Open or load a picture file into the main transmit
window. So that the picture can be transmitted or
edited.
Key-binding: Ctrl+O
Save
Saves the file you have edited in the main transmit window.
Key-binding: Ctrl+S
Print
This will bring up the Print Destination panel and let you print the image displayed
in the main transmit window.
Key-binding: Ctrl+P
Quit
Shutdown the QSSTV program.
Key-binding: Ctrl+Q
Options
Key-binding: Alt+O
Test Frequency
This options allows setting of a test tone from 1000
to 2500Hz for a duration of 0 to 99 seconds. Then
the test tone can be transmitted by selecting the
<OK> button. For example: This option would allow
for accurate tuning to a stations frequency by
transmitting a 1200HZ tone. The other station, would
then use the spectrum display to align on the 1200HZ
tone being transmitted.
The default values on start-up are defined in the Configuration window
Opens or loads a file in the main transmit window (starts by default in the tranmit directory.
Saves the file you have in the main receive window to the default transmit directory.
This will bring up the Print Destination panel and let you print
the image displayed in the main receive window
Start transmitting the current picture in the main
transmit window. The banner and time-stamp will be
added to the picture if these options are selected.
This will also activate the radios PTT line when
connected via the computers serial port.
This will turn off QSSTV transmit. It can take a while before the transmission
is actually stopped, depending on the buffersize.
This will transmit a 1750Hz tone for 2.5 seconds.
This button is used to open SSTV repeaters.
Use this to erase the current image from the transmit
window. This does not delete the file.
This will bring up the Edit Window letting you draw
lines,add text and pictures.
When you click on this button. The default position
window opens. This lets you define the position of
the loaded image , when the image is larger or
smaller than the canvas.
``This is further explained below.
image_pos
''
This will give you an enlarged (stretchable) view of
the current picture. The zoom window can also be
accessed by clicking with the right mouse button in
the main transmit window.
