu_ld" != no && break
+-      else
++	;;
++      *)
+ 	test "$with_gnu_ld" != yes && break
+-      fi
++	;;
++      esac
+     fi
+   done
+-  IFS="$ac_save_ifs"
++  IFS="$lt_save_ifs"
+ else
+-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
++  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ fi
+ fi
+ 
+-LD="$ac_cv_path_LD"
++LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+   echo "$as_me:$LINENO: result: $LD" >&5
+ echo "${ECHO_T}$LD" >&6
+@@ -2858,56 +3422,101 @@ echo "$as_me: error: no acceptable ld fo
+    { (exit 1); exit 1; }; }
+ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+ echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+-if test "${ac_cv_prog_gnu_ld+set}" = set; then
++if test "${lt_cv_prog_gnu_ld+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-  # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+-  ac_cv_prog_gnu_ld=yes
+-else
+-  ac_cv_prog_gnu_ld=no
+-fi
++  # I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++  lt_cv_prog_gnu_ld=yes
++  ;;
++*)
++  lt_cv_prog_gnu_ld=no
++  ;;
++esac
+ fi
+-echo "$as_me:$LINENO: result: $ac_cv_prog_gnu_ld" >&5
+-echo "${ECHO_T}$ac_cv_prog_gnu_ld" >&6
++echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
++with_gnu_ld=$lt_cv_prog_gnu_ld
+ 
+ 
++echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
++if test "${lt_cv_ld_reload_flag+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_ld_reload_flag='-r'
++fi
++echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
++reload_flag=$lt_cv_ld_reload_flag
++case $reload_flag in
++"" | " "*) ;;
++*) reload_flag=" $reload_flag" ;;
++esac
++reload_cmds='$LD$reload_flag -o $output$reload_objs'
++case $host_os in
++  darwin*)
++    if test "$GCC" = yes; then
++      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
++    else
++      reload_cmds='$LD$reload_flag -o $output$reload_objs'
++    fi
++    ;;
++esac
++
+ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+ echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+-if test "${ac_cv_path_NM+set}" = set; then
++if test "${lt_cv_path_NM+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+   if test -n "$NM"; then
+   # Let the user override the test.
+-  ac_cv_path_NM="$NM"
++  lt_cv_path_NM="$NM"
+ else
+-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+-    test -z "$ac_dir" && ac_dir=.
+-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+-      # Check to see if the nm accepts a BSD-compat flag.
+-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+-      #   nm: unknown option "B" ignored
+-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -B"
+-	break
+-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	ac_cv_path_NM="$ac_dir/nm -p"
+-	break
+-      else
+-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+-	continue # so that we can try to find one that supports BSD flags
++  lt_nm_to_check="${ac_tool_prefix}nm"
++  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
++    lt_nm_to_check="$lt_nm_to_check nm"
++  fi
++  for lt_tmp_nm in $lt_nm_to_check; do
++    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
++      IFS="$lt_save_ifs"
++      test -z "$ac_dir" && ac_dir=.
++      tmp_nm="$ac_dir/$lt_tmp_nm"
++      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
++	# Check to see if the nm accepts a BSD-compat flag.
++	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
++	#   nm: unknown option "B" ignored
++	# Tru64's nm complains that /dev/null is an invalid object file
++	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
++	*/dev/null* | *'Invalid file or object type'*)
++	  lt_cv_path_NM="$tmp_nm -B"
++	  break
++	  ;;
++	*)
++	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
++	  */dev/null*)
++	    lt_cv_path_NM="$tmp_nm -p"
++	    break
++	    ;;
++	  *)
++	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
++	    continue # so that we can try to find one that supports BSD flags
++	    ;;
++	  esac
++	  ;;
++	esac
+       fi
+-    fi
++    done
++    IFS="$lt_save_ifs"
+   done
+-  IFS="$ac_save_ifs"
+-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
++  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+ fi
+ fi
+-
+-NM="$ac_cv_path_NM"
+-echo "$as_me:$LINENO: result: $NM" >&5
+-echo "${ECHO_T}$NM" >&6
++echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
++echo "${ECHO_T}$lt_cv_path_NM" >&6
++NM="$lt_cv_path_NM"
+ 
+ echo "$as_me:$LINENO: checking whether ln -s works" >&5
+ echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+@@ -2920,20 +3529,199 @@ else
+ echo "${ECHO_T}no, using $LN_S" >&6
+ fi
+ 
++echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
++echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
++if test "${lt_cv_deplibs_check_method+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_file_magic_cmd='$MAGIC_CMD'
++lt_cv_file_magic_test_file=
++lt_cv_deplibs_check_method='unknown'
++# Need to set the preceding variable on all platforms that support
++# interlibrary dependencies.
++# 'none' -- dependencies not supported.
++# `unknown' -- same as none, but documents that we really don't know.
++# 'pass_all' -- all dependencies passed with no checks.
++# 'test_compile' -- check by making test program.
++# 'file_magic [[regex]]' -- check by looking for files in library path
++# which responds to the $file_magic_cmd with a given extended regex.
++# If you have `file' or equivalent on your system and you're not sure
++# whether `pass_all' will *always* work, you probably want this one.
++
++case $host_os in
++aix4* | aix5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
+ 
++beos*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
+ 
+-case "$target" in
+-NONE) lt_target="$host" ;;
+-*) lt_target="$target" ;;
++bsdi[45]*)
++  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
++  lt_cv_file_magic_cmd='/usr/bin/file -L'
++  lt_cv_file_magic_test_file=/shlib/libc.so
++  ;;
++
++cygwin*)
++  # func_win32_libid is a shell function defined in ltmain.sh
++  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
++  lt_cv_file_magic_cmd='func_win32_libid'
++  ;;
++
++mingw* | pw32*)
++  # Base MSYS/MinGW do not provide the 'file' command needed by
++  # func_win32_libid shell function, so use a weaker test based on 'objdump'.
++  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
++  lt_cv_file_magic_cmd='$OBJDUMP -f'
++  ;;
++
++darwin* | rhapsody*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++freebsd* | kfreebsd*-gnu | dragonfly*)
++  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
++    case $host_cpu in
++    i*86 )
++      # Not sure whether the presence of OpenBSD here was a mistake.
++      # Let's accept both of them until this is cleared up.
++      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
++      lt_cv_file_magic_cmd=/usr/bin/file
++      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++      ;;
++    esac
++  else
++    lt_cv_deplibs_check_method=pass_all
++  fi
++  ;;
++
++gnu*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++hpux10.20* | hpux11*)
++  lt_cv_file_magic_cmd=/usr/bin/file
++  case $host_cpu in
++  ia64*)
++    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
++    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
++    ;;
++  hppa*64*)
++    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
++    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
++    ;;
++  *)
++    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
++    lt_cv_file_magic_test_file=/usr/lib/libc.sl
++    ;;
++  esac
++  ;;
++
++interix3*)
++  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
++  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $LD in
++  *-32|*"-32 ") libmagic=32-bit;;
++  *-n32|*"-n32 ") libmagic=N32;;
++  *-64|*"-64 ") libmagic=64-bit;;
++  *) libmagic=never-match;;
++  esac
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
++  fi
++  ;;
++
++newos6*)
++  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
++  lt_cv_file_magic_cmd=/usr/bin/file
++  lt_cv_file_magic_test_file=/usr/lib/libnls.so
++  ;;
++
++nto-qnx*)
++  lt_cv_deplibs_check_method=unknown
++  ;;
++
++openbsd*)
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
++  else
++    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
++  fi
++  ;;
++
++osf3* | osf4* | osf5*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++solaris*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
++
++sysv4 | sysv4.3*)
++  case $host_vendor in
++  motorola)
++    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
++    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
++    ;;
++  ncr)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  sequent)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
++    ;;
++  sni)
++    lt_cv_file_magic_cmd='/bin/file'
++    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
++    lt_cv_file_magic_test_file=/lib/libc.so
++    ;;
++  siemens)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  pc)
++    lt_cv_deplibs_check_method=pass_all
++    ;;
++  esac
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  lt_cv_deplibs_check_method=pass_all
++  ;;
+ esac
+ 
+-# Check for any special flags to pass to ltconfig.
+-libtool_flags="--cache-file=$cache_file"
+-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+-test "$ac_cv_c_compiler_gnu" = yes && libtool_flags="$libtool_flags --with-gcc"
+-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
++fi
++echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
++file_magic_cmd=$lt_cv_file_magic_cmd
++deplibs_check_method=$lt_cv_deplibs_check_method
++test -z "$deplibs_check_method" && deplibs_check_method=unknown
++
++
++
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
+ 
+ 
+ # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+@@ -2941,198 +3729,15171 @@ if test "${enable_libtool_lock+set}" = s
+   enableval="$enable_libtool_lock"
+ 
+ fi;
+-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
+-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+ 
+ # Some flags need to be propagated to the compiler or linker for good
+ # libtool support.
+-case "$lt_target" in
++case $host in
++ia64-*-hpux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; then
++    case `/usr/bin/file conftest.$ac_objext` in
++    *ELF-32*)
++      HPUX_IA64_MODE="32"
++      ;;
++    *ELF-64*)
++      HPUX_IA64_MODE="64"
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
+ *-*-irix6*)
+   # Find out which ABI we are using.
+-  echo '#line 2952 "configure"' > conftest.$ac_ext
++  echo '#line 3758 "configure"' > conftest.$ac_ext
+   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+   (eval $ac_compile) 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }; then
+-    case "`/usr/bin/file conftest.o`" in
++   if test "$lt_cv_prog_gnu_ld" = yes; then
++    case `/usr/bin/file conftest.$ac_objext` in
+     *32-bit*)
+-      LD="${LD-ld} -32"
++      LD="${LD-ld} -melf32bsmip"
+       ;;
+     *N32*)
+-      LD="${LD-ld} -n32"
++      LD="${LD-ld} -melf32bmipn32"
+       ;;
+     *64-bit*)
+-      LD="${LD-ld} -64"
++      LD="${LD-ld} -melf64bmip"
+       ;;
+     esac
+-  fi
+-  rm -rf conftest*
+-  ;;
++   else
++    case `/usr/bin/file conftest.$ac_objext` in
++    *32-bit*)
++      LD="${LD-ld} -32"
++      ;;
++    *N32*)
++      LD="${LD-ld} -n32"
++      ;;
++    *64-bit*)
++      LD="${LD-ld} -64"
++      ;;
++    esac
++   fi
++  fi
++  rm -rf conftest*
++  ;;
++
++x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; then
++    case `/usr/bin/file conftest.o` in
++    *32-bit*)
++      case $host in
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_i386"
++          ;;
++        ppc64-*linux*|powerpc64-*linux*)
++          LD="${LD-ld} -m elf32ppclinux"
++          ;;
++        s390x-*linux*)
++          LD="${LD-ld} -m elf_s390"
++          ;;
++        sparc64-*linux*)
++          LD="${LD-ld} -m elf32_sparc"
++          ;;
++      esac
++      ;;
++    *64-bit*)
++      case $host in
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_x86_64"
++          ;;
++        ppc*-*linux*|powerpc*-*linux*)
++          LD="${LD-ld} -m elf64ppc"
++          ;;
++        s390*-*linux*)
++          LD="${LD-ld} -m elf64_s390"
++          ;;
++        sparc*-*linux*)
++          LD="${LD-ld} -m elf64_sparc"
++          ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-sco3.2v5*)
++  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++  SAVE_CFLAGS="$CFLAGS"
++  CFLAGS="$CFLAGS -belf"
++  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
++if test "${lt_cv_cc_needs_belf+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++     cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  lt_cv_cc_needs_belf=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++lt_cv_cc_needs_belf=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++     ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
++  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++    CFLAGS="$SAVE_CFLAGS"
++  fi
++  ;;
++sparc*-*solaris*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; then
++    case `/usr/bin/file conftest.o` in
++    *64-bit*)
++      case $lt_cv_prog_gnu_ld in
++      yes*) LD="${LD-ld} -m elf64_sparc" ;;
++      *)    LD="${LD-ld} -64" ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-cygwin* | *-*-mingw* | *-*-pw32*)
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
++set dummy ${ac_tool_prefix}dlltool; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_DLLTOOL+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$DLLTOOL"; then
++  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++DLLTOOL=$ac_cv_prog_DLLTOOL
++if test -n "$DLLTOOL"; then
++  echo "$as_me:$LINENO: result: $DLLTOOL" >&5
++echo "${ECHO_T}$DLLTOOL" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_DLLTOOL"; then
++  ac_ct_DLLTOOL=$DLLTOOL
++  # Extract the first word of "dlltool", so it can be a program name with args.
++set dummy dlltool; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_DLLTOOL"; then
++  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false"
++fi
++fi
++ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
++if test -n "$ac_ct_DLLTOOL"; then
++  echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
++echo "${ECHO_T}$ac_ct_DLLTOOL" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  DLLTOOL=$ac_ct_DLLTOOL
++else
++  DLLTOOL="$ac_cv_prog_DLLTOOL"
++fi
++
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
++set dummy ${ac_tool_prefix}as; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_AS+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$AS"; then
++  ac_cv_prog_AS="$AS" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_AS="${ac_tool_prefix}as"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++AS=$ac_cv_prog_AS
++if test -n "$AS"; then
++  echo "$as_me:$LINENO: result: $AS" >&5
++echo "${ECHO_T}$AS" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_AS"; then
++  ac_ct_AS=$AS
++  # Extract the first word of "as", so it can be a program name with args.
++set dummy as; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_AS"; then
++  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_AS="as"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false"
++fi
++fi
++ac_ct_AS=$ac_cv_prog_ac_ct_AS
++if test -n "$ac_ct_AS"; then
++  echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
++echo "${ECHO_T}$ac_ct_AS" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  AS=$ac_ct_AS
++else
++  AS="$ac_cv_prog_AS"
++fi
++
++  if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
++set dummy ${ac_tool_prefix}objdump; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_OBJDUMP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$OBJDUMP"; then
++  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++OBJDUMP=$ac_cv_prog_OBJDUMP
++if test -n "$OBJDUMP"; then
++  echo "$as_me:$LINENO: result: $OBJDUMP" >&5
++echo "${ECHO_T}$OBJDUMP" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_OBJDUMP"; then
++  ac_ct_OBJDUMP=$OBJDUMP
++  # Extract the first word of "objdump", so it can be a program name with args.
++set dummy objdump; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_OBJDUMP"; then
++  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_OBJDUMP="objdump"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
++fi
++fi
++ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
++if test -n "$ac_ct_OBJDUMP"; then
++  echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
++echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  OBJDUMP=$ac_ct_OBJDUMP
++else
++  OBJDUMP="$ac_cv_prog_OBJDUMP"
++fi
++
++  ;;
++
++esac
++
++need_locks="$enable_libtool_lock"
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
++# On Suns, sometimes $CPP names a directory.
++if test -n "$CPP" && test -d "$CPP"; then
++  CPP=
++fi
++if test -z "$CPP"; then
++  if test "${ac_cv_prog_CPP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++      # Double quotes because CPP needs to be expanded
++    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
++    do
++      ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++  # Use a header file that comes with gcc, so configuring glibc
++  # with a fresh cross-compiler works.
++  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++  # <limits.h> exists even on freestanding compilers.
++  # On the NeXT, cc -E runs the code through the compiler's parser,
++  # not just through cpp. "Syntax error" is here to catch this case.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++		     Syntax error
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_c_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  :
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.$ac_ext
++
++  # OK, works on sane cases.  Now check whether non-existent headers
++  # can be detected and how.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_c_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  # Broken: success on invalid input.
++continue
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++  break
++fi
++
++    done
++    ac_cv_prog_CPP=$CPP
++
++fi
++  CPP=$ac_cv_prog_CPP
++else
++  ac_cv_prog_CPP=$CPP
++fi
++echo "$as_me:$LINENO: result: $CPP" >&5
++echo "${ECHO_T}$CPP" >&6
++ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++  # Use a header file that comes with gcc, so configuring glibc
++  # with a fresh cross-compiler works.
++  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++  # <limits.h> exists even on freestanding compilers.
++  # On the NeXT, cc -E runs the code through the compiler's parser,
++  # not just through cpp. "Syntax error" is here to catch this case.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++		     Syntax error
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_c_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  :
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.$ac_ext
++
++  # OK, works on sane cases.  Now check whether non-existent headers
++  # can be detected and how.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_c_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  # Broken: success on invalid input.
++continue
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++  :
++else
++  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." >&5
++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++echo "$as_me:$LINENO: checking for ANSI C header files" >&5
++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
++if test "${ac_cv_header_stdc+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <stdlib.h>
++#include <stdarg.h>
++#include <string.h>
++#include <float.h>
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_header_stdc=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_header_stdc=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++
++if test $ac_cv_header_stdc = yes; then
++  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <string.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++  $EGREP "memchr" >/dev/null 2>&1; then
++  :
++else
++  ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <stdlib.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++  $EGREP "free" >/dev/null 2>&1; then
++  :
++else
++  ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
++  if test "$cross_compiling" = yes; then
++  :
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <ctype.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++		   (('a' <= (c) && (c) <= 'i') \
++		     || ('j' <= (c) && (c) <= 'r') \
++		     || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
++
++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
++int
++main ()
++{
++  int i;
++  for (i = 0; i < 256; i++)
++    if (XOR (islower (i), ISLOWER (i))
++	|| toupper (i) != TOUPPER (i))
++      exit(2);
++  exit (0);
++}
++_ACEOF
++rm -f conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  :
++else
++  echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++( exit $ac_status )
++ac_cv_header_stdc=no
++fi
++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++fi
++fi
++fi
++echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
++echo "${ECHO_T}$ac_cv_header_stdc" >&6
++if test $ac_cv_header_stdc = yes; then
++
++cat >>confdefs.h <<\_ACEOF
++#define STDC_HEADERS 1
++_ACEOF
++
++fi
++
++# On IRIX 5.3, sys/types and inttypes.h are conflicting.
++
++
++
++
++
++
++
++
++
++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
++		  inttypes.h stdint.h unistd.h
++do
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++$ac_includes_default
++
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  eval "$as_ac_Header=yes"
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++eval "$as_ac_Header=no"
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++  cat >>confdefs.h <<_ACEOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++
++
++for ac_header in dlfcn.h
++do
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++  echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++else
++  # Is the header compilable?
++echo "$as_me:$LINENO: checking $ac_header usability" >&5
++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++$ac_includes_default
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_header_compiler=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_header_compiler=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++echo "${ECHO_T}$ac_header_compiler" >&6
++
++# Is the header present?
++echo "$as_me:$LINENO: checking $ac_header presence" >&5
++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <$ac_header>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_c_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  ac_header_preproc=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  ac_header_preproc=no
++fi
++rm -f conftest.err conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++echo "${ECHO_T}$ac_header_preproc" >&6
++
++# So?  What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
++  yes:no: )
++    { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
++    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
++    ac_header_preproc=yes
++    ;;
++  no:yes:* )
++    { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
++    { echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
++    { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
++    { echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
++echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
++    { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++    { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
++    (
++      cat <<\_ASBOX
++## ------------------------------------------ ##
++## Report this to the AC_PACKAGE_NAME lists.  ##
++## ------------------------------------------ ##
++_ASBOX
++    ) |
++      sed "s/^/$as_me: WARNING:     /" >&2
++    ;;
++esac
++echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  eval "$as_ac_Header=\$ac_header_preproc"
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++
++fi
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++  cat >>confdefs.h <<_ACEOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++ac_ext=cc
++ac_cpp='$CXXCPP $CPPFLAGS'
++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
++  do
++    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CXX+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$CXX"; then
++  ac_cv_prog_CXX="$CXX" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++CXX=$ac_cv_prog_CXX
++if test -n "$CXX"; then
++  echo "$as_me:$LINENO: result: $CXX" >&5
++echo "${ECHO_T}$CXX" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++    test -n "$CXX" && break
++  done
++fi
++if test -z "$CXX"; then
++  ac_ct_CXX=$CXX
++  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
++do
++  # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_CXX"; then
++  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_CXX="$ac_prog"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
++if test -n "$ac_ct_CXX"; then
++  echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
++echo "${ECHO_T}$ac_ct_CXX" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  test -n "$ac_ct_CXX" && break
++done
++test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
++
++  CXX=$ac_ct_CXX
++fi
++
++
++# Provide some information about the compiler.
++echo "$as_me:$LINENO:" \
++     "checking for C++ compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
++  (eval $ac_compiler --version </dev/null >&5) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
++  (eval $ac_compiler -v </dev/null >&5) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
++  (eval $ac_compiler -V </dev/null >&5) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++
++echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
++if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++#ifndef __GNUC__
++       choke me
++#endif
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_compiler_gnu=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_compiler_gnu=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
++GXX=`test $ac_compiler_gnu = yes && echo yes`
++ac_test_CXXFLAGS=${CXXFLAGS+set}
++ac_save_CXXFLAGS=$CXXFLAGS
++CXXFLAGS="-g"
++echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
++if test "${ac_cv_prog_cxx_g+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_prog_cxx_g=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_prog_cxx_g=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
++if test "$ac_test_CXXFLAGS" = set; then
++  CXXFLAGS=$ac_save_CXXFLAGS
++elif test $ac_cv_prog_cxx_g = yes; then
++  if test "$GXX" = yes; then
++    CXXFLAGS="-g -O2"
++  else
++    CXXFLAGS="-g"
++  fi
++else
++  if test "$GXX" = yes; then
++    CXXFLAGS="-O2"
++  else
++    CXXFLAGS=
++  fi
++fi
++for ac_declaration in \
++   '' \
++   'extern "C" void std::exit (int) throw (); using std::exit;' \
++   'extern "C" void std::exit (int); using std::exit;' \
++   'extern "C" void exit (int) throw ();' \
++   'extern "C" void exit (int);' \
++   'void exit (int);'
++do
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++$ac_declaration
++#include <stdlib.h>
++int
++main ()
++{
++exit (42);
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  :
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++continue
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++$ac_declaration
++int
++main ()
++{
++exit (42);
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  break
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++done
++rm -f conftest*
++if test -n "$ac_declaration"; then
++  echo '#ifdef __cplusplus' >>confdefs.h
++  echo $ac_declaration      >>confdefs.h
++  echo '#endif'             >>confdefs.h
++fi
++
++ac_ext=cc
++ac_cpp='$CXXCPP $CPPFLAGS'
++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
++
++depcc="$CXX"  am_compiler_list=
++
++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
++if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++  # We make a subdir and do the tests there.  Otherwise we can end up
++  # making bogus files that we don't know about and never remove.  For
++  # instance it was reported that on HP-UX the gcc test will end up
++  # making a dummy file named `D' -- because `-MD' means `put the output
++  # in D'.
++  mkdir conftest.dir
++  # Copy depcomp to subdir because otherwise we won't find it if we're
++  # using a relative directory.
++  cp "$am_depcomp" conftest.dir
++  cd conftest.dir
++  # We will build objects and dependencies in a subdirectory because
++  # it helps to detect inapplicable dependency modes.  For instance
++  # both Tru64's cc and ICC support -MD to output dependencies as a
++  # side effect of compilation, but ICC will put the dependencies in
++  # the current directory while Tru64 will put them in the object
++  # directory.
++  mkdir sub
++
++  am_cv_CXX_dependencies_compiler_type=none
++  if test "$am_compiler_list" = ""; then
++     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++  fi
++  for depmode in $am_compiler_list; do
++    # Setup a source with many dependencies, because some compilers
++    # like to wrap large dependency lists on column 80 (with \), and
++    # we should not choose a depcomp mode which is confused by this.
++    #
++    # We need to recreate these files for each test, as the compiler may
++    # overwrite some of them when testing with obscure command lines.
++    # This happens at least with the AIX C compiler.
++    : > sub/conftest.c
++    for i in 1 2 3 4 5 6; do
++      echo '#include "conftst'$i'.h"' >> sub/conftest.c
++      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++      # Solaris 8's {/usr,}/bin/sh.
++      touch sub/conftst$i.h
++    done
++    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++    case $depmode in
++    nosideeffect)
++      # after this tag, mechanisms are not by side-effect, so they'll
++      # only be used when explicitly requested
++      if test "x$enable_dependency_tracking" = xyes; then
++	continue
++      else
++	break
++      fi
++      ;;
++    none) break ;;
++    esac
++    # We check with `-c' and `-o' for the sake of the "dashmstdout"
++    # mode.  It turns out that the SunPro C++ compiler does not properly
++    # handle `-M -o', and we need to detect this.
++    if depmode=$depmode \
++       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++         >/dev/null 2>conftest.err &&
++       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++      # icc doesn't choke on unknown options, it will just issue warnings
++      # or remarks (even with -Werror).  So we grep stderr for any message
++      # that says an option was ignored or not supported.
++      # When given -MP, icc 7.0 and 7.1 complain thusly:
++      #   icc: Command line warning: ignoring option '-M'; no argument required
++      # The diagnosis changed in icc 8.0:
++      #   icc: Command line remark: option '-MP' not supported
++      if (grep 'ignoring option' conftest.err ||
++          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++        am_cv_CXX_dependencies_compiler_type=$depmode
++        break
++      fi
++    fi
++  done
++
++  cd ..
++  rm -rf conftest.dir
++else
++  am_cv_CXX_dependencies_compiler_type=none
++fi
++
++fi
++echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
++CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
++
++
++
++if
++  test "x$enable_dependency_tracking" != xno \
++  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
++  am__fastdepCXX_TRUE=
++  am__fastdepCXX_FALSE='#'
++else
++  am__fastdepCXX_TRUE='#'
++  am__fastdepCXX_FALSE=
++fi
++
++
++
++
++if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++    (test "X$CXX" != "Xg++"))) ; then
++  ac_ext=cc
++ac_cpp='$CXXCPP $CPPFLAGS'
++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
++echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
++if test -z "$CXXCPP"; then
++  if test "${ac_cv_prog_CXXCPP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++      # Double quotes because CXXCPP needs to be expanded
++    for CXXCPP in "$CXX -E" "/lib/cpp"
++    do
++      ac_preproc_ok=false
++for ac_cxx_preproc_warn_flag in '' yes
++do
++  # Use a header file that comes with gcc, so configuring glibc
++  # with a fresh cross-compiler works.
++  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++  # <limits.h> exists even on freestanding compilers.
++  # On the NeXT, cc -E runs the code through the compiler's parser,
++  # not just through cpp. "Syntax error" is here to catch this case.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++		     Syntax error
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_cxx_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  :
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.$ac_ext
++
++  # OK, works on sane cases.  Now check whether non-existent headers
++  # can be detected and how.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_cxx_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  # Broken: success on invalid input.
++continue
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++  break
++fi
++
++    done
++    ac_cv_prog_CXXCPP=$CXXCPP
++
++fi
++  CXXCPP=$ac_cv_prog_CXXCPP
++else
++  ac_cv_prog_CXXCPP=$CXXCPP
++fi
++echo "$as_me:$LINENO: result: $CXXCPP" >&5
++echo "${ECHO_T}$CXXCPP" >&6
++ac_preproc_ok=false
++for ac_cxx_preproc_warn_flag in '' yes
++do
++  # Use a header file that comes with gcc, so configuring glibc
++  # with a fresh cross-compiler works.
++  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++  # <limits.h> exists even on freestanding compilers.
++  # On the NeXT, cc -E runs the code through the compiler's parser,
++  # not just through cpp. "Syntax error" is here to catch this case.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++		     Syntax error
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_cxx_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  :
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.$ac_ext
++
++  # OK, works on sane cases.  Now check whether non-existent headers
++  # can be detected and how.
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } >/dev/null; then
++  if test -s conftest.err; then
++    ac_cpp_err=$ac_cxx_preproc_warn_flag
++    ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
++  else
++    ac_cpp_err=
++  fi
++else
++  ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++  # Broken: success on invalid input.
++continue
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++  # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.$ac_ext
++
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++  :
++else
++  { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
++See \`config.log' for more details." >&5
++echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
++See \`config.log' for more details." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++
++ac_ext=cc
++ac_cpp='$CXXCPP $CPPFLAGS'
++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
++
++fi
++
++
++ac_ext=f
++ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
++ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_f77_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
++  do
++    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_F77+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$F77"; then
++  ac_cv_prog_F77="$F77" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++F77=$ac_cv_prog_F77
++if test -n "$F77"; then
++  echo "$as_me:$LINENO: result: $F77" >&5
++echo "${ECHO_T}$F77" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++    test -n "$F77" && break
++  done
++fi
++if test -z "$F77"; then
++  ac_ct_F77=$F77
++  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
++do
++  # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_F77"; then
++  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_F77="$ac_prog"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++ac_ct_F77=$ac_cv_prog_ac_ct_F77
++if test -n "$ac_ct_F77"; then
++  echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
++echo "${ECHO_T}$ac_ct_F77" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  test -n "$ac_ct_F77" && break
++done
++
++  F77=$ac_ct_F77
++fi
++
++
++# Provide some information about the compiler.
++echo "$as_me:5591:" \
++     "checking for Fortran 77 compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
++  (eval $ac_compiler --version </dev/null >&5) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
++  (eval $ac_compiler -v </dev/null >&5) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
++  (eval $ac_compiler -V </dev/null >&5) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++rm -f a.out
++
++# If we don't use `.F' as extension, the preprocessor is not run on the
++# input file.  (Note that this only needs to work for GNU compilers.)
++ac_save_ext=$ac_ext
++ac_ext=F
++echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
++if test "${ac_cv_f77_compiler_gnu+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++      program main
++#ifndef __GNUC__
++       choke me
++#endif
++
++      end
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_compiler_gnu=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_compiler_gnu=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++ac_cv_f77_compiler_gnu=$ac_compiler_gnu
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
++ac_ext=$ac_save_ext
++ac_test_FFLAGS=${FFLAGS+set}
++ac_save_FFLAGS=$FFLAGS
++FFLAGS=
++echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
++if test "${ac_cv_prog_f77_g+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  FFLAGS=-g
++cat >conftest.$ac_ext <<_ACEOF
++      program main
++
++      end
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest.$ac_objext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_prog_f77_g=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_prog_f77_g=no
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
++if test "$ac_test_FFLAGS" = set; then
++  FFLAGS=$ac_save_FFLAGS
++elif test $ac_cv_prog_f77_g = yes; then
++  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
++    FFLAGS="-g -O2"
++  else
++    FFLAGS="-g"
++  fi
++else
++  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
++    FFLAGS="-O2"
++  else
++    FFLAGS=
++  fi
++fi
++
++G77=`test $ac_compiler_gnu = yes && echo yes`
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++
++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
++
++# find the maximum length of command line arguments
++echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
++if test "${lt_cv_sys_max_cmd_len+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++    i=0
++  teststring="ABCD"
++
++  case $build_os in
++  msdosdjgpp*)
++    # On DJGPP, this test can blow up pretty badly due to problems in libc
++    # (any single argument exceeding 2000 bytes causes a buffer overrun
++    # during glob expansion).  Even if it were fixed, the result of this
++    # check would be larger than it should be.
++    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
++    ;;
++
++  gnu*)
++    # Under GNU Hurd, this test is not required because there is
++    # no limit to the length of command line arguments.
++    # Libtool will interpret -1 as no limit whatsoever
++    lt_cv_sys_max_cmd_len=-1;
++    ;;
++
++  cygwin* | mingw*)
++    # On Win9x/ME, this test blows up -- it succeeds, but takes
++    # about 5 minutes as the teststring grows exponentially.
++    # Worse, since 9x/ME are not pre-emptively multitasking,
++    # you end up with a "frozen" computer, even though with patience
++    # the test eventually succeeds (with a max line length of 256k).
++    # Instead, let's just punt: use the minimum linelength reported by
++    # all of the supported platforms: 8192 (on NT/2K/XP).
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  amigaos*)
++    # On AmigaOS with pdksh, this test takes hours, literally.
++    # So we just punt and use a minimum line length of 8192.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++    # This has been around since 386BSD, at least.  Likely further.
++    if test -x /sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++    elif test -x /usr/sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++    else
++      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
++    fi
++    # And add a safety zone
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    ;;
++
++  interix*)
++    # We know the value 262144 and hardcode it with a safety zone (like BSD)
++    lt_cv_sys_max_cmd_len=196608
++    ;;
++
++  osf*)
++    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++    # nice to cause kernel panics so lets avoid the loop below.
++    # First set a reasonable default.
++    lt_cv_sys_max_cmd_len=16384
++    #
++    if test -x /sbin/sysconfig; then
++      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++        *1*) lt_cv_sys_max_cmd_len=-1 ;;
++      esac
++    fi
++    ;;
++  sco3.2v5*)
++    lt_cv_sys_max_cmd_len=102400
++    ;;
++  sysv5* | sco5v6* | sysv4.2uw2*)
++    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++    if test -n "$kargmax"; then
++      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
++    else
++      lt_cv_sys_max_cmd_len=32768
++    fi
++    ;;
++  *)
++    # If test is not a shell built-in, we'll probably end up computing a
++    # maximum length that is only half of the actual maximum length, but
++    # we can't tell.
++    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
++	       = "XX$teststring") >/dev/null 2>&1 &&
++	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
++	    lt_cv_sys_max_cmd_len=$new_result &&
++	    test $i != 17 # 1/2 MB should be enough
++    do
++      i=`expr $i + 1`
++      teststring=$teststring$teststring
++    done
++    teststring=
++    # Add a significant safety factor because C++ compilers can tack on massive
++    # amounts of additional arguments before passing them to the linker.
++    # It appears as though 1/2 is a usable value.
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++    ;;
++  esac
++
++fi
++
++if test -n $lt_cv_sys_max_cmd_len ; then
++  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
++else
++  echo "$as_me:$LINENO: result: none" >&5
++echo "${ECHO_T}none" >&6
++fi
++
++
++
++
++# Check for command to grab the raw symbol name followed by C symbol from nm.
++echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++
++# These are sane defaults that work on at least a few old systems.
++# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
++
++# Character class describing NM global symbol codes.
++symcode='[BCDEGRST]'
++
++# Regexp to match symbols that can be accessed directly from C.
++sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
++
++# Transform an extracted symbol line into a proper C declaration
++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
++
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
++
++# Define system-specific variables.
++case $host_os in
++aix*)
++  symcode='[BCDT]'
++  ;;
++cygwin* | mingw* | pw32*)
++  symcode='[ABCDGISTW]'
++  ;;
++hpux*) # Its linker distinguishes data from code symbols
++  if test "$host_cpu" = ia64; then
++    symcode='[ABCDEGRST]'
++  fi
++  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
++  ;;
++linux*)
++  if test "$host_cpu" = ia64; then
++    symcode='[ABCDGIRSTW]'
++    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
++  fi
++  ;;
++irix* | nonstopux*)
++  symcode='[BCDEGRST]'
++  ;;
++osf*)
++  symcode='[BCDEGQRST]'
++  ;;
++solaris*)
++  symcode='[BDRT]'
++  ;;
++sco3.2v5*)
++  symcode='[DT]'
++  ;;
++sysv4.2uw2*)
++  symcode='[DT]'
++  ;;
++sysv5* | sco5v6* | unixware* | OpenUNIX*)
++  symcode='[ABDT]'
++  ;;
++sysv4)
++  symcode='[DFNSTU]'
++  ;;
++esac
++
++# Handle CRLF in mingw tool chain
++opt_cr=
++case $build_os in
++mingw*)
++  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
++  ;;
++esac
++
++# If we're using GNU nm, then use its standard symbol codes.
++case `$NM -V 2>&1` in
++*GNU* | *'with BFD'*)
++  symcode='[ABCDGIRSTW]' ;;
++esac
++
++# Try without a prefix undercore, then with it.
++for ac_symprfx in "" "_"; do
++
++  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
++  symxfrm="\\1 $ac_symprfx\\2 \\2"
++
++  # Write the raw and C identifiers.
++  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
++
++  # Check to see that the pipe works correctly.
++  pipe_works=no
++
++  rm -f conftest*
++  cat > conftest.$ac_ext <<EOF
++#ifdef __cplusplus
++extern "C" {
++#endif
++char nm_test_var;
++void nm_test_func(){}
++#ifdef __cplusplus
++}
++#endif
++int main(){nm_test_var='a';nm_test_func();return(0);}
++EOF
++
++  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; then
++    # Now try to grab the symbols.
++    nlist=conftest.nm
++    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
++  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && test -s "$nlist"; then
++      # Try sorting and uniquifying the output.
++      if sort "$nlist" | uniq > "$nlist"T; then
++	mv -f "$nlist"T "$nlist"
++      else
++	rm -f "$nlist"T
++      fi
++
++      # Make sure that we snagged all the symbols we need.
++      if grep ' nm_test_var$' "$nlist" >/dev/null; then
++	if grep ' nm_test_func$' "$nlist" >/dev/null; then
++	  cat <<EOF > conftest.$ac_ext
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++EOF
++	  # Now generate the symbol file.
++	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
++
++	  cat <<EOF >> conftest.$ac_ext
++#if defined (__STDC__) && __STDC__
++# define lt_ptr_t void *
++#else
++# define lt_ptr_t char *
++# define const
++#endif
++
++/* The mapping between symbol names and symbols. */
++const struct {
++  const char *name;
++  lt_ptr_t address;
++}
++lt_preloaded_symbols[] =
++{
++EOF
++	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
++	  cat <<\EOF >> conftest.$ac_ext
++  {0, (lt_ptr_t) 0}
++};
++
++#ifdef __cplusplus
++}
++#endif
++EOF
++	  # Now try linking the two files.
++	  mv conftest.$ac_objext conftstm.$ac_objext
++	  lt_save_LIBS="$LIBS"
++	  lt_save_CFLAGS="$CFLAGS"
++	  LIBS="conftstm.$ac_objext"
++	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
++	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && test -s conftest${ac_exeext}; then
++	    pipe_works=yes
++	  fi
++	  LIBS="$lt_save_LIBS"
++	  CFLAGS="$lt_save_CFLAGS"
++	else
++	  echo "cannot find nm_test_func in $nlist" >&5
++	fi
++      else
++	echo "cannot find nm_test_var in $nlist" >&5
++      fi
++    else
++      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
++    fi
++  else
++    echo "$progname: failed program was:" >&5
++    cat conftest.$ac_ext >&5
++  fi
++  rm -f conftest* conftst*
++
++  # Do not use the global_symbol_pipe unless it works.
++  if test "$pipe_works" = yes; then
++    break
++  else
++    lt_cv_sys_global_symbol_pipe=
++  fi
++done
++
++fi
++
++if test -z "$lt_cv_sys_global_symbol_pipe"; then
++  lt_cv_sys_global_symbol_to_cdecl=
++fi
++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
++  echo "$as_me:$LINENO: result: failed" >&5
++echo "${ECHO_T}failed" >&6
++else
++  echo "$as_me:$LINENO: result: ok" >&5
++echo "${ECHO_T}ok" >&6
++fi
++
++echo "$as_me:$LINENO: checking for objdir" >&5
++echo $ECHO_N "checking for objdir... $ECHO_C" >&6
++if test "${lt_cv_objdir+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++  lt_cv_objdir=.libs
++else
++  # MS-DOS does not allow filenames that begin with a dot.
++  lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null
++fi
++echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
++echo "${ECHO_T}$lt_cv_objdir" >&6
++objdir=$lt_cv_objdir
++
++
++
++
++
++case $host_os in
++aix3*)
++  # AIX sometimes has problems with the GCC collect2 program.  For some
++  # reason, if we set the COLLECT_NAMES environment variable, the problems
++  # vanish in a puff of smoke.
++  if test "X${COLLECT_NAMES+set}" != Xset; then
++    COLLECT_NAMES=
++    export COLLECT_NAMES
++  fi
++  ;;
++esac
++
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
++
++# Same as above, but do not quote variable references.
++double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++
++# Constants:
++rm="rm -f"
++
++# Global variables:
++default_ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++ltmain="$ac_aux_dir/ltmain.sh"
++ofile="$default_ofile"
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ar; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_AR+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$AR"; then
++  ac_cv_prog_AR="$AR" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_AR="${ac_tool_prefix}ar"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++AR=$ac_cv_prog_AR
++if test -n "$AR"; then
++  echo "$as_me:$LINENO: result: $AR" >&5
++echo "${ECHO_T}$AR" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_AR"; then
++  ac_ct_AR=$AR
++  # Extract the first word of "ar", so it can be a program name with args.
++set dummy ar; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_AR"; then
++  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_AR="ar"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
++fi
++fi
++ac_ct_AR=$ac_cv_prog_ac_ct_AR
++if test -n "$ac_ct_AR"; then
++  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
++echo "${ECHO_T}$ac_ct_AR" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  AR=$ac_ct_AR
++else
++  AR="$ac_cv_prog_AR"
++fi
++
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++set dummy ${ac_tool_prefix}ranlib; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_RANLIB+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$RANLIB"; then
++  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++RANLIB=$ac_cv_prog_RANLIB
++if test -n "$RANLIB"; then
++  echo "$as_me:$LINENO: result: $RANLIB" >&5
++echo "${ECHO_T}$RANLIB" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_RANLIB"; then
++  ac_ct_RANLIB=$RANLIB
++  # Extract the first word of "ranlib", so it can be a program name with args.
++set dummy ranlib; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_RANLIB"; then
++  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_RANLIB="ranlib"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
++fi
++fi
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
++echo "${ECHO_T}$ac_ct_RANLIB" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  RANLIB=$ac_ct_RANLIB
++else
++  RANLIB="$ac_cv_prog_RANLIB"
++fi
++
++if test -n "$ac_tool_prefix"; then
++  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++set dummy ${ac_tool_prefix}strip; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_STRIP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$STRIP"; then
++  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++fi
++fi
++STRIP=$ac_cv_prog_STRIP
++if test -n "$STRIP"; then
++  echo "$as_me:$LINENO: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_STRIP"; then
++  ac_ct_STRIP=$STRIP
++  # Extract the first word of "strip", so it can be a program name with args.
++set dummy strip; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -n "$ac_ct_STRIP"; then
++  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++  IFS=$as_save_IFS
++  test -z "$as_dir" && as_dir=.
++  for ac_exec_ext in '' $ac_executable_extensions; do
++  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++    ac_cv_prog_ac_ct_STRIP="strip"
++    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++    break 2
++  fi
++done
++done
++
++  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
++fi
++fi
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  STRIP=$ac_ct_STRIP
++else
++  STRIP="$ac_cv_prog_STRIP"
++fi
++
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++test -z "$AS" && AS=as
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++test -z "$LD" && LD=ld
++test -z "$LN_S" && LN_S="ln -s"
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++test -z "$NM" && NM=nm
++test -z "$SED" && SED=sed
++test -z "$OBJDUMP" && OBJDUMP=objdump
++test -z "$RANLIB" && RANLIB=:
++test -z "$STRIP" && STRIP=:
++test -z "$ac_objext" && ac_objext=o
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++  case $host_os in
++  openbsd*)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++    ;;
++  *)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++    ;;
++  esac
++  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++fi
++
++for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++
++# Only perform the check for file, if the check method requires it
++case $deplibs_check_method in
++file_magic*)
++  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  case $MAGIC_CMD in
++[\\/*] |  ?:[\\/]*)
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/${ac_tool_prefix}file; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
++      if test -n "$file_magic_test_file"; then
++	case $deplibs_check_method in
++	"file_magic "*)
++	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++	    $EGREP "$file_magic_regex" > /dev/null; then
++	    :
++	  else
++	    cat <<EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
++
++EOF
++	  fi ;;
++	esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac
++fi
++
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++if test -z "$lt_cv_path_MAGIC_CMD"; then
++  if test -n "$ac_tool_prefix"; then
++    echo "$as_me:$LINENO: checking for file" >&5
++echo $ECHO_N "checking for file... $ECHO_C" >&6
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  case $MAGIC_CMD in
++[\\/*] |  ?:[\\/]*)
++  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++  ;;
++*)
++  lt_save_MAGIC_CMD="$MAGIC_CMD"
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
++  for ac_dir in $ac_dummy; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f $ac_dir/file; then
++      lt_cv_path_MAGIC_CMD="$ac_dir/file"
++      if test -n "$file_magic_test_file"; then
++	case $deplibs_check_method in
++	"file_magic "*)
++	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
++	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
++	    $EGREP "$file_magic_regex" > /dev/null; then
++	    :
++	  else
++	    cat <<EOF 1>&2
++
++*** Warning: the command libtool uses to detect shared libraries,
++*** $file_magic_cmd, produces output that libtool cannot recognize.
++*** The result is that libtool may fail to recognize shared libraries
++*** as such.  This will affect the creation of libtool libraries that
++*** depend on shared libraries, but programs linked with such libtool
++*** libraries will work regardless of this problem.  Nevertheless, you
++*** may want to report the problem to your system manager and/or to
++*** bug-libtool@gnu.org
++
++EOF
++	  fi ;;
++	esac
++      fi
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++  MAGIC_CMD="$lt_save_MAGIC_CMD"
++  ;;
++esac
++fi
++
++MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
++if test -n "$MAGIC_CMD"; then
++  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++  else
++    MAGIC_CMD=:
++  fi
++fi
++
++  fi
++  ;;
++esac
++
++enable_dlopen=no
++enable_win32_dll=yes
++
++# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
++if test "${enable_libtool_lock+set}" = set; then
++  enableval="$enable_libtool_lock"
++
++fi;
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++
++# Check whether --with-pic or --without-pic was given.
++if test "${with_pic+set}" = set; then
++  withval="$with_pic"
++  pic_mode="$withval"
++else
++  pic_mode=default
++fi;
++test -z "$pic_mode" && pic_mode=default
++
++# Use C for the default configuration in the libtool script
++tagname=
++lt_save_CC="$CC"
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++# Source file extension for C test sources.
++ac_ext=c
++
++# Object file extension for compiled C test sources.
++objext=o
++objext=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(){return(0);}\n'
++
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++
++
++
++lt_prog_compiler_no_builtin_flag=
++
++if test "$GCC" = yes; then
++  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
++
++
++echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_prog_compiler_rtti_exceptions=no
++  ac_outfile=conftest.$ac_objext
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="-fno-rtti -fno-exceptions"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:6652: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:6656: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_rtti_exceptions=yes
++     fi
++   fi
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
++
++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
++    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
++else
++    :
++fi
++
++fi
++
++lt_prog_compiler_wl=
++lt_prog_compiler_pic=
++lt_prog_compiler_static=
++
++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
++
++  if test "$GCC" = yes; then
++    lt_prog_compiler_wl='-Wl,'
++    lt_prog_compiler_static='-static'
++
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      # FIXME: we need at least 68020 code to build shared libraries, but
++      # adding the `-m68020' flag to GCC prevents building anything better,
++      # like `-m68040'.
++      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
++      ;;
++
++    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic='-DDLL_EXPORT'
++      ;;
++
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      lt_prog_compiler_pic='-fno-common'
++      ;;
++
++    interix3*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      lt_prog_compiler_can_build_shared=no
++      enable_shared=no
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	lt_prog_compiler_pic=-Kconform_pic
++      fi
++      ;;
++
++    hpux*)
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	lt_prog_compiler_pic='-fPIC'
++	;;
++      esac
++      ;;
++
++    *)
++      lt_prog_compiler_pic='-fPIC'
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      lt_prog_compiler_wl='-Wl,'
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static='-Bstatic'
++      else
++	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++      darwin*)
++        # PIC is the default on this platform
++        # Common symbols not allowed in MH_DYLIB files
++       case $cc_basename in
++         xlc*)
++         lt_prog_compiler_pic='-qnocommon'
++         lt_prog_compiler_wl='-Wl,'
++         ;;
++       esac
++       ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic='-DDLL_EXPORT'
++      ;;
++
++    hpux9* | hpux10* | hpux11*)
++      lt_prog_compiler_wl='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	lt_prog_compiler_pic='+Z'
++	;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      lt_prog_compiler_static='${wl}-a ${wl}archive'
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      lt_prog_compiler_wl='-Wl,'
++      # PIC (with -KPIC) is the default.
++      lt_prog_compiler_static='-non_shared'
++      ;;
++
++    newsos6)
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
++
++    linux*)
++      case $cc_basename in
++      icc* | ecc*)
++	lt_prog_compiler_wl='-Wl,'
++	lt_prog_compiler_pic='-KPIC'
++	lt_prog_compiler_static='-static'
++        ;;
++      pgcc* | pgf77* | pgf90* | pgf95*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++	# which looks to be a dead project)
++	lt_prog_compiler_wl='-Wl,'
++	lt_prog_compiler_pic='-fpic'
++	lt_prog_compiler_static='-Bstatic'
++        ;;
++      ccc*)
++        lt_prog_compiler_wl='-Wl,'
++        # All Alpha code is PIC.
++        lt_prog_compiler_static='-non_shared'
++        ;;
++      esac
++      ;;
++
++    osf3* | osf4* | osf5*)
++      lt_prog_compiler_wl='-Wl,'
++      # All OSF/1 code is PIC.
++      lt_prog_compiler_static='-non_shared'
++      ;;
++
++    solaris*)
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95*)
++	lt_prog_compiler_wl='-Qoption ld ';;
++      *)
++	lt_prog_compiler_wl='-Wl,';;
++      esac
++      ;;
++
++    sunos4*)
++      lt_prog_compiler_wl='-Qoption ld '
++      lt_prog_compiler_pic='-PIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
++
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++	lt_prog_compiler_pic='-Kconform_pic'
++	lt_prog_compiler_static='-Bstatic'
++      fi
++      ;;
++
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_pic='-KPIC'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
++
++    unicos*)
++      lt_prog_compiler_wl='-Wl,'
++      lt_prog_compiler_can_build_shared=no
++      ;;
++
++    uts4*)
++      lt_prog_compiler_pic='-pic'
++      lt_prog_compiler_static='-Bstatic'
++      ;;
++
++    *)
++      lt_prog_compiler_can_build_shared=no
++      ;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic" >&6
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$lt_prog_compiler_pic"; then
++
++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
++if test "${lt_prog_compiler_pic_works+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_pic_works=no
++  ac_outfile=conftest.$ac_objext
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:6920: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:6924: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_prog_compiler_pic_works=yes
++     fi
++   fi
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
++
++if test x"$lt_prog_compiler_pic_works" = xyes; then
++    case $lt_prog_compiler_pic in
++     "" | " "*) ;;
++     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
++     esac
++else
++    lt_prog_compiler_pic=
++     lt_prog_compiler_can_build_shared=no
++fi
++
++fi
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    lt_prog_compiler_pic=
++    ;;
++  *)
++    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
++    ;;
++esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
++if test "${lt_prog_compiler_static_works+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_static_works=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
++   printf "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&5
++       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         lt_prog_compiler_static_works=yes
++       fi
++     else
++       lt_prog_compiler_static_works=yes
++     fi
++   fi
++   $rm conftest*
++   LDFLAGS="$save_LDFLAGS"
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
++echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
++
++if test x"$lt_prog_compiler_static_works" = xyes; then
++    :
++else
++    lt_prog_compiler_static=
++fi
++
++
++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
++if test "${lt_cv_prog_compiler_c_o+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_prog_compiler_c_o=no
++   $rm -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:7024: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&5
++   echo "$as_me:7028: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_c_o=yes
++     fi
++   fi
++   chmod u+w . 2>&5
++   $rm conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++   $rm out/* && rmdir out
++   cd ..
++   rmdir conftest
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
++
++
++hard_links="nottested"
++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
++  hard_links=yes
++  $rm conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6
++  if test "$hard_links" = no; then
++    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++
++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
++
++  runpath_var=
++  allow_undefined_flag=
++  enable_shared_with_static_runtimes=no
++  archive_cmds=
++  archive_expsym_cmds=
++  old_archive_From_new_cmds=
++  old_archive_from_expsyms_cmds=
++  export_dynamic_flag_spec=
++  whole_archive_flag_spec=
++  thread_safe_flag_spec=
++  hardcode_libdir_flag_spec=
++  hardcode_libdir_flag_spec_ld=
++  hardcode_libdir_separator=
++  hardcode_direct=no
++  hardcode_minus_L=no
++  hardcode_shlibpath_var=unsupported
++  link_all_deplibs=unknown
++  hardcode_automatic=no
++  module_cmds=
++  module_expsym_cmds=
++  always_export_symbols=no
++  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  include_expsyms=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  extract_expsyms_cmds=
++  # Just being paranoid about ensuring that cc_basename is set.
++  for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++  case $host_os in
++  cygwin* | mingw* | pw32*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
++    ;;
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
++    ;;
++  openbsd*)
++    with_gnu_ld=no
++    ;;
++  esac
++
++  ld_shlibs=yes
++  if test "$with_gnu_ld" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
++
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
++    export_dynamic_flag_spec='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
++	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++      else
++  	whole_archive_flag_spec=
++    fi
++    supports_anon_versioning=no
++    case `$LD -v 2>/dev/null` in
++      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
++
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix3* | aix4* | aix5*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++	ld_shlibs=no
++	cat <<EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++EOF
++      fi
++      ;;
++
++    amigaos*)
++      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_minus_L=yes
++
++      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
++      # that the semantics of dynamic libraries on AmigaOS, at least up
++      # to version 4, is to share data among multiple programs linked
++      # with the same dynamic library.  Since this doesn't match the
++      # behavior of shared libraries on other platforms, we can't use
++      # them.
++      ld_shlibs=no
++      ;;
++
++    beos*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	allow_undefined_flag=unsupported
++	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++	# support --undefined.  This deserves some investigation.  FIXME
++	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++	ld_shlibs=no
++      fi
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
++      # as there is no search path for DLLs.
++      hardcode_libdir_flag_spec='-L$libdir'
++      allow_undefined_flag=unsupported
++      always_export_symbols=no
++      enable_shared_with_static_runtimes=yes
++      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
++
++      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	# If the export-symbols file already is a .def file (1st line
++	# is EXPORTS), use it as is; otherwise, prepend...
++	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	  cp $export_symbols $output_objdir/$soname.def;
++	else
++	  echo EXPORTS > $output_objdir/$soname.def;
++	  cat $export_symbols >> $output_objdir/$soname.def;
++	fi~
++	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++	ld_shlibs=no
++      fi
++      ;;
++
++    interix3*)
++      hardcode_direct=no
++      hardcode_shlibpath_var=no
++      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++      export_dynamic_flag_spec='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++
++    linux*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	tmp_addflag=
++	case $cc_basename,$host_cpu in
++	pgcc*)				# Portland Group C compiler
++	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag'
++	  ;;
++	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
++	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag -Mnomain' ;;
++	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
++	  tmp_addflag=' -i_dynamic' ;;
++	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
++	  tmp_addflag=' -i_dynamic -nofor_main' ;;
++	ifc* | ifort*)			# Intel Fortran compiler
++	  tmp_addflag=' -nofor_main' ;;
++	esac
++	archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++	if test $supports_anon_versioning = yes; then
++	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
++  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++  $echo "local: *; };" >> $output_objdir/$libname.ver~
++	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++	fi
++	link_all_deplibs=no
++      else
++	ld_shlibs=no
++      fi
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++	wlarc=
++      else
++	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
++
++    solaris*)
++      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
++	ld_shlibs=no
++	cat <<EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++EOF
++      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	ld_shlibs=no
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
++	ld_shlibs=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++	;;
++	*)
++	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
++	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
++	  else
++	    ld_shlibs=no
++	  fi
++	;;
++      esac
++      ;;
++
++    sunos4*)
++      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
++
++    *)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	ld_shlibs=no
++      fi
++      ;;
++    esac
++
++    if test "$ld_shlibs" = no; then
++      runpath_var=
++      hardcode_libdir_flag_spec=
++      export_dynamic_flag_spec=
++      whole_archive_flag_spec=
++    fi
++  else
++    # PORTME fill in a description of your system's linker (not GNU ld)
++    case $host_os in
++    aix3*)
++      allow_undefined_flag=unsupported
++      always_export_symbols=yes
++      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      hardcode_minus_L=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++	# Neither direct hardcoding nor static linking is supported with a
++	# broken collect2.
++	hardcode_direct=unsupported
++      fi
++      ;;
++
++    aix4* | aix5*)
++      if test "$host_cpu" = ia64; then
++	# On IA64, the linker does run time linking by default, so we don't
++	# have to do anything special.
++	aix_use_runtimelinking=no
++	exp_sym_flag='-Bexport'
++	no_entry_flag=""
++      else
++	# If we're using GNU nm, then we don't want the "-C" option.
++	# -C means demangle to AIX nm, but means don't demangle with GNU nm
++	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++	else
++	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++	fi
++	aix_use_runtimelinking=no
++
++	# Test if we are trying to use run time linking or normal
++	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
++	# need to do runtime linking.
++	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
++	  for ld_flag in $LDFLAGS; do
++  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++  	    aix_use_runtimelinking=yes
++  	    break
++  	  fi
++	  done
++	  ;;
++	esac
++
++	exp_sym_flag='-bexport'
++	no_entry_flag='-bnoentry'
++      fi
++
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++      archive_cmds=''
++      hardcode_direct=yes
++      hardcode_libdir_separator=':'
++      link_all_deplibs=yes
++
++      if test "$GCC" = yes; then
++	case $host_os in aix4.[012]|aix4.[012].*)
++	# We only want to do this on AIX 4.2 and lower, the check
++	# below for broken collect2 doesn't work under 4.3+
++	  collect2name=`${CC} -print-prog-name=collect2`
++	  if test -f "$collect2name" && \
++  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
++	  then
++  	  # We have reworked collect2
++  	  hardcode_direct=yes
++	  else
++  	  # We have old collect2
++  	  hardcode_direct=unsupported
++  	  # It fails to find uninstalled libraries when the uninstalled
++  	  # path is not listed in the libpath.  Setting hardcode_minus_L
++  	  # to unsupported forces relinking
++  	  hardcode_minus_L=yes
++  	  hardcode_libdir_flag_spec='-L$libdir'
++  	  hardcode_libdir_separator=
++	  fi
++	  ;;
++	esac
++	shared_flag='-shared'
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag="$shared_flag "'${wl}-G'
++	fi
++      else
++	# not using gcc
++	if test "$host_cpu" = ia64; then
++  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++  	# chokes on -Wl,-G. The following line is correct:
++	  shared_flag='-G'
++	else
++	  if test "$aix_use_runtimelinking" = yes; then
++	    shared_flag='${wl}-G'
++	  else
++	    shared_flag='${wl}-bM:SRE'
++	  fi
++	fi
++      fi
++
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      always_export_symbols=yes
++      if test "$aix_use_runtimelinking" = yes; then
++	# Warning - without using the other runtime loading flags (-brtl),
++	# -berok will link without error, but may produce a broken library.
++	allow_undefined_flag='-berok'
++       # Determine the default libpath from the value encoded in an empty executable.
++       cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++       else
++	if test "$host_cpu" = ia64; then
++	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
++	  allow_undefined_flag="-z nodefs"
++	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++	else
++	 # Determine the default libpath from the value encoded in an empty executable.
++	 cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
++	  # Warning - without using the other run time loading flags,
++	  # -berok will link without error, but may produce a broken library.
++	  no_undefined_flag=' ${wl}-bernotok'
++	  allow_undefined_flag=' ${wl}-berok'
++	  # Exported symbols can be pulled into shared objects from archives
++	  whole_archive_flag_spec='$convenience'
++	  archive_cmds_need_lc=yes
++	  # This is similar to how AIX traditionally builds its shared libraries.
++	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++	fi
++      fi
++      ;;
++
++    amigaos*)
++      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_minus_L=yes
++      # see comment about different semantics on the GNU ld section
++      ld_shlibs=no
++      ;;
++
++    bsdi[45]*)
++      export_dynamic_flag_spec=-rdynamic
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      hardcode_libdir_flag_spec=' '
++      allow_undefined_flag=unsupported
++      # Tell ltmain to make .lib files, not .a files.
++      libext=lib
++      # Tell ltmain to make .dll files, not .so files.
++      shrext_cmds=".dll"
++      # FIXME: Setting linknames here is a bad hack.
++      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++      # The linker will automatically build a .lib file if we build a DLL.
++      old_archive_From_new_cmds='true'
++      # FIXME: Should let the user specify the lib program.
++      old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
++      fix_srcfile_path='`cygpath -w "$srcfile"`'
++      enable_shared_with_static_runtimes=yes
++      ;;
++
++    darwin* | rhapsody*)
++      case $host_os in
++        rhapsody* | darwin1.[012])
++         allow_undefined_flag='${wl}-undefined ${wl}suppress'
++         ;;
++       *) # Darwin 1.3 on
++         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++         else
++           case ${MACOSX_DEPLOYMENT_TARGET} in
++             10.[012])
++               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++               ;;
++             10.*)
++               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
++               ;;
++           esac
++         fi
++         ;;
++      esac
++      archive_cmds_need_lc=no
++      hardcode_direct=no
++      hardcode_automatic=yes
++      hardcode_shlibpath_var=unsupported
++      whole_archive_flag_spec=''
++      link_all_deplibs=yes
++    if test "$GCC" = yes ; then
++    	output_verbose_link_cmd='echo'
++        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    else
++      case $cc_basename in
++        xlc*)
++         output_verbose_link_cmd='echo'
++         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
++         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          ;;
++       *)
++         ld_shlibs=no
++          ;;
++      esac
++    fi
++      ;;
++
++    dgux*)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_shlibpath_var=no
++      ;;
++
++    freebsd1*)
++      ld_shlibs=no
++      ;;
++
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
++
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2*)
++      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct=yes
++      hardcode_minus_L=yes
++      hardcode_shlibpath_var=no
++      ;;
++
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
++
++    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
++    kfreebsd*-gnu)
++      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      link_all_deplibs=no
++      ;;
++
++    hpux9*)
++      if test "$GCC" = yes; then
++	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++      hardcode_libdir_separator=:
++      hardcode_direct=yes
++
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      hardcode_minus_L=yes
++      export_dynamic_flag_spec='${wl}-E'
++      ;;
++
++    hpux10*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++	hardcode_libdir_separator=:
++
++	hardcode_direct=yes
++	export_dynamic_flag_spec='${wl}-E'
++
++	# hardcode_minus_L: Not really in the search PATH,
++	# but as the default location of the library.
++	hardcode_minus_L=yes
++      fi
++      ;;
++
++    hpux11*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      else
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      fi
++      if test "$with_gnu_ld" = no; then
++	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
++	hardcode_libdir_separator=:
++
++	case $host_cpu in
++	hppa*64*|ia64*)
++	  hardcode_libdir_flag_spec_ld='+b $libdir'
++	  hardcode_direct=no
++	  hardcode_shlibpath_var=no
++	  ;;
++	*)
++	  hardcode_direct=yes
++	  export_dynamic_flag_spec='${wl}-E'
++
++	  # hardcode_minus_L: Not really in the search PATH,
++	  # but as the default location of the library.
++	  hardcode_minus_L=yes
++	  ;;
++	esac
++      fi
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	hardcode_libdir_flag_spec_ld='-rpath $libdir'
++      fi
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator=:
++      link_all_deplibs=yes
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      ;;
++
++    newsos6)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct=yes
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator=:
++      hardcode_shlibpath_var=no
++      ;;
++
++    openbsd*)
++      hardcode_direct=yes
++      hardcode_shlibpath_var=no
++      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++	export_dynamic_flag_spec='${wl}-E'
++      else
++       case $host_os in
++	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++	   hardcode_libdir_flag_spec='-R$libdir'
++	   ;;
++	 *)
++	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++	   ;;
++       esac
++      fi
++      ;;
++
++    os2*)
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_minus_L=yes
++      allow_undefined_flag=unsupported
++      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
++
++    osf3*)
++      if test "$GCC" = yes; then
++	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	allow_undefined_flag=' -expect_unresolved \*'
++	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator=:
++      ;;
++
++    osf4* | osf5*)	# as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
++      else
++	allow_undefined_flag=' -expect_unresolved \*'
++	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
++	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
++
++	# Both c and cxx compiler support -rpath directly
++	hardcode_libdir_flag_spec='-rpath $libdir'
++      fi
++      hardcode_libdir_separator=:
++      ;;
++
++    solaris*)
++      no_undefined_flag=' -z text'
++      if test "$GCC" = yes; then
++	wlarc='${wl}'
++	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
++      else
++	wlarc=''
++	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
++      fi
++      hardcode_libdir_flag_spec='-R$libdir'
++      hardcode_shlibpath_var=no
++      case $host_os in
++      solaris2.[0-5] | solaris2.[0-5].*) ;;
++      *)
++ 	# The compiler driver will combine linker options so we
++ 	# cannot just pass the convience library names through
++ 	# without $wl, iff we do not link with $LD.
++ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
++ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
++ 	case $wlarc in
++ 	'')
++ 	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
++ 	*)
++ 	  whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
++ 	esac ;;
++      esac
++      link_all_deplibs=yes
++      ;;
++
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++	# Use $CC to link under sequent, because it throws in some extra .o
++	# files that make .init and .fini sections work.
++	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_direct=yes
++      hardcode_minus_L=yes
++      hardcode_shlibpath_var=no
++      ;;
++
++    sysv4)
++      case $host_vendor in
++	sni)
++	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  hardcode_direct=yes # is this really true???
++	;;
++	siemens)
++	  ## LD is ld it makes a PLAMLIB
++	  ## CC just makes a GrossModule.
++	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++	  reload_cmds='$CC -r -o $output$reload_objs'
++	  hardcode_direct=no
++        ;;
++	motorola)
++	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
++	;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      hardcode_shlibpath_var=no
++      ;;
++
++    sysv4.3*)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_shlibpath_var=no
++      export_dynamic_flag_spec='-Bexport'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	hardcode_shlibpath_var=no
++	runpath_var=LD_RUN_PATH
++	hardcode_runpath_var=yes
++	ld_shlibs=yes
++      fi
++      ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
++      no_undefined_flag='${wl}-z,text'
++      archive_cmds_need_lc=no
++      hardcode_shlibpath_var=no
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      no_undefined_flag='${wl}-z,text'
++      allow_undefined_flag='${wl}-z,nodefs'
++      archive_cmds_need_lc=no
++      hardcode_shlibpath_var=no
++      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++      hardcode_libdir_separator=':'
++      link_all_deplibs=yes
++      export_dynamic_flag_spec='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    uts4*)
++      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec='-L$libdir'
++      hardcode_shlibpath_var=no
++      ;;
++
++    *)
++      ld_shlibs=no
++      ;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $ld_shlibs" >&5
++echo "${ECHO_T}$ld_shlibs" >&6
++test "$ld_shlibs" = no && can_build_shared=no
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$archive_cmds_need_lc" in
++x|xyes)
++  # Assume -lc should be added
++  archive_cmds_need_lc=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $archive_cmds in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
++      $rm conftest*
++      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$lt_prog_compiler_wl
++	pic_flag=$lt_prog_compiler_pic
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$allow_undefined_flag
++        allow_undefined_flag=
++        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
++  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++        then
++	  archive_cmds_need_lc=no
++        else
++	  archive_cmds_need_lc=yes
++        fi
++        allow_undefined_flag=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $rm conftest*
++      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
++echo "${ECHO_T}$archive_cmds_need_lc" >&6
++      ;;
++    esac
++  fi
++  ;;
++esac
++
++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++if test "$GCC" = yes; then
++  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix4* | aix5*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[01] | aix4.[01].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++	   echo ' yes '
++	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++	:
++      else
++	can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  library_names_spec='$libname.ixlibrary $libname.a'
++  # Create ${libname}_ixlibrary.a entries in /sys/libs.
++  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[45]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $rm \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
++  if test "$GCC" = yes; then
++    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
++  else
++    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
++  fi
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++kfreebsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[123]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[01]* | freebsdelf3.[01]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
++  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  freebsd*) # from 4.6 on
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++   hppa*64*)
++     shrext_cmds='.sl'
++     hardcode_into_libs=yes
++     dynamic_linker="$host_os dld.sl"
++     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++     soname_spec='${libname}${release}${shared_ext}$major'
++     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++     ;;
++   *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix3*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++	if test "$lt_cv_prog_gnu_ld" = yes; then
++		version_type=linux
++	else
++		version_type=irix
++	fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++knetbsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++nto-qnx*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++    *)                         need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[89] | openbsd2.[89].*)
++	shlibpath_overrides_runpath=no
++	;;
++      *)
++	shlibpath_overrides_runpath=yes
++	;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      export_dynamic_flag_spec='${wl}-Blargedynsym'
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++    shlibpath_overrides_runpath=no
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    shlibpath_overrides_runpath=yes
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++	;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
++hardcode_action=
++if test -n "$hardcode_libdir_flag_spec" || \
++   test -n "$runpath_var" || \
++   test "X$hardcode_automatic" = "Xyes" ; then
++
++  # We can hardcode non-existant directories.
++  if test "$hardcode_direct" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
++     test "$hardcode_minus_L" != no; then
++    # Linking always hardcodes the temporary library directory.
++    hardcode_action=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    hardcode_action=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  hardcode_action=unsupported
++fi
++echo "$as_me:$LINENO: result: $hardcode_action" >&5
++echo "${ECHO_T}$hardcode_action" >&6
++
++if test "$hardcode_action" = relink; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++
++striplib=
++old_striplib=
++echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
++  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++  echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++  case $host_os in
++   darwin*)
++       if test -n "$STRIP" ; then
++         striplib="$STRIP -x"
++         echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++       else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++       ;;
++   *)
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++    ;;
++  esac
++fi
++
++if test "x$enable_dlopen" != xyes; then
++  enable_dlopen=unknown
++  enable_dlopen_self=unknown
++  enable_dlopen_self_static=unknown
++else
++  lt_cv_dlopen=no
++  lt_cv_dlopen_libs=
++
++  case $host_os in
++  beos*)
++    lt_cv_dlopen="load_add_on"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ;;
++
++  mingw* | pw32*)
++    lt_cv_dlopen="LoadLibrary"
++    lt_cv_dlopen_libs=
++   ;;
++
++  cygwin*)
++    lt_cv_dlopen="dlopen"
++    lt_cv_dlopen_libs=
++   ;;
++
++  darwin*)
++  # if libdl is installed we need to link against it
++    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl  $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_lib_dl_dlopen=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dl_dlopen=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
++if test $ac_cv_lib_dl_dlopen = yes; then
++  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
++else
++
++    lt_cv_dlopen="dyld"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++
++fi
++
++   ;;
++
++  *)
++    echo "$as_me:$LINENO: checking for shl_load" >&5
++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
++if test "${ac_cv_func_shl_load+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
++   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
++#define shl_load innocuous_shl_load
++
++/* System header to define __stub macros and hopefully few prototypes,
++    which can conflict with char shl_load (); below.
++    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++    <limits.h> exists even on freestanding compilers.  */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef shl_load
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++{
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char shl_load ();
++/* The GNU C library defines this for functions which it implements
++    to always fail with ENOSYS.  Some functions are actually named
++    something starting with __ and the normal name is an alias.  */
++#if defined (__stub_shl_load) || defined (__stub___shl_load)
++choke me
++#else
++char (*f) () = shl_load;
++#endif
++#ifdef __cplusplus
++}
++#endif
++
++int
++main ()
++{
++return f != shl_load;
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_func_shl_load=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_func_shl_load=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
++echo "${ECHO_T}$ac_cv_func_shl_load" >&6
++if test $ac_cv_func_shl_load = yes; then
++  lt_cv_dlopen="shl_load"
++else
++  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
++if test "${ac_cv_lib_dld_shl_load+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld  $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char shl_load ();
++int
++main ()
++{
++shl_load ();
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_lib_dld_shl_load=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dld_shl_load=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
++if test $ac_cv_lib_dld_shl_load = yes; then
++  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
++else
++  echo "$as_me:$LINENO: checking for dlopen" >&5
++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
++if test "${ac_cv_func_dlopen+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
++   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
++#define dlopen innocuous_dlopen
++
++/* System header to define __stub macros and hopefully few prototypes,
++    which can conflict with char dlopen (); below.
++    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++    <limits.h> exists even on freestanding compilers.  */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef dlopen
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++{
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char dlopen ();
++/* The GNU C library defines this for functions which it implements
++    to always fail with ENOSYS.  Some functions are actually named
++    something starting with __ and the normal name is an alias.  */
++#if defined (__stub_dlopen) || defined (__stub___dlopen)
++choke me
++#else
++char (*f) () = dlopen;
++#endif
++#ifdef __cplusplus
++}
++#endif
++
++int
++main ()
++{
++return f != dlopen;
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_func_dlopen=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_func_dlopen=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
++echo "${ECHO_T}$ac_cv_func_dlopen" >&6
++if test $ac_cv_func_dlopen = yes; then
++  lt_cv_dlopen="dlopen"
++else
++  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl  $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_lib_dl_dlopen=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dl_dlopen=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
++if test $ac_cv_lib_dl_dlopen = yes; then
++  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
++else
++  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
++if test "${ac_cv_lib_svld_dlopen+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-lsvld  $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_lib_svld_dlopen=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_svld_dlopen=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
++if test $ac_cv_lib_svld_dlopen = yes; then
++  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
++else
++  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
++if test "${ac_cv_lib_dld_dld_link+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld  $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++/* Override any gcc2 internal prototype to avoid an error.  */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++   builtin and then its argument prototype would still apply.  */
++char dld_link ();
++int
++main ()
++{
++dld_link ();
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++  ac_cv_lib_dld_dld_link=yes
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dld_dld_link=no
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
++if test $ac_cv_lib_dld_dld_link = yes; then
++  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
++fi
++
++
++fi
++
++
++fi
++
++
++fi
++
++
++fi
++
++
++fi
++
++    ;;
++  esac
++
++  if test "x$lt_cv_dlopen" != xno; then
++    enable_dlopen=yes
++  else
++    enable_dlopen=no
++  fi
++
++  case $lt_cv_dlopen in
++  dlopen)
++    save_CPPFLAGS="$CPPFLAGS"
++    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++    save_LDFLAGS="$LDFLAGS"
++    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++    save_LIBS="$LIBS"
++    LIBS="$lt_cv_dlopen_libs $LIBS"
++
++    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
++if test "${lt_cv_dlopen_self+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  	  if test "$cross_compiling" = yes; then :
++  lt_cv_dlopen_self=cross
++else
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<EOF
++#line 9382 "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL		RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL		DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL		0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW		DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW	RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW	DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW	0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++#ifdef __cplusplus
++extern "C" void exit (int);
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++    exit (status);
++}
++EOF
++  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&5 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
++      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
++      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
++    esac
++  else :
++    # compilation failed
++    lt_cv_dlopen_self=no
++  fi
++fi
++rm -fr conftest*
++
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self" >&6
++
++    if test "x$lt_cv_dlopen_self" = xyes; then
++      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
++if test "${lt_cv_dlopen_self_static+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  	  if test "$cross_compiling" = yes; then :
++  lt_cv_dlopen_self_static=cross
++else
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<EOF
++#line 9482 "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL		RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL		DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL		0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW		DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW	RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW	DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW	0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++#ifdef __cplusplus
++extern "C" void exit (int);
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++    exit (status);
++}
++EOF
++  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&5 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
++      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
++      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
++    esac
++  else :
++    # compilation failed
++    lt_cv_dlopen_self_static=no
++  fi
++fi
++rm -fr conftest*
++
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
++    fi
++
++    CPPFLAGS="$save_CPPFLAGS"
++    LDFLAGS="$save_LDFLAGS"
++    LIBS="$save_LIBS"
++    ;;
++  esac
++
++  case $lt_cv_dlopen_self in
++  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++  *) enable_dlopen_self=unknown ;;
++  esac
++
++  case $lt_cv_dlopen_self_static in
++  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++  *) enable_dlopen_self_static=unknown ;;
++  esac
++fi
++
++
++# Report which library types will actually be built
++echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
++echo "$as_me:$LINENO: result: $can_build_shared" >&5
++echo "${ECHO_T}$can_build_shared" >&6
++
++echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case $host_os in
++aix3*)
++  test "$enable_shared" = yes && enable_static=no
++  if test -n "$RANLIB"; then
++    archive_cmds="$archive_cmds~\$RANLIB \$lib"
++    postinstall_cmds='$RANLIB $lib'
++  fi
++  ;;
++
++aix4* | aix5*)
++  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++    test "$enable_shared" = yes && enable_static=no
++  fi
++    ;;
++esac
++echo "$as_me:$LINENO: result: $enable_shared" >&5
++echo "${ECHO_T}$enable_shared" >&6
++
++echo "$as_me:$LINENO: checking whether to build static libraries" >&5
++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++echo "$as_me:$LINENO: result: $enable_static" >&5
++echo "${ECHO_T}$enable_static" >&6
++
++# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++  # See if we are running on zsh, and set the options which allow our commands through
++  # without removal of \ escapes.
++  if test -n "${ZSH_VERSION+set}" ; then
++    setopt NO_GLOB_SUBST
++  fi
++  # Now quote all the things that may contain metacharacters while being
++  # careful not to overquote the AC_SUBSTed values.  We take copies of the
++  # variables and quote the copies for generation of the libtool script.
++  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++    SED SHELL STRIP \
++    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++    deplibs_check_method reload_flag reload_cmds need_locks \
++    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++    lt_cv_sys_global_symbol_to_c_name_address \
++    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++    old_postinstall_cmds old_postuninstall_cmds \
++    compiler \
++    CC \
++    LD \
++    lt_prog_compiler_wl \
++    lt_prog_compiler_pic \
++    lt_prog_compiler_static \
++    lt_prog_compiler_no_builtin_flag \
++    export_dynamic_flag_spec \
++    thread_safe_flag_spec \
++    whole_archive_flag_spec \
++    enable_shared_with_static_runtimes \
++    old_archive_cmds \
++    old_archive_from_new_cmds \
++    predep_objects \
++    postdep_objects \
++    predeps \
++    postdeps \
++    compiler_lib_search_path \
++    archive_cmds \
++    archive_expsym_cmds \
++    postinstall_cmds \
++    postuninstall_cmds \
++    old_archive_from_expsyms_cmds \
++    allow_undefined_flag \
++    no_undefined_flag \
++    export_symbols_cmds \
++    hardcode_libdir_flag_spec \
++    hardcode_libdir_flag_spec_ld \
++    hardcode_libdir_separator \
++    hardcode_automatic \
++    module_cmds \
++    module_expsym_cmds \
++    lt_cv_prog_compiler_c_o \
++    exclude_expsyms \
++    include_expsyms; do
++
++    case $var in
++    old_archive_cmds | \
++    old_archive_from_new_cmds | \
++    archive_cmds | \
++    archive_expsym_cmds | \
++    module_cmds | \
++    module_expsym_cmds | \
++    old_archive_from_expsyms_cmds | \
++    export_symbols_cmds | \
++    extract_expsyms_cmds | reload_cmds | finish_cmds | \
++    postinstall_cmds | postuninstall_cmds | \
++    old_postinstall_cmds | old_postuninstall_cmds | \
++    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++      # Double-quote double-evaled strings.
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++      ;;
++    *)
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++      ;;
++    esac
++  done
++
++  case $lt_echo in
++  *'\$0 --fallback-echo"')
++    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
++    ;;
++  esac
++
++cfgfile="${ofile}T"
++  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
++  $rm -f "$cfgfile"
++  { echo "$as_me:$LINENO: creating $ofile" >&5
++echo "$as_me: creating $ofile" >&6;}
++
++  cat <<__EOF__ >> "$cfgfile"
++#! $SHELL
++
++# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
++# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
++# Free Software Foundation, Inc.
++#
++# This file is part of GNU Libtool:
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# A sed program that does not truncate output.
++SED=$lt_SED
++
++# Sed that helps us avoid accidentally triggering echo(1) options like -n.
++Xsed="$SED -e 1s/^X//"
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++# The names of the tagged configurations supported by this script.
++available_tags=
++
++# ### BEGIN LIBTOOL CONFIG
++
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$archive_cmds_need_lc
++
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
++
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
++
++# A C compiler.
++LTCC=$lt_LTCC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
++# A language-specific compiler.
++CC=$lt_compiler
++
++# Is the compiler the GNU C compiler?
++with_gcc=$GCC
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# The linker used to build libraries.
++LD=$lt_LD
++
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
++
++# A BSD-compatible nm program.
++NM=$lt_NM
++
++# A symbol stripping program
++STRIP=$lt_STRIP
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
++
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
++
++# Used on cygwin: assembler.
++AS="$AS"
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl
++
++# Object file suffix (normally "o").
++objext="$ac_objext"
++
++# Old archive suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
++
++# Executable file suffix (normally "").
++exeext="$exeext"
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_lt_prog_compiler_pic
++pic_mode=$pic_mode
++
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_lt_cv_prog_compiler_c_o
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_lt_prog_compiler_static
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_whole_archive_flag_spec
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_thread_safe_flag_spec
++
++# Library versioning type.
++version_type=$version_type
++
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
++
++# List of archive names.  First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
++
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
++
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_old_archive_cmds
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
++
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_archive_cmds
++archive_expsym_cmds=$lt_archive_expsym_cmds
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
++
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_module_cmds
++module_expsym_cmds=$lt_module_expsym_cmds
++
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_predep_objects
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_postdep_objects
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_predeps
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_postdeps
++
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_compiler_lib_search_path
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_allow_undefined_flag
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_no_undefined_flag
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
++
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$hardcode_action
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
++
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_hardcode_libdir_separator
++
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$hardcode_direct
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$hardcode_minus_L
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$hardcode_shlibpath_var
++
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$hardcode_automatic
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$link_all_deplibs
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path="$fix_srcfile_path"
++
++# Set to yes if exported symbols are required.
++always_export_symbols=$always_export_symbols
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_export_symbols_cmds
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_exclude_expsyms
++
++# Symbols that must always be exported.
++include_expsyms=$lt_include_expsyms
++
++# ### END LIBTOOL CONFIG
++
++__EOF__
++
++
++  case $host_os in
++  aix3*)
++    cat <<\EOF >> "$cfgfile"
++
++# AIX sometimes has problems with the GCC collect2 program.  For some
++# reason, if we set the COLLECT_NAMES environment variable, the problems
++# vanish in a puff of smoke.
++if test "X${COLLECT_NAMES+set}" != Xset; then
++  COLLECT_NAMES=
++  export COLLECT_NAMES
++fi
++EOF
++    ;;
++  esac
++
++  # We use sed instead of cat because bash on DJGPP gets confused if
++  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
++  # text mode, it properly converts lines to CR/LF.  This bash problem
++  # is reportedly fixed, but why not run on old versions too?
++  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
++
++  mv -f "$cfgfile" "$ofile" || \
++    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
++  chmod +x "$ofile"
++
++else
++  # If there is no Makefile yet, we rely on a make rule to execute
++  # `config.status --recheck' to rerun these tests and create the
++  # libtool script then.
++  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++  if test -f "$ltmain_in"; then
++    test -f Makefile && make "$ltmain"
++  fi
++fi
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++CC="$lt_save_CC"
++
++
++# Check whether --with-tags or --without-tags was given.
++if test "${with_tags+set}" = set; then
++  withval="$with_tags"
++  tagnames="$withval"
++fi;
++
++if test -f "$ltmain" && test -n "$tagnames"; then
++  if test ! -f "${ofile}"; then
++    { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
++echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
++  fi
++
++  if test -z "$LTCC"; then
++    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
++    if test -z "$LTCC"; then
++      { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
++echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
++    else
++      { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
++echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
++    fi
++  fi
++  if test -z "$LTCFLAGS"; then
++    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
++  fi
++
++  # Extract list of available tagged configurations in $ofile.
++  # Note that this assumes the entire list is on one line.
++  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
++
++  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
++  for tagname in $tagnames; do
++    IFS="$lt_save_ifs"
++    # Check whether tagname contains only valid characters
++    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
++    "") ;;
++    *)  { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
++echo "$as_me: error: invalid tag name: $tagname" >&2;}
++   { (exit 1); exit 1; }; }
++	;;
++    esac
++
++    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
++    then
++      { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
++echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
++   { (exit 1); exit 1; }; }
++    fi
++
++    # Update the list of available tags.
++    if test -n "$tagname"; then
++      echo appending configuration tag \"$tagname\" to $ofile
++
++      case $tagname in
++      CXX)
++	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
++	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
++	    (test "X$CXX" != "Xg++"))) ; then
++	  ac_ext=cc
++ac_cpp='$CXXCPP $CPPFLAGS'
++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
++
++
++
++
++archive_cmds_need_lc_CXX=no
++allow_undefined_flag_CXX=
++always_export_symbols_CXX=no
++archive_expsym_cmds_CXX=
++export_dynamic_flag_spec_CXX=
++hardcode_direct_CXX=no
++hardcode_libdir_flag_spec_CXX=
++hardcode_libdir_flag_spec_ld_CXX=
++hardcode_libdir_separator_CXX=
++hardcode_minus_L_CXX=no
++hardcode_shlibpath_var_CXX=unsupported
++hardcode_automatic_CXX=no
++module_cmds_CXX=
++module_expsym_cmds_CXX=
++link_all_deplibs_CXX=unknown
++old_archive_cmds_CXX=$old_archive_cmds
++no_undefined_flag_CXX=
++whole_archive_flag_spec_CXX=
++enable_shared_with_static_runtimes_CXX=no
++
++# Dependencies to place before and after the object being linked:
++predep_objects_CXX=
++postdep_objects_CXX=
++predeps_CXX=
++postdeps_CXX=
++compiler_lib_search_path_CXX=
++
++# Source file extension for C++ test sources.
++ac_ext=cpp
++
++# Object file extension for compiled C++ test sources.
++objext=o
++objext_CXX=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="int some_variable = 0;\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++
++
++# Allow CC to be a program name with arguments.
++lt_save_CC=$CC
++lt_save_LD=$LD
++lt_save_GCC=$GCC
++GCC=$GXX
++lt_save_with_gnu_ld=$with_gnu_ld
++lt_save_path_LD=$lt_cv_path_LD
++if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
++  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
++else
++  $as_unset lt_cv_prog_gnu_ld
++fi
++if test -n "${lt_cv_path_LDCXX+set}"; then
++  lt_cv_path_LD=$lt_cv_path_LDCXX
++else
++  $as_unset lt_cv_path_LD
++fi
++test -z "${LDCXX+set}" || LD=$LDCXX
++CC=${CXX-"c++"}
++compiler=$CC
++compiler_CXX=$CC
++for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++
++# We don't want -fno-exception wen compiling C++ code, so set the
++# no_builtin_flag separately
++if test "$GXX" = yes; then
++  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
++else
++  lt_prog_compiler_no_builtin_flag_CXX=
++fi
++
++if test "$GXX" = yes; then
++  # Set up default GNU C++ configuration
++
++
++# Check whether --with-gnu-ld or --without-gnu-ld was given.
++if test "${with_gnu_ld+set}" = set; then
++  withval="$with_gnu_ld"
++  test "$withval" = no || with_gnu_ld=yes
++else
++  with_gnu_ld=no
++fi;
++ac_prog=ld
++if test "$GCC" = yes; then
++  # Check if gcc -print-prog-name=ld gives a path.
++  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
++  case $host in
++  *-*-mingw*)
++    # gcc leaves a trailing carriage return which upsets mingw
++    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
++  *)
++    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
++  esac
++  case $ac_prog in
++    # Accept absolute paths.
++    [\\/]* | ?:[\\/]*)
++      re_direlt='/[^/][^/]*/\.\./'
++      # Canonicalize the pathname of ld
++      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
++      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
++	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
++      done
++      test -z "$LD" && LD="$ac_prog"
++      ;;
++  "")
++    # If it fails, then pretend we aren't using GCC.
++    ac_prog=ld
++    ;;
++  *)
++    # If it is relative, then search for the first ld in PATH.
++    with_gnu_ld=unknown
++    ;;
++  esac
++elif test "$with_gnu_ld" = yes; then
++  echo "$as_me:$LINENO: checking for GNU ld" >&5
++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
++else
++  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
++fi
++if test "${lt_cv_path_LD+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -z "$LD"; then
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for ac_dir in $PATH; do
++    IFS="$lt_save_ifs"
++    test -z "$ac_dir" && ac_dir=.
++    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
++      lt_cv_path_LD="$ac_dir/$ac_prog"
++      # Check to see if the program is GNU ld.  I'd rather use --version,
++      # but apparently some variants of GNU ld only accept -v.
++      # Break only if it was the GNU/non-GNU ld that we prefer.
++      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
++      *GNU* | *'with BFD'*)
++	test "$with_gnu_ld" != no && break
++	;;
++      *)
++	test "$with_gnu_ld" != yes && break
++	;;
++      esac
++    fi
++  done
++  IFS="$lt_save_ifs"
++else
++  lt_cv_path_LD="$LD" # Let the user override the test with a path.
++fi
++fi
++
++LD="$lt_cv_path_LD"
++if test -n "$LD"; then
++  echo "$as_me:$LINENO: result: $LD" >&5
++echo "${ECHO_T}$LD" >&6
++else
++  echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
++   { (exit 1); exit 1; }; }
++echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
++if test "${lt_cv_prog_gnu_ld+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  # I'd rather use --version here, but apparently some GNU lds only accept -v.
++case `$LD -v 2>&1 </dev/null` in
++*GNU* | *'with BFD'*)
++  lt_cv_prog_gnu_ld=yes
++  ;;
++*)
++  lt_cv_prog_gnu_ld=no
++  ;;
++esac
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
++with_gnu_ld=$lt_cv_prog_gnu_ld
++
++
++
++  # Check if GNU C++ uses GNU ld as the underlying linker, since the
++  # archiving commands below assume that GNU ld is being used.
++  if test "$with_gnu_ld" = yes; then
++    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++
++    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
++    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
++
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
++    #     investigate it a little bit more. (MM)
++    wlarc='${wl}'
++
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
++	grep 'no-whole-archive' > /dev/null; then
++      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++    else
++      whole_archive_flag_spec_CXX=
++    fi
++  else
++    with_gnu_ld=no
++    wlarc=
++
++    # A generic and very simple default shared library creation
++    # command for GNU C++ for the case where it uses the native
++    # linker, instead of GNU ld.  If possible, this setting should
++    # overridden to take advantage of the native linker features on
++    # the platform it is being used on.
++    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++  fi
++
++  # Commands to make compiler produce verbose output that lists
++  # what "hidden" libraries, object files and flags are used when
++  # linking a shared library.
++  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++
++else
++  GXX=no
++  with_gnu_ld=no
++  wlarc=
++fi
++
++# PORTME: fill in a description of your system's C++ link characteristics
++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
++ld_shlibs_CXX=yes
++case $host_os in
++  aix3*)
++    # FIXME: insert proper C++ library support
++    ld_shlibs_CXX=no
++    ;;
++  aix4* | aix5*)
++    if test "$host_cpu" = ia64; then
++      # On IA64, the linker does run time linking by default, so we don't
++      # have to do anything special.
++      aix_use_runtimelinking=no
++      exp_sym_flag='-Bexport'
++      no_entry_flag=""
++    else
++      aix_use_runtimelinking=no
++
++      # Test if we are trying to use run time linking or normal
++      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++      # need to do runtime linking.
++      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
++	for ld_flag in $LDFLAGS; do
++	  case $ld_flag in
++	  *-brtl*)
++	    aix_use_runtimelinking=yes
++	    break
++	    ;;
++	  esac
++	done
++	;;
++      esac
++
++      exp_sym_flag='-bexport'
++      no_entry_flag='-bnoentry'
++    fi
++
++    # When large executables or shared objects are built, AIX ld can
++    # have problems creating the table of contents.  If linking a library
++    # or program results in "error TOC overflow" add -mminimal-toc to
++    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++    archive_cmds_CXX=''
++    hardcode_direct_CXX=yes
++    hardcode_libdir_separator_CXX=':'
++    link_all_deplibs_CXX=yes
++
++    if test "$GXX" = yes; then
++      case $host_os in aix4.[012]|aix4.[012].*)
++      # We only want to do this on AIX 4.2 and lower, the check
++      # below for broken collect2 doesn't work under 4.3+
++	collect2name=`${CC} -print-prog-name=collect2`
++	if test -f "$collect2name" && \
++	   strings "$collect2name" | grep resolve_lib_name >/dev/null
++	then
++	  # We have reworked collect2
++	  hardcode_direct_CXX=yes
++	else
++	  # We have old collect2
++	  hardcode_direct_CXX=unsupported
++	  # It fails to find uninstalled libraries when the uninstalled
++	  # path is not listed in the libpath.  Setting hardcode_minus_L
++	  # to unsupported forces relinking
++	  hardcode_minus_L_CXX=yes
++	  hardcode_libdir_flag_spec_CXX='-L$libdir'
++	  hardcode_libdir_separator_CXX=
++	fi
++	;;
++      esac
++      shared_flag='-shared'
++      if test "$aix_use_runtimelinking" = yes; then
++	shared_flag="$shared_flag "'${wl}-G'
++      fi
++    else
++      # not using gcc
++      if test "$host_cpu" = ia64; then
++	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++	# chokes on -Wl,-G. The following line is correct:
++	shared_flag='-G'
++      else
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag='${wl}-G'
++	else
++	  shared_flag='${wl}-bM:SRE'
++	fi
++      fi
++    fi
++
++    # It seems that -bexpall does not export symbols beginning with
++    # underscore (_), so it is better to generate a list of symbols to export.
++    always_export_symbols_CXX=yes
++    if test "$aix_use_runtimelinking" = yes; then
++      # Warning - without using the other runtime loading flags (-brtl),
++      # -berok will link without error, but may produce a broken library.
++      allow_undefined_flag_CXX='-berok'
++      # Determine the default libpath from the value encoded in an empty executable.
++      cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
++
++      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++     else
++      if test "$host_cpu" = ia64; then
++	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
++	allow_undefined_flag_CXX="-z nodefs"
++	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++      else
++	# Determine the default libpath from the value encoded in an empty executable.
++	cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
++	# Warning - without using the other run time loading flags,
++	# -berok will link without error, but may produce a broken library.
++	no_undefined_flag_CXX=' ${wl}-bernotok'
++	allow_undefined_flag_CXX=' ${wl}-berok'
++	# Exported symbols can be pulled into shared objects from archives
++	whole_archive_flag_spec_CXX='$convenience'
++	archive_cmds_need_lc_CXX=yes
++	# This is similar to how AIX traditionally builds its shared libraries.
++	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++      fi
++    fi
++    ;;
++
++  beos*)
++    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++      allow_undefined_flag_CXX=unsupported
++      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++      # support --undefined.  This deserves some investigation.  FIXME
++      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++    else
++      ld_shlibs_CXX=no
++    fi
++    ;;
++
++  chorus*)
++    case $cc_basename in
++      *)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++    esac
++    ;;
++
++  cygwin* | mingw* | pw32*)
++    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
++    # as there is no search path for DLLs.
++    hardcode_libdir_flag_spec_CXX='-L$libdir'
++    allow_undefined_flag_CXX=unsupported
++    always_export_symbols_CXX=no
++    enable_shared_with_static_runtimes_CXX=yes
++
++    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      # If the export-symbols file already is a .def file (1st line
++      # is EXPORTS), use it as is; otherwise, prepend...
++      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	cp $export_symbols $output_objdir/$soname.def;
++      else
++	echo EXPORTS > $output_objdir/$soname.def;
++	cat $export_symbols >> $output_objdir/$soname.def;
++      fi~
++      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++    else
++      ld_shlibs_CXX=no
++    fi
++  ;;
++      darwin* | rhapsody*)
++        case $host_os in
++        rhapsody* | darwin1.[012])
++         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
++         ;;
++       *) # Darwin 1.3 on
++         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++         else
++           case ${MACOSX_DEPLOYMENT_TARGET} in
++             10.[012])
++               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++               ;;
++             10.*)
++               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
++               ;;
++           esac
++         fi
++         ;;
++        esac
++      archive_cmds_need_lc_CXX=no
++      hardcode_direct_CXX=no
++      hardcode_automatic_CXX=yes
++      hardcode_shlibpath_var_CXX=unsupported
++      whole_archive_flag_spec_CXX=''
++      link_all_deplibs_CXX=yes
++
++    if test "$GXX" = yes ; then
++      lt_int_apple_cc_single_mod=no
++      output_verbose_link_cmd='echo'
++      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
++       lt_int_apple_cc_single_mod=yes
++      fi
++      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
++       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++      else
++          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++        fi
++        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
++            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          else
++            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          fi
++            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++      else
++      case $cc_basename in
++        xlc*)
++         output_verbose_link_cmd='echo'
++          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
++          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          ;;
++       *)
++         ld_shlibs_CXX=no
++          ;;
++      esac
++      fi
++        ;;
++
++  dgux*)
++    case $cc_basename in
++      ec++*)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      ghcx*)
++	# Green Hills C++ Compiler
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++    esac
++    ;;
++  freebsd[12]*)
++    # C++ shared libraries reported to be fairly broken before switch to ELF
++    ld_shlibs_CXX=no
++    ;;
++  freebsd-elf*)
++    archive_cmds_need_lc_CXX=no
++    ;;
++  freebsd* | kfreebsd*-gnu | dragonfly*)
++    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
++    # conventions
++    ld_shlibs_CXX=yes
++    ;;
++  gnu*)
++    ;;
++  hpux9*)
++    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
++    hardcode_libdir_separator_CXX=:
++    export_dynamic_flag_spec_CXX='${wl}-E'
++    hardcode_direct_CXX=yes
++    hardcode_minus_L_CXX=yes # Not in the search PATH,
++				# but as the default
++				# location of the library.
++
++    case $cc_basename in
++    CC*)
++      # FIXME: insert proper C++ library support
++      ld_shlibs_CXX=no
++      ;;
++    aCC*)
++      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      # Commands to make compiler produce verbose output that lists
++      # what "hidden" libraries, object files and flags are used when
++      # linking a shared library.
++      #
++      # There doesn't appear to be a way to prevent this compiler from
++      # explicitly linking system object files so we need to strip them
++      # from the output so that they don't get included in the library
++      # dependencies.
++      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++      ;;
++    *)
++      if test "$GXX" = yes; then
++        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++        # FIXME: insert proper C++ library support
++        ld_shlibs_CXX=no
++      fi
++      ;;
++    esac
++    ;;
++  hpux10*|hpux11*)
++    if test $with_gnu_ld = no; then
++      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
++      hardcode_libdir_separator_CXX=:
++
++      case $host_cpu in
++      hppa*64*|ia64*)
++	hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
++        ;;
++      *)
++	export_dynamic_flag_spec_CXX='${wl}-E'
++        ;;
++      esac
++    fi
++    case $host_cpu in
++    hppa*64*|ia64*)
++      hardcode_direct_CXX=no
++      hardcode_shlibpath_var_CXX=no
++      ;;
++    *)
++      hardcode_direct_CXX=yes
++      hardcode_minus_L_CXX=yes # Not in the search PATH,
++					      # but as the default
++					      # location of the library.
++      ;;
++    esac
++
++    case $cc_basename in
++      CC*)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      aCC*)
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	  ;;
++	esac
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++      *)
++	if test "$GXX" = yes; then
++	  if test $with_gnu_ld = no; then
++	    case $host_cpu in
++	    hppa*64*)
++	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      ;;
++	    ia64*)
++	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      ;;
++	    *)
++	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	      ;;
++	    esac
++	  fi
++	else
++	  # FIXME: insert proper C++ library support
++	  ld_shlibs_CXX=no
++	fi
++	;;
++    esac
++    ;;
++  interix3*)
++    hardcode_direct_CXX=no
++    hardcode_shlibpath_var_CXX=no
++    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
++    export_dynamic_flag_spec_CXX='${wl}-E'
++    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++    # Instead, shared libraries are loaded at an image base (0x10000000 by
++    # default) and relocated if they conflict, which is a slow very memory
++    # consuming and fragmenting process.  To avoid this, we pick a random,
++    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++    ;;
++  irix5* | irix6*)
++    case $cc_basename in
++      CC*)
++	# SGI C++
++	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++
++	# Archives containing C++ object files must be created using
++	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
++	# necessary to make sure instantiated templates are included
++	# in the archive.
++	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
++	;;
++      *)
++	if test "$GXX" = yes; then
++	  if test "$with_gnu_ld" = no; then
++	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	  else
++	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
++	  fi
++	fi
++	link_all_deplibs_CXX=yes
++	;;
++    esac
++    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
++    hardcode_libdir_separator_CXX=:
++    ;;
++  linux*)
++    case $cc_basename in
++      KCC*)
++	# Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	# KCC will only create a shared library if the output file
++	# ends with ".so" (or ".sl" for HP-UX), so rename the library
++	# to its proper name (with version) after linking.
++	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++
++	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
++	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
++
++	# Archives containing C++ object files must be created using
++	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
++	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
++	;;
++      icpc*)
++	# Intel C++
++	with_gnu_ld=yes
++	# version 8.0 and above of icpc choke on multiply defined symbols
++	# if we add $predep_objects and $postdep_objects, however 7.1 and
++	# earlier do not add the objects themselves.
++	case `$CC -V 2>&1` in
++	*"Version 7."*)
++  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	  ;;
++	*)  # Version 8.0 or newer
++	  tmp_idyn=
++	  case $host_cpu in
++	    ia64*) tmp_idyn=' -i_dynamic';;
++	  esac
++  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++	  ;;
++	esac
++	archive_cmds_need_lc_CXX=no
++	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
++	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
++	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
++	;;
++      pgCC*)
++        # Portland Group C++ compiler
++	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
++  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
++
++	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
++	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
++	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++        ;;
++      cxx*)
++	# Compaq C++
++	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
++
++	runpath_var=LD_RUN_PATH
++	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
++	hardcode_libdir_separator_CXX=:
++
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++    esac
++    ;;
++  lynxos*)
++    # FIXME: insert proper C++ library support
++    ld_shlibs_CXX=no
++    ;;
++  m88k*)
++    # FIXME: insert proper C++ library support
++    ld_shlibs_CXX=no
++    ;;
++  mvs*)
++    case $cc_basename in
++      cxx*)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++    esac
++    ;;
++  netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
++      wlarc=
++      hardcode_libdir_flag_spec_CXX='-R$libdir'
++      hardcode_direct_CXX=yes
++      hardcode_shlibpath_var_CXX=no
++    fi
++    # Workaround some broken pre-1.5 toolchains
++    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
++    ;;
++  openbsd2*)
++    # C++ shared libraries are fairly broken
++    ld_shlibs_CXX=no
++    ;;
++  openbsd*)
++    hardcode_direct_CXX=yes
++    hardcode_shlibpath_var_CXX=no
++    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
++    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
++    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
++      export_dynamic_flag_spec_CXX='${wl}-E'
++      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++    fi
++    output_verbose_link_cmd='echo'
++    ;;
++  osf3*)
++    case $cc_basename in
++      KCC*)
++	# Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	# KCC will only create a shared library if the output file
++	# ends with ".so" (or ".sl" for HP-UX), so rename the library
++	# to its proper name (with version) after linking.
++	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
++	hardcode_libdir_separator_CXX=:
++
++	# Archives containing C++ object files must be created using
++	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
++	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
++
++	;;
++      RCC*)
++	# Rational C++ 2.4.1
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      cxx*)
++	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++
++	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
++	hardcode_libdir_separator_CXX=:
++
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++      *)
++	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
++	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++
++	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
++	  hardcode_libdir_separator_CXX=:
++
++	  # Commands to make compiler produce verbose output that lists
++	  # what "hidden" libraries, object files and flags are used when
++	  # linking a shared library.
++	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++
++	else
++	  # FIXME: insert proper C++ library support
++	  ld_shlibs_CXX=no
++	fi
++	;;
++    esac
++    ;;
++  osf4* | osf5*)
++    case $cc_basename in
++      KCC*)
++	# Kuck and Associates, Inc. (KAI) C++ Compiler
++
++	# KCC will only create a shared library if the output file
++	# ends with ".so" (or ".sl" for HP-UX), so rename the library
++	# to its proper name (with version) after linking.
++	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
++
++	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
++	hardcode_libdir_separator_CXX=:
++
++	# Archives containing C++ object files must be created using
++	# the KAI C++ compiler.
++	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
++	;;
++      RCC*)
++	# Rational C++ 2.4.1
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      cxx*)
++	allow_undefined_flag_CXX=' -expect_unresolved \*'
++	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
++	  echo "-hidden">> $lib.exp~
++	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
++	  $rm $lib.exp'
++
++	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
++	hardcode_libdir_separator_CXX=:
++
++	# Commands to make compiler produce verbose output that lists
++	# what "hidden" libraries, object files and flags are used when
++	# linking a shared library.
++	#
++	# There doesn't appear to be a way to prevent this compiler from
++	# explicitly linking system object files so we need to strip them
++	# from the output so that they don't get included in the library
++	# dependencies.
++	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
++	;;
++      *)
++	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
++	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++
++	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
++	  hardcode_libdir_separator_CXX=:
++
++	  # Commands to make compiler produce verbose output that lists
++	  # what "hidden" libraries, object files and flags are used when
++	  # linking a shared library.
++	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
++
++	else
++	  # FIXME: insert proper C++ library support
++	  ld_shlibs_CXX=no
++	fi
++	;;
++    esac
++    ;;
++  psos*)
++    # FIXME: insert proper C++ library support
++    ld_shlibs_CXX=no
++    ;;
++  sunos4*)
++    case $cc_basename in
++      CC*)
++	# Sun C++ 4.x
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      lcc*)
++	# Lucid
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++    esac
++    ;;
++  solaris*)
++    case $cc_basename in
++      CC*)
++	# Sun C++ 4.2, 5.x and Centerline C++
++        archive_cmds_need_lc_CXX=yes
++	no_undefined_flag_CXX=' -zdefs'
++	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
++	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++
++	hardcode_libdir_flag_spec_CXX='-R$libdir'
++	hardcode_shlibpath_var_CXX=no
++	case $host_os in
++	  solaris2.[0-5] | solaris2.[0-5].*) ;;
++	  *)
++	    # The C++ compiler is used as linker so we must use $wl
++	    # flag to pass the commands to the underlying system
++	    # linker. We must also pass each convience library through
++	    # to the system linker between allextract/defaultextract.
++	    # The C++ compiler will combine linker options so we
++	    # cannot just pass the convience library names through
++	    # without $wl.
++	    # Supported since Solaris 2.6 (maybe 2.5.1?)
++	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract'
++	    ;;
++	esac
++	link_all_deplibs_CXX=yes
++
++	output_verbose_link_cmd='echo'
++
++	# Archives containing C++ object files must be created using
++	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
++	# necessary to make sure instantiated templates are included
++	# in the archive.
++	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
++	;;
++      gcx*)
++	# Green Hills C++ Compiler
++	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++
++	# The C++ compiler must be used to create the archive.
++	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
++	;;
++      *)
++	# GNU C++ compiler with Solaris linker
++	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
++	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
++	  if $CC --version | grep -v '^2\.7' > /dev/null; then
++	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
++	  else
++	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
++	    # platform.
++	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
++	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
++
++	    # Commands to make compiler produce verbose output that lists
++	    # what "hidden" libraries, object files and flags are used when
++	    # linking a shared library.
++	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
++	  fi
++
++	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
++	fi
++	;;
++    esac
++    ;;
++  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
++    no_undefined_flag_CXX='${wl}-z,text'
++    archive_cmds_need_lc_CXX=no
++    hardcode_shlibpath_var_CXX=no
++    runpath_var='LD_RUN_PATH'
++
++    case $cc_basename in
++      CC*)
++	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++      *)
++	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++    esac
++    ;;
++  sysv5* | sco3.2v5* | sco5v6*)
++    # Note: We can NOT use -z defs as we might desire, because we do not
++    # link with -lc, and that would cause any symbols used from libc to
++    # always be unresolved, which means just about no library would
++    # ever link correctly.  If we're not using GNU ld we use -z text
++    # though, which does catch some bad symbols but isn't as heavy-handed
++    # as -z defs.
++    # For security reasons, it is highly recommended that you always
++    # use absolute paths for naming shared libraries, and exclude the
++    # DT_RUNPATH tag from executables and libraries.  But doing so
++    # requires that you compile everything twice, which is a pain.
++    # So that behaviour is only enabled if SCOABSPATH is set to a
++    # non-empty value in the environment.  Most likely only useful for
++    # creating official distributions of packages.
++    # This is a hack until libtool officially supports absolute path
++    # names for shared libraries.
++    no_undefined_flag_CXX='${wl}-z,text'
++    allow_undefined_flag_CXX='${wl}-z,nodefs'
++    archive_cmds_need_lc_CXX=no
++    hardcode_shlibpath_var_CXX=no
++    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++    hardcode_libdir_separator_CXX=':'
++    link_all_deplibs_CXX=yes
++    export_dynamic_flag_spec_CXX='${wl}-Bexport'
++    runpath_var='LD_RUN_PATH'
++
++    case $cc_basename in
++      CC*)
++	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++      *)
++	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	;;
++    esac
++    ;;
++  tandem*)
++    case $cc_basename in
++      NCC*)
++	# NonStop-UX NCC 3.20
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++      *)
++	# FIXME: insert proper C++ library support
++	ld_shlibs_CXX=no
++	;;
++    esac
++    ;;
++  vxworks*)
++    # FIXME: insert proper C++ library support
++    ld_shlibs_CXX=no
++    ;;
++  *)
++    # FIXME: insert proper C++ library support
++    ld_shlibs_CXX=no
++    ;;
++esac
++echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
++echo "${ECHO_T}$ld_shlibs_CXX" >&6
++test "$ld_shlibs_CXX" = no && can_build_shared=no
++
++GCC_CXX="$GXX"
++LD_CXX="$LD"
++
++
++cat > conftest.$ac_ext <<EOF
++class Foo
++{
++public:
++  Foo (void) { a = 0; }
++private:
++  int a;
++};
++EOF
++
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; then
++  # Parse the compiler output and extract the necessary
++  # objects, libraries and library flags.
++
++  # Sentinel used to keep track of whether or not we are before
++  # the conftest object file.
++  pre_test_object_deps_done=no
++
++  # The `*' in the case matches for architectures that use `case' in
++  # $output_verbose_cmd can trigger glob expansion during the loop
++  # eval without this substitution.
++  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
++
++  for p in `eval $output_verbose_link_cmd`; do
++    case $p in
++
++    -L* | -R* | -l*)
++       # Some compilers place space between "-{L,R}" and the path.
++       # Remove the space.
++       if test $p = "-L" \
++	  || test $p = "-R"; then
++	 prev=$p
++	 continue
++       else
++	 prev=
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++	 case $p in
++	 -L* | -R*)
++	   # Internal compiler library paths should come after those
++	   # provided the user.  The postdeps already come after the
++	   # user supplied libs so there is no need to process them.
++	   if test -z "$compiler_lib_search_path_CXX"; then
++	     compiler_lib_search_path_CXX="${prev}${p}"
++	   else
++	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
++	   fi
++	   ;;
++	 # The "-l" case would never come before the object being
++	 # linked, so don't bother handling this case.
++	 esac
++       else
++	 if test -z "$postdeps_CXX"; then
++	   postdeps_CXX="${prev}${p}"
++	 else
++	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
++	 fi
++       fi
++       ;;
++
++    *.$objext)
++       # This assumes that the test object file only shows up
++       # once in the compiler output.
++       if test "$p" = "conftest.$objext"; then
++	 pre_test_object_deps_done=yes
++	 continue
++       fi
++
++       if test "$pre_test_object_deps_done" = no; then
++	 if test -z "$predep_objects_CXX"; then
++	   predep_objects_CXX="$p"
++	 else
++	   predep_objects_CXX="$predep_objects_CXX $p"
++	 fi
++       else
++	 if test -z "$postdep_objects_CXX"; then
++	   postdep_objects_CXX="$p"
++	 else
++	   postdep_objects_CXX="$postdep_objects_CXX $p"
++	 fi
++       fi
++       ;;
++
++    *) ;; # Ignore the rest.
++
++    esac
++  done
++
++  # Clean up.
++  rm -f a.out a.exe
++else
++  echo "libtool.m4: error: problem compiling CXX test program"
++fi
++
++$rm -f confest.$objext
++
++# PORTME: override above test on systems where it is broken
++case $host_os in
++interix3*)
++  # Interix 3.5 installs completely hosed .la files for C++, so rather than
++  # hack all around it, let's just trust "g++" to DTRT.
++  predep_objects_CXX=
++  postdep_objects_CXX=
++  postdeps_CXX=
++  ;;
++
++solaris*)
++  case $cc_basename in
++  CC*)
++    # Adding this requires a known-good setup of shared libraries for
++    # Sun compiler versions before 5.6, else PIC objects from an old
++    # archive will be linked into the output, leading to subtle bugs.
++    postdeps_CXX='-lCstd -lCrun'
++    ;;
++  esac
++  ;;
++esac
++
++
++case " $postdeps_CXX " in
++*" -lc "*) archive_cmds_need_lc_CXX=no ;;
++esac
++
++lt_prog_compiler_wl_CXX=
++lt_prog_compiler_pic_CXX=
++lt_prog_compiler_static_CXX=
++
++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
++
++  # C++ specific cases for pic, static, wl, etc.
++  if test "$GXX" = yes; then
++    lt_prog_compiler_wl_CXX='-Wl,'
++    lt_prog_compiler_static_CXX='-static'
++
++    case $host_os in
++    aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static_CXX='-Bstatic'
++      fi
++      ;;
++    amigaos*)
++      # FIXME: we need at least 68020 code to build shared libraries, but
++      # adding the `-m68020' flag to GCC prevents building anything better,
++      # like `-m68040'.
++      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
++      ;;
++    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++    mingw* | os2* | pw32*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
++      ;;
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      lt_prog_compiler_pic_CXX='-fno-common'
++      ;;
++    *djgpp*)
++      # DJGPP does not support shared libraries at all
++      lt_prog_compiler_pic_CXX=
++      ;;
++    interix3*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	lt_prog_compiler_pic_CXX=-Kconform_pic
++      fi
++      ;;
++    hpux*)
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	;;
++      *)
++	lt_prog_compiler_pic_CXX='-fPIC'
++	;;
++      esac
++      ;;
++    *)
++      lt_prog_compiler_pic_CXX='-fPIC'
++      ;;
++    esac
++  else
++    case $host_os in
++      aix4* | aix5*)
++	# All AIX code is PIC.
++	if test "$host_cpu" = ia64; then
++	  # AIX 5 now supports IA64 processor
++	  lt_prog_compiler_static_CXX='-Bstatic'
++	else
++	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
++	fi
++	;;
++      chorus*)
++	case $cc_basename in
++	cxch68*)
++	  # Green Hills C++ Compiler
++	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
++	  ;;
++	esac
++	;;
++       darwin*)
++         # PIC is the default on this platform
++         # Common symbols not allowed in MH_DYLIB files
++         case $cc_basename in
++           xlc*)
++           lt_prog_compiler_pic_CXX='-qnocommon'
++           lt_prog_compiler_wl_CXX='-Wl,'
++           ;;
++         esac
++       ;;
++      dgux*)
++	case $cc_basename in
++	  ec++*)
++	    lt_prog_compiler_pic_CXX='-KPIC'
++	    ;;
++	  ghcx*)
++	    # Green Hills C++ Compiler
++	    lt_prog_compiler_pic_CXX='-pic'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      freebsd* | kfreebsd*-gnu | dragonfly*)
++	# FreeBSD uses GNU C++
++	;;
++      hpux9* | hpux10* | hpux11*)
++	case $cc_basename in
++	  CC*)
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
++	    if test "$host_cpu" != ia64; then
++	      lt_prog_compiler_pic_CXX='+Z'
++	    fi
++	    ;;
++	  aCC*)
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
++	    case $host_cpu in
++	    hppa*64*|ia64*)
++	      # +Z the default
++	      ;;
++	    *)
++	      lt_prog_compiler_pic_CXX='+Z'
++	      ;;
++	    esac
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      interix*)
++	# This is c89, which is MS Visual C++ (no shared libs)
++	# Anyone wants to do a port?
++	;;
++      irix5* | irix6* | nonstopux*)
++	case $cc_basename in
++	  CC*)
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    lt_prog_compiler_static_CXX='-non_shared'
++	    # CC pic flag -KPIC is the default.
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      linux*)
++	case $cc_basename in
++	  KCC*)
++	    # KAI C++ Compiler
++	    lt_prog_compiler_wl_CXX='--backend -Wl,'
++	    lt_prog_compiler_pic_CXX='-fPIC'
++	    ;;
++	  icpc* | ecpc*)
++	    # Intel C++
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    lt_prog_compiler_pic_CXX='-KPIC'
++	    lt_prog_compiler_static_CXX='-static'
++	    ;;
++	  pgCC*)
++	    # Portland Group C++ compiler.
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    lt_prog_compiler_pic_CXX='-fpic'
++	    lt_prog_compiler_static_CXX='-Bstatic'
++	    ;;
++	  cxx*)
++	    # Compaq C++
++	    # Make sure the PIC flag is empty.  It appears that all Alpha
++	    # Linux and Compaq Tru64 Unix objects are PIC.
++	    lt_prog_compiler_pic_CXX=
++	    lt_prog_compiler_static_CXX='-non_shared'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      lynxos*)
++	;;
++      m88k*)
++	;;
++      mvs*)
++	case $cc_basename in
++	  cxx*)
++	    lt_prog_compiler_pic_CXX='-W c,exportall'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++	;;
++      osf3* | osf4* | osf5*)
++	case $cc_basename in
++	  KCC*)
++	    lt_prog_compiler_wl_CXX='--backend -Wl,'
++	    ;;
++	  RCC*)
++	    # Rational C++ 2.4.1
++	    lt_prog_compiler_pic_CXX='-pic'
++	    ;;
++	  cxx*)
++	    # Digital/Compaq C++
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    # Make sure the PIC flag is empty.  It appears that all Alpha
++	    # Linux and Compaq Tru64 Unix objects are PIC.
++	    lt_prog_compiler_pic_CXX=
++	    lt_prog_compiler_static_CXX='-non_shared'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      psos*)
++	;;
++      solaris*)
++	case $cc_basename in
++	  CC*)
++	    # Sun C++ 4.2, 5.x and Centerline C++
++	    lt_prog_compiler_pic_CXX='-KPIC'
++	    lt_prog_compiler_static_CXX='-Bstatic'
++	    lt_prog_compiler_wl_CXX='-Qoption ld '
++	    ;;
++	  gcx*)
++	    # Green Hills C++ Compiler
++	    lt_prog_compiler_pic_CXX='-PIC'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      sunos4*)
++	case $cc_basename in
++	  CC*)
++	    # Sun C++ 4.x
++	    lt_prog_compiler_pic_CXX='-pic'
++	    lt_prog_compiler_static_CXX='-Bstatic'
++	    ;;
++	  lcc*)
++	    # Lucid
++	    lt_prog_compiler_pic_CXX='-pic'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      tandem*)
++	case $cc_basename in
++	  NCC*)
++	    # NonStop-UX NCC 3.20
++	    lt_prog_compiler_pic_CXX='-KPIC'
++	    ;;
++	  *)
++	    ;;
++	esac
++	;;
++      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++	case $cc_basename in
++	  CC*)
++	    lt_prog_compiler_wl_CXX='-Wl,'
++	    lt_prog_compiler_pic_CXX='-KPIC'
++	    lt_prog_compiler_static_CXX='-Bstatic'
++	    ;;
++	esac
++	;;
++      vxworks*)
++	;;
++      *)
++	lt_prog_compiler_can_build_shared_CXX=no
++	;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$lt_prog_compiler_pic_CXX"; then
++
++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
++if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_pic_works_CXX=no
++  ac_outfile=conftest.$ac_objext
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:11820: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:11824: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_prog_compiler_pic_works_CXX=yes
++     fi
++   fi
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
++
++if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
++    case $lt_prog_compiler_pic_CXX in
++     "" | " "*) ;;
++     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
++     esac
++else
++    lt_prog_compiler_pic_CXX=
++     lt_prog_compiler_can_build_shared_CXX=no
++fi
++
++fi
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    lt_prog_compiler_pic_CXX=
++    ;;
++  *)
++    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
++    ;;
++esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
++if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_static_works_CXX=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
++   printf "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&5
++       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         lt_prog_compiler_static_works_CXX=yes
++       fi
++     else
++       lt_prog_compiler_static_works_CXX=yes
++     fi
++   fi
++   $rm conftest*
++   LDFLAGS="$save_LDFLAGS"
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
++echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
++
++if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
++    :
++else
++    lt_prog_compiler_static_CXX=
++fi
++
++
++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
++if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_prog_compiler_c_o_CXX=no
++   $rm -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:11924: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&5
++   echo "$as_me:11928: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_c_o_CXX=yes
++     fi
++   fi
++   chmod u+w . 2>&5
++   $rm conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++   $rm out/* && rmdir out
++   cd ..
++   rmdir conftest
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
++
++
++hard_links="nottested"
++if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
++  hard_links=yes
++  $rm conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6
++  if test "$hard_links" = no; then
++    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++
++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
++
++  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  case $host_os in
++  aix4* | aix5*)
++    # If we're using GNU nm, then we don't want the "-C" option.
++    # -C means demangle to AIX nm, but means don't demangle with GNU nm
++    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++    else
++      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++    fi
++    ;;
++  pw32*)
++    export_symbols_cmds_CXX="$ltdll_cmds"
++  ;;
++  cygwin* | mingw*)
++    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
++  ;;
++  kfreebsd*-gnu)
++    link_all_deplibs_CXX=no
++  ;;
++  linux*)
++    link_all_deplibs_CXX=no
++  ;;
++  *)
++    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  ;;
++  esac
++
++echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
++echo "${ECHO_T}$ld_shlibs_CXX" >&6
++test "$ld_shlibs_CXX" = no && can_build_shared=no
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$archive_cmds_need_lc_CXX" in
++x|xyes)
++  # Assume -lc should be added
++  archive_cmds_need_lc_CXX=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $archive_cmds_CXX in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
++      $rm conftest*
++      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$lt_prog_compiler_wl_CXX
++	pic_flag=$lt_prog_compiler_pic_CXX
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
++        allow_undefined_flag_CXX=
++        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
++  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++        then
++	  archive_cmds_need_lc_CXX=no
++        else
++	  archive_cmds_need_lc_CXX=yes
++        fi
++        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $rm conftest*
++      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
++      ;;
++    esac
++  fi
++  ;;
++esac
++
++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++if test "$GCC" = yes; then
++  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix4* | aix5*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[01] | aix4.[01].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++	   echo ' yes '
++	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++	:
++      else
++	can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  library_names_spec='$libname.ixlibrary $libname.a'
++  # Create ${libname}_ixlibrary.a entries in /sys/libs.
++  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[45]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $rm \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
++  if test "$GCC" = yes; then
++    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
++  else
++    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
++  fi
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++kfreebsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[123]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[01]* | freebsdelf3.[01]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
++  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  freebsd*) # from 4.6 on
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++   hppa*64*)
++     shrext_cmds='.sl'
++     hardcode_into_libs=yes
++     dynamic_linker="$host_os dld.sl"
++     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++     soname_spec='${libname}${release}${shared_ext}$major'
++     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++     ;;
++   *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix3*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++	if test "$lt_cv_prog_gnu_ld" = yes; then
++		version_type=linux
++	else
++		version_type=irix
++	fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++knetbsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++nto-qnx*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++    *)                         need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[89] | openbsd2.[89].*)
++	shlibpath_overrides_runpath=no
++	;;
++      *)
++	shlibpath_overrides_runpath=yes
++	;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      export_dynamic_flag_spec='${wl}-Blargedynsym'
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++    shlibpath_overrides_runpath=no
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    shlibpath_overrides_runpath=yes
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++	;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
++hardcode_action_CXX=
++if test -n "$hardcode_libdir_flag_spec_CXX" || \
++   test -n "$runpath_var_CXX" || \
++   test "X$hardcode_automatic_CXX" = "Xyes" ; then
++
++  # We can hardcode non-existant directories.
++  if test "$hardcode_direct_CXX" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
++     test "$hardcode_minus_L_CXX" != no; then
++    # Linking always hardcodes the temporary library directory.
++    hardcode_action_CXX=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    hardcode_action_CXX=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  hardcode_action_CXX=unsupported
++fi
++echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
++echo "${ECHO_T}$hardcode_action_CXX" >&6
++
++if test "$hardcode_action_CXX" = relink; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++
++
++# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++  # See if we are running on zsh, and set the options which allow our commands through
++  # without removal of \ escapes.
++  if test -n "${ZSH_VERSION+set}" ; then
++    setopt NO_GLOB_SUBST
++  fi
++  # Now quote all the things that may contain metacharacters while being
++  # careful not to overquote the AC_SUBSTed values.  We take copies of the
++  # variables and quote the copies for generation of the libtool script.
++  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++    SED SHELL STRIP \
++    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++    deplibs_check_method reload_flag reload_cmds need_locks \
++    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++    lt_cv_sys_global_symbol_to_c_name_address \
++    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++    old_postinstall_cmds old_postuninstall_cmds \
++    compiler_CXX \
++    CC_CXX \
++    LD_CXX \
++    lt_prog_compiler_wl_CXX \
++    lt_prog_compiler_pic_CXX \
++    lt_prog_compiler_static_CXX \
++    lt_prog_compiler_no_builtin_flag_CXX \
++    export_dynamic_flag_spec_CXX \
++    thread_safe_flag_spec_CXX \
++    whole_archive_flag_spec_CXX \
++    enable_shared_with_static_runtimes_CXX \
++    old_archive_cmds_CXX \
++    old_archive_from_new_cmds_CXX \
++    predep_objects_CXX \
++    postdep_objects_CXX \
++    predeps_CXX \
++    postdeps_CXX \
++    compiler_lib_search_path_CXX \
++    archive_cmds_CXX \
++    archive_expsym_cmds_CXX \
++    postinstall_cmds_CXX \
++    postuninstall_cmds_CXX \
++    old_archive_from_expsyms_cmds_CXX \
++    allow_undefined_flag_CXX \
++    no_undefined_flag_CXX \
++    export_symbols_cmds_CXX \
++    hardcode_libdir_flag_spec_CXX \
++    hardcode_libdir_flag_spec_ld_CXX \
++    hardcode_libdir_separator_CXX \
++    hardcode_automatic_CXX \
++    module_cmds_CXX \
++    module_expsym_cmds_CXX \
++    lt_cv_prog_compiler_c_o_CXX \
++    exclude_expsyms_CXX \
++    include_expsyms_CXX; do
++
++    case $var in
++    old_archive_cmds_CXX | \
++    old_archive_from_new_cmds_CXX | \
++    archive_cmds_CXX | \
++    archive_expsym_cmds_CXX | \
++    module_cmds_CXX | \
++    module_expsym_cmds_CXX | \
++    old_archive_from_expsyms_cmds_CXX | \
++    export_symbols_cmds_CXX | \
++    extract_expsyms_cmds | reload_cmds | finish_cmds | \
++    postinstall_cmds | postuninstall_cmds | \
++    old_postinstall_cmds | old_postuninstall_cmds | \
++    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++      # Double-quote double-evaled strings.
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++      ;;
++    *)
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++      ;;
++    esac
++  done
++
++  case $lt_echo in
++  *'\$0 --fallback-echo"')
++    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
++    ;;
++  esac
++
++cfgfile="$ofile"
++
++  cat <<__EOF__ >> "$cfgfile"
++# ### BEGIN LIBTOOL TAG CONFIG: $tagname
++
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$archive_cmds_need_lc_CXX
++
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
++
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
++
++# A C compiler.
++LTCC=$lt_LTCC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
++# A language-specific compiler.
++CC=$lt_compiler_CXX
++
++# Is the compiler the GNU C compiler?
++with_gcc=$GCC_CXX
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# The linker used to build libraries.
++LD=$lt_LD_CXX
++
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
++
++# A BSD-compatible nm program.
++NM=$lt_NM
++
++# A symbol stripping program
++STRIP=$lt_STRIP
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
++
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
++
++# Used on cygwin: assembler.
++AS="$AS"
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl_CXX
++
++# Object file suffix (normally "o").
++objext="$ac_objext"
++
++# Old archive suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
++
++# Executable file suffix (normally "").
++exeext="$exeext"
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_lt_prog_compiler_pic_CXX
++pic_mode=$pic_mode
++
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_lt_prog_compiler_static_CXX
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
++
++# Library versioning type.
++version_type=$version_type
++
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
++
++# List of archive names.  First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
++
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
++
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_old_archive_cmds_CXX
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
++
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_archive_cmds_CXX
++archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
++
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_module_cmds_CXX
++module_expsym_cmds=$lt_module_expsym_cmds_CXX
++
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_predep_objects_CXX
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_postdep_objects_CXX
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_predeps_CXX
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_postdeps_CXX
++
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_allow_undefined_flag_CXX
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_no_undefined_flag_CXX
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
++
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$hardcode_action_CXX
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
++
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
++
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$hardcode_direct_CXX
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$hardcode_minus_L_CXX
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
++
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$hardcode_automatic_CXX
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$link_all_deplibs_CXX
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path="$fix_srcfile_path_CXX"
++
++# Set to yes if exported symbols are required.
++always_export_symbols=$always_export_symbols_CXX
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_export_symbols_cmds_CXX
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_exclude_expsyms_CXX
++
++# Symbols that must always be exported.
++include_expsyms=$lt_include_expsyms_CXX
++
++# ### END LIBTOOL TAG CONFIG: $tagname
++
++__EOF__
++
++
++else
++  # If there is no Makefile yet, we rely on a make rule to execute
++  # `config.status --recheck' to rerun these tests and create the
++  # libtool script then.
++  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++  if test -f "$ltmain_in"; then
++    test -f Makefile && make "$ltmain"
++  fi
++fi
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++CC=$lt_save_CC
++LDCXX=$LD
++LD=$lt_save_LD
++GCC=$lt_save_GCC
++with_gnu_ldcxx=$with_gnu_ld
++with_gnu_ld=$lt_save_with_gnu_ld
++lt_cv_path_LDCXX=$lt_cv_path_LD
++lt_cv_path_LD=$lt_save_path_LD
++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
++
++	else
++	  tagname=""
++	fi
++	;;
++
++      F77)
++	if test -n "$F77" && test "X$F77" != "Xno"; then
++
++ac_ext=f
++ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
++ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_f77_compiler_gnu
++
++
++archive_cmds_need_lc_F77=no
++allow_undefined_flag_F77=
++always_export_symbols_F77=no
++archive_expsym_cmds_F77=
++export_dynamic_flag_spec_F77=
++hardcode_direct_F77=no
++hardcode_libdir_flag_spec_F77=
++hardcode_libdir_flag_spec_ld_F77=
++hardcode_libdir_separator_F77=
++hardcode_minus_L_F77=no
++hardcode_automatic_F77=no
++module_cmds_F77=
++module_expsym_cmds_F77=
++link_all_deplibs_F77=unknown
++old_archive_cmds_F77=$old_archive_cmds
++no_undefined_flag_F77=
++whole_archive_flag_spec_F77=
++enable_shared_with_static_runtimes_F77=no
++
++# Source file extension for f77 test sources.
++ac_ext=f
++
++# Object file extension for compiled f77 test sources.
++objext=o
++objext_F77=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="      program t\n      end\n"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${F77-"f77"}
++compiler=$CC
++compiler_F77=$CC
++for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++
++echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
++echo "$as_me:$LINENO: result: $can_build_shared" >&5
++echo "${ECHO_T}$can_build_shared" >&6
++
++echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case $host_os in
++aix3*)
++  test "$enable_shared" = yes && enable_static=no
++  if test -n "$RANLIB"; then
++    archive_cmds="$archive_cmds~\$RANLIB \$lib"
++    postinstall_cmds='$RANLIB $lib'
++  fi
++  ;;
++aix4* | aix5*)
++  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++    test "$enable_shared" = yes && enable_static=no
++  fi
++  ;;
++esac
++echo "$as_me:$LINENO: result: $enable_shared" >&5
++echo "${ECHO_T}$enable_shared" >&6
++
++echo "$as_me:$LINENO: checking whether to build static libraries" >&5
++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++echo "$as_me:$LINENO: result: $enable_static" >&5
++echo "${ECHO_T}$enable_static" >&6
++
++GCC_F77="$G77"
++LD_F77="$LD"
++
++lt_prog_compiler_wl_F77=
++lt_prog_compiler_pic_F77=
++lt_prog_compiler_static_F77=
++
++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
++
++  if test "$GCC" = yes; then
++    lt_prog_compiler_wl_F77='-Wl,'
++    lt_prog_compiler_static_F77='-static'
++
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static_F77='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      # FIXME: we need at least 68020 code to build shared libraries, but
++      # adding the `-m68020' flag to GCC prevents building anything better,
++      # like `-m68040'.
++      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
++      ;;
++
++    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
++      ;;
++
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      lt_prog_compiler_pic_F77='-fno-common'
++      ;;
++
++    interix3*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      lt_prog_compiler_can_build_shared_F77=no
++      enable_shared=no
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	lt_prog_compiler_pic_F77=-Kconform_pic
++      fi
++      ;;
++
++    hpux*)
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	lt_prog_compiler_pic_F77='-fPIC'
++	;;
++      esac
++      ;;
++
++    *)
++      lt_prog_compiler_pic_F77='-fPIC'
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static_F77='-Bstatic'
++      else
++	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++      darwin*)
++        # PIC is the default on this platform
++        # Common symbols not allowed in MH_DYLIB files
++       case $cc_basename in
++         xlc*)
++         lt_prog_compiler_pic_F77='-qnocommon'
++         lt_prog_compiler_wl_F77='-Wl,'
++         ;;
++       esac
++       ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
++      ;;
++
++    hpux9* | hpux10* | hpux11*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	lt_prog_compiler_pic_F77='+Z'
++	;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      # PIC (with -KPIC) is the default.
++      lt_prog_compiler_static_F77='-non_shared'
++      ;;
++
++    newsos6)
++      lt_prog_compiler_pic_F77='-KPIC'
++      lt_prog_compiler_static_F77='-Bstatic'
++      ;;
++
++    linux*)
++      case $cc_basename in
++      icc* | ecc*)
++	lt_prog_compiler_wl_F77='-Wl,'
++	lt_prog_compiler_pic_F77='-KPIC'
++	lt_prog_compiler_static_F77='-static'
++        ;;
++      pgcc* | pgf77* | pgf90* | pgf95*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++	# which looks to be a dead project)
++	lt_prog_compiler_wl_F77='-Wl,'
++	lt_prog_compiler_pic_F77='-fpic'
++	lt_prog_compiler_static_F77='-Bstatic'
++        ;;
++      ccc*)
++        lt_prog_compiler_wl_F77='-Wl,'
++        # All Alpha code is PIC.
++        lt_prog_compiler_static_F77='-non_shared'
++        ;;
++      esac
++      ;;
++
++    osf3* | osf4* | osf5*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      # All OSF/1 code is PIC.
++      lt_prog_compiler_static_F77='-non_shared'
++      ;;
++
++    solaris*)
++      lt_prog_compiler_pic_F77='-KPIC'
++      lt_prog_compiler_static_F77='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95*)
++	lt_prog_compiler_wl_F77='-Qoption ld ';;
++      *)
++	lt_prog_compiler_wl_F77='-Wl,';;
++      esac
++      ;;
++
++    sunos4*)
++      lt_prog_compiler_wl_F77='-Qoption ld '
++      lt_prog_compiler_pic_F77='-PIC'
++      lt_prog_compiler_static_F77='-Bstatic'
++      ;;
++
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      lt_prog_compiler_pic_F77='-KPIC'
++      lt_prog_compiler_static_F77='-Bstatic'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++	lt_prog_compiler_pic_F77='-Kconform_pic'
++	lt_prog_compiler_static_F77='-Bstatic'
++      fi
++      ;;
++
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      lt_prog_compiler_pic_F77='-KPIC'
++      lt_prog_compiler_static_F77='-Bstatic'
++      ;;
++
++    unicos*)
++      lt_prog_compiler_wl_F77='-Wl,'
++      lt_prog_compiler_can_build_shared_F77=no
++      ;;
++
++    uts4*)
++      lt_prog_compiler_pic_F77='-pic'
++      lt_prog_compiler_static_F77='-Bstatic'
++      ;;
++
++    *)
++      lt_prog_compiler_can_build_shared_F77=no
++      ;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$lt_prog_compiler_pic_F77"; then
++
++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
++if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_pic_works_F77=no
++  ac_outfile=conftest.$ac_objext
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$lt_prog_compiler_pic_F77"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:13512: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:13516: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_prog_compiler_pic_works_F77=yes
++     fi
++   fi
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6
++
++if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
++    case $lt_prog_compiler_pic_F77 in
++     "" | " "*) ;;
++     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
++     esac
++else
++    lt_prog_compiler_pic_F77=
++     lt_prog_compiler_can_build_shared_F77=no
++fi
++
++fi
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    lt_prog_compiler_pic_F77=
++    ;;
++  *)
++    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
++    ;;
++esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
++if test "${lt_prog_compiler_static_works_F77+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_static_works_F77=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
++   printf "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&5
++       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         lt_prog_compiler_static_works_F77=yes
++       fi
++     else
++       lt_prog_compiler_static_works_F77=yes
++     fi
++   fi
++   $rm conftest*
++   LDFLAGS="$save_LDFLAGS"
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
++echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
++
++if test x"$lt_prog_compiler_static_works_F77" = xyes; then
++    :
++else
++    lt_prog_compiler_static_F77=
++fi
++
++
++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
++if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_prog_compiler_c_o_F77=no
++   $rm -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:13616: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&5
++   echo "$as_me:13620: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_c_o_F77=yes
++     fi
++   fi
++   chmod u+w . 2>&5
++   $rm conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++   $rm out/* && rmdir out
++   cd ..
++   rmdir conftest
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6
++
++
++hard_links="nottested"
++if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
++  hard_links=yes
++  $rm conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6
++  if test "$hard_links" = no; then
++    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++
++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
++
++  runpath_var=
++  allow_undefined_flag_F77=
++  enable_shared_with_static_runtimes_F77=no
++  archive_cmds_F77=
++  archive_expsym_cmds_F77=
++  old_archive_From_new_cmds_F77=
++  old_archive_from_expsyms_cmds_F77=
++  export_dynamic_flag_spec_F77=
++  whole_archive_flag_spec_F77=
++  thread_safe_flag_spec_F77=
++  hardcode_libdir_flag_spec_F77=
++  hardcode_libdir_flag_spec_ld_F77=
++  hardcode_libdir_separator_F77=
++  hardcode_direct_F77=no
++  hardcode_minus_L_F77=no
++  hardcode_shlibpath_var_F77=unsupported
++  link_all_deplibs_F77=unknown
++  hardcode_automatic_F77=no
++  module_cmds_F77=
++  module_expsym_cmds_F77=
++  always_export_symbols_F77=no
++  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  include_expsyms_F77=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  extract_expsyms_cmds=
++  # Just being paranoid about ensuring that cc_basename is set.
++  for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++  case $host_os in
++  cygwin* | mingw* | pw32*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
++    ;;
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
++    ;;
++  openbsd*)
++    with_gnu_ld=no
++    ;;
++  esac
++
++  ld_shlibs_F77=yes
++  if test "$with_gnu_ld" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
++
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
++    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
++	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++      else
++  	whole_archive_flag_spec_F77=
++    fi
++    supports_anon_versioning=no
++    case `$LD -v 2>/dev/null` in
++      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
++
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix3* | aix4* | aix5*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++	ld_shlibs_F77=no
++	cat <<EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++EOF
++      fi
++      ;;
++
++    amigaos*)
++      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      hardcode_minus_L_F77=yes
++
++      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
++      # that the semantics of dynamic libraries on AmigaOS, at least up
++      # to version 4, is to share data among multiple programs linked
++      # with the same dynamic library.  Since this doesn't match the
++      # behavior of shared libraries on other platforms, we can't use
++      # them.
++      ld_shlibs_F77=no
++      ;;
++
++    beos*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	allow_undefined_flag_F77=unsupported
++	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++	# support --undefined.  This deserves some investigation.  FIXME
++	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++	ld_shlibs_F77=no
++      fi
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
++      # as there is no search path for DLLs.
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      allow_undefined_flag_F77=unsupported
++      always_export_symbols_F77=no
++      enable_shared_with_static_runtimes_F77=yes
++      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
++
++      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	# If the export-symbols file already is a .def file (1st line
++	# is EXPORTS), use it as is; otherwise, prepend...
++	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	  cp $export_symbols $output_objdir/$soname.def;
++	else
++	  echo EXPORTS > $output_objdir/$soname.def;
++	  cat $export_symbols >> $output_objdir/$soname.def;
++	fi~
++	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++	ld_shlibs_F77=no
++      fi
++      ;;
++
++    interix3*)
++      hardcode_direct_F77=no
++      hardcode_shlibpath_var_F77=no
++      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
++      export_dynamic_flag_spec_F77='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++
++    linux*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	tmp_addflag=
++	case $cc_basename,$host_cpu in
++	pgcc*)				# Portland Group C compiler
++	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag'
++	  ;;
++	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
++	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag -Mnomain' ;;
++	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
++	  tmp_addflag=' -i_dynamic' ;;
++	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
++	  tmp_addflag=' -i_dynamic -nofor_main' ;;
++	ifc* | ifort*)			# Intel Fortran compiler
++	  tmp_addflag=' -nofor_main' ;;
++	esac
++	archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++	if test $supports_anon_versioning = yes; then
++	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
++  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++  $echo "local: *; };" >> $output_objdir/$libname.ver~
++	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++	fi
++	link_all_deplibs_F77=no
++      else
++	ld_shlibs_F77=no
++      fi
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++	wlarc=
++      else
++	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
++
++    solaris*)
++      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
++	ld_shlibs_F77=no
++	cat <<EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++EOF
++      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	ld_shlibs_F77=no
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
++	ld_shlibs_F77=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++	;;
++	*)
++	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
++	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
++	  else
++	    ld_shlibs_F77=no
++	  fi
++	;;
++      esac
++      ;;
++
++    sunos4*)
++      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      hardcode_direct_F77=yes
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    *)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	ld_shlibs_F77=no
++      fi
++      ;;
++    esac
++
++    if test "$ld_shlibs_F77" = no; then
++      runpath_var=
++      hardcode_libdir_flag_spec_F77=
++      export_dynamic_flag_spec_F77=
++      whole_archive_flag_spec_F77=
++    fi
++  else
++    # PORTME fill in a description of your system's linker (not GNU ld)
++    case $host_os in
++    aix3*)
++      allow_undefined_flag_F77=unsupported
++      always_export_symbols_F77=yes
++      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      hardcode_minus_L_F77=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++	# Neither direct hardcoding nor static linking is supported with a
++	# broken collect2.
++	hardcode_direct_F77=unsupported
++      fi
++      ;;
++
++    aix4* | aix5*)
++      if test "$host_cpu" = ia64; then
++	# On IA64, the linker does run time linking by default, so we don't
++	# have to do anything special.
++	aix_use_runtimelinking=no
++	exp_sym_flag='-Bexport'
++	no_entry_flag=""
++      else
++	# If we're using GNU nm, then we don't want the "-C" option.
++	# -C means demangle to AIX nm, but means don't demangle with GNU nm
++	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++	else
++	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++	fi
++	aix_use_runtimelinking=no
++
++	# Test if we are trying to use run time linking or normal
++	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
++	# need to do runtime linking.
++	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
++	  for ld_flag in $LDFLAGS; do
++  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++  	    aix_use_runtimelinking=yes
++  	    break
++  	  fi
++	  done
++	  ;;
++	esac
++
++	exp_sym_flag='-bexport'
++	no_entry_flag='-bnoentry'
++      fi
++
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++      archive_cmds_F77=''
++      hardcode_direct_F77=yes
++      hardcode_libdir_separator_F77=':'
++      link_all_deplibs_F77=yes
++
++      if test "$GCC" = yes; then
++	case $host_os in aix4.[012]|aix4.[012].*)
++	# We only want to do this on AIX 4.2 and lower, the check
++	# below for broken collect2 doesn't work under 4.3+
++	  collect2name=`${CC} -print-prog-name=collect2`
++	  if test -f "$collect2name" && \
++  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
++	  then
++  	  # We have reworked collect2
++  	  hardcode_direct_F77=yes
++	  else
++  	  # We have old collect2
++  	  hardcode_direct_F77=unsupported
++  	  # It fails to find uninstalled libraries when the uninstalled
++  	  # path is not listed in the libpath.  Setting hardcode_minus_L
++  	  # to unsupported forces relinking
++  	  hardcode_minus_L_F77=yes
++  	  hardcode_libdir_flag_spec_F77='-L$libdir'
++  	  hardcode_libdir_separator_F77=
++	  fi
++	  ;;
++	esac
++	shared_flag='-shared'
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag="$shared_flag "'${wl}-G'
++	fi
++      else
++	# not using gcc
++	if test "$host_cpu" = ia64; then
++  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++  	# chokes on -Wl,-G. The following line is correct:
++	  shared_flag='-G'
++	else
++	  if test "$aix_use_runtimelinking" = yes; then
++	    shared_flag='${wl}-G'
++	  else
++	    shared_flag='${wl}-bM:SRE'
++	  fi
++	fi
++      fi
++
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      always_export_symbols_F77=yes
++      if test "$aix_use_runtimelinking" = yes; then
++	# Warning - without using the other runtime loading flags (-brtl),
++	# -berok will link without error, but may produce a broken library.
++	allow_undefined_flag_F77='-berok'
++       # Determine the default libpath from the value encoded in an empty executable.
++       cat >conftest.$ac_ext <<_ACEOF
++      program main
++
++      end
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
++	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++       else
++	if test "$host_cpu" = ia64; then
++	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
++	  allow_undefined_flag_F77="-z nodefs"
++	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++	else
++	 # Determine the default libpath from the value encoded in an empty executable.
++	 cat >conftest.$ac_ext <<_ACEOF
++      program main
++
++      end
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_f77_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
++	  # Warning - without using the other run time loading flags,
++	  # -berok will link without error, but may produce a broken library.
++	  no_undefined_flag_F77=' ${wl}-bernotok'
++	  allow_undefined_flag_F77=' ${wl}-berok'
++	  # Exported symbols can be pulled into shared objects from archives
++	  whole_archive_flag_spec_F77='$convenience'
++	  archive_cmds_need_lc_F77=yes
++	  # This is similar to how AIX traditionally builds its shared libraries.
++	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++	fi
++      fi
++      ;;
++
++    amigaos*)
++      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      hardcode_minus_L_F77=yes
++      # see comment about different semantics on the GNU ld section
++      ld_shlibs_F77=no
++      ;;
++
++    bsdi[45]*)
++      export_dynamic_flag_spec_F77=-rdynamic
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      hardcode_libdir_flag_spec_F77=' '
++      allow_undefined_flag_F77=unsupported
++      # Tell ltmain to make .lib files, not .a files.
++      libext=lib
++      # Tell ltmain to make .dll files, not .so files.
++      shrext_cmds=".dll"
++      # FIXME: Setting linknames here is a bad hack.
++      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++      # The linker will automatically build a .lib file if we build a DLL.
++      old_archive_From_new_cmds_F77='true'
++      # FIXME: Should let the user specify the lib program.
++      old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
++      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
++      enable_shared_with_static_runtimes_F77=yes
++      ;;
++
++    darwin* | rhapsody*)
++      case $host_os in
++        rhapsody* | darwin1.[012])
++         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
++         ;;
++       *) # Darwin 1.3 on
++         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++         else
++           case ${MACOSX_DEPLOYMENT_TARGET} in
++             10.[012])
++               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++               ;;
++             10.*)
++               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
++               ;;
++           esac
++         fi
++         ;;
++      esac
++      archive_cmds_need_lc_F77=no
++      hardcode_direct_F77=no
++      hardcode_automatic_F77=yes
++      hardcode_shlibpath_var_F77=unsupported
++      whole_archive_flag_spec_F77=''
++      link_all_deplibs_F77=yes
++    if test "$GCC" = yes ; then
++    	output_verbose_link_cmd='echo'
++        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    else
++      case $cc_basename in
++        xlc*)
++         output_verbose_link_cmd='echo'
++         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
++         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          ;;
++       *)
++         ld_shlibs_F77=no
++          ;;
++      esac
++    fi
++      ;;
++
++    dgux*)
++      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    freebsd1*)
++      ld_shlibs_F77=no
++      ;;
++
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      hardcode_libdir_flag_spec_F77='-R$libdir'
++      hardcode_direct_F77=yes
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2*)
++      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct_F77=yes
++      hardcode_minus_L_F77=yes
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec_F77='-R$libdir'
++      hardcode_direct_F77=yes
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
++    kfreebsd*-gnu)
++      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec_F77='-R$libdir'
++      hardcode_direct_F77=yes
++      hardcode_shlibpath_var_F77=no
++      link_all_deplibs_F77=no
++      ;;
++
++    hpux9*)
++      if test "$GCC" = yes; then
++	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
++      hardcode_libdir_separator_F77=:
++      hardcode_direct_F77=yes
++
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      hardcode_minus_L_F77=yes
++      export_dynamic_flag_spec_F77='${wl}-E'
++      ;;
++
++    hpux10*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
++	hardcode_libdir_separator_F77=:
++
++	hardcode_direct_F77=yes
++	export_dynamic_flag_spec_F77='${wl}-E'
++
++	# hardcode_minus_L: Not really in the search PATH,
++	# but as the default location of the library.
++	hardcode_minus_L_F77=yes
++      fi
++      ;;
++
++    hpux11*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      else
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      fi
++      if test "$with_gnu_ld" = no; then
++	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
++	hardcode_libdir_separator_F77=:
++
++	case $host_cpu in
++	hppa*64*|ia64*)
++	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
++	  hardcode_direct_F77=no
++	  hardcode_shlibpath_var_F77=no
++	  ;;
++	*)
++	  hardcode_direct_F77=yes
++	  export_dynamic_flag_spec_F77='${wl}-E'
++
++	  # hardcode_minus_L: Not really in the search PATH,
++	  # but as the default location of the library.
++	  hardcode_minus_L_F77=yes
++	  ;;
++	esac
++      fi
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
++      fi
++      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator_F77=:
++      link_all_deplibs_F77=yes
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      hardcode_libdir_flag_spec_F77='-R$libdir'
++      hardcode_direct_F77=yes
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    newsos6)
++      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct_F77=yes
++      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator_F77=:
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    openbsd*)
++      hardcode_direct_F77=yes
++      hardcode_shlibpath_var_F77=no
++      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
++	export_dynamic_flag_spec_F77='${wl}-E'
++      else
++       case $host_os in
++	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++	   hardcode_libdir_flag_spec_F77='-R$libdir'
++	   ;;
++	 *)
++	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
++	   ;;
++       esac
++      fi
++      ;;
++
++    os2*)
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      hardcode_minus_L_F77=yes
++      allow_undefined_flag_F77=unsupported
++      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
++
++    osf3*)
++      if test "$GCC" = yes; then
++	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	allow_undefined_flag_F77=' -expect_unresolved \*'
++	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator_F77=:
++      ;;
++
++    osf4* | osf5*)	# as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
++      else
++	allow_undefined_flag_F77=' -expect_unresolved \*'
++	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
++	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
++
++	# Both c and cxx compiler support -rpath directly
++	hardcode_libdir_flag_spec_F77='-rpath $libdir'
++      fi
++      hardcode_libdir_separator_F77=:
++      ;;
++
++    solaris*)
++      no_undefined_flag_F77=' -z text'
++      if test "$GCC" = yes; then
++	wlarc='${wl}'
++	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
++      else
++	wlarc=''
++	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
++      fi
++      hardcode_libdir_flag_spec_F77='-R$libdir'
++      hardcode_shlibpath_var_F77=no
++      case $host_os in
++      solaris2.[0-5] | solaris2.[0-5].*) ;;
++      *)
++ 	# The compiler driver will combine linker options so we
++ 	# cannot just pass the convience library names through
++ 	# without $wl, iff we do not link with $LD.
++ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
++ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
++ 	case $wlarc in
++ 	'')
++ 	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
++ 	*)
++ 	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
++ 	esac ;;
++      esac
++      link_all_deplibs_F77=yes
++      ;;
++
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++	# Use $CC to link under sequent, because it throws in some extra .o
++	# files that make .init and .fini sections work.
++	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      hardcode_direct_F77=yes
++      hardcode_minus_L_F77=yes
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    sysv4)
++      case $host_vendor in
++	sni)
++	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  hardcode_direct_F77=yes # is this really true???
++	;;
++	siemens)
++	  ## LD is ld it makes a PLAMLIB
++	  ## CC just makes a GrossModule.
++	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++	  reload_cmds_F77='$CC -r -o $output$reload_objs'
++	  hardcode_direct_F77=no
++        ;;
++	motorola)
++	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
++	;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    sysv4.3*)
++      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_shlibpath_var_F77=no
++      export_dynamic_flag_spec_F77='-Bexport'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	hardcode_shlibpath_var_F77=no
++	runpath_var=LD_RUN_PATH
++	hardcode_runpath_var=yes
++	ld_shlibs_F77=yes
++      fi
++      ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
++      no_undefined_flag_F77='${wl}-z,text'
++      archive_cmds_need_lc_F77=no
++      hardcode_shlibpath_var_F77=no
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      no_undefined_flag_F77='${wl}-z,text'
++      allow_undefined_flag_F77='${wl}-z,nodefs'
++      archive_cmds_need_lc_F77=no
++      hardcode_shlibpath_var_F77=no
++      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++      hardcode_libdir_separator_F77=':'
++      link_all_deplibs_F77=yes
++      export_dynamic_flag_spec_F77='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    uts4*)
++      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec_F77='-L$libdir'
++      hardcode_shlibpath_var_F77=no
++      ;;
++
++    *)
++      ld_shlibs_F77=no
++      ;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
++echo "${ECHO_T}$ld_shlibs_F77" >&6
++test "$ld_shlibs_F77" = no && can_build_shared=no
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$archive_cmds_need_lc_F77" in
++x|xyes)
++  # Assume -lc should be added
++  archive_cmds_need_lc_F77=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $archive_cmds_F77 in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
++      $rm conftest*
++      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$lt_prog_compiler_wl_F77
++	pic_flag=$lt_prog_compiler_pic_F77
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
++        allow_undefined_flag_F77=
++        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
++  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++        then
++	  archive_cmds_need_lc_F77=no
++        else
++	  archive_cmds_need_lc_F77=yes
++        fi
++        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $rm conftest*
++      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
++      ;;
++    esac
++  fi
++  ;;
++esac
++
++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++if test "$GCC" = yes; then
++  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix4* | aix5*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[01] | aix4.[01].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++	   echo ' yes '
++	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++	:
++      else
++	can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  library_names_spec='$libname.ixlibrary $libname.a'
++  # Create ${libname}_ixlibrary.a entries in /sys/libs.
++  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[45]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $rm \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
++  if test "$GCC" = yes; then
++    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
++  else
++    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
++  fi
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++kfreebsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[123]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[01]* | freebsdelf3.[01]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
++  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  freebsd*) # from 4.6 on
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++   hppa*64*)
++     shrext_cmds='.sl'
++     hardcode_into_libs=yes
++     dynamic_linker="$host_os dld.sl"
++     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++     soname_spec='${libname}${release}${shared_ext}$major'
++     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++     ;;
++   *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix3*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++	if test "$lt_cv_prog_gnu_ld" = yes; then
++		version_type=linux
++	else
++		version_type=irix
++	fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++knetbsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++nto-qnx*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++    *)                         need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[89] | openbsd2.[89].*)
++	shlibpath_overrides_runpath=no
++	;;
++      *)
++	shlibpath_overrides_runpath=yes
++	;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      export_dynamic_flag_spec='${wl}-Blargedynsym'
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++    shlibpath_overrides_runpath=no
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    shlibpath_overrides_runpath=yes
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++	;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
++hardcode_action_F77=
++if test -n "$hardcode_libdir_flag_spec_F77" || \
++   test -n "$runpath_var_F77" || \
++   test "X$hardcode_automatic_F77" = "Xyes" ; then
++
++  # We can hardcode non-existant directories.
++  if test "$hardcode_direct_F77" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
++     test "$hardcode_minus_L_F77" != no; then
++    # Linking always hardcodes the temporary library directory.
++    hardcode_action_F77=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    hardcode_action_F77=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  hardcode_action_F77=unsupported
++fi
++echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
++echo "${ECHO_T}$hardcode_action_F77" >&6
++
++if test "$hardcode_action_F77" = relink; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++
++
++# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++  # See if we are running on zsh, and set the options which allow our commands through
++  # without removal of \ escapes.
++  if test -n "${ZSH_VERSION+set}" ; then
++    setopt NO_GLOB_SUBST
++  fi
++  # Now quote all the things that may contain metacharacters while being
++  # careful not to overquote the AC_SUBSTed values.  We take copies of the
++  # variables and quote the copies for generation of the libtool script.
++  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++    SED SHELL STRIP \
++    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++    deplibs_check_method reload_flag reload_cmds need_locks \
++    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++    lt_cv_sys_global_symbol_to_c_name_address \
++    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++    old_postinstall_cmds old_postuninstall_cmds \
++    compiler_F77 \
++    CC_F77 \
++    LD_F77 \
++    lt_prog_compiler_wl_F77 \
++    lt_prog_compiler_pic_F77 \
++    lt_prog_compiler_static_F77 \
++    lt_prog_compiler_no_builtin_flag_F77 \
++    export_dynamic_flag_spec_F77 \
++    thread_safe_flag_spec_F77 \
++    whole_archive_flag_spec_F77 \
++    enable_shared_with_static_runtimes_F77 \
++    old_archive_cmds_F77 \
++    old_archive_from_new_cmds_F77 \
++    predep_objects_F77 \
++    postdep_objects_F77 \
++    predeps_F77 \
++    postdeps_F77 \
++    compiler_lib_search_path_F77 \
++    archive_cmds_F77 \
++    archive_expsym_cmds_F77 \
++    postinstall_cmds_F77 \
++    postuninstall_cmds_F77 \
++    old_archive_from_expsyms_cmds_F77 \
++    allow_undefined_flag_F77 \
++    no_undefined_flag_F77 \
++    export_symbols_cmds_F77 \
++    hardcode_libdir_flag_spec_F77 \
++    hardcode_libdir_flag_spec_ld_F77 \
++    hardcode_libdir_separator_F77 \
++    hardcode_automatic_F77 \
++    module_cmds_F77 \
++    module_expsym_cmds_F77 \
++    lt_cv_prog_compiler_c_o_F77 \
++    exclude_expsyms_F77 \
++    include_expsyms_F77; do
++
++    case $var in
++    old_archive_cmds_F77 | \
++    old_archive_from_new_cmds_F77 | \
++    archive_cmds_F77 | \
++    archive_expsym_cmds_F77 | \
++    module_cmds_F77 | \
++    module_expsym_cmds_F77 | \
++    old_archive_from_expsyms_cmds_F77 | \
++    export_symbols_cmds_F77 | \
++    extract_expsyms_cmds | reload_cmds | finish_cmds | \
++    postinstall_cmds | postuninstall_cmds | \
++    old_postinstall_cmds | old_postuninstall_cmds | \
++    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++      # Double-quote double-evaled strings.
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++      ;;
++    *)
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++      ;;
++    esac
++  done
++
++  case $lt_echo in
++  *'\$0 --fallback-echo"')
++    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
++    ;;
++  esac
++
++cfgfile="$ofile"
++
++  cat <<__EOF__ >> "$cfgfile"
++# ### BEGIN LIBTOOL TAG CONFIG: $tagname
++
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$archive_cmds_need_lc_F77
++
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
++
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
++
++# A C compiler.
++LTCC=$lt_LTCC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
++# A language-specific compiler.
++CC=$lt_compiler_F77
++
++# Is the compiler the GNU C compiler?
++with_gcc=$GCC_F77
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# The linker used to build libraries.
++LD=$lt_LD_F77
++
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
++
++# A BSD-compatible nm program.
++NM=$lt_NM
++
++# A symbol stripping program
++STRIP=$lt_STRIP
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
++
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
++
++# Used on cygwin: assembler.
++AS="$AS"
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl_F77
++
++# Object file suffix (normally "o").
++objext="$ac_objext"
++
++# Old archive suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
++
++# Executable file suffix (normally "").
++exeext="$exeext"
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_lt_prog_compiler_pic_F77
++pic_mode=$pic_mode
++
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_lt_prog_compiler_static_F77
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
++
++# Library versioning type.
++version_type=$version_type
++
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
++
++# List of archive names.  First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
++
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
++
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_old_archive_cmds_F77
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
++
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_archive_cmds_F77
++archive_expsym_cmds=$lt_archive_expsym_cmds_F77
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
++
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_module_cmds_F77
++module_expsym_cmds=$lt_module_expsym_cmds_F77
++
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_predep_objects_F77
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_postdep_objects_F77
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_predeps_F77
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_postdeps_F77
++
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_compiler_lib_search_path_F77
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_allow_undefined_flag_F77
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_no_undefined_flag_F77
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
++
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$hardcode_action_F77
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
++
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
++
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$hardcode_direct_F77
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$hardcode_minus_L_F77
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
++
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$hardcode_automatic_F77
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$link_all_deplibs_F77
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path="$fix_srcfile_path_F77"
++
++# Set to yes if exported symbols are required.
++always_export_symbols=$always_export_symbols_F77
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_export_symbols_cmds_F77
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_exclude_expsyms_F77
++
++# Symbols that must always be exported.
++include_expsyms=$lt_include_expsyms_F77
++
++# ### END LIBTOOL TAG CONFIG: $tagname
++
++__EOF__
++
++
++else
++  # If there is no Makefile yet, we rely on a make rule to execute
++  # `config.status --recheck' to rerun these tests and create the
++  # libtool script then.
++  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++  if test -f "$ltmain_in"; then
++    test -f Makefile && make "$ltmain"
++  fi
++fi
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++CC="$lt_save_CC"
++
++	else
++	  tagname=""
++	fi
++	;;
++
++      GCJ)
++	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
++
++
++
++# Source file extension for Java test sources.
++ac_ext=java
++
++# Object file extension for compiled Java test sources.
++objext=o
++objext_GCJ=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code="class foo {}\n"
++
++# Code to be used in simple link tests
++lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${GCJ-"gcj"}
++compiler=$CC
++compiler_GCJ=$CC
++for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++
++# GCJ did not exist at the time GCC didn't implicitly link libc in.
++archive_cmds_need_lc_GCJ=no
++
++old_archive_cmds_GCJ=$old_archive_cmds
++
++
++lt_prog_compiler_no_builtin_flag_GCJ=
++
++if test "$GCC" = yes; then
++  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
++
++
++echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_prog_compiler_rtti_exceptions=no
++  ac_outfile=conftest.$ac_objext
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="-fno-rtti -fno-exceptions"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:15839: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:15843: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_rtti_exceptions=yes
++     fi
++   fi
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
++
++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
++    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
++else
++    :
++fi
++
++fi
++
++lt_prog_compiler_wl_GCJ=
++lt_prog_compiler_pic_GCJ=
++lt_prog_compiler_static_GCJ=
++
++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
++
++  if test "$GCC" = yes; then
++    lt_prog_compiler_wl_GCJ='-Wl,'
++    lt_prog_compiler_static_GCJ='-static'
++
++    case $host_os in
++      aix*)
++      # All AIX code is PIC.
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static_GCJ='-Bstatic'
++      fi
++      ;;
++
++    amigaos*)
++      # FIXME: we need at least 68020 code to build shared libraries, but
++      # adding the `-m68020' flag to GCC prevents building anything better,
++      # like `-m68040'.
++      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
++      ;;
++
++    beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
++      # PIC is the default for these OSes.
++      ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
++      ;;
++
++    darwin* | rhapsody*)
++      # PIC is the default on this platform
++      # Common symbols not allowed in MH_DYLIB files
++      lt_prog_compiler_pic_GCJ='-fno-common'
++      ;;
++
++    interix3*)
++      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
++      # Instead, we relocate shared libraries at runtime.
++      ;;
++
++    msdosdjgpp*)
++      # Just because we use GCC doesn't mean we suddenly get shared libraries
++      # on systems that don't support them.
++      lt_prog_compiler_can_build_shared_GCJ=no
++      enable_shared=no
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	lt_prog_compiler_pic_GCJ=-Kconform_pic
++      fi
++      ;;
++
++    hpux*)
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	lt_prog_compiler_pic_GCJ='-fPIC'
++	;;
++      esac
++      ;;
++
++    *)
++      lt_prog_compiler_pic_GCJ='-fPIC'
++      ;;
++    esac
++  else
++    # PORTME Check for flag to pass linker flags through the system compiler.
++    case $host_os in
++    aix*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      if test "$host_cpu" = ia64; then
++	# AIX 5 now supports IA64 processor
++	lt_prog_compiler_static_GCJ='-Bstatic'
++      else
++	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
++      fi
++      ;;
++      darwin*)
++        # PIC is the default on this platform
++        # Common symbols not allowed in MH_DYLIB files
++       case $cc_basename in
++         xlc*)
++         lt_prog_compiler_pic_GCJ='-qnocommon'
++         lt_prog_compiler_wl_GCJ='-Wl,'
++         ;;
++       esac
++       ;;
++
++    mingw* | pw32* | os2*)
++      # This hack is so that the source file can tell whether it is being
++      # built for inclusion in a dll (and should export symbols for example).
++      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
++      ;;
++
++    hpux9* | hpux10* | hpux11*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
++      # not for PA HP-UX.
++      case $host_cpu in
++      hppa*64*|ia64*)
++	# +Z the default
++	;;
++      *)
++	lt_prog_compiler_pic_GCJ='+Z'
++	;;
++      esac
++      # Is there a better lt_prog_compiler_static that works with the bundled CC?
++      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      # PIC (with -KPIC) is the default.
++      lt_prog_compiler_static_GCJ='-non_shared'
++      ;;
++
++    newsos6)
++      lt_prog_compiler_pic_GCJ='-KPIC'
++      lt_prog_compiler_static_GCJ='-Bstatic'
++      ;;
++
++    linux*)
++      case $cc_basename in
++      icc* | ecc*)
++	lt_prog_compiler_wl_GCJ='-Wl,'
++	lt_prog_compiler_pic_GCJ='-KPIC'
++	lt_prog_compiler_static_GCJ='-static'
++        ;;
++      pgcc* | pgf77* | pgf90* | pgf95*)
++        # Portland Group compilers (*not* the Pentium gcc compiler,
++	# which looks to be a dead project)
++	lt_prog_compiler_wl_GCJ='-Wl,'
++	lt_prog_compiler_pic_GCJ='-fpic'
++	lt_prog_compiler_static_GCJ='-Bstatic'
++        ;;
++      ccc*)
++        lt_prog_compiler_wl_GCJ='-Wl,'
++        # All Alpha code is PIC.
++        lt_prog_compiler_static_GCJ='-non_shared'
++        ;;
++      esac
++      ;;
++
++    osf3* | osf4* | osf5*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      # All OSF/1 code is PIC.
++      lt_prog_compiler_static_GCJ='-non_shared'
++      ;;
++
++    solaris*)
++      lt_prog_compiler_pic_GCJ='-KPIC'
++      lt_prog_compiler_static_GCJ='-Bstatic'
++      case $cc_basename in
++      f77* | f90* | f95*)
++	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
++      *)
++	lt_prog_compiler_wl_GCJ='-Wl,';;
++      esac
++      ;;
++
++    sunos4*)
++      lt_prog_compiler_wl_GCJ='-Qoption ld '
++      lt_prog_compiler_pic_GCJ='-PIC'
++      lt_prog_compiler_static_GCJ='-Bstatic'
++      ;;
++
++    sysv4 | sysv4.2uw2* | sysv4.3*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      lt_prog_compiler_pic_GCJ='-KPIC'
++      lt_prog_compiler_static_GCJ='-Bstatic'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec ;then
++	lt_prog_compiler_pic_GCJ='-Kconform_pic'
++	lt_prog_compiler_static_GCJ='-Bstatic'
++      fi
++      ;;
++
++    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      lt_prog_compiler_pic_GCJ='-KPIC'
++      lt_prog_compiler_static_GCJ='-Bstatic'
++      ;;
++
++    unicos*)
++      lt_prog_compiler_wl_GCJ='-Wl,'
++      lt_prog_compiler_can_build_shared_GCJ=no
++      ;;
++
++    uts4*)
++      lt_prog_compiler_pic_GCJ='-pic'
++      lt_prog_compiler_static_GCJ='-Bstatic'
++      ;;
++
++    *)
++      lt_prog_compiler_can_build_shared_GCJ=no
++      ;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
++
++#
++# Check to make sure the PIC flag actually works.
++#
++if test -n "$lt_prog_compiler_pic_GCJ"; then
++
++echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
++if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_pic_works_GCJ=no
++  ac_outfile=conftest.$ac_objext
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:16107: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&5
++   echo "$as_me:16111: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       lt_prog_compiler_pic_works_GCJ=yes
++     fi
++   fi
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
++echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
++
++if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
++    case $lt_prog_compiler_pic_GCJ in
++     "" | " "*) ;;
++     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
++     esac
++else
++    lt_prog_compiler_pic_GCJ=
++     lt_prog_compiler_can_build_shared_GCJ=no
++fi
++
++fi
++case $host_os in
++  # For platforms which do not support PIC, -DPIC is meaningless:
++  *djgpp*)
++    lt_prog_compiler_pic_GCJ=
++    ;;
++  *)
++    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
++    ;;
++esac
++
++#
++# Check to make sure the static flag actually works.
++#
++wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
++echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
++if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_prog_compiler_static_works_GCJ=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
++   printf "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&5
++       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         lt_prog_compiler_static_works_GCJ=yes
++       fi
++     else
++       lt_prog_compiler_static_works_GCJ=yes
++     fi
++   fi
++   $rm conftest*
++   LDFLAGS="$save_LDFLAGS"
++
++fi
++echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
++echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
++
++if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
++    :
++else
++    lt_prog_compiler_static_GCJ=
++fi
++
++
++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
++if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  lt_cv_prog_compiler_c_o_GCJ=no
++   $rm -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:16211: $lt_compile\"" >&5)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&5
++   echo "$as_me:16215: \$? = $ac_status" >&5
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       lt_cv_prog_compiler_c_o_GCJ=yes
++     fi
++   fi
++   chmod u+w . 2>&5
++   $rm conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++   $rm out/* && rmdir out
++   cd ..
++   rmdir conftest
++   $rm conftest*
++
++fi
++echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
++
++
++hard_links="nottested"
++if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
++  hard_links=yes
++  $rm conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6
++  if test "$hard_links" = no; then
++    { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++
++echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
++
++  runpath_var=
++  allow_undefined_flag_GCJ=
++  enable_shared_with_static_runtimes_GCJ=no
++  archive_cmds_GCJ=
++  archive_expsym_cmds_GCJ=
++  old_archive_From_new_cmds_GCJ=
++  old_archive_from_expsyms_cmds_GCJ=
++  export_dynamic_flag_spec_GCJ=
++  whole_archive_flag_spec_GCJ=
++  thread_safe_flag_spec_GCJ=
++  hardcode_libdir_flag_spec_GCJ=
++  hardcode_libdir_flag_spec_ld_GCJ=
++  hardcode_libdir_separator_GCJ=
++  hardcode_direct_GCJ=no
++  hardcode_minus_L_GCJ=no
++  hardcode_shlibpath_var_GCJ=unsupported
++  link_all_deplibs_GCJ=unknown
++  hardcode_automatic_GCJ=no
++  module_cmds_GCJ=
++  module_expsym_cmds_GCJ=
++  always_export_symbols_GCJ=no
++  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
++  # include_expsyms should be a list of space-separated symbols to be *always*
++  # included in the symbol list
++  include_expsyms_GCJ=
++  # exclude_expsyms can be an extended regexp of symbols to exclude
++  # it will be wrapped by ` (' and `)$', so one must not match beginning or
++  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
++  # as well as any symbol that contains `d'.
++  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
++  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
++  # platforms (ab)use it in PIC code, but their linkers get confused if
++  # the symbol is explicitly referenced.  Since portable code cannot
++  # rely on this symbol name, it's probably fine to never include it in
++  # preloaded symbol tables.
++  extract_expsyms_cmds=
++  # Just being paranoid about ensuring that cc_basename is set.
++  for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++  case $host_os in
++  cygwin* | mingw* | pw32*)
++    # FIXME: the MSVC++ port hasn't been tested in a loooong time
++    # When not using gcc, we currently assume that we are using
++    # Microsoft Visual C++.
++    if test "$GCC" != yes; then
++      with_gnu_ld=no
++    fi
++    ;;
++  interix*)
++    # we just hope/assume this is gcc and not c89 (= MSVC++)
++    with_gnu_ld=yes
++    ;;
++  openbsd*)
++    with_gnu_ld=no
++    ;;
++  esac
++
++  ld_shlibs_GCJ=yes
++  if test "$with_gnu_ld" = yes; then
++    # If archive_cmds runs LD, not CC, wlarc should be empty
++    wlarc='${wl}'
++
++    # Set some defaults for GNU ld with shared library support. These
++    # are reset later if shared libraries are not supported. Putting them
++    # here allows them to be overridden if necessary.
++    runpath_var=LD_RUN_PATH
++    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
++    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
++    # ancient GNU ld didn't support --whole-archive et. al.
++    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
++	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
++      else
++  	whole_archive_flag_spec_GCJ=
++    fi
++    supports_anon_versioning=no
++    case `$LD -v 2>/dev/null` in
++      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
++      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
++      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
++      *\ 2.11.*) ;; # other 2.11 versions
++      *) supports_anon_versioning=yes ;;
++    esac
++
++    # See if GNU ld supports shared libraries.
++    case $host_os in
++    aix3* | aix4* | aix5*)
++      # On AIX/PPC, the GNU linker is very broken
++      if test "$host_cpu" != ia64; then
++	ld_shlibs_GCJ=no
++	cat <<EOF 1>&2
++
++*** Warning: the GNU linker, at least up to release 2.9.1, is reported
++*** to be unable to reliably create shared libraries on AIX.
++*** Therefore, libtool is disabling shared libraries support.  If you
++*** really care for shared libraries, you may want to modify your PATH
++*** so that a non-GNU linker is found, and then restart.
++
++EOF
++      fi
++      ;;
++
++    amigaos*)
++      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      hardcode_minus_L_GCJ=yes
++
++      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
++      # that the semantics of dynamic libraries on AmigaOS, at least up
++      # to version 4, is to share data among multiple programs linked
++      # with the same dynamic library.  Since this doesn't match the
++      # behavior of shared libraries on other platforms, we can't use
++      # them.
++      ld_shlibs_GCJ=no
++      ;;
++
++    beos*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	allow_undefined_flag_GCJ=unsupported
++	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
++	# support --undefined.  This deserves some investigation.  FIXME
++	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++      else
++	ld_shlibs_GCJ=no
++      fi
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
++      # as there is no search path for DLLs.
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      allow_undefined_flag_GCJ=unsupported
++      always_export_symbols_GCJ=no
++      enable_shared_with_static_runtimes_GCJ=yes
++      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
++
++      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
++        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++	# If the export-symbols file already is a .def file (1st line
++	# is EXPORTS), use it as is; otherwise, prepend...
++	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
++	  cp $export_symbols $output_objdir/$soname.def;
++	else
++	  echo EXPORTS > $output_objdir/$soname.def;
++	  cat $export_symbols >> $output_objdir/$soname.def;
++	fi~
++	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
++      else
++	ld_shlibs_GCJ=no
++      fi
++      ;;
++
++    interix3*)
++      hardcode_direct_GCJ=no
++      hardcode_shlibpath_var_GCJ=no
++      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
++      export_dynamic_flag_spec_GCJ='${wl}-E'
++      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
++      # Instead, shared libraries are loaded at an image base (0x10000000 by
++      # default) and relocated if they conflict, which is a slow very memory
++      # consuming and fragmenting process.  To avoid this, we pick a random,
++      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
++      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
++      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
++      ;;
++
++    linux*)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	tmp_addflag=
++	case $cc_basename,$host_cpu in
++	pgcc*)				# Portland Group C compiler
++	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag'
++	  ;;
++	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
++	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
++	  tmp_addflag=' $pic_flag -Mnomain' ;;
++	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
++	  tmp_addflag=' -i_dynamic' ;;
++	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
++	  tmp_addflag=' -i_dynamic -nofor_main' ;;
++	ifc* | ifort*)			# Intel Fortran compiler
++	  tmp_addflag=' -nofor_main' ;;
++	esac
++	archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++
++	if test $supports_anon_versioning = yes; then
++	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
++  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
++  $echo "local: *; };" >> $output_objdir/$libname.ver~
++	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
++	fi
++	link_all_deplibs_GCJ=no
++      else
++	ld_shlibs_GCJ=no
++      fi
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
++	wlarc=
++      else
++	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      fi
++      ;;
++
++    solaris*)
++      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
++	ld_shlibs_GCJ=no
++	cat <<EOF 1>&2
++
++*** Warning: The releases 2.8.* of the GNU linker cannot reliably
++*** create shared libraries on Solaris systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.9.1 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++EOF
++      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	ld_shlibs_GCJ=no
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
++      case `$LD -v 2>&1` in
++        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
++	ld_shlibs_GCJ=no
++	cat <<_LT_EOF 1>&2
++
++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
++*** reliably create shared libraries on SCO systems.  Therefore, libtool
++*** is disabling shared libraries support.  We urge you to upgrade GNU
++*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
++*** your PATH or compiler configuration so that the native linker is
++*** used, and then restart.
++
++_LT_EOF
++	;;
++	*)
++	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
++	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
++	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
++	  else
++	    ld_shlibs_GCJ=no
++	  fi
++	;;
++      esac
++      ;;
++
++    sunos4*)
++      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      wlarc=
++      hardcode_direct_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    *)
++      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
++	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
++	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
++      else
++	ld_shlibs_GCJ=no
++      fi
++      ;;
++    esac
++
++    if test "$ld_shlibs_GCJ" = no; then
++      runpath_var=
++      hardcode_libdir_flag_spec_GCJ=
++      export_dynamic_flag_spec_GCJ=
++      whole_archive_flag_spec_GCJ=
++    fi
++  else
++    # PORTME fill in a description of your system's linker (not GNU ld)
++    case $host_os in
++    aix3*)
++      allow_undefined_flag_GCJ=unsupported
++      always_export_symbols_GCJ=yes
++      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
++      # Note: this linker hardcodes the directories in LIBPATH if there
++      # are no directories specified by -L.
++      hardcode_minus_L_GCJ=yes
++      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
++	# Neither direct hardcoding nor static linking is supported with a
++	# broken collect2.
++	hardcode_direct_GCJ=unsupported
++      fi
++      ;;
++
++    aix4* | aix5*)
++      if test "$host_cpu" = ia64; then
++	# On IA64, the linker does run time linking by default, so we don't
++	# have to do anything special.
++	aix_use_runtimelinking=no
++	exp_sym_flag='-Bexport'
++	no_entry_flag=""
++      else
++	# If we're using GNU nm, then we don't want the "-C" option.
++	# -C means demangle to AIX nm, but means don't demangle with GNU nm
++	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
++	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++	else
++	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
++	fi
++	aix_use_runtimelinking=no
++
++	# Test if we are trying to use run time linking or normal
++	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
++	# need to do runtime linking.
++	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
++	  for ld_flag in $LDFLAGS; do
++  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
++  	    aix_use_runtimelinking=yes
++  	    break
++  	  fi
++	  done
++	  ;;
++	esac
++
++	exp_sym_flag='-bexport'
++	no_entry_flag='-bnoentry'
++      fi
++
++      # When large executables or shared objects are built, AIX ld can
++      # have problems creating the table of contents.  If linking a library
++      # or program results in "error TOC overflow" add -mminimal-toc to
++      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
++      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
++
++      archive_cmds_GCJ=''
++      hardcode_direct_GCJ=yes
++      hardcode_libdir_separator_GCJ=':'
++      link_all_deplibs_GCJ=yes
++
++      if test "$GCC" = yes; then
++	case $host_os in aix4.[012]|aix4.[012].*)
++	# We only want to do this on AIX 4.2 and lower, the check
++	# below for broken collect2 doesn't work under 4.3+
++	  collect2name=`${CC} -print-prog-name=collect2`
++	  if test -f "$collect2name" && \
++  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
++	  then
++  	  # We have reworked collect2
++  	  hardcode_direct_GCJ=yes
++	  else
++  	  # We have old collect2
++  	  hardcode_direct_GCJ=unsupported
++  	  # It fails to find uninstalled libraries when the uninstalled
++  	  # path is not listed in the libpath.  Setting hardcode_minus_L
++  	  # to unsupported forces relinking
++  	  hardcode_minus_L_GCJ=yes
++  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
++  	  hardcode_libdir_separator_GCJ=
++	  fi
++	  ;;
++	esac
++	shared_flag='-shared'
++	if test "$aix_use_runtimelinking" = yes; then
++	  shared_flag="$shared_flag "'${wl}-G'
++	fi
++      else
++	# not using gcc
++	if test "$host_cpu" = ia64; then
++  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
++  	# chokes on -Wl,-G. The following line is correct:
++	  shared_flag='-G'
++	else
++	  if test "$aix_use_runtimelinking" = yes; then
++	    shared_flag='${wl}-G'
++	  else
++	    shared_flag='${wl}-bM:SRE'
++	  fi
++	fi
++      fi
++
++      # It seems that -bexpall does not export symbols beginning with
++      # underscore (_), so it is better to generate a list of symbols to export.
++      always_export_symbols_GCJ=yes
++      if test "$aix_use_runtimelinking" = yes; then
++	# Warning - without using the other runtime loading flags (-brtl),
++	# -berok will link without error, but may produce a broken library.
++	allow_undefined_flag_GCJ='-berok'
++       # Determine the default libpath from the value encoded in an empty executable.
++       cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
++	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
++       else
++	if test "$host_cpu" = ia64; then
++	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
++	  allow_undefined_flag_GCJ="-z nodefs"
++	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
++	else
++	 # Determine the default libpath from the value encoded in an empty executable.
++	 cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h.  */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h.  */
++
++int
++main ()
++{
++
++  ;
++  return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
++  ac_status=$?
++  grep -v '^ *+' conftest.er1 >conftest.err
++  rm -f conftest.er1
++  cat conftest.err >&5
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; }; then
++
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi
++else
++  echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++
++	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
++	  # Warning - without using the other run time loading flags,
++	  # -berok will link without error, but may produce a broken library.
++	  no_undefined_flag_GCJ=' ${wl}-bernotok'
++	  allow_undefined_flag_GCJ=' ${wl}-berok'
++	  # Exported symbols can be pulled into shared objects from archives
++	  whole_archive_flag_spec_GCJ='$convenience'
++	  archive_cmds_need_lc_GCJ=yes
++	  # This is similar to how AIX traditionally builds its shared libraries.
++	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
++	fi
++      fi
++      ;;
++
++    amigaos*)
++      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      hardcode_minus_L_GCJ=yes
++      # see comment about different semantics on the GNU ld section
++      ld_shlibs_GCJ=no
++      ;;
++
++    bsdi[45]*)
++      export_dynamic_flag_spec_GCJ=-rdynamic
++      ;;
++
++    cygwin* | mingw* | pw32*)
++      # When not using gcc, we currently assume that we are using
++      # Microsoft Visual C++.
++      # hardcode_libdir_flag_spec is actually meaningless, as there is
++      # no search path for DLLs.
++      hardcode_libdir_flag_spec_GCJ=' '
++      allow_undefined_flag_GCJ=unsupported
++      # Tell ltmain to make .lib files, not .a files.
++      libext=lib
++      # Tell ltmain to make .dll files, not .so files.
++      shrext_cmds=".dll"
++      # FIXME: Setting linknames here is a bad hack.
++      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
++      # The linker will automatically build a .lib file if we build a DLL.
++      old_archive_From_new_cmds_GCJ='true'
++      # FIXME: Should let the user specify the lib program.
++      old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
++      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
++      enable_shared_with_static_runtimes_GCJ=yes
++      ;;
++
++    darwin* | rhapsody*)
++      case $host_os in
++        rhapsody* | darwin1.[012])
++         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
++         ;;
++       *) # Darwin 1.3 on
++         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
++           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++         else
++           case ${MACOSX_DEPLOYMENT_TARGET} in
++             10.[012])
++               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
++               ;;
++             10.*)
++               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
++               ;;
++           esac
++         fi
++         ;;
++      esac
++      archive_cmds_need_lc_GCJ=no
++      hardcode_direct_GCJ=no
++      hardcode_automatic_GCJ=yes
++      hardcode_shlibpath_var_GCJ=unsupported
++      whole_archive_flag_spec_GCJ=''
++      link_all_deplibs_GCJ=yes
++    if test "$GCC" = yes ; then
++    	output_verbose_link_cmd='echo'
++        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
++      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++    else
++      case $cc_basename in
++        xlc*)
++         output_verbose_link_cmd='echo'
++         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
++         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
++          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
++         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
++          ;;
++       *)
++         ld_shlibs_GCJ=no
++          ;;
++      esac
++    fi
++      ;;
++
++    dgux*)
++      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    freebsd1*)
++      ld_shlibs_GCJ=no
++      ;;
++
++    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
++    # support.  Future versions do this automatically, but an explicit c++rt0.o
++    # does not break anything, and helps significantly (at the cost of a little
++    # extra space).
++    freebsd2.2*)
++      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
++      hardcode_libdir_flag_spec_GCJ='-R$libdir'
++      hardcode_direct_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
++    freebsd2*)
++      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct_GCJ=yes
++      hardcode_minus_L_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
++    freebsd* | dragonfly*)
++      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec_GCJ='-R$libdir'
++      hardcode_direct_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    # GNU/kFreeBSD uses gcc -shared to do shared libraries.
++    kfreebsd*-gnu)
++      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
++      hardcode_libdir_flag_spec_GCJ='-R$libdir'
++      hardcode_direct_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      link_all_deplibs_GCJ=no
++      ;;
++
++    hpux9*)
++      if test "$GCC" = yes; then
++	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      else
++	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
++      fi
++      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
++      hardcode_libdir_separator_GCJ=:
++      hardcode_direct_GCJ=yes
++
++      # hardcode_minus_L: Not really in the search PATH,
++      # but as the default location of the library.
++      hardcode_minus_L_GCJ=yes
++      export_dynamic_flag_spec_GCJ='${wl}-E'
++      ;;
++
++    hpux10*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      if test "$with_gnu_ld" = no; then
++	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
++	hardcode_libdir_separator_GCJ=:
++
++	hardcode_direct_GCJ=yes
++	export_dynamic_flag_spec_GCJ='${wl}-E'
++
++	# hardcode_minus_L: Not really in the search PATH,
++	# but as the default location of the library.
++	hardcode_minus_L_GCJ=yes
++      fi
++      ;;
++
++    hpux11*)
++      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      else
++	case $host_cpu in
++	hppa*64*)
++	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	ia64*)
++	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	*)
++	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
++	  ;;
++	esac
++      fi
++      if test "$with_gnu_ld" = no; then
++	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
++	hardcode_libdir_separator_GCJ=:
++
++	case $host_cpu in
++	hppa*64*|ia64*)
++	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
++	  hardcode_direct_GCJ=no
++	  hardcode_shlibpath_var_GCJ=no
++	  ;;
++	*)
++	  hardcode_direct_GCJ=yes
++	  export_dynamic_flag_spec_GCJ='${wl}-E'
++
++	  # hardcode_minus_L: Not really in the search PATH,
++	  # but as the default location of the library.
++	  hardcode_minus_L_GCJ=yes
++	  ;;
++	esac
++      fi
++      ;;
++
++    irix5* | irix6* | nonstopux*)
++      if test "$GCC" = yes; then
++	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
++      fi
++      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator_GCJ=:
++      link_all_deplibs_GCJ=yes
++      ;;
++
++    netbsd* | netbsdelf*-gnu | knetbsd*-gnu)
++      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
++      else
++	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
++      fi
++      hardcode_libdir_flag_spec_GCJ='-R$libdir'
++      hardcode_direct_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    newsos6)
++      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_direct_GCJ=yes
++      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator_GCJ=:
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    openbsd*)
++      hardcode_direct_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
++	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
++	export_dynamic_flag_spec_GCJ='${wl}-E'
++      else
++       case $host_os in
++	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
++	   ;;
++	 *)
++	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
++	   ;;
++       esac
++      fi
++      ;;
++
++    os2*)
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      hardcode_minus_L_GCJ=yes
++      allow_undefined_flag_GCJ=unsupported
++      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
++      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
++      ;;
++
++    osf3*)
++      if test "$GCC" = yes; then
++	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++      else
++	allow_undefined_flag_GCJ=' -expect_unresolved \*'
++	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++      fi
++      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
++      hardcode_libdir_separator_GCJ=:
++      ;;
++
++    osf4* | osf5*)	# as osf3* with the addition of -msym flag
++      if test "$GCC" = yes; then
++	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
++	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
++      else
++	allow_undefined_flag_GCJ=' -expect_unresolved \*'
++	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
++	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
++
++	# Both c and cxx compiler support -rpath directly
++	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
++      fi
++      hardcode_libdir_separator_GCJ=:
++      ;;
++
++    solaris*)
++      no_undefined_flag_GCJ=' -z text'
++      if test "$GCC" = yes; then
++	wlarc='${wl}'
++	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
++      else
++	wlarc=''
++	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
++  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
++      fi
++      hardcode_libdir_flag_spec_GCJ='-R$libdir'
++      hardcode_shlibpath_var_GCJ=no
++      case $host_os in
++      solaris2.[0-5] | solaris2.[0-5].*) ;;
++      *)
++ 	# The compiler driver will combine linker options so we
++ 	# cannot just pass the convience library names through
++ 	# without $wl, iff we do not link with $LD.
++ 	# Luckily, gcc supports the same syntax we need for Sun Studio.
++ 	# Supported since Solaris 2.6 (maybe 2.5.1?)
++ 	case $wlarc in
++ 	'')
++ 	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
++ 	*)
++ 	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
++ 	esac ;;
++      esac
++      link_all_deplibs_GCJ=yes
++      ;;
++
++    sunos4*)
++      if test "x$host_vendor" = xsequent; then
++	# Use $CC to link under sequent, because it throws in some extra .o
++	# files that make .init and .fini sections work.
++	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
++      fi
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      hardcode_direct_GCJ=yes
++      hardcode_minus_L_GCJ=yes
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    sysv4)
++      case $host_vendor in
++	sni)
++	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  hardcode_direct_GCJ=yes # is this really true???
++	;;
++	siemens)
++	  ## LD is ld it makes a PLAMLIB
++	  ## CC just makes a GrossModule.
++	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
++	  hardcode_direct_GCJ=no
++        ;;
++	motorola)
++	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
++	;;
++      esac
++      runpath_var='LD_RUN_PATH'
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    sysv4.3*)
++      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_shlibpath_var_GCJ=no
++      export_dynamic_flag_spec_GCJ='-Bexport'
++      ;;
++
++    sysv4*MP*)
++      if test -d /usr/nec; then
++	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++	hardcode_shlibpath_var_GCJ=no
++	runpath_var=LD_RUN_PATH
++	hardcode_runpath_var=yes
++	ld_shlibs_GCJ=yes
++      fi
++      ;;
++
++    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
++      no_undefined_flag_GCJ='${wl}-z,text'
++      archive_cmds_need_lc_GCJ=no
++      hardcode_shlibpath_var_GCJ=no
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    sysv5* | sco3.2v5* | sco5v6*)
++      # Note: We can NOT use -z defs as we might desire, because we do not
++      # link with -lc, and that would cause any symbols used from libc to
++      # always be unresolved, which means just about no library would
++      # ever link correctly.  If we're not using GNU ld we use -z text
++      # though, which does catch some bad symbols but isn't as heavy-handed
++      # as -z defs.
++      no_undefined_flag_GCJ='${wl}-z,text'
++      allow_undefined_flag_GCJ='${wl}-z,nodefs'
++      archive_cmds_need_lc_GCJ=no
++      hardcode_shlibpath_var_GCJ=no
++      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
++      hardcode_libdir_separator_GCJ=':'
++      link_all_deplibs_GCJ=yes
++      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
++      runpath_var='LD_RUN_PATH'
++
++      if test "$GCC" = yes; then
++	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      else
++	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
++      fi
++      ;;
++
++    uts4*)
++      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++      hardcode_libdir_flag_spec_GCJ='-L$libdir'
++      hardcode_shlibpath_var_GCJ=no
++      ;;
++
++    *)
++      ld_shlibs_GCJ=no
++      ;;
++    esac
++  fi
++
++echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
++echo "${ECHO_T}$ld_shlibs_GCJ" >&6
++test "$ld_shlibs_GCJ" = no && can_build_shared=no
++
++#
++# Do we need to explicitly link libc?
++#
++case "x$archive_cmds_need_lc_GCJ" in
++x|xyes)
++  # Assume -lc should be added
++  archive_cmds_need_lc_GCJ=yes
++
++  if test "$enable_shared" = yes && test "$GCC" = yes; then
++    case $archive_cmds_GCJ in
++    *'~'*)
++      # FIXME: we may have to deal with multi-command sequences.
++      ;;
++    '$CC '*)
++      # Test whether the compiler implicitly links with -lc since on some
++      # systems, -lgcc has to come before -lc. If gcc already passes -lc
++      # to ld, don't add -lc before -lgcc.
++      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
++      $rm conftest*
++      printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++  (eval $ac_compile) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); } 2>conftest.err; then
++        soname=conftest
++        lib=conftest
++        libobjs=conftest.$ac_objext
++        deplibs=
++        wl=$lt_prog_compiler_wl_GCJ
++	pic_flag=$lt_prog_compiler_pic_GCJ
++        compiler_flags=-v
++        linker_flags=-v
++        verstring=
++        output_objdir=.
++        libname=conftest
++        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
++        allow_undefined_flag_GCJ=
++        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
++  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }
++        then
++	  archive_cmds_need_lc_GCJ=no
++        else
++	  archive_cmds_need_lc_GCJ=yes
++        fi
++        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
++      else
++        cat conftest.err 1>&5
++      fi
++      $rm conftest*
++      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
++      ;;
++    esac
++  fi
++  ;;
++esac
++
++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++if test "$GCC" = yes; then
++  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix4* | aix5*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++    # the line `#! .'.  This would cause the generated library to
++    # depend on `.', always an invalid library.  This was fixed in
++    # development snapshots of GCC prior to 3.0.
++    case $host_os in
++      aix4 | aix4.[01] | aix4.[01].*)
++      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++	   echo ' yes '
++	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++	:
++      else
++	can_build_shared=no
++      fi
++      ;;
++    esac
++    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
++    # soname into executable. Probably we can add versioning support to
++    # collect2, so additional links can be useful in future.
++    if test "$aix_use_runtimelinking" = yes; then
++      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++      # instead of lib<name>.a to let people know that these are not
++      # typical AIX shared libraries.
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    else
++      # We preserve .a as extension for shared libraries through AIX4.2
++      # and later when we are not doing run time linking.
++      library_names_spec='${libname}${release}.a $libname.a'
++      soname_spec='${libname}${release}${shared_ext}$major'
++    fi
++    shlibpath_var=LIBPATH
++  fi
++  ;;
++
++amigaos*)
++  library_names_spec='$libname.ixlibrary $libname.a'
++  # Create ${libname}_ixlibrary.a entries in /sys/libs.
++  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
++  ;;
++
++beos*)
++  library_names_spec='${libname}${shared_ext}'
++  dynamic_linker="$host_os ld.so"
++  shlibpath_var=LIBRARY_PATH
++  ;;
++
++bsdi[45]*)
++  version_type=linux
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
++  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
++  # the default ld.so.conf also contains /usr/contrib/lib and
++  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
++  # libtool to hard-code these into programs
++  ;;
++
++cygwin* | mingw* | pw32*)
++  version_type=windows
++  shrext_cmds=".dll"
++  need_version=no
++  need_lib_prefix=no
++
++  case $GCC,$host_os in
++  yes,cygwin* | yes,mingw* | yes,pw32*)
++    library_names_spec='$libname.dll.a'
++    # DLL is installed to $(libdir)/../bin by postinstall_cmds
++    postinstall_cmds='base_file=`basename \${file}`~
++      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
++      dldir=$destdir/`dirname \$dlpath`~
++      test -d \$dldir || mkdir -p \$dldir~
++      $install_prog $dir/$dlname \$dldir/$dlname~
++      chmod a+x \$dldir/$dlname'
++    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
++      dlpath=$dir/\$dldll~
++       $rm \$dlpath'
++    shlibpath_overrides_runpath=yes
++
++    case $host_os in
++    cygwin*)
++      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
++      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
++      ;;
++    mingw*)
++      # MinGW DLLs use traditional 'lib' prefix
++      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
++        # It is most probably a Windows format PATH printed by
++        # mingw gcc, but we are running on Cygwin. Gcc prints its search
++        # path with ; separators, and with drive letters. We can handle the
++        # drive letters (cygwin fileutils understands them), so leave them,
++        # especially as we might pass files found there to a mingw objdump,
++        # which wouldn't understand a cygwinified path. Ahh.
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++      else
++        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++      fi
++      ;;
++    pw32*)
++      # pw32 DLLs use 'pw' prefix rather than 'lib'
++      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
++      ;;
++    esac
++    ;;
++
++  *)
++    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
++    ;;
++  esac
++  dynamic_linker='Win32 ld.exe'
++  # FIXME: first we should search . and the directory the executable is in
++  shlibpath_var=PATH
++  ;;
++
++darwin* | rhapsody*)
++  dynamic_linker="$host_os dyld"
++  version_type=darwin
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
++  soname_spec='${libname}${release}${major}$shared_ext'
++  shlibpath_overrides_runpath=yes
++  shlibpath_var=DYLD_LIBRARY_PATH
++  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
++  # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
++  if test "$GCC" = yes; then
++    sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
++  else
++    sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
++  fi
++  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
++  ;;
++
++dgux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++freebsd1*)
++  dynamic_linker=no
++  ;;
++
++kfreebsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++freebsd* | dragonfly*)
++  # DragonFly does not have aout.  When/if they implement a new
++  # versioning mechanism, adjust this.
++  if test -x /usr/bin/objformat; then
++    objformat=`/usr/bin/objformat`
++  else
++    case $host_os in
++    freebsd[123]*) objformat=aout ;;
++    *) objformat=elf ;;
++    esac
++  fi
++  version_type=freebsd-$objformat
++  case $version_type in
++    freebsd-elf*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++      need_version=no
++      need_lib_prefix=no
++      ;;
++    freebsd-*)
++      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
++      need_version=yes
++      ;;
++  esac
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_os in
++  freebsd2*)
++    shlibpath_overrides_runpath=yes
++    ;;
++  freebsd3.[01]* | freebsdelf3.[01]*)
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
++  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
++    shlibpath_overrides_runpath=no
++    hardcode_into_libs=yes
++    ;;
++  freebsd*) # from 4.6 on
++    shlibpath_overrides_runpath=yes
++    hardcode_into_libs=yes
++    ;;
++  esac
++  ;;
++
++gnu*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  ;;
++
++hpux9* | hpux10* | hpux11*)
++  # Give a soname corresponding to the major version so that dld.sl refuses to
++  # link against other versions.
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  case $host_cpu in
++  ia64*)
++    shrext_cmds='.so'
++    hardcode_into_libs=yes
++    dynamic_linker="$host_os dld.so"
++    shlibpath_var=LD_LIBRARY_PATH
++    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    if test "X$HPUX_IA64_MODE" = X32; then
++      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
++    else
++      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
++    fi
++    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++    ;;
++   hppa*64*)
++     shrext_cmds='.sl'
++     hardcode_into_libs=yes
++     dynamic_linker="$host_os dld.sl"
++     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
++     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
++     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++     soname_spec='${libname}${release}${shared_ext}$major'
++     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
++     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
++     ;;
++   *)
++    shrext_cmds='.sl'
++    dynamic_linker="$host_os dld.sl"
++    shlibpath_var=SHLIB_PATH
++    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    ;;
++  esac
++  # HP-UX runs *really* slowly unless shared libraries are mode 555.
++  postinstall_cmds='chmod 555 $lib'
++  ;;
++
++interix3*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  ;;
++
++irix5* | irix6* | nonstopux*)
++  case $host_os in
++    nonstopux*) version_type=nonstopux ;;
++    *)
++	if test "$lt_cv_prog_gnu_ld" = yes; then
++		version_type=linux
++	else
++		version_type=irix
++	fi ;;
++  esac
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
++  case $host_os in
++  irix5* | nonstopux*)
++    libsuff= shlibsuff=
++    ;;
++  *)
++    case $LD in # libtool.m4 will add one of these switches to LD
++    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
++      libsuff= shlibsuff= libmagic=32-bit;;
++    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
++      libsuff=32 shlibsuff=N32 libmagic=N32;;
++    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
++      libsuff=64 shlibsuff=64 libmagic=64-bit;;
++    *) libsuff= shlibsuff= libmagic=never-match;;
++    esac
++    ;;
++  esac
++  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
++  shlibpath_overrides_runpath=no
++  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
++  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
++  hardcode_into_libs=yes
++  ;;
++
++# No shared lib support for Linux oldld, aout, or coff.
++linux*oldld* | linux*aout* | linux*coff*)
++  dynamic_linker=no
++  ;;
++
++# This must be Linux ELF.
++linux*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  # This implies no fast_install, which is unacceptable.
++  # Some rework will be needed to allow for fast_install
++  # before this can be enabled.
++  hardcode_into_libs=yes
++
++  # Append ld.so.conf contents to the search path
++  if test -f /etc/ld.so.conf; then
++    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
++    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
++  fi
++
++  # We used to test for /lib/ld.so.1 and disable shared libraries on
++  # powerpc, because MkLinux only supported shared libraries with the
++  # GNU dynamic linker.  Since this was broken with cross compilers,
++  # most powerpc-linux boxes support dynamic linking these days and
++  # people can always --disable-shared, the test was removed, and we
++  # assume the GNU/Linux dynamic linker is in use.
++  dynamic_linker='GNU/Linux ld.so'
++  ;;
++
++netbsdelf*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='NetBSD ld.elf_so'
++  ;;
++
++knetbsd*-gnu)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=no
++  hardcode_into_libs=yes
++  dynamic_linker='GNU ld.so'
++  ;;
++
++netbsd*)
++  version_type=sunos
++  need_lib_prefix=no
++  need_version=no
++  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++    dynamic_linker='NetBSD (a.out) ld.so'
++  else
++    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
++    soname_spec='${libname}${release}${shared_ext}$major'
++    dynamic_linker='NetBSD ld.elf_so'
++  fi
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  ;;
++
++newsos6)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++nto-qnx*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  ;;
++
++openbsd*)
++  version_type=sunos
++  sys_lib_dlsearch_path_spec="/usr/lib"
++  need_lib_prefix=no
++  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
++  case $host_os in
++    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
++    *)                         need_version=no  ;;
++  esac
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++    case $host_os in
++      openbsd2.[89] | openbsd2.[89].*)
++	shlibpath_overrides_runpath=no
++	;;
++      *)
++	shlibpath_overrides_runpath=yes
++	;;
++      esac
++  else
++    shlibpath_overrides_runpath=yes
++  fi
++  ;;
++
++os2*)
++  libname_spec='$name'
++  shrext_cmds=".dll"
++  need_lib_prefix=no
++  library_names_spec='$libname${shared_ext} $libname.a'
++  dynamic_linker='OS/2 ld.exe'
++  shlibpath_var=LIBPATH
++  ;;
++
++osf3* | osf4* | osf5*)
++  version_type=osf
++  need_lib_prefix=no
++  need_version=no
++  soname_spec='${libname}${release}${shared_ext}$major'
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  shlibpath_var=LD_LIBRARY_PATH
++  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
++  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++  ;;
++
++solaris*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  hardcode_into_libs=yes
++  # ldd complains unless libraries are executable
++  postinstall_cmds='chmod +x $lib'
++  ;;
++
++sunos4*)
++  version_type=sunos
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
++  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
++  shlibpath_var=LD_LIBRARY_PATH
++  shlibpath_overrides_runpath=yes
++  if test "$with_gnu_ld" = yes; then
++    need_lib_prefix=no
++  fi
++  need_version=yes
++  ;;
++
++sysv4 | sysv4.3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  case $host_vendor in
++    sni)
++      shlibpath_overrides_runpath=no
++      need_lib_prefix=no
++      export_dynamic_flag_spec='${wl}-Blargedynsym'
++      runpath_var=LD_RUN_PATH
++      ;;
++    siemens)
++      need_lib_prefix=no
++      ;;
++    motorola)
++      need_lib_prefix=no
++      need_version=no
++      shlibpath_overrides_runpath=no
++      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
++      ;;
++  esac
++  ;;
++
++sysv4*MP*)
++  if test -d /usr/nec ;then
++    version_type=linux
++    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
++    soname_spec='$libname${shared_ext}.$major'
++    shlibpath_var=LD_LIBRARY_PATH
++  fi
++  ;;
++
++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
++  version_type=freebsd-elf
++  need_lib_prefix=no
++  need_version=no
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  hardcode_into_libs=yes
++  if test "$with_gnu_ld" = yes; then
++    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
++    shlibpath_overrides_runpath=no
++  else
++    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
++    shlibpath_overrides_runpath=yes
++    case $host_os in
++      sco3.2v5*)
++        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
++	;;
++    esac
++  fi
++  sys_lib_dlsearch_path_spec='/usr/lib'
++  ;;
++
++uts4*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
++  soname_spec='${libname}${release}${shared_ext}$major'
++  shlibpath_var=LD_LIBRARY_PATH
++  ;;
++
++*)
++  dynamic_linker=no
++  ;;
++esac
++echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6
++test "$dynamic_linker" = no && can_build_shared=no
++
++variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
++if test "$GCC" = yes; then
++  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++fi
++
++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
++hardcode_action_GCJ=
++if test -n "$hardcode_libdir_flag_spec_GCJ" || \
++   test -n "$runpath_var_GCJ" || \
++   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
++
++  # We can hardcode non-existant directories.
++  if test "$hardcode_direct_GCJ" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
++     test "$hardcode_minus_L_GCJ" != no; then
++    # Linking always hardcodes the temporary library directory.
++    hardcode_action_GCJ=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    hardcode_action_GCJ=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  hardcode_action_GCJ=unsupported
++fi
++echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
++echo "${ECHO_T}$hardcode_action_GCJ" >&6
++
++if test "$hardcode_action_GCJ" = relink; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++
++
++# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++  # See if we are running on zsh, and set the options which allow our commands through
++  # without removal of \ escapes.
++  if test -n "${ZSH_VERSION+set}" ; then
++    setopt NO_GLOB_SUBST
++  fi
++  # Now quote all the things that may contain metacharacters while being
++  # careful not to overquote the AC_SUBSTed values.  We take copies of the
++  # variables and quote the copies for generation of the libtool script.
++  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++    SED SHELL STRIP \
++    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++    deplibs_check_method reload_flag reload_cmds need_locks \
++    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++    lt_cv_sys_global_symbol_to_c_name_address \
++    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++    old_postinstall_cmds old_postuninstall_cmds \
++    compiler_GCJ \
++    CC_GCJ \
++    LD_GCJ \
++    lt_prog_compiler_wl_GCJ \
++    lt_prog_compiler_pic_GCJ \
++    lt_prog_compiler_static_GCJ \
++    lt_prog_compiler_no_builtin_flag_GCJ \
++    export_dynamic_flag_spec_GCJ \
++    thread_safe_flag_spec_GCJ \
++    whole_archive_flag_spec_GCJ \
++    enable_shared_with_static_runtimes_GCJ \
++    old_archive_cmds_GCJ \
++    old_archive_from_new_cmds_GCJ \
++    predep_objects_GCJ \
++    postdep_objects_GCJ \
++    predeps_GCJ \
++    postdeps_GCJ \
++    compiler_lib_search_path_GCJ \
++    archive_cmds_GCJ \
++    archive_expsym_cmds_GCJ \
++    postinstall_cmds_GCJ \
++    postuninstall_cmds_GCJ \
++    old_archive_from_expsyms_cmds_GCJ \
++    allow_undefined_flag_GCJ \
++    no_undefined_flag_GCJ \
++    export_symbols_cmds_GCJ \
++    hardcode_libdir_flag_spec_GCJ \
++    hardcode_libdir_flag_spec_ld_GCJ \
++    hardcode_libdir_separator_GCJ \
++    hardcode_automatic_GCJ \
++    module_cmds_GCJ \
++    module_expsym_cmds_GCJ \
++    lt_cv_prog_compiler_c_o_GCJ \
++    exclude_expsyms_GCJ \
++    include_expsyms_GCJ; do
++
++    case $var in
++    old_archive_cmds_GCJ | \
++    old_archive_from_new_cmds_GCJ | \
++    archive_cmds_GCJ | \
++    archive_expsym_cmds_GCJ | \
++    module_cmds_GCJ | \
++    module_expsym_cmds_GCJ | \
++    old_archive_from_expsyms_cmds_GCJ | \
++    export_symbols_cmds_GCJ | \
++    extract_expsyms_cmds | reload_cmds | finish_cmds | \
++    postinstall_cmds | postuninstall_cmds | \
++    old_postinstall_cmds | old_postuninstall_cmds | \
++    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++      # Double-quote double-evaled strings.
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++      ;;
++    *)
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++      ;;
++    esac
++  done
++
++  case $lt_echo in
++  *'\$0 --fallback-echo"')
++    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
++    ;;
++  esac
++
++cfgfile="$ofile"
++
++  cat <<__EOF__ >> "$cfgfile"
++# ### BEGIN LIBTOOL TAG CONFIG: $tagname
++
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$archive_cmds_need_lc_GCJ
++
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
++
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
++
++# A C compiler.
++LTCC=$lt_LTCC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
++# A language-specific compiler.
++CC=$lt_compiler_GCJ
++
++# Is the compiler the GNU C compiler?
++with_gcc=$GCC_GCJ
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# The linker used to build libraries.
++LD=$lt_LD_GCJ
++
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
++
++# A BSD-compatible nm program.
++NM=$lt_NM
++
++# A symbol stripping program
++STRIP=$lt_STRIP
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
++
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
++
++# Used on cygwin: assembler.
++AS="$AS"
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl_GCJ
++
++# Object file suffix (normally "o").
++objext="$ac_objext"
++
++# Old archive suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
++
++# Executable file suffix (normally "").
++exeext="$exeext"
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_lt_prog_compiler_pic_GCJ
++pic_mode=$pic_mode
++
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_lt_prog_compiler_static_GCJ
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
++
++# Library versioning type.
++version_type=$version_type
++
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
++
++# List of archive names.  First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
++
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
++
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_old_archive_cmds_GCJ
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
++
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_archive_cmds_GCJ
++archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
++
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_module_cmds_GCJ
++module_expsym_cmds=$lt_module_expsym_cmds_GCJ
++
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_predep_objects_GCJ
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_postdep_objects_GCJ
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_predeps_GCJ
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_postdeps_GCJ
++
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_allow_undefined_flag_GCJ
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_no_undefined_flag_GCJ
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
++
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$hardcode_action_GCJ
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
++
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
++
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$hardcode_direct_GCJ
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$hardcode_minus_L_GCJ
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
++
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$hardcode_automatic_GCJ
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$link_all_deplibs_GCJ
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path="$fix_srcfile_path_GCJ"
++
++# Set to yes if exported symbols are required.
++always_export_symbols=$always_export_symbols_GCJ
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_export_symbols_cmds_GCJ
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_exclude_expsyms_GCJ
++
++# Symbols that must always be exported.
++include_expsyms=$lt_include_expsyms_GCJ
++
++# ### END LIBTOOL TAG CONFIG: $tagname
++
++__EOF__
++
++
++else
++  # If there is no Makefile yet, we rely on a make rule to execute
++  # `config.status --recheck' to rerun these tests and create the
++  # libtool script then.
++  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++  if test -f "$ltmain_in"; then
++    test -f Makefile && make "$ltmain"
++  fi
++fi
++
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++CC="$lt_save_CC"
++
++	else
++	  tagname=""
++	fi
++	;;
++
++      RC)
++
++
++
++# Source file extension for RC test sources.
++ac_ext=rc
++
++# Object file extension for compiled RC test sources.
++objext=o
++objext_RC=$objext
++
++# Code to be used in simple compile tests
++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
++
++# Code to be used in simple link tests
++lt_simple_link_test_code="$lt_simple_compile_test_code"
++
++# ltmain only uses $CC for tagged configurations so make sure $CC is set.
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++
++
++# save warnings/boilerplate of simple test code
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++
++ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++
++
++# Allow CC to be a program name with arguments.
++lt_save_CC="$CC"
++CC=${RC-"windres"}
++compiler=$CC
++compiler_RC=$CC
++for cc_temp in $compiler""; do
++  case $cc_temp in
++    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
++    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++
++lt_cv_prog_compiler_c_o_RC=yes
++
++# The else clause should only fire when bootstrapping the
++# libtool distribution, otherwise you forgot to ship ltmain.sh
++# with your package, and you will get complaints that there are
++# no rules to generate ltmain.sh.
++if test -f "$ltmain"; then
++  # See if we are running on zsh, and set the options which allow our commands through
++  # without removal of \ escapes.
++  if test -n "${ZSH_VERSION+set}" ; then
++    setopt NO_GLOB_SUBST
++  fi
++  # Now quote all the things that may contain metacharacters while being
++  # careful not to overquote the AC_SUBSTed values.  We take copies of the
++  # variables and quote the copies for generation of the libtool script.
++  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
++    SED SHELL STRIP \
++    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
++    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
++    deplibs_check_method reload_flag reload_cmds need_locks \
++    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
++    lt_cv_sys_global_symbol_to_c_name_address \
++    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
++    old_postinstall_cmds old_postuninstall_cmds \
++    compiler_RC \
++    CC_RC \
++    LD_RC \
++    lt_prog_compiler_wl_RC \
++    lt_prog_compiler_pic_RC \
++    lt_prog_compiler_static_RC \
++    lt_prog_compiler_no_builtin_flag_RC \
++    export_dynamic_flag_spec_RC \
++    thread_safe_flag_spec_RC \
++    whole_archive_flag_spec_RC \
++    enable_shared_with_static_runtimes_RC \
++    old_archive_cmds_RC \
++    old_archive_from_new_cmds_RC \
++    predep_objects_RC \
++    postdep_objects_RC \
++    predeps_RC \
++    postdeps_RC \
++    compiler_lib_search_path_RC \
++    archive_cmds_RC \
++    archive_expsym_cmds_RC \
++    postinstall_cmds_RC \
++    postuninstall_cmds_RC \
++    old_archive_from_expsyms_cmds_RC \
++    allow_undefined_flag_RC \
++    no_undefined_flag_RC \
++    export_symbols_cmds_RC \
++    hardcode_libdir_flag_spec_RC \
++    hardcode_libdir_flag_spec_ld_RC \
++    hardcode_libdir_separator_RC \
++    hardcode_automatic_RC \
++    module_cmds_RC \
++    module_expsym_cmds_RC \
++    lt_cv_prog_compiler_c_o_RC \
++    exclude_expsyms_RC \
++    include_expsyms_RC; do
++
++    case $var in
++    old_archive_cmds_RC | \
++    old_archive_from_new_cmds_RC | \
++    archive_cmds_RC | \
++    archive_expsym_cmds_RC | \
++    module_cmds_RC | \
++    module_expsym_cmds_RC | \
++    old_archive_from_expsyms_cmds_RC | \
++    export_symbols_cmds_RC | \
++    extract_expsyms_cmds | reload_cmds | finish_cmds | \
++    postinstall_cmds | postuninstall_cmds | \
++    old_postinstall_cmds | old_postuninstall_cmds | \
++    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
++      # Double-quote double-evaled strings.
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
++      ;;
++    *)
++      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
++      ;;
++    esac
++  done
++
++  case $lt_echo in
++  *'\$0 --fallback-echo"')
++    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
++    ;;
++  esac
++
++cfgfile="$ofile"
++
++  cat <<__EOF__ >> "$cfgfile"
++# ### BEGIN LIBTOOL TAG CONFIG: $tagname
++
++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
++
++# Shell to use when invoking shell scripts.
++SHELL=$lt_SHELL
++
++# Whether or not to build shared libraries.
++build_libtool_libs=$enable_shared
++
++# Whether or not to build static libraries.
++build_old_libs=$enable_static
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$archive_cmds_need_lc_RC
++
++# Whether or not to disallow shared libs when runtime libs are static
++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
++
++# Whether or not to optimize for fast installation.
++fast_install=$enable_fast_install
++
++# The host system.
++host_alias=$host_alias
++host=$host
++host_os=$host_os
++
++# The build system.
++build_alias=$build_alias
++build=$build
++build_os=$build_os
++
++# An echo program that does not interpret backslashes.
++echo=$lt_echo
++
++# The archiver.
++AR=$lt_AR
++AR_FLAGS=$lt_AR_FLAGS
++
++# A C compiler.
++LTCC=$lt_LTCC
++
++# LTCC compiler flags.
++LTCFLAGS=$lt_LTCFLAGS
++
++# A language-specific compiler.
++CC=$lt_compiler_RC
++
++# Is the compiler the GNU C compiler?
++with_gcc=$GCC_RC
++
++# An ERE matcher.
++EGREP=$lt_EGREP
++
++# The linker used to build libraries.
++LD=$lt_LD_RC
++
++# Whether we need hard or soft links.
++LN_S=$lt_LN_S
++
++# A BSD-compatible nm program.
++NM=$lt_NM
++
++# A symbol stripping program
++STRIP=$lt_STRIP
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=$MAGIC_CMD
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="$DLLTOOL"
++
++# Used on cygwin: object dumper.
++OBJDUMP="$OBJDUMP"
++
++# Used on cygwin: assembler.
++AS="$AS"
++
++# The name of the directory that contains temporary libtool files.
++objdir=$objdir
++
++# How to create reloadable object files.
++reload_flag=$lt_reload_flag
++reload_cmds=$lt_reload_cmds
++
++# How to pass a linker flag through the compiler.
++wl=$lt_lt_prog_compiler_wl_RC
++
++# Object file suffix (normally "o").
++objext="$ac_objext"
++
++# Old archive suffix (normally "a").
++libext="$libext"
++
++# Shared library suffix (normally ".so").
++shrext_cmds='$shrext_cmds'
++
++# Executable file suffix (normally "").
++exeext="$exeext"
++
++# Additional compiler flags for building library objects.
++pic_flag=$lt_lt_prog_compiler_pic_RC
++pic_mode=$pic_mode
++
++# What is the maximum length of a command?
++max_cmd_len=$lt_cv_sys_max_cmd_len
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
++
++# Must we lock files when doing compilation?
++need_locks=$lt_need_locks
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=$need_lib_prefix
++
++# Do we need a version for libraries?
++need_version=$need_version
++
++# Whether dlopen is supported.
++dlopen_support=$enable_dlopen
++
++# Whether dlopen of programs is supported.
++dlopen_self=$enable_dlopen_self
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=$enable_dlopen_self_static
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag=$lt_lt_prog_compiler_static_RC
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
+ 
+-*-*-sco3.2v5*)
+-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+-  SAVE_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS -belf"
+-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+-if test "${lt_cv_cc_needs_belf+set}" = set; then
+-  echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+-  cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
++# Library versioning type.
++version_type=$version_type
+ 
+-int
+-main ()
+-{
++# Format of library name prefix.
++libname_spec=$lt_libname_spec
+ 
+-  ;
+-  return 0;
+-}
+-_ACEOF
+-rm -f conftest.$ac_objext conftest$ac_exeext
+-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+-  (eval $ac_link) 2>conftest.er1
+-  ac_status=$?
+-  grep -v '^ *+' conftest.er1 >conftest.err
+-  rm -f conftest.er1
+-  cat conftest.err >&5
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; } &&
+-	 { ac_try='test -s conftest$ac_exeext'
+-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+-  (eval $ac_try) 2>&5
+-  ac_status=$?
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); }; }; then
+-  lt_cv_cc_needs_belf=yes
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
++# List of archive names.  First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec=$lt_library_names_spec
+ 
+-lt_cv_cc_needs_belf=no
+-fi
+-rm -f conftest.err conftest.$ac_objext \
+-      conftest$ac_exeext conftest.$ac_ext
+-fi
+-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+-    CFLAGS="$SAVE_CFLAGS"
+-  fi
+-  ;;
++# The coded name of the library, if different from the real name.
++soname_spec=$lt_soname_spec
+ 
++# Commands used to build and install an old-style archive.
++RANLIB=$lt_RANLIB
++old_archive_cmds=$lt_old_archive_cmds_RC
++old_postinstall_cmds=$lt_old_postinstall_cmds
++old_postuninstall_cmds=$lt_old_postuninstall_cmds
+ 
+-esac
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+ 
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+ 
+-# Save cache, so that ltconfig can load it
+-cat >confcache <<\_ACEOF
+-# This file is a shell script that caches the results of configure
+-# tests run on this system so they can be shared between configure
+-# scripts and configure runs, see configure's option --config-cache.
+-# It is not useful on other systems.  If it contains results you don't
+-# want to keep, you may remove or edit it.
+-#
+-# config.status only pays attention to the cache file if you give it
+-# the --recheck option to rerun configure.
+-#
+-# `ac_cv_env_foo' variables (set or unset) will be overridden when
+-# loading this file, other *unset* `ac_cv_foo' will be assigned the
+-# following values.
++# Commands used to build and install a shared archive.
++archive_cmds=$lt_archive_cmds_RC
++archive_expsym_cmds=$lt_archive_expsym_cmds_RC
++postinstall_cmds=$lt_postinstall_cmds
++postuninstall_cmds=$lt_postuninstall_cmds
+ 
+-_ACEOF
++# Commands used to build a loadable module (assumed same as above if empty)
++module_cmds=$lt_module_cmds_RC
++module_expsym_cmds=$lt_module_expsym_cmds_RC
+ 
+-# The following way of writing the cache mishandles newlines in values,
+-# but we know of no workaround that is simple, portable, and efficient.
+-# So, don't put newlines in cache variables' values.
+-# Ultrix sh set writes to stderr and can't be redirected directly,
+-# and sets the high bit in the cache file unless we assign to the vars.
+-{
+-  (set) 2>&1 |
+-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
+-    *ac_space=\ *)
+-      # `set' does not quote correctly, so add quotes (double-quote
+-      # substitution turns \\\\ into \\, and sed turns \\ into \).
+-      sed -n \
+-	"s/'/'\\\\''/g;
+-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+-      ;;
+-    *)
+-      # `set' quotes correctly as required by POSIX, so do not add quotes.
+-      sed -n \
+-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+-      ;;
+-    esac;
+-} |
+-  sed '
+-     t clear
+-     : clear
+-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+-     t end
+-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+-     : end' >>confcache
+-if diff $cache_file confcache >/dev/null 2>&1; then :; else
+-  if test -w $cache_file; then
+-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+-    cat confcache >$cache_file
+-  else
+-    echo "not updating unwritable cache $cache_file"
++# Commands to strip libraries.
++old_striplib=$lt_old_striplib
++striplib=$lt_striplib
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predep_objects=$lt_predep_objects_RC
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdep_objects=$lt_postdep_objects_RC
++
++# Dependencies to place before the objects being linked to create a
++# shared library.
++predeps=$lt_predeps_RC
++
++# Dependencies to place after the objects being linked to create a
++# shared library.
++postdeps=$lt_postdeps_RC
++
++# The library search path used internally by the compiler when linking
++# a shared library.
++compiler_lib_search_path=$lt_compiler_lib_search_path_RC
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method=$lt_deplibs_check_method
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd=$lt_file_magic_cmd
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=$lt_allow_undefined_flag_RC
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=$lt_no_undefined_flag_RC
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds=$lt_finish_cmds
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=$lt_finish_eval
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
++
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
++
++# This is the shared library runtime path variable.
++runpath_var=$runpath_var
++
++# This is the shared library path variable.
++shlibpath_var=$shlibpath_var
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=$shlibpath_overrides_runpath
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=$hardcode_action_RC
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=$hardcode_into_libs
++
++# Flag to hardcode \$libdir into a binary during linking.
++# This must work even if \$libdir does not exist.
++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
++
++# If ld is used when linking, flag to hardcode \$libdir into
++# a binary during linking. This must work even if \$libdir does
++# not exist.
++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
++
++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=$hardcode_direct_RC
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=$hardcode_minus_L_RC
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
++
++# Set to yes if building a shared library automatically hardcodes DIR into the library
++# and all subsequent libraries and executables linked against it.
++hardcode_automatic=$hardcode_automatic_RC
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="$variables_saved_for_relink"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=$link_all_deplibs_RC
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
++
++# Fix the shell variable \$srcfile for the compiler.
++fix_srcfile_path="$fix_srcfile_path_RC"
++
++# Set to yes if exported symbols are required.
++always_export_symbols=$always_export_symbols_RC
++
++# The commands to list exported symbols.
++export_symbols_cmds=$lt_export_symbols_cmds_RC
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=$lt_extract_expsyms_cmds
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms=$lt_exclude_expsyms_RC
++
++# Symbols that must always be exported.
++include_expsyms=$lt_include_expsyms_RC
++
++# ### END LIBTOOL TAG CONFIG: $tagname
++
++__EOF__
++
++
++else
++  # If there is no Makefile yet, we rely on a make rule to execute
++  # `config.status --recheck' to rerun these tests and create the
++  # libtool script then.
++  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
++  if test -f "$ltmain_in"; then
++    test -f Makefile && make "$ltmain"
+   fi
+ fi
+-rm -f confcache
+ 
+-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
+-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
+-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
+-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $lt_target \
+-|| { { echo "$as_me:$LINENO: error: libtool configure failed" >&5
+-echo "$as_me: error: libtool configure failed" >&2;}
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++CC="$lt_save_CC"
++
++	;;
++
++      *)
++	{ { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
++echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
+    { (exit 1); exit 1; }; }
++	;;
++      esac
+ 
+-# Reload cache, that may have been modified by ltconfig
+-if test -r "$cache_file"; then
+-  # Some versions of bash will fail to source /dev/null (special
+-  # files actually), so we avoid doing that.
+-  if test -f "$cache_file"; then
+-    { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+-echo "$as_me: loading cache $cache_file" >&6;}
+-    case $cache_file in
+-      [\\/]* | ?:[\\/]* ) . $cache_file;;
+-      *)                      . ./$cache_file;;
+-    esac
++      # Append the new tag name to the list of available tags.
++      if test -n "$tagname" ; then
++      available_tags="$available_tags $tagname"
++    fi
++    fi
++  done
++  IFS="$lt_save_ifs"
++
++  # Now substitute the updated list of available tags.
++  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
++    mv "${ofile}T" "$ofile"
++    chmod +x "$ofile"
++  else
++    rm -f "${ofile}T"
++    { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
++echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
++   { (exit 1); exit 1; }; }
+   fi
+-else
+-  { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+-echo "$as_me: creating cache $cache_file" >&6;}
+-  >$cache_file
+ fi
+ 
+ 
++
+ # This can be used to rebuild libtool when needed
+-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+ 
+ # Always use our own libtool.
+ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+ 
+-# Redirect the config.log output again, so that the ltconfig log is not
+-# clobbered by the next message.
+-exec 5>>./config.log
++# Prevent multiple expansion
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
++
+ 
+ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+ echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+@@ -3530,8 +19291,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -3589,8 +19349,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -3706,8 +19465,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -3761,8 +19519,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -3807,8 +19564,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -3852,8 +19608,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -3892,6 +19647,115 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ 
++depcc="$CC"   am_compiler_list=
++
++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++  # We make a subdir and do the tests there.  Otherwise we can end up
++  # making bogus files that we don't know about and never remove.  For
++  # instance it was reported that on HP-UX the gcc test will end up
++  # making a dummy file named `D' -- because `-MD' means `put the output
++  # in D'.
++  mkdir conftest.dir
++  # Copy depcomp to subdir because otherwise we won't find it if we're
++  # using a relative directory.
++  cp "$am_depcomp" conftest.dir
++  cd conftest.dir
++  # We will build objects and dependencies in a subdirectory because
++  # it helps to detect inapplicable dependency modes.  For instance
++  # both Tru64's cc and ICC support -MD to output dependencies as a
++  # side effect of compilation, but ICC will put the dependencies in
++  # the current directory while Tru64 will put them in the object
++  # directory.
++  mkdir sub
++
++  am_cv_CC_dependencies_compiler_type=none
++  if test "$am_compiler_list" = ""; then
++     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++  fi
++  for depmode in $am_compiler_list; do
++    # Setup a source with many dependencies, because some compilers
++    # like to wrap large dependency lists on column 80 (with \), and
++    # we should not choose a depcomp mode which is confused by this.
++    #
++    # We need to recreate these files for each test, as the compiler may
++    # overwrite some of them when testing with obscure command lines.
++    # This happens at least with the AIX C compiler.
++    : > sub/conftest.c
++    for i in 1 2 3 4 5 6; do
++      echo '#include "conftst'$i'.h"' >> sub/conftest.c
++      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++      # Solaris 8's {/usr,}/bin/sh.
++      touch sub/conftst$i.h
++    done
++    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++    case $depmode in
++    nosideeffect)
++      # after this tag, mechanisms are not by side-effect, so they'll
++      # only be used when explicitly requested
++      if test "x$enable_dependency_tracking" = xyes; then
++	continue
++      else
++	break
++      fi
++      ;;
++    none) break ;;
++    esac
++    # We check with `-c' and `-o' for the sake of the "dashmstdout"
++    # mode.  It turns out that the SunPro C++ compiler does not properly
++    # handle `-M -o', and we need to detect this.
++    if depmode=$depmode \
++       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++         >/dev/null 2>conftest.err &&
++       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++      # icc doesn't choke on unknown options, it will just issue warnings
++      # or remarks (even with -Werror).  So we grep stderr for any message
++      # that says an option was ignored or not supported.
++      # When given -MP, icc 7.0 and 7.1 complain thusly:
++      #   icc: Command line warning: ignoring option '-M'; no argument required
++      # The diagnosis changed in icc 8.0:
++      #   icc: Command line remark: option '-MP' not supported
++      if (grep 'ignoring option' conftest.err ||
++          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++        am_cv_CC_dependencies_compiler_type=$depmode
++        break
++      fi
++    fi
++  done
++
++  cd ..
++  rm -rf conftest.dir
++else
++  am_cv_CC_dependencies_compiler_type=none
++fi
++
++fi
++echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
++
++
++
++if
++  test "x$enable_dependency_tracking" != xno \
++  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
++  am__fastdepCC_TRUE=
++  am__fastdepCC_FALSE='#'
++else
++  am__fastdepCC_TRUE='#'
++  am__fastdepCC_FALSE=
++fi
++
++
+ ac_ext=cc
+ ac_cpp='$CXXCPP $CPPFLAGS'
+ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+@@ -4037,8 +19901,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_cxx_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -4096,8 +19959,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_cxx_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -4168,8 +20030,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_cxx_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -4213,8 +20074,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_cxx_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_cxx_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -4247,6 +20107,115 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS con
+ ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+ 
++depcc="$CXX"  am_compiler_list=
++
++echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
++if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
++  echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
++  # We make a subdir and do the tests there.  Otherwise we can end up
++  # making bogus files that we don't know about and never remove.  For
++  # instance it was reported that on HP-UX the gcc test will end up
++  # making a dummy file named `D' -- because `-MD' means `put the output
++  # in D'.
++  mkdir conftest.dir
++  # Copy depcomp to subdir because otherwise we won't find it if we're
++  # using a relative directory.
++  cp "$am_depcomp" conftest.dir
++  cd conftest.dir
++  # We will build objects and dependencies in a subdirectory because
++  # it helps to detect inapplicable dependency modes.  For instance
++  # both Tru64's cc and ICC support -MD to output dependencies as a
++  # side effect of compilation, but ICC will put the dependencies in
++  # the current directory while Tru64 will put them in the object
++  # directory.
++  mkdir sub
++
++  am_cv_CXX_dependencies_compiler_type=none
++  if test "$am_compiler_list" = ""; then
++     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
++  fi
++  for depmode in $am_compiler_list; do
++    # Setup a source with many dependencies, because some compilers
++    # like to wrap large dependency lists on column 80 (with \), and
++    # we should not choose a depcomp mode which is confused by this.
++    #
++    # We need to recreate these files for each test, as the compiler may
++    # overwrite some of them when testing with obscure command lines.
++    # This happens at least with the AIX C compiler.
++    : > sub/conftest.c
++    for i in 1 2 3 4 5 6; do
++      echo '#include "conftst'$i'.h"' >> sub/conftest.c
++      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
++      # Solaris 8's {/usr,}/bin/sh.
++      touch sub/conftst$i.h
++    done
++    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
++
++    case $depmode in
++    nosideeffect)
++      # after this tag, mechanisms are not by side-effect, so they'll
++      # only be used when explicitly requested
++      if test "x$enable_dependency_tracking" = xyes; then
++	continue
++      else
++	break
++      fi
++      ;;
++    none) break ;;
++    esac
++    # We check with `-c' and `-o' for the sake of the "dashmstdout"
++    # mode.  It turns out that the SunPro C++ compiler does not properly
++    # handle `-M -o', and we need to detect this.
++    if depmode=$depmode \
++       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
++       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
++       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
++         >/dev/null 2>conftest.err &&
++       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
++       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
++       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
++      # icc doesn't choke on unknown options, it will just issue warnings
++      # or remarks (even with -Werror).  So we grep stderr for any message
++      # that says an option was ignored or not supported.
++      # When given -MP, icc 7.0 and 7.1 complain thusly:
++      #   icc: Command line warning: ignoring option '-M'; no argument required
++      # The diagnosis changed in icc 8.0:
++      #   icc: Command line remark: option '-MP' not supported
++      if (grep 'ignoring option' conftest.err ||
++          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
++        am_cv_CXX_dependencies_compiler_type=$depmode
++        break
++      fi
++    fi
++  done
++
++  cd ..
++  rm -rf conftest.dir
++else
++  am_cv_CXX_dependencies_compiler_type=none
++fi
++
++fi
++echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
++CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
++
++
++
++if
++  test "x$enable_dependency_tracking" != xno \
++  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
++  am__fastdepCXX_TRUE=
++  am__fastdepCXX_FALSE='#'
++else
++  am__fastdepCXX_TRUE='#'
++  am__fastdepCXX_FALSE=
++fi
++
++
+ # Find a good install program.  We prefer a C program (faster),
+ # so one script is as good as another.  But avoid the broken or
+ # incompatible versions:
+@@ -4402,8 +20371,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_c
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -4471,83 +20439,111 @@ case "$target" in
+         ;;
+     *)
+         MATHLIB="-lm"
+-        ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+-# On Suns, sometimes $CPP names a directory.
+-if test -n "$CPP" && test -d "$CPP"; then
+-  CPP=
+-fi
+-if test -z "$CPP"; then
+-  if test "${ac_cv_prog_CPP+set}" = set; then
++        echo "$as_me:$LINENO: checking for X" >&5
++echo $ECHO_N "checking for X... $ECHO_C" >&6
++
++ac_path_x_has_been_run=yes
++
++# Check whether --with-x or --without-x was given.
++if test "${with_x+set}" = set; then
++  withval="$with_x"
++
++fi;
++# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
++if test "x$with_x" = xno; then
++  # The user explicitly disabled X.
++  have_x=disabled
++else
++  if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
++    # Both variables are already set.
++    have_x=yes
++  else
++    if test "${ac_cv_have_x+set}" = set; then
+   echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-      # Double quotes because CPP needs to be expanded
+-    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+-    do
+-      ac_preproc_ok=false
+-for ac_c_preproc_warn_flag in '' yes
+-do
+-  # Use a header file that comes with gcc, so configuring glibc
+-  # with a fresh cross-compiler works.
+-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+-  # <limits.h> exists even on freestanding compilers.
+-  # On the NeXT, cc -E runs the code through the compiler's parser,
+-  # not just through cpp. "Syntax error" is here to catch this case.
+-  cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-#ifdef __STDC__
+-# include <limits.h>
+-#else
+-# include <assert.h>
+-#endif
+-		     Syntax error
++  # One or both of the vars are not set, and there is no cached value.
++ac_x_includes=no ac_x_libraries=no
++rm -fr conftest.dir
++if mkdir conftest.dir; then
++  cd conftest.dir
++  # Make sure to not put "make" in the Imakefile rules, since we grep it out.
++  cat >Imakefile <<'_ACEOF'
++acfindx:
++	@echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+ _ACEOF
+-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+-  ac_status=$?
+-  grep -v '^ *+' conftest.er1 >conftest.err
+-  rm -f conftest.er1
+-  cat conftest.err >&5
+-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } >/dev/null; then
+-  if test -s conftest.err; then
+-    ac_cpp_err=$ac_c_preproc_warn_flag
+-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+-  else
+-    ac_cpp_err=
++  if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
++    # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
++    eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
++    # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
++    for ac_extension in a so sl; do
++      if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
++	 test -f $ac_im_libdir/libX11.$ac_extension; then
++	ac_im_usrlibdir=$ac_im_libdir; break
++      fi
++    done
++    # Screen out bogus values from the imake configuration.  They are
++    # bogus both because they are the default anyway, and because
++    # using them would break gcc on systems where it needs fixed includes.
++    case $ac_im_incroot in
++	/usr/include) ;;
++	*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
++    esac
++    case $ac_im_usrlibdir in
++	/usr/lib | /lib) ;;
++	*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
++    esac
+   fi
+-else
+-  ac_cpp_err=yes
++  cd ..
++  rm -fr conftest.dir
+ fi
+-if test -z "$ac_cpp_err"; then
+-  :
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+ 
+-  # Broken: fails on valid input.
+-continue
+-fi
+-rm -f conftest.err conftest.$ac_ext
++# Standard set of common directories for X headers.
++# Check X11 before X11Rn because it is often a symlink to the current release.
++ac_x_header_dirs='
++/usr/X11/include
++/usr/X11R6/include
++/usr/X11R5/include
++/usr/X11R4/include
+ 
+-  # OK, works on sane cases.  Now check whether non-existent headers
+-  # can be detected and how.
++/usr/include/X11
++/usr/include/X11R6
++/usr/include/X11R5
++/usr/include/X11R4
++
++/usr/local/X11/include
++/usr/local/X11R6/include
++/usr/local/X11R5/include
++/usr/local/X11R4/include
++
++/usr/local/include/X11
++/usr/local/include/X11R6
++/usr/local/include/X11R5
++/usr/local/include/X11R4
++
++/usr/X386/include
++/usr/x386/include
++/usr/XFree86/include/X11
++
++/usr/include
++/usr/local/include
++/usr/unsupported/include
++/usr/athena/include
++/usr/local/x11r5/include
++/usr/lpp/Xamples/include
++
++/usr/openwin/include
++/usr/openwin/share/include'
++
++if test "$ac_x_includes" = no; then
++  # Guess where to find include files, by looking for a specified header file.
++  # First, try using that file with no special directory specified.
+   cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h.  */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h.  */
+-#include <ac_nonexistent.h>
++#include <X11/Xlib.h>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+@@ -4567,148 +20563,126 @@ else
+   ac_cpp_err=yes
+ fi
+ if test -z "$ac_cpp_err"; then
+-  # Broken: success on invalid input.
+-continue
++  # We can compile using X headers with no special include directory.
++ac_x_includes=
+ else
+   echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+ 
+-  # Passes both tests.
+-ac_preproc_ok=:
+-break
+-fi
+-rm -f conftest.err conftest.$ac_ext
+-
++  for ac_dir in $ac_x_header_dirs; do
++  if test -r "$ac_dir/X11/Xlib.h"; then
++    ac_x_includes=$ac_dir
++    break
++  fi
+ done
+-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+-rm -f conftest.err conftest.$ac_ext
+-if $ac_preproc_ok; then
+-  break
+ fi
++rm -f conftest.err conftest.$ac_ext
++fi # $ac_x_includes = no
+ 
+-    done
+-    ac_cv_prog_CPP=$CPP
+-
+-fi
+-  CPP=$ac_cv_prog_CPP
+-else
+-  ac_cv_prog_CPP=$CPP
+-fi
+-echo "$as_me:$LINENO: result: $CPP" >&5
+-echo "${ECHO_T}$CPP" >&6
+-ac_preproc_ok=false
+-for ac_c_preproc_warn_flag in '' yes
+-do
+-  # Use a header file that comes with gcc, so configuring glibc
+-  # with a fresh cross-compiler works.
+-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+-  # <limits.h> exists even on freestanding compilers.
+-  # On the NeXT, cc -E runs the code through the compiler's parser,
+-  # not just through cpp. "Syntax error" is here to catch this case.
++if test "$ac_x_libraries" = no; then
++  # Check for the libraries.
++  # See if we find them without any special options.
++  # Don't add to $LIBS permanently.
++  ac_save_LIBS=$LIBS
++  LIBS="-lX11 $LIBS"
+   cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h.  */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h.  */
+-#ifdef __STDC__
+-# include <limits.h>
+-#else
+-# include <assert.h>
+-#endif
+-		     Syntax error
++#include <X11/Xlib.h>
++int
++main ()
++{
++XrmInitialize ()
++  ;
++  return 0;
++}
+ _ACEOF
+-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++  (eval $ac_link) 2>conftest.er1
+   ac_status=$?
+   grep -v '^ *+' conftest.er1 >conftest.err
+   rm -f conftest.er1
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } >/dev/null; then
+-  if test -s conftest.err; then
+-    ac_cpp_err=$ac_c_preproc_warn_flag
+-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+-  else
+-    ac_cpp_err=
+-  fi
+-else
+-  ac_cpp_err=yes
+-fi
+-if test -z "$ac_cpp_err"; then
+-  :
+-else
+-  echo "$as_me: failed program was:" >&5
+-sed 's/^/| /' conftest.$ac_ext >&5
+-
+-  # Broken: fails on valid input.
+-continue
+-fi
+-rm -f conftest.err conftest.$ac_ext
+-
+-  # OK, works on sane cases.  Now check whether non-existent headers
+-  # can be detected and how.
+-  cat >conftest.$ac_ext <<_ACEOF
+-/* confdefs.h.  */
+-_ACEOF
+-cat confdefs.h >>conftest.$ac_ext
+-cat >>conftest.$ac_ext <<_ACEOF
+-/* end confdefs.h.  */
+-#include <ac_nonexistent.h>
+-_ACEOF
+-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++  (exit $ac_status); } &&
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
++  ac_status=$?
++  echo "$as_me:$LINENO: \$? = $ac_status" >&5
++  (exit $ac_status); }; } &&
++	 { ac_try='test -s conftest$ac_exeext'
++  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++  (eval $ac_try) 2>&5
+   ac_status=$?
+-  grep -v '^ *+' conftest.er1 >conftest.err
+-  rm -f conftest.er1
+-  cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+-  (exit $ac_status); } >/dev/null; then
+-  if test -s conftest.err; then
+-    ac_cpp_err=$ac_c_preproc_warn_flag
+-    ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+-  else
+-    ac_cpp_err=
+-  fi
+-else
+-  ac_cpp_err=yes
+-fi
+-if test -z "$ac_cpp_err"; then
+-  # Broken: success on invalid input.
+-continue
++  (exit $ac_status); }; }; then
++  LIBS=$ac_save_LIBS
++# We can link X programs with no special library path.
++ac_x_libraries=
+ else
+   echo "$as_me: failed program was:" >&5
+ sed 's/^/| /' conftest.$ac_ext >&5
+ 
+-  # Passes both tests.
+-ac_preproc_ok=:
+-break
++LIBS=$ac_save_LIBS
++for ac_dir in `echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
++do
++  # Don't even attempt the hair of trying to link an X program!
++  for ac_extension in a so sl; do
++    if test -r $ac_dir/libX11.$ac_extension; then
++      ac_x_libraries=$ac_dir
++      break 2
++    fi
++  done
++done
+ fi
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++      conftest$ac_exeext conftest.$ac_ext
++fi # $ac_x_libraries = no
+ 
+-done
+-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+-rm -f conftest.err conftest.$ac_ext
+-if $ac_preproc_ok; then
+-  :
++if test "$ac_x_includes" = no || test "$ac_x_libraries" = no; then
++  # Didn't find X anywhere.  Cache the known absence of X.
++  ac_cv_have_x="have_x=no"
+ else
+-  { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+-See \`config.log' for more details." >&5
+-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+-See \`config.log' for more details." >&2;}
+-   { (exit 1); exit 1; }; }
++  # Record where we found X for the cache.
++  ac_cv_have_x="have_x=yes \
++		ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
++fi
+ fi
+ 
+-ac_ext=c
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+-ac_compiler_gnu=$ac_cv_c_compiler_gnu
++  fi
++  eval "$ac_cv_have_x"
++fi # $with_x != no
++
++if test "$have_x" != yes; then
++  echo "$as_me:$LINENO: result: $have_x" >&5
++echo "${ECHO_T}$have_x" >&6
++  no_x=yes
++else
++  # If each of the values was on the command line, it overrides each guess.
++  test "x$x_includes" = xNONE && x_includes=$ac_x_includes
++  test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
++  # Update the cache value to reflect the command line values.
++  ac_cv_have_x="have_x=yes \
++		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
++  # It might be that x_includes is empty (headers are found in the
++  # standard search path. Then output the corresponding message
++  ac_out_x_includes=$x_includes
++  test "x$x_includes" = x && ac_out_x_includes="in standard search path"
++  echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5
++echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6
++fi
+ 
+ 
+-echo "$as_me:$LINENO: checking for X" >&5
++if test "x$ac_path_x_has_been_run" != xyes; then
++  echo "$as_me:$LINENO: checking for X" >&5
+ echo $ECHO_N "checking for X... $ECHO_C" >&6
+ 
++ac_path_x_has_been_run=yes
+ 
+ # Check whether --with-x or --without-x was given.
+ if test "${with_x+set}" = set; then
+@@ -4801,7 +20775,7 @@ ac_x_header_dirs='
+ /usr/openwin/share/include'
+ 
+ if test "$ac_x_includes" = no; then
+-  # Guess where to find include files, by looking for Intrinsic.h.
++  # Guess where to find include files, by looking for a specified header file.
+   # First, try using that file with no special directory specified.
+   cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h.  */
+@@ -4809,7 +20783,7 @@ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h.  */
+-#include <X11/Intrinsic.h>
++#include <X11/Xlib.h>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+   (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+@@ -4836,7 +20810,7 @@ else
+ sed 's/^/| /' conftest.$ac_ext >&5
+ 
+   for ac_dir in $ac_x_header_dirs; do
+-  if test -r "$ac_dir/X11/Intrinsic.h"; then
++  if test -r "$ac_dir/X11/Xlib.h"; then
+     ac_x_includes=$ac_dir
+     break
+   fi
+@@ -4850,18 +20824,18 @@ if test "$ac_x_libraries" = no; then
+   # See if we find them without any special options.
+   # Don't add to $LIBS permanently.
+   ac_save_LIBS=$LIBS
+-  LIBS="-lXt $LIBS"
++  LIBS="-lX11 $LIBS"
+   cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h.  */
+ _ACEOF
+ cat confdefs.h >>conftest.$ac_ext
+ cat >>conftest.$ac_ext <<_ACEOF
+ /* end confdefs.h.  */
+-#include <X11/Intrinsic.h>
++#include <X11/Xlib.h>
+ int
+ main ()
+ {
+-XtMalloc (0)
++XrmInitialize ()
+   ;
+   return 0;
+ }
+@@ -4875,8 +20849,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -4900,7 +20873,7 @@ for ac_dir in `echo "$ac_x_includes $ac_
+ do
+   # Don't even attempt the hair of trying to link an X program!
+   for ac_extension in a so sl; do
+-    if test -r $ac_dir/libXt.$ac_extension; then
++    if test -r $ac_dir/libX11.$ac_extension; then
+       ac_x_libraries=$ac_dir
+       break 2
+     fi
+@@ -4936,11 +20909,16 @@ else
+   # Update the cache value to reflect the command line values.
+   ac_cv_have_x="have_x=yes \
+ 		ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+-  echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
+-echo "${ECHO_T}libraries $x_libraries, headers $x_includes" >&6
++  # It might be that x_includes is empty (headers are found in the
++  # standard search path. Then output the corresponding message
++  ac_out_x_includes=$x_includes
++  test "x$x_includes" = x && ac_out_x_includes="in standard search path"
++  echo "$as_me:$LINENO: result: libraries $x_libraries, headers $ac_out_x_includes" >&5
++echo "${ECHO_T}libraries $x_libraries, headers $ac_out_x_includes" >&6
+ fi
+ 
+-        if test "$no_x" = yes; then
++fi
++if test "$no_x" = yes; then
+   # Not all programs may use this symbol, but it does not hurt to define it.
+ 
+ cat >>confdefs.h <<\_ACEOF
+@@ -4987,8 +20965,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5039,8 +21016,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5116,8 +21092,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5172,8 +21147,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5241,8 +21215,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5350,8 +21323,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5415,8 +21387,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5484,8 +21455,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5589,8 +21559,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5654,8 +21623,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5752,8 +21720,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5817,8 +21784,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5915,8 +21881,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -5980,8 +21945,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -6060,8 +22024,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -6148,6 +22111,8 @@ fi;
+      fi
+   fi
+ 
++
++  PATH="$prefix/bin:$prefix/usr/bin:$PATH"
+   # Extract the first word of "sdl-config", so it can be a program name with args.
+ set dummy sdl-config; ac_word=$2
+ echo "$as_me:$LINENO: checking for $ac_word" >&5
+@@ -6206,8 +22171,10 @@ echo $ECHO_N "checking for SDL - version
+            sed 's/\([0-9]*\).\([0-9]*\).\([0-9]*\)/\3/'`
+     if test "x$enable_sdltest" = "xyes" ; then
+       ac_save_CFLAGS="$CFLAGS"
++      ac_save_CXXFLAGS="$CXXFLAGS"
+       ac_save_LIBS="$LIBS"
+       CFLAGS="$CFLAGS $SDL_CFLAGS"
++      CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+       LIBS="$LIBS $SDL_LIBS"
+       rm -f conf.sdltest
+       if test "$cross_compiling" = yes; then
+@@ -6322,6 +22289,7 @@ echo "${ECHO_T}no" >&6
+        else
+           echo "*** Could not run SDL test program, checking why..."
+           CFLAGS="$CFLAGS $SDL_CFLAGS"
++          CXXFLAGS="$CXXFLAGS $SDL_CFLAGS"
+           LIBS="$LIBS $SDL_LIBS"
+           cat >conftest.$ac_ext <<_ACEOF
+ /* confdefs.h.  */
+@@ -6333,6 +22301,11 @@ cat >>conftest.$ac_ext <<_ACEOF
+ #include <stdio.h>
+ #include "SDL.h"
+ 
++int main(int argc, char *argv[])
++{ return 0; }
++#undef  main
++#define main K_and_R_C_main
++
+ int
+ main ()
+ {
+@@ -6350,8 +22323,7 @@ if { (eval echo "$as_me:$LINENO: \"$ac_l
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } &&
+-	 { ac_try='test -z "$ac_c_werror_flag"
+-			 || test ! -s conftest.err'
++	 { ac_try='test -z "$ac_c_werror_flag"			 || test ! -s conftest.err'
+   { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+   (eval $ac_try) 2>&5
+   ac_status=$?
+@@ -6384,10 +22356,12 @@ fi
+ rm -f conftest.err conftest.$ac_objext \
+       conftest$ac_exeext conftest.$ac_ext
+           CFLAGS="$ac_save_CFLAGS"
++          CXXFLAGS="$ac_save_CXXFLAGS"
+           LIBS="$ac_save_LIBS"
+        fi
+      fi
+      SDL_CFLAGS=""
++     SDL_CXXFLAGS=""
+      SDL_LIBS=""
+      { { echo "$as_me:$LINENO: error: *** SDL version $SDL_VERSION not found!" >&5
+ echo "$as_me: error: *** SDL version $SDL_VERSION not found!" >&2;}
+@@ -6525,6 +22499,48 @@ LIBOBJS=$ac_libobjs
+ LTLIBOBJS=$ac_ltlibobjs
+ 
+ 
++if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
++  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
++  { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"AMDEP\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
++  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
++  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
++  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++   { (exit 1); exit 1; }; }
++fi
++if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
++  { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
++Usually this means the macro was only invoked conditionally." >&5
++echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
++Usually this means the macro was only invoked conditionally." >&2;}
++   { (exit 1); exit 1; }; }
++fi
+ 
+ : ${CONFIG_STATUS=./config.status}
+ ac_clean_files_save=$ac_clean_files
+@@ -6846,6 +22862,9 @@ Usage: $0 [OPTIONS] [FILE]...
+ Configuration files:
+ $config_files
+ 
++Configuration commands:
++$config_commands
++
+ Report bugs to <bug-autoconf@gnu.org>."
+ _ACEOF
+ 
+@@ -6945,7 +22964,14 @@ fi
+ 
+ _ACEOF
+ 
++cat >>$CONFIG_STATUS <<_ACEOF
++#
++# INIT-COMMANDS section.
++#
++
++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+ 
++_ACEOF
+ 
+ 
+ 
+@@ -6955,6 +22981,7 @@ do
+   case "$ac_config_target" in
+   # Handling of arguments.
+   "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+ echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+    { (exit 1); exit 1; }; };;
+@@ -6967,6 +22994,7 @@ done
+ # bizarre bug on SunOS 4.1.3.
+ if $ac_need_defaults; then
+   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+ fi
+ 
+ # Have a temporary directory for convenience.  Make it in the build tree
+@@ -7051,13 +23079,27 @@ s,@LT_AGE@,$LT_AGE,;t t
+ s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+ s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+ s,@INSTALL_DATA@,$INSTALL_DATA,;t t
++s,@CYGPATH_W@,$CYGPATH_W,;t t
+ s,@PACKAGE@,$PACKAGE,;t t
+ s,@ACLOCAL@,$ACLOCAL,;t t
+ s,@AUTOCONF@,$AUTOCONF,;t t
+ s,@AUTOMAKE@,$AUTOMAKE,;t t
+ s,@AUTOHEADER@,$AUTOHEADER,;t t
+ s,@MAKEINFO@,$MAKEINFO,;t t
++s,@install_sh@,$install_sh,;t t
++s,@STRIP@,$STRIP,;t t
++s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
++s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
++s,@mkdir_p@,$mkdir_p,;t t
++s,@AWK@,$AWK,;t t
+ s,@SET_MAKE@,$SET_MAKE,;t t
++s,@am__leading_dot@,$am__leading_dot,;t t
++s,@AMTAR@,$AMTAR,;t t
++s,@am__tar@,$am__tar,;t t
++s,@am__untar@,$am__untar,;t t
++s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
++s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
++s,@MAINT@,$MAINT,;t t
+ s,@build@,$build,;t t
+ s,@build_cpu@,$build_cpu,;t t
+ s,@build_vendor@,$build_vendor,;t t
+@@ -7070,8 +23112,6 @@ s,@target@,$target,;t t
+ s,@target_cpu@,$target_cpu,;t t
+ s,@target_vendor@,$target_vendor,;t t
+ s,@target_os@,$target_os,;t t
+-s,@RANLIB@,$RANLIB,;t t
+-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
+ s,@CC@,$CC,;t t
+ s,@CFLAGS@,$CFLAGS,;t t
+ s,@LDFLAGS@,$LDFLAGS,;t t
+@@ -7079,12 +23119,40 @@ s,@CPPFLAGS@,$CPPFLAGS,;t t
+ s,@ac_ct_CC@,$ac_ct_CC,;t t
+ s,@EXEEXT@,$EXEEXT,;t t
+ s,@OBJEXT@,$OBJEXT,;t t
++s,@DEPDIR@,$DEPDIR,;t t
++s,@am__include@,$am__include,;t t
++s,@am__quote@,$am__quote,;t t
++s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
++s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
++s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
++s,@CCDEPMODE@,$CCDEPMODE,;t t
++s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
++s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
++s,@EGREP@,$EGREP,;t t
+ s,@LN_S@,$LN_S,;t t
+-s,@LIBTOOL@,$LIBTOOL,;t t
++s,@ECHO@,$ECHO,;t t
++s,@AR@,$AR,;t t
++s,@ac_ct_AR@,$ac_ct_AR,;t t
++s,@RANLIB@,$RANLIB,;t t
++s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
++s,@DLLTOOL@,$DLLTOOL,;t t
++s,@ac_ct_DLLTOOL@,$ac_ct_DLLTOOL,;t t
++s,@AS@,$AS,;t t
++s,@ac_ct_AS@,$ac_ct_AS,;t t
++s,@OBJDUMP@,$OBJDUMP,;t t
++s,@ac_ct_OBJDUMP@,$ac_ct_OBJDUMP,;t t
++s,@CPP@,$CPP,;t t
+ s,@CXX@,$CXX,;t t
+ s,@CXXFLAGS@,$CXXFLAGS,;t t
+ s,@ac_ct_CXX@,$ac_ct_CXX,;t t
+-s,@CPP@,$CPP,;t t
++s,@CXXDEPMODE@,$CXXDEPMODE,;t t
++s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
++s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
++s,@CXXCPP@,$CXXCPP,;t t
++s,@F77@,$F77,;t t
++s,@FFLAGS@,$FFLAGS,;t t
++s,@ac_ct_F77@,$ac_ct_F77,;t t
++s,@LIBTOOL@,$LIBTOOL,;t t
+ s,@X_CFLAGS@,$X_CFLAGS,;t t
+ s,@X_PRE_LIBS@,$X_PRE_LIBS,;t t
+ s,@X_LIBS@,$X_LIBS,;t t
+@@ -7261,11 +23329,6 @@ esac
+   *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+   esac
+ 
+-  if test x"$ac_file" != x-; then
+-    { echo "$as_me:$LINENO: creating $ac_file" >&5
+-echo "$as_me: creating $ac_file" >&6;}
+-    rm -f "$ac_file"
+-  fi
+   # Let's still pretend it is `configure' which instantiates (i.e., don't
+   # use $as_me), people would be surprised to read:
+   #    /* config.h.  Generated by config.status.  */
+@@ -7304,6 +23367,12 @@ echo "$as_me: error: cannot find input f
+ 	 fi;;
+       esac
+     done` || { (exit 1); exit 1; }
++
++  if test x"$ac_file" != x-; then
++    { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++    rm -f "$ac_file"
++  fi
+ _ACEOF
+ cat >>$CONFIG_STATUS <<_ACEOF
+   sed "$ac_vpsub
+@@ -7333,6 +23402,208 @@ s,@INSTALL@,$ac_INSTALL,;t t
+ 
+ done
+ _ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++#
++# CONFIG_COMMANDS section.
++#
++for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
++  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
++  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
++  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
++$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++	 X"$ac_dest" : 'X\(//\)[^/]' \| \
++	 X"$ac_dest" : 'X\(//\)$' \| \
++	 X"$ac_dest" : 'X\(/\)' \| \
++	 .     : '\(.\)' 2>/dev/null ||
++echo X"$ac_dest" |
++    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++  	  /^X\(\/\/\)$/{ s//\1/; q; }
++  	  /^X\(\/\).*/{ s//\1/; q; }
++  	  s/.*/./; q'`
++  { if $as_mkdir_p; then
++    mkdir -p "$ac_dir"
++  else
++    as_dir="$ac_dir"
++    as_dirs=
++    while test ! -d "$as_dir"; do
++      as_dirs="$as_dir $as_dirs"
++      as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++	 X"$as_dir" : 'X\(//\)[^/]' \| \
++	 X"$as_dir" : 'X\(//\)$' \| \
++	 X"$as_dir" : 'X\(/\)' \| \
++	 .     : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++  	  /^X\(\/\/\)$/{ s//\1/; q; }
++  	  /^X\(\/\).*/{ s//\1/; q; }
++  	  s/.*/./; q'`
++    done
++    test ! -n "$as_dirs" || mkdir $as_dirs
++  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
++   { (exit 1); exit 1; }; }; }
++
++  ac_builddir=.
++
++if test "$ac_dir" != .; then
++  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++  # A "../" for each directory in $ac_dir_suffix.
++  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++  ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++  .)  # No --srcdir option.  We are building in place.
++    ac_srcdir=.
++    if test -z "$ac_top_builddir"; then
++       ac_top_srcdir=.
++    else
++       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++    fi ;;
++  [\\/]* | ?:[\\/]* )  # Absolute path.
++    ac_srcdir=$srcdir$ac_dir_suffix;
++    ac_top_srcdir=$srcdir ;;
++  *) # Relative path.
++    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++    ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++
++# Do not use `cd foo && pwd` to compute absolute paths, because
++# the directories may not exist.
++case `pwd` in
++.) ac_abs_builddir="$ac_dir";;
++*)
++  case "$ac_dir" in
++  .) ac_abs_builddir=`pwd`;;
++  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
++  *) ac_abs_builddir=`pwd`/"$ac_dir";;
++  esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_builddir=${ac_top_builddir}.;;
++*)
++  case ${ac_top_builddir}. in
++  .) ac_abs_top_builddir=$ac_abs_builddir;;
++  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
++  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
++  esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_srcdir=$ac_srcdir;;
++*)
++  case $ac_srcdir in
++  .) ac_abs_srcdir=$ac_abs_builddir;;
++  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
++  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
++  esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_srcdir=$ac_top_srcdir;;
++*)
++  case $ac_top_srcdir in
++  .) ac_abs_top_srcdir=$ac_abs_builddir;;
++  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
++  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
++  esac;;
++esac
++
++
++  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
++echo "$as_me: executing $ac_dest commands" >&6;}
++  case $ac_dest in
++    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
++  # Strip MF so we end up with the name of the file.
++  mf=`echo "$mf" | sed -e 's/:.*$//'`
++  # Check whether this is an Automake generated Makefile or not.
++  # We used to match only the files named `Makefile.in', but
++  # some people rename them; so instead we look at the file content.
++  # Grep'ing the first line is not enough: some people post-process
++  # each Makefile.in and add a new line on top of each file to say so.
++  # So let's grep whole file.
++  if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
++    dirpart=`(dirname "$mf") 2>/dev/null ||
++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++	 X"$mf" : 'X\(//\)[^/]' \| \
++	 X"$mf" : 'X\(//\)$' \| \
++	 X"$mf" : 'X\(/\)' \| \
++	 .     : '\(.\)' 2>/dev/null ||
++echo X"$mf" |
++    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++  	  /^X\(\/\/\)$/{ s//\1/; q; }
++  	  /^X\(\/\).*/{ s//\1/; q; }
++  	  s/.*/./; q'`
++  else
++    continue
++  fi
++  # Extract the definition of DEPDIR, am__include, and am__quote
++  # from the Makefile without running `make'.
++  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
++  test -z "$DEPDIR" && continue
++  am__include=`sed -n 's/^am__include = //p' < "$mf"`
++  test -z "am__include" && continue
++  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
++  # When using ansi2knr, U may be empty or an underscore; expand it
++  U=`sed -n 's/^U = //p' < "$mf"`
++  # Find all dependency output files, they are included files with
++  # $(DEPDIR) in their names.  We invoke sed twice because it is the
++  # simplest approach to changing $(DEPDIR) to its actual value in the
++  # expansion.
++  for file in `sed -n "
++    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
++       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
++    # Make sure the directory exists.
++    test -f "$dirpart/$file" && continue
++    fdir=`(dirname "$file") 2>/dev/null ||
++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++	 X"$file" : 'X\(//\)[^/]' \| \
++	 X"$file" : 'X\(//\)$' \| \
++	 X"$file" : 'X\(/\)' \| \
++	 .     : '\(.\)' 2>/dev/null ||
++echo X"$file" |
++    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++  	  /^X\(\/\/\)$/{ s//\1/; q; }
++  	  /^X\(\/\).*/{ s//\1/; q; }
++  	  s/.*/./; q'`
++    { if $as_mkdir_p; then
++    mkdir -p $dirpart/$fdir
++  else
++    as_dir=$dirpart/$fdir
++    as_dirs=
++    while test ! -d "$as_dir"; do
++      as_dirs="$as_dir $as_dirs"
++      as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++	 X"$as_dir" : 'X\(//\)[^/]' \| \
++	 X"$as_dir" : 'X\(//\)$' \| \
++	 X"$as_dir" : 'X\(/\)' \| \
++	 .     : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++  	  /^X\(\/\/\)$/{ s//\1/; q; }
++  	  /^X\(\/\).*/{ s//\1/; q; }
++  	  s/.*/./; q'`
++    done
++    test ! -n "$as_dirs" || mkdir $as_dirs
++  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
++echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
++   { (exit 1); exit 1; }; }; }
++
++    # echo "creating $dirpart/$file"
++    echo '# dummy' > "$dirpart/$file"
++  done
++done
++ ;;
++  esac
++done
++_ACEOF
+ 
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ 
+diff -puriN SDL_gfx-2.0.13.old/depcomp SDL_gfx-2.0.13/depcomp
+--- SDL_gfx-2.0.13.old/depcomp	2004-12-21 15:25:10.000000000 +0100
++++ SDL_gfx-2.0.13/depcomp	2006-03-01 18:29:49.000000000 +0100
+@@ -1,7 +1,9 @@
+ #! /bin/sh
+-
+ # depcomp - compile a program generating dependencies as side-effects
+-# Copyright 1999, 2000, 2003 Free Software Foundation, Inc.
++
++scriptversion=2005-07-09.11
++
++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+ 
+ # This program is free software; you can redistribute it and/or modify
+ # it under the terms of the GNU General Public License as published by
+@@ -15,8 +17,8 @@
+ 
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
+ 
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+@@ -25,22 +27,45 @@
+ 
+ # Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+ 
++case $1 in
++  '')
++     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
++     exit 1;
++     ;;
++  -h | --h*)
++    cat <<\EOF
++Usage: depcomp [--help] [--version] PROGRAM [ARGS]
++
++Run PROGRAMS ARGS to compile a file, generating dependencies
++as side-effects.
++
++Environment variables:
++  depmode     Dependency tracking mode.
++  source      Source file read by `PROGRAMS ARGS'.
++  object      Object file output by `PROGRAMS ARGS'.
++  DEPDIR      directory where to store dependencies.
++  depfile     Dependency file to output.
++  tmpdepfile  Temporary file to use when outputing dependencies.
++  libtool     Whether libtool is used (yes/no).
++
++Report bugs to <bug-automake@gnu.org>.
++EOF
++    exit $?
++    ;;
++  -v | --v*)
++    echo "depcomp $scriptversion"
++    exit $?
++    ;;
++esac
++
+ if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+   echo "depcomp: Variables source, object and depmode must be set" 1>&2
+   exit 1
+ fi
+-# `libtool' can also be set to `yes' or `no'.
+-
+-if test -z "$depfile"; then
+-   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
+-   dir=`echo "$object" | sed 's,/.*$,/,'`
+-   if test "$dir" = "$object"; then
+-      dir=
+-   fi
+-   # FIXME: should be _deps on DOS.
+-   depfile="$dir.deps/$base"
+-fi
+ 
++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
++depfile=${depfile-`echo "$object" |
++  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+ 
+ rm -f "$tmpdepfile"
+@@ -262,27 +287,43 @@ tru64)
+    base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ 
+    if test "$libtool" = yes; then
+-      tmpdepfile1="$dir.libs/$base.lo.d"
+-      tmpdepfile2="$dir.libs/$base.d"
++      # With Tru64 cc, shared objects can also be used to make a
++      # static library.  This mecanism is used in libtool 1.4 series to
++      # handle both shared and static libraries in a single compilation.
++      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
++      #
++      # With libtool 1.5 this exception was removed, and libtool now
++      # generates 2 separate objects for the 2 libraries.  These two
++      # compilations output dependencies in in $dir.libs/$base.o.d and
++      # in $dir$base.o.d.  We have to check for both files, because
++      # one of the two compilations can be disabled.  We should prefer
++      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
++      # automatically cleaned when .libs/ is deleted, while ignoring
++      # the former would cause a distcleancheck panic.
++      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
++      tmpdepfile2=$dir$base.o.d          # libtool 1.5
++      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
++      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+       "$@" -Wc,-MD
+    else
+-      tmpdepfile1="$dir$base.o.d"
+-      tmpdepfile2="$dir$base.d"
++      tmpdepfile1=$dir$base.o.d
++      tmpdepfile2=$dir$base.d
++      tmpdepfile3=$dir$base.d
++      tmpdepfile4=$dir$base.d
+       "$@" -MD
+    fi
+ 
+    stat=$?
+    if test $stat -eq 0; then :
+    else
+-      rm -f "$tmpdepfile1" "$tmpdepfile2"
++      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+       exit $stat
+    fi
+ 
+-   if test -f "$tmpdepfile1"; then
+-      tmpdepfile="$tmpdepfile1"
+-   else
+-      tmpdepfile="$tmpdepfile2"
+-   fi
++   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
++   do
++     test -f "$tmpdepfile" && break
++   done
+    if test -f "$tmpdepfile"; then
+       sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+       # That's a tab and a space in the [].
+@@ -426,7 +467,8 @@ cpp)
+   done
+ 
+   "$@" -E |
+-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
++    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
++       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+     sed '$ s: \\$::' > "$tmpdepfile"
+   rm -f "$depfile"
+   echo "$object : \\" > "$depfile"
+@@ -477,3 +519,12 @@ none)
+ esac
+ 
+ exit 0
++
++# Local Variables:
++# mode: shell-script
++# sh-indentation: 2
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff -puriN SDL_gfx-2.0.13.old/install-sh SDL_gfx-2.0.13/install-sh
+--- SDL_gfx-2.0.13.old/install-sh	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/install-sh	2006-03-01 18:29:49.000000000 +0100
+@@ -1,19 +1,38 @@
+ #!/bin/sh
+-#
+ # install - install a program, script, or datafile
+-# This comes from X11R5 (mit/util/scripts/install.sh).
++
++scriptversion=2005-05-14.22
++
++# This originates from X11R5 (mit/util/scripts/install.sh), which was
++# later released in X11R6 (xc/config/util/install.sh) with the
++# following copyright and license.
++#
++# Copyright (C) 1994 X Consortium
++#
++# Permission is hereby granted, free of charge, to any person obtaining a copy
++# of this software and associated documentation files (the "Software"), to
++# deal in the Software without restriction, including without limitation the
++# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
++# sell copies of the Software, and to permit persons to whom the Software is
++# furnished to do so, subject to the following conditions:
++#
++# The above copyright notice and this permission notice shall be included in
++# all copies or substantial portions of the Software.
+ #
+-# Copyright 1991 by the Massachusetts Institute of Technology
++# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
++# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
++# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
++# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
++# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
++# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ #
+-# Permission to use, copy, modify, distribute, and sell this software and its
+-# documentation for any purpose is hereby granted without fee, provided that
+-# the above copyright notice appear in all copies and that both that
+-# copyright notice and this permission notice appear in supporting
+-# documentation, and that the name of M.I.T. not be used in advertising or
+-# publicity pertaining to distribution of the software without specific,
+-# written prior permission.  M.I.T. makes no representations about the
+-# suitability of this software for any purpose.  It is provided "as is"
+-# without express or implied warranty.
++# Except as contained in this notice, the name of the X Consortium shall not
++# be used in advertising or otherwise to promote the sale, use or other deal-
++# ings in this Software without prior written authorization from the X Consor-
++# tium.
++#
++#
++# FSF changes to this file are in the public domain.
+ #
+ # Calling this script install-sh is preferred over install.sh, to prevent
+ # `make' implicit rules from creating a file called install from it
+@@ -23,13 +42,11 @@
+ # from scratch.  It can only install one file at a time, a restriction
+ # shared with many OS's install programs.
+ 
+-
+ # set DOITPROG to echo to test this script
+ 
+ # Don't use :- since 4.3BSD and earlier shells don't like it.
+ doit="${DOITPROG-}"
+ 
+-
+ # put in absolute paths if you don't have them in your path; or use env. vars.
+ 
+ mvprog="${MVPROG-mv}"
+@@ -41,211 +58,266 @@ stripprog="${STRIPPROG-strip}"
+ rmprog="${RMPROG-rm}"
+ mkdirprog="${MKDIRPROG-mkdir}"
+ 
+-transformbasename=""
+-transform_arg=""
+-instcmd="$mvprog"
+ chmodcmd="$chmodprog 0755"
+-chowncmd=""
+-chgrpcmd=""
+-stripcmd=""
++chowncmd=
++chgrpcmd=
++stripcmd=
+ rmcmd="$rmprog -f"
+ mvcmd="$mvprog"
+-src=""
+-dst=""
+-dir_arg=""
+-
+-while [ x"$1" != x ]; do
+-    case $1 in
+-	-c) instcmd="$cpprog"
+-	    shift
+-	    continue;;
+-
+-	-d) dir_arg=true
+-	    shift
+-	    continue;;
+-
+-	-m) chmodcmd="$chmodprog $2"
+-	    shift
+-	    shift
+-	    continue;;
+-
+-	-o) chowncmd="$chownprog $2"
+-	    shift
+-	    shift
+-	    continue;;
+-
+-	-g) chgrpcmd="$chgrpprog $2"
+-	    shift
+-	    shift
+-	    continue;;
+-
+-	-s) stripcmd="$stripprog"
+-	    shift
+-	    continue;;
+-
+-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+-	    shift
+-	    continue;;
+-
+-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+-	    shift
+-	    continue;;
+-
+-	*)  if [ x"$src" = x ]
+-	    then
+-		src=$1
+-	    else
+-		# this colon is to work around a 386BSD /bin/sh bug
+-		:
+-		dst=$1
+-	    fi
+-	    shift
+-	    continue;;
+-    esac
+-done
+-
+-if [ x"$src" = x ]
+-then
+-	echo "install:	no input file specified"
+-	exit 1
+-else
+-	true
+-fi
+-
+-if [ x"$dir_arg" != x ]; then
+-	dst=$src
+-	src=""
+-	
+-	if [ -d $dst ]; then
+-		instcmd=:
+-		chmodcmd=""
+-	else
+-		instcmd=mkdir
+-	fi
+-else
+-
+-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+-# might cause directories to be created, which would be especially bad 
+-# if $src (and thus $dsttmp) contains '*'.
+-
+-	if [ -f $src -o -d $src ]
+-	then
+-		true
+-	else
+-		echo "install:  $src does not exist"
+-		exit 1
+-	fi
+-	
+-	if [ x"$dst" = x ]
+-	then
+-		echo "install:	no destination specified"
+-		exit 1
+-	else
+-		true
+-	fi
+-
+-# If destination is a directory, append the input filename; if your system
+-# does not like double slashes in filenames, you may need to add some logic
+-
+-	if [ -d $dst ]
+-	then
+-		dst="$dst"/`basename $src`
+-	else
+-		true
+-	fi
+-fi
+-
+-## this sed command emulates the dirname command
+-dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+-
+-# Make sure that the destination directory exists.
+-#  this part is taken from Noah Friedman's mkinstalldirs script
++src=
++dst=
++dir_arg=
++dstarg=
++no_target_directory=
++
++usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
++   or: $0 [OPTION]... SRCFILES... DIRECTORY
++   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
++   or: $0 [OPTION]... -d DIRECTORIES...
++
++In the 1st form, copy SRCFILE to DSTFILE.
++In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
++In the 4th, create DIRECTORIES.
++
++Options:
++-c         (ignored)
++-d         create directories instead of installing files.
++-g GROUP   $chgrpprog installed files to GROUP.
++-m MODE    $chmodprog installed files to MODE.
++-o USER    $chownprog installed files to USER.
++-s         $stripprog installed files.
++-t DIRECTORY  install into DIRECTORY.
++-T         report an error if DSTFILE is a directory.
++--help     display this help and exit.
++--version  display version info and exit.
++
++Environment variables override the default commands:
++  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
++"
++
++while test -n "$1"; do
++  case $1 in
++    -c) shift
++        continue;;
++
++    -d) dir_arg=true
++        shift
++        continue;;
++
++    -g) chgrpcmd="$chgrpprog $2"
++        shift
++        shift
++        continue;;
++
++    --help) echo "$usage"; exit $?;;
++
++    -m) chmodcmd="$chmodprog $2"
++        shift
++        shift
++        continue;;
++
++    -o) chowncmd="$chownprog $2"
++        shift
++        shift
++        continue;;
++
++    -s) stripcmd=$stripprog
++        shift
++        continue;;
+ 
+-# Skip lots of stat calls in the usual case.
+-if [ ! -d "$dstdir" ]; then
+-defaultIFS='	
+-'
+-IFS="${IFS-${defaultIFS}}"
+-
+-oIFS="${IFS}"
+-# Some sh's can't handle IFS=/ for some reason.
+-IFS='%'
+-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+-IFS="${oIFS}"
+-
+-pathcomp=''
++    -t) dstarg=$2
++	shift
++	shift
++	continue;;
+ 
+-while [ $# -ne 0 ] ; do
+-	pathcomp="${pathcomp}${1}"
++    -T) no_target_directory=true
+ 	shift
++	continue;;
+ 
+-	if [ ! -d "${pathcomp}" ] ;
+-        then
+-		$mkdirprog "${pathcomp}"
+-	else
+-		true
+-	fi
++    --version) echo "$0 $scriptversion"; exit $?;;
+ 
+-	pathcomp="${pathcomp}/"
++    *)  # When -d is used, all remaining arguments are directories to create.
++	# When -t is used, the destination is already specified.
++	test -n "$dir_arg$dstarg" && break
++        # Otherwise, the last argument is the destination.  Remove it from $@.
++	for arg
++	do
++          if test -n "$dstarg"; then
++	    # $@ is not empty: it contains at least $arg.
++	    set fnord "$@" "$dstarg"
++	    shift # fnord
++	  fi
++	  shift # arg
++	  dstarg=$arg
++	done
++	break;;
++  esac
+ done
+-fi
+-
+-if [ x"$dir_arg" != x ]
+-then
+-	$doit $instcmd $dst &&
+-
+-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
+-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
+-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
+-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
+-else
+-
+-# If we're going to rename the final executable, determine the name now.
+-
+-	if [ x"$transformarg" = x ] 
+-	then
+-		dstfile=`basename $dst`
+-	else
+-		dstfile=`basename $dst $transformbasename | 
+-			sed $transformarg`$transformbasename
+-	fi
+-
+-# don't allow the sed command to completely eliminate the filename
+-
+-	if [ x"$dstfile" = x ] 
+-	then
+-		dstfile=`basename $dst`
+-	else
+-		true
+-	fi
+-
+-# Make a temp file name in the proper directory.
+-
+-	dsttmp=$dstdir/#inst.$$#
+-
+-# Move or copy the file name to the temp name
+ 
+-	$doit $instcmd $src $dsttmp &&
+-
+-	trap "rm -f ${dsttmp}" 0 &&
+-
+-# and set any options; do chmod last to preserve setuid bits
+-
+-# If any of these fail, we abort the whole thing.  If we want to
+-# ignore errors from any of these, just make sure not to ignore
+-# errors from the above "$doit $instcmd $src $dsttmp" command.
+-
+-	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
+-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
+-	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
+-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
+-
+-# Now rename the file to the real destination.
+-
+-	$doit $rmcmd -f $dstdir/$dstfile &&
+-	$doit $mvcmd $dsttmp $dstdir/$dstfile 
++if test -z "$1"; then
++  if test -z "$dir_arg"; then
++    echo "$0: no input file specified." >&2
++    exit 1
++  fi
++  # It's OK to call `install-sh -d' without argument.
++  # This can happen when creating conditional directories.
++  exit 0
++fi
+ 
+-fi &&
++for src
++do
++  # Protect names starting with `-'.
++  case $src in
++    -*) src=./$src ;;
++  esac
++
++  if test -n "$dir_arg"; then
++    dst=$src
++    src=
++
++    if test -d "$dst"; then
++      mkdircmd=:
++      chmodcmd=
++    else
++      mkdircmd=$mkdirprog
++    fi
++  else
++    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
++    # might cause directories to be created, which would be especially bad
++    # if $src (and thus $dsttmp) contains '*'.
++    if test ! -f "$src" && test ! -d "$src"; then
++      echo "$0: $src does not exist." >&2
++      exit 1
++    fi
++
++    if test -z "$dstarg"; then
++      echo "$0: no destination specified." >&2
++      exit 1
++    fi
++
++    dst=$dstarg
++    # Protect names starting with `-'.
++    case $dst in
++      -*) dst=./$dst ;;
++    esac
+ 
++    # If destination is a directory, append the input filename; won't work
++    # if double slashes aren't ignored.
++    if test -d "$dst"; then
++      if test -n "$no_target_directory"; then
++	echo "$0: $dstarg: Is a directory" >&2
++	exit 1
++      fi
++      dst=$dst/`basename "$src"`
++    fi
++  fi
++
++  # This sed command emulates the dirname command.
++  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
++
++  # Make sure that the destination directory exists.
++
++  # Skip lots of stat calls in the usual case.
++  if test ! -d "$dstdir"; then
++    defaultIFS='
++	 '
++    IFS="${IFS-$defaultIFS}"
++
++    oIFS=$IFS
++    # Some sh's can't handle IFS=/ for some reason.
++    IFS='%'
++    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
++    shift
++    IFS=$oIFS
++
++    pathcomp=
++
++    while test $# -ne 0 ; do
++      pathcomp=$pathcomp$1
++      shift
++      if test ! -d "$pathcomp"; then
++        $mkdirprog "$pathcomp"
++	# mkdir can fail with a `File exist' error in case several
++	# install-sh are creating the directory concurrently.  This
++	# is OK.
++	test -d "$pathcomp" || exit
++      fi
++      pathcomp=$pathcomp/
++    done
++  fi
++
++  if test -n "$dir_arg"; then
++    $doit $mkdircmd "$dst" \
++      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
++      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
++      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
++      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
++
++  else
++    dstfile=`basename "$dst"`
++
++    # Make a couple of temp file names in the proper directory.
++    dsttmp=$dstdir/_inst.$$_
++    rmtmp=$dstdir/_rm.$$_
++
++    # Trap to clean up those temp files at exit.
++    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
++    trap '(exit $?); exit' 1 2 13 15
++
++    # Copy the file name to the temp name.
++    $doit $cpprog "$src" "$dsttmp" &&
++
++    # and set any options; do chmod last to preserve setuid bits.
++    #
++    # If any of these fail, we abort the whole thing.  If we want to
++    # ignore errors from any of these, just make sure not to ignore
++    # errors from the above "$doit $cpprog $src $dsttmp" command.
++    #
++    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
++      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
++      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
++      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
++
++    # Now rename the file to the real destination.
++    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
++      || {
++	   # The rename failed, perhaps because mv can't rename something else
++	   # to itself, or perhaps because mv is so ancient that it does not
++	   # support -f.
++
++	   # Now remove or move aside any old file at destination location.
++	   # We try this two ways since rm can't unlink itself on some
++	   # systems and the destination file might be busy for other
++	   # reasons.  In this case, the final cleanup might fail but the new
++	   # file should still install successfully.
++	   {
++	     if test -f "$dstdir/$dstfile"; then
++	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
++	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
++	       || {
++		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
++		 (exit 1); exit 1
++	       }
++	     else
++	       :
++	     fi
++	   } &&
++
++	   # Now rename the file to the real destination.
++	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
++	 }
++    }
++  fi || { (exit 1); exit 1; }
++done
+ 
+-exit 0
++# The final little trick to "correctly" pass the exit status to the exit trap.
++{
++  (exit 0); exit 0
++}
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff -puriN SDL_gfx-2.0.13.old/ltconfig SDL_gfx-2.0.13/ltconfig
+--- SDL_gfx-2.0.13.old/ltconfig	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/ltconfig	1970-01-01 01:00:00.000000000 +0100
+@@ -1,3122 +0,0 @@
+-#! /bin/sh
+-
+-# ltconfig - Create a system-specific libtool.
+-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+-#
+-# This file is free software; you can redistribute it and/or modify it
+-# under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
+-# (at your option) any later version.
+-#
+-# This program is distributed in the hope that it will be useful, but
+-# WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+-# General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
+-
+-# A lot of this script is taken from autoconf-2.10.
+-
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-echo=echo
+-if test "X$1" = X--no-reexec; then
+-  # Discard the --no-reexec flag, and continue.
+-  shift
+-elif test "X$1" = X--fallback-echo; then
+-  # Avoid inline document here, it may be left over
+-  :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+-  # Yippee, $echo works!
+-  :
+-else
+-  # Restart under the correct shell.
+-  exec "$SHELL" "$0" --no-reexec ${1+"$@"}
+-fi
+-
+-if test "X$1" = X--fallback-echo; then
+-  # used as fallback echo
+-  shift
+-  cat <<EOF
+-$*
+-EOF
+-  exit 0
+-fi
+-
+-# Find the correct PATH separator.  Usually this is `:', but
+-# DJGPP uses `;' like DOS.
+-if test "X${PATH_SEPARATOR+set}" != Xset; then
+-  UNAME=${UNAME-`uname 2>/dev/null`}
+-  case X$UNAME in
+-    *-DOS) PATH_SEPARATOR=';' ;;
+-    *)     PATH_SEPARATOR=':' ;;
+-  esac
+-fi
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+-
+-if test "X${echo_test_string+set}" != Xset; then
+-  # find a string as large as possible, as long as the shell can cope with it
+-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+-    if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+-       echo_test_string="`eval $cmd`" &&
+-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null; then
+-      break
+-    fi
+-  done
+-fi
+-
+-if test "X`($echo '\t') 2>/dev/null`" != 'X\t' ||
+-   test "X`($echo "$echo_test_string") 2>/dev/null`" != X"$echo_test_string"; then
+-  # The Solaris, AIX, and Digital Unix default echo programs unquote
+-  # backslashes.  This makes it impossible to quote backslashes using
+-  #   echo "$something" | sed 's/\\/\\\\/g'
+-  #
+-  # So, first we look for a working echo in the user's PATH.
+-
+-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+-  for dir in $PATH /usr/ucb; do
+-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+-       test "X`($dir/echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+-      echo="$dir/echo"
+-      break
+-    fi
+-  done
+-  IFS="$save_ifs"
+-
+-  if test "X$echo" = Xecho; then
+-    # We didn't find a better echo, so look for alternatives.
+-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+-       test "X`(print -r "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+-      # This shell has a builtin print -r that does the trick.
+-      echo='print -r'
+-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+-      # If we have ksh, try running ltconfig again with it.
+-      ORIGINAL_CONFIG_SHELL="${CONFIG_SHELL-/bin/sh}"
+-      export ORIGINAL_CONFIG_SHELL
+-      CONFIG_SHELL=/bin/ksh
+-      export CONFIG_SHELL
+-      exec "$CONFIG_SHELL" "$0" --no-reexec ${1+"$@"}
+-    else
+-      # Try using printf.
+-      echo='printf "%s\n"'
+-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+-	 test "X`($echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+-	# Cool, printf works
+-	:
+-      elif test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+-	   test "X`("$ORIGINAL_CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+-	CONFIG_SHELL="$ORIGINAL_CONFIG_SHELL"
+-	export CONFIG_SHELL
+-	SHELL="$CONFIG_SHELL"
+-	export SHELL
+-	echo="$CONFIG_SHELL $0 --fallback-echo"
+-      elif test "X`("$CONFIG_SHELL" "$0" --fallback-echo '\t') 2>/dev/null`" = 'X\t' &&
+-	   test "X`("$CONFIG_SHELL" "$0" --fallback-echo "$echo_test_string") 2>/dev/null`" = X"$echo_test_string"; then
+-	echo="$CONFIG_SHELL $0 --fallback-echo"
+-      else
+-	# maybe with a smaller string...
+-	prev=:
+-
+-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null; then
+-	    break
+-	  fi
+-	  prev="$cmd"
+-	done
+-
+-	if test "$prev" != 'sed 50q "$0"'; then
+-	  echo_test_string=`eval $prev`
+-	  export echo_test_string
+-	  exec "${ORIGINAL_CONFIG_SHELL}" "$0" ${1+"$@"}
+-	else
+-	  # Oops.  We lost completely, so just stick with echo.
+-	  echo=echo
+-	fi
+-      fi
+-    fi
+-  fi
+-fi
+-
+-# Sed substitution that helps us do robust quoting.  It backslashifies
+-# metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e s/^X//'
+-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+-
+-# Same as above, but do not quote variable references.
+-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+-
+-# Sed substitution to delay expansion of an escaped shell variable in a
+-# double_quote_subst'ed string.
+-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+-
+-# The name of this program.
+-progname=`$echo "X$0" | $Xsed -e 's%^.*/%%'`
+-
+-# Constants:
+-PROGRAM=ltconfig
+-PACKAGE=libtool
+-VERSION=1.3.5
+-TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-rm="rm -f"
+-
+-help="Try \`$progname --help' for more information."
+-
+-# Global variables:
+-default_ofile=libtool
+-can_build_shared=yes
+-enable_shared=yes
+-# All known linkers require a `.a' archive for static linking (except M$VC,
+-# which needs '.lib').
+-enable_static=yes
+-enable_fast_install=yes
+-enable_dlopen=unknown
+-enable_win32_dll=no
+-ltmain=
+-silent=
+-srcdir=
+-ac_config_guess=
+-ac_config_sub=
+-host=
+-nonopt=
+-ofile="$default_ofile"
+-verify_host=yes
+-with_gcc=no
+-with_gnu_ld=no
+-need_locks=yes
+-ac_ext=c
+-objext=o
+-libext=a
+-exeext=
+-cache_file=
+-
+-old_AR="$AR"
+-old_CC="$CC"
+-old_CFLAGS="$CFLAGS"
+-old_CPPFLAGS="$CPPFLAGS"
+-old_LDFLAGS="$LDFLAGS"
+-old_LD="$LD"
+-old_LN_S="$LN_S"
+-old_LIBS="$LIBS"
+-old_NM="$NM"
+-old_RANLIB="$RANLIB"
+-old_DLLTOOL="$DLLTOOL"
+-old_OBJDUMP="$OBJDUMP"
+-old_AS="$AS"
+-
+-# Parse the command line options.
+-args=
+-prev=
+-for option
+-do
+-  case "$option" in
+-  -*=*) optarg=`echo "$option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+-  *) optarg= ;;
+-  esac
+-
+-  # If the previous option needs an argument, assign it.
+-  if test -n "$prev"; then
+-    eval "$prev=\$option"
+-    prev=
+-    continue
+-  fi
+-
+-  case "$option" in
+-  --help) cat <<EOM
+-Usage: $progname [OPTION]... [HOST [LTMAIN]]
+-
+-Generate a system-specific libtool script.
+-
+-    --debug                enable verbose shell tracing
+-    --disable-shared       do not build shared libraries
+-    --disable-static       do not build static libraries
+-    --disable-fast-install do not optimize for fast installation
+-    --enable-dlopen        enable dlopen support
+-    --enable-win32-dll     enable building dlls on win32 hosts
+-    --help                 display this help and exit
+-    --no-verify            do not verify that HOST is a valid host type
+--o, --output=FILE          specify the output file [default=$default_ofile]
+-    --quiet                same as \`--silent'
+-    --silent               do not print informational messages
+-    --srcdir=DIR           find \`config.guess' in DIR
+-    --version              output version information and exit
+-    --with-gcc             assume that the GNU C compiler will be used
+-    --with-gnu-ld          assume that the C compiler uses the GNU linker
+-    --disable-lock         disable file locking
+-    --cache-file=FILE      configure cache file
+-
+-LTMAIN is the \`ltmain.sh' shell script fragment or \`ltmain.c' program
+-that provides basic libtool functionality.
+-
+-HOST is the canonical host system name [default=guessed].
+-EOM
+-  exit 0
+-  ;;
+-
+-  --debug)
+-    echo "$progname: enabling shell trace mode"
+-    set -x
+-    ;;
+-
+-  --disable-shared) enable_shared=no ;;
+-
+-  --disable-static) enable_static=no ;;
+-
+-  --disable-fast-install) enable_fast_install=no ;;
+-
+-  --enable-dlopen) enable_dlopen=yes ;;
+-
+-  --enable-win32-dll) enable_win32_dll=yes ;;
+-
+-  --quiet | --silent) silent=yes ;;
+-
+-  --srcdir) prev=srcdir ;;
+-  --srcdir=*) srcdir="$optarg" ;;
+-
+-  --no-verify) verify_host=no ;;
+-
+-  --output | -o) prev=ofile ;;
+-  --output=*) ofile="$optarg" ;;
+-
+-  --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"; exit 0 ;;
+-
+-  --with-gcc) with_gcc=yes ;;
+-  --with-gnu-ld) with_gnu_ld=yes ;;
+-
+-  --disable-lock) need_locks=no ;;
+-
+-  --cache-file=*) cache_file="$optarg" ;;
+-
+-  -*)
+-    echo "$progname: unrecognized option \`$option'" 1>&2
+-    echo "$help" 1>&2
+-    exit 1
+-    ;;
+-
+-  *)
+-    if test -z "$ltmain"; then
+-      ltmain="$option"
+-    elif test -z "$host"; then
+-# This generates an unnecessary warning for sparc-sun-solaris4.1.3_U1
+-#      if test -n "`echo $option| sed 's/[-a-z0-9.]//g'`"; then
+-#        echo "$progname: warning \`$option' is not a valid host type" 1>&2
+-#      fi
+-      host="$option"
+-    else
+-      echo "$progname: too many arguments" 1>&2
+-      echo "$help" 1>&2
+-      exit 1
+-    fi ;;
+-  esac
+-done
+-
+-if test -z "$ltmain"; then
+-  echo "$progname: you must specify a LTMAIN file" 1>&2
+-  echo "$help" 1>&2
+-  exit 1
+-fi
+-
+-if test ! -f "$ltmain"; then
+-  echo "$progname: \`$ltmain' does not exist" 1>&2
+-  echo "$help" 1>&2
+-  exit 1
+-fi
+-
+-# Quote any args containing shell metacharacters.
+-ltconfig_args=
+-for arg
+-do
+-  case "$arg" in
+-  *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+-  ltconfig_args="$ltconfig_args '$arg'" ;;
+-  *) ltconfig_args="$ltconfig_args $arg" ;;
+-  esac
+-done
+-
+-# A relevant subset of AC_INIT.
+-
+-# File descriptor usage:
+-# 0 standard input
+-# 1 file creation
+-# 2 errors and warnings
+-# 3 some systems may open it to /dev/tty
+-# 4 used on the Kubota Titan
+-# 5 compiler messages saved in config.log
+-# 6 checking for... messages and results
+-if test "$silent" = yes; then
+-  exec 6>/dev/null
+-else
+-  exec 6>&1
+-fi
+-exec 5>>./config.log
+-
+-# NLS nuisances.
+-# Only set LANG and LC_ALL to C if already set.
+-# These must not be set unconditionally because not all systems understand
+-# e.g. LANG=C (notably SCO).
+-if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+-if test "X${LANG+set}"   = Xset; then LANG=C;   export LANG;   fi
+-
+-if test -n "$cache_file" && test -r "$cache_file"; then
+-  echo "loading cache $cache_file within ltconfig"
+-  . $cache_file
+-fi
+-
+-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+-  # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+-  if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+-    ac_n= ac_c='
+-' ac_t='	'
+-  else
+-    ac_n=-n ac_c= ac_t=
+-  fi
+-else
+-  ac_n= ac_c='\c' ac_t=
+-fi
+-
+-if test -z "$srcdir"; then
+-  # Assume the source directory is the same one as the path to LTMAIN.
+-  srcdir=`$echo "X$ltmain" | $Xsed -e 's%/[^/]*$%%'`
+-  test "$srcdir" = "$ltmain" && srcdir=.
+-fi
+-
+-trap "$rm conftest*; exit 1" 1 2 15
+-if test "$verify_host" = yes; then
+-  # Check for config.guess and config.sub.
+-  ac_aux_dir=
+-  for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+-    if test -f $ac_dir/config.guess; then
+-      ac_aux_dir=$ac_dir
+-      break
+-    fi
+-  done
+-  if test -z "$ac_aux_dir"; then
+-    echo "$progname: cannot find config.guess in $srcdir $srcdir/.. $srcdir/../.." 1>&2
+-    echo "$help" 1>&2
+-    exit 1
+-  fi
+-  ac_config_guess=$ac_aux_dir/config.guess
+-  ac_config_sub=$ac_aux_dir/config.sub
+-
+-  # Make sure we can run config.sub.
+-  if $SHELL $ac_config_sub sun4 >/dev/null 2>&1; then :
+-  else
+-    echo "$progname: cannot run $ac_config_sub" 1>&2
+-    echo "$help" 1>&2
+-    exit 1
+-  fi
+-
+-  echo $ac_n "checking host system type""... $ac_c" 1>&6
+-
+-  host_alias=$host
+-  case "$host_alias" in
+-  "")
+-    if host_alias=`$SHELL $ac_config_guess`; then :
+-    else
+-      echo "$progname: cannot guess host type; you must specify one" 1>&2
+-      echo "$help" 1>&2
+-      exit 1
+-    fi ;;
+-  esac
+-  host=`$SHELL $ac_config_sub $host_alias`
+-  echo "$ac_t$host" 1>&6
+-
+-  # Make sure the host verified.
+-  test -z "$host" && exit 1
+-
+-elif test -z "$host"; then
+-  echo "$progname: you must specify a host type if you use \`--no-verify'" 1>&2
+-  echo "$help" 1>&2
+-  exit 1
+-else
+-  host_alias=$host
+-fi
+-
+-# Transform linux* to *-*-linux-gnu*, to support old configure scripts.
+-case "$host_os" in
+-linux-gnu*) ;;
+-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'`
+-esac
+-
+-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-
+-case "$host_os" in
+-aix3*)
+-  # AIX sometimes has problems with the GCC collect2 program.  For some
+-  # reason, if we set the COLLECT_NAMES environment variable, the problems
+-  # vanish in a puff of smoke.
+-  if test "X${COLLECT_NAMES+set}" != Xset; then
+-    COLLECT_NAMES=
+-    export COLLECT_NAMES
+-  fi
+-  ;;
+-esac
+-
+-# Determine commands to create old-style static archives.
+-old_archive_cmds='$AR cru $oldlib$oldobjs'
+-old_postinstall_cmds='chmod 644 $oldlib'
+-old_postuninstall_cmds=
+-
+-# Set a sane default for `AR'.
+-test -z "$AR" && AR=ar
+-
+-# Set a sane default for `OBJDUMP'.
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-
+-# If RANLIB is not set, then run the test.
+-if test "${RANLIB+set}" != "set"; then
+-  result=no
+-
+-  echo $ac_n "checking for ranlib... $ac_c" 1>&6
+-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+-  for dir in $PATH; do
+-    test -z "$dir" && dir=.
+-    if test -f $dir/ranlib || test -f $dir/ranlib$ac_exeext; then
+-      RANLIB="ranlib"
+-      result="ranlib"
+-      break
+-    fi
+-  done
+-  IFS="$save_ifs"
+-
+-  echo "$ac_t$result" 1>&6
+-fi
+-
+-if test -n "$RANLIB"; then
+-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+-  old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+-fi
+-
+-# Set sane defaults for `DLLTOOL', `OBJDUMP', and `AS', used on cygwin.
+-test -z "$DLLTOOL" && DLLTOOL=dlltool
+-test -z "$OBJDUMP" && OBJDUMP=objdump
+-test -z "$AS" && AS=as
+-
+-# Check to see if we are using GCC.
+-if test "$with_gcc" != yes || test -z "$CC"; then
+-  # If CC is not set, then try to find GCC or a usable CC.
+-  if test -z "$CC"; then
+-    echo $ac_n "checking for gcc... $ac_c" 1>&6
+-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+-    for dir in $PATH; do
+-      test -z "$dir" && dir=.
+-      if test -f $dir/gcc || test -f $dir/gcc$ac_exeext; then
+-	CC="gcc"
+-	break
+-      fi
+-    done
+-    IFS="$save_ifs"
+-
+-    if test -n "$CC"; then
+-      echo "$ac_t$CC" 1>&6
+-    else
+-      echo "$ac_t"no 1>&6
+-    fi
+-  fi
+-
+-  # Not "gcc", so try "cc", rejecting "/usr/ucb/cc".
+-  if test -z "$CC"; then
+-    echo $ac_n "checking for cc... $ac_c" 1>&6
+-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+-    cc_rejected=no
+-    for dir in $PATH; do
+-      test -z "$dir" && dir=.
+-      if test -f $dir/cc || test -f $dir/cc$ac_exeext; then
+-	if test "$dir/cc" = "/usr/ucb/cc"; then
+-	  cc_rejected=yes
+-	  continue
+-	fi
+-	CC="cc"
+-	break
+-      fi
+-    done
+-    IFS="$save_ifs"
+-    if test $cc_rejected = yes; then
+-      # We found a bogon in the path, so make sure we never use it.
+-      set dummy $CC
+-      shift
+-      if test $# -gt 0; then
+-	# We chose a different compiler from the bogus one.
+-	# However, it has the same name, so the bogon will be chosen
+-	# first if we set CC to just the name; use the full file name.
+-	shift
+-	set dummy "$dir/cc" "$@"
+-	shift
+-	CC="$@"
+-      fi
+-    fi
+-
+-    if test -n "$CC"; then
+-      echo "$ac_t$CC" 1>&6
+-    else
+-      echo "$ac_t"no 1>&6
+-    fi
+-
+-    if test -z "$CC"; then
+-      echo "$progname: error: no acceptable cc found in \$PATH" 1>&2
+-      exit 1
+-    fi
+-  fi
+-
+-  # Now see if the compiler is really GCC.
+-  with_gcc=no
+-  echo $ac_n "checking whether we are using GNU C... $ac_c" 1>&6
+-  echo "$progname:581: checking whether we are using GNU C" >&5
+-
+-  $rm conftest.c
+-  cat > conftest.c <<EOF
+-#ifdef __GNUC__
+-  yes;
+-#endif
+-EOF
+-  if { ac_try='${CC-cc} -E conftest.c'; { (eval echo $progname:589: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+-    with_gcc=yes
+-  fi
+-  $rm conftest.c
+-  echo "$ac_t$with_gcc" 1>&6
+-fi
+-
+-# Allow CC to be a program name with arguments.
+-set dummy $CC
+-compiler="$2"
+-
+-echo $ac_n "checking for object suffix... $ac_c" 1>&6
+-$rm conftest*
+-echo 'int i = 1;' > conftest.c
+-echo "$progname:603: checking for object suffix" >& 5
+-if { (eval echo $progname:604: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; }; then
+-  # Append any warnings to the config.log.
+-  cat conftest.err 1>&5
+-
+-  for ac_file in conftest.*; do
+-    case $ac_file in
+-    *.c) ;;
+-    *) objext=`echo $ac_file | sed -e s/conftest.//` ;;
+-    esac
+-  done
+-else
+-  cat conftest.err 1>&5
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.c >&5
+-fi
+-$rm conftest*
+-echo "$ac_t$objext" 1>&6
+-
+-echo $ac_n "checking for executable suffix... $ac_c" 1>&6
+-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  ac_cv_exeext="no"
+-  $rm conftest*
+-  echo 'main () { return 0; }' > conftest.c
+-  echo "$progname:629: checking for executable suffix" >& 5
+-  if { (eval echo $progname:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>conftest.err; }; then
+-    # Append any warnings to the config.log.
+-    cat conftest.err 1>&5
+-
+-    for ac_file in conftest.*; do
+-      case $ac_file in
+-      *.c | *.err | *.$objext ) ;;
+-      *) ac_cv_exeext=.`echo $ac_file | sed -e s/conftest.//` ;;
+-      esac
+-    done
+-  else
+-    cat conftest.err 1>&5
+-    echo "$progname: failed program was:" >&5
+-    cat conftest.c >&5
+-  fi
+-  $rm conftest*
+-fi
+-if test "X$ac_cv_exeext" = Xno; then
+-  exeext=""
+-else
+-  exeext="$ac_cv_exeext"
+-fi
+-echo "$ac_t$ac_cv_exeext" 1>&6
+-
+-echo $ac_n "checking for $compiler option to produce PIC... $ac_c" 1>&6
+-pic_flag=
+-special_shlib_compile_flags=
+-wl=
+-link_static_flag=
+-no_builtin_flag=
+-
+-if test "$with_gcc" = yes; then
+-  wl='-Wl,'
+-  link_static_flag='-static'
+-
+-  case "$host_os" in
+-  beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
+-    # PIC is the default for these OSes.
+-    ;;
+-  aix*)
+-    # Below there is a dirty hack to force normal static linking with -ldl
+-    # The problem is because libdl dynamically linked with both libc and
+-    # libC (AIX C++ library), which obviously doesn't included in libraries
+-    # list by gcc. This cause undefined symbols with -static flags.
+-    # This hack allows C programs to be linked with "-static -ldl", but
+-    # we not sure about C++ programs.
+-    link_static_flag="$link_static_flag ${wl}-lC"
+-    ;;
+-  cygwin* | mingw* | os2*)
+-    # We can build DLLs from non-PIC.
+-    ;;
+-  amigaos*)
+-    # FIXME: we need at least 68020 code to build shared libraries, but
+-    # adding the `-m68020' flag to GCC prevents building anything better,
+-    # like `-m68040'.
+-    pic_flag='-m68020 -resident32 -malways-restore-a4'
+-    ;;
+-  sysv4*MP*)
+-    if test -d /usr/nec; then
+-       pic_flag=-Kconform_pic
+-    fi
+-    ;;
+-  *)
+-    pic_flag='-fPIC'
+-    ;;
+-  esac
+-else
+-  # PORTME Check for PIC flags for the system compiler.
+-  case "$host_os" in
+-  aix3* | aix4*)
+-    # All AIX code is PIC.
+-    link_static_flag='-bnso -bI:/lib/syscalls.exp'
+-    ;;
+-
+-  hpux9* | hpux10* | hpux11*)
+-    # Is there a better link_static_flag that works with the bundled CC?
+-    wl='-Wl,'
+-    link_static_flag="${wl}-a ${wl}archive"
+-    pic_flag='+Z'
+-    ;;
+-
+-  irix5* | irix6*)
+-    wl='-Wl,'
+-    link_static_flag='-non_shared'
+-    # PIC (with -KPIC) is the default.
+-    ;;
+-
+-  cygwin* | mingw* | os2*)
+-    # We can build DLLs from non-PIC.
+-    ;;
+-
+-  osf3* | osf4* | osf5*)
+-    # All OSF/1 code is PIC.
+-    wl='-Wl,'
+-    link_static_flag='-non_shared'
+-    ;;
+-
+-  sco3.2v5*)
+-    pic_flag='-Kpic'
+-    link_static_flag='-dn'
+-    special_shlib_compile_flags='-belf'
+-    ;;
+-
+-  solaris*)
+-    pic_flag='-KPIC'
+-    link_static_flag='-Bstatic'
+-    wl='-Wl,'
+-    ;;
+-
+-  sunos4*)
+-    pic_flag='-PIC'
+-    link_static_flag='-Bstatic'
+-    wl='-Qoption ld '
+-    ;;
+-
+-  sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+-    pic_flag='-KPIC'
+-    link_static_flag='-Bstatic'
+-    wl='-Wl,'
+-    ;;
+-
+-  uts4*)
+-    pic_flag='-pic'
+-    link_static_flag='-Bstatic'
+-    ;;
+-  sysv4*MP*)
+-    if test -d /usr/nec ;then
+-      pic_flag='-Kconform_pic'
+-      link_static_flag='-Bstatic'
+-    fi
+-    ;;
+-  *)
+-    can_build_shared=no
+-    ;;
+-  esac
+-fi
+-
+-if test -n "$pic_flag"; then
+-  echo "$ac_t$pic_flag" 1>&6
+-
+-  # Check to make sure the pic_flag actually works.
+-  echo $ac_n "checking if $compiler PIC flag $pic_flag works... $ac_c" 1>&6
+-  $rm conftest*
+-  echo "int some_variable = 0;" > conftest.c
+-  save_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS $pic_flag -DPIC"
+-  echo "$progname:776: checking if $compiler PIC flag $pic_flag works" >&5
+-  if { (eval echo $progname:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.$objext; then
+-    # Append any warnings to the config.log.
+-    cat conftest.err 1>&5
+-    
+-    case "$host_os" in
+-    hpux9* | hpux10* | hpux11*)
+-      # On HP-UX, both CC and GCC only warn that PIC is supported... then they
+-      # create non-PIC objects.  So, if there were any warnings, we assume that
+-      # PIC is not supported.
+-      if test -s conftest.err; then
+-	echo "$ac_t"no 1>&6
+-	can_build_shared=no
+-	pic_flag=
+-      else
+-	echo "$ac_t"yes 1>&6
+-	pic_flag=" $pic_flag"
+-      fi
+-      ;;
+-    *)
+-      echo "$ac_t"yes 1>&6
+-      pic_flag=" $pic_flag"
+-      ;;
+-    esac
+-  else
+-    # Append any errors to the config.log.
+-    cat conftest.err 1>&5
+-    can_build_shared=no
+-    pic_flag=
+-    echo "$ac_t"no 1>&6
+-  fi
+-  CFLAGS="$save_CFLAGS"
+-  $rm conftest*
+-else
+-  echo "$ac_t"none 1>&6
+-fi
+-
+-# Check to see if options -o and -c are simultaneously supported by compiler
+-echo $ac_n "checking if $compiler supports -c -o file.o... $ac_c" 1>&6
+-$rm -r conftest 2>/dev/null
+-mkdir conftest
+-cd conftest
+-$rm conftest*
+-echo "int some_variable = 0;" > conftest.c
+-mkdir out
+-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
+-# that will create temporary files in the current directory regardless of
+-# the output directory.  Thus, making CWD read-only will cause this test
+-# to fail, enabling locking or at least warning the user not to do parallel
+-# builds.
+-chmod -w .
+-save_CFLAGS="$CFLAGS"
+-CFLAGS="$CFLAGS -o out/conftest2.o"
+-echo "$progname:829: checking if $compiler supports -c -o file.o" >&5
+-if { (eval echo $progname:830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.o; then
+-
+-  # The compiler can only warn and ignore the option if not recognized
+-  # So say no if there are warnings
+-    if test -s out/conftest.err; then
+-      echo "$ac_t"no 1>&6
+-      compiler_c_o=no
+-    else
+-      echo "$ac_t"yes 1>&6
+-      compiler_c_o=yes
+-    fi
+-else
+-  # Append any errors to the config.log.
+-  cat out/conftest.err 1>&5
+-  compiler_c_o=no
+-  echo "$ac_t"no 1>&6
+-fi
+-CFLAGS="$save_CFLAGS"
+-chmod u+w .
+-$rm conftest* out/*
+-rmdir out
+-cd ..
+-rmdir conftest
+-$rm -r conftest 2>/dev/null
+-
+-if test x"$compiler_c_o" = x"yes"; then
+-  # Check to see if we can write to a .lo
+-  echo $ac_n "checking if $compiler supports -c -o file.lo... $ac_c" 1>&6
+-  $rm conftest*
+-  echo "int some_variable = 0;" > conftest.c
+-  save_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS -c -o conftest.lo"
+-  echo "$progname:862: checking if $compiler supports -c -o file.lo" >&5
+-if { (eval echo $progname:863: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.lo; then
+-
+-    # The compiler can only warn and ignore the option if not recognized
+-    # So say no if there are warnings
+-      if test -s conftest.err; then
+-	echo "$ac_t"no 1>&6
+-	compiler_o_lo=no
+-      else
+-	echo "$ac_t"yes 1>&6
+-	compiler_o_lo=yes
+-      fi
+-  else
+-    # Append any errors to the config.log.
+-    cat conftest.err 1>&5
+-    compiler_o_lo=no
+-    echo "$ac_t"no 1>&6
+-  fi
+-  CFLAGS="$save_CFLAGS"
+-  $rm conftest*
+-else
+-  compiler_o_lo=no
+-fi
+-
+-# Check to see if we can do hard links to lock some files if needed
+-hard_links="nottested"
+-if test "$compiler_c_o" = no && test "$need_locks" != no; then
+-  # do not overwrite the value of need_locks provided by the user
+-  echo $ac_n "checking if we can lock with hard links... $ac_c" 1>&6
+-  hard_links=yes
+-  $rm conftest*
+-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+-  touch conftest.a
+-  ln conftest.a conftest.b 2>&5 || hard_links=no
+-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+-  echo "$ac_t$hard_links" 1>&6
+-  $rm conftest*
+-  if test "$hard_links" = no; then
+-    echo "*** WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2
+-    need_locks=warn
+-  fi
+-else
+-  need_locks=no
+-fi
+-
+-if test "$with_gcc" = yes; then
+-  # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+-  echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions ... $ac_c" 1>&6
+-  $rm conftest*
+-  echo "int some_variable = 0;" > conftest.c
+-  save_CFLAGS="$CFLAGS"
+-  CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.c"
+-  echo "$progname:914: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+-  if { (eval echo $progname:915: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>conftest.err; } && test -s conftest.o; then
+-
+-    # The compiler can only warn and ignore the option if not recognized
+-    # So say no if there are warnings
+-      if test -s conftest.err; then
+-	echo "$ac_t"no 1>&6
+-	compiler_rtti_exceptions=no
+-      else
+-	echo "$ac_t"yes 1>&6
+-	compiler_rtti_exceptions=yes
+-      fi
+-  else
+-    # Append any errors to the config.log.
+-    cat conftest.err 1>&5
+-    compiler_rtti_exceptions=no
+-    echo "$ac_t"no 1>&6
+-  fi
+-  CFLAGS="$save_CFLAGS"
+-  $rm conftest*
+-
+-  if test "$compiler_rtti_exceptions" = "yes"; then
+-    no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+-  else
+-    no_builtin_flag=' -fno-builtin'
+-  fi
+-  
+-fi
+-
+-# Check for any special shared library compilation flags.
+-if test -n "$special_shlib_compile_flags"; then
+-  echo "$progname: warning: \`$CC' requires \`$special_shlib_compile_flags' to build shared libraries" 1>&2
+-  if echo "$old_CC $old_CFLAGS " | egrep -e "[ 	]$special_shlib_compile_flags[ 	]" >/dev/null; then :
+-  else
+-    echo "$progname: add \`$special_shlib_compile_flags' to the CC or CFLAGS env variable and reconfigure" 1>&2
+-    can_build_shared=no
+-  fi
+-fi
+-
+-echo $ac_n "checking if $compiler static flag $link_static_flag works... $ac_c" 1>&6
+-$rm conftest*
+-echo 'main(){return(0);}' > conftest.c
+-save_LDFLAGS="$LDFLAGS"
+-LDFLAGS="$LDFLAGS $link_static_flag"
+-echo "$progname:958: checking if $compiler static flag $link_static_flag works" >&5
+-if { (eval echo $progname:959: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+-  echo "$ac_t$link_static_flag" 1>&6
+-else
+-  echo "$ac_t"none 1>&6
+-  link_static_flag=
+-fi
+-LDFLAGS="$save_LDFLAGS"
+-$rm conftest*
+-
+-if test -z "$LN_S"; then
+-  # Check to see if we can use ln -s, or we need hard links.
+-  echo $ac_n "checking whether ln -s works... $ac_c" 1>&6
+-  $rm conftest.dat
+-  if ln -s X conftest.dat 2>/dev/null; then
+-    $rm conftest.dat
+-    LN_S="ln -s"
+-  else
+-    LN_S=ln
+-  fi
+-  if test "$LN_S" = "ln -s"; then
+-    echo "$ac_t"yes 1>&6
+-  else
+-    echo "$ac_t"no 1>&6
+-  fi
+-fi
+-
+-# Make sure LD is an absolute path.
+-if test -z "$LD"; then
+-  ac_prog=ld
+-  if test "$with_gcc" = yes; then
+-    # Check if gcc -print-prog-name=ld gives a path.
+-    echo $ac_n "checking for ld used by GCC... $ac_c" 1>&6
+-    echo "$progname:991: checking for ld used by GCC" >&5
+-    ac_prog=`($CC -print-prog-name=ld) 2>&5`
+-    case "$ac_prog" in
+-    # Accept absolute paths.
+-    [\\/]* | [A-Za-z]:[\\/]*)
+-      re_direlt='/[^/][^/]*/\.\./'
+-      # Canonicalize the path of ld
+-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+-      done
+-      test -z "$LD" && LD="$ac_prog"
+-      ;;
+-    "")
+-      # If it fails, then pretend we are not using GCC.
+-      ac_prog=ld
+-      ;;
+-    *)
+-      # If it is relative, then search for the first ld in PATH.
+-      with_gnu_ld=unknown
+-      ;;
+-    esac
+-  elif test "$with_gnu_ld" = yes; then
+-    echo $ac_n "checking for GNU ld... $ac_c" 1>&6
+-    echo "$progname:1015: checking for GNU ld" >&5
+-  else
+-    echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+-    echo "$progname:1018: checking for non-GNU ld" >&5
+-  fi
+-
+-  if test -z "$LD"; then
+-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+-    for ac_dir in $PATH; do
+-      test -z "$ac_dir" && ac_dir=.
+-      if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+-	LD="$ac_dir/$ac_prog"
+-	# Check to see if the program is GNU ld.  I'd rather use --version,
+-	# but apparently some GNU ld's only accept -v.
+-	# Break only if it was the GNU/non-GNU ld that we prefer.
+-	if "$LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+-	  test "$with_gnu_ld" != no && break
+-	else
+-	  test "$with_gnu_ld" != yes && break
+-	fi
+-      fi
+-    done
+-    IFS="$ac_save_ifs"
+-  fi
+-
+-  if test -n "$LD"; then
+-    echo "$ac_t$LD" 1>&6
+-  else
+-    echo "$ac_t"no 1>&6
+-  fi
+-
+-  if test -z "$LD"; then
+-    echo "$progname: error: no acceptable ld found in \$PATH" 1>&2
+-    exit 1
+-  fi
+-fi
+-
+-# Check to see if it really is or is not GNU ld.
+-echo $ac_n "checking if the linker ($LD) is GNU ld... $ac_c" 1>&6
+-# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+-  with_gnu_ld=yes
+-else
+-  with_gnu_ld=no
+-fi
+-echo "$ac_t$with_gnu_ld" 1>&6
+-
+-# See if the linker supports building shared libraries.
+-echo $ac_n "checking whether the linker ($LD) supports shared libraries... $ac_c" 1>&6
+-
+-allow_undefined_flag=
+-no_undefined_flag=
+-need_lib_prefix=unknown
+-need_version=unknown
+-# when you set need_version to no, make sure it does not cause -set_version
+-# flags to be left without arguments
+-archive_cmds=
+-archive_expsym_cmds=
+-old_archive_from_new_cmds=
+-export_dynamic_flag_spec=
+-whole_archive_flag_spec=
+-thread_safe_flag_spec=
+-hardcode_libdir_flag_spec=
+-hardcode_libdir_separator=
+-hardcode_direct=no
+-hardcode_minus_L=no
+-hardcode_shlibpath_var=unsupported
+-runpath_var=
+-always_export_symbols=no
+-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols'
+-# include_expsyms should be a list of space-separated symbols to be *always*
+-# included in the symbol list
+-include_expsyms=
+-# exclude_expsyms can be an egrep regular expression of symbols to exclude
+-# it will be wrapped by ` (' and `)$', so one must not match beginning or
+-# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+-# as well as any symbol that contains `d'.
+-exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+-# platforms (ab)use it in PIC code, but their linkers get confused if
+-# the symbol is explicitly referenced.  Since portable code cannot
+-# rely on this symbol name, it's probably fine to never include it in
+-# preloaded symbol tables.
+-
+-case "$host_os" in
+-cygwin* | mingw*)
+-  # FIXME: the MSVC++ port hasn't been tested in a loooong time
+-  # When not using gcc, we currently assume that we are using
+-  # Microsoft Visual C++.
+-  if test "$with_gcc" != yes; then
+-    with_gnu_ld=no
+-  fi
+-  ;;
+-
+-esac
+-
+-ld_shlibs=yes
+-if test "$with_gnu_ld" = yes; then
+-  # If archive_cmds runs LD, not CC, wlarc should be empty
+-  wlarc='${wl}'
+-
+-  # See if GNU ld supports shared libraries.
+-  case "$host_os" in
+-  aix3* | aix4*)
+-    # On AIX, the GNU linker is very broken
+-    ld_shlibs=no
+-    cat <<EOF 1>&2
+-
+-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+-*** to be unable to reliably create shared libraries on AIX.
+-*** Therefore, libtool is disabling shared libraries support.  If you
+-*** really care for shared libraries, you may want to modify your PATH
+-*** so that a non-GNU linker is found, and then restart.
+-
+-EOF
+-    ;;
+-
+-  amigaos*)
+-    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+-    hardcode_libdir_flag_spec='-L$libdir'
+-    hardcode_minus_L=yes
+-
+-    # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+-    # that the semantics of dynamic libraries on AmigaOS, at least up
+-    # to version 4, is to share data among multiple programs linked
+-    # with the same dynamic library.  Since this doesn't match the
+-    # behavior of shared libraries on other platforms, we can use
+-    # them.
+-    ld_shlibs=no
+-    ;;
+-
+-  beos*)
+-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+-      #allow_undefined_flag=unsupported
+-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+-      # support --undefined.  This deserves some investigation.  FIXME
+-      archive_cmds='$CC -nostart $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+-    else
+-      ld_shlibs=no
+-    fi
+-    ;;
+-
+-  cygwin* | mingw*)
+-    # hardcode_libdir_flag_spec is actually meaningless, as there is
+-    # no search path for DLLs.
+-    hardcode_libdir_flag_spec='-L$libdir'
+-#    allow_undefined_flag=unsupported
+-    always_export_symbols=yes
+-
+-    # Extract the symbol export list from an `--export-all' def file,
+-    # then regenerate the def file from the symbol export list, so that
+-    # the compiled dll only exports the symbol export list.
+-    # Be careful not to strip the DATA tag left by newer dlltools.
+-    export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+-      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+-      $DLLTOOL --exclude-symbols _DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def  $objdir/$soname-ltdll.$objext $libobjs $convenience~
+-      sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $objdir/$soname-def > $export_symbols'
+-
+-    # If DATA tags from a recent dlltool are present, honour them!
+-    archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
+-      _lt_hint=1;
+-      cat $export_symbols | while read symbol; do
+-        set dummy \$symbol;
+-        case \$# in
+-          2) echo "	\$2 @ \$_lt_hint ; " >> $objdir/$soname-def;;
+-          *) echo "     \$2 @ \$_lt_hint \$3 ; " >> $objdir/$soname-def;;
+-        esac;
+-	_lt_hint=`expr 1 + \$_lt_hint`;
+-      done~
+-      test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
+-      test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
+-      $CC -Wl,--base-file,$objdir/$soname-base -Wl,--dll -nostartfiles -Wl,-e,_DllMain@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols _DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+-      $CC -Wl,--base-file,$objdir/$soname-base $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,_DllMain@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+-      $DLLTOOL --as=$AS --dllname $soname --exclude-symbols _DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --def $objdir/$soname-def --base-file $objdir/$soname-base --output-exp $objdir/$soname-exp~
+-      $CC $objdir/$soname-exp -Wl,--dll -nostartfiles -Wl,-e,_DllMain@12 -o $lib $objdir/$soname-ltdll.$objext $libobjs $deplibs $linkopts~
+-      : strip_is_broken_with_dlls_on_win95B - strip $lib'
+-
+-      old_archive_from_new_cmds='$DLLTOOL --as=$AS --dllname $soname --def $objdir/$soname-def --output-lib $objdir/$libname.a'
+-    ;;
+-
+-  netbsd*)
+-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+-    else
+-      archive_cmds='$LD -Bshareable $libobjs $deplibs $linkopts -o $lib'
+-      # can we support soname and/or expsyms with a.out? -oliva
+-    fi
+-    ;;
+-
+-  solaris* | sysv5*)
+-    if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+-      ld_shlibs=no
+-      cat <<EOF 1>&2
+-
+-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+-*** create shared libraries on Solaris systems.  Therefore, libtool
+-*** is disabling shared libraries support.  We urge you to upgrade GNU
+-*** binutils to release 2.9.1 or newer.  Another option is to modify
+-*** your PATH or compiler configuration so that the native linker is
+-*** used, and then restart.
+-
+-EOF
+-    elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+-    else
+-      ld_shlibs=no
+-    fi
+-    ;;      
+-
+-  sunos4*)
+-    archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linkopts'
+-    wlarc=
+-    hardcode_direct=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  *)
+-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
+-      archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+-    else
+-      ld_shlibs=no
+-    fi
+-    ;;
+-  esac
+-
+-  if test "$ld_shlibs" = yes; then
+-    runpath_var=LD_RUN_PATH
+-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+-    export_dynamic_flag_spec='${wl}--export-dynamic'
+-    case $host_os in
+-    cygwin* | mingw*)
+-      # dlltool doesn't understand --whole-archive et. al.
+-      whole_archive_flag_spec=
+-      ;;
+-    *)
+-      # ancient GNU ld didn't support --whole-archive et. al.
+-      if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+-        whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+-      else
+-        whole_archive_flag_spec=
+-      fi
+-      ;;
+-    esac
+-  fi
+-else
+-  # PORTME fill in a description of your system's linker (not GNU ld)
+-  case "$host_os" in
+-  aix3*)
+-    allow_undefined_flag=unsupported
+-    always_export_symbols=yes
+-    archive_expsym_cmds='$LD -o $objdir/$soname $libobjs $deplibs $linkopts -bE:$export_symbols -T512 -H512 -bM:SRE~$AR cru $lib $objdir/$soname'
+-    # Note: this linker hardcodes the directories in LIBPATH if there
+-    # are no directories specified by -L.
+-    hardcode_minus_L=yes
+-    if test "$with_gcc" = yes && test -z "$link_static_flag"; then
+-      # Neither direct hardcoding nor static linking is supported with a
+-      # broken collect2.
+-      hardcode_direct=unsupported
+-    fi
+-    ;;
+-
+-  aix4*)
+-    hardcode_libdir_flag_spec='${wl}-b ${wl}nolibpath ${wl}-b ${wl}libpath:$libdir:/usr/lib:/lib'
+-    hardcode_libdir_separator=':'
+-    if test "$with_gcc" = yes; then
+-      collect2name=`${CC} -print-prog-name=collect2`
+-      if test -f "$collect2name" && \
+-	 strings "$collect2name" | grep resolve_lib_name >/dev/null
+-      then
+-	# We have reworked collect2
+-	hardcode_direct=yes
+-      else
+-	# We have old collect2
+-	hardcode_direct=unsupported
+-	# It fails to find uninstalled libraries when the uninstalled
+-	# path is not listed in the libpath.  Setting hardcode_minus_L
+-	# to unsupported forces relinking
+-	hardcode_minus_L=yes
+-	hardcode_libdir_flag_spec='-L$libdir'
+-	hardcode_libdir_separator=
+-      fi
+-      shared_flag='-shared'
+-    else
+-      shared_flag='${wl}-bM:SRE'
+-      hardcode_direct=yes
+-    fi
+-    allow_undefined_flag=' ${wl}-berok'
+-    archive_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bexpall ${wl}-bnoentry${allow_undefined_flag}'
+-    archive_expsym_cmds="\$CC $shared_flag"' -o $objdir/$soname $libobjs $deplibs $linkopts ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}'
+-    case "$host_os" in aix4.[01]|aix4.[01].*)
+-      # According to Greg Wooledge, -bexpall is only supported from AIX 4.2 on
+-      always_export_symbols=yes ;;
+-    esac
+-   ;;
+-
+-  amigaos*)
+-    archive_cmds='$rm $objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $objdir/a2ixlibrary.data~$AR cru $lib $libobjs~$RANLIB $lib~(cd $objdir && a2ixlibrary -32)'
+-    hardcode_libdir_flag_spec='-L$libdir'
+-    hardcode_minus_L=yes
+-    # see comment about different semantics on the GNU ld section
+-    ld_shlibs=no
+-    ;;
+-
+-  cygwin* | mingw*)
+-    # When not using gcc, we currently assume that we are using
+-    # Microsoft Visual C++.
+-    # hardcode_libdir_flag_spec is actually meaningless, as there is
+-    # no search path for DLLs.
+-    hardcode_libdir_flag_spec=' '
+-#    allow_undefined_flag=unsupported
+-    # Tell ltmain to make .lib files, not .a files.
+-    libext=lib
+-    # FIXME: Setting linknames here is a bad hack.
+-    archive_cmds='$CC -o $lib $libobjs $linkopts `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+-    # The linker will automatically build a .lib file if we build a DLL.
+-    old_archive_from_new_cmds='true'
+-    # FIXME: Should let the user specify the lib program.
+-    old_archive_cmds='lib /OUT:$oldlib$oldobjs'
+-    fix_srcfile_path='`cygpath -w $srcfile`'
+-    ;;
+-
+-  freebsd1*)
+-    ld_shlibs=no
+-    ;;
+-
+-  # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+-  # support.  Future versions do this automatically, but an explicit c++rt0.o
+-  # does not break anything, and helps significantly (at the cost of a little
+-  # extra space).
+-  freebsd2.2*)
+-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts /usr/lib/c++rt0.o'
+-    hardcode_libdir_flag_spec='-R$libdir'
+-    hardcode_direct=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+-  freebsd2*)
+-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_direct=yes
+-    hardcode_minus_L=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+-  freebsd*)
+-    archive_cmds='$CC -shared -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_libdir_flag_spec='-R$libdir'
+-    hardcode_direct=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  hpux9* | hpux10* | hpux11*)
+-    case "$host_os" in
+-    hpux9*) archive_cmds='$rm $objdir/$soname~$LD -b +b $install_libdir -o $objdir/$soname $libobjs $deplibs $linkopts~test $objdir/$soname = $lib || mv $objdir/$soname $lib' ;;
+-    *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linkopts' ;;
+-    esac
+-    hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+-    hardcode_libdir_separator=:
+-    hardcode_direct=yes
+-    hardcode_minus_L=yes # Not in the search PATH, but as the default
+-			 # location of the library.
+-    export_dynamic_flag_spec='${wl}-E'
+-    ;;
+-
+-  irix5* | irix6*)
+-    if test "$with_gcc" = yes; then
+-      archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+-    else
+-      archive_cmds='$LD -shared $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+-    fi
+-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+-    hardcode_libdir_separator=:
+-    ;;
+-
+-  netbsd*)
+-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'  # a.out
+-    else
+-      archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linkopts'      # ELF
+-    fi
+-    hardcode_libdir_flag_spec='${wl}-R$libdir'
+-    hardcode_direct=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  openbsd*)
+-    archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_libdir_flag_spec='-R$libdir'
+-    hardcode_direct=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  os2*)
+-    hardcode_libdir_flag_spec='-L$libdir'
+-    hardcode_minus_L=yes
+-    allow_undefined_flag=unsupported
+-    archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $objdir/$libname.def~$echo DATA >> $objdir/$libname.def~$echo " SINGLE NONSHARED" >> $objdir/$libname.def~$echo EXPORTS >> $objdir/$libname.def~emxexp $libobjs >> $objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $linkopts $objdir/$libname.def'
+-    old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
+-    ;;
+-
+-  osf3*)
+-    if test "$with_gcc" = yes; then
+-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+-    else
+-      allow_undefined_flag=' -expect_unresolved \*'
+-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+-    fi
+-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+-    hardcode_libdir_separator=:
+-    ;;
+-
+-  osf4* | osf5*)  # As osf3* with the addition of the -msym flag
+-    if test "$with_gcc" = yes; then
+-      allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+-      archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+-    else
+-      allow_undefined_flag=' -expect_unresolved \*'
+-      archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+-    fi
+-    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+-    hardcode_libdir_separator=:
+-    ;;
+-  rhapsody*)
+-    archive_cmds='$CC -bundle -undefined suppress -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_libdir_flags_spec='-L$libdir'
+-    hardcode_direct=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-                                       
+-  sco3.2v5*)
+-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_shlibpath_var=no
+-    runpath_var=LD_RUN_PATH
+-    hardcode_runpath_var=yes
+-    ;;
+-
+-  solaris*)
+-    no_undefined_flag=' -z text'
+-    # $CC -shared without GNU ld will not create a library from C++
+-    # object files and a static libstdc++, better avoid it by now
+-    archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+-    hardcode_libdir_flag_spec='-R$libdir'
+-    hardcode_shlibpath_var=no
+-    case "$host_os" in
+-    solaris2.[0-5] | solaris2.[0-5].*) ;;
+-    *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+-      whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+-    esac
+-    ;;
+-
+-  sunos4*)
+-    archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_libdir_flag_spec='-L$libdir'
+-    hardcode_direct=yes
+-    hardcode_minus_L=yes
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  sysv4)
+-    if test "x$host_vendor" = xsequent; then
+-      # Use $CC to link under sequent, because it throws in some extra .o 
+-      # files that make .init and .fini sections work.
+-      archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $linkopts'
+-    else
+-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    fi
+-    runpath_var='LD_RUN_PATH'
+-    hardcode_shlibpath_var=no
+-    hardcode_direct=no #Motorola manual says yes, but my tests say they lie 
+-    ;;  
+-
+-  sysv4.3*)
+-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_shlibpath_var=no
+-    export_dynamic_flag_spec='-Bexport'
+-    ;;
+-
+-  sysv5*)
+-    no_undefined_flag=' -z text'
+-    # $CC -shared without GNU ld will not create a library from C++
+-    # object files and a static libstdc++, better avoid it by now
+-    archive_cmds='$LD -G${allow_undefined_flag} -h $rpath/$soname -o $lib $libobjs $deplibs $linkopts'
+-    archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+-		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+-    hardcode_libdir_flag_spec=
+-    hardcode_shlibpath_var=no
+-    runpath_var='LD_RUN_PATH'
+-    ;;
+-
+-  uts4*)
+-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_libdir_flag_spec='-L$libdir'
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  dgux*)
+-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_libdir_flag_spec='-L$libdir'
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  sysv4*MP*)
+-    if test -d /usr/nec; then
+-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-      hardcode_shlibpath_var=no
+-      runpath_var=LD_RUN_PATH
+-      hardcode_runpath_var=yes
+-      ld_shlibs=yes
+-    fi
+-    ;;
+-
+-  sysv4.2uw2*)
+-    archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+-    hardcode_direct=yes
+-    hardcode_minus_L=no
+-    hardcode_shlibpath_var=no
+-    hardcode_runpath_var=yes
+-    runpath_var=LD_RUN_PATH
+-    ;;
+-
+-  unixware7*)
+-    archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+-    runpath_var='LD_RUN_PATH'
+-    hardcode_shlibpath_var=no
+-    ;;
+-
+-  *)
+-    ld_shlibs=no
+-    ;;
+-  esac
+-fi
+-echo "$ac_t$ld_shlibs" 1>&6
+-test "$ld_shlibs" = no && can_build_shared=no
+-
+-if test -z "$NM"; then
+-  echo $ac_n "checking for BSD-compatible nm... $ac_c" 1>&6
+-  case "$NM" in
+-  [\\/]* | [A-Za-z]:[\\/]*) ;; # Let the user override the test with a path.
+-  *)
+-    IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+-    for ac_dir in $PATH /usr/ucb /usr/ccs/bin /bin; do
+-      test -z "$ac_dir" && ac_dir=.
+-      if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext; then
+-	# Check to see if the nm accepts a BSD-compat flag.
+-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+-	#   nm: unknown option "B" ignored
+-	if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	  NM="$ac_dir/nm -B"
+-	  break
+-	elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+-	  NM="$ac_dir/nm -p"
+-	  break
+-	else
+-	  NM=${NM="$ac_dir/nm"} # keep the first match, but
+-	  continue # so that we can try to find one that supports BSD flags
+-	fi
+-      fi
+-    done
+-    IFS="$ac_save_ifs"
+-    test -z "$NM" && NM=nm
+-    ;;
+-  esac
+-  echo "$ac_t$NM" 1>&6
+-fi
+-
+-# Check for command to grab the raw symbol name followed by C symbol from nm.
+-echo $ac_n "checking command to parse $NM output... $ac_c" 1>&6
+-
+-# These are sane defaults that work on at least a few old systems.
+-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+-
+-# Character class describing NM global symbol codes.
+-symcode='[BCDEGRST]'
+-
+-# Regexp to match symbols that can be accessed directly from C.
+-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+-
+-# Transform the above into a raw symbol and a C symbol.
+-symxfrm='\1 \2\3 \3'
+-
+-# Transform an extracted symbol line into a proper C declaration
+-global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+-
+-# Define system-specific variables.
+-case "$host_os" in
+-aix*)
+-  symcode='[BCDT]'
+-  ;;
+-cygwin* | mingw*)
+-  symcode='[ABCDGISTW]'
+-  ;;
+-hpux*) # Its linker distinguishes data from code symbols
+-  global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
+-  ;;
+-irix*)
+-  symcode='[BCDEGRST]'
+-  ;;
+-solaris*)
+-  symcode='[BDT]'
+-  ;;
+-sysv4)
+-  symcode='[DFNSTU]'
+-  ;;
+-esac
+-
+-# If we're using GNU nm, then use its standard symbol codes.
+-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+-  symcode='[ABCDGISTW]'
+-fi
+-
+-# Try without a prefix undercore, then with it.
+-for ac_symprfx in "" "_"; do
+-
+-  # Write the raw and C identifiers.
+-  global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode\)[ 	][ 	]*\($ac_symprfx\)$sympat$/$symxfrm/p'"
+-
+-  # Check to see that the pipe works correctly.
+-  pipe_works=no
+-  $rm conftest*
+-  cat > conftest.c <<EOF
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-char nm_test_var;
+-void nm_test_func(){}
+-#ifdef __cplusplus
+-}
+-#endif
+-main(){nm_test_var='a';nm_test_func();return(0);}
+-EOF
+-
+-  echo "$progname:1653: checking if global_symbol_pipe works" >&5
+-  if { (eval echo $progname:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+-    # Now try to grab the symbols.
+-    nlist=conftest.nm
+-    if { echo "$progname:1657: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+-
+-      # Try sorting and uniquifying the output.
+-      if sort "$nlist" | uniq > "$nlist"T; then
+-	mv -f "$nlist"T "$nlist"
+-      else
+-	rm -f "$nlist"T
+-      fi
+-
+-      # Make sure that we snagged all the symbols we need.
+-      if egrep ' nm_test_var$' "$nlist" >/dev/null; then
+-	if egrep ' nm_test_func$' "$nlist" >/dev/null; then
+-	  cat <<EOF > conftest.c
+-#ifdef __cplusplus
+-extern "C" {
+-#endif
+-
+-EOF
+-	  # Now generate the symbol file.
+-	  eval "$global_symbol_to_cdecl"' < "$nlist" >> conftest.c'
+-
+-	  cat <<EOF >> conftest.c
+-#if defined (__STDC__) && __STDC__
+-# define lt_ptr_t void *
+-#else
+-# define lt_ptr_t char *
+-# define const
+-#endif
+-
+-/* The mapping between symbol names and symbols. */
+-const struct {
+-  const char *name;
+-  lt_ptr_t address;
+-}
+-lt_preloaded_symbols[] =
+-{
+-EOF
+-	  sed 's/^. \(.*\) \(.*\)$/  {"\2", (lt_ptr_t) \&\2},/' < "$nlist" >> conftest.c
+-	  cat <<\EOF >> conftest.c
+-  {0, (lt_ptr_t) 0}
+-};
+-
+-#ifdef __cplusplus
+-}
+-#endif
+-EOF
+-	  # Now try linking the two files.
+-	  mv conftest.$objext conftstm.$objext
+-	  save_LIBS="$LIBS"
+-	  save_CFLAGS="$CFLAGS"
+-	  LIBS="conftstm.$objext"
+-	  CFLAGS="$CFLAGS$no_builtin_flag"
+-	  if { (eval echo $progname:1709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+-	    pipe_works=yes
+-	  else
+-	    echo "$progname: failed program was:" >&5
+-	    cat conftest.c >&5
+-	  fi
+-	  LIBS="$save_LIBS"
+-	else
+-	  echo "cannot find nm_test_func in $nlist" >&5
+-	fi
+-      else
+-	echo "cannot find nm_test_var in $nlist" >&5
+-      fi
+-    else
+-      echo "cannot run $global_symbol_pipe" >&5
+-    fi
+-  else
+-    echo "$progname: failed program was:" >&5
+-    cat conftest.c >&5
+-  fi
+-  $rm conftest* conftst*
+-
+-  # Do not use the global_symbol_pipe unless it works.
+-  if test "$pipe_works" = yes; then
+-    break
+-  else
+-    global_symbol_pipe=
+-  fi
+-done
+-if test "$pipe_works" = yes; then
+-  echo "${ac_t}ok" 1>&6
+-else
+-  echo "${ac_t}failed" 1>&6
+-fi
+-
+-if test -z "$global_symbol_pipe"; then
+-  global_symbol_to_cdecl=
+-fi
+-
+-# Check hardcoding attributes.
+-echo $ac_n "checking how to hardcode library paths into programs... $ac_c" 1>&6
+-hardcode_action=
+-if test -n "$hardcode_libdir_flag_spec" || \
+-   test -n "$runpath_var"; then
+-
+-  # We can hardcode non-existant directories.
+-  if test "$hardcode_direct" != no &&
+-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+-     # have to relink, otherwise we might link with an installed library
+-     # when we should be linking with a yet-to-be-installed one
+-     ## test "$hardcode_shlibpath_var" != no &&
+-     test "$hardcode_minus_L" != no; then
+-    # Linking always hardcodes the temporary library directory.
+-    hardcode_action=relink
+-  else
+-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+-    hardcode_action=immediate
+-  fi
+-else
+-  # We cannot hardcode anything, or else we can only hardcode existing
+-  # directories.
+-  hardcode_action=unsupported
+-fi
+-echo "$ac_t$hardcode_action" 1>&6
+-
+-
+-reload_flag=
+-reload_cmds='$LD$reload_flag -o $output$reload_objs'
+-echo $ac_n "checking for $LD option to reload object files... $ac_c" 1>&6
+-# PORTME Some linkers may need a different reload flag.
+-reload_flag='-r'
+-echo "$ac_t$reload_flag" 1>&6
+-test -n "$reload_flag" && reload_flag=" $reload_flag"
+-
+-# PORTME Fill in your ld.so characteristics
+-library_names_spec=
+-libname_spec='lib$name'
+-soname_spec=
+-postinstall_cmds=
+-postuninstall_cmds=
+-finish_cmds=
+-finish_eval=
+-shlibpath_var=
+-shlibpath_overrides_runpath=unknown
+-version_type=none
+-dynamic_linker="$host_os ld.so"
+-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+-file_magic_cmd=
+-file_magic_test_file=
+-deplibs_check_method='unknown'
+-# Need to set the preceding variable on all platforms that support
+-# interlibrary dependencies.
+-# 'none' -- dependencies not supported.
+-# `unknown' -- same as none, but documents that we really don't know.
+-# 'pass_all' -- all dependencies passed with no checks.
+-# 'test_compile' -- check by making test program.
+-# 'file_magic [regex]' -- check by looking for files in library path
+-# which responds to the $file_magic_cmd with a given egrep regex.
+-# If you have `file' or equivalent on your system and you're not sure
+-# whether `pass_all' will *always* work, you probably want this one.
+-echo $ac_n "checking dynamic linker characteristics... $ac_c" 1>&6
+-case "$host_os" in
+-aix3*)
+-  version_type=linux
+-  library_names_spec='${libname}${release}.so$versuffix $libname.a'
+-  shlibpath_var=LIBPATH
+-
+-  # AIX has no versioning support, so we append a major version to the name.
+-  soname_spec='${libname}${release}.so$major'
+-  ;;
+-
+-aix4*)
+-  version_type=linux
+-  # AIX has no versioning support, so currently we can not hardcode correct
+-  # soname into executable. Probably we can add versioning support to
+-  # collect2, so additional links can be useful in future.
+-  # We preserve .a as extension for shared libraries though AIX4.2
+-  # and later linker supports .so
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.a'
+-  shlibpath_var=LIBPATH
+-  deplibs_check_method=pass_all
+-  ;;
+-
+-amigaos*)
+-  library_names_spec='$libname.ixlibrary $libname.a'
+-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
+-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+-  ;;
+-
+-beos*)
+-  library_names_spec='${libname}.so'
+-  dynamic_linker="$host_os ld.so"
+-  shlibpath_var=LIBRARY_PATH
+-  deplibs_check_method=pass_all
+-  lt_cv_dlopen="load_add_on"
+-  lt_cv_dlopen_libs=
+-  lt_cv_dlopen_self=yes
+-  ;;
+-
+-bsdi4*)
+-  version_type=linux
+-  need_version=no
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  soname_spec='${libname}${release}.so$major'
+-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+-  file_magic_cmd=/usr/bin/file
+-  file_magic_test_file=/shlib/libc.so
+-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+-  export_dynamic_flag_spec=-rdynamic
+-  # the default ld.so.conf also contains /usr/contrib/lib and
+-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+-  # libtool to hard-code these into programs
+-  ;;
+-
+-cygwin* | mingw*)
+-  version_type=windows
+-  need_version=no
+-  need_lib_prefix=no
+-  if test "$with_gcc" = yes; then
+-    library_names_spec='`echo ${libname} | sed -e 's/^lib//g'`.dll $libname.a'
+-  else
+-    library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib'
+-  fi
+-  dynamic_linker='Win32 ld.exe'
+-  deplibs_check_method='file_magic file format pe-i386(.*architecture: i386)?'
+-  file_magic_cmd='${OBJDUMP} -f'
+-  # FIXME: first we should search . and the directory the executable is in
+-  shlibpath_var=PATH
+-  if test "$with_gcc" = yes; then
+-    # See where the system libraries really are - /usr/lib won't cut it
+-    libuser32=`$CC --print-file-name=libuser32.a`
+-    win32libs=`expr $libuser32 : '\(.*\)/.*'`
+-    sys_lib_search_path_spec="$sys_lib_search_path $win32libs"
+-  fi
+-  lt_cv_dlopen="LoadLibrary"
+-  lt_cv_dlopen_libs=
+-  ;;
+-
+-freebsd1*)
+-  dynamic_linker=no
+-  ;;
+-  
+-freebsd*)
+-  objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+-  version_type=freebsd-$objformat
+-  case "$version_type" in
+-    freebsd-elf*)
+-      deplibs_check_method='pass_all'
+-    
+-      file_magic_cmd=/usr/bin/file
+-      file_magic_test_file=`echo /usr/lib/libc.so*`
+-      library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+-      need_version=no
+-      need_lib_prefix=no
+-      ;;
+-    freebsd-*)
+-      deplibs_check_method=unknown
+-      library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix'
+-      need_version=yes
+-      ;;
+-  esac
+-  shlibpath_var=LD_LIBRARY_PATH
+-  case "$host_os" in
+-  freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
+-    shlibpath_overrides_runpath=yes
+-    ;;
+-  *) # from 3.2 on
+-    shlibpath_overrides_runpath=no
+-    ;;
+-  esac
+-  ;;
+-
+-gnu*)
+-  version_type=linux
+-  need_lib_prefix=no
+-  need_version=no
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
+-  soname_spec='${libname}${release}.so$major'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  ;;
+-
+-hpux9* | hpux10* | hpux11*)
+-  # Give a soname corresponding to the major version so that dld.sl refuses to
+-  # link against other versions.
+-  dynamic_linker="$host_os dld.sl"
+-  version_type=sunos
+-  need_lib_prefix=no
+-  need_version=no
+-  shlibpath_var=SHLIB_PATH
+-  shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+-  library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl'
+-  soname_spec='${libname}${release}.sl$major'
+-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+-  postinstall_cmds='chmod 555 $lib'
+-  case "$host_os" in
+-  hpux10.20*)
+-    # TODO:  Does this work for hpux-11 too?
+-    deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+-    file_magic_cmd=/usr/bin/file
+-    file_magic_test_file=/usr/lib/libc.sl
+-    ;;
+-  esac
+-  ;;
+-
+-irix5* | irix6*)
+-  version_type=irix
+-  need_lib_prefix=no
+-  need_version=no
+-  soname_spec='${libname}${release}.so.$major'
+-  library_names_spec='${libname}${release}.so.$versuffix ${libname}${release}.so.$major ${libname}${release}.so $libname.so'
+-  case "$host_os" in
+-  irix5*)
+-    libsuff= shlibsuff=
+-    # this will be overridden with pass_all, but let us keep it just in case
+-    deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+-    ;;
+-  *)
+-    case "$LD" in # libtool.m4 will add one of these switches to LD
+-    *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;;
+-    *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;;
+-    *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
+-    *) libsuff= shlibsuff= libmagic=never-match;;
+-    esac
+-    ;;
+-  esac
+-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+-  shlibpath_overrides_runpath=no
+-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+-  file_magic_cmd=/usr/bin/file
+-  file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+-  deplibs_check_method='pass_all'
+-  ;;
+-
+-# No shared lib support for Linux oldld, aout, or coff.
+-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*)
+-  dynamic_linker=no
+-  ;;
+-
+-# This must be Linux ELF.
+-linux-gnu*)
+-  version_type=linux
+-  need_lib_prefix=no
+-  need_version=no
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  soname_spec='${libname}${release}.so$major'
+-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  shlibpath_overrides_runpath=no
+-  deplibs_check_method=pass_all
+-
+-  if test -f /lib/ld.so.1; then
+-    dynamic_linker='GNU ld.so'
+-  else
+-    # Only the GNU ld.so supports shared libraries on MkLinux.
+-    case "$host_cpu" in
+-    powerpc*) dynamic_linker=no ;;
+-    *) dynamic_linker='Linux ld.so' ;;
+-    esac
+-  fi
+-  ;;
+-
+-netbsd*)
+-  version_type=sunos
+-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+-    library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+-    dynamic_linker='NetBSD (a.out) ld.so'
+-  else
+-    library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so'
+-    soname_spec='${libname}${release}.so$major'
+-    dynamic_linker='NetBSD ld.elf_so'
+-  fi
+-  shlibpath_var=LD_LIBRARY_PATH
+-  ;;
+-
+-openbsd*)
+-  version_type=sunos
+-  if test "$with_gnu_ld" = yes; then
+-    need_lib_prefix=no
+-    need_version=no
+-  fi
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  ;;
+-
+-os2*)
+-  libname_spec='$name'
+-  need_lib_prefix=no
+-  library_names_spec='$libname.dll $libname.a'
+-  dynamic_linker='OS/2 ld.exe'
+-  shlibpath_var=LIBPATH
+-  ;;
+-
+-osf3* | osf4* | osf5*)
+-  version_type=osf
+-  need_version=no
+-  soname_spec='${libname}${release}.so'
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  # this will be overridden with pass_all, but let us keep it just in case
+-  deplibs_check_method='file_magic COFF format alpha shared library'
+-  file_magic_cmd=/usr/bin/file
+-  file_magic_test_file=/shlib/libc.so
+-  deplibs_check_method='pass_all'
+-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+-  ;;
+-
+-rhapsody*)
+-  version_type=sunos
+-  library_names_spec='${libname}.so'
+-  soname_spec='${libname}.so'
+-  shlibpath_var=DYLD_LIBRARY_PATH
+-  deplibs_check_method=pass_all
+-  ;;
+-
+-sco3.2v5*)
+-  version_type=osf
+-  soname_spec='${libname}${release}.so$major'
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  ;;
+-
+-solaris*)
+-  version_type=linux
+-  need_lib_prefix=no
+-  need_version=no
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  soname_spec='${libname}${release}.so$major'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  shlibpath_overrides_runpath=yes
+-  # ldd complains unless libraries are executable
+-  postinstall_cmds='chmod +x $lib'
+-  deplibs_check_method="file_magic ELF [0-9][0-9]-bit [LM]SB dynamic lib"
+-  file_magic_cmd=/usr/bin/file
+-  file_magic_test_file=/lib/libc.so
+-  ;;
+-
+-sunos4*)
+-  version_type=sunos
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  shlibpath_overrides_runpath=yes
+-  if test "$with_gnu_ld" = yes; then
+-    need_lib_prefix=no
+-  fi
+-  need_version=yes
+-  ;;
+-
+-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+-  version_type=linux
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  soname_spec='${libname}${release}.so$major'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  case "$host_vendor" in
+-    sequent)
+-      file_magic_cmd='/bin/file'
+-      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+-      ;;
+-    ncr)
+-      deplibs_check_method='pass_all'
+-      ;;
+-    motorola)
+-      need_lib_prefix=no
+-      need_version=no
+-      shlibpath_overrides_runpath=no
+-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+-      deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+-      file_magic_cmd=/usr/bin/file
+-      file_magic_test_file=`echo /usr/lib/libc.so*`
+-      ;;
+-  esac
+-  ;;
+-
+-uts4*)
+-  version_type=linux
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  soname_spec='${libname}${release}.so$major'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  ;;
+-
+-dgux*)
+-  version_type=linux
+-  need_lib_prefix=no
+-  need_version=no
+-  library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+-  soname_spec='${libname}${release}.so$major'
+-  shlibpath_var=LD_LIBRARY_PATH
+-  ;;
+-
+-sysv4*MP*)
+-  if test -d /usr/nec ;then
+-    version_type=linux
+-    library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so'
+-    soname_spec='$libname.so.$major'
+-    shlibpath_var=LD_LIBRARY_PATH
+-  fi
+-  ;;
+-
+-*)
+-  dynamic_linker=no
+-  ;;
+-esac
+-echo "$ac_t$dynamic_linker" 1>&6
+-test "$dynamic_linker" = no && can_build_shared=no
+-
+-# Report the final consequences.
+-echo "checking if libtool supports shared libraries... $can_build_shared" 1>&6
+-
+-# Only try to build win32 dlls if AC_LIBTOOL_WIN32_DLL was used in
+-# configure.in, otherwise build static only libraries.
+-case "$host_os" in
+-cygwin* | mingw* | os2*)
+-  if test x$can_build_shared = xyes; then
+-    test x$enable_win32_dll = xno && can_build_shared=no
+-    echo "checking if package supports dlls... $can_build_shared" 1>&6
+-  fi
+-;;
+-esac
+-
+-if test -n "$file_magic_test_file" && test -n "$file_magic_cmd"; then
+-  case "$deplibs_check_method" in
+-  "file_magic "*)
+-    file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+-    if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+-       egrep "$file_magic_regex" > /dev/null; then
+-      :
+-    else
+-      cat <<EOF 1>&2
+-
+-*** Warning: the command libtool uses to detect shared libraries,
+-*** $file_magic_cmd, produces output that libtool cannot recognize.
+-*** The result is that libtool may fail to recognize shared libraries
+-*** as such.  This will affect the creation of libtool libraries that
+-*** depend on shared libraries, but programs linked with such libtool
+-*** libraries will work regardless of this problem.  Nevertheless, you
+-*** may want to report the problem to your system manager and/or to
+-*** bug-libtool@gnu.org
+-
+-EOF
+-    fi ;;
+-  esac
+-fi
+-
+-echo $ac_n "checking whether to build shared libraries... $ac_c" 1>&6
+-test "$can_build_shared" = "no" && enable_shared=no
+-
+-# On AIX, shared libraries and static libraries use the same namespace, and
+-# are all built from PIC.
+-case "$host_os" in
+-aix3*)
+-  test "$enable_shared" = yes && enable_static=no
+-  if test -n "$RANLIB"; then
+-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
+-    postinstall_cmds='$RANLIB $lib'
+-  fi
+-  ;;
+-
+-aix4*)
+-  test "$enable_shared" = yes && enable_static=no
+-  ;;
+-esac
+-
+-echo "$ac_t$enable_shared" 1>&6
+-
+-# Make sure either enable_shared or enable_static is yes.
+-test "$enable_shared" = yes || enable_static=yes
+-
+-echo "checking whether to build static libraries... $enable_static" 1>&6
+-
+-if test "$hardcode_action" = relink; then
+-  # Fast installation is not supported
+-  enable_fast_install=no
+-elif test "$shlibpath_overrides_runpath" = yes ||
+-     test "$enable_shared" = no; then
+-  # Fast installation is not necessary
+-  enable_fast_install=needless
+-fi
+-
+-echo $ac_n "checking for objdir... $ac_c" 1>&6
+-rm -f .libs 2>/dev/null
+-mkdir .libs 2>/dev/null
+-if test -d .libs; then
+-  objdir=.libs
+-else
+-  # MS-DOS does not allow filenames that begin with a dot.
+-  objdir=_libs
+-fi
+-rmdir .libs 2>/dev/null
+-echo "$ac_t$objdir" 1>&6
+-
+-if test "x$enable_dlopen" != xyes; then
+-  enable_dlopen=unknown
+-  enable_dlopen_self=unknown
+-  enable_dlopen_self_static=unknown
+-else
+-if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
+-  lt_cv_dlopen=no lt_cv_dlopen_libs=
+-echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+-echo "$progname:2248: checking for dlopen in -ldl" >&5
+-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  ac_save_LIBS="$LIBS"
+-LIBS="-ldl  $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 2256 "ltconfig"
+-/* Override any gcc2 internal prototype to avoid an error.  */
+-/* We use char because int might match the return type of a gcc2
+-    builtin and then its argument prototype would still apply.  */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dlopen();
+-
+-int main() {
+-dlopen()
+-; return 0; }
+-EOF
+-if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+-  rm -rf conftest*
+-  eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -rf conftest*
+-  eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+-  echo "$ac_t""yes" 1>&6
+-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+-else
+-  echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+-echo "$progname:2288: checking for dlopen" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  cat > conftest.$ac_ext <<EOF
+-#line 2293 "ltconfig"
+-/* System header to define __stub macros and hopefully few prototypes,
+-    which can conflict with char dlopen(); below.  */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error.  */
+-/* We use char because int might match the return type of a gcc2
+-    builtin and then its argument prototype would still apply.  */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dlopen();
+-
+-int main() {
+-
+-/* The GNU C library defines this for functions which it implements
+-    to always fail with ENOSYS.  Some functions are actually named
+-    something starting with __ and the normal name is an alias.  */
+-#if defined (__stub_dlopen) || defined (__stub___dlopen)
+-choke me
+-#else
+-dlopen();
+-#endif
+-
+-; return 0; }
+-EOF
+-if { (eval echo $progname:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+-  rm -rf conftest*
+-  eval "ac_cv_func_dlopen=yes"
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -rf conftest*
+-  eval "ac_cv_func_dlopen=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+-  echo "$ac_t""yes" 1>&6
+-  lt_cv_dlopen="dlopen"
+-else
+-  echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
+-echo "$progname:2335: checking for dld_link in -ldld" >&5
+-ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  ac_save_LIBS="$LIBS"
+-LIBS="-ldld  $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 2343 "ltconfig"
+-/* Override any gcc2 internal prototype to avoid an error.  */
+-/* We use char because int might match the return type of a gcc2
+-    builtin and then its argument prototype would still apply.  */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char dld_link();
+-
+-int main() {
+-dld_link()
+-; return 0; }
+-EOF
+-if { (eval echo $progname:2356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+-  rm -rf conftest*
+-  eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -rf conftest*
+-  eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+-  echo "$ac_t""yes" 1>&6
+-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+-else
+-  echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+-echo "$progname:2375: checking for shl_load" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  cat > conftest.$ac_ext <<EOF
+-#line 2380 "ltconfig"
+-/* System header to define __stub macros and hopefully few prototypes,
+-    which can conflict with char shl_load(); below.  */
+-#include <assert.h>
+-/* Override any gcc2 internal prototype to avoid an error.  */
+-/* We use char because int might match the return type of a gcc2
+-    builtin and then its argument prototype would still apply.  */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char shl_load();
+-
+-int main() {
+-
+-/* The GNU C library defines this for functions which it implements
+-    to always fail with ENOSYS.  Some functions are actually named
+-    something starting with __ and the normal name is an alias.  */
+-#if defined (__stub_shl_load) || defined (__stub___shl_load)
+-choke me
+-#else
+-shl_load();
+-#endif
+-
+-; return 0; }
+-EOF
+-if { (eval echo $progname:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+-  rm -rf conftest*
+-  eval "ac_cv_func_shl_load=yes"
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -rf conftest*
+-  eval "ac_cv_func_shl_load=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+-  echo "$ac_t""yes" 1>&6
+-  lt_cv_dlopen="shl_load"
+-else
+-  echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+-echo "$progname:2423: checking for shl_load in -ldld" >&5
+-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  ac_save_LIBS="$LIBS"
+-LIBS="-ldld  $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 2431 "ltconfig"
+-#include "confdefs.h"
+-/* Override any gcc2 internal prototype to avoid an error.  */
+-/* We use char because int might match the return type of a gcc2
+-    builtin and then its argument prototype would still apply.  */
+-#ifdef __cplusplus
+-extern "C"
+-#endif
+-char shl_load();
+-
+-int main() {
+-shl_load()
+-; return 0; }
+-EOF
+-if { (eval echo $progname:2445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+-  rm -rf conftest*
+-  eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -rf conftest*
+-  eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+-  echo "$ac_t""yes" 1>&6
+-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+-else
+-  echo "$ac_t""no" 1>&6
+-fi
+-
+-
+-fi
+-
+-    
+-fi
+-
+-  
+-fi
+-
+-
+-fi
+-
+-fi
+-
+-  if test "x$lt_cv_dlopen" != xno; then
+-    enable_dlopen=yes
+-  fi
+-
+-  case "$lt_cv_dlopen" in
+-  dlopen)
+-for ac_hdr in dlfcn.h; do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "$progname:2488: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  cat > conftest.$ac_ext <<EOF
+-#line 2493 "ltconfig"
+-#include <$ac_hdr>
+-int fnord = 0;
+-EOF
+-ac_try="$ac_compile >/dev/null 2>conftest.out"
+-{ (eval echo $progname:2498: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+-  rm -rf conftest*
+-  eval "ac_cv_header_$ac_safe=yes"
+-else
+-  echo "$ac_err" >&5
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -rf conftest*
+-  eval "ac_cv_header_$ac_safe=no"
+-fi
+-rm -f conftest*
+-fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+-  echo "$ac_t""yes" 1>&6
+-else
+-  echo "$ac_t""no" 1>&6
+-fi
+-done
+-
+-    if test "x$ac_cv_header_dlfcn_h" = xyes; then
+-      CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+-    fi
+-    eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+-    LIBS="$lt_cv_dlopen_libs $LIBS"
+-
+-  echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+-echo "$progname:2526: checking whether a program can dlopen itself" >&5
+-if test "${lt_cv_dlopen_self+set}" = set; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  if test "$cross_compiling" = yes; then
+-    lt_cv_dlopen_self=cross
+-  else
+-    cat > conftest.c <<EOF
+-#line 2534 "ltconfig"
+-
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+-
+-#include <stdio.h>
+-
+-#ifdef RTLD_GLOBAL
+-# define LTDL_GLOBAL	RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-#  define LTDL_GLOBAL	DL_GLOBAL
+-# else
+-#  define LTDL_GLOBAL	0
+-# endif
+-#endif
+-
+-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+-   find out it does not work in some platform. */
+-#ifndef LTDL_LAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+-# else
+-#  ifdef DL_LAZY
+-#   define LTDL_LAZY_OR_NOW	DL_LAZY
+-#  else
+-#   ifdef RTLD_NOW
+-#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+-#   else
+-#    ifdef DL_NOW
+-#     define LTDL_LAZY_OR_NOW	DL_NOW
+-#    else
+-#     define LTDL_LAZY_OR_NOW	0
+-#    endif
+-#   endif
+-#  endif
+-# endif
+-#endif
+-
+-fnord() { int i=42;}
+-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+-    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+-	       if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+-
+-EOF
+-if { (eval echo $progname:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
+-  lt_cv_dlopen_self=yes
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -fr conftest*
+-  lt_cv_dlopen_self=no
+-fi
+-rm -fr conftest*
+-fi
+-
+-fi
+-
+-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
+-
+-  if test "$lt_cv_dlopen_self" = yes; then
+-    LDFLAGS="$LDFLAGS $link_static_flag"
+-  echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+-echo "$progname:2599: checking whether a statically linked program can dlopen itself" >&5
+-if test "${lt_cv_dlopen_self_static+set}" = set; then
+-  echo $ac_n "(cached) $ac_c" 1>&6
+-else
+-  if test "$cross_compiling" = yes; then
+-    lt_cv_dlopen_self_static=cross
+-  else
+-    cat > conftest.c <<EOF
+-#line 2607 "ltconfig"
+-
+-#if HAVE_DLFCN_H
+-#include <dlfcn.h>
+-#endif
+-
+-#include <stdio.h>
+-
+-#ifdef RTLD_GLOBAL
+-# define LTDL_GLOBAL	RTLD_GLOBAL
+-#else
+-# ifdef DL_GLOBAL
+-#  define LTDL_GLOBAL	DL_GLOBAL
+-# else
+-#  define LTDL_GLOBAL	0
+-# endif
+-#endif
+-
+-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
+-   find out it does not work in some platform. */
+-#ifndef LTDL_LAZY_OR_NOW
+-# ifdef RTLD_LAZY
+-#  define LTDL_LAZY_OR_NOW	RTLD_LAZY
+-# else
+-#  ifdef DL_LAZY
+-#   define LTDL_LAZY_OR_NOW	DL_LAZY
+-#  else
+-#   ifdef RTLD_NOW
+-#    define LTDL_LAZY_OR_NOW	RTLD_NOW
+-#   else
+-#    ifdef DL_NOW
+-#     define LTDL_LAZY_OR_NOW	DL_NOW
+-#    else
+-#     define LTDL_LAZY_OR_NOW	0
+-#    endif
+-#   endif
+-#  endif
+-# endif
+-#endif
+-
+-fnord() { int i=42;}
+-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
+-    if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
+-    if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); } 
+-
+-EOF
+-if { (eval echo $progname:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+-then
+-  lt_cv_dlopen_self_static=yes
+-else
+-  echo "$progname: failed program was:" >&5
+-  cat conftest.$ac_ext >&5
+-  rm -fr conftest*
+-  lt_cv_dlopen_self_static=no
+-fi
+-rm -fr conftest*
+-fi
+-
+-fi
+-
+-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
+-fi
+-    ;;
+-  esac
+-
+-  case "$lt_cv_dlopen_self" in
+-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+-  *) enable_dlopen_self=unknown ;;
+-  esac
+-
+-  case "$lt_cv_dlopen_self_static" in
+-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+-  *) enable_dlopen_self_static=unknown ;;
+-  esac
+-fi
+-
+-# Copy echo and quote the copy, instead of the original, because it is
+-# used later.
+-ltecho="$echo"
+-if test "X$ltecho" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+-   ltecho="$CONFIG_SHELL \$0 --fallback-echo"
+-fi
+-LTSHELL="$SHELL"
+-
+-LTCONFIG_VERSION="$VERSION"
+-
+-# Only quote variables if we're using ltmain.sh.
+-case "$ltmain" in
+-*.sh)
+-  # Now quote all the things that may contain metacharacters.
+-  for var in ltecho old_CC old_CFLAGS old_CPPFLAGS \
+-    old_LD old_LDFLAGS old_LIBS \
+-    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS \
+-    AR CC LD LN_S NM LTSHELL LTCONFIG_VERSION \
+-    reload_flag reload_cmds wl \
+-    pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+-    thread_safe_flag_spec whole_archive_flag_spec libname_spec \
+-    library_names_spec soname_spec \
+-    RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \
+-    old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds postuninstall_cmds \
+-    file_magic_cmd export_symbols_cmds deplibs_check_method allow_undefined_flag no_undefined_flag \
+-    finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
+-    hardcode_libdir_flag_spec hardcode_libdir_separator  \
+-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+-    compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+-
+-    case "$var" in
+-    reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \
+-    old_postinstall_cmds | old_postuninstall_cmds | \
+-    export_symbols_cmds | archive_cmds | archive_expsym_cmds | \
+-    postinstall_cmds | postuninstall_cmds | \
+-    finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+-      # Double-quote double-evaled strings.
+-      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+-      ;;
+-    *)
+-      eval "$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+-      ;;
+-    esac
+-  done
+-
+-  case "$ltecho" in
+-  *'\$0 --fallback-echo"')
+-    ltecho=`$echo "X$ltecho" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+-    ;;
+-  esac
+-
+-  trap "$rm \"$ofile\"; exit 1" 1 2 15
+-  echo "creating $ofile"
+-  $rm "$ofile"
+-  cat <<EOF > "$ofile"
+-#! $SHELL
+-
+-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+-# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
+-#
+-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
+-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+-#
+-# This program is free software; you can redistribute it and/or modify
+-# it under the terms of the GNU General Public License as published by
+-# the Free Software Foundation; either version 2 of the License, or
+-# (at your option) any later version.
+-#
+-# This program is distributed in the hope that it will be useful, but
+-# WITHOUT ANY WARRANTY; without even the implied warranty of
+-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+-# General Public License for more details.
+-#
+-# You should have received a copy of the GNU General Public License
+-# along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#
+-# As a special exception to the GNU General Public License, if you
+-# distribute this file as part of a program that contains a
+-# configuration script generated by Autoconf, you may include it under
+-# the same distribution terms that you use for the rest of that program.
+-
+-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+-Xsed="sed -e s/^X//"
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+-
+-### BEGIN LIBTOOL CONFIG
+-EOF
+-  cfgfile="$ofile"
+-  ;;
+-
+-*)
+-  # Double-quote the variables that need it (for aesthetics).
+-  for var in old_CC old_CFLAGS old_CPPFLAGS \
+-    old_LD old_LDFLAGS old_LIBS \
+-    old_NM old_RANLIB old_LN_S old_DLLTOOL old_OBJDUMP old_AS; do
+-    eval "$var=\\\"\$var\\\""
+-  done
+-
+-  # Just create a config file.
+-  cfgfile="$ofile.cfg"
+-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+-  echo "creating $cfgfile"
+-  $rm "$cfgfile"
+-  cat <<EOF > "$cfgfile"
+-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Libtool configuration file.
+-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+-EOF
+-  ;;
+-esac
+-
+-cat <<EOF >> "$cfgfile"
+-# Libtool was configured as follows, on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-#
+-# CC=$old_CC CFLAGS=$old_CFLAGS CPPFLAGS=$old_CPPFLAGS \\
+-# LD=$old_LD LDFLAGS=$old_LDFLAGS LIBS=$old_LIBS \\
+-# NM=$old_NM RANLIB=$old_RANLIB LN_S=$old_LN_S \\
+-# DLLTOOL=$old_DLLTOOL OBJDUMP=$old_OBJDUMP AS=$old_AS \\
+-#   $0$ltconfig_args
+-#
+-# Compiler and other test output produced by $progname, useful for
+-# debugging $progname, is in ./config.log if it exists.
+-
+-# The version of $progname that generated this script.
+-LTCONFIG_VERSION=$LTCONFIG_VERSION
+-
+-# Shell to use when invoking shell scripts.
+-SHELL=$LTSHELL
+-
+-# Whether or not to build shared libraries.
+-build_libtool_libs=$enable_shared
+-
+-# Whether or not to build static libraries.
+-build_old_libs=$enable_static
+-
+-# Whether or not to optimize for fast installation.
+-fast_install=$enable_fast_install
+-
+-# The host system.
+-host_alias=$host_alias
+-host=$host
+-
+-# An echo program that does not interpret backslashes.
+-echo=$ltecho
+-
+-# The archiver.
+-AR=$AR
+-
+-# The default C compiler.
+-CC=$CC
+-
+-# The linker used to build libraries.
+-LD=$LD
+-
+-# Whether we need hard or soft links.
+-LN_S=$LN_S
+-
+-# A BSD-compatible nm program.
+-NM=$NM
+-
+-# Used on cygwin: DLL creation program.
+-DLLTOOL="$DLLTOOL"
+-
+-# Used on cygwin: object dumper.
+-OBJDUMP="$OBJDUMP"
+-
+-# Used on cygwin: assembler.
+-AS="$AS"
+-
+-# The name of the directory that contains temporary libtool files.
+-objdir=$objdir
+-
+-# How to create reloadable object files.
+-reload_flag=$reload_flag
+-reload_cmds=$reload_cmds
+-
+-# How to pass a linker flag through the compiler.
+-wl=$wl
+-
+-# Object file suffix (normally "o").
+-objext="$objext"
+-
+-# Old archive suffix (normally "a").
+-libext="$libext"
+-
+-# Executable file suffix (normally "").
+-exeext="$exeext"
+-
+-# Additional compiler flags for building library objects.
+-pic_flag=$pic_flag
+-
+-# Does compiler simultaneously support -c and -o options?
+-compiler_c_o=$compiler_c_o
+-
+-# Can we write directly to a .lo ?
+-compiler_o_lo=$compiler_o_lo
+-
+-# Must we lock files when doing compilation ?
+-need_locks=$need_locks
+-
+-# Do we need the lib prefix for modules?
+-need_lib_prefix=$need_lib_prefix
+-
+-# Do we need a version for libraries?
+-need_version=$need_version
+-
+-# Whether dlopen is supported.
+-dlopen=$enable_dlopen
+-
+-# Whether dlopen of programs is supported.
+-dlopen_self=$enable_dlopen_self
+-
+-# Whether dlopen of statically linked programs is supported.
+-dlopen_self_static=$enable_dlopen_self_static
+-
+-# Compiler flag to prevent dynamic linking.
+-link_static_flag=$link_static_flag
+-
+-# Compiler flag to turn off builtin functions.
+-no_builtin_flag=$no_builtin_flag
+-
+-# Compiler flag to allow reflexive dlopens.
+-export_dynamic_flag_spec=$export_dynamic_flag_spec
+-
+-# Compiler flag to generate shared objects directly from archives.
+-whole_archive_flag_spec=$whole_archive_flag_spec
+-
+-# Compiler flag to generate thread-safe objects.
+-thread_safe_flag_spec=$thread_safe_flag_spec
+-
+-# Library versioning type.
+-version_type=$version_type
+-
+-# Format of library name prefix.
+-libname_spec=$libname_spec
+-
+-# List of archive names.  First name is the real one, the rest are links.
+-# The last name is the one that the linker finds with -lNAME.
+-library_names_spec=$library_names_spec
+-
+-# The coded name of the library, if different from the real name.
+-soname_spec=$soname_spec
+-
+-# Commands used to build and install an old-style archive.
+-RANLIB=$RANLIB
+-old_archive_cmds=$old_archive_cmds
+-old_postinstall_cmds=$old_postinstall_cmds
+-old_postuninstall_cmds=$old_postuninstall_cmds
+-
+-# Create an old-style archive from a shared archive.
+-old_archive_from_new_cmds=$old_archive_from_new_cmds
+-
+-# Commands used to build and install a shared archive.
+-archive_cmds=$archive_cmds
+-archive_expsym_cmds=$archive_expsym_cmds
+-postinstall_cmds=$postinstall_cmds
+-postuninstall_cmds=$postuninstall_cmds
+-
+-# Method to check whether dependent libraries are shared objects.
+-deplibs_check_method=$deplibs_check_method
+-
+-# Command to use when deplibs_check_method == file_magic.
+-file_magic_cmd=$file_magic_cmd
+-
+-# Flag that allows shared libraries with undefined symbols to be built.
+-allow_undefined_flag=$allow_undefined_flag
+-
+-# Flag that forces no undefined symbols.
+-no_undefined_flag=$no_undefined_flag
+-
+-# Commands used to finish a libtool library installation in a directory.
+-finish_cmds=$finish_cmds
+-
+-# Same as above, but a single script fragment to be evaled but not shown.
+-finish_eval=$finish_eval
+-
+-# Take the output of nm and produce a listing of raw symbols and C names.
+-global_symbol_pipe=$global_symbol_pipe
+-
+-# Transform the output of nm in a proper C declaration
+-global_symbol_to_cdecl=$global_symbol_to_cdecl
+-
+-# This is the shared library runtime path variable.
+-runpath_var=$runpath_var
+-
+-# This is the shared library path variable.
+-shlibpath_var=$shlibpath_var
+-
+-# Is shlibpath searched before the hard-coded library search path?
+-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+-
+-# How to hardcode a shared library path into an executable.
+-hardcode_action=$hardcode_action
+-
+-# Flag to hardcode \$libdir into a binary during linking.
+-# This must work even if \$libdir does not exist.
+-hardcode_libdir_flag_spec=$hardcode_libdir_flag_spec
+-
+-# Whether we need a single -rpath flag with a separated argument.
+-hardcode_libdir_separator=$hardcode_libdir_separator
+-
+-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+-# resulting binary.
+-hardcode_direct=$hardcode_direct
+-
+-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+-# resulting binary.
+-hardcode_minus_L=$hardcode_minus_L
+-
+-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+-# the resulting binary.
+-hardcode_shlibpath_var=$hardcode_shlibpath_var
+-
+-# Compile-time system search path for libraries
+-sys_lib_search_path_spec=$sys_lib_search_path_spec
+-
+-# Run-time system search path for libraries
+-sys_lib_dlsearch_path_spec=$sys_lib_dlsearch_path_spec
+-
+-# Fix the shell variable \$srcfile for the compiler.
+-fix_srcfile_path="$fix_srcfile_path"
+-
+-# Set to yes if exported symbols are required.
+-always_export_symbols=$always_export_symbols
+-
+-# The commands to list exported symbols.
+-export_symbols_cmds=$export_symbols_cmds
+-
+-# Symbols that should not be listed in the preloaded symbols.
+-exclude_expsyms=$exclude_expsyms
+-
+-# Symbols that must always be exported.
+-include_expsyms=$include_expsyms
+-
+-EOF
+-
+-case "$ltmain" in
+-*.sh)
+-  echo '### END LIBTOOL CONFIG' >> "$ofile"
+-  echo >> "$ofile"
+-  case "$host_os" in
+-  aix3*)
+-    cat <<\EOF >> "$ofile"
+-
+-# AIX sometimes has problems with the GCC collect2 program.  For some
+-# reason, if we set the COLLECT_NAMES environment variable, the problems
+-# vanish in a puff of smoke.
+-if test "X${COLLECT_NAMES+set}" != Xset; then
+-  COLLECT_NAMES=
+-  export COLLECT_NAMES
+-fi
+-EOF
+-    ;;
+-  esac
+-
+-  # Append the ltmain.sh script.
+-  sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+-  # We use sed instead of cat because bash on DJGPP gets confused if
+-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+-  # text mode, it properly converts lines to CR/LF.  This bash problem
+-  # is reportedly fixed, but why not run on old versions too?
+-
+-  chmod +x "$ofile"
+-  ;;
+-
+-*)
+-  # Compile the libtool program.
+-  echo "FIXME: would compile $ltmain"
+-  ;;
+-esac
+-
+-test -n "$cache_file" || exit 0
+-
+-# AC_CACHE_SAVE
+-trap '' 1 2 15
+-cat > confcache <<\EOF
+-# This file is a shell script that caches the results of configure
+-# tests run on this system so they can be shared between configure
+-# scripts and configure runs.  It is not useful on other systems.
+-# If it contains results you don't want to keep, you may remove or edit it.
+-#
+-# By default, configure uses ./config.cache as the cache file,
+-# creating it if it does not exist already.  You can give configure
+-# the --cache-file=FILE option to use a different cache file; that is
+-# what configure does when it calls configure scripts in
+-# subdirectories, so they share the cache.
+-# Giving --cache-file=/dev/null disables caching, for debugging configure.
+-# config.status only pays attention to the cache file if you give it the
+-# --recheck option to rerun configure.
+-#
+-EOF
+-# The following way of writing the cache mishandles newlines in values,
+-# but we know of no workaround that is simple, portable, and efficient.
+-# So, don't put newlines in cache variables' values.
+-# Ultrix sh set writes to stderr and can't be redirected directly,
+-# and sets the high bit in the cache file unless we assign to the vars.
+-(set) 2>&1 |
+-  case `(ac_space=' '; set | grep ac_space) 2>&1` in
+-  *ac_space=\ *)
+-    # `set' does not quote correctly, so add quotes (double-quote substitution
+-    # turns \\\\ into \\, and sed turns \\ into \).
+-    sed -n \
+-      -e "s/'/'\\\\''/g" \
+-      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+-    ;;
+-  *)
+-    # `set' quotes correctly as required by POSIX, so do not add quotes.
+-    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+-    ;;
+-  esac >> confcache
+-if cmp -s $cache_file confcache; then
+-  :
+-else
+-  if test -w $cache_file; then
+-    echo "updating cache $cache_file"
+-    cat confcache > $cache_file
+-  else
+-    echo "not updating unwritable cache $cache_file"
+-  fi
+-fi
+-rm -f confcache
+-
+-exit 0
+-
+-# Local Variables:
+-# mode:shell-script
+-# sh-indentation:2
+-# End:
+diff -puriN SDL_gfx-2.0.13.old/ltmain.sh SDL_gfx-2.0.13/ltmain.sh
+--- SDL_gfx-2.0.13.old/ltmain.sh	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/ltmain.sh	2006-01-09 16:21:15.000000000 +0100
+@@ -1,7 +1,8 @@
+ # ltmain.sh - Provide generalized library-building support services.
+-# NOTE: Changing this file will not affect anything until you rerun ltconfig.
++# NOTE: Changing this file will not affect anything until you rerun configure.
+ #
+-# Copyright (C) 1996-1999 Free Software Foundation, Inc.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
++# Free Software Foundation, Inc.
+ # Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+ #
+ # This program is free software; you can redistribute it and/or modify
+@@ -16,13 +17,41 @@
+ #
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ #
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+ 
++basename="s,^.*/,,g"
++
++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
++# is ksh but when the shell is invoked as "sh" and the current value of
++# the _XPG environment variable is not equal to 1 (one), the special
++# positional parameter $0, within a function call, is the name of the
++# function.
++progpath="$0"
++
++# The name of this program:
++progname=`echo "$progpath" | $SED $basename`
++modename="$progname"
++
++# Global variables:
++EXIT_SUCCESS=0
++EXIT_FAILURE=1
++
++PROGRAM=ltmain.sh
++PACKAGE=libtool
++VERSION="1.5.22 Debian 1.5.22-2"
++TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
++
++# See if we are running on zsh, and set the options which allow our
++# commands through without removal of \ escapes.
++if test -n "${ZSH_VERSION+set}" ; then
++  setopt NO_GLOB_SUBST
++fi
++
+ # Check that we have a working $echo.
+ if test "X$1" = X--no-reexec; then
+   # Discard the --no-reexec flag, and continue.
+@@ -35,7 +64,7 @@ elif test "X`($echo '\t') 2>/dev/null`" 
+   :
+ else
+   # Restart under the correct shell, and then maybe $echo will work.
+-  exec $SHELL "$0" --no-reexec ${1+"$@"}
++  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+ fi
+ 
+ if test "X$1" = X--fallback-echo; then
+@@ -44,19 +73,9 @@ if test "X$1" = X--fallback-echo; then
+   cat <<EOF
+ $*
+ EOF
+-  exit 0
++  exit $EXIT_SUCCESS
+ fi
+ 
+-# The name of this program.
+-progname=`$echo "$0" | sed 's%^.*/%%'`
+-modename="$progname"
+-
+-# Constants.
+-PROGRAM=ltmain.sh
+-PACKAGE=libtool
+-VERSION=1.3.5
+-TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+-
+ default_mode=
+ help="Try \`$progname --help' for more information."
+ magic="%%%MAGIC variable%%%"
+@@ -66,10 +85,20 @@ rm="rm -f"
+ 
+ # Sed substitution that helps us do robust quoting.  It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
++Xsed="${SED}"' -e 1s/^X//'
+ sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+-SP2NL='tr \040 \012'
+-NL2SP='tr \015\012 \040\040'
++# test EBCDIC or ASCII
++case `echo X|tr X '\101'` in
++ A) # ASCII based system
++    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
++  SP2NL='tr \040 \012'
++  NL2SP='tr \015\012 \040\040'
++  ;;
++ *) # EBCDIC based system
++  SP2NL='tr \100 \n'
++  NL2SP='tr \r\n \100\100'
++  ;;
++esac
+ 
+ # NLS nuisances.
+ # Only set LANG and LC_ALL to C if already set.
+@@ -83,16 +112,15 @@ if test "${LANG+set}" = set; then
+   save_LANG="$LANG"; LANG=C; export LANG
+ fi
+ 
+-if test "$LTCONFIG_VERSION" != "$VERSION"; then
+-  echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2
+-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-  exit 1
+-fi
++# Make sure IFS has a sensible default
++lt_nl='
++'
++IFS=" 	$lt_nl"
+ 
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+-  echo "$modename: not configured to build any kind of library" 1>&2
+-  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-  exit 1
++  $echo "$modename: not configured to build any kind of library" 1>&2
++  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
++  exit $EXIT_FAILURE
+ fi
+ 
+ # Global variables.
+@@ -104,25 +132,310 @@ run=
+ show="$echo"
+ show_help=
+ execute_dlfiles=
++duplicate_deps=no
++preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
+ 
++#####################################
++# Shell function definitions:
++# This seems to be the best place for them
++
++# func_mktempdir [string]
++# Make a temporary directory that won't clash with other running
++# libtool processes, and avoids race conditions if possible.  If
++# given, STRING is the basename for that directory.
++func_mktempdir ()
++{
++    my_template="${TMPDIR-/tmp}/${1-$progname}"
++
++    if test "$run" = ":"; then
++      # Return a directory name, but don't create it in dry-run mode
++      my_tmpdir="${my_template}-$$"
++    else
++
++      # If mktemp works, use that first and foremost
++      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
++
++      if test ! -d "$my_tmpdir"; then
++	# Failing that, at least try and use $RANDOM to avoid a race
++	my_tmpdir="${my_template}-${RANDOM-0}$$"
++
++	save_mktempdir_umask=`umask`
++	umask 0077
++	$mkdir "$my_tmpdir"
++	umask $save_mktempdir_umask
++      fi
++
++      # If we're not in dry-run mode, bomb out on failure
++      test -d "$my_tmpdir" || {
++        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
++	exit $EXIT_FAILURE
++      }
++    fi
++
++    $echo "X$my_tmpdir" | $Xsed
++}
++
++
++# func_win32_libid arg
++# return the library type of file 'arg'
++#
++# Need a lot of goo to handle *both* DLLs and import libs
++# Has to be a shell function in order to 'eat' the argument
++# that is supplied when $file_magic_command is called.
++func_win32_libid ()
++{
++  win32_libid_type="unknown"
++  win32_fileres=`file -L $1 2>/dev/null`
++  case $win32_fileres in
++  *ar\ archive\ import\ library*) # definitely import
++    win32_libid_type="x86 archive import"
++    ;;
++  *ar\ archive*) # could be an import, or static
++    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
++      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
++      win32_nmres=`eval $NM -f posix -A $1 | \
++	$SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'`
++      case $win32_nmres in
++      import*)  win32_libid_type="x86 archive import";;
++      *)        win32_libid_type="x86 archive static";;
++      esac
++    fi
++    ;;
++  *DLL*)
++    win32_libid_type="x86 DLL"
++    ;;
++  *executable*) # but shell scripts are "executable" too...
++    case $win32_fileres in
++    *MS\ Windows\ PE\ Intel*)
++      win32_libid_type="x86 DLL"
++      ;;
++    esac
++    ;;
++  esac
++  $echo $win32_libid_type
++}
++
++
++# func_infer_tag arg
++# Infer tagged configuration to use if any are available and
++# if one wasn't chosen via the "--tag" command line option.
++# Only attempt this if the compiler in the base compile
++# command doesn't match the default compiler.
++# arg is usually of the form 'gcc ...'
++func_infer_tag ()
++{
++    if test -n "$available_tags" && test -z "$tagname"; then
++      CC_quoted=
++      for arg in $CC; do
++	case $arg in
++	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	  arg="\"$arg\""
++	  ;;
++	esac
++	CC_quoted="$CC_quoted $arg"
++      done
++      case $@ in
++      # Blanks in the command may have been stripped by the calling shell,
++      # but not from the CC environment variable when configure was run.
++      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
++      # Blanks at the start of $base_compile will cause this to fail
++      # if we don't check for them as well.
++      *)
++	for z in $available_tags; do
++	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
++	    # Evaluate the configuration.
++	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
++	    CC_quoted=
++	    for arg in $CC; do
++	    # Double-quote args containing other shell metacharacters.
++	    case $arg in
++	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	      arg="\"$arg\""
++	      ;;
++	    esac
++	    CC_quoted="$CC_quoted $arg"
++	  done
++	    case "$@ " in
++	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
++	      # The compiler in the base compile command matches
++	      # the one in the tagged configuration.
++	      # Assume this is the tagged configuration we want.
++	      tagname=$z
++	      break
++	      ;;
++	    esac
++	  fi
++	done
++	# If $tagname still isn't set, then no tagged configuration
++	# was found and let the user know that the "--tag" command
++	# line option must be used.
++	if test -z "$tagname"; then
++	  $echo "$modename: unable to infer tagged configuration"
++	  $echo "$modename: specify a tag with \`--tag'" 1>&2
++	  exit $EXIT_FAILURE
++#        else
++#          $echo "$modename: using $tagname tagged configuration"
++	fi
++	;;
++      esac
++    fi
++}
++
++
++# func_extract_an_archive dir oldlib
++func_extract_an_archive ()
++{
++    f_ex_an_ar_dir="$1"; shift
++    f_ex_an_ar_oldlib="$1"
++
++    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
++    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
++    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
++     :
++    else
++      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
++      exit $EXIT_FAILURE
++    fi
++}
++
++# func_extract_archives gentop oldlib ...
++func_extract_archives ()
++{
++    my_gentop="$1"; shift
++    my_oldlibs=${1+"$@"}
++    my_oldobjs=""
++    my_xlib=""
++    my_xabs=""
++    my_xdir=""
++    my_status=""
++
++    $show "${rm}r $my_gentop"
++    $run ${rm}r "$my_gentop"
++    $show "$mkdir $my_gentop"
++    $run $mkdir "$my_gentop"
++    my_status=$?
++    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
++      exit $my_status
++    fi
++
++    for my_xlib in $my_oldlibs; do
++      # Extract the objects.
++      case $my_xlib in
++	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
++	*) my_xabs=`pwd`"/$my_xlib" ;;
++      esac
++      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
++      my_xdir="$my_gentop/$my_xlib"
++
++      $show "${rm}r $my_xdir"
++      $run ${rm}r "$my_xdir"
++      $show "$mkdir $my_xdir"
++      $run $mkdir "$my_xdir"
++      exit_status=$?
++      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
++	exit $exit_status
++      fi
++      case $host in
++      *-darwin*)
++	$show "Extracting $my_xabs"
++	# Do not bother doing anything if just a dry run
++	if test -z "$run"; then
++	  darwin_orig_dir=`pwd`
++	  cd $my_xdir || exit $?
++	  darwin_archive=$my_xabs
++	  darwin_curdir=`pwd`
++	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
++	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
++	  if test -n "$darwin_arches"; then 
++	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
++	    darwin_arch=
++	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
++	    for darwin_arch in  $darwin_arches ; do
++	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
++	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
++	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
++	      cd "$darwin_curdir"
++	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
++	    done # $darwin_arches
++      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
++	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
++	    darwin_file=
++	    darwin_files=
++	    for darwin_file in $darwin_filelist; do
++	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
++	      lipo -create -output "$darwin_file" $darwin_files
++	    done # $darwin_filelist
++	    ${rm}r unfat-$$
++	    cd "$darwin_orig_dir"
++	  else
++	    cd "$darwin_orig_dir"
++ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
++	  fi # $darwin_arches
++	fi # $run
++	;;
++      *)
++        func_extract_an_archive "$my_xdir" "$my_xabs"
++        ;;
++      esac
++      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
++    done
++    func_extract_archives_result="$my_oldobjs"
++}
++# End of Shell function definitions
++#####################################
++
++# Darwin sucks
++eval std_shrext=\"$shrext_cmds\"
++
++disable_libs=no
++
+ # Parse our command line options once, thoroughly.
+-while test $# -gt 0
++while test "$#" -gt 0
+ do
+   arg="$1"
+   shift
+ 
+-  case "$arg" in
++  case $arg in
+   -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+   *) optarg= ;;
+   esac
+ 
+   # If the previous option needs an argument, assign it.
+   if test -n "$prev"; then
+-    case "$prev" in
++    case $prev in
+     execute_dlfiles)
+-      eval "$prev=\"\$$prev \$arg\""
++      execute_dlfiles="$execute_dlfiles $arg"
++      ;;
++    tag)
++      tagname="$arg"
++      preserve_args="${preserve_args}=$arg"
++
++      # Check whether tagname contains only valid characters
++      case $tagname in
++      *[!-_A-Za-z0-9,/]*)
++	$echo "$progname: invalid tag name: $tagname" 1>&2
++	exit $EXIT_FAILURE
++	;;
++      esac
++
++      case $tagname in
++      CC)
++	# Don't test for the "default" C tag, as we know, it's there, but
++	# not specially marked.
++	;;
++      *)
++	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
++	  taglist="$taglist $tagname"
++	  # Evaluate the configuration.
++	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
++	else
++	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
++	fi
++	;;
++      esac
+       ;;
+     *)
+       eval "$prev=\$arg"
+@@ -135,24 +448,33 @@ do
+   fi
+ 
+   # Have we seen a non-optional argument yet?
+-  case "$arg" in
++  case $arg in
+   --help)
+     show_help=yes
+     ;;
+ 
+   --version)
+-    echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
+-    exit 0
++    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
++    $echo
++    $echo "Copyright (C) 2005  Free Software Foundation, Inc."
++    $echo "This is free software; see the source for copying conditions.  There is NO"
++    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++    exit $?
+     ;;
+ 
+   --config)
+-    sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0
+-    exit 0
++    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
++    # Now print the configurations for the tags.
++    for tagname in $taglist; do
++      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
++    done
++    exit $?
+     ;;
+ 
+   --debug)
+-    echo "$progname: enabling shell trace mode"
++    $echo "$progname: enabling shell trace mode"
+     set -x
++    preserve_args="$preserve_args $arg"
+     ;;
+ 
+   --dry-run | -n)
+@@ -160,18 +482,18 @@ do
+     ;;
+ 
+   --features)
+-    echo "host: $host"
++    $echo "host: $host"
+     if test "$build_libtool_libs" = yes; then
+-      echo "enable shared libraries"
++      $echo "enable shared libraries"
+     else
+-      echo "disable shared libraries"
++      $echo "disable shared libraries"
+     fi
+     if test "$build_old_libs" = yes; then
+-      echo "enable static libraries"
++      $echo "enable static libraries"
+     else
+-      echo "disable static libraries"
++      $echo "disable static libraries"
+     fi
+-    exit 0
++    exit $?
+     ;;
+ 
+   --finish) mode="finish" ;;
+@@ -179,8 +501,23 @@ do
+   --mode) prevopt="--mode" prev=mode ;;
+   --mode=*) mode="$optarg" ;;
+ 
++  --preserve-dup-deps) duplicate_deps="yes" ;;
++
+   --quiet | --silent)
+     show=:
++    preserve_args="$preserve_args $arg"
++    ;;
++
++  --tag)
++    prevopt="--tag"
++    prev=tag
++    preserve_args="$preserve_args --tag"
++    ;;
++  --tag=*)
++    set tag "$optarg" ${1+"$@"}
++    shift
++    prev=tag
++    preserve_args="$preserve_args --tag"
+     ;;
+ 
+   -dlopen)
+@@ -191,7 +528,7 @@ do
+   -*)
+     $echo "$modename: unrecognized option \`$arg'" 1>&2
+     $echo "$help" 1>&2
+-    exit 1
++    exit $EXIT_FAILURE
+     ;;
+ 
+   *)
+@@ -204,19 +541,38 @@ done
+ if test -n "$prevopt"; then
+   $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+   $echo "$help" 1>&2
+-  exit 1
++  exit $EXIT_FAILURE
+ fi
+ 
++case $disable_libs in
++no) 
++  ;;
++shared)
++  build_libtool_libs=no
++  build_old_libs=yes
++  ;;
++static)
++  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
++  ;;
++esac
++
++# If this variable is set in any of the actions, the command in it
++# will be execed at the end.  This prevents here-documents from being
++# left over by shells.
++exec_cmd=
++
+ if test -z "$show_help"; then
+ 
+   # Infer the operation mode.
+   if test -z "$mode"; then
+-    case "$nonopt" in
+-    *cc | *++ | gcc* | *-gcc*)
++    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
++    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
++    case $nonopt in
++    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+       mode=link
+       for arg
+       do
+-	case "$arg" in
++	case $arg in
+ 	-c)
+ 	   mode=compile
+ 	   break
+@@ -253,7 +609,7 @@ if test -z "$show_help"; then
+   if test -n "$execute_dlfiles" && test "$mode" != execute; then
+     $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+     $echo "$help" 1>&2
+-    exit 1
++    exit $EXIT_FAILURE
+   fi
+ 
+   # Change the help message to a mode-specific one.
+@@ -261,140 +617,233 @@ if test -z "$show_help"; then
+   help="Try \`$modename --help --mode=$mode' for more information."
+ 
+   # These modes are in order of execution frequency so that they run quickly.
+-  case "$mode" in
++  case $mode in
+   # libtool compile mode
+   compile)
+     modename="$modename: compile"
+     # Get the compilation command and the source file.
+     base_compile=
+-    lastarg=
+-    srcfile="$nonopt"
++    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
++    suppress_opt=yes
+     suppress_output=
++    arg_mode=normal
++    libobj=
++    later=
+ 
+-    user_target=no
+     for arg
+     do
+-      # Accept any command-line options.
+-      case "$arg" in
+-      -o)
+-	if test "$user_target" != "no"; then
+-	  $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+-	  exit 1
+-	fi
+-	user_target=next
+-	;;
+-
+-      -static)
+-	build_old_libs=yes
+-	continue
++      case $arg_mode in
++      arg  )
++	# do not "continue".  Instead, add this to base_compile
++	lastarg="$arg"
++	arg_mode=normal
+ 	;;
+-      esac
+ 
+-      case "$user_target" in
+-      next)
+-	# The next one is the -o target name
+-	user_target=yes
+-	continue
+-	;;
+-      yes)
+-	# We got the output file
+-	user_target=set
++      target )
+ 	libobj="$arg"
++	arg_mode=normal
+ 	continue
+ 	;;
+-      esac
+ 
+-      # Accept the current argument as the source file.
+-      lastarg="$srcfile"
+-      srcfile="$arg"
++      normal )
++	# Accept any command-line options.
++	case $arg in
++	-o)
++	  if test -n "$libobj" ; then
++	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++	  arg_mode=target
++	  continue
++	  ;;
+ 
+-      # Aesthetically quote the previous argument.
++	-static | -prefer-pic | -prefer-non-pic)
++	  later="$later $arg"
++	  continue
++	  ;;
+ 
+-      # Backslashify any backslashes, double quotes, and dollar signs.
+-      # These are the only characters that are still specially
+-      # interpreted inside of double-quoted scrings.
++	-no-suppress)
++	  suppress_opt=no
++	  continue
++	  ;;
++
++	-Xcompiler)
++	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
++	  continue      #  The current "srcfile" will either be retained or
++	  ;;            #  replaced later.  I would guess that would be a bug.
++
++	-Wc,*)
++	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
++	  lastarg=
++	  save_ifs="$IFS"; IFS=','
++ 	  for arg in $args; do
++	    IFS="$save_ifs"
++
++	    # Double-quote args containing other shell metacharacters.
++	    # Many Bourne shells cannot handle close brackets correctly
++	    # in scan sets, so we specify it separately.
++	    case $arg in
++	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	      arg="\"$arg\""
++	      ;;
++	    esac
++	    lastarg="$lastarg $arg"
++	  done
++	  IFS="$save_ifs"
++	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
++
++	  # Add the arguments to base_compile.
++	  base_compile="$base_compile $lastarg"
++	  continue
++	  ;;
++
++	* )
++	  # Accept the current argument as the source file.
++	  # The previous "srcfile" becomes the current argument.
++	  #
++	  lastarg="$srcfile"
++	  srcfile="$arg"
++	  ;;
++	esac  #  case $arg
++	;;
++      esac    #  case $arg_mode
++
++      # Aesthetically quote the previous argument.
+       lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+ 
++      case $lastarg in
+       # Double-quote args containing other shell metacharacters.
+-      # Many Bourne shells cannot handle close brackets correctly in scan
+-      # sets, so we specify it separately.
+-      case "$lastarg" in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
++      # Many Bourne shells cannot handle close brackets correctly
++      # in scan sets, and some SunOS ksh mistreat backslash-escaping
++      # in scan sets (worked around with variable expansion),
++      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
++      # at all, so we specify them separately.
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+ 	lastarg="\"$lastarg\""
+ 	;;
+       esac
+ 
+-      # Add the previous argument to base_compile.
+-      if test -z "$base_compile"; then
+-	base_compile="$lastarg"
+-      else
+-	base_compile="$base_compile $lastarg"
+-      fi
+-    done
++      base_compile="$base_compile $lastarg"
++    done # for arg
+ 
+-    case "$user_target" in
+-    set)
++    case $arg_mode in
++    arg)
++      $echo "$modename: you must specify an argument for -Xcompile"
++      exit $EXIT_FAILURE
+       ;;
+-    no)
+-      # Get the name of the library object.
+-      libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
++    target)
++      $echo "$modename: you must specify a target with \`-o'" 1>&2
++      exit $EXIT_FAILURE
+       ;;
+     *)
+-      $echo "$modename: you must specify a target with \`-o'" 1>&2
+-      exit 1
++      # Get the name of the library object.
++      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+       ;;
+     esac
+ 
+     # Recognize several different file suffixes.
+     # If the user specifies -o file.o, it is replaced with file.lo
+-    xform='[cCFSfmso]'
+-    case "$libobj" in
++    xform='[cCFSifmso]'
++    case $libobj in
+     *.ada) xform=ada ;;
+     *.adb) xform=adb ;;
+     *.ads) xform=ads ;;
+     *.asm) xform=asm ;;
+     *.c++) xform=c++ ;;
+     *.cc) xform=cc ;;
++    *.ii) xform=ii ;;
++    *.class) xform=class ;;
+     *.cpp) xform=cpp ;;
+     *.cxx) xform=cxx ;;
+     *.f90) xform=f90 ;;
+     *.for) xform=for ;;
++    *.java) xform=java ;;
+     esac
+ 
+     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+ 
+-    case "$libobj" in
++    case $libobj in
+     *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+     *)
+       $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+-      exit 1
++      exit $EXIT_FAILURE
+       ;;
+     esac
+ 
++    func_infer_tag $base_compile
++
++    for arg in $later; do
++      case $arg in
++      -static)
++	build_old_libs=yes
++	continue
++	;;
++
++      -prefer-pic)
++	pic_mode=yes
++	continue
++	;;
++
++      -prefer-non-pic)
++	pic_mode=no
++	continue
++	;;
++      esac
++    done
++
++    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
++    case $qlibobj in
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	qlibobj="\"$qlibobj\"" ;;
++    esac
++    test "X$libobj" != "X$qlibobj" \
++	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
++	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
++    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
++    if test "X$xdir" = "X$obj"; then
++      xdir=
++    else
++      xdir=$xdir/
++    fi
++    lobj=${xdir}$objdir/$objname
++
+     if test -z "$base_compile"; then
+       $echo "$modename: you must specify a compilation command" 1>&2
+       $echo "$help" 1>&2
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+ 
+     # Delete any leftover library objects.
+     if test "$build_old_libs" = yes; then
+-      removelist="$obj $libobj"
++      removelist="$obj $lobj $libobj ${libobj}T"
+     else
+-      removelist="$libobj"
++      removelist="$lobj $libobj ${libobj}T"
+     fi
+ 
+     $run $rm $removelist
+-    trap "$run $rm $removelist; exit 1" 1 2 15
++    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
++
++    # On Cygwin there's no "real" PIC flag so we must build both object types
++    case $host_os in
++    cygwin* | mingw* | pw32* | os2*)
++      pic_mode=default
++      ;;
++    esac
++    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
++      # non-PIC code in shared libraries is not supported
++      pic_mode=default
++    fi
+ 
+     # Calculate the filename of the output object if compiler does
+     # not support -o with -c
+     if test "$compiler_c_o" = no; then
+-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext}
++      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+       lockfile="$output_obj.lock"
+       removelist="$removelist $output_obj $lockfile"
+-      trap "$run $rm $removelist; exit 1" 1 2 15
++      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+     else
++      output_obj=
+       need_locks=no
+       lockfile=
+     fi
+@@ -402,13 +851,13 @@ if test -z "$show_help"; then
+     # Lock this critical section if it is needed
+     # We use this script file to make the link, it avoids creating a new file
+     if test "$need_locks" = yes; then
+-      until ln "$0" "$lockfile" 2>/dev/null; do
++      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
+ 	$show "Waiting for $lockfile to be removed"
+ 	sleep 2
+       done
+     elif test "$need_locks" = warn; then
+       if test -f "$lockfile"; then
+-	echo "\
++	$echo "\
+ *** ERROR, $lockfile exists and contains:
+ `cat $lockfile 2>/dev/null`
+ 
+@@ -420,63 +869,72 @@ avoid parallel builds (make -j) in this 
+ compiler."
+ 
+ 	$run $rm $removelist
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+-      echo $srcfile > "$lockfile"
++      $echo "$srcfile" > "$lockfile"
+     fi
+ 
+     if test -n "$fix_srcfile_path"; then
+       eval srcfile=\"$fix_srcfile_path\"
+     fi
++    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
++    case $qsrcfile in
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++      qsrcfile="\"$qsrcfile\"" ;;
++    esac
++
++    $run $rm "$libobj" "${libobj}T"
++
++    # Create a libtool object file (analogous to a ".la" file),
++    # but don't create it if we're doing a dry run.
++    test -z "$run" && cat > ${libobj}T <<EOF
++# $libobj - a libtool object file
++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# Name of the PIC object.
++EOF
+ 
+     # Only build a PIC object if we are building libtool libraries.
+     if test "$build_libtool_libs" = yes; then
+       # Without this assignment, base_compile gets emptied.
+       fbsd_hideous_sh_bug=$base_compile
+ 
+-      # All platforms use -DPIC, to notify preprocessed assembler code.
+-      command="$base_compile $srcfile $pic_flag -DPIC"
+-      if test "$build_old_libs" = yes; then
+-	lo_libobj="$libobj"
+-	dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+-	if test "X$dir" = "X$libobj"; then
+-	  dir="$objdir"
+-	else
+-	  dir="$dir/$objdir"
+-	fi
+-	libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
++      if test "$pic_mode" != no; then
++	command="$base_compile $qsrcfile $pic_flag"
++      else
++	# Don't build PIC code
++	command="$base_compile $qsrcfile"
++      fi
+ 
+-	if test -d "$dir"; then
+-	  $show "$rm $libobj"
+-	  $run $rm $libobj
+-	else
+-	  $show "$mkdir $dir"
+-	  $run $mkdir $dir
+-	  status=$?
+-	  if test $status -ne 0 && test ! -d $dir; then
+-	    exit $status
+-	  fi
++      if test ! -d "${xdir}$objdir"; then
++	$show "$mkdir ${xdir}$objdir"
++	$run $mkdir ${xdir}$objdir
++	exit_status=$?
++	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
++	  exit $exit_status
+ 	fi
+       fi
+-      if test "$compiler_o_lo" = yes; then
+-	output_obj="$libobj"
+-	command="$command -o $output_obj"
+-      elif test "$compiler_c_o" = yes; then
+-	output_obj="$obj"
+-	command="$command -o $output_obj"
++
++      if test -z "$output_obj"; then
++	# Place PIC objects in $objdir
++	command="$command -o $lobj"
+       fi
+ 
+-      $run $rm "$output_obj"
++      $run $rm "$lobj" "$output_obj"
++
+       $show "$command"
+       if $run eval "$command"; then :
+       else
+ 	test -n "$output_obj" && $run $rm $removelist
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+ 
+       if test "$need_locks" = warn &&
+-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+-	echo "\
++	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++	$echo "\
+ *** ERROR, $lockfile contains:
+ `cat $lockfile 2>/dev/null`
+ 
+@@ -491,13 +949,13 @@ avoid parallel builds (make -j) in this 
+ compiler."
+ 
+ 	$run $rm $removelist
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+ 
+       # Just move the object if needed, then go on to compile the next one
+-      if test x"$output_obj" != x"$libobj"; then
+-	$show "$mv $output_obj $libobj"
+-	if $run $mv $output_obj $libobj; then :
++      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
++	$show "$mv $output_obj $lobj"
++	if $run $mv $output_obj $lobj; then :
+ 	else
+ 	  error=$?
+ 	  $run $rm $removelist
+@@ -505,66 +963,50 @@ compiler."
+ 	fi
+       fi
+ 
+-      # If we have no pic_flag, then copy the object into place and finish.
+-      if test -z "$pic_flag" && test "$build_old_libs" = yes; then
+-	# Rename the .lo from within objdir to obj
+-	if test -f $obj; then
+-	  $show $rm $obj
+-	  $run $rm $obj
+-	fi
++      # Append the name of the PIC object to the libtool object file.
++      test -z "$run" && cat >> ${libobj}T <<EOF
++pic_object='$objdir/$objname'
+ 
+-	$show "$mv $libobj $obj"
+-	if $run $mv $libobj $obj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
++EOF
+ 
+-	xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+-	if test "X$xdir" = "X$obj"; then
+-	  xdir="."
+-	else
+-	  xdir="$xdir"
+-	fi
+-	baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
+-	libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+-	# Now arrange that obj and lo_libobj become the same file
+-	$show "(cd $xdir && $LN_S $baseobj $libobj)"
+-	if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+-	  exit 0
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
++      # Allow error messages only from the first compilation.
++      if test "$suppress_opt" = yes; then
++        suppress_output=' >/dev/null 2>&1'
+       fi
++    else
++      # No PIC object so indicate it doesn't exist in the libtool
++      # object file.
++      test -z "$run" && cat >> ${libobj}T <<EOF
++pic_object=none
+ 
+-      # Allow error messages only from the first compilation.
+-      suppress_output=' >/dev/null 2>&1'
++EOF
+     fi
+ 
+     # Only build a position-dependent object if we build old libraries.
+     if test "$build_old_libs" = yes; then
+-      command="$base_compile $srcfile"
++      if test "$pic_mode" != yes; then
++	# Don't build PIC code
++	command="$base_compile $qsrcfile"
++      else
++	command="$base_compile $qsrcfile $pic_flag"
++      fi
+       if test "$compiler_c_o" = yes; then
+ 	command="$command -o $obj"
+-	output_obj="$obj"
+       fi
+ 
+       # Suppress compiler output if we already did a PIC compilation.
+       command="$command$suppress_output"
+-      $run $rm "$output_obj"
++      $run $rm "$obj" "$output_obj"
+       $show "$command"
+       if $run eval "$command"; then :
+       else
+ 	$run $rm $removelist
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+ 
+       if test "$need_locks" = warn &&
+-	 test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
+-	echo "\
++	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
++	$echo "\
+ *** ERROR, $lockfile contains:
+ `cat $lockfile 2>/dev/null`
+ 
+@@ -579,11 +1021,11 @@ avoid parallel builds (make -j) in this 
+ compiler."
+ 
+ 	$run $rm $removelist
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+ 
+       # Just move the object if needed
+-      if test x"$output_obj" != x"$obj"; then
++      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ 	$show "$mv $output_obj $obj"
+ 	if $run $mv $output_obj $obj; then :
+ 	else
+@@ -593,40 +1035,42 @@ compiler."
+ 	fi
+       fi
+ 
+-      # Create an invalid libtool object if no PIC, so that we do not
+-      # accidentally link it into a program.
+-      if test "$build_libtool_libs" != yes; then
+-	$show "echo timestamp > $libobj"
+-	$run eval "echo timestamp > \$libobj" || exit $?
+-      else
+-	# Move the .lo from within objdir
+-	$show "$mv $libobj $lo_libobj"
+-	if $run $mv $libobj $lo_libobj; then :
+-	else
+-	  error=$?
+-	  $run $rm $removelist
+-	  exit $error
+-	fi
+-      fi
++      # Append the name of the non-PIC object the libtool object file.
++      # Only append if the libtool object file exists.
++      test -z "$run" && cat >> ${libobj}T <<EOF
++# Name of the non-PIC object.
++non_pic_object='$objname'
++
++EOF
++    else
++      # Append the name of the non-PIC object the libtool object file.
++      # Only append if the libtool object file exists.
++      test -z "$run" && cat >> ${libobj}T <<EOF
++# Name of the non-PIC object.
++non_pic_object=none
++
++EOF
+     fi
+ 
++    $run $mv "${libobj}T" "${libobj}"
++
+     # Unlock the critical section if it was locked
+     if test "$need_locks" != no; then
+-      $rm "$lockfile"
++      $run $rm "$lockfile"
+     fi
+ 
+-    exit 0
++    exit $EXIT_SUCCESS
+     ;;
+ 
+   # libtool link mode
+-  link)
++  link | relink)
+     modename="$modename: link"
+-    case "$host" in
+-    *-*-cygwin* | *-*-mingw* | *-*-os2*)
++    case $host in
++    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+       # It is impossible to link a dll without this setting, and
+       # we shouldn't force the makefile maintainer to figure out
+       # which system we are compiling for in order to pass an extra
+-      # flag for every libtool invokation.
++      # flag for every libtool invocation.
+       # allow_undefined=no
+ 
+       # FIXME: Unfortunately, there are problems with the above when trying
+@@ -635,179 +1079,13 @@ compiler."
+       # -no-undefined on the libtool link line when we can be certain
+       # that all symbols are satisfied, otherwise we get a static library.
+       allow_undefined=yes
+-
+-      # This is a source program that is used to create dlls on Windows
+-      # Don't remove nor modify the starting and closing comments
+-# /* ltdll.c starts here */
+-# #define WIN32_LEAN_AND_MEAN
+-# #include <windows.h>
+-# #undef WIN32_LEAN_AND_MEAN
+-# #include <stdio.h>
+-#
+-# #ifndef __CYGWIN__
+-# #  ifdef __CYGWIN32__
+-# #    define __CYGWIN__ __CYGWIN32__
+-# #  endif
+-# #endif
+-#
+-# #ifdef __cplusplus
+-# extern "C" {
+-# #endif
+-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+-# #ifdef __cplusplus
+-# }
+-# #endif
+-#
+-# #ifdef __CYGWIN__
+-# #include <cygwin/cygwin_dll.h>
+-# DECLARE_CYGWIN_DLL( DllMain );
+-# #endif
+-# HINSTANCE __hDllInstance_base;
+-#
+-# BOOL APIENTRY
+-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+-# {
+-#   __hDllInstance_base = hInst;
+-#   return TRUE;
+-# }
+-# /* ltdll.c ends here */
+-      # This is a source program that is used to create import libraries
+-      # on Windows for dlls which lack them. Don't remove nor modify the
+-      # starting and closing comments
+-# /* impgen.c starts here */
+-# /*   Copyright (C) 1999 Free Software Foundation, Inc.
+-# 
+-#  This file is part of GNU libtool.
+-# 
+-#  This program is free software; you can redistribute it and/or modify
+-#  it under the terms of the GNU General Public License as published by
+-#  the Free Software Foundation; either version 2 of the License, or
+-#  (at your option) any later version.
+-# 
+-#  This program is distributed in the hope that it will be useful,
+-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+-#  GNU General Public License for more details.
+-# 
+-#  You should have received a copy of the GNU General Public License
+-#  along with this program; if not, write to the Free Software
+-#  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+-#  */
+-# 
+-#  #include <stdio.h>		/* for printf() */
+-#  #include <unistd.h>		/* for open(), lseek(), read() */
+-#  #include <fcntl.h>		/* for O_RDONLY, O_BINARY */
+-#  #include <string.h>		/* for strdup() */
+-# 
+-#  static unsigned int
+-#  pe_get16 (fd, offset)
+-#       int fd;
+-#       int offset;
+-#  {
+-#    unsigned char b[2];
+-#    lseek (fd, offset, SEEK_SET);
+-#    read (fd, b, 2);
+-#    return b[0] + (b[1]<<8);
+-#  }
+-# 
+-#  static unsigned int
+-#  pe_get32 (fd, offset)
+-#      int fd;
+-#      int offset;
+-#  {
+-#    unsigned char b[4];
+-#    lseek (fd, offset, SEEK_SET);
+-#    read (fd, b, 4);
+-#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+-#  }
+-# 
+-#  static unsigned int
+-#  pe_as32 (ptr)
+-#       void *ptr;
+-#  {
+-#    unsigned char *b = ptr;
+-#    return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24);
+-#  }
+-# 
+-#  int
+-#  main (argc, argv)
+-#      int argc;
+-#      char *argv[];
+-#  {
+-#      int dll;
+-#      unsigned long pe_header_offset, opthdr_ofs, num_entries, i;
+-#      unsigned long export_rva, export_size, nsections, secptr, expptr;
+-#      unsigned long name_rvas, nexp;
+-#      unsigned char *expdata, *erva;
+-#      char *filename, *dll_name;
+-# 
+-#      filename = argv[1];
+-# 
+-#      dll = open(filename, O_RDONLY|O_BINARY);
+-#      if (!dll)
+-#  	return 1;
+-# 
+-#      dll_name = filename;
+-#    
+-#      for (i=0; filename[i]; i++)
+-#  	if (filename[i] == '/' || filename[i] == '\\'  || filename[i] == ':')
+-#  	    dll_name = filename + i +1;
+-# 
+-#      pe_header_offset = pe_get32 (dll, 0x3c);
+-#      opthdr_ofs = pe_header_offset + 4 + 20;
+-#      num_entries = pe_get32 (dll, opthdr_ofs + 92);
+-# 
+-#      if (num_entries < 1) /* no exports */
+-#  	return 1;
+-# 
+-#      export_rva = pe_get32 (dll, opthdr_ofs + 96);
+-#      export_size = pe_get32 (dll, opthdr_ofs + 100);
+-#      nsections = pe_get16 (dll, pe_header_offset + 4 +2);
+-#      secptr = (pe_header_offset + 4 + 20 +
+-#  	      pe_get16 (dll, pe_header_offset + 4 + 16));
+-# 
+-#      expptr = 0;
+-#      for (i = 0; i < nsections; i++)
+-#      {
+-#  	char sname[8];
+-#  	unsigned long secptr1 = secptr + 40 * i;
+-#  	unsigned long vaddr = pe_get32 (dll, secptr1 + 12);
+-#  	unsigned long vsize = pe_get32 (dll, secptr1 + 16);
+-#  	unsigned long fptr = pe_get32 (dll, secptr1 + 20);
+-#  	lseek(dll, secptr1, SEEK_SET);
+-#  	read(dll, sname, 8);
+-#  	if (vaddr <= export_rva && vaddr+vsize > export_rva)
+-#  	{
+-#  	    expptr = fptr + (export_rva - vaddr);
+-#  	    if (export_rva + export_size > vaddr + vsize)
+-#  		export_size = vsize - (export_rva - vaddr);
+-#  	    break;
+-#  	}
+-#      }
+-# 
+-#      expdata = (unsigned char*)malloc(export_size);
+-#      lseek (dll, expptr, SEEK_SET);
+-#      read (dll, expdata, export_size);
+-#      erva = expdata - export_rva;
+-# 
+-#      nexp = pe_as32 (expdata+24);
+-#      name_rvas = pe_as32 (expdata+32);
+-# 
+-#      printf ("EXPORTS\n");
+-#      for (i = 0; i<nexp; i++)
+-#      {
+-#  	unsigned long name_rva = pe_as32 (erva+name_rvas+i*4);
+-#  	printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i);
+-#      }
+-# 
+-#      return 0;
+-#  }
+-# /* impgen.c ends here */
+       ;;
+     *)
+       allow_undefined=yes
+       ;;
+     esac
++    libtool_args="$nonopt"
++    base_compile="$nonopt $@"
+     compile_command="$nonopt"
+     finalize_command="$nonopt"
+ 
+@@ -818,18 +1096,13 @@ compiler."
+     convenience=
+     old_convenience=
+     deplibs=
+-    linkopts=
++    old_deplibs=
++    compiler_flags=
++    linker_flags=
++    dllsearchpath=
++    lib_search_path=`pwd`
++    inst_prefix_dir=
+ 
+-    if test -n "$shlibpath_var"; then
+-      # get the directories listed in $shlibpath_var
+-      eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+-    else
+-      lib_search_path=
+-    fi
+-    # now prepend the system-specific ones
+-    eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\"
+-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+-    
+     avoid_version=no
+     dlfiles=
+     dlprefiles=
+@@ -839,10 +1112,13 @@ compiler."
+     export_symbols_regex=
+     generated=
+     libobjs=
+-    link_against_libtool_libs=
+     ltlibs=
+     module=no
++    no_install=no
+     objs=
++    non_pic_objects=
++    notinst_path= # paths that contain not-installed libtool libraries
++    precious_files_regex=
+     prefer_static_libs=no
+     preload=no
+     prev=
+@@ -854,11 +1130,14 @@ compiler."
+     temp_rpath=
+     thread_safe=no
+     vinfo=
++    vinfo_number=no
++
++    func_infer_tag $base_compile
+ 
+     # We need to know -static, to get the right output filenames.
+     for arg
+     do
+-      case "$arg" in
++      case $arg in
+       -all-static | -static)
+ 	if test "X$arg" = "X-all-static"; then
+ 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+@@ -867,14 +1146,15 @@ compiler."
+ 	  if test -n "$link_static_flag"; then
+ 	    dlopen_self=$dlopen_self_static
+ 	  fi
++	  prefer_static_libs=yes
+ 	else
+ 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ 	    dlopen_self=$dlopen_self_static
+ 	  fi
++	  prefer_static_libs=built
+ 	fi
+ 	build_libtool_libs=no
+ 	build_old_libs=yes
+-	prefer_static_libs=yes
+ 	break
+ 	;;
+       esac
+@@ -884,20 +1164,27 @@ compiler."
+     test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+ 
+     # Go through the arguments, transforming them on the way.
+-    while test $# -gt 0; do
++    while test "$#" -gt 0; do
+       arg="$1"
+       shift
++      case $arg in
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
++	;;
++      *) qarg=$arg ;;
++      esac
++      libtool_args="$libtool_args $qarg"
+ 
+       # If the previous option needs an argument, assign it.
+       if test -n "$prev"; then
+-	case "$prev" in
++	case $prev in
+ 	output)
+ 	  compile_command="$compile_command @OUTPUT@"
+ 	  finalize_command="$finalize_command @OUTPUT@"
+ 	  ;;
+ 	esac
+ 
+-	case "$prev" in
++	case $prev in
+ 	dlfiles|dlprefiles)
+ 	  if test "$preload" = no; then
+ 	    # Add the symbol object into the linking commands.
+@@ -905,7 +1192,7 @@ compiler."
+ 	    finalize_command="$finalize_command @SYMFILE@"
+ 	    preload=yes
+ 	  fi
+-	  case "$arg" in
++	  case $arg in
+ 	  *.la | *.lo) ;;  # We handle these cases below.
+ 	  force)
+ 	    if test "$dlself" = no; then
+@@ -934,6 +1221,7 @@ compiler."
+ 	      dlprefiles="$dlprefiles $arg"
+ 	    fi
+ 	    prev=
++	    continue
+ 	    ;;
+ 	  esac
+ 	  ;;
+@@ -941,7 +1229,7 @@ compiler."
+ 	  export_symbols="$arg"
+ 	  if test ! -f "$arg"; then
+ 	    $echo "$modename: symbol file \`$arg' does not exist"
+-	    exit 1
++	    exit $EXIT_FAILURE
+ 	  fi
+ 	  prev=
+ 	  continue
+@@ -951,18 +1239,140 @@ compiler."
+ 	  prev=
+ 	  continue
+ 	  ;;
++	inst_prefix)
++	  inst_prefix_dir="$arg"
++	  prev=
++	  continue
++	  ;;
++	precious_regex)
++	  precious_files_regex="$arg"
++	  prev=
++	  continue
++	  ;;
+ 	release)
+ 	  release="-$arg"
+ 	  prev=
+ 	  continue
+ 	  ;;
++	objectlist)
++	  if test -f "$arg"; then
++	    save_arg=$arg
++	    moreargs=
++	    for fil in `cat $save_arg`
++	    do
++#	      moreargs="$moreargs $fil"
++	      arg=$fil
++	      # A libtool-controlled object.
++
++	      # Check to see that this really is a libtool object.
++	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++		pic_object=
++		non_pic_object=
++
++		# Read the .lo file
++		# If there is no directory component, then add one.
++		case $arg in
++		*/* | *\\*) . $arg ;;
++		*) . ./$arg ;;
++		esac
++
++		if test -z "$pic_object" || \
++		   test -z "$non_pic_object" ||
++		   test "$pic_object" = none && \
++		   test "$non_pic_object" = none; then
++		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
++		  exit $EXIT_FAILURE
++		fi
++
++		# Extract subdirectory from the argument.
++		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++		if test "X$xdir" = "X$arg"; then
++		  xdir=
++		else
++		  xdir="$xdir/"
++		fi
++
++		if test "$pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  pic_object="$xdir$pic_object"
++
++		  if test "$prev" = dlfiles; then
++		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		      dlfiles="$dlfiles $pic_object"
++		      prev=
++		      continue
++		    else
++		      # If libtool objects are unsupported, then we need to preload.
++		      prev=dlprefiles
++		    fi
++		  fi
++
++		  # CHECK ME:  I think I busted this.  -Ossama
++		  if test "$prev" = dlprefiles; then
++		    # Preload the old-style object.
++		    dlprefiles="$dlprefiles $pic_object"
++		    prev=
++		  fi
++
++		  # A PIC object.
++		  libobjs="$libobjs $pic_object"
++		  arg="$pic_object"
++		fi
++
++		# Non-PIC object.
++		if test "$non_pic_object" != none; then
++		  # Prepend the subdirectory the object is found in.
++		  non_pic_object="$xdir$non_pic_object"
++
++		  # A standard non-PIC object
++		  non_pic_objects="$non_pic_objects $non_pic_object"
++		  if test -z "$pic_object" || test "$pic_object" = none ; then
++		    arg="$non_pic_object"
++		  fi
++		else
++		  # If the PIC object exists, use it instead.
++		  # $xdir was prepended to $pic_object above.
++		  non_pic_object="$pic_object"
++		  non_pic_objects="$non_pic_objects $non_pic_object"
++		fi
++	      else
++		# Only an error if not doing a dry-run.
++		if test -z "$run"; then
++		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
++		  exit $EXIT_FAILURE
++		else
++		  # Dry-run case.
++
++		  # Extract subdirectory from the argument.
++		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++		  if test "X$xdir" = "X$arg"; then
++		    xdir=
++		  else
++		    xdir="$xdir/"
++		  fi
++
++		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
++		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
++		  libobjs="$libobjs $pic_object"
++		  non_pic_objects="$non_pic_objects $non_pic_object"
++		fi
++	      fi
++	    done
++	  else
++	    $echo "$modename: link input file \`$save_arg' does not exist"
++	    exit $EXIT_FAILURE
++	  fi
++	  arg=$save_arg
++	  prev=
++	  continue
++	  ;;
+ 	rpath | xrpath)
+ 	  # We need an absolute path.
+-	  case "$arg" in
++	  case $arg in
+ 	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+ 	  *)
+ 	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+-	    exit 1
++	    exit $EXIT_FAILURE
+ 	    ;;
+ 	  esac
+ 	  if test "$prev" = rpath; then
+@@ -979,17 +1389,52 @@ compiler."
+ 	  prev=
+ 	  continue
+ 	  ;;
++	xcompiler)
++	  compiler_flags="$compiler_flags $qarg"
++	  prev=
++	  compile_command="$compile_command $qarg"
++	  finalize_command="$finalize_command $qarg"
++	  continue
++	  ;;
++	xlinker)
++	  linker_flags="$linker_flags $qarg"
++	  compiler_flags="$compiler_flags $wl$qarg"
++	  prev=
++	  compile_command="$compile_command $wl$qarg"
++	  finalize_command="$finalize_command $wl$qarg"
++	  continue
++	  ;;
++	xcclinker)
++	  linker_flags="$linker_flags $qarg"
++	  compiler_flags="$compiler_flags $qarg"
++	  prev=
++	  compile_command="$compile_command $qarg"
++	  finalize_command="$finalize_command $qarg"
++	  continue
++	  ;;
++	shrext)
++  	  shrext_cmds="$arg"
++	  prev=
++	  continue
++	  ;;
++	darwin_framework|darwin_framework_skip)
++	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
++	  compile_command="$compile_command $arg"
++	  finalize_command="$finalize_command $arg"
++	  prev=
++	  continue
++	  ;;
+ 	*)
+ 	  eval "$prev=\"\$arg\""
+ 	  prev=
+ 	  continue
+ 	  ;;
+ 	esac
+-      fi
++      fi # test -n "$prev"
+ 
+       prevarg="$arg"
+ 
+-      case "$arg" in
++      case $arg in
+       -all-static)
+ 	if test -n "$link_static_flag"; then
+ 	  compile_command="$compile_command $link_static_flag"
+@@ -1026,8 +1471,8 @@ compiler."
+ 
+       -export-symbols | -export-symbols-regex)
+ 	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+-	  $echo "$modename: not more than one -exported-symbols argument allowed"
+-	  exit 1
++	  $echo "$modename: more than one -exported-symbols argument is not allowed"
++	  exit $EXIT_FAILURE
+ 	fi
+ 	if test "X$arg" = "X-export-symbols"; then
+ 	  prev=expsyms
+@@ -1037,58 +1482,129 @@ compiler."
+ 	continue
+ 	;;
+ 
++      -framework|-arch|-isysroot)
++	case " $CC " in
++	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
++		prev=darwin_framework_skip ;;
++	  *) compiler_flags="$compiler_flags $arg"
++	     prev=darwin_framework ;;
++	esac
++	compile_command="$compile_command $arg"
++	finalize_command="$finalize_command $arg"
++	continue
++	;;
++
++      -inst-prefix-dir)
++	prev=inst_prefix
++	continue
++	;;
++
++      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++      # so, if we see these flags be careful not to treat them like -L
++      -L[A-Z][A-Z]*:*)
++	case $with_gcc/$host in
++	no/*-*-irix* | /*-*-irix*)
++	  compile_command="$compile_command $arg"
++	  finalize_command="$finalize_command $arg"
++	  ;;
++	esac
++	continue
++	;;
++
+       -L*)
+ 	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+ 	# We need an absolute path.
+-	case "$dir" in
++	case $dir in
+ 	[\\/]* | [A-Za-z]:[\\/]*) ;;
+ 	*)
+ 	  absdir=`cd "$dir" && pwd`
+ 	  if test -z "$absdir"; then
+-	    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
++	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+ 	    absdir="$dir"
++	    notinst_path="$notinst_path $dir"
+ 	  fi
+ 	  dir="$absdir"
+ 	  ;;
+ 	esac
+-	case " $deplibs " in
+-	*" $arg "*) ;;
+-	*) deplibs="$deplibs $arg";;
+-	esac
+-	case " $lib_search_path " in
+-	*" $dir "*) ;;
+-	*) lib_search_path="$lib_search_path $dir";;
++	case "$deplibs " in
++	*" -L$dir "*) ;;
++	*)
++	  deplibs="$deplibs -L$dir"
++	  lib_search_path="$lib_search_path $dir"
++	  ;;
+ 	esac
+-	case "$host" in
+-	*-*-cygwin* | *-*-mingw* | *-*-os2*)
+-	  dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+-	  case ":$dllsearchpath:" in
+-	  ::) dllsearchpath="$dllsearchdir";;
+-	  *":$dllsearchdir:"*) ;;
+-	  *) dllsearchpath="$dllsearchpath:$dllsearchdir";;
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$dir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$dir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+ 	  esac
+ 	  ;;
+ 	esac
++	continue
+ 	;;
+ 
+       -l*)
+-	if test "$arg" = "-lc"; then
+-	  case "$host" in
+-	  *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos* |*-*-freebsd* )
+-	    # These systems don't actually have c library (as such)
++	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
++	    # These systems don't actually have a C or math library (as such)
+ 	    continue
+ 	    ;;
+-	  esac
+-	elif test "$arg" = "-lm"; then
+-	  case "$host" in
+-	  *-*-cygwin* | *-*-beos*)
+-	    # These systems don't actually have math library (as such)
++	  *-*-os2*)
++	    # These systems don't actually have a C library (as such)
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C and math libraries are in the System framework
++	    deplibs="$deplibs -framework System"
+ 	    continue
+ 	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    test "X$arg" = "X-lc" && continue
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    test "X$arg" = "X-lc" && continue
++	    ;;
+ 	  esac
++	elif test "X$arg" = "X-lc_r"; then
++	 case $host in
++	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	   # Do not include libc_r directly, use -pthread flag.
++	   continue
++	   ;;
++	 esac
+ 	fi
+ 	deplibs="$deplibs $arg"
++	continue
++	;;
++
++      # Tru64 UNIX uses -model [arg] to determine the layout of C++
++      # classes, name mangling, and exception handling.
++      -model)
++	compile_command="$compile_command $arg"
++	compiler_flags="$compiler_flags $arg"
++	finalize_command="$finalize_command $arg"
++	prev=xcompiler
++	continue
++	;;
++
++     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++	compiler_flags="$compiler_flags $arg"
++	compile_command="$compile_command $arg"
++	finalize_command="$finalize_command $arg"
++	continue
+ 	;;
+ 
+       -module)
+@@ -1096,13 +1612,74 @@ compiler."
+ 	continue
+ 	;;
+ 
++      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
++      # -r[0-9][0-9]* specifies the processor on the SGI compiler
++      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
++      # +DA*, +DD* enable 64-bit mode on the HP compiler
++      # -q* pass through compiler args for the IBM compiler
++      # -m* pass through architecture-specific compiler args for GCC
++      # -m*, -t[45]*, -txscale* pass through architecture-specific
++      # compiler args for GCC
++      # -pg pass through profiling flag for GCC
++      # @file GCC response files
++      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \
++      -t[45]*|-txscale*|@*)
++
++	# Unknown arguments in both finalize_command and compile_command need
++	# to be aesthetically quoted because they are evaled later.
++	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++	case $arg in
++	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	  arg="\"$arg\""
++	  ;;
++	esac
++        compile_command="$compile_command $arg"
++        finalize_command="$finalize_command $arg"
++        compiler_flags="$compiler_flags $arg"
++        continue
++        ;;
++
++      -shrext)
++	prev=shrext
++	continue
++	;;
++
++      -no-fast-install)
++	fast_install=no
++	continue
++	;;
++
++      -no-install)
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++	  # The PATH hackery in wrapper scripts is required on Windows
++	  # in order for the loader to find any dlls it needs.
++	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
++	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
++	  fast_install=no
++	  ;;
++	*) no_install=yes ;;
++	esac
++	continue
++	;;
++
+       -no-undefined)
+ 	allow_undefined=no
+ 	continue
+ 	;;
+ 
++      -objectlist)
++	prev=objectlist
++	continue
++	;;
++
+       -o) prev=output ;;
+ 
++      -precious-files-regex)
++	prev=precious_regex
++	continue
++	;;
++
+       -release)
+ 	prev=release
+ 	continue
+@@ -1121,11 +1698,11 @@ compiler."
+       -R*)
+ 	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+ 	# We need an absolute path.
+-	case "$dir" in
++	case $dir in
+ 	[\\/]* | [A-Za-z]:[\\/]*) ;;
+ 	*)
+ 	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+ 	case "$xrpath " in
+@@ -1136,11 +1713,11 @@ compiler."
+ 	;;
+ 
+       -static)
+-	# If we have no pic_flag, then this is the same as -all-static.
+-	if test -z "$pic_flag" && test -n "$link_static_flag"; then
+-	  compile_command="$compile_command $link_static_flag"
+-	  finalize_command="$finalize_command $link_static_flag"
+-	fi
++	# The effects of -static are defined in a previous loop.
++	# We used to do the same as -all-static on platforms that
++	# didn't have a PIC flag, but the assumption that the effects
++	# would be equivalent was wrong.  It would break on at least
++	# Digital Unix and AIX.
+ 	continue
+ 	;;
+ 
+@@ -1153,388 +1730,1335 @@ compiler."
+ 	prev=vinfo
+ 	continue
+ 	;;
++      -version-number)
++	prev=vinfo
++	vinfo_number=yes
++	continue
++	;;
++
++      -Wc,*)
++	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++	  case $flag in
++	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	    flag="\"$flag\""
++	    ;;
++	  esac
++	  arg="$arg $wl$flag"
++	  compiler_flags="$compiler_flags $flag"
++	done
++	IFS="$save_ifs"
++	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
++	;;
++
++      -Wl,*)
++	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
++	arg=
++	save_ifs="$IFS"; IFS=','
++	for flag in $args; do
++	  IFS="$save_ifs"
++	  case $flag in
++	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	    flag="\"$flag\""
++	    ;;
++	  esac
++	  arg="$arg $wl$flag"
++	  compiler_flags="$compiler_flags $wl$flag"
++	  linker_flags="$linker_flags $flag"
++	done
++	IFS="$save_ifs"
++	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
++	;;
++
++      -Xcompiler)
++	prev=xcompiler
++	continue
++	;;
++
++      -Xlinker)
++	prev=xlinker
++	continue
++	;;
++
++      -XCClinker)
++	prev=xcclinker
++	continue
++	;;
+ 
+       # Some other compiler flag.
+       -* | +*)
+ 	# Unknown arguments in both finalize_command and compile_command need
+ 	# to be aesthetically quoted because they are evaled later.
+ 	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-	case "$arg" in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
++	case $arg in
++	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+ 	  arg="\"$arg\""
+ 	  ;;
+ 	esac
+ 	;;
+ 
+-      *.o | *.obj | *.a | *.lib)
++      *.$objext)
+ 	# A standard object.
+ 	objs="$objs $arg"
+ 	;;
+ 
+       *.lo)
+-	# A library object.
+-	if test "$prev" = dlfiles; then
+-	  dlfiles="$dlfiles $arg"
+-	  if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then
+-	    prev=
+-	    continue
++	# A libtool-controlled object.
++
++	# Check to see that this really is a libtool object.
++	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++	  pic_object=
++	  non_pic_object=
++
++	  # Read the .lo file
++	  # If there is no directory component, then add one.
++	  case $arg in
++	  */* | *\\*) . $arg ;;
++	  *) . ./$arg ;;
++	  esac
++
++	  if test -z "$pic_object" || \
++	     test -z "$non_pic_object" ||
++	     test "$pic_object" = none && \
++	     test "$non_pic_object" = none; then
++	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++
++	  # Extract subdirectory from the argument.
++	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++	  if test "X$xdir" = "X$arg"; then
++	    xdir=
++ 	  else
++	    xdir="$xdir/"
++	  fi
++
++	  if test "$pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    pic_object="$xdir$pic_object"
++
++	    if test "$prev" = dlfiles; then
++	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++		dlfiles="$dlfiles $pic_object"
++		prev=
++		continue
++	      else
++		# If libtool objects are unsupported, then we need to preload.
++		prev=dlprefiles
++	      fi
++	    fi
++
++	    # CHECK ME:  I think I busted this.  -Ossama
++	    if test "$prev" = dlprefiles; then
++	      # Preload the old-style object.
++	      dlprefiles="$dlprefiles $pic_object"
++	      prev=
++	    fi
++
++	    # A PIC object.
++	    libobjs="$libobjs $pic_object"
++	    arg="$pic_object"
++	  fi
++
++	  # Non-PIC object.
++	  if test "$non_pic_object" != none; then
++	    # Prepend the subdirectory the object is found in.
++	    non_pic_object="$xdir$non_pic_object"
++
++	    # A standard non-PIC object
++	    non_pic_objects="$non_pic_objects $non_pic_object"
++	    if test -z "$pic_object" || test "$pic_object" = none ; then
++	      arg="$non_pic_object"
++	    fi
+ 	  else
+-	    # If libtool objects are unsupported, then we need to preload.
+-	    prev=dlprefiles
++	    # If the PIC object exists, use it instead.
++	    # $xdir was prepended to $pic_object above.
++	    non_pic_object="$pic_object"
++	    non_pic_objects="$non_pic_objects $non_pic_object"
+ 	  fi
+-	fi
++	else
++	  # Only an error if not doing a dry-run.
++	  if test -z "$run"; then
++	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
++	    exit $EXIT_FAILURE
++	  else
++	    # Dry-run case.
+ 
+-	if test "$prev" = dlprefiles; then
+-	  # Preload the old-style object.
+-	  dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
+-	  prev=
++	    # Extract subdirectory from the argument.
++	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
++	    if test "X$xdir" = "X$arg"; then
++	      xdir=
++	    else
++	      xdir="$xdir/"
++	    fi
++
++	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
++	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
++	    libobjs="$libobjs $pic_object"
++	    non_pic_objects="$non_pic_objects $non_pic_object"
++	  fi
+ 	fi
+-	libobjs="$libobjs $arg"
++	;;
++
++      *.$libext)
++	# An archive.
++	deplibs="$deplibs $arg"
++	old_deplibs="$old_deplibs $arg"
++	continue
+ 	;;
+ 
+       *.la)
+ 	# A libtool-controlled library.
+ 
+-	dlname=
+-	libdir=
+-	library_names=
+-	old_library=
++	if test "$prev" = dlfiles; then
++	  # This library was specified with -dlopen.
++	  dlfiles="$dlfiles $arg"
++	  prev=
++	elif test "$prev" = dlprefiles; then
++	  # The library was specified with -dlpreopen.
++	  dlprefiles="$dlprefiles $arg"
++	  prev=
++	else
++	  deplibs="$deplibs $arg"
++	fi
++	continue
++	;;
++
++      # Some other compiler argument.
++      *)
++	# Unknown arguments in both finalize_command and compile_command need
++	# to be aesthetically quoted because they are evaled later.
++	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++	case $arg in
++	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
++	  arg="\"$arg\""
++	  ;;
++	esac
++	;;
++      esac # arg
++
++      # Now actually substitute the argument into the commands.
++      if test -n "$arg"; then
++	compile_command="$compile_command $arg"
++	finalize_command="$finalize_command $arg"
++      fi
++    done # argument parsing loop
++
++    if test -n "$prev"; then
++      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
++      $echo "$help" 1>&2
++      exit $EXIT_FAILURE
++    fi
++
++    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++      eval arg=\"$export_dynamic_flag_spec\"
++      compile_command="$compile_command $arg"
++      finalize_command="$finalize_command $arg"
++    fi
++
++    oldlibs=
++    # calculate the name of the file, without its directory
++    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
++    libobjs_save="$libobjs"
++
++    if test -n "$shlibpath_var"; then
++      # get the directories listed in $shlibpath_var
++      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
++    else
++      shlib_search_path=
++    fi
++    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++
++    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
++    if test "X$output_objdir" = "X$output"; then
++      output_objdir="$objdir"
++    else
++      output_objdir="$output_objdir/$objdir"
++    fi
++    # Create the object directory.
++    if test ! -d "$output_objdir"; then
++      $show "$mkdir $output_objdir"
++      $run $mkdir $output_objdir
++      exit_status=$?
++      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
++	exit $exit_status
++      fi
++    fi
++
++    # Determine the type of output
++    case $output in
++    "")
++      $echo "$modename: you must specify an output file" 1>&2
++      $echo "$help" 1>&2
++      exit $EXIT_FAILURE
++      ;;
++    *.$libext) linkmode=oldlib ;;
++    *.lo | *.$objext) linkmode=obj ;;
++    *.la) linkmode=lib ;;
++    *) linkmode=prog ;; # Anything else should be a program.
++    esac
++
++    case $host in
++    *cygwin* | *mingw* | *pw32*)
++      # don't eliminate duplications in $postdeps and $predeps
++      duplicate_compiler_generated_deps=yes
++      ;;
++    *)
++      duplicate_compiler_generated_deps=$duplicate_deps
++      ;;
++    esac
++    specialdeplibs=
++
++    libs=
++    # Find all interdependent deplibs by searching for libraries
++    # that are linked more than once (e.g. -la -lb -la)
++    for deplib in $deplibs; do
++      if test "X$duplicate_deps" = "Xyes" ; then
++	case "$libs " in
++	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	esac
++      fi
++      libs="$libs $deplib"
++    done
++
++    if test "$linkmode" = lib; then
++      libs="$predeps $libs $compiler_lib_search_path $postdeps"
++
++      # Compute libraries that are listed more than once in $predeps
++      # $postdeps and mark them as special (i.e., whose duplicates are
++      # not to be eliminated).
++      pre_post_deps=
++      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
++	for pre_post_dep in $predeps $postdeps; do
++	  case "$pre_post_deps " in
++	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
++	  esac
++	  pre_post_deps="$pre_post_deps $pre_post_dep"
++	done
++      fi
++      pre_post_deps=
++    fi
++
++    deplibs=
++    newdependency_libs=
++    newlib_search_path=
++    need_relink=no # whether we're linking any uninstalled libtool libraries
++    notinst_deplibs= # not-installed libtool libraries
++    case $linkmode in
++    lib)
++	passes="conv link"
++	for file in $dlfiles $dlprefiles; do
++	  case $file in
++	  *.la) ;;
++	  *)
++	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
++	    exit $EXIT_FAILURE
++	    ;;
++	  esac
++	done
++	;;
++    prog)
++	compile_deplibs=
++	finalize_deplibs=
++	alldeplibs=no
++	newdlfiles=
++	newdlprefiles=
++	passes="conv scan dlopen dlpreopen link"
++	;;
++    *)  passes="conv"
++	;;
++    esac
++    for pass in $passes; do
++      if test "$linkmode,$pass" = "lib,link" ||
++	 test "$linkmode,$pass" = "prog,scan"; then
++	libs="$deplibs"
++	deplibs=
++      fi
++      if test "$linkmode" = prog; then
++	case $pass in
++	dlopen) libs="$dlfiles" ;;
++	dlpreopen) libs="$dlprefiles" ;;
++	link)
++	  libs="$deplibs %DEPLIBS%"
++	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
++	  ;;
++	esac
++      fi
++      if test "$pass" = dlopen; then
++	# Collect dlpreopened libraries
++	save_deplibs="$deplibs"
++	deplibs=
++      fi
++      for deplib in $libs; do
++	lib=
++	found=no
++	case $deplib in
++	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
++	  if test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$deplib $compile_deplibs"
++	    finalize_deplibs="$deplib $finalize_deplibs"
++	  else
++	    compiler_flags="$compiler_flags $deplib"
++	  fi
++	  continue
++	  ;;
++	-l*)
++	  if test "$linkmode" != lib && test "$linkmode" != prog; then
++	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
++	    continue
++	  fi
++	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
++	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
++	    for search_ext in .la $std_shrext .so .a; do
++	      # Search the libtool library
++	      lib="$searchdir/lib${name}${search_ext}"
++	      if test -f "$lib"; then
++		if test "$search_ext" = ".la"; then
++		  found=yes
++		else
++		  found=no
++		fi
++		break 2
++	      fi
++	    done
++	  done
++	  if test "$found" != yes; then
++	    # deplib doesn't seem to be a libtool library
++	    if test "$linkmode,$pass" = "prog,link"; then
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      deplibs="$deplib $deplibs"
++	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++	    fi
++	    continue
++	  else # deplib is a libtool library
++	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
++	    # We need to do some special things here, and not later.
++	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	      case " $predeps $postdeps " in
++	      *" $deplib "*)
++		if (${SED} -e '2q' $lib |
++                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++		  library_names=
++		  old_library=
++		  case $lib in
++		  */* | *\\*) . $lib ;;
++		  *) . ./$lib ;;
++		  esac
++		  for l in $old_library $library_names; do
++		    ll="$l"
++		  done
++		  if test "X$ll" = "X$old_library" ; then # only static version available
++		    found=no
++		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
++		    test "X$ladir" = "X$lib" && ladir="."
++		    lib=$ladir/$old_library
++		    if test "$linkmode,$pass" = "prog,link"; then
++		      compile_deplibs="$deplib $compile_deplibs"
++		      finalize_deplibs="$deplib $finalize_deplibs"
++		    else
++		      deplibs="$deplib $deplibs"
++		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++		    fi
++		    continue
++		  fi
++		fi
++	        ;;
++	      *) ;;
++	      esac
++	    fi
++	  fi
++	  ;; # -l
++	-L*)
++	  case $linkmode in
++	  lib)
++	    deplibs="$deplib $deplibs"
++	    test "$pass" = conv && continue
++	    newdependency_libs="$deplib $newdependency_libs"
++	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
++	    ;;
++	  prog)
++	    if test "$pass" = conv; then
++	      deplibs="$deplib $deplibs"
++	      continue
++	    fi
++	    if test "$pass" = scan; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
++	    ;;
++	  *)
++	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
++	    ;;
++	  esac # linkmode
++	  continue
++	  ;; # -L
++	-R*)
++	  if test "$pass" = link; then
++	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
++	    # Make sure the xrpath contains only unique directories.
++	    case "$xrpath " in
++	    *" $dir "*) ;;
++	    *) xrpath="$xrpath $dir" ;;
++	    esac
++	  fi
++	  deplibs="$deplib $deplibs"
++	  continue
++	  ;;
++	*.la) lib="$deplib" ;;
++	*.$libext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	    continue
++	  fi
++	  case $linkmode in
++	  lib)
++	    valid_a_lib=no
++	    case $deplibs_check_method in
++	      match_pattern*)
++		set dummy $deplibs_check_method
++	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++		if eval $echo \"$deplib\" 2>/dev/null \
++		    | $SED 10q \
++		    | $EGREP "$match_pattern_regex" > /dev/null; then
++		  valid_a_lib=yes
++		fi
++		;;
++	      pass_all)
++		valid_a_lib=yes
++		;;
++            esac
++	    if test "$valid_a_lib" != yes; then
++	      $echo
++	      $echo "*** Warning: Trying to link with static lib archive $deplib."
++	      $echo "*** I have the capability to make that library automatically link in when"
++	      $echo "*** you link to this library.  But I can only do this if you have a"
++	      $echo "*** shared version of the library, which you do not appear to have"
++	      $echo "*** because the file extensions .$libext of this argument makes me believe"
++	      $echo "*** that it is just a static archive that I should not used here."
++	    else
++	      $echo
++	      $echo "*** Warning: Linking the shared library $output against the"
++	      $echo "*** static library $deplib is not portable!"
++	      deplibs="$deplib $deplibs"
++	    fi
++	    continue
++	    ;;
++	  prog)
++	    if test "$pass" != link; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    fi
++	    continue
++	    ;;
++	  esac # linkmode
++	  ;; # *.$libext
++	*.lo | *.$objext)
++	  if test "$pass" = conv; then
++	    deplibs="$deplib $deplibs"
++	  elif test "$linkmode" = prog; then
++	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++	      # If there is no dlopen support or we're linking statically,
++	      # we need to preload.
++	      newdlprefiles="$newdlprefiles $deplib"
++	      compile_deplibs="$deplib $compile_deplibs"
++	      finalize_deplibs="$deplib $finalize_deplibs"
++	    else
++	      newdlfiles="$newdlfiles $deplib"
++	    fi
++	  fi
++	  continue
++	  ;;
++	%DEPLIBS%)
++	  alldeplibs=yes
++	  continue
++	  ;;
++	esac # case $deplib
++	if test "$found" = yes || test -f "$lib"; then :
++	else
++	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
++	  exit $EXIT_FAILURE
++	fi
+ 
+ 	# Check to see that this really is a libtool archive.
+-	if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ 	else
+-	  $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2
+-	  exit 1
++	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++	  exit $EXIT_FAILURE
+ 	fi
+ 
++	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
++	test "X$ladir" = "X$lib" && ladir="."
++
++	dlname=
++	dlopen=
++	dlpreopen=
++	libdir=
++	library_names=
++	old_library=
+ 	# If the library was installed with an old release of libtool,
+-	# it will not redefine variable installed.
++	# it will not redefine variables installed, or shouldnotlink
+ 	installed=yes
++	shouldnotlink=no
++	avoidtemprpath=
++
+ 
+ 	# Read the .la file
+-	# If there is no directory component, then add one.
+-	case "$arg" in
+-	*/* | *\\*) . $arg ;;
+-	*) . ./$arg ;;
++	case $lib in
++	*/* | *\\*) . $lib ;;
++	*) . ./$lib ;;
+ 	esac
+ 
++	if test "$linkmode,$pass" = "lib,link" ||
++	   test "$linkmode,$pass" = "prog,scan" ||
++	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
++	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
++	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
++	fi
++
++	if test "$pass" = conv; then
++	  # Only check for convenience libraries
++	  deplibs="$lib $deplibs"
++	  if test -z "$libdir"; then
++	    if test -z "$old_library"; then
++	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
++	      exit $EXIT_FAILURE
++	    fi
++	    # It is a libtool convenience library, so add in its objects.
++	    convenience="$convenience $ladir/$objdir/$old_library"
++	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
++	    tmp_libs=
++	    for deplib in $dependency_libs; do
++	      deplibs="$deplib $deplibs"
++              if test "X$duplicate_deps" = "Xyes" ; then
++	        case "$tmp_libs " in
++	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	        esac
++              fi
++	      tmp_libs="$tmp_libs $deplib"
++	    done
++	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
++	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++	  continue
++	fi # $pass = conv
++
++
+ 	# Get the name of the library we link against.
+ 	linklib=
+ 	for l in $old_library $library_names; do
+ 	  linklib="$l"
+ 	done
+-
+ 	if test -z "$linklib"; then
+-	  $echo "$modename: cannot find name of link library for \`$arg'" 1>&2
+-	  exit 1
++	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
++	  exit $EXIT_FAILURE
+ 	fi
+ 
++	# This library was specified with -dlopen.
++	if test "$pass" = dlopen; then
++	  if test -z "$libdir"; then
++	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++	  if test -z "$dlname" ||
++	     test "$dlopen_support" != yes ||
++	     test "$build_libtool_libs" = no; then
++	    # If there is no dlname, no dlopen support or we're linking
++	    # statically, we need to preload.  We also need to preload any
++	    # dependent libraries so libltdl's deplib preloader doesn't
++	    # bomb out in the load deplibs phase.
++	    dlprefiles="$dlprefiles $lib $dependency_libs"
++	  else
++	    newdlfiles="$newdlfiles $lib"
++	  fi
++	  continue
++	fi # $pass = dlopen
++
++	# We need an absolute path.
++	case $ladir in
++	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
++	*)
++	  abs_ladir=`cd "$ladir" && pwd`
++	  if test -z "$abs_ladir"; then
++	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
++	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
++	    abs_ladir="$ladir"
++	  fi
++	  ;;
++	esac
++	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++
+ 	# Find the relevant object directory and library name.
+-	name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'`
+-
+ 	if test "X$installed" = Xyes; then
+-	  dir="$libdir"
++	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    libdir="$abs_ladir"
++	  else
++	    dir="$libdir"
++	    absdir="$libdir"
++	  fi
++	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ 	else
+-	  dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+-	  if test "X$dir" = "X$arg"; then
+-	    dir="$objdir"
++	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++	    dir="$ladir"
++	    absdir="$abs_ladir"
++	    # Remove this search path later
++	    notinst_path="$notinst_path $abs_ladir"
++	  else
++	    dir="$ladir/$objdir"
++	    absdir="$abs_ladir/$objdir"
++	    # Remove this search path later
++	    notinst_path="$notinst_path $abs_ladir"
++	  fi
++	fi # $installed = yes
++	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++
++	# This library was specified with -dlpreopen.
++	if test "$pass" = dlpreopen; then
++	  if test -z "$libdir"; then
++	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++	  # Prefer using a static library (so that no silly _DYNAMIC symbols
++	  # are required to link).
++	  if test -n "$old_library"; then
++	    newdlprefiles="$newdlprefiles $dir/$old_library"
++	  # Otherwise, use the dlname, so that lt_dlopen finds it.
++	  elif test -n "$dlname"; then
++	    newdlprefiles="$newdlprefiles $dir/$dlname"
+ 	  else
+-	    dir="$dir/$objdir"
++	    newdlprefiles="$newdlprefiles $dir/$linklib"
+ 	  fi
++	fi # $pass = dlpreopen
++
++	if test -z "$libdir"; then
++	  # Link the convenience library
++	  if test "$linkmode" = lib; then
++	    deplibs="$dir/$old_library $deplibs"
++	  elif test "$linkmode,$pass" = "prog,link"; then
++	    compile_deplibs="$dir/$old_library $compile_deplibs"
++	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
++	  else
++	    deplibs="$lib $deplibs" # used for prog,scan pass
++	  fi
++	  continue
+ 	fi
+ 
+-	if test -n "$dependency_libs"; then
+-	  # Extract -R and -L from dependency_libs
+-	  temp_deplibs=
++
++	if test "$linkmode" = prog && test "$pass" != link; then
++	  newlib_search_path="$newlib_search_path $ladir"
++	  deplibs="$lib $deplibs"
++
++	  linkalldeplibs=no
++	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
++	     test "$build_libtool_libs" = no; then
++	    linkalldeplibs=yes
++	  fi
++
++	  tmp_libs=
+ 	  for deplib in $dependency_libs; do
+-	    case "$deplib" in
+-	    -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+-		 case " $rpath $xrpath " in
+-		 *" $temp_xrpath "*) ;;
+-		 *) xrpath="$xrpath $temp_xrpath";;
+-		 esac;;
+-	    -L*) case "$compile_command $temp_deplibs " in
+-		 *" $deplib "*) ;;
+-		 *) temp_deplibs="$temp_deplibs $deplib";;
+-		 esac
+-		 temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+-		 case " $lib_search_path " in
+-		 *" $temp_dir "*) ;;
+-		 *) lib_search_path="$lib_search_path $temp_dir";;
+-		 esac
+-		 ;;
+-	    *) temp_deplibs="$temp_deplibs $deplib";;
++	    case $deplib in
++	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+ 	    esac
+-	  done
+-	  dependency_libs="$temp_deplibs"
+-	fi
+-
+-	if test -z "$libdir"; then
+-	  # It is a libtool convenience library, so add in its objects.
+-	  convenience="$convenience $dir/$old_library"
+-	  old_convenience="$old_convenience $dir/$old_library"
+-	  deplibs="$deplibs$dependency_libs"
+-	  compile_command="$compile_command $dir/$old_library$dependency_libs"
+-	  finalize_command="$finalize_command $dir/$old_library$dependency_libs"
++	    # Need to link against all dependency_libs?
++	    if test "$linkalldeplibs" = yes; then
++	      deplibs="$deplib $deplibs"
++	    else
++	      # Need to hardcode shared library paths
++	      # or/and link against static libraries
++	      newdependency_libs="$deplib $newdependency_libs"
++	    fi
++	    if test "X$duplicate_deps" = "Xyes" ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      esac
++	    fi
++	    tmp_libs="$tmp_libs $deplib"
++	  done # for deplib
+ 	  continue
+-	fi
++	fi # $linkmode = prog...
+ 
+-	# This library was specified with -dlopen.
+-	if test "$prev" = dlfiles; then
+-	  dlfiles="$dlfiles $arg"
+-	  if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then
+-	    # If there is no dlname, no dlopen support or we're linking statically,
+-	    # we need to preload.
+-	    prev=dlprefiles
+-	  else
+-	    # We should not create a dependency on this library, but we
+-	    # may need any libraries it requires.
+-	    compile_command="$compile_command$dependency_libs"
+-	    finalize_command="$finalize_command$dependency_libs"
+-	    prev=
++	if test "$linkmode,$pass" = "prog,link"; then
++	  if test -n "$library_names" &&
++	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++	    # We need to hardcode the library path
++	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
++	      # Make sure the rpath contains only unique directories.
++	      case "$temp_rpath " in
++	      *" $dir "*) ;;
++	      *" $absdir "*) ;;
++	      *) temp_rpath="$temp_rpath $absdir" ;;
++	      esac
++	    fi
++
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
++	    *" $absdir "*) ;;
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) compile_rpath="$compile_rpath $absdir"
++	      esac
++	      ;;
++	    esac
++	    case " $sys_lib_dlsearch_path " in
++	    *" $libdir "*) ;;
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) finalize_rpath="$finalize_rpath $libdir"
++	      esac
++	      ;;
++	    esac
++	  fi # $linkmode,$pass = prog,link...
++
++	  if test "$alldeplibs" = yes &&
++	     { test "$deplibs_check_method" = pass_all ||
++	       { test "$build_libtool_libs" = yes &&
++		 test -n "$library_names"; }; }; then
++	    # We only need to search for static libraries
+ 	    continue
+ 	  fi
+ 	fi
+ 
+-	# The library was specified with -dlpreopen.
+-	if test "$prev" = dlprefiles; then
+-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+-	  # are required to link).
+-	  if test -n "$old_library"; then
+-	    dlprefiles="$dlprefiles $dir/$old_library"
+-	  else
+-	    dlprefiles="$dlprefiles $dir/$linklib"
+-	  fi
+-	  prev=
++	link_static=no # Whether the deplib will be linked statically
++	use_static_libs=$prefer_static_libs
++	if test "$use_static_libs" = built && test "$installed" = yes ; then
++	  use_static_libs=no
+ 	fi
+-
+ 	if test -n "$library_names" &&
+-	   { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
+-	  link_against_libtool_libs="$link_against_libtool_libs $arg"
+-	  if test -n "$shlibpath_var"; then
+-	    # Make sure the rpath contains only unique directories.
+-	    case "$temp_rpath " in
+-	    *" $dir "*) ;;
+-	    *) temp_rpath="$temp_rpath $dir" ;;
+-	    esac
+-	  fi
+-
+-	  # We need an absolute path.
+-	  case "$dir" in
+-	  [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+-	  *)
+-	    absdir=`cd "$dir" && pwd`
+-	    if test -z "$absdir"; then
+-	      $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+-	      $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+-	      absdir="$dir"
++	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
++	  if test "$installed" = no; then
++	    notinst_deplibs="$notinst_deplibs $lib"
++	    need_relink=yes
++	  fi
++	  # This is a shared library
++
++	  # Warn about portability, can't link against -module's on
++	  # some systems (darwin)
++	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
++	    $echo
++	    if test "$linkmode" = prog; then
++	      $echo "*** Warning: Linking the executable $output against the loadable module"
++	    else
++	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+ 	    fi
+-	    ;;
+-	  esac
+-	  
+-	  # This is the magic to use -rpath.
+-	  # Skip directories that are in the system default run-time
+-	  # search path, unless they have been requested with -R.
+-	  case " $sys_lib_dlsearch_path " in
+-	  *" $absdir "*) ;;
+-	  *)
+-	    case "$compile_rpath " in
++	    $echo "*** $linklib is not portable!"
++	  fi
++	  if test "$linkmode" = lib &&
++	     test "$hardcode_into_libs" = yes; then
++	    # Hardcode the library path.
++	    # Skip directories that are in the system default run-time
++	    # search path.
++	    case " $sys_lib_dlsearch_path " in
+ 	    *" $absdir "*) ;;
+-	    *) compile_rpath="$compile_rpath $absdir" 
++	    *)
++	      case "$compile_rpath " in
++	      *" $absdir "*) ;;
++	      *) compile_rpath="$compile_rpath $absdir"
++	      esac
++	      ;;
+ 	    esac
+-	    ;;
+-	  esac
+-
+-	  case " $sys_lib_dlsearch_path " in
+-	  *" $libdir "*) ;;
+-	  *)
+-	    case "$finalize_rpath " in
++	    case " $sys_lib_dlsearch_path " in
+ 	    *" $libdir "*) ;;
+-	    *) finalize_rpath="$finalize_rpath $libdir"
++	    *)
++	      case "$finalize_rpath " in
++	      *" $libdir "*) ;;
++	      *) finalize_rpath="$finalize_rpath $libdir"
++	      esac
++	      ;;
+ 	    esac
+-	    ;;
+-	  esac
++	  fi
+ 
+-	  lib_linked=yes
+-	  case "$hardcode_action" in
+-	  immediate | unsupported)
+-	    if test "$hardcode_direct" = no; then
+-	      compile_command="$compile_command $dir/$linklib"
+-	      deplibs="$deplibs $dir/$linklib"
+-	      case "$host" in
+-	      *-*-cygwin* | *-*-mingw* | *-*-os2*)
+-		dllsearchdir=`cd "$dir" && pwd || echo "$dir"`
+-		if test -n "$dllsearchpath"; then
+-		  dllsearchpath="$dllsearchpath:$dllsearchdir"
+-		else
+-		  dllsearchpath="$dllsearchdir"
+-		fi
+-		;;
+-	      esac
+-	    elif test "$hardcode_minus_L" = no; then
+-	      case "$host" in
+-	      *-*-sunos*)
+-		compile_shlibpath="$compile_shlibpath$dir:"
++	  if test -n "$old_archive_from_expsyms_cmds"; then
++	    # figure out the soname
++	    set dummy $library_names
++	    realname="$2"
++	    shift; shift
++	    libname=`eval \\$echo \"$libname_spec\"`
++	    # use dlname if we got it. it's perfectly good, no?
++	    if test -n "$dlname"; then
++	      soname="$dlname"
++	    elif test -n "$soname_spec"; then
++	      # bleh windows
++	      case $host in
++	      *cygwin* | mingw*)
++		major=`expr $current - $age`
++		versuffix="-$major"
+ 		;;
+ 	      esac
+-	      case "$compile_command " in
+-	      *" -L$dir "*) ;;
+-	      *) compile_command="$compile_command -L$dir";;
+-	      esac
+-	      compile_command="$compile_command -l$name"
+-	      deplibs="$deplibs -L$dir -l$name"
+-	    elif test "$hardcode_shlibpath_var" = no; then
+-	      case ":$compile_shlibpath:" in
+-	      *":$dir:"*) ;;
+-	      *) compile_shlibpath="$compile_shlibpath$dir:";;
++	      eval soname=\"$soname_spec\"
++	    else
++	      soname="$realname"
++	    fi
++
++	    # Make a new name for the extract_expsyms_cmds to use
++	    soroot="$soname"
++	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
++	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
++
++	    # If the library has no export list, then create one now
++	    if test -f "$output_objdir/$soname-def"; then :
++	    else
++	      $show "extracting exported symbol list from \`$soname'"
++	      save_ifs="$IFS"; IFS='~'
++	      cmds=$extract_expsyms_cmds
++	      for cmd in $cmds; do
++		IFS="$save_ifs"
++		eval cmd=\"$cmd\"
++		$show "$cmd"
++		$run eval "$cmd" || exit $?
++	      done
++	      IFS="$save_ifs"
++	    fi
++
++	    # Create $newlib
++	    if test -f "$output_objdir/$newlib"; then :; else
++	      $show "generating import library for \`$soname'"
++	      save_ifs="$IFS"; IFS='~'
++	      cmds=$old_archive_from_expsyms_cmds
++	      for cmd in $cmds; do
++		IFS="$save_ifs"
++		eval cmd=\"$cmd\"
++		$show "$cmd"
++		$run eval "$cmd" || exit $?
++	      done
++	      IFS="$save_ifs"
++	    fi
++	    # make sure the library variables are pointing to the new library
++	    dir=$output_objdir
++	    linklib=$newlib
++	  fi # test -n "$old_archive_from_expsyms_cmds"
++
++	  if test "$linkmode" = prog || test "$mode" != relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    lib_linked=yes
++	    case $hardcode_action in
++	    immediate | unsupported)
++	      if test "$hardcode_direct" = no; then
++		add="$dir/$linklib"
++		case $host in
++		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
++		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
++		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
++		    *-*-unixware7*) add_dir="-L$dir" ;;
++		  *-*-darwin* )
++		    # if the lib is a module then we can not link against
++		    # it, someone is ignoring the new warnings I added
++		    if /usr/bin/file -L $add 2> /dev/null |
++                      $EGREP ": [^:]* bundle" >/dev/null ; then
++		      $echo "** Warning, lib $linklib is a module, not a shared library"
++		      if test -z "$old_library" ; then
++		        $echo
++		        $echo "** And there doesn't seem to be a static archive available"
++		        $echo "** The link will probably fail, sorry"
++		      else
++		        add="$dir/$old_library"
++		      fi
++		    fi
++		esac
++	      elif test "$hardcode_minus_L" = no; then
++		case $host in
++		*-*-sunos*) add_shlibpath="$dir" ;;
++		esac
++		add_dir="-L$dir"
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = no; then
++		add_shlibpath="$dir"
++		add="-l$name"
++	      else
++		lib_linked=no
++	      fi
++	      ;;
++	    relink)
++	      if test "$hardcode_direct" = yes; then
++		add="$dir/$linklib"
++	      elif test "$hardcode_minus_L" = yes; then
++		add_dir="-L$dir"
++		# Try looking first in the location we're being installed to.
++		if test -n "$inst_prefix_dir"; then
++		  case $libdir in
++		    [\\/]*)
++		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
++		      ;;
++		  esac
++		fi
++		add="-l$name"
++	      elif test "$hardcode_shlibpath_var" = yes; then
++		add_shlibpath="$dir"
++		add="-l$name"
++	      else
++		lib_linked=no
++	      fi
++	      ;;
++	    *) lib_linked=no ;;
++	    esac
++
++	    if test "$lib_linked" != yes; then
++	      $echo "$modename: configuration error: unsupported hardcode properties"
++	      exit $EXIT_FAILURE
++	    fi
++
++	    if test -n "$add_shlibpath"; then
++	      case :$compile_shlibpath: in
++	      *":$add_shlibpath:"*) ;;
++	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ 	      esac
+-	      compile_command="$compile_command -l$name"
+-	      deplibs="$deplibs -l$name"
++	    fi
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ 	    else
+-	      lib_linked=no
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	      if test "$hardcode_direct" != yes && \
++		 test "$hardcode_minus_L" != yes && \
++		 test "$hardcode_shlibpath_var" = yes; then
++		case :$finalize_shlibpath: in
++		*":$libdir:"*) ;;
++		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++		esac
++	      fi
+ 	    fi
+-	    ;;
++	  fi
+ 
+-	  relink)
++	  if test "$linkmode" = prog || test "$mode" = relink; then
++	    add_shlibpath=
++	    add_dir=
++	    add=
++	    # Finalize command for both is simple: just hardcode it.
+ 	    if test "$hardcode_direct" = yes; then
+-	      compile_command="$compile_command $absdir/$linklib"
+-	      deplibs="$deplibs $absdir/$linklib"
++	      add="$libdir/$linklib"
+ 	    elif test "$hardcode_minus_L" = yes; then
+-	      case "$compile_command " in
+-	      *" -L$absdir "*) ;;
+-	      *) compile_command="$compile_command -L$absdir";;
+-	      esac
+-	      compile_command="$compile_command -l$name"
+-	      deplibs="$deplibs -L$absdir -l$name"
++	      add_dir="-L$libdir"
++	      add="-l$name"
+ 	    elif test "$hardcode_shlibpath_var" = yes; then
+-	      case ":$compile_shlibpath:" in
+-	      *":$absdir:"*) ;;
+-	      *) compile_shlibpath="$compile_shlibpath$absdir:";;
++	      case :$finalize_shlibpath: in
++	      *":$libdir:"*) ;;
++	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ 	      esac
+-	      compile_command="$compile_command -l$name"
+-	      deplibs="$deplibs -l$name"
++	      add="-l$name"
++	    elif test "$hardcode_automatic" = yes; then
++	      if test -n "$inst_prefix_dir" &&
++		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
++	        add="$inst_prefix_dir$libdir/$linklib"
++	      else
++	        add="$libdir/$linklib"
++	      fi
+ 	    else
+-	      lib_linked=no
++	      # We cannot seem to hardcode it, guess we'll fake it.
++	      add_dir="-L$libdir"
++	      # Try looking first in the location we're being installed to.
++	      if test -n "$inst_prefix_dir"; then
++		case $libdir in
++		  [\\/]*)
++		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
++		    ;;
++		esac
++	      fi
++	      add="-l$name"
+ 	    fi
+-	    ;;
+-
+-	  *)
+-	    lib_linked=no
+-	    ;;
+-	  esac
+-
+-	  if test "$lib_linked" != yes; then
+-	    $echo "$modename: configuration error: unsupported hardcode properties"
+-	    exit 1
+-	  fi
+ 
+-	  # Finalize command for both is simple: just hardcode it.
+-	  if test "$hardcode_direct" = yes; then
+-	    finalize_command="$finalize_command $libdir/$linklib"
+-	  elif test "$hardcode_minus_L" = yes; then
+-	    case "$finalize_command " in
+-	    *" -L$libdir "*) ;;
+-	    *) finalize_command="$finalize_command -L$libdir";;
+-	    esac
+-	    finalize_command="$finalize_command -l$name"
+-	  elif test "$hardcode_shlibpath_var" = yes; then
+-	    case ":$finalize_shlibpath:" in
+-	    *":$libdir:"*) ;;
+-	    *) finalize_shlibpath="$finalize_shlibpath$libdir:";;
+-	    esac
+-	    finalize_command="$finalize_command -l$name"
+-	  else
+-	    # We cannot seem to hardcode it, guess we'll fake it.
+-	    case "$finalize_command " in
+-	    *" -L$dir "*) ;;
+-	    *) finalize_command="$finalize_command -L$libdir";;
+-	    esac
+-	    finalize_command="$finalize_command -l$name"
+-	  fi
+-	else
+-	  # Transform directly to old archives if we don't build new libraries.
+-	  if test -n "$pic_flag" && test -z "$old_library"; then
+-	    $echo "$modename: cannot find static library for \`$arg'" 1>&2
+-	    exit 1
++	    if test "$linkmode" = prog; then
++	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
++	    else
++	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
++	      test -n "$add" && deplibs="$add $deplibs"
++	    fi
+ 	  fi
+-
++	elif test "$linkmode" = prog; then
+ 	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+ 	  # is not unsupported.  This is valid on all known static and
+ 	  # shared platforms.
+ 	  if test "$hardcode_direct" != unsupported; then
+ 	    test -n "$old_library" && linklib="$old_library"
+-	    compile_command="$compile_command $dir/$linklib"
+-	    finalize_command="$finalize_command $dir/$linklib"
++	    compile_deplibs="$dir/$linklib $compile_deplibs"
++	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ 	  else
+-	    case "$compile_command " in
+-	    *" -L$dir "*) ;;
+-	    *) compile_command="$compile_command -L$dir";;
+-	    esac
+-	    compile_command="$compile_command -l$name"
+-	    case "$finalize_command " in
+-	    *" -L$dir "*) ;;
+-	    *) finalize_command="$finalize_command -L$dir";;
+-	    esac
+-	    finalize_command="$finalize_command -l$name"
++	    compile_deplibs="-l$name -L$dir $compile_deplibs"
++	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ 	  fi
+-	fi
++	elif test "$build_libtool_libs" = yes; then
++	  # Not a shared library
++	  if test "$deplibs_check_method" != pass_all; then
++	    # We're trying link a shared library against a static one
++	    # but the system doesn't support it.
++
++	    # Just print a warning and add the library to dependency_libs so
++	    # that the program can be linked against the static library.
++	    $echo
++	    $echo "*** Warning: This system can not link to static lib archive $lib."
++	    $echo "*** I have the capability to make that library automatically link in when"
++	    $echo "*** you link to this library.  But I can only do this if you have a"
++	    $echo "*** shared version of the library, which you do not appear to have."
++	    if test "$module" = yes; then
++	      $echo "*** But as you try to build a module library, libtool will still create "
++	      $echo "*** a static module, that should work as long as the dlopening application"
++	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
++	      if test -z "$global_symbol_pipe"; then
++		$echo
++		$echo "*** However, this would only work if libtool was able to extract symbol"
++		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++		$echo "*** not find such a program.  So, this module is probably useless."
++		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	      fi
++	      if test "$build_old_libs" = no; then
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
++	  else
++	    deplibs="$dir/$old_library $deplibs"
++	    link_static=yes
++	  fi
++	fi # link shared/static library?
+ 
+-	# Add in any libraries that this one depends upon.
+-	compile_command="$compile_command$dependency_libs"
+-	finalize_command="$finalize_command$dependency_libs"
+-	continue
+-	;;
++	if test "$linkmode" = lib; then
++	  if test -n "$dependency_libs" &&
++	     { test "$hardcode_into_libs" != yes ||
++	       test "$build_old_libs" = yes ||
++	       test "$link_static" = yes; }; then
++	    # Extract -R from dependency_libs
++	    temp_deplibs=
++	    for libdir in $dependency_libs; do
++	      case $libdir in
++	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
++		   case " $xrpath " in
++		   *" $temp_xrpath "*) ;;
++		   *) xrpath="$xrpath $temp_xrpath";;
++		   esac;;
++	      *) temp_deplibs="$temp_deplibs $libdir";;
++	      esac
++	    done
++	    dependency_libs="$temp_deplibs"
++	  fi
+ 
+-      # Some other compiler argument.
+-      *)
+-	# Unknown arguments in both finalize_command and compile_command need
+-	# to be aesthetically quoted because they are evaled later.
+-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-	case "$arg" in
+-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
+-	  arg="\"$arg\""
+-	  ;;
+-	esac
+-	;;
+-      esac
++	  newlib_search_path="$newlib_search_path $absdir"
++	  # Link against this library
++	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++	  # ... and its dependency_libs
++	  tmp_libs=
++	  for deplib in $dependency_libs; do
++	    newdependency_libs="$deplib $newdependency_libs"
++	    if test "X$duplicate_deps" = "Xyes" ; then
++	      case "$tmp_libs " in
++	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++	      esac
++	    fi
++	    tmp_libs="$tmp_libs $deplib"
++	  done
+ 
+-      # Now actually substitute the argument into the commands.
+-      if test -n "$arg"; then
+-	compile_command="$compile_command $arg"
+-	finalize_command="$finalize_command $arg"
++	  if test "$link_all_deplibs" != no; then
++	    # Add the search paths of all dependency libraries
++	    for deplib in $dependency_libs; do
++	      case $deplib in
++	      -L*) path="$deplib" ;;
++	      *.la)
++		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
++		test "X$dir" = "X$deplib" && dir="."
++		# We need an absolute path.
++		case $dir in
++		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++		*)
++		  absdir=`cd "$dir" && pwd`
++		  if test -z "$absdir"; then
++		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
++		    absdir="$dir"
++		  fi
++		  ;;
++		esac
++		if grep "^installed=no" $deplib > /dev/null; then
++		  path="$absdir/$objdir"
++		else
++		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		  if test -z "$libdir"; then
++		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++		    exit $EXIT_FAILURE
++		  fi
++		  if test "$absdir" != "$libdir"; then
++		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
++		  fi
++		  path="$absdir"
++		fi
++		depdepl=
++		case $host in
++		*-*-darwin*)
++		  # we do not want to link against static libs,
++		  # but need to link against shared
++		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
++		  if test -n "$deplibrary_names" ; then
++		    for tmp in $deplibrary_names ; do
++		      depdepl=$tmp
++		    done
++		    if test -f "$path/$depdepl" ; then
++		      depdepl="$path/$depdepl"
++		    fi
++		    # do not add paths which are already there
++		    case " $newlib_search_path " in
++		    *" $path "*) ;;
++		    *) newlib_search_path="$newlib_search_path $path";;
++		    esac
++		  fi
++		  path=""
++		  ;;
++		*)
++		  path="-L$path"
++		  ;;
++		esac
++		;;
++	      -l*)
++		case $host in
++		*-*-darwin*)
++		  # Again, we only want to link against shared libraries
++		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
++		  for tmp in $newlib_search_path ; do
++		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
++		      eval depdepl="$tmp/lib$tmp_libs.dylib"
++		      break
++		    fi
++		  done
++		  path=""
++		  ;;
++		*) continue ;;
++		esac
++		;;
++	      *) continue ;;
++	      esac
++	      case " $deplibs " in
++	      *" $path "*) ;;
++	      *) deplibs="$path $deplibs" ;;
++	      esac
++	      case " $deplibs " in
++	      *" $depdepl "*) ;;
++	      *) deplibs="$depdepl $deplibs" ;;
++	      esac
++	    done
++	  fi # link_all_deplibs != no
++	fi # linkmode = lib
++      done # for deplib in $libs
++      dependency_libs="$newdependency_libs"
++      if test "$pass" = dlpreopen; then
++	# Link the dlpreopened libraries before other libraries
++	for deplib in $save_deplibs; do
++	  deplibs="$deplib $deplibs"
++	done
+       fi
+-    done
+-
+-    if test -n "$prev"; then
+-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-    fi
+-
+-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+-      eval arg=\"$export_dynamic_flag_spec\"
+-      compile_command="$compile_command $arg"
+-      finalize_command="$finalize_command $arg"
+-    fi
+-
+-    oldlibs=
+-    # calculate the name of the file, without its directory
+-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+-    libobjs_save="$libobjs"
+-
+-    case "$output" in
+-    "")
+-      $echo "$modename: you must specify an output file" 1>&2
+-      $echo "$help" 1>&2
+-      exit 1
+-      ;;
++      if test "$pass" != dlopen; then
++	if test "$pass" != conv; then
++	  # Make sure lib_search_path contains only unique directories.
++	  lib_search_path=
++	  for dir in $newlib_search_path; do
++	    case "$lib_search_path " in
++	    *" $dir "*) ;;
++	    *) lib_search_path="$lib_search_path $dir" ;;
++	    esac
++	  done
++	  newlib_search_path=
++	fi
+ 
+-    *.a | *.lib)
+-      if test -n "$link_against_libtool_libs"; then
+-	$echo "$modename: error: cannot link libtool libraries into archives" 1>&2
+-	exit 1
++	if test "$linkmode,$pass" != "prog,link"; then
++	  vars="deplibs"
++	else
++	  vars="compile_deplibs finalize_deplibs"
++	fi
++	for var in $vars dependency_libs; do
++	  # Add libraries to $var in reverse order
++	  eval tmp_libs=\"\$$var\"
++	  new_libs=
++	  for deplib in $tmp_libs; do
++	    # FIXME: Pedantically, this is the right thing to do, so
++	    #        that some nasty dependency loop isn't accidentally
++	    #        broken:
++	    #new_libs="$deplib $new_libs"
++	    # Pragmatically, this seems to cause very few problems in
++	    # practice:
++	    case $deplib in
++	    -L*) new_libs="$deplib $new_libs" ;;
++	    -R*) ;;
++	    *)
++	      # And here is the reason: when a library appears more
++	      # than once as an explicit dependence of a library, or
++	      # is implicitly linked in more than once by the
++	      # compiler, it is considered special, and multiple
++	      # occurrences thereof are not removed.  Compare this
++	      # with having the same library being listed as a
++	      # dependency of multiple other libraries: in this case,
++	      # we know (pedantically, we assume) the library does not
++	      # need to be listed more than once, so we keep only the
++	      # last copy.  This is not always right, but it is rare
++	      # enough that we require users that really mean to play
++	      # such unportable linking tricks to link the library
++	      # using -Wl,-lname, so that libtool does not consider it
++	      # for duplicate removal.
++	      case " $specialdeplibs " in
++	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
++	      *)
++		case " $new_libs " in
++		*" $deplib "*) ;;
++		*) new_libs="$deplib $new_libs" ;;
++		esac
++		;;
++	      esac
++	      ;;
++	    esac
++	  done
++	  tmp_libs=
++	  for deplib in $new_libs; do
++	    case $deplib in
++	    -L*)
++	      case " $tmp_libs " in
++	      *" $deplib "*) ;;
++	      *) tmp_libs="$tmp_libs $deplib" ;;
++	      esac
++	      ;;
++	    *) tmp_libs="$tmp_libs $deplib" ;;
++	    esac
++	  done
++	  eval $var=\"$tmp_libs\"
++	done # for var
+       fi
++      # Last step: remove runtime libs from dependency_libs
++      # (they stay in deplibs)
++      tmp_libs=
++      for i in $dependency_libs ; do
++	case " $predeps $postdeps $compiler_lib_search_path " in
++	*" $i "*)
++	  i=""
++	  ;;
++	esac
++	if test -n "$i" ; then
++	  tmp_libs="$tmp_libs $i"
++	fi
++      done
++      dependency_libs=$tmp_libs
++    done # for pass
++    if test "$linkmode" = prog; then
++      dlfiles="$newdlfiles"
++      dlprefiles="$newdlprefiles"
++    fi
+ 
++    case $linkmode in
++    oldlib)
+       if test -n "$deplibs"; then
+ 	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
+       fi
+@@ -1552,7 +3076,7 @@ compiler."
+       fi
+ 
+       if test -n "$vinfo"; then
+-	$echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
++	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+       fi
+ 
+       if test -n "$release"; then
+@@ -1566,24 +3090,27 @@ compiler."
+       # Now set the variables for building old libraries.
+       build_libtool_libs=no
+       oldlibs="$output"
++      objs="$objs$old_deplibs"
+       ;;
+ 
+-    *.la)
++    lib)
+       # Make sure we only generate libraries of the form `libNAME.la'.
+-      case "$outputname" in
++      case $outputname in
+       lib*)
+ 	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++	eval shared_ext=\"$shrext_cmds\"
+ 	eval libname=\"$libname_spec\"
+ 	;;
+       *)
+ 	if test "$module" = no; then
+ 	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+ 	  $echo "$help" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 	if test "$need_lib_prefix" != no; then
+ 	  # Add the "lib" prefix for modules if required
+ 	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++	  eval shared_ext=\"$shrext_cmds\"
+ 	  eval libname=\"$libname_spec\"
+ 	else
+ 	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+@@ -1591,30 +3118,24 @@ compiler."
+ 	;;
+       esac
+ 
+-      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+-      if test "X$output_objdir" = "X$output"; then
+-	output_objdir="$objdir"
+-      else
+-	output_objdir="$output_objdir/$objdir"
+-      fi
+-
+       if test -n "$objs"; then
+-	$echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1
+-	exit 1
+-      fi
+-
+-      # How the heck are we supposed to write a wrapper for a shared library?
+-      if test -n "$link_against_libtool_libs"; then
+-	 $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2
+-	 exit 1
++	if test "$deplibs_check_method" != pass_all; then
++	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
++	  exit $EXIT_FAILURE
++	else
++	  $echo
++	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
++	  $echo "*** objects $objs is not portable!"
++	  libobjs="$libobjs $objs"
++	fi
+       fi
+ 
+-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+-	$echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2
++      if test "$dlself" != no; then
++	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+       fi
+ 
+       set dummy $rpath
+-      if test $# -gt 2; then
++      if test "$#" -gt 2; then
+ 	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+       fi
+       install_libdir="$2"
+@@ -1623,15 +3144,16 @@ compiler."
+       if test -z "$rpath"; then
+ 	if test "$build_libtool_libs" = yes; then
+ 	  # Building a libtool convenience library.
+-	  libext=al
++	  # Some compilers have problems with a `.al' extension so
++	  # convenience libraries should have the same extension an
++	  # archive normally would.
+ 	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ 	  build_libtool_libs=convenience
+ 	  build_old_libs=yes
+ 	fi
+-	dependency_libs="$deplibs"
+ 
+ 	if test -n "$vinfo"; then
+-	  $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
++	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+ 	fi
+ 
+ 	if test -n "$release"; then
+@@ -1640,73 +3162,143 @@ compiler."
+       else
+ 
+ 	# Parse the version information argument.
+-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS=':'
++	save_ifs="$IFS"; IFS=':'
+ 	set dummy $vinfo 0 0 0
+ 	IFS="$save_ifs"
+ 
+ 	if test -n "$8"; then
+ 	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+ 	  $echo "$help" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 
+-	current="$2"
+-	revision="$3"
+-	age="$4"
++	# convert absolute version numbers to libtool ages
++	# this retains compatibility with .la files and attempts
++	# to make the code below a bit more comprehensible
++
++	case $vinfo_number in
++	yes)
++	  number_major="$2"
++	  number_minor="$3"
++	  number_revision="$4"
++	  #
++	  # There are really only two kinds -- those that
++	  # use the current revision as the major version
++	  # and those that subtract age and use age as
++	  # a minor version.  But, then there is irix
++	  # which has an extra 1 added just for fun
++	  #
++	  case $version_type in
++	  darwin|linux|osf|windows)
++	    current=`expr $number_major + $number_minor`
++	    age="$number_minor"
++	    revision="$number_revision"
++	    ;;
++	  freebsd-aout|freebsd-elf|sunos)
++	    current="$number_major"
++	    revision="$number_minor"
++	    age="0"
++	    ;;
++	  irix|nonstopux)
++	    current=`expr $number_major + $number_minor - 1`
++	    age="$number_minor"
++	    revision="$number_minor"
++	    ;;
++	  *)
++	    $echo "$modename: unknown library version type \`$version_type'" 1>&2
++	    $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
++	    exit $EXIT_FAILURE
++	    ;;
++	  esac
++	  ;;
++	no)
++	  current="$2"
++	  revision="$3"
++	  age="$4"
++	  ;;
++	esac
+ 
+ 	# Check that each of the things are valid numbers.
+-	case "$current" in
+-	0 | [1-9] | [1-9][0-9]*) ;;
++	case $current in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ 	*)
+-	  $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
++	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+ 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+ 
+-	case "$revision" in
+-	0 | [1-9] | [1-9][0-9]*) ;;
++	case $revision in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ 	*)
+-	  $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
++	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+ 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+ 
+-	case "$age" in
+-	0 | [1-9] | [1-9][0-9]*) ;;
++	case $age in
++	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ 	*)
+-	  $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
++	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+ 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+ 
+-	if test $age -gt $current; then
++	if test "$age" -gt "$current"; then
+ 	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+ 	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 
+ 	# Calculate the version variables.
+ 	major=
+ 	versuffix=
+ 	verstring=
+-	case "$version_type" in
++	case $version_type in
+ 	none) ;;
+ 
+-	irix)
++	darwin)
++	  # Like Linux, but with the current version available in
++	  # verstring for coding it into the library header
++	  major=.`expr $current - $age`
++	  versuffix="$major.$age.$revision"
++	  # Darwin ld doesn't like 0 for these options...
++	  minor_current=`expr $current + 1`
++	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
++	  ;;
++
++	freebsd-aout)
++	  major=".$current"
++	  versuffix=".$current.$revision";
++	  ;;
++
++	freebsd-elf)
++	  major=".$current"
++	  versuffix=".$current";
++	  ;;
++
++	irix | nonstopux)
+ 	  major=`expr $current - $age + 1`
+-	  versuffix="$major.$revision"
+-	  verstring="sgi$major.$revision"
++
++	  case $version_type in
++	    nonstopux) verstring_prefix=nonstopux ;;
++	    *)         verstring_prefix=sgi ;;
++	  esac
++	  verstring="$verstring_prefix$major.$revision"
+ 
+ 	  # Add in all the interfaces that we are compatible with.
+ 	  loop=$revision
+-	  while test $loop != 0; do
++	  while test "$loop" -ne 0; do
+ 	    iface=`expr $revision - $loop`
+ 	    loop=`expr $loop - 1`
+-	    verstring="sgi$major.$iface:$verstring"
++	    verstring="$verstring_prefix$major.$iface:$verstring"
+ 	  done
++
++	  # Before this point, $major must not contain `.'.
++	  major=.$major
++	  versuffix="$major.$revision"
+ 	  ;;
+ 
+ 	linux)
+@@ -1715,55 +3307,54 @@ compiler."
+ 	  ;;
+ 
+ 	osf)
+-	  major=`expr $current - $age`
++	  major=.`expr $current - $age`
+ 	  versuffix=".$current.$age.$revision"
+ 	  verstring="$current.$age.$revision"
+ 
+ 	  # Add in all the interfaces that we are compatible with.
+ 	  loop=$age
+-	  while test $loop != 0; do
++	  while test "$loop" -ne 0; do
+ 	    iface=`expr $current - $loop`
+ 	    loop=`expr $loop - 1`
+ 	    verstring="$verstring:${iface}.0"
+ 	  done
+ 
+-	  # Make executables depend on our current version.
+-	  verstring="$verstring:${current}.0"
+-	  ;;
+-
+-	sunos)
+-	  major=".$current"
+-	  versuffix=".$current.$revision"
+-	  ;;
+-
+-	freebsd-aout)
+-	  major=".$current"
+-	  versuffix=".$current.$revision";
++	  # Make executables depend on our current version.
++	  verstring="$verstring:${current}.0"
+ 	  ;;
+ 
+-	freebsd-elf)
++	sunos)
+ 	  major=".$current"
+-	  versuffix=".$current";
++	  versuffix=".$current.$revision"
+ 	  ;;
+ 
+ 	windows)
+-	  # Like Linux, but with '-' rather than '.', since we only
+-	  # want one extension on Windows 95.
++	  # Use '-' rather than '.', since we only want one
++	  # extension on DOS 8.3 filesystems.
+ 	  major=`expr $current - $age`
+-	  versuffix="-$major-$age-$revision"
++	  versuffix="-$major"
+ 	  ;;
+ 
+ 	*)
+ 	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+-	  echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+-	  exit 1
++	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+ 
+ 	# Clear the version info if we defaulted, and they specified a release.
+ 	if test -z "$vinfo" && test -n "$release"; then
+ 	  major=
+-	  verstring="0.0"
++	  case $version_type in
++	  darwin)
++	    # we can't check for "0.0" in archive_cmds due to quoting
++	    # problems, so we reset it completely
++	    verstring=
++	    ;;
++	  *)
++	    verstring="0.0"
++	    ;;
++	  esac
+ 	  if test "$need_version" = no; then
+ 	    versuffix=
+ 	  else
+@@ -1777,7 +3368,7 @@ compiler."
+ 	  versuffix=
+ 	  verstring=""
+ 	fi
+-	
++
+ 	# Check to see if the archive will have undefined symbols.
+ 	if test "$allow_undefined" = yes; then
+ 	  if test "$allow_undefined_flag" = unsupported; then
+@@ -1789,33 +3380,32 @@ compiler."
+ 	  # Don't allow undefined symbols.
+ 	  allow_undefined_flag="$no_undefined_flag"
+ 	fi
+-
+-	dependency_libs="$deplibs"
+-	case "$host" in
+-	*-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos* | *-*-freebsd* )
+-	  # these systems don't actually have a c library (as such)!
+-	  ;;
+-        *-*-rhapsody*)
+-	  # rhapsody is a little odd...
+-	  deplibs="$deplibs -framework System"
+-	  ;;
+-	*)
+-	  # Add libc to deplibs on all other systems.
+-	  deplibs="$deplibs -lc"
+-	  ;;
+-	esac
+       fi
+ 
+-      # Create the output directory, or remove our outputs if we need to.
+-      if test -d $output_objdir; then
+-	$show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
+-	$run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
+-      else
+-	$show "$mkdir $output_objdir"
+-	$run $mkdir $output_objdir
+-	status=$?
+-	if test $status -ne 0 && test ! -d $output_objdir; then
+-	  exit $status
++      if test "$mode" != relink; then
++	# Remove our outputs, but don't remove object files since they
++	# may have been created when compiling PIC objects.
++	removelist=
++	tempremovelist=`$echo "$output_objdir/*"`
++	for p in $tempremovelist; do
++	  case $p in
++	    *.$objext)
++	       ;;
++	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
++	       if test "X$precious_files_regex" != "X"; then
++	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
++	         then
++		   continue
++		 fi
++	       fi
++	       removelist="$removelist $p"
++	       ;;
++	    *) ;;
++	  esac
++	done
++	if test -n "$removelist"; then
++	  $show "${rm}r $removelist"
++	  $run ${rm}r $removelist
+ 	fi
+       fi
+ 
+@@ -1827,7 +3417,79 @@ compiler."
+ 	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+       fi
+ 
++      # Eliminate all temporary directories.
++      for path in $notinst_path; do
++	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
++	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
++	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
++      done
++
++      if test -n "$xrpath"; then
++	# If the user specified any rpath flags, then add them.
++	temp_xrpath=
++	for libdir in $xrpath; do
++	  temp_xrpath="$temp_xrpath -R$libdir"
++	  case "$finalize_rpath " in
++	  *" $libdir "*) ;;
++	  *) finalize_rpath="$finalize_rpath $libdir" ;;
++	  esac
++	done
++	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
++	  dependency_libs="$temp_xrpath $dependency_libs"
++	fi
++      fi
++
++      # Make sure dlfiles contains only unique files that won't be dlpreopened
++      old_dlfiles="$dlfiles"
++      dlfiles=
++      for lib in $old_dlfiles; do
++	case " $dlprefiles $dlfiles " in
++	*" $lib "*) ;;
++	*) dlfiles="$dlfiles $lib" ;;
++	esac
++      done
++
++      # Make sure dlprefiles contains only unique files
++      old_dlprefiles="$dlprefiles"
++      dlprefiles=
++      for lib in $old_dlprefiles; do
++	case "$dlprefiles " in
++	*" $lib "*) ;;
++	*) dlprefiles="$dlprefiles $lib" ;;
++	esac
++      done
++
+       if test "$build_libtool_libs" = yes; then
++	if test -n "$rpath"; then
++	  case $host in
++	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
++	    # these systems don't actually have a c library (as such)!
++	    ;;
++	  *-*-rhapsody* | *-*-darwin1.[012])
++	    # Rhapsody C library is in the System framework
++	    deplibs="$deplibs -framework System"
++	    ;;
++	  *-*-netbsd*)
++	    # Don't link with libc until the a.out ld.so is fixed.
++	    ;;
++	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
++	    # Do not include libc due to us having libc/libc_r.
++	    ;;
++	  *-*-sco3.2v5* | *-*-sco5v6*)
++	    # Causes problems with __ctype
++	    ;;
++	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
++	    # Compiler inserts libc in the correct place for threads to work
++	    ;;
++ 	  *)
++	    # Add libc to deplibs on all other systems if necessary.
++	    if test "$build_libtool_need_lc" = "yes"; then
++	      deplibs="$deplibs -lc"
++	    fi
++	    ;;
++	  esac
++	fi
++
+ 	# Transform deplibs into only deplibs that can be linked in shared.
+ 	name_save=$name
+ 	libname_save=$libname
+@@ -1842,13 +3504,13 @@ compiler."
+ 	major=""
+ 	newdeplibs=
+ 	droppeddeps=no
+-	case "$deplibs_check_method" in
++	case $deplibs_check_method in
+ 	pass_all)
+ 	  # Don't check for shared/static.  Everything works.
+ 	  # This might be a little naive.  We might want to check
+ 	  # whether the library exists or not.  But this is on
+ 	  # osf3 & osf4 and I'm not really sure... Just
+-	  # implementing what was already the behaviour.
++	  # implementing what was already the behavior.
+ 	  newdeplibs=$deplibs
+ 	  ;;
+ 	test_compile)
+@@ -1861,64 +3523,88 @@ compiler."
+ 	  int main() { return 0; }
+ EOF
+ 	  $rm conftest
+-	  $CC -o conftest conftest.c $deplibs
+-	  if test $? -eq 0 ; then
++	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
++	  if test "$?" -eq 0 ; then
+ 	    ldd_output=`ldd conftest`
+ 	    for i in $deplibs; do
+-	      name="`expr $i : '-l\(.*\)'`"
++	      name=`expr $i : '-l\(.*\)'`
+ 	      # If $name is empty we are operating on a -L argument.
+-	      if test "$name" != "" ; then
+-		libname=`eval \\$echo \"$libname_spec\"`
+-		deplib_matches=`eval \\$echo \"$library_names_spec\"`
+-		set dummy $deplib_matches
+-		deplib_match=$2
+-		if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		  newdeplibs="$newdeplibs $i"
+-		else
+-		  droppeddeps=yes
+-		  echo
+-		  echo "*** Warning: This library needs some functionality provided by $i."
+-		  echo "*** I have the capability to make that library automatically link in when"
+-		  echo "*** you link to this library.  But I can only do this if you have a"
+-		  echo "*** shared version of the library, which you do not appear to have."
++              if test "$name" != "" && test "$name" -ne "0"; then
++		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		  case " $predeps $postdeps " in
++		  *" $i "*)
++		    newdeplibs="$newdeplibs $i"
++		    i=""
++		    ;;
++		  esac
++	        fi
++		if test -n "$i" ; then
++		  libname=`eval \\$echo \"$libname_spec\"`
++		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
++		  set dummy $deplib_matches
++		  deplib_match=$2
++		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		    newdeplibs="$newdeplibs $i"
++		  else
++		    droppeddeps=yes
++		    $echo
++		    $echo "*** Warning: dynamic linker does not accept needed library $i."
++		    $echo "*** I have the capability to make that library automatically link in when"
++		    $echo "*** you link to this library.  But I can only do this if you have a"
++		    $echo "*** shared version of the library, which I believe you do not have"
++		    $echo "*** because a test_compile did reveal that the linker did not use it for"
++		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
++		  fi
+ 		fi
+ 	      else
+ 		newdeplibs="$newdeplibs $i"
+ 	      fi
+ 	    done
+ 	  else
+-	    # Error occured in the first compile.  Let's try to salvage the situation:
+-	    # Compile a seperate program for each library.
++	    # Error occurred in the first compile.  Let's try to salvage
++	    # the situation: Compile a separate program for each library.
+ 	    for i in $deplibs; do
+-	      name="`expr $i : '-l\(.*\)'`"
+-	     # If $name is empty we are operating on a -L argument.
+-	      if test "$name" != "" ; then
++	      name=`expr $i : '-l\(.*\)'`
++	      # If $name is empty we are operating on a -L argument.
++              if test "$name" != "" && test "$name" != "0"; then
+ 		$rm conftest
+-		$CC -o conftest conftest.c $i
++		$LTCC $LTCFLAGS -o conftest conftest.c $i
+ 		# Did it work?
+-		if test $? -eq 0 ; then
++		if test "$?" -eq 0 ; then
+ 		  ldd_output=`ldd conftest`
+-		  libname=`eval \\$echo \"$libname_spec\"`
+-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+-		  set dummy $deplib_matches
+-		  deplib_match=$2
+-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+-		    newdeplibs="$newdeplibs $i"
+-		  else
+-		    droppeddeps=yes
+-		    echo
+-		    echo "*** Warning: This library needs some functionality provided by $i."
+-		    echo "*** I have the capability to make that library automatically link in when"
+-		    echo "*** you link to this library.  But I can only do this if you have a"
+-		    echo "*** shared version of the library, which you do not appear to have."
++		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		    case " $predeps $postdeps " in
++		    *" $i "*)
++		      newdeplibs="$newdeplibs $i"
++		      i=""
++		      ;;
++		    esac
++		  fi
++		  if test -n "$i" ; then
++		    libname=`eval \\$echo \"$libname_spec\"`
++		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
++		    set dummy $deplib_matches
++		    deplib_match=$2
++		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++		      newdeplibs="$newdeplibs $i"
++		    else
++		      droppeddeps=yes
++		      $echo
++		      $echo "*** Warning: dynamic linker does not accept needed library $i."
++		      $echo "*** I have the capability to make that library automatically link in when"
++		      $echo "*** you link to this library.  But I can only do this if you have a"
++		      $echo "*** shared version of the library, which you do not appear to have"
++		      $echo "*** because a test_compile did reveal that the linker did not use this one"
++		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
++		    fi
+ 		  fi
+ 		else
+ 		  droppeddeps=yes
+-		  echo
+-		  echo "*** Warning!  Library $i is needed by this library but I was not able to"
+-		  echo "***  make it link in!  You will probably need to install it or some"
+-		  echo "*** library that it depends on before this library will be fully"
+-		  echo "*** functional.  Installing it before continuing would be even better."
++		  $echo
++		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
++		  $echo "***  make it link in!  You will probably need to install it or some"
++		  $echo "*** library that it depends on before this library will be fully"
++		  $echo "*** functional.  Installing it before continuing would be even better."
+ 		fi
+ 	      else
+ 		newdeplibs="$newdeplibs $i"
+@@ -1928,19 +3614,28 @@ EOF
+ 	  ;;
+ 	file_magic*)
+ 	  set dummy $deplibs_check_method
+-	  file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`"
++	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ 	  for a_deplib in $deplibs; do
+-	    name="`expr $a_deplib : '-l\(.*\)'`"
++	    name=`expr $a_deplib : '-l\(.*\)'`
+ 	    # If $name is empty we are operating on a -L argument.
+-	    if test "$name" != "" ; then
+-	      libname=`eval \\$echo \"$libname_spec\"`
+-	      for i in $lib_search_path; do
+-		    potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+-		    for potent_lib in $potential_libs; do
++            if test "$name" != "" && test  "$name" != "0"; then
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  newdeplibs="$newdeplibs $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
++	      fi
++	      if test -n "$a_deplib" ; then
++		libname=`eval \\$echo \"$libname_spec\"`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  for potent_lib in $potential_libs; do
+ 		      # Follow soft links.
+ 		      if ls -lLd "$potent_lib" 2>/dev/null \
+ 			 | grep " -> " >/dev/null; then
+-			continue 
++			continue
+ 		      fi
+ 		      # The statement above tries to avoid entering an
+ 		      # endless loop below, in case of cyclic links.
+@@ -1949,28 +3644,88 @@ EOF
+ 		      # but so what?
+ 		      potlib="$potent_lib"
+ 		      while test -h "$potlib" 2>/dev/null; do
+-			potliblink=`ls -ld $potlib | sed 's/.* -> //'`
+-			case "$potliblink" in
++			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
++			case $potliblink in
+ 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ 			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ 			esac
+ 		      done
+ 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+-			 | sed 10q \
+-			 | egrep "$file_magic_regex" > /dev/null; then
++			 | ${SED} 10q \
++			 | $EGREP "$file_magic_regex" > /dev/null; then
+ 			newdeplibs="$newdeplibs $a_deplib"
+ 			a_deplib=""
+ 			break 2
+ 		      fi
+-		    done
+-	      done
++		  done
++		done
++	      fi
++	      if test -n "$a_deplib" ; then
++		droppeddeps=yes
++		$echo
++		$echo "*** Warning: linker path does not have real file for library $a_deplib."
++		$echo "*** I have the capability to make that library automatically link in when"
++		$echo "*** you link to this library.  But I can only do this if you have a"
++		$echo "*** shared version of the library, which you do not appear to have"
++		$echo "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
++		else
++		  $echo "*** with $libname and none of the candidates passed a file format test"
++		  $echo "*** using a file magic. Last file checked: $potlib"
++		fi
++	      fi
++	    else
++	      # Add a -L argument.
++	      newdeplibs="$newdeplibs $a_deplib"
++	    fi
++	  done # Gone through all deplibs.
++	  ;;
++	match_pattern*)
++	  set dummy $deplibs_check_method
++	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++	  for a_deplib in $deplibs; do
++	    name=`expr $a_deplib : '-l\(.*\)'`
++	    # If $name is empty we are operating on a -L argument.
++	    if test -n "$name" && test "$name" != "0"; then
++	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++		case " $predeps $postdeps " in
++		*" $a_deplib "*)
++		  newdeplibs="$newdeplibs $a_deplib"
++		  a_deplib=""
++		  ;;
++		esac
++	      fi
++	      if test -n "$a_deplib" ; then
++		libname=`eval \\$echo \"$libname_spec\"`
++		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++		  for potent_lib in $potential_libs; do
++		    potlib="$potent_lib" # see symlink-check above in file_magic test
++		    if eval $echo \"$potent_lib\" 2>/dev/null \
++		        | ${SED} 10q \
++		        | $EGREP "$match_pattern_regex" > /dev/null; then
++		      newdeplibs="$newdeplibs $a_deplib"
++		      a_deplib=""
++		      break 2
++		    fi
++		  done
++		done
++	      fi
+ 	      if test -n "$a_deplib" ; then
+ 		droppeddeps=yes
+-		echo
+-		echo "*** Warning: This library needs some functionality provided by $a_deplib."
+-		echo "*** I have the capability to make that library automatically link in when"
+-		echo "*** you link to this library.  But I can only do this if you have a"
+-		echo "*** shared version of the library, which you do not appear to have."
++		$echo
++		$echo "*** Warning: linker path does not have real file for library $a_deplib."
++		$echo "*** I have the capability to make that library automatically link in when"
++		$echo "*** you link to this library.  But I can only do this if you have a"
++		$echo "*** shared version of the library, which you do not appear to have"
++		$echo "*** because I did check the linker path looking for a file starting"
++		if test -z "$potlib" ; then
++		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
++		else
++		  $echo "*** with $libname and none of the candidates passed a file format test"
++		  $echo "*** using a regex pattern. Last file checked: $potlib"
++		fi
+ 	      fi
+ 	    else
+ 	      # Add a -L argument.
+@@ -1980,16 +3735,23 @@ EOF
+ 	  ;;
+ 	none | unknown | *)
+ 	  newdeplibs=""
+-	  if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+-	       -e 's/ -[LR][^ ]*//g' -e 's/[ 	]//g' |
+-	     grep . >/dev/null; then
+-	    echo
++	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
++	    -e 's/ -[LR][^ ]*//g'`
++	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
++	    for i in $predeps $postdeps ; do
++	      # can't use Xsed below, because $i might contain '/'
++	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
++	    done
++	  fi
++	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
++	    | grep . >/dev/null; then
++	    $echo
+ 	    if test "X$deplibs_check_method" = "Xnone"; then
+-	      echo "*** Warning: inter-library dependencies are not supported in this platform."
++	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+ 	    else
+-	      echo "*** Warning: inter-library dependencies are not known to be supported."
++	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+ 	    fi
+-	    echo "*** All declared inter-library dependencies are being dropped."
++	    $echo "*** All declared inter-library dependencies are being dropped."
+ 	    droppeddeps=yes
+ 	  fi
+ 	  ;;
+@@ -2000,19 +3762,26 @@ EOF
+ 	libname=$libname_save
+ 	name=$name_save
+ 
++	case $host in
++	*-*-rhapsody* | *-*-darwin1.[012])
++	  # On Rhapsody replace the C library is the System framework
++	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
++	  ;;
++	esac
++
+ 	if test "$droppeddeps" = yes; then
+ 	  if test "$module" = yes; then
+-	    echo
+-	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+-	    echo "*** dependencies of module $libname.  Therefore, libtool will create"
+-	    echo "*** a static module, that should work as long as the dlopening"
+-	    echo "*** application is linked with the -dlopen flag."
++	    $echo
++	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
++	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
++	    $echo "*** a static module, that should work as long as the dlopening"
++	    $echo "*** application is linked with the -dlopen flag."
+ 	    if test -z "$global_symbol_pipe"; then
+-	      echo
+-	      echo "*** However, this would only work if libtool was able to extract symbol"
+-	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+-	      echo "*** not find such a program.  So, this module is probably useless."
+-	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
++	      $echo
++	      $echo "*** However, this would only work if libtool was able to extract symbol"
++	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++	      $echo "*** not find such a program.  So, this module is probably useless."
++	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ 	    fi
+ 	    if test "$build_old_libs" = no; then
+ 	      oldlibs="$output_objdir/$libname.$libext"
+@@ -2022,23 +3791,127 @@ EOF
+ 	      build_libtool_libs=no
+ 	    fi
+ 	  else
+-	    echo "*** The inter-library dependencies that have been dropped here will be"
+-	    echo "*** automatically added whenever a program is linked with this library"
+-	    echo "*** or is declared to -dlopen it."
++	    $echo "*** The inter-library dependencies that have been dropped here will be"
++	    $echo "*** automatically added whenever a program is linked with this library"
++	    $echo "*** or is declared to -dlopen it."
++
++	    if test "$allow_undefined" = no; then
++	      $echo
++	      $echo "*** Since this library must not contain undefined symbols,"
++	      $echo "*** because either the platform does not support them or"
++	      $echo "*** it was explicitly requested with -no-undefined,"
++	      $echo "*** libtool will only create a static version of it."
++	      if test "$build_old_libs" = no; then
++		oldlibs="$output_objdir/$libname.$libext"
++		build_libtool_libs=module
++		build_old_libs=yes
++	      else
++		build_libtool_libs=no
++	      fi
++	    fi
+ 	  fi
+ 	fi
+ 	# Done checking deplibs!
+ 	deplibs=$newdeplibs
+       fi
+ 
++
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
++	*)
++	  case " $deplibs " in
++	  *" -L$path/$objdir "*)
++	    new_libs="$new_libs -L$path/$objdir" ;;
++	  esac
++	  ;;
++	esac
++      done
++      for deplib in $deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) new_libs="$new_libs $deplib" ;;
++	  esac
++	  ;;
++	*) new_libs="$new_libs $deplib" ;;
++	esac
++      done
++      deplibs="$new_libs"
++
++
+       # All the library-specific variables (install_libdir is set above).
+       library_names=
+       old_library=
+       dlname=
+-      
++
+       # Test again, we may have decided not to build it any more
+       if test "$build_libtool_libs" = yes; then
++	if test "$hardcode_into_libs" = yes; then
++	  # Hardcode the library paths
++	  hardcode_libdirs=
++	  dep_rpath=
++	  rpath="$finalize_rpath"
++	  test "$mode" != relink && rpath="$compile_rpath$rpath"
++	  for libdir in $rpath; do
++	    if test -n "$hardcode_libdir_flag_spec"; then
++	      if test -n "$hardcode_libdir_separator"; then
++		if test -z "$hardcode_libdirs"; then
++		  hardcode_libdirs="$libdir"
++		else
++		  # Just accumulate the unique libdirs.
++		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++		    ;;
++		  *)
++		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++		    ;;
++		  esac
++		fi
++	      else
++		eval flag=\"$hardcode_libdir_flag_spec\"
++		dep_rpath="$dep_rpath $flag"
++	      fi
++	    elif test -n "$runpath_var"; then
++	      case "$perm_rpath " in
++	      *" $libdir "*) ;;
++	      *) perm_rpath="$perm_rpath $libdir" ;;
++	      esac
++	    fi
++	  done
++	  # Substitute the hardcoded libdirs into the rpath.
++	  if test -n "$hardcode_libdir_separator" &&
++	     test -n "$hardcode_libdirs"; then
++	    libdir="$hardcode_libdirs"
++	    if test -n "$hardcode_libdir_flag_spec_ld"; then
++	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
++	    else
++	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
++	    fi
++	  fi
++	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
++	    # We should set the runpath_var.
++	    rpath=
++	    for dir in $perm_rpath; do
++	      rpath="$rpath$dir:"
++	    done
++	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++	  fi
++	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++	fi
++
++	shlibpath="$finalize_shlibpath"
++	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++	if test -n "$shlibpath"; then
++	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++	fi
++
+ 	# Get the real and link names of the library.
++	eval shared_ext=\"$shrext_cmds\"
+ 	eval library_names=\"$library_names_spec\"
+ 	set dummy $library_names
+ 	realname="$2"
+@@ -2049,30 +3922,17 @@ EOF
+ 	else
+ 	  soname="$realname"
+ 	fi
++	if test -z "$dlname"; then
++	  dlname=$soname
++	fi
+ 
+ 	lib="$output_objdir/$realname"
++	linknames=
+ 	for link
+ 	do
+ 	  linknames="$linknames $link"
+ 	done
+ 
+-	# Ensure that we have .o objects for linkers which dislike .lo
+-	# (e.g. aix) in case we are running --disable-static
+-	for obj in $libobjs; do
+-	  xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+-	  if test "X$xdir" = "X$obj"; then
+-	    xdir="."
+-	  else
+-	    xdir="$xdir"
+-	  fi
+-	  baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+-	  oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+-	  if test ! -f $xdir/$oldobj; then
+-	    $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
+-	    $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
+-	  fi
+-	done
+-
+ 	# Use standard objects if they are pic
+ 	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ 
+@@ -2082,17 +3942,29 @@ EOF
+ 	    $show "generating symbol list for \`$libname.la'"
+ 	    export_symbols="$output_objdir/$libname.exp"
+ 	    $run $rm $export_symbols
+-	    eval cmds=\"$export_symbols_cmds\"
+-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++	    cmds=$export_symbols_cmds
++	    save_ifs="$IFS"; IFS='~'
+ 	    for cmd in $cmds; do
+ 	      IFS="$save_ifs"
+-	      $show "$cmd"
+-	      $run eval "$cmd" || exit $?
++	      eval cmd=\"$cmd\"
++	      if len=`expr "X$cmd" : ".*"` &&
++	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	        $show "$cmd"
++	        $run eval "$cmd" || exit $?
++	        skipped_export=false
++	      else
++	        # The command line is too long to execute in one step.
++	        $show "using reloadable object file for export list..."
++	        skipped_export=:
++		# Break out early, otherwise skipped_export may be
++		# set to false by a later but shorter cmd.
++		break
++	      fi
+ 	    done
+ 	    IFS="$save_ifs"
+ 	    if test -n "$export_symbols_regex"; then
+-	      $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+-	      $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
++	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ 	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+ 	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+ 	    fi
+@@ -2103,65 +3975,212 @@ EOF
+ 	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+ 	fi
+ 
++	tmp_deplibs=
++	for test_deplib in $deplibs; do
++		case " $convenience " in
++		*" $test_deplib "*) ;;
++		*)
++			tmp_deplibs="$tmp_deplibs $test_deplib"
++			;;
++		esac
++	done
++	deplibs="$tmp_deplibs"
++
+ 	if test -n "$convenience"; then
+ 	  if test -n "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
+ 	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ 	  else
+ 	    gentop="$output_objdir/${outputname}x"
+-	    $show "${rm}r $gentop"
+-	    $run ${rm}r "$gentop"
+-	    $show "mkdir $gentop"
+-	    $run mkdir "$gentop"
+-	    status=$?
+-	    if test $status -ne 0 && test ! -d "$gentop"; then
+-	      exit $status
+-	    fi
+ 	    generated="$generated $gentop"
+ 
+-	    for xlib in $convenience; do
+-	      # Extract the objects.
+-	      case "$xlib" in
+-	      [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+-	      *) xabs=`pwd`"/$xlib" ;;
+-	      esac
+-	      xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+-	      xdir="$gentop/$xlib"
+-
+-	      $show "${rm}r $xdir"
+-	      $run ${rm}r "$xdir"
+-	      $show "mkdir $xdir"
+-	      $run mkdir "$xdir"
+-	      status=$?
+-	      if test $status -ne 0 && test ! -d "$xdir"; then
+-		exit $status
+-	      fi
+-	      $show "(cd $xdir && $AR x $xabs)"
+-	      $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+-	      libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+-	    done
++	    func_extract_archives $gentop $convenience
++	    libobjs="$libobjs $func_extract_archives_result"
+ 	  fi
+ 	fi
+-
++	
+ 	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ 	  eval flag=\"$thread_safe_flag_spec\"
+-	  linkopts="$linkopts $flag"
++	  linker_flags="$linker_flags $flag"
++	fi
++
++	# Make a backup of the uninstalled library when relinking
++	if test "$mode" = relink; then
++	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+ 	fi
+ 
+ 	# Do each of the archive commands.
++	if test "$module" = yes && test -n "$module_cmds" ; then
++	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	    eval test_cmds=\"$module_expsym_cmds\"
++	    cmds=$module_expsym_cmds
++	  else
++	    eval test_cmds=\"$module_cmds\"
++	    cmds=$module_cmds
++	  fi
++	else
+ 	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+-	  eval cmds=\"$archive_expsym_cmds\"
++	  eval test_cmds=\"$archive_expsym_cmds\"
++	  cmds=$archive_expsym_cmds
++	else
++	  eval test_cmds=\"$archive_cmds\"
++	  cmds=$archive_cmds
++	  fi
++	fi
++
++	if test "X$skipped_export" != "X:" &&
++	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  :
+ 	else
+-	  eval cmds=\"$archive_cmds\"
++	  # The command line is too long to link in one step, link piecewise.
++	  $echo "creating reloadable object files..."
++
++	  # Save the value of $output and $libobjs because we want to
++	  # use them later.  If we have whole_archive_flag_spec, we
++	  # want to use save_libobjs as it was before
++	  # whole_archive_flag_spec was expanded, because we can't
++	  # assume the linker understands whole_archive_flag_spec.
++	  # This may have to be revisited, in case too many
++	  # convenience libraries get linked in and end up exceeding
++	  # the spec.
++	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
++	    save_libobjs=$libobjs
++	  fi
++	  save_output=$output
++	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
++
++	  # Clear the reloadable object creation command queue and
++	  # initialize k to one.
++	  test_cmds=
++	  concat_cmds=
++	  objlist=
++	  delfiles=
++	  last_robj=
++	  k=1
++	  output=$output_objdir/$output_la-${k}.$objext
++	  # Loop over the list of objects to be linked.
++	  for obj in $save_libobjs
++	  do
++	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
++	    if test "X$objlist" = X ||
++	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++		 test "$len" -le "$max_cmd_len"; }; then
++	      objlist="$objlist $obj"
++	    else
++	      # The command $test_cmds is almost too long, add a
++	      # command to the queue.
++	      if test "$k" -eq 1 ; then
++		# The first file doesn't have a previous command to add.
++		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
++	      else
++		# All subsequent reloadable object files will link in
++		# the last one created.
++		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
++	      fi
++	      last_robj=$output_objdir/$output_la-${k}.$objext
++	      k=`expr $k + 1`
++	      output=$output_objdir/$output_la-${k}.$objext
++	      objlist=$obj
++	      len=1
++	    fi
++	  done
++	  # Handle the remaining objects by creating one last
++	  # reloadable object file.  All subsequent reloadable object
++	  # files will link in the last one created.
++	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
++
++	  if ${skipped_export-false}; then
++	    $show "generating symbol list for \`$libname.la'"
++	    export_symbols="$output_objdir/$libname.exp"
++	    $run $rm $export_symbols
++	    libobjs=$output
++	    # Append the command to create the export file.
++	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
++          fi
++
++	  # Set up a command to remove the reloadable object files
++	  # after they are used.
++	  i=0
++	  while test "$i" -lt "$k"
++	  do
++	    i=`expr $i + 1`
++	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
++	  done
++
++	  $echo "creating a temporary reloadable object file: $output"
++
++	  # Loop through the commands generated above and execute them.
++	  save_ifs="$IFS"; IFS='~'
++	  for cmd in $concat_cmds; do
++	    IFS="$save_ifs"
++	    $show "$cmd"
++	    $run eval "$cmd" || exit $?
++	  done
++	  IFS="$save_ifs"
++
++	  libobjs=$output
++	  # Restore the value of output.
++	  output=$save_output
++
++	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
++	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++	  fi
++	  # Expand the library linking commands again to reset the
++	  # value of $libobjs for piecewise linking.
++
++	  # Do each of the archive commands.
++	  if test "$module" = yes && test -n "$module_cmds" ; then
++	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
++	      cmds=$module_expsym_cmds
++	    else
++	      cmds=$module_cmds
++	    fi
++	  else
++	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++	    cmds=$archive_expsym_cmds
++	  else
++	    cmds=$archive_cmds
++	    fi
++	  fi
++
++	  # Append the command to remove the reloadable object files
++	  # to the just-reset $cmds.
++	  eval cmds=\"\$cmds~\$rm $delfiles\"
+ 	fi
+-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++	save_ifs="$IFS"; IFS='~'
+ 	for cmd in $cmds; do
+ 	  IFS="$save_ifs"
++	  eval cmd=\"$cmd\"
+ 	  $show "$cmd"
+-	  $run eval "$cmd" || exit $?
++	  $run eval "$cmd" || {
++	    lt_exit=$?
++
++	    # Restore the uninstalled library and exit
++	    if test "$mode" = relink; then
++	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
++	    fi
++
++	    exit $lt_exit
++	  }
+ 	done
+ 	IFS="$save_ifs"
+ 
++	# Restore the uninstalled library and exit
++	if test "$mode" = relink; then
++	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
++
++	  if test -n "$convenience"; then
++	    if test -z "$whole_archive_flag_spec"; then
++	      $show "${rm}r $gentop"
++	      $run ${rm}r "$gentop"
++	    fi
++	  fi
++
++	  exit $EXIT_SUCCESS
++	fi
++
+ 	# Create links to the real library.
+ 	for linkname in $linknames; do
+ 	  if test "$realname" != "$linkname"; then
+@@ -2178,12 +4197,7 @@ EOF
+       fi
+       ;;
+ 
+-    *.lo | *.o | *.obj)
+-      if test -n "$link_against_libtool_libs"; then
+-	$echo "$modename: error: cannot link libtool libraries into objects" 1>&2
+-	exit 1
+-      fi
+-
++    obj)
+       if test -n "$deplibs"; then
+ 	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
+       fi
+@@ -2208,11 +4222,11 @@ EOF
+ 	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+       fi
+ 
+-      case "$output" in
++      case $output in
+       *.lo)
+-	if test -n "$objs"; then
++	if test -n "$objs$old_deplibs"; then
+ 	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 	libobj="$output"
+ 	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+@@ -2234,56 +4248,29 @@ EOF
+       gentop=
+       # reload_cmds runs $LD directly, so let us get rid of
+       # -Wl from whole_archive_flag_spec
+-      wl= 
++      wl=
+ 
+       if test -n "$convenience"; then
+ 	if test -n "$whole_archive_flag_spec"; then
+ 	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
+ 	else
+ 	  gentop="$output_objdir/${obj}x"
+-	  $show "${rm}r $gentop"
+-	  $run ${rm}r "$gentop"
+-	  $show "mkdir $gentop"
+-	  $run mkdir "$gentop"
+-	  status=$?
+-	  if test $status -ne 0 && test ! -d "$gentop"; then
+-	    exit $status
+-	  fi
+ 	  generated="$generated $gentop"
+ 
+-	  for xlib in $convenience; do
+-	    # Extract the objects.
+-	    case "$xlib" in
+-	    [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+-	    *) xabs=`pwd`"/$xlib" ;;
+-	    esac
+-	    xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+-	    xdir="$gentop/$xlib"
+-
+-	    $show "${rm}r $xdir"
+-	    $run ${rm}r "$xdir"
+-	    $show "mkdir $xdir"
+-	    $run mkdir "$xdir"
+-	    status=$?
+-	    if test $status -ne 0 && test ! -d "$xdir"; then
+-	      exit $status
+-	    fi
+-	    $show "(cd $xdir && $AR x $xabs)"
+-	    $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+-
+-	    reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
+-	  done
++	  func_extract_archives $gentop $convenience
++	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+ 	fi
+       fi
+ 
+       # Create the old-style object.
+-      reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs"
++      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ 
+       output="$obj"
+-      eval cmds=\"$reload_cmds\"
+-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++      cmds=$reload_cmds
++      save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
+ 	IFS="$save_ifs"
++	eval cmd=\"$cmd\"
+ 	$show "$cmd"
+ 	$run eval "$cmd" || exit $?
+       done
+@@ -2296,7 +4283,7 @@ EOF
+ 	  $run ${rm}r $gentop
+ 	fi
+ 
+-	exit 0
++	exit $EXIT_SUCCESS
+       fi
+ 
+       if test "$build_libtool_libs" != yes; then
+@@ -2307,37 +4294,24 @@ EOF
+ 
+ 	# Create an invalid libtool object if no PIC, so that we don't
+ 	# accidentally link it into a program.
+-	$show "echo timestamp > $libobj"
+-	$run eval "echo timestamp > $libobj" || exit $?
+-	exit 0
++	# $show "echo timestamp > $libobj"
++	# $run eval "echo timestamp > $libobj" || exit $?
++	exit $EXIT_SUCCESS
+       fi
+ 
+-      if test -n "$pic_flag"; then
++      if test -n "$pic_flag" || test "$pic_mode" != default; then
+ 	# Only do commands if we really have different PIC objects.
+ 	reload_objs="$libobjs $reload_conv_objs"
+ 	output="$libobj"
+-	eval cmds=\"$reload_cmds\"
+-	IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++	cmds=$reload_cmds
++	save_ifs="$IFS"; IFS='~'
+ 	for cmd in $cmds; do
+ 	  IFS="$save_ifs"
++	  eval cmd=\"$cmd\"
+ 	  $show "$cmd"
+ 	  $run eval "$cmd" || exit $?
+ 	done
+ 	IFS="$save_ifs"
+-      else
+-	# Just create a symlink.
+-	$show $rm $libobj
+-	$run $rm $libobj
+-	xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
+-	if test "X$xdir" = "X$libobj"; then
+-	  xdir="."
+-	else
+-	  xdir="$xdir"
+-	fi
+-	baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
+-	oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
+-	$show "(cd $xdir && $LN_S $oldobj $baseobj)"
+-	$run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
+       fi
+ 
+       if test -n "$gentop"; then
+@@ -2345,11 +4319,13 @@ EOF
+ 	$run ${rm}r $gentop
+       fi
+ 
+-      exit 0
++      exit $EXIT_SUCCESS
+       ;;
+ 
+-    # Anything else should be a program.
+-    *)
++    prog)
++      case $host in
++	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
++      esac
+       if test -n "$vinfo"; then
+ 	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+       fi
+@@ -2359,20 +4335,66 @@ EOF
+       fi
+ 
+       if test "$preload" = yes; then
+-	if test "$dlopen" = unknown && test "$dlopen_self" = unknown &&
++	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+ 	   test "$dlopen_self_static" = unknown; then
+ 	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+-	fi 
++	fi
+       fi
+-    
++
++      case $host in
++      *-*-rhapsody* | *-*-darwin1.[012])
++	# On Rhapsody replace the C library is the System framework
++	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++	;;
++      esac
++
++      case $host in
++      *darwin*)
++        # Don't allow lazy linking, it breaks C++ global constructors
++        if test "$tagname" = CXX ; then
++        compile_command="$compile_command ${wl}-bind_at_load"
++        finalize_command="$finalize_command ${wl}-bind_at_load"
++        fi
++        ;;
++      esac
++
++
++      # move library search paths that coincide with paths to not yet
++      # installed libraries to the beginning of the library search list
++      new_libs=
++      for path in $notinst_path; do
++	case " $new_libs " in
++	*" -L$path/$objdir "*) ;;
++	*)
++	  case " $compile_deplibs " in
++	  *" -L$path/$objdir "*)
++	    new_libs="$new_libs -L$path/$objdir" ;;
++	  esac
++	  ;;
++	esac
++      done
++      for deplib in $compile_deplibs; do
++	case $deplib in
++	-L*)
++	  case " $new_libs " in
++	  *" $deplib "*) ;;
++	  *) new_libs="$new_libs $deplib" ;;
++	  esac
++	  ;;
++	*) new_libs="$new_libs $deplib" ;;
++	esac
++      done
++      compile_deplibs="$new_libs"
++
++
++      compile_command="$compile_command $compile_deplibs"
++      finalize_command="$finalize_command $finalize_deplibs"
++
+       if test -n "$rpath$xrpath"; then
+ 	# If the user specified any rpath flags, then add them.
+ 	for libdir in $rpath $xrpath; do
+ 	  # This is the magic to use -rpath.
+-	  case "$compile_rpath " in
+-	  *" $libdir "*) ;;
+-	  *) compile_rpath="$compile_rpath $libdir" ;;
+-	  esac
+ 	  case "$finalize_rpath " in
+ 	  *" $libdir "*) ;;
+ 	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+@@ -2390,7 +4412,7 @@ EOF
+ 	      hardcode_libdirs="$libdir"
+ 	    else
+ 	      # Just accumulate the unique libdirs.
+-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ 		;;
+ 	      *)
+@@ -2408,6 +4430,19 @@ EOF
+ 	  *) perm_rpath="$perm_rpath $libdir" ;;
+ 	  esac
+ 	fi
++	case $host in
++	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
++	  case :$dllsearchpath: in
++	  *":$libdir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$libdir";;
++	  esac
++	  case :$dllsearchpath: in
++	  *":$testbindir:"*) ;;
++	  *) dllsearchpath="$dllsearchpath:$testbindir";;
++	  esac
++	  ;;
++	esac
+       done
+       # Substitute the hardcoded libdirs into the rpath.
+       if test -n "$hardcode_libdir_separator" &&
+@@ -2426,7 +4461,7 @@ EOF
+ 	      hardcode_libdirs="$libdir"
+ 	    else
+ 	      # Just accumulate the unique libdirs.
+-	      case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in
++	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ 	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ 		;;
+ 	      *)
+@@ -2453,23 +4488,6 @@ EOF
+       fi
+       finalize_rpath="$rpath"
+ 
+-      output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+-      if test "X$output_objdir" = "X$output"; then
+-	output_objdir="$objdir"
+-      else
+-	output_objdir="$output_objdir/$objdir"
+-      fi
+-
+-      # Create the binary in the object directory, then wrap it.
+-      if test ! -d $output_objdir; then
+-	$show "$mkdir $output_objdir"
+-	$run $mkdir $output_objdir
+-	status=$?
+-	if test $status -ne 0 && test ! -d $output_objdir; then
+-	  exit $status
+-	fi
+-      fi
+-
+       if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ 	# Transform all the library objects into standard objects.
+ 	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+@@ -2486,7 +4504,7 @@ EOF
+       fi
+ 
+       if test -n "$dlsyms"; then
+-	case "$dlsyms" in
++	case $dlsyms in
+ 	"") ;;
+ 	*.c)
+ 	  # Discover the nlist of each of the dlfiles.
+@@ -2518,38 +4536,50 @@ extern \"C\" {
+ 	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+ 
+ 	    # Add our own program objects to the symbol list.
+-	    progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ 	    for arg in $progfiles; do
+ 	      $show "extracting global C symbols from \`$arg'"
+ 	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ 	    done
+ 
+ 	    if test -n "$exclude_expsyms"; then
+-	      $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ 	      $run eval '$mv "$nlist"T "$nlist"'
+ 	    fi
+-	    
++
+ 	    if test -n "$export_symbols_regex"; then
+-	      $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ 	      $run eval '$mv "$nlist"T "$nlist"'
+ 	    fi
+ 
+ 	    # Prepare the list of exported symbols
+ 	    if test -z "$export_symbols"; then
+-	      export_symbols="$output_objdir/$output.exp"
++	      export_symbols="$output_objdir/$outputname.exp"
+ 	      $run $rm $export_symbols
+-	      $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++              case $host in
++              *cygwin* | *mingw* )
++	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
++                ;;
++              esac
+ 	    else
+-	      $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+-	      $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
++	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
++	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ 	      $run eval 'mv "$nlist"T "$nlist"'
++              case $host in
++              *cygwin* | *mingw* )
++	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
++		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
++                ;;
++              esac
+ 	    fi
+ 	  fi
+ 
+ 	  for arg in $dlprefiles; do
+ 	    $show "extracting global C symbols from \`$arg'"
+-	    name=`echo "$arg" | sed -e 's%^.*/%%'`
+-	    $run eval 'echo ": $name " >> "$nlist"'
++	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
++	    $run eval '$echo ": $name " >> "$nlist"'
+ 	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ 	  done
+ 
+@@ -2558,12 +4588,18 @@ extern \"C\" {
+ 	    test -f "$nlist" || : > "$nlist"
+ 
+ 	    if test -n "$exclude_expsyms"; then
+-	      egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ 	      $mv "$nlist"T "$nlist"
+ 	    fi
+ 
+ 	    # Try sorting and uniquifying the output.
+-	    if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
++	    if grep -v "^: " < "$nlist" |
++		if sort -k 3 </dev/null >/dev/null 2>&1; then
++		  sort -k 3
++		else
++		  sort +2
++		fi |
++		uniq > "$nlist"S; then
+ 	      :
+ 	    else
+ 	      grep -v "^: " < "$nlist" > "$nlist"S
+@@ -2572,7 +4608,7 @@ extern \"C\" {
+ 	    if test -f "$nlist"S; then
+ 	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+ 	    else
+-	      echo '/* NONE */' >> "$output_objdir/$dlsyms"
++	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+ 	    fi
+ 
+ 	    $echo >> "$output_objdir/$dlsyms" "\
+@@ -2580,27 +4616,44 @@ extern \"C\" {
+ #undef lt_preloaded_symbols
+ 
+ #if defined (__STDC__) && __STDC__
+-# define lt_ptr_t void *
++# define lt_ptr void *
+ #else
+-# define lt_ptr_t char *
++# define lt_ptr char *
+ # define const
+ #endif
+ 
+ /* The mapping between symbol names and symbols. */
++"
++
++	    case $host in
++	    *cygwin* | *mingw* )
++	  $echo >> "$output_objdir/$dlsyms" "\
++/* DATA imports from DLLs on WIN32 can't be const, because
++   runtime relocations are performed -- see ld's documentation
++   on pseudo-relocs */
++struct {
++"
++	      ;;
++	    * )
++	  $echo >> "$output_objdir/$dlsyms" "\
+ const struct {
++"
++	      ;;
++	    esac
++
++
++	  $echo >> "$output_objdir/$dlsyms" "\
+   const char *name;
+-  lt_ptr_t address;
++  lt_ptr address;
+ }
+ lt_preloaded_symbols[] =
+ {\
+ "
+ 
+-	    sed -n -e 's/^: \([^ ]*\) $/  {\"\1\", (lt_ptr_t) 0},/p' \
+-		-e 's/^. \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr_t) \&\2},/p' \
+-		  < "$nlist" >> "$output_objdir/$dlsyms"
++	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+ 
+ 	    $echo >> "$output_objdir/$dlsyms" "\
+-  {0, (lt_ptr_t) 0}
++  {0, (lt_ptr) 0}
+ };
+ 
+ /* This works around a problem in FreeBSD linker */
+@@ -2617,39 +4670,52 @@ static const void *lt_preloaded_setup() 
+ 	  fi
+ 
+ 	  pic_flag_for_symtable=
+-	  case "$host" in
++	  case $host in
+ 	  # compiling the symbol table file with pic_flag works around
+ 	  # a FreeBSD bug that causes programs to crash when -lm is
+ 	  # linked before any other PIC object.  But we must not use
+ 	  # pic_flag when linking with -static.  The problem exists in
+ 	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
++	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ 	    case "$compile_command " in
+ 	    *" -static "*) ;;
+-	    *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
++	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+ 	    esac;;
+ 	  *-*-hpux*)
+ 	    case "$compile_command " in
+ 	    *" -static "*) ;;
+-	    *) pic_flag_for_symtable=" $pic_flag -DPIC";;
++	    *) pic_flag_for_symtable=" $pic_flag";;
+ 	    esac
+ 	  esac
+ 
+ 	  # Now compile the dynamic symbol file.
+-	  $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+-	  $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
++	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
++	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+ 
+ 	  # Clean up the generated files.
+ 	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+ 	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+ 
+ 	  # Transform the symbol file into the correct name.
+-	  compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+-	  finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++          case $host in
++          *cygwin* | *mingw* )
++            if test -f "$output_objdir/${outputname}.def" ; then
++              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
++              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
++            else
++              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++             fi
++            ;;
++          * )
++            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++            ;;
++          esac
+ 	  ;;
+ 	*)
+ 	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+       else
+@@ -2662,7 +4728,7 @@ static const void *lt_preloaded_setup() 
+ 	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+       fi
+ 
+-      if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then
++      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ 	# Replace the output file specification.
+ 	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ 	link_command="$compile_command$compile_rpath"
+@@ -2670,22 +4736,22 @@ static const void *lt_preloaded_setup() 
+ 	# We have no uninstalled library dependencies, so finalize right now.
+ 	$show "$link_command"
+ 	$run eval "$link_command"
+-	status=$?
+-	
++	exit_status=$?
++
+ 	# Delete the generated files.
+ 	if test -n "$dlsyms"; then
+ 	  $show "$rm $output_objdir/${outputname}S.${objext}"
+ 	  $run $rm "$output_objdir/${outputname}S.${objext}"
+ 	fi
+ 
+-	exit $status
++	exit $exit_status
+       fi
+ 
+       if test -n "$shlibpath_var"; then
+ 	# We should set the shlibpath_var
+ 	rpath=
+ 	for dir in $temp_rpath; do
+-	  case "$dir" in
++	  case $dir in
+ 	  [\\/]* | [A-Za-z]:[\\/]*)
+ 	    # Absolute path.
+ 	    rpath="$rpath$dir:"
+@@ -2727,11 +4793,24 @@ static const void *lt_preloaded_setup() 
+ 	fi
+       fi
+ 
++      if test "$no_install" = yes; then
++	# We don't need to create a wrapper script.
++	link_command="$compile_var$compile_command$compile_rpath"
++	# Replace the output file specification.
++	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++	# Delete the old output file.
++	$run $rm $output
++	# Link the executable and exit
++	$show "$link_command"
++	$run eval "$link_command" || exit $?
++	exit $EXIT_SUCCESS
++      fi
++
+       if test "$hardcode_action" = relink; then
+ 	# Fast installation is not supported
+ 	link_command="$compile_var$compile_command$compile_rpath"
+ 	relink_command="$finalize_var$finalize_command$finalize_rpath"
+-	
++
+ 	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+ 	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+       else
+@@ -2751,7 +4830,7 @@ static const void *lt_preloaded_setup() 
+ 
+       # Replace the output file specification.
+       link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+-      
++
+       # Delete the old output files.
+       $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+ 
+@@ -2763,14 +4842,26 @@ static const void *lt_preloaded_setup() 
+ 
+       # Quote the relink command for shipping.
+       if test -n "$relink_command"; then
++	# Preserve any variables that may affect compiler behavior
++	for var in $variables_saved_for_relink; do
++	  if eval test -z \"\${$var+set}\"; then
++	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++	  elif eval var_value=\$$var; test -z "$var_value"; then
++	    relink_command="$var=; export $var; $relink_command"
++	  else
++	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
++	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
++	  fi
++	done
++	relink_command="(cd `pwd`; $relink_command)"
+ 	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+       fi
+ 
+       # Quote $echo for shipping.
+-      if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
+-	case "$0" in
+-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
+-	*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
++      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
++	case $progpath in
++	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
++	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ 	esac
+ 	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+       else
+@@ -2782,10 +4873,376 @@ static const void *lt_preloaded_setup() 
+ 	# win32 will think the script is a binary if it has
+ 	# a .exe suffix, so we strip it off here.
+ 	case $output in
+-	  *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
++	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
++	esac
++	# test for cygwin because mv fails w/o .exe extensions
++	case $host in
++	  *cygwin*)
++	    exeext=.exe
++	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
++	  *) exeext= ;;
+ 	esac
+-	$rm $output
+-	trap "$rm $output; exit 1" 1 2 15
++	case $host in
++	  *cygwin* | *mingw* )
++            output_name=`basename $output`
++            output_path=`dirname $output`
++            cwrappersource="$output_path/$objdir/lt-$output_name.c"
++            cwrapper="$output_path/$output_name.exe"
++            $rm $cwrappersource $cwrapper
++            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
++
++	    cat > $cwrappersource <<EOF
++
++/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
++   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++
++   The $output program cannot be directly executed until all the libtool
++   libraries that it depends on are installed.
++
++   This wrapper executable should never be moved out of the build directory.
++   If it is, it will not operate correctly.
++
++   Currently, it simply execs the wrapper *script* "/bin/sh $output",
++   but could eventually absorb all of the scripts functionality and
++   exec $objdir/$outputname directly.
++*/
++EOF
++	    cat >> $cwrappersource<<"EOF"
++#include <stdio.h>
++#include <stdlib.h>
++#include <unistd.h>
++#include <malloc.h>
++#include <stdarg.h>
++#include <assert.h>
++#include <string.h>
++#include <ctype.h>
++#include <sys/stat.h>
++
++#if defined(PATH_MAX)
++# define LT_PATHMAX PATH_MAX
++#elif defined(MAXPATHLEN)
++# define LT_PATHMAX MAXPATHLEN
++#else
++# define LT_PATHMAX 1024
++#endif
++
++#ifndef DIR_SEPARATOR
++# define DIR_SEPARATOR '/'
++# define PATH_SEPARATOR ':'
++#endif
++
++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
++  defined (__OS2__)
++# define HAVE_DOS_BASED_FILE_SYSTEM
++# ifndef DIR_SEPARATOR_2
++#  define DIR_SEPARATOR_2 '\\'
++# endif
++# ifndef PATH_SEPARATOR_2
++#  define PATH_SEPARATOR_2 ';'
++# endif
++#endif
++
++#ifndef DIR_SEPARATOR_2
++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
++#else /* DIR_SEPARATOR_2 */
++# define IS_DIR_SEPARATOR(ch) \
++        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
++#endif /* DIR_SEPARATOR_2 */
++
++#ifndef PATH_SEPARATOR_2
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
++#else /* PATH_SEPARATOR_2 */
++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
++#endif /* PATH_SEPARATOR_2 */
++
++#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
++#define XFREE(stale) do { \
++  if (stale) { free ((void *) stale); stale = 0; } \
++} while (0)
++
++/* -DDEBUG is fairly common in CFLAGS.  */
++#undef DEBUG
++#if defined DEBUGWRAPPER
++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
++#else
++# define DEBUG(format, ...)
++#endif
++
++const char *program_name = NULL;
++
++void * xmalloc (size_t num);
++char * xstrdup (const char *string);
++const char * base_name (const char *name);
++char * find_executable(const char *wrapper);
++int    check_executable(const char *path);
++char * strendzap(char *str, const char *pat);
++void lt_fatal (const char *message, ...);
++
++int
++main (int argc, char *argv[])
++{
++  char **newargz;
++  int i;
++
++  program_name = (char *) xstrdup (base_name (argv[0]));
++  DEBUG("(main) argv[0]      : %s\n",argv[0]);
++  DEBUG("(main) program_name : %s\n",program_name);
++  newargz = XMALLOC(char *, argc+2);
++EOF
++
++            cat >> $cwrappersource <<EOF
++  newargz[0] = (char *) xstrdup("$SHELL");
++EOF
++
++            cat >> $cwrappersource <<"EOF"
++  newargz[1] = find_executable(argv[0]);
++  if (newargz[1] == NULL)
++    lt_fatal("Couldn't find %s", argv[0]);
++  DEBUG("(main) found exe at : %s\n",newargz[1]);
++  /* we know the script has the same name, without the .exe */
++  /* so make sure newargz[1] doesn't end in .exe */
++  strendzap(newargz[1],".exe");
++  for (i = 1; i < argc; i++)
++    newargz[i+1] = xstrdup(argv[i]);
++  newargz[argc+1] = NULL;
++
++  for (i=0; i<argc+1; i++)
++  {
++    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
++    ;
++  }
++
++EOF
++
++            case $host_os in
++              mingw*)
++                cat >> $cwrappersource <<EOF
++  execv("$SHELL",(char const **)newargz);
++EOF
++              ;;
++              *)
++                cat >> $cwrappersource <<EOF
++  execv("$SHELL",newargz);
++EOF
++              ;;
++            esac
++
++            cat >> $cwrappersource <<"EOF"
++  return 127;
++}
++
++void *
++xmalloc (size_t num)
++{
++  void * p = (void *) malloc (num);
++  if (!p)
++    lt_fatal ("Memory exhausted");
++
++  return p;
++}
++
++char *
++xstrdup (const char *string)
++{
++  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
++;
++}
++
++const char *
++base_name (const char *name)
++{
++  const char *base;
++
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  /* Skip over the disk name in MSDOS pathnames. */
++  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
++    name += 2;
++#endif
++
++  for (base = name; *name; name++)
++    if (IS_DIR_SEPARATOR (*name))
++      base = name + 1;
++  return base;
++}
++
++int
++check_executable(const char * path)
++{
++  struct stat st;
++
++  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
++  if ((!path) || (!*path))
++    return 0;
++
++  if ((stat (path, &st) >= 0) &&
++      (
++        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
++#if defined (S_IXOTH)
++       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
++#endif
++#if defined (S_IXGRP)
++       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
++#endif
++       ((st.st_mode & S_IXUSR) == S_IXUSR))
++      )
++    return 1;
++  else
++    return 0;
++}
++
++/* Searches for the full path of the wrapper.  Returns
++   newly allocated full path name if found, NULL otherwise */
++char *
++find_executable (const char* wrapper)
++{
++  int has_slash = 0;
++  const char* p;
++  const char* p_next;
++  /* static buffer for getcwd */
++  char tmp[LT_PATHMAX + 1];
++  int tmp_len;
++  char* concat_name;
++
++  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
++
++  if ((wrapper == NULL) || (*wrapper == '\0'))
++    return NULL;
++
++  /* Absolute path? */
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
++  {
++    concat_name = xstrdup (wrapper);
++    if (check_executable(concat_name))
++      return concat_name;
++    XFREE(concat_name);
++  }
++  else
++  {
++#endif
++    if (IS_DIR_SEPARATOR (wrapper[0]))
++    {
++      concat_name = xstrdup (wrapper);
++      if (check_executable(concat_name))
++        return concat_name;
++      XFREE(concat_name);
++    }
++#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
++  }
++#endif
++
++  for (p = wrapper; *p; p++)
++    if (*p == '/')
++    {
++      has_slash = 1;
++      break;
++    }
++  if (!has_slash)
++  {
++    /* no slashes; search PATH */
++    const char* path = getenv ("PATH");
++    if (path != NULL)
++    {
++      for (p = path; *p; p = p_next)
++      {
++        const char* q;
++        size_t p_len;
++        for (q = p; *q; q++)
++          if (IS_PATH_SEPARATOR(*q))
++            break;
++        p_len = q - p;
++        p_next = (*q == '\0' ? q : q + 1);
++        if (p_len == 0)
++        {
++          /* empty path: current directory */
++          if (getcwd (tmp, LT_PATHMAX) == NULL)
++            lt_fatal ("getcwd failed");
++          tmp_len = strlen(tmp);
++          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++          memcpy (concat_name, tmp, tmp_len);
++          concat_name[tmp_len] = '/';
++          strcpy (concat_name + tmp_len + 1, wrapper);
++        }
++        else
++        {
++          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
++          memcpy (concat_name, p, p_len);
++          concat_name[p_len] = '/';
++          strcpy (concat_name + p_len + 1, wrapper);
++        }
++        if (check_executable(concat_name))
++          return concat_name;
++        XFREE(concat_name);
++      }
++    }
++    /* not found in PATH; assume curdir */
++  }
++  /* Relative path | not found in path: prepend cwd */
++  if (getcwd (tmp, LT_PATHMAX) == NULL)
++    lt_fatal ("getcwd failed");
++  tmp_len = strlen(tmp);
++  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
++  memcpy (concat_name, tmp, tmp_len);
++  concat_name[tmp_len] = '/';
++  strcpy (concat_name + tmp_len + 1, wrapper);
++
++  if (check_executable(concat_name))
++    return concat_name;
++  XFREE(concat_name);
++  return NULL;
++}
++
++char *
++strendzap(char *str, const char *pat)
++{
++  size_t len, patlen;
++
++  assert(str != NULL);
++  assert(pat != NULL);
++
++  len = strlen(str);
++  patlen = strlen(pat);
++
++  if (patlen <= len)
++  {
++    str += len - patlen;
++    if (strcmp(str, pat) == 0)
++      *str = '\0';
++  }
++  return str;
++}
++
++static void
++lt_error_core (int exit_status, const char * mode,
++          const char * message, va_list ap)
++{
++  fprintf (stderr, "%s: %s: ", program_name, mode);
++  vfprintf (stderr, message, ap);
++  fprintf (stderr, ".\n");
++
++  if (exit_status >= 0)
++    exit (exit_status);
++}
++
++void
++lt_fatal (const char *message, ...)
++{
++  va_list ap;
++  va_start (ap, message);
++  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
++  va_end (ap);
++}
++EOF
++          # we should really use a build-platform specific compiler
++          # here, but OTOH, the wrappers (shell script and this C one)
++          # are only useful if you want to execute the "real" binary.
++          # Since the "real" binary is built for $host, then this
++          # wrapper might as well be built for $host, too.
++          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
++          ;;
++        esac
++        $rm $output
++        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+ 
+ 	$echo > $output "\
+ #! $SHELL
+@@ -2801,19 +5258,19 @@ static const void *lt_preloaded_setup() 
+ 
+ # Sed substitution that helps us do robust quoting.  It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
++Xsed='${SED} -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+ 
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+ 
+ relink_command=\"$relink_command\"
+ 
+ # This environment variable determines our operation mode.
+ if test \"\$libtool_install_magic\" = \"$magic\"; then
+   # install mode needs the following variable:
+-  link_against_libtool_libs='$link_against_libtool_libs'
++  notinst_deplibs='$notinst_deplibs'
+ else
+   # When we are sourced in execute mode, \$file and \$echo are already set.
+   if test \"\$libtool_execute_magic\" != \"$magic\"; then
+@@ -2839,20 +5296,20 @@ else
+   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+ 
+   # Follow symbolic links until we get to the real thisdir.
+-  file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
++  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+   while test -n \"\$file\"; do
+     destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+ 
+     # If there was a directory component, then change thisdir.
+     if test \"x\$destdir\" != \"x\$file\"; then
+       case \"\$destdir\" in
+-      [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;;
++      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+       *) thisdir=\"\$thisdir/\$destdir\" ;;
+       esac
+     fi
+ 
+     file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+-    file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
++    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+   done
+ 
+   # Try to get the absolute directory name.
+@@ -2861,12 +5318,12 @@ else
+ "
+ 
+ 	if test "$fast_install" = yes; then
+-	  echo >> $output "\
+-  program=lt-'$outputname'
++	  $echo >> $output "\
++  program=lt-'$outputname'$exeext
+   progdir=\"\$thisdir/$objdir\"
+-  
++
+   if test ! -f \"\$progdir/\$program\" || \\
+-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
++     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+        test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+ 
+     file=\"\$\$-\$program\"
+@@ -2877,14 +5334,15 @@ else
+       $rm \"\$progdir/\$file\"
+     fi"
+ 
+-	  echo >> $output "\
++	  $echo >> $output "\
+ 
+     # relink executable if necessary
+     if test -n \"\$relink_command\"; then
+-      if (cd \"\$thisdir\" && eval \$relink_command); then :
++      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+       else
++	$echo \"\$relink_command_output\" >&2
+ 	$rm \"\$progdir/\$file\"
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+     fi
+ 
+@@ -2894,13 +5352,13 @@ else
+     $rm \"\$progdir/\$file\"
+   fi"
+ 	else
+-	  echo >> $output "\
++	  $echo >> $output "\
+   program='$outputname'
+   progdir=\"\$thisdir/$objdir\"
+ "
+ 	fi
+ 
+-	echo >> $output "\
++	$echo >> $output "\
+ 
+   if test -f \"\$progdir/\$program\"; then"
+ 
+@@ -2931,47 +5389,35 @@ else
+       # Run the actual program with our arguments.
+ "
+ 	case $host in
+-	  # win32 systems need to use the prog path for dll
+-	  # lookup to work
+-	*-*-cygwin*)
+-	  $echo >> $output "\
+-      exec \$progdir/\$program \${1+\"\$@\"}
+-"
+-	  ;;
+-
+ 	# Backslashes separate directories on plain windows
+ 	*-*-mingw | *-*-os2*)
+ 	  $echo >> $output "\
+-      exec \$progdir\\\\\$program \${1+\"\$@\"}
++      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+ "
+ 	  ;;
+ 
+ 	*)
+ 	  $echo >> $output "\
+-      # Export the path to the program.
+-      PATH=\"\$progdir:\$PATH\"
+-      export PATH
+-
+-      exec \$program \${1+\"\$@\"}
++      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+ "
+ 	  ;;
+ 	esac
+ 	$echo >> $output "\
+       \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+   else
+     # The program doesn't exist.
+-    \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
++    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+     \$echo \"This script is just a wrapper for \$program.\" 1>&2
+-    echo \"See the $PACKAGE documentation for more information.\" 1>&2
+-    exit 1
++    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
++    exit $EXIT_FAILURE
+   fi
+ fi\
+ "
+ 	chmod +x $output
+       fi
+-      exit 0
++      exit $EXIT_SUCCESS
+       ;;
+     esac
+ 
+@@ -2987,74 +5433,130 @@ fi\
+ 	  oldobjs="$libobjs_save"
+ 	  build_libtool_libs=no
+ 	else
+-	  oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
++	  oldobjs="$old_deplibs $non_pic_objects"
+ 	fi
+ 	addlibs="$old_convenience"
+       fi
+ 
+       if test -n "$addlibs"; then
+ 	gentop="$output_objdir/${outputname}x"
+-	$show "${rm}r $gentop"
+-	$run ${rm}r "$gentop"
+-	$show "mkdir $gentop"
+-	$run mkdir "$gentop"
+-	status=$?
+-	if test $status -ne 0 && test ! -d "$gentop"; then
+-	  exit $status
+-	fi
+ 	generated="$generated $gentop"
+-	  
+-	# Add in members from convenience archives.
+-	for xlib in $addlibs; do
+-	  # Extract the objects.
+-	  case "$xlib" in
+-	  [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
+-	  *) xabs=`pwd`"/$xlib" ;;
+-	  esac
+-	  xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
+-	  xdir="$gentop/$xlib"
+-
+-	  $show "${rm}r $xdir"
+-	  $run ${rm}r "$xdir"
+-	  $show "mkdir $xdir"
+-	  $run mkdir "$xdir"
+-	  status=$?
+-	  if test $status -ne 0 && test ! -d "$xdir"; then
+-	    exit $status
+-	  fi
+-	  $show "(cd $xdir && $AR x $xabs)"
+-	  $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
+ 
+-	  oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
+-	done
++	func_extract_archives $gentop $addlibs
++	oldobjs="$oldobjs $func_extract_archives_result"
+       fi
+ 
+       # Do each command in the archive commands.
+       if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+-	eval cmds=\"$old_archive_from_new_cmds\"
++       cmds=$old_archive_from_new_cmds
+       else
+-	# Ensure that we have .o objects in place in case we decided
+-	# not to build a shared library, and have fallen back to building
+-	# static libs even though --disable-static was passed!
+-	for oldobj in $oldobjs; do
+-	  if test ! -f $oldobj; then
+-	    xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
+-	    if test "X$xdir" = "X$oldobj"; then
+-	      xdir="."
+-	    else
+-	      xdir="$xdir"
+-	    fi
+-	    baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
+-	    obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
+-	    $show "(cd $xdir && ${LN_S} $obj $baseobj)"
+-	    $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
++	# POSIX demands no paths to be encoded in archives.  We have
++	# to avoid creating archives with duplicate basenames if we
++	# might have to extract them afterwards, e.g., when creating a
++	# static archive out of a convenience library, or when linking
++	# the entirety of a libtool archive into another (currently
++	# not supported by libtool).
++	if (for obj in $oldobjs
++	    do
++	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
++	    done | sort | sort -uc >/dev/null 2>&1); then
++	  :
++	else
++	  $echo "copying selected object files to avoid basename conflicts..."
++
++	  if test -z "$gentop"; then
++	    gentop="$output_objdir/${outputname}x"
++	    generated="$generated $gentop"
++
++	    $show "${rm}r $gentop"
++	    $run ${rm}r "$gentop"
++	    $show "$mkdir $gentop"
++	    $run $mkdir "$gentop"
++	    exit_status=$?
++	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
++	      exit $exit_status
++	    fi
+ 	  fi
+-	done
++
++	  save_oldobjs=$oldobjs
++	  oldobjs=
++	  counter=1
++	  for obj in $save_oldobjs
++	  do
++	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++	    case " $oldobjs " in
++	    " ") oldobjs=$obj ;;
++	    *[\ /]"$objbase "*)
++	      while :; do
++		# Make sure we don't pick an alternate name that also
++		# overlaps.
++		newobj=lt$counter-$objbase
++		counter=`expr $counter + 1`
++		case " $oldobjs " in
++		*[\ /]"$newobj "*) ;;
++		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
++		esac
++	      done
++	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
++	      $run ln "$obj" "$gentop/$newobj" ||
++	      $run cp "$obj" "$gentop/$newobj"
++	      oldobjs="$oldobjs $gentop/$newobj"
++	      ;;
++	    *) oldobjs="$oldobjs $obj" ;;
++	    esac
++	  done
++	fi
+ 
+ 	eval cmds=\"$old_archive_cmds\"
++
++	if len=`expr "X$cmds" : ".*"` &&
++	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
++	  cmds=$old_archive_cmds
++	else
++	  # the command line is too long to link in one step, link in parts
++	  $echo "using piecewise archive linking..."
++	  save_RANLIB=$RANLIB
++	  RANLIB=:
++	  objlist=
++	  concat_cmds=
++	  save_oldobjs=$oldobjs
++
++	  # Is there a better way of finding the last object in the list?
++	  for obj in $save_oldobjs
++	  do
++	    last_oldobj=$obj
++	  done
++	  for obj in $save_oldobjs
++	  do
++	    oldobjs="$objlist $obj"
++	    objlist="$objlist $obj"
++	    eval test_cmds=\"$old_archive_cmds\"
++	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
++	       test "$len" -le "$max_cmd_len"; then
++	      :
++	    else
++	      # the above command should be used before it gets too long
++	      oldobjs=$objlist
++	      if test "$obj" = "$last_oldobj" ; then
++	        RANLIB=$save_RANLIB
++	      fi
++	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
++	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
++	      objlist=
++	    fi
++	  done
++	  RANLIB=$save_RANLIB
++	  oldobjs=$objlist
++	  if test "X$oldobjs" = "X" ; then
++	    eval cmds=\"\$concat_cmds\"
++	  else
++	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
++	  fi
++	fi
+       fi
+-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++      save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
++        eval cmd=\"$cmd\"
+ 	IFS="$save_ifs"
+ 	$show "$cmd"
+ 	$run eval "$cmd" || exit $?
+@@ -3068,20 +5570,31 @@ fi\
+     fi
+ 
+     # Now create the libtool archive.
+-    case "$output" in
++    case $output in
+     *.la)
+       old_library=
+       test "$build_old_libs" = yes && old_library="$libname.$libext"
+       $show "creating $output"
+ 
+-      if test -n "$xrpath"; then
+-	temp_xrpath=
+-	for libdir in $xrpath; do
+-	  temp_xrpath="$temp_xrpath -R$libdir"
+-	done
+-	dependency_libs="$temp_xrpath $dependency_libs"
++      # Preserve any variables that may affect compiler behavior
++      for var in $variables_saved_for_relink; do
++	if eval test -z \"\${$var+set}\"; then
++	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++	elif eval var_value=\$$var; test -z "$var_value"; then
++	  relink_command="$var=; export $var; $relink_command"
++	else
++	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
++	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
++	fi
++      done
++      # Quote the link command for shipping.
++      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
++      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++      if test "$hardcode_automatic" = yes ; then
++	relink_command=
+       fi
+ 
++
+       # Only create the output if not a dry run.
+       if test -z "$run"; then
+ 	for installed in no yes; do
+@@ -3090,8 +5603,71 @@ fi\
+ 	      break
+ 	    fi
+ 	    output="$output_objdir/$outputname"i
++	    # Replace all uninstalled libtool libraries with the installed ones
++	    newdependency_libs=
++	    for deplib in $dependency_libs; do
++	      case $deplib in
++	      *.la)
++		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
++		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++		if test -z "$libdir"; then
++		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++		  exit $EXIT_FAILURE
++		fi
++		newdependency_libs="$newdependency_libs $libdir/$name"
++		;;
++	      *) newdependency_libs="$newdependency_libs $deplib" ;;
++	      esac
++	    done
++	    dependency_libs="$newdependency_libs"
++	    newdlfiles=
++	    for lib in $dlfiles; do
++	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++	      if test -z "$libdir"; then
++		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++		exit $EXIT_FAILURE
++	      fi
++	      newdlfiles="$newdlfiles $libdir/$name"
++	    done
++	    dlfiles="$newdlfiles"
++	    newdlprefiles=
++	    for lib in $dlprefiles; do
++	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++	      if test -z "$libdir"; then
++		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++		exit $EXIT_FAILURE
++	      fi
++	      newdlprefiles="$newdlprefiles $libdir/$name"
++	    done
++	    dlprefiles="$newdlprefiles"
++	  else
++	    newdlfiles=
++	    for lib in $dlfiles; do
++	      case $lib in
++		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++		*) abs=`pwd`"/$lib" ;;
++	      esac
++	      newdlfiles="$newdlfiles $abs"
++	    done
++	    dlfiles="$newdlfiles"
++	    newdlprefiles=
++	    for lib in $dlprefiles; do
++	      case $lib in
++		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
++		*) abs=`pwd`"/$lib" ;;
++	      esac
++	      newdlprefiles="$newdlprefiles $abs"
++	    done
++	    dlprefiles="$newdlprefiles"
+ 	  fi
+ 	  $rm $output
++	  # place dlname in correct position for cygwin
++	  tdlname=$dlname
++	  case $host,$output,$installed,$module,$dlname in
++	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
++	  esac
+ 	  $echo > $output "\
+ # $outputname - a libtool library file
+ # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+@@ -3100,7 +5676,7 @@ fi\
+ # It is necessary for linking the library.
+ 
+ # The name that we can dlopen(3).
+-dlname='$dlname'
++dlname='$tdlname'
+ 
+ # Names of this library.
+ library_names='$library_names'
+@@ -3119,19 +5695,29 @@ revision=$revision
+ # Is this an already installed library?
+ installed=$installed
+ 
++# Should we warn about portability when linking against -modules?
++shouldnotlink=$module
++
++# Files to dlopen/dlpreopen
++dlopen='$dlfiles'
++dlpreopen='$dlprefiles'
++
+ # Directory that this library needs to be installed in:
+-libdir='$install_libdir'\
+-"
++libdir='$install_libdir'"
++	  if test "$installed" = no && test "$need_relink" = yes; then
++	    $echo >> $output "\
++relink_command=\"$relink_command\""
++	  fi
+ 	done
+       fi
+ 
+       # Do a symbolic link so that the libtool archive can be found in
+       # LD_LIBRARY_PATH before the program is installed.
+       $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+-      $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $?
++      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+       ;;
+     esac
+-    exit 0
++    exit $EXIT_SUCCESS
+     ;;
+ 
+   # libtool install mode
+@@ -3140,11 +5726,13 @@ libdir='$install_libdir'\
+ 
+     # There may be an optional sh(1) argument at the beginning of
+     # install_prog (especially on Windows NT).
+-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then
++    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
++       # Allow the use of GNU shtool's install command.
++       $echo "X$nonopt" | grep shtool > /dev/null; then
+       # Aesthetically quote it.
+       arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+-      case "$arg" in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
++      case $arg in
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+ 	arg="\"$arg\""
+ 	;;
+       esac
+@@ -3153,14 +5741,14 @@ libdir='$install_libdir'\
+       shift
+     else
+       install_prog=
+-      arg="$nonopt"
++      arg=$nonopt
+     fi
+ 
+     # The real first argument should be the name of the installation program.
+     # Aesthetically quote it.
+     arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-    case "$arg" in
+-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
++    case $arg in
++    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+       arg="\"$arg\""
+       ;;
+     esac
+@@ -3178,28 +5766,31 @@ libdir='$install_libdir'\
+     do
+       if test -n "$dest"; then
+ 	files="$files $dest"
+-	dest="$arg"
++	dest=$arg
+ 	continue
+       fi
+ 
+-      case "$arg" in
++      case $arg in
+       -d) isdir=yes ;;
+-      -f) prev="-f" ;;
+-      -g) prev="-g" ;;
+-      -m) prev="-m" ;;
+-      -o) prev="-o" ;;
++      -f) 
++      	case " $install_prog " in
++	*[\\\ /]cp\ *) ;;
++	*) prev=$arg ;;
++	esac
++	;;
++      -g | -m | -o) prev=$arg ;;
+       -s)
+ 	stripme=" -s"
+ 	continue
+ 	;;
+-      -*) ;;
+-
++      -*)
++	;;
+       *)
+ 	# If the previous option needed an argument, then skip it.
+ 	if test -n "$prev"; then
+ 	  prev=
+ 	else
+-	  dest="$arg"
++	  dest=$arg
+ 	  continue
+ 	fi
+ 	;;
+@@ -3207,8 +5798,8 @@ libdir='$install_libdir'\
+ 
+       # Aesthetically quote the argument.
+       arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+-      case "$arg" in
+-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*)
++      case $arg in
++      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+ 	arg="\"$arg\""
+ 	;;
+       esac
+@@ -3218,13 +5809,13 @@ libdir='$install_libdir'\
+     if test -z "$install_prog"; then
+       $echo "$modename: you must specify an install program" 1>&2
+       $echo "$help" 1>&2
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+ 
+     if test -n "$prev"; then
+       $echo "$modename: the \`$prev' option requires an argument" 1>&2
+       $echo "$help" 1>&2
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+ 
+     if test -z "$files"; then
+@@ -3234,7 +5825,7 @@ libdir='$install_libdir'\
+ 	$echo "$modename: you must specify a destination" 1>&2
+       fi
+       $echo "$help" 1>&2
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+ 
+     # Strip any trailing slash from the destination.
+@@ -3252,22 +5843,22 @@ libdir='$install_libdir'\
+ 
+       # Not a directory, so check to see that there is only one file specified.
+       set dummy $files
+-      if test $# -gt 2; then
++      if test "$#" -gt 2; then
+ 	$echo "$modename: \`$dest' is not a directory" 1>&2
+ 	$echo "$help" 1>&2
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+     fi
+-    case "$destdir" in
++    case $destdir in
+     [\\/]* | [A-Za-z]:[\\/]*) ;;
+     *)
+       for file in $files; do
+-	case "$file" in
++	case $file in
+ 	*.lo) ;;
+ 	*)
+ 	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+ 	  $echo "$help" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+       done
+@@ -3284,25 +5875,26 @@ libdir='$install_libdir'\
+     for file in $files; do
+ 
+       # Do each installation.
+-      case "$file" in
+-      *.a | *.lib)
++      case $file in
++      *.$libext)
+ 	# Do the static libraries later.
+ 	staticlibs="$staticlibs $file"
+ 	;;
+ 
+       *.la)
+ 	# Check to see that this really is a libtool archive.
+-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ 	else
+ 	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ 	  $echo "$help" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 
+ 	library_names=
+ 	old_library=
++	relink_command=
+ 	# If there is no directory component, then add one.
+-	case "$file" in
++	case $file in
+ 	*/* | *\\*) . $file ;;
+ 	*) . ./$file ;;
+ 	esac
+@@ -3321,10 +5913,41 @@ libdir='$install_libdir'\
+ 	  esac
+ 	fi
+ 
+-	dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/"
++	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+ 	test "X$dir" = "X$file/" && dir=
+ 	dir="$dir$objdir"
+ 
++	if test -n "$relink_command"; then
++	  # Determine the prefix the user has applied to our future dir.
++	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
++
++	  # Don't allow the user to place us outside of our expected
++	  # location b/c this prevents finding dependent libraries that
++	  # are installed to the same prefix.
++	  # At present, this check doesn't affect windows .dll's that
++	  # are installed into $libdir/../bin (currently, that works fine)
++	  # but it's something to keep an eye on.
++	  if test "$inst_prefix_dir" = "$destdir"; then
++	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++
++	  if test -n "$inst_prefix_dir"; then
++	    # Stick the inst_prefix_dir data into the link command.
++	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++	  else
++	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
++	  fi
++
++	  $echo "$modename: warning: relinking \`$file'" 1>&2
++	  $show "$relink_command"
++	  if $run eval "$relink_command"; then :
++	  else
++	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
++	    exit $EXIT_FAILURE
++	  fi
++	fi
++
+ 	# See the names of the shared library.
+ 	set dummy $library_names
+ 	if test -n "$2"; then
+@@ -3332,29 +5955,49 @@ libdir='$install_libdir'\
+ 	  shift
+ 	  shift
+ 
++	  srcname="$realname"
++	  test -n "$relink_command" && srcname="$realname"T
++
+ 	  # Install the shared library and build the symlinks.
+-	  $show "$install_prog $dir/$realname $destdir/$realname"
+-	  $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $?
++	  $show "$install_prog $dir/$srcname $destdir/$realname"
++	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
++	  if test -n "$stripme" && test -n "$striplib"; then
++	    $show "$striplib $destdir/$realname"
++	    $run eval "$striplib $destdir/$realname" || exit $?
++	  fi
+ 
+-	  if test $# -gt 0; then
++	  if test "$#" -gt 0; then
+ 	    # Delete the old symlinks, and create new ones.
++	    # Try `ln -sf' first, because the `ln' binary might depend on
++	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
++	    # so we also need to try rm && ln -s.
+ 	    for linkname
+ 	    do
+ 	      if test "$linkname" != "$realname"; then
+-		$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
+-		$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
++                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+ 	      fi
+ 	    done
+ 	  fi
+ 
+ 	  # Do each command in the postinstall commands.
+ 	  lib="$destdir/$realname"
+-	  eval cmds=\"$postinstall_cmds\"
+-	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++	  cmds=$postinstall_cmds
++	  save_ifs="$IFS"; IFS='~'
+ 	  for cmd in $cmds; do
+ 	    IFS="$save_ifs"
++	    eval cmd=\"$cmd\"
+ 	    $show "$cmd"
+-	    $run eval "$cmd" || exit $?
++	    $run eval "$cmd" || {
++	      lt_exit=$?
++
++	      # Restore the uninstalled library and exit
++	      if test "$mode" = relink; then
++		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
++	      fi
++
++	      exit $lt_exit
++	    }
+ 	  done
+ 	  IFS="$save_ifs"
+ 	fi
+@@ -3381,18 +6024,18 @@ libdir='$install_libdir'\
+ 	fi
+ 
+ 	# Deduce the name of the destination old-style object file.
+-	case "$destfile" in
++	case $destfile in
+ 	*.lo)
+ 	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+ 	  ;;
+-	*.o | *.obj)
++	*.$objext)
+ 	  staticdest="$destfile"
+ 	  destfile=
+ 	  ;;
+ 	*)
+ 	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+ 	  $echo "$help" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	  ;;
+ 	esac
+ 
+@@ -3410,7 +6053,7 @@ libdir='$install_libdir'\
+ 	  $show "$install_prog $staticobj $staticdest"
+ 	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+ 	fi
+-	exit 0
++	exit $EXIT_SUCCESS
+ 	;;
+ 
+       *)
+@@ -3422,52 +6065,84 @@ libdir='$install_libdir'\
+ 	  destfile="$destdir/$destfile"
+ 	fi
+ 
++	# If the file is missing, and there is a .exe on the end, strip it
++	# because it is most likely a libtool script we actually want to
++	# install
++	stripped_ext=""
++	case $file in
++	  *.exe)
++	    if test ! -f "$file"; then
++	      file=`$echo $file|${SED} 's,.exe$,,'`
++	      stripped_ext=".exe"
++	    fi
++	    ;;
++	esac
++
+ 	# Do a test to see if this is really a libtool program.
+-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+-	  link_against_libtool_libs=
++	case $host in
++	*cygwin*|*mingw*)
++	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
++	    ;;
++	*)
++	    wrapper=$file
++	    ;;
++	esac
++	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
++	  notinst_deplibs=
+ 	  relink_command=
+ 
++	  # Note that it is not necessary on cygwin/mingw to append a dot to
++	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
++	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
++	  # `FILE.' does not work on cygwin managed mounts.
++	  #
+ 	  # If there is no directory component, then add one.
+-	  case "$file" in
+-	  */* | *\\*) . $file ;;
+-	  *) . ./$file ;;
++	  case $wrapper in
++	  */* | *\\*) . ${wrapper} ;;
++	  *) . ./${wrapper} ;;
+ 	  esac
+ 
+ 	  # Check the variables that should have been set.
+-	  if test -z "$link_against_libtool_libs"; then
+-	    $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
+-	    exit 1
++	  if test -z "$notinst_deplibs"; then
++	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
++	    exit $EXIT_FAILURE
+ 	  fi
+ 
+ 	  finalize=yes
+-	  for lib in $link_against_libtool_libs; do
++	  for lib in $notinst_deplibs; do
+ 	    # Check to see that each library is installed.
+ 	    libdir=
+ 	    if test -f "$lib"; then
+ 	      # If there is no directory component, then add one.
+-	      case "$lib" in
++	      case $lib in
+ 	      */* | *\\*) . $lib ;;
+ 	      *) . ./$lib ;;
+ 	      esac
+ 	    fi
+-	    libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`"
++	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ 	    if test -n "$libdir" && test ! -f "$libfile"; then
+ 	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+ 	      finalize=no
+ 	    fi
+ 	  done
+ 
++	  relink_command=
++	  # Note that it is not necessary on cygwin/mingw to append a dot to
++	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
++	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
++	  # `FILE.' does not work on cygwin managed mounts.
++	  #
++	  # If there is no directory component, then add one.
++	  case $wrapper in
++	  */* | *\\*) . ${wrapper} ;;
++	  *) . ./${wrapper} ;;
++	  esac
++
+ 	  outputname=
+ 	  if test "$fast_install" = no && test -n "$relink_command"; then
+ 	    if test "$finalize" = yes && test -z "$run"; then
+-	      tmpdir="/tmp"
+-	      test -n "$TMPDIR" && tmpdir="$TMPDIR"
+-	      tmpdir="$tmpdir/libtool-$$"
+-	      if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+-	      else
+-		$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
+-		continue
+-	      fi
++	      tmpdir=`func_mktempdir`
++	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+ 	      outputname="$tmpdir/$file"
+ 	      # Replace the output file specification.
+ 	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+@@ -3485,10 +6160,27 @@ libdir='$install_libdir'\
+ 	    fi
+ 	  else
+ 	    # Install the binary that we compiled earlier.
+-	    file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
++	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ 	  fi
+ 	fi
+ 
++	# remove .exe since cygwin /usr/bin/install will append another
++	# one anyway 
++	case $install_prog,$host in
++	*/usr/bin/install*,*cygwin*)
++	  case $file:$destfile in
++	  *.exe:*.exe)
++	    # this is ok
++	    ;;
++	  *.exe:*)
++	    destfile=$destfile.exe
++	    ;;
++	  *:*.exe)
++	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
++	    ;;
++	  esac
++	  ;;
++	esac
+ 	$show "$install_prog$stripme $file $destfile"
+ 	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+ 	test -n "$outputname" && ${rm}r "$tmpdir"
+@@ -3505,11 +6197,17 @@ libdir='$install_libdir'\
+       $show "$install_prog $file $oldlib"
+       $run eval "$install_prog \$file \$oldlib" || exit $?
+ 
++      if test -n "$stripme" && test -n "$old_striplib"; then
++	$show "$old_striplib $oldlib"
++	$run eval "$old_striplib $oldlib" || exit $?
++      fi
++
+       # Do each command in the postinstall commands.
+-      eval cmds=\"$old_postinstall_cmds\"
+-      IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++      cmds=$old_postinstall_cmds
++      save_ifs="$IFS"; IFS='~'
+       for cmd in $cmds; do
+ 	IFS="$save_ifs"
++	eval cmd=\"$cmd\"
+ 	$show "$cmd"
+ 	$run eval "$cmd" || exit $?
+       done
+@@ -3523,11 +6221,10 @@ libdir='$install_libdir'\
+     if test -n "$current_libdirs"; then
+       # Maybe just do a dry run.
+       test -n "$run" && current_libdirs=" -n$current_libdirs"
+-      exec $SHELL $0 --finish$current_libdirs
+-      exit 1
++      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
++    else
++      exit $EXIT_SUCCESS
+     fi
+-
+-    exit 0
+     ;;
+ 
+   # libtool finish mode
+@@ -3545,10 +6242,11 @@ libdir='$install_libdir'\
+       for libdir in $libdirs; do
+ 	if test -n "$finish_cmds"; then
+ 	  # Do each command in the finish commands.
+-	  eval cmds=\"$finish_cmds\"
+-	  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
++	  cmds=$finish_cmds
++	  save_ifs="$IFS"; IFS='~'
+ 	  for cmd in $cmds; do
+ 	    IFS="$save_ifs"
++	    eval cmd=\"$cmd\"
+ 	    $show "$cmd"
+ 	    $run eval "$cmd" || admincmds="$admincmds
+        $cmd"
+@@ -3565,43 +6263,43 @@ libdir='$install_libdir'\
+     fi
+ 
+     # Exit here if they wanted silent mode.
+-    test "$show" = : && exit 0
++    test "$show" = : && exit $EXIT_SUCCESS
+ 
+-    echo "----------------------------------------------------------------------"
+-    echo "Libraries have been installed in:"
++    $echo "X----------------------------------------------------------------------" | $Xsed
++    $echo "Libraries have been installed in:"
+     for libdir in $libdirs; do
+-      echo "   $libdir"
++      $echo "   $libdir"
+     done
+-    echo
+-    echo "If you ever happen to want to link against installed libraries"
+-    echo "in a given directory, LIBDIR, you must either use libtool, and"
+-    echo "specify the full pathname of the library, or use \`-LLIBDIR'"
+-    echo "flag during linking and do at least one of the following:"
++    $echo
++    $echo "If you ever happen to want to link against installed libraries"
++    $echo "in a given directory, LIBDIR, you must either use libtool, and"
++    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++    $echo "flag during linking and do at least one of the following:"
+     if test -n "$shlibpath_var"; then
+-      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+-      echo "     during execution"
++      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
++      $echo "     during execution"
+     fi
+     if test -n "$runpath_var"; then
+-      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+-      echo "     during linking"
++      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
++      $echo "     during linking"
+     fi
+     if test -n "$hardcode_libdir_flag_spec"; then
+       libdir=LIBDIR
+       eval flag=\"$hardcode_libdir_flag_spec\"
+ 
+-      echo "   - use the \`$flag' linker flag"
++      $echo "   - use the \`$flag' linker flag"
+     fi
+     if test -n "$admincmds"; then
+-      echo "   - have your system administrator run these commands:$admincmds"
++      $echo "   - have your system administrator run these commands:$admincmds"
+     fi
+     if test -f /etc/ld.so.conf; then
+-      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+     fi
+-    echo
+-    echo "See any operating system documentation about shared libraries for"
+-    echo "more information, such as the ld(1) and ld.so(8) manual pages."
+-    echo "----------------------------------------------------------------------"
+-    exit 0
++    $echo
++    $echo "See any operating system documentation about shared libraries for"
++    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
++    $echo "X----------------------------------------------------------------------" | $Xsed
++    exit $EXIT_SUCCESS
+     ;;
+ 
+   # libtool execute mode
+@@ -3613,7 +6311,7 @@ libdir='$install_libdir'\
+     if test -z "$cmd"; then
+       $echo "$modename: you must specify a COMMAND" 1>&2
+       $echo "$help"
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+ 
+     # Handle -dlopen flags immediately.
+@@ -3621,18 +6319,18 @@ libdir='$install_libdir'\
+       if test ! -f "$file"; then
+ 	$echo "$modename: \`$file' is not a file" 1>&2
+ 	$echo "$help" 1>&2
+-	exit 1
++	exit $EXIT_FAILURE
+       fi
+ 
+       dir=
+-      case "$file" in
++      case $file in
+       *.la)
+ 	# Check to see that this really is a libtool archive.
+-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ 	else
+ 	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ 	  $echo "$help" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 
+ 	# Read the libtool library.
+@@ -3640,7 +6338,7 @@ libdir='$install_libdir'\
+ 	library_names=
+ 
+ 	# If there is no directory component, then add one.
+-	case "$file" in
++	case $file in
+ 	*/* | *\\*) . $file ;;
+ 	*) . ./$file ;;
+ 	esac
+@@ -3659,7 +6357,7 @@ libdir='$install_libdir'\
+ 	  dir="$dir/$objdir"
+ 	else
+ 	  $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+-	  exit 1
++	  exit $EXIT_FAILURE
+ 	fi
+ 	;;
+ 
+@@ -3695,13 +6393,13 @@ libdir='$install_libdir'\
+     args=
+     for file
+     do
+-      case "$file" in
++      case $file in
+       -*) ;;
+       *)
+ 	# Do a test to see if this is really a libtool program.
+-	if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ 	  # If there is no directory component, then add one.
+-	  case "$file" in
++	  case $file in
+ 	  */* | *\\*) . $file ;;
+ 	  *) . ./$file ;;
+ 	  esac
+@@ -3718,11 +6416,11 @@ libdir='$install_libdir'\
+ 
+     if test -z "$run"; then
+       if test -n "$shlibpath_var"; then
+-        # Export the shlibpath_var.
+-        eval "export $shlibpath_var"
++	# Export the shlibpath_var.
++	eval "export $shlibpath_var"
+       fi
+ 
+-      # Restore saved enviroment variables
++      # Restore saved environment variables
+       if test "${save_LC_ALL+set}" = set; then
+ 	LC_ALL="$save_LC_ALL"; export LC_ALL
+       fi
+@@ -3730,31 +6428,35 @@ libdir='$install_libdir'\
+ 	LANG="$save_LANG"; export LANG
+       fi
+ 
+-      # Now actually exec the command.
+-      eval "exec \$cmd$args"
+-
+-      $echo "$modename: cannot exec \$cmd$args"
+-      exit 1
++      # Now prepare to actually exec the command.
++      exec_cmd="\$cmd$args"
+     else
+       # Display what would be done.
+       if test -n "$shlibpath_var"; then
+-        eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+-        $echo "export $shlibpath_var"
++	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
++	$echo "export $shlibpath_var"
+       fi
+       $echo "$cmd$args"
+-      exit 0
++      exit $EXIT_SUCCESS
+     fi
+     ;;
+ 
+-  # libtool uninstall mode
+-  uninstall)
+-    modename="$modename: uninstall"
++  # libtool clean and uninstall mode
++  clean | uninstall)
++    modename="$modename: $mode"
+     rm="$nonopt"
+     files=
++    rmforce=
++    exit_status=0
++
++    # This variable tells wrapper scripts just to set variables rather
++    # than running their programs.
++    libtool_install_magic="$magic"
+ 
+     for arg
+     do
+-      case "$arg" in
++      case $arg in
++      -f) rm="$rm $arg"; rmforce=yes ;;
+       -*) rm="$rm $arg" ;;
+       *) files="$files $arg" ;;
+       esac
+@@ -3763,91 +6465,192 @@ libdir='$install_libdir'\
+     if test -z "$rm"; then
+       $echo "$modename: you must specify an RM program" 1>&2
+       $echo "$help" 1>&2
+-      exit 1
++      exit $EXIT_FAILURE
+     fi
+ 
++    rmdirs=
++
++    origobjdir="$objdir"
+     for file in $files; do
+       dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+-      test "X$dir" = "X$file" && dir=.
++      if test "X$dir" = "X$file"; then
++	dir=.
++	objdir="$origobjdir"
++      else
++	objdir="$dir/$origobjdir"
++      fi
+       name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++      test "$mode" = uninstall && objdir="$dir"
++
++      # Remember objdir for removal later, being careful to avoid duplicates
++      if test "$mode" = clean; then
++	case " $rmdirs " in
++	  *" $objdir "*) ;;
++	  *) rmdirs="$rmdirs $objdir" ;;
++	esac
++      fi
++
++      # Don't error if the file doesn't exist and rm -f was used.
++      if (test -L "$file") >/dev/null 2>&1 \
++	|| (test -h "$file") >/dev/null 2>&1 \
++	|| test -f "$file"; then
++	:
++      elif test -d "$file"; then
++	exit_status=1
++	continue
++      elif test "$rmforce" = yes; then
++	continue
++      fi
+ 
+       rmfiles="$file"
+ 
+-      case "$name" in
++      case $name in
+       *.la)
+ 	# Possibly a libtool archive, so verify it.
+-	if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ 	  . $dir/$name
+ 
+ 	  # Delete the libtool libraries and symlinks.
+ 	  for n in $library_names; do
+-	    rmfiles="$rmfiles $dir/$n"
++	    rmfiles="$rmfiles $objdir/$n"
+ 	  done
+-	  test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library"
++	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+ 
+-	  $show "$rm $rmfiles"
+-	  $run $rm $rmfiles
+-
+-	  if test -n "$library_names"; then
+-	    # Do each command in the postuninstall commands.
+-	    eval cmds=\"$postuninstall_cmds\"
+-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+-	    for cmd in $cmds; do
++	  case "$mode" in
++	  clean)
++	    case "  $library_names " in
++	    # "  " in the beginning catches empty $dlname
++	    *" $dlname "*) ;;
++	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
++	    esac
++	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++	    ;;
++	  uninstall)
++	    if test -n "$library_names"; then
++	      # Do each command in the postuninstall commands.
++	      cmds=$postuninstall_cmds
++	      save_ifs="$IFS"; IFS='~'
++	      for cmd in $cmds; do
++		IFS="$save_ifs"
++		eval cmd=\"$cmd\"
++		$show "$cmd"
++		$run eval "$cmd"
++		if test "$?" -ne 0 && test "$rmforce" != yes; then
++		  exit_status=1
++		fi
++	      done
+ 	      IFS="$save_ifs"
+-	      $show "$cmd"
+-	      $run eval "$cmd"
+-	    done
+-	    IFS="$save_ifs"
+-	  fi
++	    fi
+ 
+-	  if test -n "$old_library"; then
+-	    # Do each command in the old_postuninstall commands.
+-	    eval cmds=\"$old_postuninstall_cmds\"
+-	    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS='~'
+-	    for cmd in $cmds; do
++	    if test -n "$old_library"; then
++	      # Do each command in the old_postuninstall commands.
++	      cmds=$old_postuninstall_cmds
++	      save_ifs="$IFS"; IFS='~'
++	      for cmd in $cmds; do
++		IFS="$save_ifs"
++		eval cmd=\"$cmd\"
++		$show "$cmd"
++		$run eval "$cmd"
++		if test "$?" -ne 0 && test "$rmforce" != yes; then
++		  exit_status=1
++		fi
++	      done
+ 	      IFS="$save_ifs"
+-	      $show "$cmd"
+-	      $run eval "$cmd"
+-	    done
+-	    IFS="$save_ifs"
+-	  fi
+-
+-	  # FIXME: should reinstall the best remaining shared library.
++	    fi
++	    # FIXME: should reinstall the best remaining shared library.
++	    ;;
++	  esac
+ 	fi
+ 	;;
+ 
+       *.lo)
+-	if test "$build_old_libs" = yes; then
+-	  oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
+-	  rmfiles="$rmfiles $dir/$oldobj"
++	# Possibly a libtool object, so verify it.
++	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++
++	  # Read the .lo file
++	  . $dir/$name
++
++	  # Add PIC object to the list of files to remove.
++	  if test -n "$pic_object" \
++	     && test "$pic_object" != none; then
++	    rmfiles="$rmfiles $dir/$pic_object"
++	  fi
++
++	  # Add non-PIC object to the list of files to remove.
++	  if test -n "$non_pic_object" \
++	     && test "$non_pic_object" != none; then
++	    rmfiles="$rmfiles $dir/$non_pic_object"
++	  fi
+ 	fi
+-	$show "$rm $rmfiles"
+-	$run $rm $rmfiles
+ 	;;
+ 
+       *)
+-	$show "$rm $rmfiles"
+-	$run $rm $rmfiles
++	if test "$mode" = clean ; then
++	  noexename=$name
++	  case $file in
++	  *.exe)
++	    file=`$echo $file|${SED} 's,.exe$,,'`
++	    noexename=`$echo $name|${SED} 's,.exe$,,'`
++	    # $file with .exe has already been added to rmfiles,
++	    # add $file without .exe
++	    rmfiles="$rmfiles $file"
++	    ;;
++	  esac
++	  # Do a test to see if this is a libtool program.
++	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++	    relink_command=
++	    . $dir/$noexename
++
++	    # note $name still contains .exe if it was in $file originally
++	    # as does the version of $file that was added into $rmfiles
++	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++	    if test "$fast_install" = yes && test -n "$relink_command"; then
++	      rmfiles="$rmfiles $objdir/lt-$name"
++	    fi
++	    if test "X$noexename" != "X$name" ; then
++	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
++	    fi
++	  fi
++	fi
+ 	;;
+       esac
++      $show "$rm $rmfiles"
++      $run $rm $rmfiles || exit_status=1
+     done
+-    exit 0
++    objdir="$origobjdir"
++
++    # Try to remove the ${objdir}s in the directories where we deleted files
++    for dir in $rmdirs; do
++      if test -d "$dir"; then
++	$show "rmdir $dir"
++	$run rmdir $dir >/dev/null 2>&1
++      fi
++    done
++
++    exit $exit_status
+     ;;
+ 
+   "")
+     $echo "$modename: you must specify a MODE" 1>&2
+     $echo "$generic_help" 1>&2
+-    exit 1
++    exit $EXIT_FAILURE
+     ;;
+   esac
+ 
+-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+-  $echo "$generic_help" 1>&2
+-  exit 1
++  if test -z "$exec_cmd"; then
++    $echo "$modename: invalid operation mode \`$mode'" 1>&2
++    $echo "$generic_help" 1>&2
++    exit $EXIT_FAILURE
++  fi
+ fi # test -z "$show_help"
+ 
++if test -n "$exec_cmd"; then
++  eval exec $exec_cmd
++  exit $EXIT_FAILURE
++fi
++
+ # We need to display help for each of the modes.
+-case "$mode" in
++case $mode in
+ "") $echo \
+ "Usage: $modename [OPTION]... [MODE-ARG]...
+ 
+@@ -3862,10 +6665,12 @@ Provide generalized library-building sup
+     --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+     --quiet           same as \`--silent'
+     --silent          don't print informational messages
++    --tag=TAG         use configuration variables from tag TAG
+     --version         print version information
+ 
+ MODE must be one of the following:
+ 
++      clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+@@ -3874,8 +6679,24 @@ MODE must be one of the following:
+       uninstall       remove libraries from an installed directory
+ 
+ MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+-a more detailed description of MODE."
+-  exit 0
++a more detailed description of MODE.
++
++Report bugs to <bug-libtool@gnu.org>."
++  exit $EXIT_SUCCESS
++  ;;
++
++clean)
++  $echo \
++"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
++
++Remove files from the build directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, object or program, all the files associated
++with it are deleted. Otherwise, only FILE itself is deleted using RM."
+   ;;
+ 
+ compile)
+@@ -3887,6 +6708,8 @@ Compile a source file into a libtool lib
+ This mode accepts the following additional options:
+ 
+   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
++  -prefer-pic       try to building PIC objects only
++  -prefer-non-pic   try to building non-PIC objects only
+   -static           always build a \`.o' file suitable for static linking
+ 
+ COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+@@ -3966,8 +6789,13 @@ The following components of LINK-COMMAND
+   -LLIBDIR          search LIBDIR for required installed libraries
+   -lNAME            OUTPUT-FILE requires the installed library libNAME
+   -module           build a library that can dlopened
++  -no-fast-install  disable the fast-install mode
++  -no-install       link a not-installable executable
+   -no-undefined     declare that a library does not refer to external symbols
+   -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
++  -objectlist FILE  Use a list of object files found in FILE to specify objects
++  -precious-files-regex REGEX
++                    don't remove output files matching REGEX
+   -release RELEASE  specify package release information
+   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+@@ -4009,14 +6837,33 @@ Otherwise, only FILE itself is deleted u
+ *)
+   $echo "$modename: invalid operation mode \`$mode'" 1>&2
+   $echo "$help" 1>&2
+-  exit 1
++  exit $EXIT_FAILURE
+   ;;
+ esac
+ 
+-echo
++$echo
+ $echo "Try \`$modename --help' for more information about other modes."
+ 
+-exit 0
++exit $?
++
++# The TAGs below are defined such that we never get into a situation
++# in which we disable both kinds of libraries.  Given conflicting
++# choices, we go for a static library, that is the most portable,
++# since we can't tell whether shared libraries were disabled because
++# the user asked for that or because the platform doesn't support
++# them.  This is particularly important on AIX, because we don't
++# support having both static and shared libraries enabled at the same
++# time on that platform, so we default to a shared-only configuration.
++# If a disable-shared tag is given, we'll fallback to a static-only
++# configuration.  But we'll never go from static-only to shared-only.
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
++disable_libs=shared
++# ### END LIBTOOL TAG CONFIG: disable-shared
++
++# ### BEGIN LIBTOOL TAG CONFIG: disable-static
++disable_libs=static
++# ### END LIBTOOL TAG CONFIG: disable-static
+ 
+ # Local Variables:
+ # mode:shell-script
+diff -puriN SDL_gfx-2.0.13.old/Makefile.in SDL_gfx-2.0.13/Makefile.in
+--- SDL_gfx-2.0.13.old/Makefile.in	2004-12-21 14:48:16.000000000 +0100
++++ SDL_gfx-2.0.13/Makefile.in	2006-03-01 18:29:49.000000000 +0100
+@@ -1,6 +1,8 @@
+-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
++# Makefile.in generated by automake 1.9.6 from Makefile.am.
++# @configure_input@
+ 
+-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
++# 2003, 2004, 2005  Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+ # gives unlimited permission to copy and/or distribute it,
+ # with or without modifications, as long as this notice is preserved.
+@@ -10,84 +12,217 @@
+ # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+ 
+-# Makefile.am for the SDL_gfx library/DLL
++@SET_MAKE@
+ 
++# Makefile.am for the SDL_gfx library/DLL
+ 
+-SHELL = @SHELL@
+ 
+ srcdir = @srcdir@
+ top_srcdir = @top_srcdir@
+ VPATH = @srcdir@
+-prefix = @prefix@
+-exec_prefix = @exec_prefix@
+-
+-bindir = @bindir@
+-sbindir = @sbindir@
+-libexecdir = @libexecdir@
+-datadir = @datadir@
+-sysconfdir = @sysconfdir@
+-sharedstatedir = @sharedstatedir@
+-localstatedir = @localstatedir@
+-libdir = @libdir@
+-infodir = @infodir@
+-mandir = @mandir@
+-includedir = @includedir@
+-oldincludedir = /usr/include
+-
+-DESTDIR =
+-
+ pkgdatadir = $(datadir)/@PACKAGE@
+ pkglibdir = $(libdir)/@PACKAGE@
+ pkgincludedir = $(includedir)/@PACKAGE@
+-
+ top_builddir = .
+-
+-ACLOCAL = @ACLOCAL@
+-AUTOCONF = @AUTOCONF@
+-AUTOMAKE = @AUTOMAKE@
+-AUTOHEADER = @AUTOHEADER@
+-
++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+ INSTALL = @INSTALL@
+-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+-INSTALL_DATA = @INSTALL_DATA@
+-INSTALL_SCRIPT = @INSTALL_SCRIPT@
+-transform = @program_transform_name@
+-
++install_sh_DATA = $(install_sh) -c -m 644
++install_sh_PROGRAM = $(install_sh) -c
++install_sh_SCRIPT = $(install_sh) -c
++INSTALL_HEADER = $(INSTALL_DATA)
++transform = $(program_transform_name)
+ NORMAL_INSTALL = :
+ PRE_INSTALL = :
+ POST_INSTALL = :
+ NORMAL_UNINSTALL = :
+ PRE_UNINSTALL = :
+ POST_UNINSTALL = :
+-host_alias = @host_alias@
++build_triplet = @build@
+ host_triplet = @host@
++target_triplet = @target@
++DIST_COMMON = README $(am__configure_deps) \
++	$(libSDL_gfxinclude_HEADERS) $(srcdir)/Makefile.am \
++	$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
++	ChangeLog INSTALL NEWS config.guess config.sub depcomp \
++	install-sh ltmain.sh missing
++subdir = .
++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
++am__aclocal_m4_deps = $(top_srcdir)/configure.in
++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
++	$(ACLOCAL_M4)
++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
++ configure.lineno configure.status.lineno
++mkinstalldirs = $(install_sh) -d
++CONFIG_CLEAN_FILES =
++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
++am__vpath_adj = case $$p in \
++    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
++    *) f=$$p;; \
++  esac;
++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
++am__installdirs = "$(DESTDIR)$(libdir)" \
++	"$(DESTDIR)$(libSDL_gfxincludedir)"
++libLTLIBRARIES_INSTALL = $(INSTALL)
++LTLIBRARIES = $(lib_LTLIBRARIES)
++libSDL_gfx_la_LIBADD =
++am_libSDL_gfx_la_OBJECTS = SDL_gfxPrimitives.lo SDL_rotozoom.lo \
++	SDL_framerate.lo SDL_imageFilter.lo
++libSDL_gfx_la_OBJECTS = $(am_libSDL_gfx_la_OBJECTS)
++DEFAULT_INCLUDES = -I. -I$(srcdir)
++depcomp = $(SHELL) $(top_srcdir)/depcomp
++am__depfiles_maybe = depfiles
++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
++	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
++	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
++	$(AM_CFLAGS) $(CFLAGS)
++CCLD = $(CC)
++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
++	$(AM_LDFLAGS) $(LDFLAGS) -o $@
++SOURCES = $(libSDL_gfx_la_SOURCES)
++DIST_SOURCES = $(libSDL_gfx_la_SOURCES)
++libSDL_gfxincludeHEADERS_INSTALL = $(INSTALL_HEADER)
++HEADERS = $(libSDL_gfxinclude_HEADERS)
++ETAGS = etags
++CTAGS = ctags
++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
++distdir = $(PACKAGE)-$(VERSION)
++top_distdir = $(distdir)
++am__remove_distdir = \
++  { test ! -d $(distdir) \
++    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
++         && rm -fr $(distdir); }; }
++DIST_ARCHIVES = $(distdir).tar.gz
++GZIP_ENV = --best
++distuninstallcheck_listfiles = find . -type f -print
++distcleancheck_listfiles = find . -type f -print
++ACLOCAL = @ACLOCAL@
++AMDEP_FALSE = @AMDEP_FALSE@
++AMDEP_TRUE = @AMDEP_TRUE@
++AMTAR = @AMTAR@
++AR = @AR@
+ AS = @AS@
++AUTOCONF = @AUTOCONF@
++AUTOHEADER = @AUTOHEADER@
++AUTOMAKE = @AUTOMAKE@
++AWK = @AWK@
+ BINARY_AGE = @BINARY_AGE@
+ CC = @CC@
++CCDEPMODE = @CCDEPMODE@
++CFLAGS = @CFLAGS@
++CPP = @CPP@
++CPPFLAGS = @CPPFLAGS@
+ CXX = @CXX@
++CXXCPP = @CXXCPP@
++CXXDEPMODE = @CXXDEPMODE@
++CXXFLAGS = @CXXFLAGS@
++CYGPATH_W = @CYGPATH_W@
++DEFS = @DEFS@ -DBUILD_DLL
++DEPDIR = @DEPDIR@
+ DLLTOOL = @DLLTOOL@
++ECHO = @ECHO@
++ECHO_C = @ECHO_C@
++ECHO_N = @ECHO_N@
++ECHO_T = @ECHO_T@
++EGREP = @EGREP@
++EXEEXT = @EXEEXT@
++F77 = @F77@
++FFLAGS = @FFLAGS@
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+ INTERFACE_AGE = @INTERFACE_AGE@
++LDFLAGS = @LDFLAGS@
++LIBOBJS = @LIBOBJS@
++LIBS = @LIBS@
+ LIBTOOL = @LIBTOOL@
+ LN_S = @LN_S@
++LTLIBOBJS = @LTLIBOBJS@
+ LT_AGE = @LT_AGE@
+ LT_CURRENT = @LT_CURRENT@
+ LT_RELEASE = @LT_RELEASE@
+ LT_REVISION = @LT_REVISION@
++MAINT = @MAINT@
++MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
++MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+ MAJOR_VERSION = @MAJOR_VERSION@
+ MAKEINFO = @MAKEINFO@
+ MATHLIB = @MATHLIB@
+ MICRO_VERSION = @MICRO_VERSION@
+ MINOR_VERSION = @MINOR_VERSION@
+ OBJDUMP = @OBJDUMP@
++OBJEXT = @OBJEXT@
+ PACKAGE = @PACKAGE@
++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
++PACKAGE_NAME = @PACKAGE_NAME@
++PACKAGE_STRING = @PACKAGE_STRING@
++PACKAGE_TARNAME = @PACKAGE_TARNAME@
++PACKAGE_VERSION = @PACKAGE_VERSION@
++PATH_SEPARATOR = @PATH_SEPARATOR@
+ RANLIB = @RANLIB@
+ SDL_CFLAGS = @SDL_CFLAGS@
+ SDL_CONFIG = @SDL_CONFIG@
+ SDL_LIBS = @SDL_LIBS@
++SET_MAKE = @SET_MAKE@
++SHELL = @SHELL@
++STRIP = @STRIP@
+ VERSION = @VERSION@
+-
++X_CFLAGS = @X_CFLAGS@
++X_EXTRA_LIBS = @X_EXTRA_LIBS@
++X_LIBS = @X_LIBS@
++X_PRE_LIBS = @X_PRE_LIBS@
++ac_ct_AR = @ac_ct_AR@
++ac_ct_AS = @ac_ct_AS@
++ac_ct_CC = @ac_ct_CC@
++ac_ct_CXX = @ac_ct_CXX@
++ac_ct_DLLTOOL = @ac_ct_DLLTOOL@
++ac_ct_F77 = @ac_ct_F77@
++ac_ct_OBJDUMP = @ac_ct_OBJDUMP@
++ac_ct_RANLIB = @ac_ct_RANLIB@
++ac_ct_STRIP = @ac_ct_STRIP@
++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
++am__include = @am__include@
++am__leading_dot = @am__leading_dot@
++am__quote = @am__quote@
++am__tar = @am__tar@
++am__untar = @am__untar@
++bindir = @bindir@
++build = @build@
++build_alias = @build_alias@
++build_cpu = @build_cpu@
++build_os = @build_os@
++build_vendor = @build_vendor@
++datadir = @datadir@
++exec_prefix = @exec_prefix@
++host = @host@
++host_alias = @host_alias@
++host_cpu = @host_cpu@
++host_os = @host_os@
++host_vendor = @host_vendor@
++includedir = @includedir@
++infodir = @infodir@
++install_sh = @install_sh@
++libdir = @libdir@
++libexecdir = @libexecdir@
++localstatedir = @localstatedir@
++mandir = @mandir@
++mkdir_p = @mkdir_p@
++oldincludedir = @oldincludedir@
++prefix = @prefix@
++program_transform_name = @program_transform_name@
++sbindir = @sbindir@
++sharedstatedir = @sharedstatedir@
++sysconfdir = @sysconfdir@
++target = @target@
++target_alias = @target_alias@
++target_cpu = @target_cpu@
++target_os = @target_os@
++target_vendor = @target_vendor@
+ lib_LTLIBRARIES = libSDL_gfx.la
+-
+ libSDL_gfxincludedir = $(includedir)/SDL
+ libSDL_gfxinclude_HEADERS = \
+ 	SDL_gfxPrimitives.h	\
+@@ -96,121 +231,114 @@ libSDL_gfxinclude_HEADERS = \
+ 	SDL_framerate.h \
+ 	SDL_imageFilter.h
+ 
+-
+ libSDL_gfx_la_SOURCES = \
+ 	SDL_gfxPrimitives.c	\
+ 	SDL_rotozoom.c	\
+ 	SDL_framerate.c \
+ 	SDL_imageFilter.c
+ 
+-
+-DEFS = @DEFS@ -DBUILD_DLL
+ libSDL_gfx_la_LDFLAGS = \
+ 	-version-info $(LT_CURRENT):$(LT_REVISION):$(LT_AGE)
+ 
+-
+ DISTCLEANFILES = *~ *~c *~h *.cross.cache inc
+-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+-CONFIG_CLEAN_FILES = 
+-LTLIBRARIES =  $(lib_LTLIBRARIES)
+-
+-CPPFLAGS = @CPPFLAGS@
+-LDFLAGS = @LDFLAGS@
+-LIBS = @LIBS@
+-X_CFLAGS = @X_CFLAGS@
+-X_LIBS = @X_LIBS@
+-X_EXTRA_LIBS = @X_EXTRA_LIBS@
+-X_PRE_LIBS = @X_PRE_LIBS@
+-libSDL_gfx_la_LIBADD = 
+-libSDL_gfx_la_OBJECTS =  SDL_gfxPrimitives.lo SDL_rotozoom.lo \
+-SDL_framerate.lo SDL_imageFilter.lo
+-CFLAGS = @CFLAGS@
+-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+-CCLD = $(CC)
+-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+-HEADERS =  $(libSDL_gfxinclude_HEADERS)
+-
+-DIST_COMMON =  README AUTHORS COPYING ChangeLog INSTALL Makefile.am \
+-Makefile.in NEWS acinclude.m4 aclocal.m4 config.guess config.sub \
+-configure configure.in install-sh ltconfig ltmain.sh missing \
+-mkinstalldirs
++all: all-am
+ 
+-
+-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+-
+-TAR = gtar
+-GZIP_ENV = --best
+-DEP_FILES =  .deps/SDL_framerate.P .deps/SDL_gfxPrimitives.P \
+-.deps/SDL_imageFilter.P .deps/SDL_rotozoom.P
+-SOURCES = $(libSDL_gfx_la_SOURCES)
+-OBJECTS = $(libSDL_gfx_la_OBJECTS)
+-
+-all: all-redirect
+ .SUFFIXES:
+-.SUFFIXES: .S .c .lo .o .s
+-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
+-	cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile
+-
+-Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status $(BUILT_SOURCES)
+-	cd $(top_builddir) \
+-	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+-
+-$(ACLOCAL_M4):  configure.in  acinclude.m4
+-	cd $(srcdir) && $(ACLOCAL)
++.SUFFIXES: .c .lo .o .obj
++am--refresh:
++	@:
++$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
++	@for dep in $?; do \
++	  case '$(am__configure_deps)' in \
++	    *$$dep*) \
++	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
++	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
++		&& exit 0; \
++	      exit 1;; \
++	  esac; \
++	done; \
++	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
++	cd $(top_srcdir) && \
++	  $(AUTOMAKE) --gnu  Makefile
++.PRECIOUS: Makefile
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++	@case '$?' in \
++	  *config.status*) \
++	    echo ' $(SHELL) ./config.status'; \
++	    $(SHELL) ./config.status;; \
++	  *) \
++	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
++	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
++	esac;
+ 
+-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ 	$(SHELL) ./config.status --recheck
+-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+-	cd $(srcdir) && $(AUTOCONF)
+-
+-mostlyclean-libLTLIBRARIES:
+-
+-clean-libLTLIBRARIES:
+-	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+-
+-distclean-libLTLIBRARIES:
+-
+-maintainer-clean-libLTLIBRARIES:
+ 
++$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
++	cd $(srcdir) && $(AUTOCONF)
++$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
++	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+ install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ 	@$(NORMAL_INSTALL)
+-	$(mkinstalldirs) $(DESTDIR)$(libdir)
++	test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)"
+ 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ 	  if test -f $$p; then \
+-	    echo "$(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \
+-	    $(LIBTOOL)  --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \
++	    f=$(am__strip_dir) \
++	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
++	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+ 	  else :; fi; \
+ 	done
+ 
+ uninstall-libLTLIBRARIES:
+ 	@$(NORMAL_UNINSTALL)
+-	list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+-	  $(LIBTOOL)  --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
++	@set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \
++	  p=$(am__strip_dir) \
++	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
++	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+ 	done
+ 
+-.s.o:
+-	$(COMPILE) -c $<
+-
+-.S.o:
+-	$(COMPILE) -c $<
++clean-libLTLIBRARIES:
++	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
++	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
++	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
++	  test "$$dir" != "$$p" || dir=.; \
++	  echo "rm -f \"$${dir}/so_locations\""; \
++	  rm -f "$${dir}/so_locations"; \
++	done
++libSDL_gfx.la: $(libSDL_gfx_la_OBJECTS) $(libSDL_gfx_la_DEPENDENCIES) 
++	$(LINK) -rpath $(libdir) $(libSDL_gfx_la_LDFLAGS) $(libSDL_gfx_la_OBJECTS) $(libSDL_gfx_la_LIBADD) $(LIBS)
+ 
+ mostlyclean-compile:
+-	-rm -f *.o core *.core
+-
+-clean-compile:
++	-rm -f *.$(OBJEXT)
+ 
+ distclean-compile:
+ 	-rm -f *.tab.c
+ 
+-maintainer-clean-compile:
+-
+-.s.lo:
+-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+-.S.lo:
+-	$(LIBTOOL) --mode=compile $(COMPILE) -c $<
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SDL_framerate.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SDL_gfxPrimitives.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SDL_imageFilter.Plo@am__quote@
++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SDL_rotozoom.Plo@am__quote@
++
++.c.o:
++@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(COMPILE) -c $<
++
++.c.obj:
++@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
++
++.c.lo:
++@am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
++@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
++@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
++@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+ 
+ mostlyclean-libtool:
+ 	-rm -f *.lo
+@@ -219,223 +347,302 @@ clean-libtool:
+ 	-rm -rf .libs _libs
+ 
+ distclean-libtool:
+-
+-maintainer-clean-libtool:
+-
+-libSDL_gfx.la: $(libSDL_gfx_la_OBJECTS) $(libSDL_gfx_la_DEPENDENCIES)
+-	$(LINK) -rpath $(libdir) $(libSDL_gfx_la_LDFLAGS) $(libSDL_gfx_la_OBJECTS) $(libSDL_gfx_la_LIBADD) $(LIBS)
+-
++	-rm -f libtool
++uninstall-info-am:
+ install-libSDL_gfxincludeHEADERS: $(libSDL_gfxinclude_HEADERS)
+ 	@$(NORMAL_INSTALL)
+-	$(mkinstalldirs) $(DESTDIR)$(libSDL_gfxincludedir)
++	test -z "$(libSDL_gfxincludedir)" || $(mkdir_p) "$(DESTDIR)$(libSDL_gfxincludedir)"
+ 	@list='$(libSDL_gfxinclude_HEADERS)'; for p in $$list; do \
+-	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
+-	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(libSDL_gfxincludedir)/$$p"; \
+-	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(libSDL_gfxincludedir)/$$p; \
++	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
++	  f=$(am__strip_dir) \
++	  echo " $(libSDL_gfxincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libSDL_gfxincludedir)/$$f'"; \
++	  $(libSDL_gfxincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libSDL_gfxincludedir)/$$f"; \
+ 	done
+ 
+ uninstall-libSDL_gfxincludeHEADERS:
+ 	@$(NORMAL_UNINSTALL)
+-	list='$(libSDL_gfxinclude_HEADERS)'; for p in $$list; do \
+-	  rm -f $(DESTDIR)$(libSDL_gfxincludedir)/$$p; \
++	@list='$(libSDL_gfxinclude_HEADERS)'; for p in $$list; do \
++	  f=$(am__strip_dir) \
++	  echo " rm -f '$(DESTDIR)$(libSDL_gfxincludedir)/$$f'"; \
++	  rm -f "$(DESTDIR)$(libSDL_gfxincludedir)/$$f"; \
+ 	done
+ 
++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
++	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
++	unique=`for i in $$list; do \
++	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++	  done | \
++	  $(AWK) '    { files[$$0] = 1; } \
++	       END { for (i in files) print i; }'`; \
++	mkid -fID $$unique
+ tags: TAGS
+ 
+-ID: $(HEADERS) $(SOURCES) $(LISP)
+-	list='$(SOURCES) $(HEADERS)'; \
+-	unique=`for i in $$list; do echo $$i; done | \
+-	  awk '    { files[$$0] = 1; } \
++TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
++		$(TAGS_FILES) $(LISP)
++	tags=; \
++	here=`pwd`; \
++	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
++	unique=`for i in $$list; do \
++	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++	  done | \
++	  $(AWK) '    { files[$$0] = 1; } \
+ 	       END { for (i in files) print i; }'`; \
+-	here=`pwd` && cd $(srcdir) \
+-	  && mkid -f$$here/ID $$unique $(LISP)
+-
+-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
++	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
++	  test -n "$$unique" || unique=$$empty_fix; \
++	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
++	    $$tags $$unique; \
++	fi
++ctags: CTAGS
++CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
++		$(TAGS_FILES) $(LISP)
+ 	tags=; \
+ 	here=`pwd`; \
+-	list='$(SOURCES) $(HEADERS)'; \
+-	unique=`for i in $$list; do echo $$i; done | \
+-	  awk '    { files[$$0] = 1; } \
++	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
++	unique=`for i in $$list; do \
++	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
++	  done | \
++	  $(AWK) '    { files[$$0] = 1; } \
+ 	       END { for (i in files) print i; }'`; \
+-	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+-	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)
+-
+-mostlyclean-tags:
+-
+-clean-tags:
++	test -z "$(CTAGS_ARGS)$$tags$$unique" \
++	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
++	     $$tags $$unique
++
++GTAGS:
++	here=`$(am__cd) $(top_builddir) && pwd` \
++	  && cd $(top_srcdir) \
++	  && gtags -i $(GTAGS_ARGS) $$here
+ 
+ distclean-tags:
+-	-rm -f TAGS ID
+-
+-maintainer-clean-tags:
++	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ 
+-distdir = $(PACKAGE)-$(VERSION)
+-top_distdir = $(distdir)
++distdir: $(DISTFILES)
++	$(am__remove_distdir)
++	mkdir $(distdir)
++	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
++	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
++	list='$(DISTFILES)'; for file in $$list; do \
++	  case $$file in \
++	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
++	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
++	  esac; \
++	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
++	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
++	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
++	    dir="/$$dir"; \
++	    $(mkdir_p) "$(distdir)$$dir"; \
++	  else \
++	    dir=''; \
++	  fi; \
++	  if test -d $$d/$$file; then \
++	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
++	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
++	    fi; \
++	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
++	  else \
++	    test -f $(distdir)/$$file \
++	    || cp -p $$d/$$file $(distdir)/$$file \
++	    || exit 1; \
++	  fi; \
++	done
++	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
++	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
++	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
++	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
++	|| chmod -R a+r $(distdir)
++dist-gzip: distdir
++	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++	$(am__remove_distdir)
++
++dist-bzip2: distdir
++	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
++	$(am__remove_distdir)
++
++dist-tarZ: distdir
++	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
++	$(am__remove_distdir)
++
++dist-shar: distdir
++	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
++	$(am__remove_distdir)
++
++dist-zip: distdir
++	-rm -f $(distdir).zip
++	zip -rq $(distdir).zip $(distdir)
++	$(am__remove_distdir)
++
++dist dist-all: distdir
++	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
++	$(am__remove_distdir)
+ 
+ # This target untars the dist file and tries a VPATH configuration.  Then
+ # it guarantees that the distribution is self-contained by making another
+ # tarfile.
+ distcheck: dist
+-	-rm -rf $(distdir)
+-	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+-	mkdir $(distdir)/=build
+-	mkdir $(distdir)/=inst
+-	dc_install_base=`cd $(distdir)/=inst && pwd`; \
+-	cd $(distdir)/=build \
+-	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
++	case '$(DIST_ARCHIVES)' in \
++	*.tar.gz*) \
++	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
++	*.tar.bz2*) \
++	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
++	*.tar.Z*) \
++	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
++	*.shar.gz*) \
++	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
++	*.zip*) \
++	  unzip $(distdir).zip ;;\
++	esac
++	chmod -R a-w $(distdir); chmod a+w $(distdir)
++	mkdir $(distdir)/_build
++	mkdir $(distdir)/_inst
++	chmod a-w $(distdir)
++	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
++	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
++	  && cd $(distdir)/_build \
++	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
++	    $(DISTCHECK_CONFIGURE_FLAGS) \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) check \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) install \
+ 	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+-	  && $(MAKE) $(AM_MAKEFLAGS) dist
+-	-rm -rf $(distdir)
+-	@banner="$(distdir).tar.gz is ready for distribution"; \
+-	dashes=`echo "$$banner" | sed s/./=/g`; \
+-	echo "$$dashes"; \
+-	echo "$$banner"; \
+-	echo "$$dashes"
+-dist: distdir
+-	-chmod -R a+r $(distdir)
+-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+-	-rm -rf $(distdir)
+-dist-all: distdir
+-	-chmod -R a+r $(distdir)
+-	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+-	-rm -rf $(distdir)
+-distdir: $(DISTFILES)
+-	-rm -rf $(distdir)
+-	mkdir $(distdir)
+-	-chmod 777 $(distdir)
+-	here=`cd $(top_builddir) && pwd`; \
+-	top_distdir=`cd $(distdir) && pwd`; \
+-	distdir=`cd $(distdir) && pwd`; \
+-	cd $(top_srcdir) \
+-	  && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --foreign Makefile
+-	@for file in $(DISTFILES); do \
+-	  d=$(srcdir); \
+-	  if test -d $$d/$$file; then \
+-	    cp -pr $$d/$$file $(distdir)/$$file; \
+-	  else \
+-	    test -f $(distdir)/$$file \
+-	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+-	    || cp -p $$d/$$file $(distdir)/$$file || :; \
+-	  fi; \
+-	done
+-
+-DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+-
+--include $(DEP_FILES)
+-
+-mostlyclean-depend:
+-
+-clean-depend:
+-
+-distclean-depend:
+-	-rm -rf .deps
+-
+-maintainer-clean-depend:
+-
+-%.o: %.c
+-	@echo '$(COMPILE) -c $<'; \
+-	$(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+-	@-cp .deps/$(*F).pp .deps/$(*F).P; \
+-	tr ' ' '\012' < .deps/$(*F).pp \
+-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+-	    >> .deps/$(*F).P; \
+-	rm .deps/$(*F).pp
+-
+-%.lo: %.c
+-	@echo '$(LTCOMPILE) -c $<'; \
+-	$(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+-	@-sed -e 's/^\([^:]*\)\.o[ 	]*:/\1.lo \1.o :/' \
+-	  < .deps/$(*F).pp > .deps/$(*F).P; \
+-	tr ' ' '\012' < .deps/$(*F).pp \
+-	  | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+-	    >> .deps/$(*F).P; \
+-	rm -f .deps/$(*F).pp
+-info-am:
+-info: info-am
+-dvi-am:
+-dvi: dvi-am
++	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
++	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
++	        distuninstallcheck \
++	  && chmod -R a-w "$$dc_install_base" \
++	  && ({ \
++	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
++	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
++	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
++	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
++	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
++	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
++	  && rm -rf "$$dc_destdir" \
++	  && $(MAKE) $(AM_MAKEFLAGS) dist \
++	  && rm -rf $(DIST_ARCHIVES) \
++	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
++	$(am__remove_distdir)
++	@(echo "$(distdir) archives ready for distribution: "; \
++	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
++	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
++distuninstallcheck:
++	@cd $(distuninstallcheck_dir) \
++	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
++	   || { echo "ERROR: files left after uninstall:" ; \
++	        if test -n "$(DESTDIR)"; then \
++	          echo "  (check DESTDIR support)"; \
++	        fi ; \
++	        $(distuninstallcheck_listfiles) ; \
++	        exit 1; } >&2
++distcleancheck: distclean
++	@if test '$(srcdir)' = . ; then \
++	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
++	  exit 1 ; \
++	fi
++	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
++	  || { echo "ERROR: files left in build directory after distclean:" ; \
++	       $(distcleancheck_listfiles) ; \
++	       exit 1; } >&2
+ check-am: all-am
+ check: check-am
+-installcheck-am:
+-installcheck: installcheck-am
+-install-exec-am: install-libLTLIBRARIES
++all-am: Makefile $(LTLIBRARIES) $(HEADERS)
++installdirs:
++	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libSDL_gfxincludedir)"; do \
++	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
++	done
++install: install-am
+ install-exec: install-exec-am
+-
+-install-data-am: install-libSDL_gfxincludeHEADERS
+ install-data: install-data-am
++uninstall: uninstall-am
+ 
+ install-am: all-am
+ 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+-install: install-am
+-uninstall-am: uninstall-libLTLIBRARIES \
+-		uninstall-libSDL_gfxincludeHEADERS
+-uninstall: uninstall-am
+-all-am: Makefile $(LTLIBRARIES) $(HEADERS)
+-all-redirect: all-am
+-install-strip:
+-	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+-installdirs:
+-	$(mkinstalldirs)  $(DESTDIR)$(libdir) $(DESTDIR)$(libSDL_gfxincludedir)
+-
+ 
++installcheck: installcheck-am
++install-strip:
++	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
++	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
++	  `test -z '$(STRIP)' || \
++	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ mostlyclean-generic:
+ 
+ clean-generic:
+ 
+ distclean-generic:
+-	-rm -f Makefile $(CONFIG_CLEAN_FILES)
+-	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
++	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ 	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+ 
+ maintainer-clean-generic:
+-mostlyclean-am:  mostlyclean-libLTLIBRARIES mostlyclean-compile \
+-		mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+-		mostlyclean-generic
++	@echo "This command is intended for maintainers to use"
++	@echo "it deletes files that may require special tools to rebuild."
++clean: clean-am
+ 
+-mostlyclean: mostlyclean-am
++clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
++	mostlyclean-am
+ 
+-clean-am:  clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+-		clean-depend clean-generic mostlyclean-am
++distclean: distclean-am
++	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
++	-rm -rf ./$(DEPDIR)
++	-rm -f Makefile
++distclean-am: clean-am distclean-compile distclean-generic \
++	distclean-libtool distclean-tags
+ 
+-clean: clean-am
++dvi: dvi-am
+ 
+-distclean-am:  distclean-libLTLIBRARIES distclean-compile \
+-		distclean-libtool distclean-tags distclean-depend \
+-		distclean-generic clean-am
+-	-rm -f libtool
++dvi-am:
+ 
+-distclean: distclean-am
+-	-rm -f config.status
++html: html-am
+ 
+-maintainer-clean-am:  maintainer-clean-libLTLIBRARIES \
+-		maintainer-clean-compile maintainer-clean-libtool \
+-		maintainer-clean-tags maintainer-clean-depend \
+-		maintainer-clean-generic distclean-am
+-	@echo "This command is intended for maintainers to use;"
+-	@echo "it deletes files that may require special tools to rebuild."
++info: info-am
++
++info-am:
++
++install-data-am: install-libSDL_gfxincludeHEADERS
++
++install-exec-am: install-libLTLIBRARIES
++
++install-info: install-info-am
++
++install-man:
++
++installcheck-am:
+ 
+ maintainer-clean: maintainer-clean-am
+-	-rm -f config.status
++	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
++	-rm -rf $(top_srcdir)/autom4te.cache
++	-rm -rf ./$(DEPDIR)
++	-rm -f Makefile
++maintainer-clean-am: distclean-am maintainer-clean-generic
++
++mostlyclean: mostlyclean-am
++
++mostlyclean-am: mostlyclean-compile mostlyclean-generic \
++	mostlyclean-libtool
++
++pdf: pdf-am
++
++pdf-am:
+ 
+-.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
+-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
+-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
+-distclean-compile clean-compile maintainer-clean-compile \
+-mostlyclean-libtool distclean-libtool clean-libtool \
+-maintainer-clean-libtool uninstall-libSDL_gfxincludeHEADERS \
+-install-libSDL_gfxincludeHEADERS tags mostlyclean-tags distclean-tags \
+-clean-tags maintainer-clean-tags distdir mostlyclean-depend \
+-distclean-depend clean-depend maintainer-clean-depend info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++ps: ps-am
+ 
++ps-am:
++
++uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES \
++	uninstall-libSDL_gfxincludeHEADERS
++
++.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
++	clean-generic clean-libLTLIBRARIES clean-libtool ctags dist \
++	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
++	distcheck distclean distclean-compile distclean-generic \
++	distclean-libtool distclean-tags distcleancheck distdir \
++	distuninstallcheck dvi dvi-am html html-am info info-am \
++	install install-am install-data install-data-am install-exec \
++	install-exec-am install-info install-info-am \
++	install-libLTLIBRARIES install-libSDL_gfxincludeHEADERS \
++	install-man install-strip installcheck installcheck-am \
++	installdirs maintainer-clean maintainer-clean-generic \
++	mostlyclean mostlyclean-compile mostlyclean-generic \
++	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
++	uninstall-am uninstall-info-am uninstall-libLTLIBRARIES \
++	uninstall-libSDL_gfxincludeHEADERS
+ 
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+diff -puriN SDL_gfx-2.0.13.old/missing SDL_gfx-2.0.13/missing
+--- SDL_gfx-2.0.13.old/missing	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/missing	2006-03-01 18:29:49.000000000 +0100
+@@ -1,6 +1,10 @@
+ #! /bin/sh
+ # Common stub for a few missing GNU programs while installing.
+-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
++
++scriptversion=2005-06-08.21
++
++# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
++#   Free Software Foundation, Inc.
+ # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+ 
+ # This program is free software; you can redistribute it and/or modify
+@@ -15,8 +19,8 @@
+ 
+ # You should have received a copy of the GNU General Public License
+ # along with this program; if not, write to the Free Software
+-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+-# 02111-1307, USA.
++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
++# 02110-1301, USA.
+ 
+ # As a special exception to the GNU General Public License, if you
+ # distribute this file as part of a program that contains a
+@@ -38,18 +42,24 @@ else
+   configure_ac=configure.in
+ fi
+ 
++msg="missing on your system"
++
+ case "$1" in
+ --run)
+   # Try to run requested program, and just exit if it succeeds.
+   run=
+   shift
+   "$@" && exit 0
++  # Exit code 63 means version mismatch.  This often happens
++  # when the user try to use an ancient version of a tool on
++  # a file that requires a minimum version.  In this case we
++  # we should proceed has if the program had been absent, or
++  # if --run hadn't been passed.
++  if test $? = 63; then
++    run=:
++    msg="probably too old"
++  fi
+   ;;
+-esac
+-
+-# If it does not exist, or fails to run (possibly an outdated version),
+-# try to emulate it.
+-case "$1" in
+ 
+   -h|--h|--he|--hel|--help)
+     echo "\
+@@ -74,11 +84,15 @@ Supported PROGRAM values:
+   lex          create \`lex.yy.c', if possible, from existing .c
+   makeinfo     touch the output file
+   tar          try tar, gnutar, gtar, then tar without non-portable flags
+-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
++  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
++
++Send bug reports to <bug-automake@gnu.org>."
++    exit $?
+     ;;
+ 
+   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+-    echo "missing 0.4 - GNU automake"
++    echo "missing $scriptversion (GNU Automake)"
++    exit $?
+     ;;
+ 
+   -*)
+@@ -87,14 +101,44 @@ Supported PROGRAM values:
+     exit 1
+     ;;
+ 
+-  aclocal*)
++esac
++
++# Now exit if we have it, but it failed.  Also exit now if we
++# don't have it and --version was passed (most likely to detect
++# the program).
++case "$1" in
++  lex|yacc)
++    # Not GNU programs, they don't have --version.
++    ;;
++
++  tar)
++    if test -n "$run"; then
++       echo 1>&2 "ERROR: \`tar' requires --run"
++       exit 1
++    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++       exit 1
++    fi
++    ;;
++
++  *)
+     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+        # We have it, but it failed.
+        exit 1
++    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
++       # Could not run --version or --help.  This is probably someone
++       # running `$TOOL --version' or `$TOOL --help' to check whether
++       # $TOOL exists and not knowing $TOOL uses missing.
++       exit 1
+     fi
++    ;;
++esac
+ 
++# If it does not exist, or fails to run (possibly an outdated version),
++# try to emulate it.
++case "$1" in
++  aclocal*)
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+          to install the \`Automake' and \`Perl' packages.  Grab them from
+          any GNU archive site."
+@@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system
+     ;;
+ 
+   autoconf)
+-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+-       # We have it, but it failed.
+-       exit 1
+-    fi
+-
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+          you modified \`${configure_ac}'.  You might want to install the
+          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+          archive site."
+@@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system
+     ;;
+ 
+   autoheader)
+-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+-       # We have it, but it failed.
+-       exit 1
+-    fi
+-
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+          from any GNU archive site."
+@@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system
+     ;;
+ 
+   automake*)
+-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+-       # We have it, but it failed.
+-       exit 1
+-    fi
+-
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+          You might want to install the \`Automake' and \`Perl' packages.
+          Grab them from any GNU archive site."
+@@ -156,16 +185,11 @@ WARNING: \`$1' is missing on your system
+     ;;
+ 
+   autom4te)
+-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+-       # We have it, but it failed.
+-       exit 1
+-    fi
+-
+     echo 1>&2 "\
+-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+-         system.  You might have modified some files without having the
++WARNING: \`$1' is needed, but is $msg.
++         You might have modified some files without having the
+          proper tools for further handling them.
+-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
++         You can get \`$1' as part of \`Autoconf' from any GNU
+          archive site."
+ 
+     file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+@@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not
+ 
+   bison|yacc)
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' $msg.  You should only need it if
+          you modified a \`.y' file.  You may need the \`Bison' package
+          in order for those modifications to take effect.  You can get
+          \`Bison' from any GNU archive site."
+@@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system
+ 
+   lex|flex)
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+          you modified a \`.l' file.  You may need the \`Flex' package
+          in order for those modifications to take effect.  You can get
+          \`Flex' from any GNU archive site."
+@@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system
+     ;;
+ 
+   help2man)
+-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+-       # We have it, but it failed.
+-       exit 1
+-    fi
+-
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+ 	 you modified a dependency of a manual page.  You may need the
+ 	 \`Help2man' package in order for those modifications to take
+ 	 effect.  You can get \`Help2man' from any GNU archive site."
+@@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system
+     ;;
+ 
+   makeinfo)
+-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+-       # We have makeinfo, but it failed.
+-       exit 1
+-    fi
+-
+     echo 1>&2 "\
+-WARNING: \`$1' is missing on your system.  You should only need it if
++WARNING: \`$1' is $msg.  You should only need it if
+          you modified a \`.texi' or \`.texinfo' file, or any other file
+          indirectly affecting the aspect of the manual.  The spurious
+          call might also be the consequence of using a buggy \`make' (AIX,
+          DU, IRIX).  You might want to install the \`Texinfo' package or
+          the \`GNU make' package.  Grab either from any GNU archive site."
++    # The file to touch is that specified with -o ...
+     file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+     if test -z "$file"; then
+-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+-    fi
++      # ... or it is the one specified with @setfilename ...
++      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
++      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
++      # ... or it is derived from the source name (dir/f.texi becomes f.info)
++      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
++    fi
++    # If the file does not exist, the user really needs makeinfo;
++    # let's fail without touching anything.
++    test -f $file || exit 1
+     touch $file
+     ;;
+ 
+   tar)
+     shift
+-    if test -n "$run"; then
+-      echo 1>&2 "ERROR: \`tar' requires --run"
+-      exit 1
+-    fi
+ 
+     # We have already tried tar in the generic part.
+     # Look for gnutar/gtar before invocation to avoid ugly error
+@@ -323,10 +340,10 @@ WARNING: I can't seem to be able to run 
+ 
+   *)
+     echo 1>&2 "\
+-WARNING: \`$1' is needed, and you do not seem to have it handy on your
+-         system.  You might have modified some files without having the
++WARNING: \`$1' is needed, and is $msg.
++         You might have modified some files without having the
+          proper tools for further handling them.  Check the \`README' file,
+-         it often tells you about the needed prerequirements for installing
++         it often tells you about the needed prerequisites for installing
+          this package.  You may also peek at any GNU archive site, in case
+          some other package would contain this missing \`$1' program."
+     exit 1
+@@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not
+ esac
+ 
+ exit 0
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "scriptversion="
++# time-stamp-format: "%:y-%02m-%02d.%02H"
++# time-stamp-end: "$"
++# End:
+diff -puriN SDL_gfx-2.0.13.old/mkinstalldirs SDL_gfx-2.0.13/mkinstalldirs
+--- SDL_gfx-2.0.13.old/mkinstalldirs	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/mkinstalldirs	1970-01-01 01:00:00.000000000 +0100
+@@ -1,40 +0,0 @@
+-#! /bin/sh
+-# mkinstalldirs --- make directory hierarchy
+-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+-# Created: 1993-05-16
+-# Public domain
+-
+-# $Id: mkinstalldirs,v 1.1.1.1 2000/08/10 06:06:14 hercules Exp $
+-
+-errstatus=0
+-
+-for file
+-do
+-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+-   shift
+-
+-   pathcomp=
+-   for d
+-   do
+-     pathcomp="$pathcomp$d"
+-     case "$pathcomp" in
+-       -* ) pathcomp=./$pathcomp ;;
+-     esac
+-
+-     if test ! -d "$pathcomp"; then
+-        echo "mkdir $pathcomp"
+-
+-        mkdir "$pathcomp" || lasterr=$?
+-
+-        if test ! -d "$pathcomp"; then
+-  	  errstatus=$lasterr
+-        fi
+-     fi
+-
+-     pathcomp="$pathcomp/"
+-   done
+-done
+-
+-exit $errstatus
+-
+-# mkinstalldirs ends here
--- sdlgfx-2.0.13.orig/debian/patches/010_test_am_maintainer_mode.diff
+++ sdlgfx-2.0.13/debian/patches/010_test_am_maintainer_mode.diff
@@ -0,0 +1,11 @@
+diff -puriN SDL_gfx-2.0.13.orig/Test/configure.in SDL_gfx-2.0.13/Test/configure.in
+--- SDL_gfx-2.0.13.orig/Test/configure.in	2004-11-29 15:39:38.000000000 +0100
++++ SDL_gfx-2.0.13/Test/configure.in	2006-03-01 18:33:41.000000000 +0100
+@@ -3,6 +3,7 @@ AC_INIT(TestGfxPrimitives.c)
+ 
+ dnl Setup for automake
+ AM_INIT_AUTOMAKE(TestGfxPrimitives, 1.0)
++AM_MAINTAINER_MODE
+ 
+ dnl SDL version required
+ SDL_VERSION=1.2.0
--- sdlgfx-2.0.13.orig/debian/patches/011_test_rebootstrap.diff
+++ sdlgfx-2.0.13/debian/patches/011_test_rebootstrap.diff
@@ -0,0 +1,40482 @@
+diff -puriN SDL_gfx-2.0.13.orig/Test/aclocal.m4 SDL_gfx-2.0.13/Test/aclocal.m4
+--- SDL_gfx-2.0.13.orig/Test/aclocal.m4	2004-12-21 14:49:59.000000000 +0100
++++ SDL_gfx-2.0.13/Test/aclocal.m4	2006-03-01 18:34:40.000000000 +0100
+@@ -1,14 +1,6420 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.4-p6
++# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+ 
+-dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+-dnl This file is free software; the Free Software Foundation
+-dnl gives unlimited permission to copy and/or distribute it,
+-dnl with or without modifications, as long as this notice is preserved.
+-
+-dnl This program is distributed in the hope that it will be useful,
+-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+-dnl PARTICULAR PURPOSE.
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
++# 2005  Free Software Foundation, Inc.
++# This file is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
++
++# serial 48 Debian 1.5.22-2 AC_PROG_LIBTOOL
++
++
++# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
++# -----------------------------------------------------------
++# If this macro is not defined by Autoconf, define it here.
++m4_ifdef([AC_PROVIDE_IFELSE],
++         [],
++         [m4_define([AC_PROVIDE_IFELSE],
++	         [m4_ifdef([AC_PROVIDE_$1],
++		           [$2], [$3])])])
++
++
++# AC_PROG_LIBTOOL
++# ---------------
++AC_DEFUN([AC_PROG_LIBTOOL],
++[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
++dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
++dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
++  AC_PROVIDE_IFELSE([AC_PROG_CXX],
++    [AC_LIBTOOL_CXX],
++    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
++  ])])
++dnl And a similar setup for Fortran 77 support
++  AC_PROVIDE_IFELSE([AC_PROG_F77],
++    [AC_LIBTOOL_F77],
++    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
++])])
++
++dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
++dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
++dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
++  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
++    [AC_LIBTOOL_GCJ],
++    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
++      [AC_LIBTOOL_GCJ],
++      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
++	[AC_LIBTOOL_GCJ],
++      [ifdef([AC_PROG_GCJ],
++	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++       ifdef([A][M_PROG_GCJ],
++	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
++       ifdef([LT_AC_PROG_GCJ],
++	     [define([LT_AC_PROG_GCJ],
++		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
++])])# AC_PROG_LIBTOOL
++
++
++# _AC_PROG_LIBTOOL
++# ----------------
++AC_DEFUN([_AC_PROG_LIBTOOL],
++[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
++AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
++
++# This can be used to rebuild libtool when needed
++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
++
++# Always use our own libtool.
++LIBTOOL='$(SHELL) $(top_builddir)/libtool'
++AC_SUBST(LIBTOOL)dnl
++
++# Prevent multiple expansion
++define([AC_PROG_LIBTOOL], [])
++])# _AC_PROG_LIBTOOL
++
++
++# AC_LIBTOOL_SETUP
++# ----------------
++AC_DEFUN([AC_LIBTOOL_SETUP],
++[AC_PREREQ(2.50)dnl
++AC_REQUIRE([AC_ENABLE_SHARED])dnl
++AC_REQUIRE([AC_ENABLE_STATIC])dnl
++AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
++AC_REQUIRE([AC_CANONICAL_HOST])dnl
++AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([AC_PROG_CC])dnl
++AC_REQUIRE([AC_PROG_LD])dnl
++AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
++AC_REQUIRE([AC_PROG_NM])dnl
++
++AC_REQUIRE([AC_PROG_LN_S])dnl
++AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
++AC_REQUIRE([AC_OBJEXT])dnl
++AC_REQUIRE([AC_EXEEXT])dnl
++dnl
++
++AC_LIBTOOL_SYS_MAX_CMD_LEN
++AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
++AC_LIBTOOL_OBJDIR
++
++AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++_LT_AC_PROG_ECHO_BACKSLASH
++
++case $host_os in
++aix3*)
++  # AIX sometimes has problems with the GCC collect2 program.  For some
++  # reason, if we set the COLLECT_NAMES environment variable, the problems
++  # vanish in a puff of smoke.
++  if test "X${COLLECT_NAMES+set}" != Xset; then
++    COLLECT_NAMES=
++    export COLLECT_NAMES
++  fi
++  ;;
++esac
++
++# Sed substitution that helps us do robust quoting.  It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
++
++# Same as above, but do not quote variable references.
++[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
++
++# Sed substitution to delay expansion of an escaped shell variable in a
++# double_quote_subst'ed string.
++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
++
++# Sed substitution to avoid accidental globbing in evaled expressions
++no_glob_subst='s/\*/\\\*/g'
++
++# Constants:
++rm="rm -f"
++
++# Global variables:
++default_ofile=libtool
++can_build_shared=yes
++
++# All known linkers require a `.a' archive for static linking (except MSVC,
++# which needs '.lib').
++libext=a
++ltmain="$ac_aux_dir/ltmain.sh"
++ofile="$default_ofile"
++with_gnu_ld="$lt_cv_prog_gnu_ld"
++
++AC_CHECK_TOOL(AR, ar, false)
++AC_CHECK_TOOL(RANLIB, ranlib, :)
++AC_CHECK_TOOL(STRIP, strip, :)
++
++old_CC="$CC"
++old_CFLAGS="$CFLAGS"
++
++# Set sane defaults for various variables
++test -z "$AR" && AR=ar
++test -z "$AR_FLAGS" && AR_FLAGS=cru
++test -z "$AS" && AS=as
++test -z "$CC" && CC=cc
++test -z "$LTCC" && LTCC=$CC
++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
++test -z "$DLLTOOL" && DLLTOOL=dlltool
++test -z "$LD" && LD=ld
++test -z "$LN_S" && LN_S="ln -s"
++test -z "$MAGIC_CMD" && MAGIC_CMD=file
++test -z "$NM" && NM=nm
++test -z "$SED" && SED=sed
++test -z "$OBJDUMP" && OBJDUMP=objdump
++test -z "$RANLIB" && RANLIB=:
++test -z "$STRIP" && STRIP=:
++test -z "$ac_objext" && ac_objext=o
++
++# Determine commands to create old-style static archives.
++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
++old_postinstall_cmds='chmod 644 $oldlib'
++old_postuninstall_cmds=
++
++if test -n "$RANLIB"; then
++  case $host_os in
++  openbsd*)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
++    ;;
++  *)
++    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
++    ;;
++  esac
++  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
++fi
++
++_LT_CC_BASENAME([$compiler])
++
++# Only perform the check for file, if the check method requires it
++case $deplibs_check_method in
++file_magic*)
++  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++    AC_PATH_MAGIC
++  fi
++  ;;
++esac
++
++AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++enable_win32_dll=yes, enable_win32_dll=no)
++
++AC_ARG_ENABLE([libtool-lock],
++    [AC_HELP_STRING([--disable-libtool-lock],
++	[avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++AC_ARG_WITH([pic],
++    [AC_HELP_STRING([--with-pic],
++	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
++    [pic_mode="$withval"],
++    [pic_mode=default])
++test -z "$pic_mode" && pic_mode=default
++
++# Use C for the default configuration in the libtool script
++tagname=
++AC_LIBTOOL_LANG_C_CONFIG
++_LT_AC_TAGCONFIG
++])# AC_LIBTOOL_SETUP
++
++
++# _LT_AC_SYS_COMPILER
++# -------------------
++AC_DEFUN([_LT_AC_SYS_COMPILER],
++[AC_REQUIRE([AC_PROG_CC])dnl
++
++# If no C compiler was specified, use CC.
++LTCC=${LTCC-"$CC"}
++
++# If no C compiler flags were specified, use CFLAGS.
++LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
++
++# Allow CC to be a program name with arguments.
++compiler=$CC
++])# _LT_AC_SYS_COMPILER
++
++
++# _LT_CC_BASENAME(CC)
++# -------------------
++# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
++AC_DEFUN([_LT_CC_BASENAME],
++[for cc_temp in $1""; do
++  case $cc_temp in
++    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
++    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
++    \-*) ;;
++    *) break;;
++  esac
++done
++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
++])
++
++
++# _LT_COMPILER_BOILERPLATE
++# ------------------------
++# Check for compiler boilerplate output or warnings with
++# the simple compiler test code.
++AC_DEFUN([_LT_COMPILER_BOILERPLATE],
++[ac_outfile=conftest.$ac_objext
++printf "$lt_simple_compile_test_code" >conftest.$ac_ext
++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_compiler_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_COMPILER_BOILERPLATE
++
++
++# _LT_LINKER_BOILERPLATE
++# ----------------------
++# Check for linker boilerplate output or warnings with
++# the simple link test code.
++AC_DEFUN([_LT_LINKER_BOILERPLATE],
++[ac_outfile=conftest.$ac_objext
++printf "$lt_simple_link_test_code" >conftest.$ac_ext
++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
++_lt_linker_boilerplate=`cat conftest.err`
++$rm conftest*
++])# _LT_LINKER_BOILERPLATE
++
++
++# _LT_AC_SYS_LIBPATH_AIX
++# ----------------------
++# Links a minimal program and checks the executable
++# for the system default hardcoded library path. In most cases,
++# this is /usr/lib:/lib, but when the MPI compilers are used
++# the location of the communication and MPI libs are included too.
++# If we don't find anything, use the default library path according
++# to the aix ld manual.
++AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
++[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`
++# Check for a 64-bit object if we didn't find anything.
++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
++}'`; fi],[])
++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
++])# _LT_AC_SYS_LIBPATH_AIX
++
++
++# _LT_AC_SHELL_INIT(ARG)
++# ----------------------
++AC_DEFUN([_LT_AC_SHELL_INIT],
++[ifdef([AC_DIVERSION_NOTICE],
++	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
++	 [AC_DIVERT_PUSH(NOTICE)])
++$1
++AC_DIVERT_POP
++])# _LT_AC_SHELL_INIT
++
++
++# _LT_AC_PROG_ECHO_BACKSLASH
++# --------------------------
++# Add some code to the start of the generated configure script which
++# will find an echo command which doesn't interpret backslashes.
++AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
++[_LT_AC_SHELL_INIT([
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$ECHO in
++X*--fallback-echo)
++  # Remove one level of quotation (which was required for Make).
++  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
++  ;;
++esac
++
++echo=${ECHO-echo}
++if test "X[$]1" = X--no-reexec; then
++  # Discard the --no-reexec flag, and continue.
++  shift
++elif test "X[$]1" = X--fallback-echo; then
++  # Avoid inline document here, it may be left over
++  :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
++  # Yippee, $echo works!
++  :
++else
++  # Restart under the correct shell.
++  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
++fi
++
++if test "X[$]1" = X--fallback-echo; then
++  # used as fallback echo
++  shift
++  cat <<EOF
++[$]*
++EOF
++  exit 0
++fi
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
++
++if test -z "$ECHO"; then
++if test "X${echo_test_string+set}" != Xset; then
++# find a string as large as possible, as long as the shell can cope with it
++  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
++    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
++       echo_test_string=`eval $cmd` &&
++       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
++    then
++      break
++    fi
++  done
++fi
++
++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++   test "X$echo_testing_string" = "X$echo_test_string"; then
++  :
++else
++  # The Solaris, AIX, and Digital Unix default echo programs unquote
++  # backslashes.  This makes it impossible to quote backslashes using
++  #   echo "$something" | sed 's/\\/\\\\/g'
++  #
++  # So, first we look for a working echo in the user's PATH.
++
++  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
++  for dir in $PATH /usr/ucb; do
++    IFS="$lt_save_ifs"
++    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++       test "X$echo_testing_string" = "X$echo_test_string"; then
++      echo="$dir/echo"
++      break
++    fi
++  done
++  IFS="$lt_save_ifs"
++
++  if test "X$echo" = Xecho; then
++    # We didn't find a better echo, so look for alternatives.
++    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
++       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
++       test "X$echo_testing_string" = "X$echo_test_string"; then
++      # This shell has a builtin print -r that does the trick.
++      echo='print -r'
++    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
++	 test "X$CONFIG_SHELL" != X/bin/ksh; then
++      # If we have ksh, try running configure again with it.
++      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++      export ORIGINAL_CONFIG_SHELL
++      CONFIG_SHELL=/bin/ksh
++      export CONFIG_SHELL
++      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
++    else
++      # Try using printf.
++      echo='printf %s\n'
++      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++	 test "X$echo_testing_string" = "X$echo_test_string"; then
++	# Cool, printf works
++	:
++      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++	   test "X$echo_testing_string" = 'X\t' &&
++	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++	   test "X$echo_testing_string" = "X$echo_test_string"; then
++	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++	export CONFIG_SHELL
++	SHELL="$CONFIG_SHELL"
++	export SHELL
++	echo="$CONFIG_SHELL [$]0 --fallback-echo"
++      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
++	   test "X$echo_testing_string" = 'X\t' &&
++	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++	   test "X$echo_testing_string" = "X$echo_test_string"; then
++	echo="$CONFIG_SHELL [$]0 --fallback-echo"
++      else
++	# maybe with a smaller string...
++	prev=:
++
++	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
++	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
++	  then
++	    break
++	  fi
++	  prev="$cmd"
++	done
++
++	if test "$prev" != 'sed 50q "[$]0"'; then
++	  echo_test_string=`eval $prev`
++	  export echo_test_string
++	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
++	else
++	  # Oops.  We lost completely, so just stick with echo.
++	  echo=echo
++	fi
++      fi
++    fi
++  fi
++fi
++fi
++
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++ECHO=$echo
++if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
++   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
++fi
++
++AC_SUBST(ECHO)
++])])# _LT_AC_PROG_ECHO_BACKSLASH
++
++
++# _LT_AC_LOCK
++# -----------
++AC_DEFUN([_LT_AC_LOCK],
++[AC_ARG_ENABLE([libtool-lock],
++    [AC_HELP_STRING([--disable-libtool-lock],
++	[avoid locking (might break parallel builds)])])
++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
++
++# Some flags need to be propagated to the compiler or linker for good
++# libtool support.
++case $host in
++ia64-*-hpux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.$ac_objext` in
++    *ELF-32*)
++      HPUX_IA64_MODE="32"
++      ;;
++    *ELF-64*)
++      HPUX_IA64_MODE="64"
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++*-*-irix6*)
++  # Find out which ABI we are using.
++  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++   if test "$lt_cv_prog_gnu_ld" = yes; then
++    case `/usr/bin/file conftest.$ac_objext` in
++    *32-bit*)
++      LD="${LD-ld} -melf32bsmip"
++      ;;
++    *N32*)
++      LD="${LD-ld} -melf32bmipn32"
++      ;;
++    *64-bit*)
++      LD="${LD-ld} -melf64bmip"
++      ;;
++    esac
++   else
++    case `/usr/bin/file conftest.$ac_objext` in
++    *32-bit*)
++      LD="${LD-ld} -32"
++      ;;
++    *N32*)
++      LD="${LD-ld} -n32"
++      ;;
++    *64-bit*)
++      LD="${LD-ld} -64"
++      ;;
++    esac
++   fi
++  fi
++  rm -rf conftest*
++  ;;
++
++x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++    *32-bit*)
++      case $host in
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_i386"
++          ;;
++        ppc64-*linux*|powerpc64-*linux*)
++          LD="${LD-ld} -m elf32ppclinux"
++          ;;
++        s390x-*linux*)
++          LD="${LD-ld} -m elf_s390"
++          ;;
++        sparc64-*linux*)
++          LD="${LD-ld} -m elf32_sparc"
++          ;;
++      esac
++      ;;
++    *64-bit*)
++      case $host in
++        x86_64-*linux*)
++          LD="${LD-ld} -m elf_x86_64"
++          ;;
++        ppc*-*linux*|powerpc*-*linux*)
++          LD="${LD-ld} -m elf64ppc"
++          ;;
++        s390*-*linux*)
++          LD="${LD-ld} -m elf64_s390"
++          ;;
++        sparc*-*linux*)
++          LD="${LD-ld} -m elf64_sparc"
++          ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++*-*-sco3.2v5*)
++  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
++  SAVE_CFLAGS="$CFLAGS"
++  CFLAGS="$CFLAGS -belf"
++  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
++    [AC_LANG_PUSH(C)
++     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
++     AC_LANG_POP])
++  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
++    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
++    CFLAGS="$SAVE_CFLAGS"
++  fi
++  ;;
++sparc*-*solaris*)
++  # Find out which ABI we are using.
++  echo 'int i;' > conftest.$ac_ext
++  if AC_TRY_EVAL(ac_compile); then
++    case `/usr/bin/file conftest.o` in
++    *64-bit*)
++      case $lt_cv_prog_gnu_ld in
++      yes*) LD="${LD-ld} -m elf64_sparc" ;;
++      *)    LD="${LD-ld} -64" ;;
++      esac
++      ;;
++    esac
++  fi
++  rm -rf conftest*
++  ;;
++
++AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
++[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
++  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
++  AC_CHECK_TOOL(AS, as, false)
++  AC_CHECK_TOOL(OBJDUMP, objdump, false)
++  ;;
++  ])
++esac
++
++need_locks="$enable_libtool_lock"
++
++])# _LT_AC_LOCK
++
++
++# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
++# ----------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
++[AC_REQUIRE([LT_AC_PROG_SED])
++AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++   lt_compiler_flag="$3"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   # The option is referenced via a variable to avoid confusing sed.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>conftest.err)
++   ac_status=$?
++   cat conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s "$ac_outfile"; then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings other than the usual output.
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
++     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
++       $2=yes
++     fi
++   fi
++   $rm conftest*
++])
++
++if test x"[$]$2" = xyes; then
++    ifelse([$5], , :, [$5])
++else
++    ifelse([$6], , :, [$6])
++fi
++])# AC_LIBTOOL_COMPILER_OPTION
++
++
++# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
++#                          [ACTION-SUCCESS], [ACTION-FAILURE])
++# ------------------------------------------------------------
++# Check whether the given compiler option works
++AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
++[AC_CACHE_CHECK([$1], [$2],
++  [$2=no
++   save_LDFLAGS="$LDFLAGS"
++   LDFLAGS="$LDFLAGS $3"
++   printf "$lt_simple_link_test_code" > conftest.$ac_ext
++   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
++     # The linker can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     if test -s conftest.err; then
++       # Append any errors to the config.log.
++       cat conftest.err 1>&AS_MESSAGE_LOG_FD
++       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
++       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
++       if diff conftest.exp conftest.er2 >/dev/null; then
++         $2=yes
++       fi
++     else
++       $2=yes
++     fi
++   fi
++   $rm conftest*
++   LDFLAGS="$save_LDFLAGS"
++])
++
++if test x"[$]$2" = xyes; then
++    ifelse([$4], , :, [$4])
++else
++    ifelse([$5], , :, [$5])
++fi
++])# AC_LIBTOOL_LINKER_OPTION
++
++
++# AC_LIBTOOL_SYS_MAX_CMD_LEN
++# --------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
++[# find the maximum length of command line arguments
++AC_MSG_CHECKING([the maximum length of command line arguments])
++AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
++  i=0
++  teststring="ABCD"
++
++  case $build_os in
++  msdosdjgpp*)
++    # On DJGPP, this test can blow up pretty badly due to problems in libc
++    # (any single argument exceeding 2000 bytes causes a buffer overrun
++    # during glob expansion).  Even if it were fixed, the result of this
++    # check would be larger than it should be.
++    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
++    ;;
++
++  gnu*)
++    # Under GNU Hurd, this test is not required because there is
++    # no limit to the length of command line arguments.
++    # Libtool will interpret -1 as no limit whatsoever
++    lt_cv_sys_max_cmd_len=-1;
++    ;;
++
++  cygwin* | mingw*)
++    # On Win9x/ME, this test blows up -- it succeeds, but takes
++    # about 5 minutes as the teststring grows exponentially.
++    # Worse, since 9x/ME are not pre-emptively multitasking,
++    # you end up with a "frozen" computer, even though with patience
++    # the test eventually succeeds (with a max line length of 256k).
++    # Instead, let's just punt: use the minimum linelength reported by
++    # all of the supported platforms: 8192 (on NT/2K/XP).
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  amigaos*)
++    # On AmigaOS with pdksh, this test takes hours, literally.
++    # So we just punt and use a minimum line length of 8192.
++    lt_cv_sys_max_cmd_len=8192;
++    ;;
++
++  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
++    # This has been around since 386BSD, at least.  Likely further.
++    if test -x /sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
++    elif test -x /usr/sbin/sysctl; then
++      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
++    else
++      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
++    fi
++    # And add a safety zone
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
++    ;;
++
++  interix*)
++    # We know the value 262144 and hardcode it with a safety zone (like BSD)
++    lt_cv_sys_max_cmd_len=196608
++    ;;
++
++  osf*)
++    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
++    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
++    # nice to cause kernel panics so lets avoid the loop below.
++    # First set a reasonable default.
++    lt_cv_sys_max_cmd_len=16384
++    #
++    if test -x /sbin/sysconfig; then
++      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
++        *1*) lt_cv_sys_max_cmd_len=-1 ;;
++      esac
++    fi
++    ;;
++  sco3.2v5*)
++    lt_cv_sys_max_cmd_len=102400
++    ;;
++  sysv5* | sco5v6* | sysv4.2uw2*)
++    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
++    if test -n "$kargmax"; then
++      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
++    else
++      lt_cv_sys_max_cmd_len=32768
++    fi
++    ;;
++  *)
++    # If test is not a shell built-in, we'll probably end up computing a
++    # maximum length that is only half of the actual maximum length, but
++    # we can't tell.
++    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
++    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
++	       = "XX$teststring") >/dev/null 2>&1 &&
++	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
++	    lt_cv_sys_max_cmd_len=$new_result &&
++	    test $i != 17 # 1/2 MB should be enough
++    do
++      i=`expr $i + 1`
++      teststring=$teststring$teststring
++    done
++    teststring=
++    # Add a significant safety factor because C++ compilers can tack on massive
++    # amounts of additional arguments before passing them to the linker.
++    # It appears as though 1/2 is a usable value.
++    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
++    ;;
++  esac
++])
++if test -n $lt_cv_sys_max_cmd_len ; then
++  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
++else
++  AC_MSG_RESULT(none)
++fi
++])# AC_LIBTOOL_SYS_MAX_CMD_LEN
++
++
++# _LT_AC_CHECK_DLFCN
++# ------------------
++AC_DEFUN([_LT_AC_CHECK_DLFCN],
++[AC_CHECK_HEADERS(dlfcn.h)dnl
++])# _LT_AC_CHECK_DLFCN
++
++
++# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
++#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
++# ---------------------------------------------------------------------
++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "$cross_compiling" = yes; then :
++  [$4]
++else
++  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
++  lt_status=$lt_dlunknown
++  cat > conftest.$ac_ext <<EOF
++[#line __oline__ "configure"
++#include "confdefs.h"
++
++#if HAVE_DLFCN_H
++#include <dlfcn.h>
++#endif
++
++#include <stdio.h>
++
++#ifdef RTLD_GLOBAL
++#  define LT_DLGLOBAL		RTLD_GLOBAL
++#else
++#  ifdef DL_GLOBAL
++#    define LT_DLGLOBAL		DL_GLOBAL
++#  else
++#    define LT_DLGLOBAL		0
++#  endif
++#endif
++
++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
++   find out it does not work in some platform. */
++#ifndef LT_DLLAZY_OR_NOW
++#  ifdef RTLD_LAZY
++#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
++#  else
++#    ifdef DL_LAZY
++#      define LT_DLLAZY_OR_NOW		DL_LAZY
++#    else
++#      ifdef RTLD_NOW
++#        define LT_DLLAZY_OR_NOW	RTLD_NOW
++#      else
++#        ifdef DL_NOW
++#          define LT_DLLAZY_OR_NOW	DL_NOW
++#        else
++#          define LT_DLLAZY_OR_NOW	0
++#        endif
++#      endif
++#    endif
++#  endif
++#endif
++
++#ifdef __cplusplus
++extern "C" void exit (int);
++#endif
++
++void fnord() { int i=42;}
++int main ()
++{
++  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
++  int status = $lt_dlunknown;
++
++  if (self)
++    {
++      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
++      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
++      /* dlclose (self); */
++    }
++  else
++    puts (dlerror ());
++
++    exit (status);
++}]
++EOF
++  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
++    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
++    lt_status=$?
++    case x$lt_status in
++      x$lt_dlno_uscore) $1 ;;
++      x$lt_dlneed_uscore) $2 ;;
++      x$lt_dlunknown|x*) $3 ;;
++    esac
++  else :
++    # compilation failed
++    $3
++  fi
++fi
++rm -fr conftest*
++])# _LT_AC_TRY_DLOPEN_SELF
++
++
++# AC_LIBTOOL_DLOPEN_SELF
++# ----------------------
++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
++[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
++if test "x$enable_dlopen" != xyes; then
++  enable_dlopen=unknown
++  enable_dlopen_self=unknown
++  enable_dlopen_self_static=unknown
++else
++  lt_cv_dlopen=no
++  lt_cv_dlopen_libs=
++
++  case $host_os in
++  beos*)
++    lt_cv_dlopen="load_add_on"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ;;
++
++  mingw* | pw32*)
++    lt_cv_dlopen="LoadLibrary"
++    lt_cv_dlopen_libs=
++   ;;
++
++  cygwin*)
++    lt_cv_dlopen="dlopen"
++    lt_cv_dlopen_libs=
++   ;;
++
++  darwin*)
++  # if libdl is installed we need to link against it
++    AC_CHECK_LIB([dl], [dlopen],
++		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
++    lt_cv_dlopen="dyld"
++    lt_cv_dlopen_libs=
++    lt_cv_dlopen_self=yes
++    ])
++   ;;
++
++  *)
++    AC_CHECK_FUNC([shl_load],
++	  [lt_cv_dlopen="shl_load"],
++      [AC_CHECK_LIB([dld], [shl_load],
++	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
++	[AC_CHECK_FUNC([dlopen],
++	      [lt_cv_dlopen="dlopen"],
++	  [AC_CHECK_LIB([dl], [dlopen],
++		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++	    [AC_CHECK_LIB([svld], [dlopen],
++		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++	      [AC_CHECK_LIB([dld], [dld_link],
++		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
++	      ])
++	    ])
++	  ])
++	])
++      ])
++    ;;
++  esac
++
++  if test "x$lt_cv_dlopen" != xno; then
++    enable_dlopen=yes
++  else
++    enable_dlopen=no
++  fi
++
++  case $lt_cv_dlopen in
++  dlopen)
++    save_CPPFLAGS="$CPPFLAGS"
++    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
++
++    save_LDFLAGS="$LDFLAGS"
++    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
++
++    save_LIBS="$LIBS"
++    LIBS="$lt_cv_dlopen_libs $LIBS"
++
++    AC_CACHE_CHECK([whether a program can dlopen itself],
++	  lt_cv_dlopen_self, [dnl
++	  _LT_AC_TRY_DLOPEN_SELF(
++	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
++	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
++    ])
++
++    if test "x$lt_cv_dlopen_self" = xyes; then
++      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
++      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
++    	  lt_cv_dlopen_self_static, [dnl
++	  _LT_AC_TRY_DLOPEN_SELF(
++	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
++	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
++      ])
++    fi
++
++    CPPFLAGS="$save_CPPFLAGS"
++    LDFLAGS="$save_LDFLAGS"
++    LIBS="$save_LIBS"
++    ;;
++  esac
++
++  case $lt_cv_dlopen_self in
++  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
++  *) enable_dlopen_self=unknown ;;
++  esac
++
++  case $lt_cv_dlopen_self_static in
++  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
++  *) enable_dlopen_self_static=unknown ;;
++  esac
++fi
++])# AC_LIBTOOL_DLOPEN_SELF
++
++
++# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
++# ---------------------------------
++# Check to see if options -c and -o are simultaneously supported by compiler
++AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
++[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
++AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
++  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
++  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
++   $rm -r conftest 2>/dev/null
++   mkdir conftest
++   cd conftest
++   mkdir out
++   printf "$lt_simple_compile_test_code" > conftest.$ac_ext
++
++   lt_compiler_flag="-o out/conftest2.$ac_objext"
++   # Insert the option either (1) after the last *FLAGS variable, or
++   # (2) before a word containing "conftest.", or (3) at the end.
++   # Note that $ac_compile itself does not contain backslashes and begins
++   # with a dollar sign (not a hyphen), so the echo should work correctly.
++   lt_compile=`echo "$ac_compile" | $SED \
++   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
++   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
++   -e 's:$: $lt_compiler_flag:'`
++   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
++   (eval "$lt_compile" 2>out/conftest.err)
++   ac_status=$?
++   cat out/conftest.err >&AS_MESSAGE_LOG_FD
++   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
++   if (exit $ac_status) && test -s out/conftest2.$ac_objext
++   then
++     # The compiler can only warn and ignore the option if not recognized
++     # So say no if there are warnings
++     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
++     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
++     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
++       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
++     fi
++   fi
++   chmod u+w . 2>&AS_MESSAGE_LOG_FD
++   $rm conftest*
++   # SGI C++ compiler will create directory out/ii_files/ for
++   # template instantiation
++   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
++   $rm out/* && rmdir out
++   cd ..
++   rmdir conftest
++   $rm conftest*
++])
++])# AC_LIBTOOL_PROG_CC_C_O
++
++
++# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
++# -----------------------------------------
++# Check to see if we can do hard links to lock some files if needed
++AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
++[AC_REQUIRE([_LT_AC_LOCK])dnl
++
++hard_links="nottested"
++if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
++  # do not overwrite the value of need_locks provided by the user
++  AC_MSG_CHECKING([if we can lock with hard links])
++  hard_links=yes
++  $rm conftest*
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  touch conftest.a
++  ln conftest.a conftest.b 2>&5 || hard_links=no
++  ln conftest.a conftest.b 2>/dev/null && hard_links=no
++  AC_MSG_RESULT([$hard_links])
++  if test "$hard_links" = no; then
++    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
++    need_locks=warn
++  fi
++else
++  need_locks=no
++fi
++])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
++
++
++# AC_LIBTOOL_OBJDIR
++# -----------------
++AC_DEFUN([AC_LIBTOOL_OBJDIR],
++[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
++[rm -f .libs 2>/dev/null
++mkdir .libs 2>/dev/null
++if test -d .libs; then
++  lt_cv_objdir=.libs
++else
++  # MS-DOS does not allow filenames that begin with a dot.
++  lt_cv_objdir=_libs
++fi
++rmdir .libs 2>/dev/null])
++objdir=$lt_cv_objdir
++])# AC_LIBTOOL_OBJDIR
++
++
++# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
++# ----------------------------------------------
++# Check hardcoding attributes.
++AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
++[AC_MSG_CHECKING([how to hardcode library paths into programs])
++_LT_AC_TAGVAR(hardcode_action, $1)=
++if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
++   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
++   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
++
++  # We can hardcode non-existant directories.
++  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
++     # If the only mechanism to avoid hardcoding is shlibpath_var, we
++     # have to relink, otherwise we might link with an installed library
++     # when we should be linking with a yet-to-be-installed one
++     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
++     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
++    # Linking always hardcodes the temporary library directory.
++    _LT_AC_TAGVAR(hardcode_action, $1)=relink
++  else
++    # We can link without hardcoding, and we can hardcode nonexisting dirs.
++    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
++  fi
++else
++  # We cannot hardcode anything, or else we can only hardcode existing
++  # directories.
++  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
++fi
++AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
++
++if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
++  # Fast installation is not supported
++  enable_fast_install=no
++elif test "$shlibpath_overrides_runpath" = yes ||
++     test "$enable_shared" = no; then
++  # Fast installation is not necessary
++  enable_fast_install=needless
++fi
++])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
++
++
++# AC_LIBTOOL_SYS_LIB_STRIP
++# ------------------------
++AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
++[striplib=
++old_striplib=
++AC_MSG_CHECKING([whether stripping libraries is possible])
++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
++  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
++  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
++  AC_MSG_RESULT([yes])
++else
++# FIXME - insert some real tests, host_os isn't really good enough
++  case $host_os in
++   darwin*)
++       if test -n "$STRIP" ; then
++         striplib="$STRIP -x"
++         AC_MSG_RESULT([yes])
++       else
++  AC_MSG_RESULT([no])
++fi
++       ;;
++   *)
++  AC_MSG_RESULT([no])
++    ;;
++  esac
++fi
++])# AC_LIBTOOL_SYS_LIB_STRIP
++
++
++# AC_LIBTOOL_SYS_DYNAMIC_LINKER
++# -----------------------------
++# PORTME Fill in your ld.so characteristics
++AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
++[AC_MSG_CHECKING([dynamic linker characteristics])
++library_names_spec=
++libname_spec='lib$name'
++soname_spec=
++shrext_cmds=".so"
++postinstall_cmds=
++postuninstall_cmds=
++finish_cmds=
++finish_eval=
++shlibpath_var=
++shlibpath_overrides_runpath=unknown
++version_type=none
++dynamic_linker="$host_os ld.so"
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++if test "$GCC" = yes; then
++  sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
++  if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
++    # if the path contains ";" then we assume it to be the separator
++    # otherwise default to the standard path separator (i.e. ":") - it is
++    # assumed that no part of a normal pathname contains ";" but that should
++    # okay in the real world where ";" in dirpaths is itself problematic.
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
++  else
++    sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
++  fi
++else
++  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++fi
++need_lib_prefix=unknown
++hardcode_into_libs=no
++
++# when you set need_version to no, make sure it does not cause -set_version
++# flags to be left without arguments
++need_version=unknown
++
++case $host_os in
++aix3*)
++  version_type=linux
++  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
++  shlibpath_var=LIBPATH
++
++  # AIX 3 has no versioning support, so we append a major version to the name.
++  soname_spec='${libname}${release}${shared_ext}$major'
++  ;;
++
++aix4* | aix5*)
++  version_type=linux
++  need_lib_prefix=no
++  need_version=no
++  hardcode_into_libs=yes
++  if test "$host_cpu" = ia64; then
++    # AIX 5 supports IA64
++    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
++    shlibpath_var=LD_LIBRARY_PATH
++  else
++    # With GCC up to 2.95.x, collect2 would create an import file
++    # for dependence libraries.  The import file would start with
++