zypper(8)

NAME

zypper - Command-line interface to ZYpp system management library (libzypp)

SYNTAX

zypper [--global-opts] <command> [--command-opts] [command-arguments] zypper help [command]

DESCRIPTION

zypper is a command-line interface to ZYpp system management library. It can be used to install, update, remove software, manage repositories, perform various queries, and more.

CONCEPTS
Most of the following concepts are common for all applications based on the libzypp package management library, but there are some zypper specifics.

  Repositories

Libzypp works with package metadata, that is information about packages and their relations extracted from RPM packages and other data like patch information, pattern definitions, etc. These data are stored together with the RPM files in folders called repositories. Repositories can be placed on various media like an HTTP or FTP server, DVD, or a folder on a local disc. There is a special set of commands in zypper intented to manipulate repositories. Also many commands and options take a repository as an argument. See section COMMANDS, subsection Repository Management for more details.

  Resource Identfiers (URI)
To specify locations of repositories or other resources (RPM files, .repo files) you can use any type of URIs supported by libzypp. See http://en.opensuse.org/openSUSE:Libzypp_URIs for a complete list and usage examples. Zypper also accepts special URIs identifying openSUSE Build Service (OBS) repositories in the addrepo command. These URIs have the form of obs://<project>/[platform], where project is the name of the OBS project and platform is the target platform (OS) for which the repository is intended. For example: obs://server:http/openSUSE_11.3. If platform is omitted, zypper.conf's obs.platform value is used. See also other options in the [obs] section of zypper.conf. In addition to these URIs you can use plain directory and file paths in which case zypper automatically treats them as dir:/path URIs.

  Refresh

Refreshing a repository means downloading metadata of packages from the medium (if needed), storing it in local cache (typically under /var/cache/zypp/raw/<alias> directory) and preparsing the metadata into .solv files (building the solv cache), typically under /var/cache/zypp/solv/<alias>.

The metadata get refreshed either automatically or on user request. An automatic refresh takes place right before reading metadata from the database if the auto-refresh is enabled for the repository and the metada is reported to be out of date. If the auto-refresh is disabled, the repository will only be refreshed on user request. You can request a refresh by calling zypper refresh (see the documentation of the refresh command for details).

The repository metadata are checked for changes before actually doing the refresh. A change is detected by downloading one or two metadata index files (small files) and comparing the checksums of the cached ones and the remote ones. If the files differ, the repository is out of date and will be refreshed.

To delay the up-to-date check (and thus the automatic refresh) for a certain number of minutes, edit the value of the repo.refresh.delay attribute of ZYpp config file (/etc/zypp/zypp.conf). This means, zypper will not even try to download and check the index files, and you will be able to use zypper for operations like search or info without internet access or root privileges.

  Services

Services are one level above repositories and serve to manage repositories or to do some special tasks. Libzypp currently supports only one type of services, the Repository Index Service (RIS).

Repository Index Service (RIS) is a special type of repository which contains a list of other repositories. This list can be generated dynamically by the server according to some URI parameters or user name, or can be static. Once such service is added to your system, zypper takes care of adding, modifying, or removing these repositories on your system to reflect the current list. See section Service Management and http://old-en.opensuse.org/Standards/Repository_Index_Service for more details.

  Package Types

zypper works with several types of resource objects, called resolvables. A resolvable is a package, patch, pattern, or a product.

package - an ordinary RPM package.
patch - update of one or more packages. A patch can include special scripts and messages to be run or shown during installation of the update.
pattern - group of packages required or recommended to install some functionality.
product - group of packages which are necessary to install a product.
srcpackage - source code package (.src.rpm). This type works in search and install commands.

Throughout this manual we will refer to resolvables simply as packages and to resolvable types as package types. These type names can be used as arguments of --type option in several commands like install, info, or search.

  Package Dependencies

Software packages depend on each other in various ways. Packages usually require or recommend other packages, they can declare that they conflict with other packages, etc. Packages can also depend on specific hardware. See http://old-en.opensuse.org/Software_Management/Dependencies for more information. Zypper uses a dependency solver to find out what packages need to be installed to satisfy the user's request.

  Package File Conflicts

File conflicts happen when two packages attempt to install files with the same name but different contents. This may happen if you are installing a newer version of a package without erasing the older version, of if two unrelated packages each install a file with the same name.

As checking for file conflicts requires access to the full filelist of each package being installed, zypper will check for file conflict only if all packages are downloaded in advance (see --download-in-advance).

As the reason for file conlicts usually is a poor package design or lack of coordination between the the people building the packages, they are not easy to resolve. By using the --replacefiles option you can force zypper to replace the conflicting files. Nevertheless this may damage the package whose file gets replaced.

COMMANDS

zypper provides a number of commands. Each command accepts the options listed in the GLOBAL OPTIONS section. These options must be specified before the command name. In addition, many commands have specific options, which are listed in this section. These command-specific options must be specified after the name of the command and before any of the command arguments.

  General Commands

help [command]
    Shows help texts. If invoked without any argument (just 'zypper' or 'zypper help'), zypper displays global help text which lists all available global options and commands. If invoked with a command name argument, zypper displays help for the specified command, if such command exists. Long as well as short variants of the command names can be used. For your convenience, zypper help can be invoked in any of the following ways: $ zypper help [command]
    $ zypper -h|--help [command]
    $ zypper [command] -h|--help

shell (sh)
    Starts a shell for entering multiple commands in one session. Exit the shell using "exit", "quit", or Ctrl-D. The shell support is not complete so expect bugs there. However, there's no urgent need to use the shell since libzypp became so fast thanks to the SAT solver and its tools (openSUSE 11.0), but still, you're welcome to experiment with it.

  Package Management Commands

info (if) [options] <name> ...
    Displays detailed information about the specified packages. For each specified package, zypper finds the best available version in defined repositories and shows information for this package.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number or URI. This option can be used multiple times.

-t, --type <type>
    Type of package (default: package). See section Package Types for list of available package types.

--provides
    Show symbols the package provides.

--requires
    Show symbols the package requires.

--conflicts
    Show symbols the package conflits with.

--obsoletes
    Show symbols the package obsoletes.

--recommends
    Show symbols the package recommends.

--suggests
    Show symbols the package suggests.

Examples:
    Show information about package 'workrave':
    $ zypper info workrave Show information about patch 'libzypp':
    $ zypper info -t patch libzypp Show information about pattern 'lamp_server':
    $ zypper info -t pattern lamp_server

install (in) [options] <name|capability|rpm_file_uri> ...
    Install or update packages. The packages can be selected by their name or by a capability they provide. Capability is: NAME, or "NAME[.ARCH][OP<EDITION>]", where ARCH is architecture code, OP is <, <=, =, >=, or > and EDITION is VERSION[-RELEASE]. For example: zypper=0.8.8-2. The NAME component of a capability is not only a package name but any symbol provided by packages: /bin/vi, libcurl.so.3, perl(Time::ParseDate). Just remember to quote to protect the special characters from the shell, for example: zypper\>0.8.10 or 'zypper>0.8.10' If EDITION is not specified, the newest installable version will be installed. This also means that if the package is already installed and newer versions are available, it will get upgraded to the newest installable version. If ARCH is not specified, or the last dot of the capability name string is not followed by known architecture, the solver will treat the whole string as a capability name. If the ARCH is known, the solver will select a package matching that architecture and complain if such package cannot be found. Zypper will report packages that it cannot find. Further, in interactive mode, zypper proceeds with installation of the rest of requested packages, and it will abort immediately in non-interactive mode. In both cases zypper returns ZYPPER_EXIT_INF_CAP_NOT_FOUND after finishing the operation. Zypper is also able to install plain RPM files while trying to satisfy their dependencies using packages from defined repositories. You can install a plain RPM file by specifying its location in the install command arguments either as a local path or an URI. E.g.: $ zypper install ~/rpms/foo.rpm http://some.site/bar.rpm Zypper will download the files into its cache directory (/var/cache/zypper/RPMS), add this directory as a temporary plaindir repository and mark the respective packages for installation. In the install command, you can specify also packages you wish to remove in addition to the packages you wish to install, by prepending their names by a '-' or '~' character. For example: $ zypper install vim -emacs
    $ zypper remove emacs +vim will both install vim and remove emacs. Note that if you choose to use '-' with the first package you specify, you need to write '--' before it to prevent its interpretation as a command option. $ zypper install -- -boring-game great-game great-game-manual

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number or URI. This option can be used multiple times.

-t, --type <type>
    Type of package to install (default: package). See section Package Types for list of available package types. If pattern is specified, and the pattern is not yet installed, all packages required and recommended by the pattern will be installed. A pattern is considered installed if all the packages and patterns it requires are installed. Thus a pattern can be evalueated as installed even if you do not install the pattern itself, but rather the packages it requries. Use zypper search -t pattern [name] to look for available patterns and zypper info -t pattern <name> to list its contents. If patch is specified, zypper will install and/or remove packages to satisfy specified patch. This is a way to ensure that specific bug fix is installed. Like patterns, patches can also be evaluated as installed by installing the packages needed to satisfy the patch. Use zypper list-patches to look for available needed patches and zypper info -t patch <name> to display detailed information about a patch. If product is specified, zypper ensures all packages required by the product are installed. Use zypper se -t product [name] to look for available products and zypper info -t product <name> to display detailed information about a product.

-n, --name
    Select packages by their name, don't try to select by capabilities.

-f, --force
    Install even if the item is already installed (reinstall), downgraded or changes vendor or architecture.

--oldpackage
    Allow to replace a newer item with an older one. Handy if you are doing a rollback. Unlike --force it will not enforce a reinstall, if the item is already installed with the requested version.

--from <alias|name|#|URI>
    Select packages from specified repository. If strings specified as arguments to the install command match packages in repositories specified in this option, they will be marked for installation. This option currently implies --name, but allows using wildcards for specifying packages.

-C, --capability
    Select packages by capabilities.

-l, --auto-agree-with-licenses
    Automatically say 'yes' to third party license confirmation prompt. By using this option, you choose to agree with licenses of all third-party software this command will install. This option is particularly useful for administators installing the same set of packages on multiple machines (by an automated process) and have the licenses confirmed before.

--debug-solver
    Create solver test case for debugging. Use this option, if you think the dependencies were not solved all right and attach the resulting /var/log/zypper.solverTestCase directory to your bug report. To use this option, simply add it to the problematic install or remove command.

--no-recommends
    By default, zypper installs also packages recommended by the requested ones. This option causes the recomended packages to be ignored and only the required ones to be installed.

--replacefiles
    Install the packages even if they replace files from other, already installed, packages. Default is to treat file conflicts as an error. --download-as-needed disables the fileconflict check because access to all packages filelists is needed in advance in order to perform the check.

-R, --no-force-resolution
    Do not force the solver to find a solution. Instead, report dependency problem and prompt the user to resolve it manually.

--force-resolution
    Force the solver to find a solution, even if it would mean removing all packages with unfulfilled requirements. The default behavior is 'force' in the interactive mode and 'no-force' in the non-interactive mode. If this option is specified, it takes the preference.

-D, --dry-run
    Test the installation, do not actually install any package. This option will add the --test option to the rpm commands run by the install command.

--details
    Show the detailed installation summary.

Download-and-install mode options:

-d, --download-only
    Only download the packages for later installation.

--download-in-advance
    First download all packages, then start installing.

--download-in-heaps
    (Not yet implemented, currently the same as --download-in-advance). Download a minimal set of packages that can be installed without leaving the system in broken state, and install them. Then download and install another heap until all are installed. This helps to keep the system in consistent state without the need to download all package in advance, which combines the advantages of --download-in-advance and --download-as-needed. This is the default mode.

--download-as-needed
    Download one package, install it immediately, and continue with the rest until all are installed.

--download <mode>
    Use the specified download-and-install mode. Available modes are: only, in-advance, in-heaps, as-needed. See corresponding --download-<mode> options for their description.

More examples:
    Install lamp_server pattern:
    $ zypper install -t pattern lamp_server Install GhostScript viewer, but ignore recommended packages:
    $ zypper install --no-recommends gv Install version 2.0.6 of virtualbox-ose package (any of the following):
    $ zypper install virtualbox-ose-2.0.6
    $ zypper install virtualbox-ose=2.0.6
    $ zypper install virtualbox-ose = 2.0.6

source-install (si) <name> ...
    Install specified source packages and their build dependencies. If the name of a binary package is given, the coresponding source package is looked up and installed instead. This command will try to find the newest available versions of the source packages and use rpm -i to install them and the packages that are required to build the source package. Note that the source packages must be available in repositories you are using. You can check whether a repository contains any source packages using the following command: $ zypper search -t srcpackage -r <alias|name|#|URI>

-d, --build-deps-only
    Install only build dependencies of specified packages.

-D, --no-build-deps
    Don't install build dependencies.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

--download-only
    Only download the packages, do not install.

Examples:
    Install build dependencies of dbus-1 source package:
    $ zypper si -d dbus-1

verify (ve) [options]
    Check whether dependencies of installed packages are satisfied. In case that any dependency problems are found, zypper suggests packages to install or remove to fix them.

--no-recommends
    By default, zypper installs also packages recommended by the requested ones (the ones needed to fix broken dependencies in this case). This option causes the recomended packages to be ignored and only the required ones to be installed.

-D, --dry-run
    Test the repair, do not actually do anything to the system.

--details
    Show the detailed installation summary.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

--debug-solver
    Create solver test case for debugging. See the install command for details.

install-new-recommends (inr) [options]
    Install newly added packages recommended by already installed ones. This can typically be used to install language packages recently added to repositories or drivers for newly added hardware.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

-D, --dry-run
    Test the installation, do not actually install anything.

--details
    Show the detailed installation summary.

--debug-solver
    Create solver test case for debugging. See the install command for details.

This command also accepts the download-and-install mode options described
    in the install command description.

remove (rm) [options] <name> ...

remove (rm) [options] --capability <capability> ...
    Remove (uninstall) packages. The packages can be selected by their name or by a capability they provide. For details on package selection see the install command description.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

-t, --type <type>
    Type of package (default: package). See section Package Types for list of available package types. Since patches are not installed in sense of copying files or recording a database entry, they cannot be uninstalled, even though zypper shows them as installed. The installed status is determined solely based on the installed status of its required dependencies. If these dependencies are satisified, the patch is rendered installed. Uninstallation of patterns is currently not implemented.

-n, --name
    Select packages by their name (default).

-C, --capability
    Select packages by capabilities.

--debug-solver
    Create solver test case for debugging. See the install command for details.

-R, --no-force-resolution
    Do not force the solver to find a solution. Instead, report dependency problem and prompt the user to resolve it manually.

--force-resolution
    Force the solver to find a solution, even if it would mean removing all packages with unfulfilled requirements. The default behavior is 'force' in the interactive mode and 'no-force' in the non-interactive mode. If this option is specified, it takes the preference.

-u, --clean-deps
    Automatically remove dependencies which become unneeded after removal of requested packages.

-U, --no-clean-deps
    No automatic removal of unneeded dependencies.

-D, --dry-run
    Test the removal of packages, do not actually remove anything. This option will add the --test option to the rpm commands run by the remove command.

--details
    Show the detailed installation summary.

  Update Management Commands

list-updates (lu) [options]
    List available updates. This command will list only installable updates, i.e. updates which have no dependency problems, or which do not change package vendor. This list is what the update command will propose to install. To list all packages for which newer version are available, use --all option.

-t, --type <type>
    Type of package (default: package). See section Package Types for list of available package types. If patch is specified, zypper acts as if the list-patches command was executed.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

-a, --all
    List all packages for which newer versions are available, regardles whether they are installable or not.

--best-effort
    See the update command for description.

update (up) [options] [packagename] ...
    Update installed packages with newer versions, where possible. This command will not update packages which would require change of package vendor unless the vendor is specified in /etc/zypp/vendors.d, or which would require manual resolution of problems with dependencies. Such non-installable updates will then be listed in separate section of the summary as "The following package updates will NOT be installed:". To update individual packages, specify one or more package names. You can use the '*' and '?' wildcard characters in the package names to specify multiple packages matching the pattern.

-t, --type <type>
    Type of package (default: package). See section Package Types for list of available package types. If patch is specified, zypper acts as if the patche command was executed.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

--skip-interactive
    This will skip interactive patches, that is, those that need reboot, contain a message, or update a package whose license needs to be confirmed.

--with-interactive
    Avoid skipping of interactive patches when in non-interactive mode.

-l, --auto-agree-with-licenses
    Automatically say 'yes' to third party license confirmation prompt. By using this option, you choose to agree with licenses of all third-party software this command will install. This option is particularly useful for administators installing the same set of packages on multiple machines (by an automated process) and have the licenses confirmed before.

--debug-solver
    Create solver test case for debugging. See the install command for details.

--no-recommends
    By default, zypper installs also packages recommended by the requested ones. This option causes the recomended packages to be ignored and only the required ones to be installed.

--replacefiles
    Install the packages even if they replace files from other, already installed, packages. Default is to treat file conflicts as an error. --download-as-needed disables the fileconflict check because access to all packages filelists is needed in advance in order to perform the check.

-R, --no-force-resolution
    Do not force the solver to find a solution. Instead, report dependency problem and prompt the user to resolve it manually.

--force-resolution
    Force the solver to find a solution, even if it would mean removing all packages with unfulfilled requirements. The default behavior is 'no-force'. If this option is specified, it takes the preference.

-D, --dry-run
    Test the update, do not actually install or update any package. This option will add the --test option to the rpm commands run by the update command.

--details
    Show the detailed installation summary.

--best-effort
    Do a 'best effort' approach to update. This method does not explicitly select packages with best version and architecture, but instead requests installation of a package with higher version than the installed one and leaves the rest on the dependency solver. This method is always used for packages, and is optional for products and patterns. It is not applicable to patches.

This command also accepts the download-and-install mode options described
    in the install command description.

list-patches (lp) [options]
    List all available needed patches. This command is similar to 'zypper list-updates -t patch'. Note that since the arguments of some of the following options are not required, they must be specified using '=' instead of a space.

-b, --bugzilla[=#]
    List available needed patches for all Bugzilla issues, or issues whose number matches the given string.

--cve[=#]
    List available needed patches for all CVE issues, or issues whose number matches the given string.

-g, --category <category>
    List available patches in the specified category.

--issues[=string]
    Look for issues whose number, summary, or description matches the specified string. Issues found by number are displayed separately from those found by descriptions. In the latter case, use zypper patch-info <patchname> to get information about issues the patch fixes.

-a, --all
    By default, only patches that are relevant and needed on your system are listed. This option causes all available released patches to be listed. This option can be combined with all the rest of the list-updates command options.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

patch-check (pchk)
    Check for patches. Displays a count of applicable patches and how many of them have the security category.

See also the EXIT CODES section for details on exit status of 0, 100, and 101 returned by this command.

-r, --repo <alias|name|#|URI>
    Check for patches only in the repository specified by the alias, name, number, or URI. This option can be used multiple times.

patch [options]
    Install all available needed patches. If there are patches that affect the package management itself, those will be installed first and you will be asked to run the patch command again. This command is similar to 'zypper update -t patch'.

-b, --bugzilla <#>
    Install patch fixing a Bugzilla issue specified by number. Use list-patches --bugzilla command to get a list of available needed patches for specific issues.

--cve <#>
    Install patch fixing a MITRE's CVE issue specified by number. Use list-patches --cve command to get a list of available needed patches for specific issues.

-g, --category <category>
    Install all patches in the specified category. Use list-patches --category command to get a list of available patches for a specific category.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

--skip-interactive
    Skip interactive patches.

--with-interactive
    Avoid skipping of interactive patches when in non-interactive mode.

-l, --auto-agree-with-licenses
    See the update command for description of this option.

--no-recommends
    By default, zypper installs also packages recommended by the requested ones. This option causes the recomended packages to be ignored and only the required ones to be installed.

--replacefiles
    Install the packages even if they replace files from other, already installed, packages. Default is to treat file conflicts as an error. --download-as-needed disables the fileconflict check because access to all packages filelists is needed in advance in order to perform the check.

--debug-solver
    Create test case for debugging of dependency resolver.

-D, --dry-run
    Test the update, do not actually update.

This command also accepts the download-and-install mode options described
    in the install command description.

--details
    Show the detailed installation summary.

dist-upgrade (dup) [options]
    Perform a distribution upgrade. This command applies the state of (specified) repositories onto the system; upgrades (or even downgrades) installed packages to versions found in repositories, removes packages that are no longer in the repositories and pose a dependency problem for the upgrade, handles package splits and renames, etc. If no repositories are specified via --from or --repo options, zypper will do the upgrade with all defined repositories. This can be a problem if the system contains conflicting repositories, like repositories for two different distribution releases. This often happens if one forgets to remove an older release repository after adding a new one, say openSUSE 11.1 and openSUSE 11.2. To avoid the above trouble, you can specify the repositories from which to do the upgrade using the --from or --repo options. The difference between these two is that when --repo is used, zypper uses only the specified repositories, while with --from zypper can also use the rest of the enabled repositories to satisfy package dependencies. Note: distribution upgrades in openSUSE are currently only supported between consecutive releases. To upgrade multiple releases, upgrade each consecutive release one at a time. For more details see http://en.opensuse.org/SDB:System_upgrade and the openSUSE release notes at http://doc.opensuse.org/release-notes/.

--from <alias|name|#|URI>
    Restricts the upgrade to the specified repositories (the option can be used multiple times) only, but can satisfy dependencies also from the rest of enabled repositories.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

-l, --auto-agree-with-licenses
    Automatically say 'yes' to third party license confirmation prompt. By using this option, you choose to agree with licenses of all third-party software this command will install. This option is particularly useful for administators installing the same set of packages on multiple machines (by an automated process) and have the licenses confirmed before.

--no-recommends
    By default, zypper installs also packages recommended by the requested ones. This option causes the recomended packages to be ignored and only the required ones to be installed.

--replacefiles
    Install the packages even if they replace files from other, already installed, packages. Default is to treat file conflicts as an error. --download-as-needed disables the fileconflict check because access to all packages filelists is needed in advance in order to perform the check.

--debug-solver
    Create solver test case for debugging. See the install command for details.

-D, --dry-run
    Test the upgrade, do not actually install or update any package. This option will add the --test option to the rpm commands run by the dist-upgrade command.

This command also accepts the download-and-install mode options described
    in the install command description.

--details
    Show the detailed installation summary.

Examples:
    Upgrade the system using 'factory' and 'packman' repository:
    $ zypper install zypper libzypp
    $ zypper dup --from factory --from packman

  Query Commands

search (se) [options] [querystring|capability] ...
    Search for packages matching any of the given strings. * (any substring) and ? (any character) wildcards can also be used within search strings. If the search string is enclosed in '/', for example $ zypper se '/^k.*e$/', it's interpreted as a regular expression. It's also possible to specify a capability like "NAME[.ARCH][OP<EDITION>]", where ARCH is an architecture code, OP is <, <=, =, >=, or > and EDITION is VERSION[-RELEASE]. Also quote here to protect the special characters from the shell, for example: $ zypper se 'libgcc>4.6'. Results of search are printed in a table with following columns: S (status), Catalog, Type (type of package), Name, Version, Arch (architecture). The status column can contain the following values: i - installed, v - another version installed, or an empty space for neither of the former cases. The 'v' status is only shown if the version or the repository matters (--details or --repo is used), and the installed version differs from the one listed or is from a repository other than specified.

    This command accepts the following options:

--match-substrings
    Matches for search strings may be partial words (default).

--match-words
    Matches for search strings may only be whole words.

--match-exact
    Searches for an exact name of the package.

--provides
    Search for packages which provide the search strings. A search string here might be also any symbol provided by a package like /bin/vi, libcurl.so.3, perl(Time::ParseDate), web_browser, e.g. search for the package which provides the shell: zypper se --provides /bin/sh

--requires
    Search for packages which require the search strings. A search string here might be also any symbol required by a package, e.g. all packages which require the snapper library: zypper se --requires libsnapper.so

--recommends
    Search for packages which recommend the search strings, e.g. zypper se --recommends usb_modeswitch

--suggests
    Search for packages which suggest the search strings, e.g. zypper se --suggests acroread

--conflicts
    Search for packages conflicting with the search strings, e.g. zypper se --conflicts aspell-hi

--obsoletes
    Search for packages wich obsolete the search strings, e.g. zypper se --obsoletes efence

-n, --name
    Useful together with dependency options, otherwise searching in package name is default.

-f, --file-list
    Search in file list of packages.

-d, --search-descriptions
    Search also in summaries and descriptions.

-C, --case-sensitive
    Perform case-sensitive search.

-i, --installed-only
    Show only packages that are already installed.

-u, --uninstalled-only
    Show only packages that are not currently installed.

-t, --type <type>
    Search only for packages of specified type. See section Package Types for list of available package types. Multiple -t option are allowed. See also the type-specific query commands like packages, patterns, etc.

-r, --repo <alias|name|#|URI>
    Work only with the repository specified by the alias, name, number, or URI. This option can be used multiple times.

--sort-by-name
    Sort packages by name (default).

--sort-by-repo
    Sort packages by catalog, not by name.

-s, --details
    Show all available versions of found packages, each version in each repository on a separate line.

-v, --verbose
    Like --details with additional information where the search has matched (useful when searching for dependencies, e.g. --provides).

Examples:
    Search for YaST packages (quote the string to prevent the shell from expanding the wildcard):
    $ zypper se 'yast*' Show all available versions of package 'kernel-default':
    $ zypper se -s --match-exact kernel-default Look for RSI acronym (case-sensitively), also in summaries and descriptions:
    $ zypper se -dC --match-words RSI

packages (pa) [options] [repository] ...
    List all available packages or all packages from specified repositories (similar to zypper search -s -t package). Also allows the options --orphaned, --suggested, --recommended and --unneeded to get corresponding lists of packages.

-r, --repo <alias|name|#|URI>
    Just another means to specify repositories.

-i, --installed-only
    Show only installed packages.

-u, --uninstalled-only
    Show only packages which are not installed.

--orphaned
    Show packages which are orphaned (without repository).

--suggested
    Show packages which are suggested.

--recommended
    Show packages which are recommeded.

--unneeded
    Show packages which are unneeded.

patches (pch) [options] [repository] ...
    List all available patches from specified repositories, including those not needed. Similar to zypper search -s -t patch.

-r, --repo <alias|name|#|URI>
    Just another means to specify repositories.

patterns (pt) [options] [repository] ...
    List all available patterns or all patterns from specified repositories. Similar to zypper search -s -t pattern.

-r, --repo <alias|name|#|URI>
    Just another means to specify repositories.

-i, --installed-only
    Show only installed patterns.

-u, --uninstalled-only
    Show only patterns which are not installed.

products (pd) [options] [repository] ...
    List all available products or all products from specified repositories. Similar to zypper search -s -t product, but shows also the type of the product (base, add-on).

-r, --repo <alias|name|#|URI>
    Just another means to specify repositories.

-i, --installed-only
    Show only installed products.

-u, --uninstalled-only
    Show only products which are not installed.

what-provides (wp) <capability>
    List all packages providing the specified capability. See also the install command for hint about capabilities.
    what-provides is replaced by the search command, which now has the functionality to search for dependencies (and allows various options).
    The command line is automatically transformed to the appropriate search, e.g.:
    $ zypper what-provides 'zypper>1.6' to $ zypper se --provides --match-exact 'zypper>1.6'

  Repository Management

Zypper is able to work with YaST, RPM-MD (yum) software repositories, and plain directories containing .rpm files. Repositories are primarily identified using their URI or alias. Alias serves as a shorthand for the long URI or name of the repository. The name of the repository should briefly describe the repository and is shown to the user in tables and messages. The name is not required, and if not known, the alias is shown instead. The alias is required and uniquely identifies the repository on the system. The alias, name, URI, or the number from zypper repos list can be used to specify a repository as an argument of various zypper commands and options like refresh, --repo, or --from.

Supported URI formats:
    scheme: [//[user[:password]@]host[:port]] /path [?query][#fragment]
    Special characters occuring in URI components (like a '@' in a password) must be %-encoded ('%40').

CD or DVD drive
    Optionally with devices list for probing. cd:///
    dvd:/subdir?devices=/dev/sr0,/dev/sr1

FTP/HTTP/HTTPS directory tree
    The ftp URL scheme supports absolute and relative paths to the default ftp server directory (RFC1738, Section 3.2.2). To use an absolute path, you have to prepend the path with an additional slash, what results in a "/%2f" combination (second "/" encoded to "%2f") at the begin of the URL path. This is important, especially in user authenticated ftp, where the users home is usually the default directory of the server (except when the server chroots into the users home directory). Explicit proxy settings may be passed via optional parameters proxy, proxyport, proxyuser and proxypass. HTTP authentication methods to use can be defined as comma separated list via optional parameter auth. Valid methods are e.g. 'basic', 'digest', 'ntlm', 'negotiate'. Note, that this list depends on the list of methods supported by the curl library.
    ftp://user:pass@server/path/to/media/dir
    ftp://user:pass@server/%2fhome/user/path/to/media/dir
    http://user:pass@server/path
    https://user:pass@server/path?proxy=foo&proxyuser=me&proxypass=pw

Disk volume (partition)
    Mandatory device parameter specifying the name of the block device to mount. The name of the optional filesystem defaults to "auto". hd:/subdir?device=/dev/sda1&filesystem=reiserfs

Local directory tree
    dir:/directory/name

Media in an ISO image (loopback mounted)
    Mandatory iso parameter specifying the name of the iso file. Optional url parameter specifying the URL to the directory containing the iso file. Optional mnt parameter specifying the preferred attach point for the source media url. Optional filesystem name of the filesystem used in the iso file. Defaults to "auto". iso:/?iso=CD1.iso&url=nfs://server/path/to/media
    iso:/?iso=CD1.iso&url=hd:/?device=/dev/hda
    iso:/subdir?iso=DVD1.iso&url=nfs://nfs-server/directory&mnt=/nfs/attach/point&filesystem=udf

NFS exported directory tree
    To use NFSv4 either use schema tnfsv4:// or pass an optional parameter type=nfs4. Additional mountoptions can be passed as comma separated list. Defaults to "ro". nfs://nfs-server/exported/path
    nfs://nfs-server/exported/path?mountoptions=ro&type=nfs4
    nfs4://nfs-server/exported/path?mountoptions=ro

CIFS/SMB directory tree
    There is no difference between cifs and smb scheme (any more). In both cases the cifs filesystem is used. Additional mountoptions can be passed as comma separated list. Defaults to "ro,guest". Specify "noguest" to turn off "guest". This is necessary if Samba is configured to reject guest connections. Optional workgroup or domain parameter set the name of the workgroup. As alternative to passing username:password in the URI authority the parameters user and pass can be used. smb://servername/share/path/on/the/share
    cifs://usenr:passw@servername/share/path/on/the/share?mountoptions=ro,noguest
    cifs://usern:passw@servername/share/path/on/the/share?workgroup=mygroup
    cifs://servername/share/path/on/the/share?user=usern&pass=passw

Apart from the above, repositories have several other properties which can be set using the commands described in this section below, or by manually editing the repository definition files (.repo files, see section FILES).

addrepo (ar) [options] <URI> <alias>

addrepo (ar) [options] <FILE.repo>
    Add a new repository specified by URI and assign specified alias to it or specify URI to a .repo file. Newly added repositories have auto-refresh disabled by default (except for repositories imported from a .repo, having the auto-refresh enabled). To enable auto-refresh, use the --refresh option of the modifyrepo command. Also, this command does not automatically refresh the newly added repositories. The repositories will get refreshed when used for the first time, or you can use the refresh command after finishing your modifications with *repo commands. See also METADATA REFRESH POLICY section for more details.

-r, --repo <file.repo>
    Read URI and alias from specified .repo file

-t, --type <type>
    Type of repository (yast2, rpm-md, or plaindir). There are several aliases defined for these types: yast2 - susetags, yast, YaST, YaST2, YAST; rpm-md - repomd, rpmmd, yum, YUM; plaindir - Plaindir.

-d, --disable
    Add the repository as disabled. Repositories are added as enabled by default.

-c, --check
    Probe given URI.

-C, --nocheck
    Don't probe URI, probe later during refresh.

-n, --name
    Specify descriptive name for the repository.

-k, --keep-packages
    Enable RPM files caching for the repository.

-K, --no-keep-packages
    Disable RPM files caching.

-f, --refresh
    Enable autorefresh of the repository. The autorefresh is disabled by default when adding new repositories.

Examples:
    Add an HTTP repository, probe it, name it 'Packman 11.1 repo', and use 'packman' as alias:
    $ zypper ar -c -n 'Packman 11.1 repo' http://packman.iu-bremen.de/suse/11.1 packman Add repositories from a repo file:
    $ zypper ar http://download.opensuse.org/repositories/zypp:/svn/openSUSE_Factory/zypp:svn.repo
    $ zypper ar myreposbackup.repo

removerepo (rr) [options] <alias|name|#|URI> ...
    Delete repositories specified by aliases, names, numbers or URIs.

--loose-auth
    Ignore user authentication data in the URI

--loose-query
    Ignore query string in the URI

repos (lr) [options] [repo] ...
    List all defined repositories or show detailed information about those specified as arguments

    The following data can be printed for each repository found on the sytem: # (repository number), Alias (shorthand for Name), Name, Enabled (whether the repository is enabled), Refresh (whether auto-refresh is enabled for the repository), Priority, Type (repository meta-data type: rpm-md, yast2, plaindir). Which of the data is shown is determined by command line options listed below and the main.repoListColumns setting from zypper.conf. By default, #, Alias, Name, Enabled, and Refresh is shown. Repository number is a unique identifier of the repository in current set of repositories. If you add, remove or change a repository, the numbers may change. Keep that in mind when using the numbers with the repository handling commands. On the other hand, using the alias instead of the number is always safe. To show detailed information about specific repositories, specify them as arguments, either by alias, name, number from simple zypper lr, or by URI; e.g. fB zypper lr factory, or zypper lr 2.

-e, --export <FILE.repo|->
    This option causes zypper to write repository definition of all defined repositories into a single file in repo file format. If '-' is specified instead of a file name, the repositories will be written to the standard output.

-a, --alias
    Add alias column to the output.

-n, --name
    Add name column to the output.

-u, --uri
    Add base URI column to the output.

-p, --priority
    Add repository priority column to the output.

-r, --refresh
    Add the autorefresh column to the output.

-d, --details
    Show more information like URI, priority, type, etc.

-E, --show-enabled-only
    Show enabled repositories only.

-U, --sort-by-uri
    Add base URI column and sort the list it.

-P, --sort-by-priority
    Add repository priority column and sort the list by it.

-A, --sort-by-alias
    Sort the list by alias.

-N, --sort-by-name
    Sort the list by name.

Examples:
    Backup your repository setup:
    $ zypper repos -e myreposbackup.repo List repositories with their URIs and priorities:
    $ zypper lr -pu

renamerepo (nr) <alias|name|#|URI> <new-alias>
    Assign new alias to the repository specified by alias, name, number, or URI.

Example:
    Rename repository number 8 to 'myrepo' (useful if the repo has some dreadful alias which is not usable on the command line).
    $ zypper nr 8 myrepo

modifyrepo (mr) <options> <alias|name|#|URI> ...

modifyrepo (mr) <options> <--all|--remote|--local|--medium-type>
    Modify properties of repositories specified by alias, name, number, or URI or one of the aggregate options.

-e, --enable
    Enable the repository.

-d, --disable
    Disable the repository.

-r, --refresh
    Enable auto-refresh for the repository.

-R, --no-refresh
    Disable auto-refresh for the repository.

-p, --priority <positive-integer>
    Set priority of the repository. Priority of 1 is the highest, the higher the number the lower the priority. Default priority is 99. Packages from repositories with higher priority will be preferred even in case there is a higher installable version available in the repository with a lower priority.

-n, --name
    Set a descriptive name for the repository.

-k, --keep-packages
    Enable RPM files caching.

-K, --no-keep-packages
    Disable RPM files caching.

-a, --all
    Apply changes to all repositories.

-l, --local
    Apply changes to all local repositories.

-t, --remote
    Apply changes to all remote repositories (http/https/ftp).

-m, --medium-type <type>
    Apply changes to repositories of specified type. The type corresponds to the repository URI scheme identifier like http, dvd, etc. You can find complete list of valid types at http://en.opensuse.org/openSUSE:Libzypp_URIs.

Examples:
    Enable keeping of packages for all remote repositories:
    $ zypper mr -kt Enable repository 'updates' and switch on autorefresh for the repo:
    $ zypper mr -er updates Disable all repositories:
    $ zypper mr -da

refresh (ref) [alias|name|#|URI] ...
    Refresh repositories specified by their alias, name, number, or URI. If no repositories are specified, all enabled repositories will be refreshed.

    See also METADATA REFRESH POLICY section for more details.

-f, --force
    Force a complete refresh of specified repositories. This option will cause both the download of raw metadata and parsing of the metadata to be forced even if everything indicates a refresh is not needed.

-b, --force-build
    Force only reparsing of cached metadata and rebuilding of the database. Raw metadata download will not be forced.

-d, --force-download
    Force only download of current copy of repository metadata. Parsing and rebuild of the database will not be forced.

-B, --build-only
    Only parse the metadata and build the database, don't download raw metadata into the cache. This will enable you to repair damaged database from cached data without accessing network at all.

-D, --download-only
    Only download the raw metadata, don't parse it or build the database.

-s, --services
    Refresh also services before refreshing repositories.

clean (cc) [options] [alias|name|#|URI] ...
    Clean the local caches for all known or specified repositories. By default,
     only caches of downloaded packages are cleaned.

-m, --metadata
    Clean repository metadata cache instead of package cache.

-M, --raw-metadata
    Clean repository raw metadata cache instead of package cache.

-a, --all
    Clean both repository metadata and package caches.

  Service Management
The services, addservice, removeservice, modifyservice, and refresh-services commands serve for manipulating services. A service is specified by its URI and needs to have a unique alias defined (among both services and repositories). Standalone repositories (not belonging to any service) are treated like services, too. The ls command will list them, ms command will modify them, etc. Repository specific options, like --keep-packages are not available here, though. You can use repository handling commands to manipulate them.

addservice (as) [options] <URI> <alias>
    Adds a service specified by URI to the system. The alias must be unique and serves to identify the service. Newly added services are not refereshed automatically. Use the refresh-services command to refresh them. Zypper does not access the service URI when adding the service, so the type of the services is unknown until it is refreshed. This command also allows to add also ordinary repositories when used with --type option, where you specify the type of the repository. See the addrepo command for the list of supported repository types.

-t, --type <TYPE>
    Type of the service (possible values: ris). There are several aliases defined for this type: ris - RIS, nu, NU

-d, --disable
    Add the service as disabled.

-n, --name
    Specify descriptive name for the service.

removeservice (rs) [options] <alias|name|#|URI> ...
    Remove specified repository index service from the sytem. Removing an RIS service will result in removing of all of its repositories.

--loose-auth
    Ignore user authentication data in the URI.

--loose-query
    Ignore query string in the URI.

modifyservice (ms) <options> <alias|name|#|URI>
    modifyservice (ms) <options> <--all|--remote|--local|--medium-type> Modify properties of specified services.

Common Options
    These options are common to all types of services and repositories.

-d, --disable
    Disable the service (but don't remove it).

-e, --enable
    Enable a disabled service.

-r, --refresh
    Enable auto-refresh of the service.

-R, --no-refresh
    Disable auto-refresh of the service.

-n, --name
    Set a descriptive name for the service.

-a, --all
    Apply changes to all services.

-l, --local
    Apply changes to all local services.

-t, --remote
    Apply changes to all remote services.

-m, --medium-type <type>
    Apply changes to services of specified type.

RIS Service Specific Options
    These options are ignored by services other than Repository Index Services.

-i, --ar-to-enable <alias>
    Schedule an RIS service repository to be enabled at next service refresh.

-I, --ar-to-disable <alias>
    Schedule an RIS service repository to be disabled at next service refresh.

-j, --rr-to-enable <alias>
    Remove a RIS service repository to enable.

-J, --rr-to-disable <alias>
    Remove a RIS service repository to disable.

-k, --cl-to-enable
    Clear the list of RIS repositories to enable.

-K, --cl-to-disable
    Clear the list of RIS repositories to disable.

services (ls) [options]
    List services defined on the system.

-u, --uri
    Show also base URI of repositories.

-p, --priority
    Show also repository priority.

-d, --details
    Show more information like URI, priority, type.

-r, --with-repos
    Show also repositories belonging to the services.

-P, --sort-by-priority
    Sort the list by repository priority.

-E, --show-enabled-only
    Show enabled services only. If used together with --with-repos a disabled service owning (manually) enabled repositories is shown as well.

-U, --sort-by-uri
    Sort the list by URI.

-N, --sort-by-name
    Sort the list by name.

refresh-services (refs) [options] <alias|name|#|URI> ...
    Refreshing a service means executing the service's special task. RIS services add, remove, or modify repositories on your system based on current content of the repository index. A differing enabled/disabled state caused by manually calling modify-repo on a service repository however will not be reverted unless the --restore-status option is used, or the repository index explicitly requests the change. Services only manage defined repositories, they do not refresh them. To refresh also repositories, use --with-repos option or the refresh command.

-f, --force
    Force a complete refresh of specified services. This option will cause both the download of raw metadata and parsing of the metadata to be forced even if everything indicates a refresh is not needed.

-r, --with-repos
    Refresh also the service repositories.

-R, --restore-status
    Also restore service repositories enabled/disabled state to the repository index default. Useful after you manually changed some service repositories enabled state.

  Package Locks Management
Package locks serve the purpose of preventing changes to the set of installed packages on the system. The locks are stored in form of a query in /etc/zypp/locks file (see also locks(5)). Packages matching this query are then forbidden to change their installed status; an installed package can't be removed, not installed package can't be installed. When requesting to install or remove such locked package, you will get a dependency problem dialog.

locks (ll)
    List currently active package locks.

addlock (al) [options] <package-name> ...
    Add a package lock. Specify packages to lock by exact name or by a glob pattern using '*' and '?' wildcard characters.

-r, --repo <alias|name|#|URI>
    Restrict the lock to the specified repository.

-t, --type <type>
    Lock only packages of specified type (default: package). See section Package Types for list of available package types.

removelock (rl) [options] <lock-number|package-name> ...
    Remove specified package lock. Specify the lock to remove by its number obtained with zypper locks or by the package name.

-r, --repo <alias|name|#|URI>
    Restrict the lock to the specified repository.

-t, --type <type>
    Restrict the lock to packages of specified type (default: package). See section Package Types for list of available package types.

cleanlocks (cl)
    Remove unused locks. This command looks for locks that do not currently (with regard to repositories used) lock any package and for each such lock it asks user whether to remove it.

  Other Commands

versioncmp (vcmp) <version1> <version2>
    Compare the versions supplied as arguments and tell whether version1 is older or newer than version2 or the two version strings match. The default output is in human-friendly form. If --terse global option is used, the result is an integer number, negative/positive if version1 is older/newer than version2, zero if they match.

-m, --match
    Takes missing release number as any release. For example
    $ zypper vcmp -m 0.15.3 0.15.3-2
    0.15.3 matches 0.15.3-2
    $ zypper vcmp 0.15.3 0.15.3-2
    0.15.3 is older than 0.15.3-2

targetos (tos)
    Shows the ID string of the target operating system. The string has a form of distroname-arch. The string is determined by libzypp, the distroname is read from <current-rootdir>/etc/products.d/baseproduct and the architecture is determined from uname and CPU flags.

licenses
    Prints a report about licenses and EULAs of installed packages to standard output. First, a list of all packages and their licenses and/or EULAs is shown. This is followed by a summary, including the total number of installed packages, the number of installed packages with EULAs that required a confirmation from the user. Since the EULAs are not stored on the system and can only be read from repository metadata, the summary includes also the number of installed packages that have their counterpart in repositories. The report ends with a list of all licenses uses by the installed packages. This command can be useful for companies redistributiong a custom distribution (like appliances) to figure out what licenses they are bound by.

download
    Download rpms specified on the commandline to a local directory. Per default packages are downloaded to the libzypp package cache (/var/cache/zypp/packages; for non-root users $XDG_CACHE_HOME/zypp/packages), but this can be changed by using the global --pkg-cache-dir option. In XML output a <download-result> node is written for each package zypper tried to downlad. Upon success the local path is is found in download-result/localpath@path.

--all-matches
    Download all versions matching the commandline arguments. Otherwise only the best version of each matching package is downloaded.

--dry-run
    Don't download any package, just report what would be done.

source-download
    Download source rpms for all installed packages to a local directory.

-d, --directory <dir>
    Download all source rpms to this directory. Default is /var/cache/zypper/source-download.

--delete
    Delete extraneous source rpms in the local directory. This is the default.

--no-delete
    Do not delete extraneous source rpms.

--status
    Don't download any source rpms, but show which source rpms are missing or extraneous.

ps  After each upgrade or removal of packages, there may be running processes on the system which continue to use meanwhile deleted files. zypper ps lists all processes using deleted files, together with the corresponding files, and a service name hint, in case it's a known service. This gives a hint which services may need to be restarted after an update. Usually programs which continue to use deleted shared libraries. The list contains the following information: * PID ID of the process
    * PPID ID of the parent process
    * UID ID of the user running the process
    * Login login name of the user running the process
    * Command command used to execute the process
    * Service guessed name of the service. If an init script exists for this
               service, you can do "rcservicename restart" to restart it.
    * Files the list of the deleted files

GLOBAL OPTIONS

-h, --help
    Help. If a command is specified together with --help option, command specific help is displayed.

-V, --version
    Print zypper version number and exit.

-c, --config <file>
    Use specified zypper config file instead of the default files. Other command line options specified together with --config and having their counterpart in the config file are still prefered. The order of preference with --config is as follows: * Command line options
    * --config <file> [ /etc/zypp/zypp.conf ] (system-wide defaults for all libzypp based applications) See also FILES section for more information.

-v, --verbose
    Increase verbosity. For debugging output specify this option twice.

-q, --quiet
    Suppress normal output. Brief (esp. result notification) messages and error messages will still be printed, though. If used together with conflicting --verbose option, the --verbose option takes preference.

-A, --no-abbrev
    Do not abbreviate text in tables. By default zypper will try to abbreviate texts in some columns so that the table fits the width of the screen. If you need to see the whole text, use this option.

-t, --terse
    Terse output for machine consumption.

-s, --table-style
    Specifies table style to use. Table style is identified by an integer number. TODO

-n, --non-interactive
    Switches to non-interactive mode. In this mode zypper doesn't ask user to type answers to various prompts, but uses default answers automatically. The behaviour of this option is somewhat different than that of options like '--yes', since zypper can answer different answers to different questions. The answers also depend on other options like '--no-gpg-checks'.

-x, --xmlout
    Switches to XML output. This option is useful for scripts or graphical frontends using zypper.

-i, --ignore-unknown
    Ignore unknown packages. This option is useful for scripts.

-D, --reposd-dir <dir>
    Use the specified directory to look for the repository definition (*.repo) files. The default value is /etc/zypp/repos.d.

-C, --cache-dir <dir>
    Use an alternative root directory for all caches. The default value is /var/cache/zypp.

--raw-cache-dir <dir>
    Use the specified directory for storing raw copies of repository metadata files. The default value is /var/cache/zypp/raw.

--solv-cache-dir <dir>
    Use the specified directory to store the repository metadata cache database files (solv files). The default value is /var/cache/zypp/solv.

--pkg-cache-dir <dir>
    Use the specified directory for storing downloaded rpm packages. (see addrepo --keep-packages) The default value is /var/cache/zypp/packages.

--userdata <string>
    User data is expected to be a simple string without special chars or embedded newlines and may serve as transaction id. It will be written to all install history log entries created throughout this specific zypper call. It will also be passed on to zypp plugins executed during commit. This will enable e.g. a btrfs plugin to tag created snapshots with this string. For zypper itself this string has no special meaning.

Repository Options:

--no-gpg-checks
    Ignore GPG check failures and continue. If a GPG issue occurs when using this option zypper prints and logs a warning and automatically continues without interrupting the operation. Use this option with caution, as you can easily overlook security problems by using it.

--gpg-auto-import-keys
    If new repository signing key is found, do not ask what to do; trust and import it automatically. This option causes that the new key is imported also in non-interactive mode, where it would otherwise got rejected.

-p, --plus-repo <URI>
    Use an additional repository for this operation. The repository aliased tmp# and named by the specified URI will be added for this operation and removed at the end. You can specify this option multiple times.

--plus-content <tag>
    Additionaly use disabled repositories providing a specific keyword. Disabled repositories are refreshed and those providing the specifies keyword are temporarily endabled. To enable for example repositories which may provide additional -debuginfo or -debugsource packages use --plus-content debug. You can specify this option multiple times.

--disable-repositories
    Do not read metadata from repositories. This option will prevent loading of packages from repositories, thus making zypper work only with the installed packages (if --disable-system-resolvables was not specified).

--no-refresh
    Do not auto-refresh repositories (ignore the auto-refresh setting). Useful to save time when doing operations like search, if there is not a need to have a completely up to date metadata.

--no-cd
    Ignore CD/DVD repositories. When this option is specified, zypper acts as if the CD/DVD repositories were not defined at all.

--no-remote
    Ignore remote repositories like http, ftp, smb and similar. This makes using zypper easier when being offline. When this option is specified, zypper acts as if the remote repositories were not defined at all.

Target Options:

-R, --root <dir>
    Operates on a different root directory. This option influences the location of the repos.d directory and the metadata cache directory and also causes rpm to be run with the --root option to do the actual installation or removal of packages. Note that the ZYpp lock is still created in the original system, as well as temporary files. See also the FILES section.

--disable-system-resolvables
    This option serves mainly for testing purposes. It will cause zypper to act as if there were no packages installed in the system. Use with caution as you can damage your system using this option.

FILES

/etc/zypp/zypper.conf, $HOME/.zypper.conf
    Global (system-wide) and user's configuration file for zypper. These files are read when zypper starts up and --config option is not used. User's settings are prefered over global settings. Similarly, command line options override the settings in either of these files. To sum it up, the order of preference is as follows (from highest to lowest): * Command line options
    * $HOME/.zypper.conf
    * /etc/zypp/zypper.conf [ /etc/zypp/zypp.conf ] (system-wide defaults for all libzypp based applications) See the comments in /etc/zypp/zypper.conf for a list and description of available options.

/etc/zypp/zypp.conf
    ZYpp configuration file affecting all libzypp based applications. See the comments in the file for desciption of configurable properties. Many locations of files and directories listed in this section are configurable via zypp.conf. The location for this file itself can be redefined only by setting $ZYPP_CONF in the environment.

/etc/zypp/locks
    File with package lock definitions, see locks(5) manual page for details. The package lock commands (addlock, removelock, etc.) can be used to manipulate this file. This file is used by all ZYpp-based applications.

/etc/zypp/repos.d
    Directory containing repository definition (*.repo) files. You can use the Repository Management commands to manipulate these files, or you can edit them yourself. In either case, after doing the modifications, executing zypper refresh is strongly recommended. This directory is used by all ZYpp-based applications. You can use the --reposd-dir global option to use an alternative directory for this purpose or the --root option to make this directory relative to the specified root directory.

/etc/zypp/services.d
    Directory containing service definition (*.service) files. You can use the Service Management Commands to manipulate theese files, or you can edit them youself. Running zypper refs is recommended after modifications have been done. This directory is used by all ZYpp-based applications.

/var/cache/zypp/raw
    Directory for storing raw metadata contained in repositories. This directory is used by all ZYpp-based applications. Use the --raw-cache-dir global option to use an alternative directory for this purpose or the --root option to make this directory relative to the specified root directory.

/var/cache/zypp/solv
    Directory containing preparsed metadata in form of solv files. This directory is used by all ZYpp-based applications.

/var/cache/zypp/packages
    If keeppackages property is set for a repository (see the modifyrepo command), all the RPM file downloaded during installation will be kept here. See also the clean command for cleaning these cache directories. This directory is used by all ZYpp-based applications.

/var/log/zypp/history
    Installation history log.

~/.zypper_history
    Command history for the shell.

EXIT CODES

There are several exit codes defined for zypper for use e.g. within scripts. These codes are defined in header file src/zypper-main.h found in zypper source package. Codes from interval (1-5) denote an error, numbers (100-105) provide a specific information, 0 represents a normal successful run. Following is a list of these codes with descriptions.

0 - ZYPPER_EXIT_OK
    Successfull run of zypper with no special info.

1 - ZYPPER_EXIT_ERR_BUG
    Unexpected situation occured, probably caused by a bug.

2 - ZYPPER_EXIT_ERR_SYNTAX
    zypper was invoked with an invalid command or option, or a bad syntax.

3 - ZYPPER_EXIT_ERR_INVALID_ARGS
    Some of provided arguments were invalid. E.g. an invalid URI was provided to the addrepo command.

4 - ZYPPER_EXIT_ERR_ZYPP
    A problem is reported by ZYPP library.

5 - ZYPPER_EXIT_ERR_PRIVILEGES
    User invoking zypper has insufficient privileges for specified operation.

6 - ZYPPER_EXIT_NO_REPOS
    No repositories are defined.

7 - ZYPPER_EXIT_ZYPP_LOCKED
    The ZYPP library is locked, e.g. packagekit is running.

100 - ZYPPER_EXIT_INF_UPDATE_NEEDED
    Returned by the patch-check command if there are patches available for installation.

101 - ZYPPER_EXIT_INF_SEC_UPDATE_NEEDED
    Returned by the patch-check command if there are security patches available for installation.

102 - ZYPPER_EXIT_INF_REBOOT_NEEDED
    Returned after a successfull installation of a patch which requires reboot of computer.

103 - ZYPPER_EXIT_INF_RESTART_NEEDED
    Returned after a successfull installation of a patch which requires restart of the package manager itself. This means that one of patches to be installed affects the package manager itself and the command used (e.g. zypper update) needs to be executed once again to install any remaining patches.

104 - ZYPPER_EXIT_INF_CAP_NOT_FOUND
    Returned by the install and the remove command in case any of the arguments does not match any of the available (or installed) package names or other capabilities.

105 - ZYPPER_EXIT_ON_SIGNAL
    Returned upon exiting after receiving a SIGINT or SIGTERM.

HOMEPAGE
http://en.opensuse.org/Portal:Zypper

AUTHORS

Martin Vidner <mvidner@suse.cz>
Jan Kupec <>
Michael Andres <ma@suse.de>
Duncan Mac-Vicar <dmacvicar@suse.de>
Josef Reidinger <jreidinger@suse.cz>
Stanislav Visnovsky <visnov@suse.cz>

SEE ALSO

locks(5), zypper-log(8), YaST2(8)