# -*- coding: utf-8 -*-

"""
packet.py - definitions and classes for Python querying of NTP

Freely translated from the old C ntpq code by ESR, with comments
preserved.  The idea was to cleanly separate ntpq-that-was into a
thin front-end layer handling mainly command interpretation and a
back-end that presents the take from ntpd as objects that can be
re-used by other front ends. Other reusable pieces live in util.py.

This code should be Python2-vs-Python-3 agnostic.  Keep it that way!

Here are some pictures to help make sense of this code. First, from RFC 5905,
the general structure of an NTP packet (Figure 8):

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |LI | VN  |Mode |    Stratum    |     Poll      |  Precision    |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                         Root Delay                            |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                         Root Dispersion                       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                          Reference ID                         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      +                     Reference Timestamp (64)                  +
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      +                      Origin Timestamp (64)                    +
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      +                      Receive Timestamp (64)                   +
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      +                      Transmit Timestamp (64)                  +
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      .                                                               .
      .                    Extension Field 1 (variable)               .
      .                                                               .
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      .                                                               .
      .                    Extension Field 2 (variable)               .
      .                                                               .
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                          Key Identifier                       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      |                           digest (128)                        |
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

The fixed header is 48 bytes long.  The simplest possible case of an
NTP packet is the minimal SNTP request, a mode 3 packet with the
Stratum and all following fields zeroed out to byte 47.

How to interpret these fields:

The modes are as follows:

+-------+--------------------------+
| Value | Meaning                  |
+-------+--------------------------+
| 0     | reserved                 |
| 1     | symmetric active         |
| 2     | symmetric passive        |
| 3     | client                   |
| 4     | server                   |
| 5     | broadcast                |
| 6     | NTP control message      |
| 7     | reserved for private use |
+-------+--------------------------+

While the Stratum field has 8 bytes, only values 0-16 (low 5 bits)
are legal. Value 16 means 'unsynchronized' Values 17-255 are reserved.

LI (Leap Indicator), Version, Poll, and Precision are not described
here; see RFC 5905.

t_1, the origin timestamp, is the time according to the client at
which the request was sent.

t_2, the receive timestamp, is the time according to the server at
which the request was received.

t_3, the transmit timestamp, is the time according to the server at
which the reply was sent.

You also need t_4, the destination timestamp, which is the time according to
the client at which the reply was received.  This is not in the reply packet,
it's the packet receipt time collected by the client.

The 'Reference timestamp' is an unused historical relic.  It's supposed to be
copied unchanged from upstream in the stratum hierarchy. Normal practice
has been for Stratum 1 servers to fill it in with the raw timestamp from the
most recent reference-clock.

Theta is the thing we want to estimate: the offset between the server
clock and the client clock. The sign convention is that theta is
positive if the server is ahead of the client.

Theta is estimated by [(t_2-t_1)+(t_3-t_4)]/2. The accuracy of this
estimate is predicated upon network latency being symmetrical.

Delta is the network round trip time, i.e. (t_4-t_1)-(t_3-t_2). Here's
how the terms work: (t_4-t_1) is the total time that the request was
in flight, and (t_3-t_2) is the time that the server spent processing it;
when you subtract that out you're left with just network delays.

Lambda nominally represents the maximum amount by which theta could be
off. It's computed as delta/2 + epsilon. The delta/2 term usually
dominates and represents the maximum amount by which network asymmetry
could be throwing off the calculation. Epsilon is the sum of three
other sources of error:

rho_r: the (im)precision field from response packet, representing the
server's inherent error in clock measurement.

rho_s: the client's own (im)precision.

PHI*(t_4-t_1): The amount by which the client's clock may plausibly
have drifted while the packet was in flight. PHI is taken to be a
constant of 15ppm.

rho_r and rho_s are estimated by making back-to-back calls to
clock_gettime() (or similar) and taking their difference. They're
encoded on the wire as an eight-bit two's complement integer
representing, to the nearest integer, log_2 of the value in seconds.

If you look at the raw data, there are 3 unknowns:
   * transit time client to server
   * transit time server to client
   * clock offset
but there are only two equations, so you can't solve it.

NTP gets the 3rd equation by assuming the transit times are equal.  That lets
it solve for the clock offset.

If you assume that both clocks are accurate which is reasonable if you have
GPS at both ends, then you can easily solve for the transit times in each
direction.

The RFC 5905 diagram is slightly out of date in that the digest header assumes
a 128-bit (16-octet) MD5 hash, but it is also possible for the field to be a
128-bit AES_CMAC hash or 160-bit (20-octet) SHA-1 hash.  NTPsec will
support any 128- or 160-bit MAC type in libcrypto.

An extension field consists of a 16-bit network-order type field
length, followed by a 16-bit network-order payload length in octets,
followed by the payload (which must be padded to a 4-octet boundary).

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |         Type field             |      Payload length          |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      |                        Payload (variable)                     |
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

Here's what a Mode 6 packet looks like:

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |LI | VN  | 6   |R|E|M|  Opcode  |          Sequence            |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |               Status           |       Association ID         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |               Offset           |            Count             |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      .                                                               .
      .                        Payload (variable)                     .
      .                                                               .
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                          Key Identifier                       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      |                           digest (128)                        |
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

In this case, the fixed header is 24 bytes long.

R = Response bit
E = Error bit
M = More bit.

A Mode 6 packet cannot have extension fields.

"""
# SPDX-License-Identifier: BSD-2-Clause
from __future__ import print_function, division
import getpass
import hmac
import os
import random
import select
import socket
import string
import struct
import sys
import time
import ntp.control
import ntp.magic
import ntp.ntpc
import ntp.util
import ntp.poly


# Limit on packets in a single Mode 6 response.  Increasing this value to
# 96 will marginally speed "mrulist" operation on lossless networks
# but it has been observed to cause loss on WiFi networks and with
# an IPv6 go6.net tunnel over UDP.  That loss causes the request
# row limit to be cut in half, and it grows back very slowly to
# ensure forward progress is made and loss isn't triggered too quickly
# afterward.  While the lossless case gains only marginally with
# MAXFRAGS == 96, the lossy case is a lot slower due to the repeated
# timeouts.  Empirically, MAXFRAGS == 32 avoids most of the routine loss
# on both the WiFi and UDP v6 tunnel tests and seems a good compromise.
# This suggests some device in the path has a limit of 32 ~512 byte UDP
# packets in queue.
# Lowering MAXFRAGS may help with particularly lossy networks, but some
# ntpq commands may rely on the longtime value of 24 implicitly,
# assuming a single multipacket response will be large enough for any
# needs.  In contrast, the "mrulist" command is implemented as a series
# of requests and multipacket responses to each.
MAXFRAGS = 32

# Requests are automatically retried once, so total timeout with no
# response is a bit over 2 * DEFTIMEOUT, or 10 seconds.  At the other
# extreme, a request eliciting 32 packets of responses each for some
# reason nearly DEFSTIMEOUT seconds after the prior in that series,
# with a single packet dropped, would take around 32 * DEFSTIMEOUT, or
# 93 seconds to fail each of two times, or 186 seconds.
# Some commands involve a series of requests, such as "peers" and
# "mrulist", so the cumulative timeouts are even longer for those.
DEFTIMEOUT = 5000
DEFSTIMEOUT = 3000

# The maximum keyid for authentication, keyid is a 16-bit field
MAX_KEYID = 0xFFFF

# Some constants (in Bytes) for mode6 and authentication
MODE_SIX_HEADER_LENGTH = 12
MINIMUM_MAC_LENGTH = 16
KEYID_LENGTH = 4
MODE_SIX_ALIGNMENT = 8
MAX_BARE_MAC_LENGTH = 20


class Packet:
    "Encapsulate an NTP fragment"
    # The following two methods are copied from macros in includes/control.h
    @staticmethod
    def VN_MODE(v, m):
        return (((v & 7) << 3) | (m & 0x7))

    @staticmethod
    def PKT_LI_VN_MODE(l, v, m):
        return (((l & 3) << 6) | Packet.VN_MODE(v, m))

    def __init__(self, mode=ntp.magic.MODE_CLIENT,
                 version=ntp.magic.NTP_VERSION, session=None):
        self.session = session  # Where to get session context
        self.li_vn_mode = 0     # leap, version, mode (uint8_t)
        # Subclasses have variable fields here
        self.extension = b''     # extension data
        self.li_vn_mode = Packet.PKT_LI_VN_MODE(ntp.magic.LEAP_NOTINSYNC,
                                                version, mode)

    # These decorators will allow us to assign the extension Python 3 strings
    @property
    def extension(self):
        return self.__extension

    @extension.setter
    def extension(self, x):
        self.__extension = ntp.poly.polybytes(x)

    def leap(self):
        return ("no-leap", "add-leap", "del-leap",
                "unsync")[ntp.magic.PKT_LEAP(self.li_vn_mode)]

    def version(self):
        return (self.li_vn_mode >> 3) & 0x7

    def mode(self):
        return self.li_vn_mode & 0x7


class SyncException(BaseException):  # pragma: no cover
    def __init__(self, message, errorcode=0):
        self.message = message
        self.errorcode = errorcode

    def __str__(self):
        return self.message


class SyncPacket(Packet):
    "Mode 1-5 time-synchronization packet, including SNTP."
    format = "!BBBbIIIQQQQ"
    HEADER_LEN = 48
    UNIX_EPOCH = 2208988800     # Midnight 1 Jan 1970 in secs since NTP epoch
    PHI = 15 * 1e-6             # 15ppm

    def __init__(self, data=''):
        Packet.__init__(self)
        self.status = 0         # status word for association (uint16_t)
        self.stratum = 0
        self.poll = 0
        self.precision = 0
        self.root_delay = 0
        self.root_dispersion = 0
        self.refid = 0
        self.reference_timestamp = 0
        self.origin_timestamp = 0
        self.receive_timestamp = 0
        self.transmit_timestamp = 0
        self.extension = ''
        self.extfields = []
        self.mac = ''
        self.hostname = None
        self.resolved = None
        self.received = SyncPacket.posix_to_ntp(time.time())
        self.trusted = True
        self.rescaled = False
        if data:
            self.analyze(ntp.poly.polybytes(data))

    def analyze(self, data):
        datalen = len(data)
        if datalen < SyncPacket.HEADER_LEN or (datalen & 3) != 0:
            raise SyncException("impossible packet length")
        (self.li_vn_mode,
         self.stratum,
         self.poll,
         self.precision,
         self.root_delay,
         self.root_dispersion,
         self.refid,
         self.reference_timestamp,
         self.origin_timestamp,
         self.receive_timestamp,
         self.transmit_timestamp) = struct.unpack(
            SyncPacket.format, data[:SyncPacket.HEADER_LEN])
        self.extension = data[SyncPacket.HEADER_LEN:]
        # Parse the extension field if present. We figure out whether
        # an extension field is present by measuring the MAC size. If
        # the number of 4-octet words following the packet header is
        # 0, no MAC is present and the packet is not authenticated. If
        # 1, the packet is a crypto-NAK; if 3, the packet is
        # authenticated with DES; if 5, the packet is authenticated
        # with MD5; if 6, the packet is authenticated with SHA1. If 2
        # or 4, the packet is a runt and discarded forthwith. If
        # greater than 6, an extension field is present, so we
        # subtract the length of the field and go around again.
        payload = self.extension  # Keep extension intact for flatten()
        while len(payload) > 24:
            (ftype, flen) = struct.unpack("!II", payload[:8])
            self.extfields.append((ftype, payload[8:8+flen]))
            payload = payload[8+flen:]
        if len(payload) == 4:    # Crypto-NAK
            self.mac = payload
        elif len(payload) == 12:   # DES
            raise SyncException("Unsupported DES authentication")
        elif len(payload) in (8, 16):
            raise SyncException("Packet is a runt")
        elif len(payload) in (20, 24):   # MD5 or SHA1
            self.mac = payload

    @staticmethod
    def ntp_to_posix(t):
        "Scale from NTP time to POSIX time"
        # Note: assumes we're in the same NTP era as the transmitter...
        return (t / (2**32)) - SyncPacket.UNIX_EPOCH

    @staticmethod
    def posix_to_ntp(t):
        "Scale from POSIX time to NTP time"
        # Note: assumes we're in the same NTP era as the transmitter...
        # This receives floats, can't use shifts
        return int((t + SyncPacket.UNIX_EPOCH) * 2**32)

    def posixize(self):
        "Rescale all timestamps to POSIX time."
        if not self.rescaled:
            self.rescaled = True
            self.root_delay >>= 16
            self.root_dispersion >>= 16
            self.reference_timestamp = SyncPacket.ntp_to_posix(
                self.reference_timestamp)
            self.origin_timestamp = SyncPacket.ntp_to_posix(
                self.origin_timestamp)
            self.receive_timestamp = SyncPacket.ntp_to_posix(
                self.receive_timestamp)
            self.transmit_timestamp = SyncPacket.ntp_to_posix(
                self.transmit_timestamp)
            self.received = SyncPacket.ntp_to_posix(self.received)

    def t1(self):
        return self.origin_timestamp

    def t2(self):
        return self.receive_timestamp

    def t3(self):
        return self.transmit_timestamp

    def t4(self):
        return self.received

    def delta(self):
        "Packet flight time"
        return (self.t4() - self.t1()) - (self.t3() - self.t2())

    def epsilon(self):
        "Residual error due to clock imprecision."
        # FIXME: Include client imprecision.
        return SyncPacket.PHI * (self.t4() - self.t1()) + 2**self.precision

    def synchd(self):
        "Synchronization distance, estimates worst-case error in seconds"
        # This is "lambda" in NTP-speak, but that's a Python keyword
        return abs(self.delta()/2 + self.epsilon())

    def adjust(self):
        "Adjustment implied by this packet - 'theta' in NTP-speak."
        return ((self.t2()-self.t1())+(self.t3()-self.t4()))/2

    def flatten(self):
        "Flatten the packet into an octet sequence."
        body = struct.pack(SyncPacket.format,
                           self.li_vn_mode,
                           self.stratum,
                           self.poll,
                           self.precision,
                           self.root_delay,
                           self.root_dispersion,
                           self.refid,
                           self.reference_timestamp,
                           self.origin_timestamp,
                           self.receive_timestamp,
                           self.transmit_timestamp)
        return body + self.extension

    def refid_octets(self):
        "Analyze refid into octets."
        return ((self.refid >> 24) & 0xff,
                (self.refid >> 16) & 0xff,
                (self.refid >> 8) & 0xff,
                self.refid & 0xff)

    def refid_as_string(self):
        "Sometimes it's a clock name or KOD type"
        return ntp.poly.polystr(struct.pack(*(("BBBB",) + self.refid_octets())))

    def refid_as_address(self):
        "Sometimes it's an IPV4 address."
        return ntp.poly.polystr("%d.%d.%d.%d" % self.refid_octets())

    def is_crypto_nak(self):
        return len(self.mac) == 4

    def has_MD5(self):
        return len(self.mac) == 20

    def has_SHA1(self):
        return len(self.mac) == 24

    def __repr__(self):
        "Represent a posixized sync packet in an eyeball-friendly format."
        r = "<NTP:%s:%d:%d:" % (self.leap(), self.version(), self.mode())
        r += "%f:%f" % (self.root_delay, self.root_dispersion)
        rs = self.refid_as_string()
        if not all(c in string.printable for c in rs):
            rs = self.refid_as_address()
        r += ":" + rs
        r += ":" + ntp.util.rfc3339(
            SyncPacket.ntp_to_posix(self.reference_timestamp))
        r += ":" + ntp.util.rfc3339(
            SyncPacket.ntp_to_posix(self.origin_timestamp))
        r += ":" + ntp.util.rfc3339(
            SyncPacket.ntp_to_posix(self.receive_timestamp))
        r += ":" + ntp.util.rfc3339(
            SyncPacket.ntp_to_posix(self.transmit_timestamp))
        if self.extfields:
            r += ":" + repr(self.extfields)
        if self.mac:
            r += ":" + repr(self.mac)[1:-1]
        r += ">"
        return r


class ControlPacket(Packet):
    "Mode 6 request/response."

    def __init__(self, session, opcode=0, associd=0, qdata=''):
        Packet.__init__(self, mode=ntp.magic.MODE_CONTROL,
                        version=session.pktversion,
                        session=session)
        self.r_e_m_op = opcode    # ntpq operation code
        self.sequence = 1         # sequence number of request (uint16_t)
        self.status = 0           # status word for association (uint16_t)
        self.associd = associd    # association ID (uint16_t)
        self.offset = 0           # offset of this batch of data (uint16_t)
        self.extension = qdata    # Data for this packet
        self.count = len(qdata)   # length of data
    format = "!BBHHHHH"
    HEADER_LEN = 12

    def is_response(self):
        return True if self.r_e_m_op & 0x80 else False

    def is_error(self):
        return True if self.r_e_m_op & 0x40 else False

    def more(self):
        return True if self.r_e_m_op & 0x20 else False

    def opcode(self):
        return self.r_e_m_op & 0x1F

    def errcode(self):
        return (self.status >> 8) & 0xff

    def end(self):
        return self.count + self.offset

    def stats(self):
        "Return statistics on a fragment."
        return "%5d %5d\t%3d octets\n" % (self.offset, self.end(), self.count)

    def analyze(self, rawdata):
        rawdata = ntp.poly.polybytes(rawdata)
        (self.li_vn_mode,
         self.r_e_m_op,
         self.sequence,
         self.status,
         self.associd,
         self.offset,
         self.count) = struct.unpack(ControlPacket.format,
                                     rawdata[:ControlPacket.HEADER_LEN])
        self.extension = rawdata[ControlPacket.HEADER_LEN:]
        return (self.sequence, self.status, self.associd, self.offset)

    def flatten(self):
        "Flatten the packet into an octet sequence."
        body = struct.pack(ControlPacket.format,
                           self.li_vn_mode,
                           self.r_e_m_op,
                           self.sequence,
                           self.status,
                           self.associd,
                           self.offset,
                           self.count)
        return body + self.extension

    def send(self):
        self.session.sendpkt(self.flatten())


class Peer:
    "The information we have about an NTP peer."

    def __init__(self, session, associd, status):
        self.session = session
        self.associd = associd
        self.status = status
        self.variables = {}

    def readvars(self):
        self.variables = self.session.readvars()

    def __str__(self):
        return "<Peer: associd=%s status=%0x>" % (self.associd, self.status)
    __repr__ = __str__


SERR_BADFMT = "***Server reports a bad format request packet\n"
SERR_PERMISSION = "***Server disallowed request (authentication?)\n"
SERR_BADOP = "***Server reports a bad opcode in request\n"
SERR_BADASSOC = "***Association ID {0} unknown to server\n"
SERR_UNKNOWNVAR = "***A request variable unknown to the server\n"
SERR_BADVALUE = "***Server indicates a request variable was bad\n"
SERR_UNSPEC = "***Server returned an unspecified error\n"
SERR_SOCKET = "***Socket error; probably ntpd is not running\n"
SERR_TIMEOUT = "***Request timed out\n"
SERR_INCOMPLETE = "***Response from server was incomplete\n"
SERR_TOOMUCH = "***Buffer size exceeded for returned data\n"
SERR_SELECT = "***Select call failed\n"
SERR_NOHOST = "***No host open\n"
SERR_BADLENGTH = "***Response length should have been a multiple of 4"
SERR_BADKEY = "***Invalid key identifier"
SERR_INVPASS = "***Invalid password"
SERR_NOKEY = "***Key not found"
SERR_BADNONCE = "***Unexpected nonce response format"
SERR_BADPARAM = "***Unknown parameter '%s'"
SERR_NOCRED = "***No credentials"
SERR_SERVER = "***Server error code %s"
SERR_STALL = "***No response, probably high-traffic server with low MRU limit"
SERR_BADTAG = "***Bad MRU tag %s"
SERR_BADSORT = "***Sort order %s is not implemented"
SERR_NOTRUST = "***No trusted keys have been declared"


def dump_hex_printable(xdata, outfp=sys.stdout):
    "Dump a packet in hex, in a familiar hex format"
    rowsize = 16
    while xdata:
        # Slice one row off of our data
        linedata, xdata = ntp.util.slicedata(xdata, rowsize)
        # Output data in hex form
        linelen = len(linedata)
        line = "%02x " * linelen
        # Will need linedata later
        linedata = [ntp.poly.polyord(x) for x in linedata]
        line %= tuple(linedata)
        if linelen < rowsize:  # Pad out the line to keep columns neat
            line += "   " * (rowsize - linelen)
        # Output printable data in string form
        linedata = [chr(x) if (32 <= x < 127) else "." for x in linedata]
        line += "".join(linedata) + "\n"
        outfp.write(line)


class MRUEntry:
    "A traffic entry for an MRU list."

    def __init__(self):
        self.addr = None        # text of IPv4 or IPv6 address and port
        self.last = None        # timestamp of last receipt
        self.first = None       # timestamp of first receipt
        self.mv = None          # mode and version
        self.rs = None          # restriction mask (RES_* bits)
        self.ct = 0             # count of packets received
        self.sc = None          # score
        self.dr = None          # dropped packets

    def avgint(self):
        last = ntp.ntpc.lfptofloat(self.last)
        first = ntp.ntpc.lfptofloat(self.first)
        return (last - first) / self.ct

    def sortaddr(self):
        addr = self.addr
        if addr[0] == '[':
            # IPv6   [n:n:n::n:n]:sock
            # or     [n:n:n::n:n%x]:sock
            addr = addr[1:addr.find(']')]
            pct = addr.find('%')
            if pct > 0:
                # <addr>%<n> for local IPv6 address on interface n
                addr = addr[:pct]
            return socket.inet_pton(socket.AF_INET6, addr)
        else:
            # IPv4   a.b.c.d:sock
            addr = addr[:addr.find(':')]
            # prefix with 0s so IPv6 sorts after IPv4
            # Need 16 rather than 12 to catch ::1
            return b'\0'*16 + socket.inet_pton(socket.AF_INET, addr)

    def __repr__(self):
        return "<MRUEntry: " + repr(self.__dict__)[1:-1] + ">"


class MRUList:
    "A sequence of address-timespan pairs returned by ntpd in one response."

    def __init__(self):
        self.entries = []       # A list of MRUEntry objects
        self.now = None         # server timestamp marking end of operation

    def is_complete(self):
        "Is the server done shipping entries for this span?"
        return self.now is not None

    def __repr__(self):
        return "<MRUList: entries=%s now=%s>" % (self.entries, self.now)


class ControlException(BaseException):

    def __init__(self, message, errorcode=0):
        self.message = message
        self.errorcode = errorcode

    def __str__(self):
        return self.message


class ControlSession:
    "A session to a host"
    MRU_ROW_LIMIT = 256
    _authpass = True
    server_errors = {
        ntp.control.CERR_UNSPEC: "UNSPEC",
        ntp.control.CERR_PERMISSION: "PERMISSION",
        ntp.control.CERR_BADFMT: "BADFMT",
        ntp.control.CERR_BADOP: "BADOP",
        ntp.control.CERR_BADASSOC: "BADASSOC",
        ntp.control.CERR_UNKNOWNVAR: "UNKNOWNVAR",
        ntp.control.CERR_BADVALUE: "BADVALUE",
        ntp.control.CERR_RESTRICT: "RESTRICT",
        }

    def __init__(self):
        self.debug = 0
        self.ai_family = socket.AF_UNSPEC
        self.primary_timeout = DEFTIMEOUT       # Timeout for first select
        self.secondary_timeout = DEFSTIMEOUT    # Timeout for later selects
        # Packet version number we use
        self.pktversion = ntp.magic.NTP_OLDVERSION + 1
        self.always_auth = False  # Always send authenticated requests
        self.keytype = "MD5"
        self.keyid = None
        self.passwd = None
        self.auth = None
        self.hostname = None
        self.isnum = False
        self.sock = None
        self.port = 0
        self.sequence = 0
        self.response = ""
        self.rstatus = 0
        self.ntpd_row_limit = ControlSession.MRU_ROW_LIMIT
        self.logfp = sys.stdout
        self.nonce_xmit = 0
        self.slots = 0
        self.flakey = None

    def warndbg(self, text, threshold):
        ntp.util.dolog(self.logfp, text, self.debug, threshold)

    def close(self):
        if self.sock:
            self.sock.close()
            self.sock = None

    def havehost(self):
        "Is the session connected to a host?"
        return self.sock is not None

    def __lookuphost(self, hname, fam):
        "Try different ways to interpret an address and family"
        if hname.startswith("["):
            hname = hname[1:-1]
        # First try to resolve it as an ip address and if that fails,
        # do a fullblown (DNS) lookup. That way we only use the dns
        # when it is needed and work around some implementations that
        # will return an "IPv4-mapped IPv6 address" address if you
        # give it an IPv4 address to lookup.

        def hinted_lookup(port, hints):
            return socket.getaddrinfo(hname, port, self.ai_family,
                                      socket.SOCK_DGRAM,
                                      socket.IPPROTO_UDP,
                                      hints)
        try:
            return hinted_lookup(port="ntp", hints=socket.AI_NUMERICHOST)
        except socket.gaierror as e:
            ntp.util.dolog(self.logfp,
                           "ntpq: numeric-mode lookup of %s failed, %s"
                           % (hname, e.strerror), self.debug, 3)
        try:
            return hinted_lookup(port="ntp", hints=0)
        except socket.gaierror as e1:
            if self.logfp is not None:
                self.logfp.write("ntpq: standard-mode lookup "
                                 "of %s failed, %s\n"
                                 % (hname, e1.strerror))
            # EAI_NODATA and AI_CANONNAME should both exist - they're in the
            # POSIX API.  If this code throws AttributeErrors there is
            # probably a very old and broken socket layer in your Python
            # build.  The C implementation had a second fallback mode that
            # removed AI_ADDRCONFIG if the first fallback raised BADFLAGS.
            fallback_hints = socket.AI_CANONNAME
            try:
                fallback_hints |= socket.AI_ADDRCONFIG
            except AttributeError:
                pass
            try:
                if hasattr(socket, "EAI_NODATA"):
                    errlist = (socket.EAI_NONAME, socket.EAI_NODATA)
                else:
                    errlist = (socket.EAI_NONAME,)
                if e1.errno in errlist:
                    try:
                        return hinted_lookup(port="ntp", hints=0)
                    except socket.gaierror as e2:
                        if self.logfp is not None:
                            self.logfp.write("ntpq: ndp lookup failed, %s\n"
                                             % e2.strerror)
            except AttributeError:  # pragma: no cover
                if self.logfp is not None:
                    self.logfp.write(
                        "ntpq: API error, missing socket attributes\n")
        return None

    def openhost(self, hname, fam=socket.AF_UNSPEC):
        "openhost - open a socket to a host"
        res = self.__lookuphost(hname, fam)
        if res is None:
            return False
        # C implementation didn't use multiple responses, so we don't either
        (family, socktype, protocol, canonname, sockaddr) = res[0]
        if canonname is None:
            self.hostname = socket.inet_ntop(sockaddr[0], family)
            self.isnum = True
        else:
            self.hostname = canonname or hname
            self.isnum = False
        ntp.util.dolog(self.logfp, "Opening host %s" % self.hostname,
                       self.debug, 3)
        self.port = sockaddr[1]
        try:
            self.sock = socket.socket(family, socktype, protocol)
        except socket.error as e:
            raise ControlException("Error opening %s: %s [%d]"
                                   % (hname, e.strerror, e.errno))
        try:
            self.sock.connect(sockaddr)
        except socket.error as e:
            raise ControlException("Error connecting to %s: %s [%d]"
                                   % (hname, e.strerror, e.errno))
        return True

    def password(self):
        "Get a keyid and the password if we don't have one."
        if self.keyid is None:
            if self.auth is None:
                try:
                    self.auth = Authenticator()
                except (OSError, IOError):
                    pass
            if self.auth and self.hostname == "localhost":
                try:
                    (self.keyid, self.keytype, self.passwd) \
                        = self.auth.control()
                    return
                except ValueError:
                    # There are no trusted keys.  Barf.
                    raise ControlException(SERR_NOTRUST)
            try:
                if os.isatty(0):
                    key_id = int(ntp.poly.polyinput("Keyid: "))
                else:
                    key_id = 0
                if key_id == 0 or key_id > MAX_KEYID:
                    raise ControlException(SERR_BADKEY)
            except (SyntaxError, ValueError):  # pragma: no cover
                raise ControlException(SERR_BADKEY)
            self.keyid = key_id

        if self.passwd is None:
            try:
                self.keytype, passwd = self.auth[self.keyid]
            except (IndexError, TypeError):
                passwd = getpass.getpass("%s Password: " % self.keytype)
                if passwd is None:
                    raise ControlException(SERR_INVPASS)
                # If the password is longer then 20 chars we assume it is
                # hex encoded binary string. This assumption exists across all
                # of NTP.
                if len(passwd) > 20:
                    passwd = ntp.util.hexstr2octets(passwd)
            self.passwd = passwd

    def sendpkt(self, xdata):
        "Send a packet to the host."
        while len(xdata) % 4:
            xdata += b"\x00"
        ntp.util.dolog(self.logfp,
                       "Sending %d octets.  seq=%d"
                       % (len(xdata), self.sequence), self.debug, 3)
        try:
            self.sock.sendall(ntp.poly.polybytes(xdata))
        except socket.error:
            # On failure, we don't know how much data was actually received
            if self.logfp is not None:
                self.logfp.write("Write to %s failed\n" % self.hostname)
            return -1
        if (self.debug >= 5) and (self.logfp is not None):  # pragma: no cover
            # special, not replacing with dolog()
            self.logfp.write("Request packet:\n")
            dump_hex_printable(xdata, self.logfp)
        return 0

    def sendrequest(self, opcode, associd, qdata, auth=False):
        "Ship an ntpq request packet to a server."
        if (self.debug >= 1) and (self.logfp is not None):
            # special, not replacing with dolog()
            if self.debug >= 3:
                self.logfp.write("\n")   # extra space to help find clumps
            self.logfp.write("sendrequest: opcode=%d, associd=%d, qdata=%s\n"
                             % (opcode, associd, qdata))

        # Check to make sure the data will fit in one packet
        if len(qdata) > ntp.control.CTL_MAX_DATA_LEN:
            if self.logfp is not None:
                self.logfp.write("***Internal error! Data too large (%d)\n" %
                                 len(qdata))
            return -1

        # Assemble the packet
        pkt = ControlPacket(self, opcode, associd, qdata)

        self.sequence += 1
        self.sequence %= 0x10000  # Has to fit in a struct H field
        pkt.sequence = self.sequence

        # If we have data, pad it out to a 32-bit boundary.
        # Do not include these in the payload count.
        if pkt.extension:
            pkt.extension = ntp.poly.polybytes(pkt.extension)
            while ((ControlPacket.HEADER_LEN + len(pkt.extension)) & 3):
                pkt.extension += b"\x00"

        # If it isn't authenticated we can just send it.  Otherwise
        # we're going to have to think about it a little.
        if not auth and not self.always_auth:
            return pkt.send()

        if self.keyid is None or self.passwd is None:
            raise ControlException(SERR_NOCRED)

        # Pad out packet to a multiple of 8 octets to be sure
        # receiver can handle it. Note: these pad bytes should
        # *not* be counted in the header count field.
        while ((ControlPacket.HEADER_LEN + len(pkt.extension)) & 7):
            pkt.extension += b"\x00"

        # Do the MAC compuation.
        mac = Authenticator.compute_mac(pkt.flatten(),
                                        self.keyid, self.keytype, self.passwd)
        if mac is None:
            raise ControlException(SERR_NOKEY)
        else:
            pkt.extension += ntp.poly.polybytes(mac)
        return pkt.send()

    def getresponse(self, opcode, associd, timeo):
        "Get a response expected to match a given opcode and associd."
        # This is pretty tricky.  We may get between 1 and MAXFRAG packets
        # back in response to the request.  We peel the data out of
        # each packet and collect it in one long block.  When the last
        # packet in the sequence is received we'll know how much data we
        # should have had.  Note we use one long time out, should reconsider.
        fragments = []
        self.response = ''
        seenlastfrag = False
        bail = 0
        # TODO: refactor to simplify while retaining semantic info
        if self.logfp is not None:
            warn = self.logfp.write
        else:
            warn = (lambda x: x)
        warndbg = (lambda txt, th: ntp.util.dolog(self.logfp, txt,
                                                  self.debug, th))

        warndbg("Fragment collection begins", 1)
        # Loop until we have an error or a complete response.  Nearly all
        # code paths to loop again use continue.
        while True:
            # Discarding various invalid packets can cause us to
            #  loop more than MAXFRAGS times, but enforce a sane bound
            #  on how long we're willing to spend here.
            bail += 1
            if bail >= (2*MAXFRAGS):
                raise ControlException(SERR_TOOMUCH)

            if not fragments:
                tvo = self.primary_timeout / 1000
            else:
                tvo = self.secondary_timeout / 1000

            warndbg("At %s, select with timeout %d begins"
                    % (time.asctime(), tvo), 5)
            try:
                (rd, _, _) = select.select([self.sock], [], [], tvo)
            except select.error:
                raise ControlException(SERR_SELECT)
            warndbg("At %s, select with timeout %d ends"
                    % (time.asctime(), tvo), 5)

            if not rd:
                # Timed out.  Return what we have
                if not fragments:
                    if timeo:
                        raise ControlException(SERR_TIMEOUT)
                if timeo:
                    if (self.debug >= 1) and \
                       (self.logfp is not None):  # pragma: no cover
                        # special, not replacing with dolog()
                        self.logfp.write(
                            "ERR_INCOMPLETE: Received fragments:\n")
                        for (i, frag) in enumerate(fragments):
                            self.logfp.write("%d: %s" % (i+1, frag.stats()))
                        self.logfp.write("last fragment %sreceived\n"
                                         % ("not ", "")[seenlastfrag])
                raise ControlException(SERR_INCOMPLETE)

            warndbg("At %s, socket read begins" % time.asctime(), 4)
            try:
                rawdata = ntp.poly.polybytes(self.sock.recv(4096))
            except socket.error:  # pragma: no cover
                # usually, errno 111: connection refused
                raise ControlException(SERR_SOCKET)

            if self.flakey and self.flakey >= random.random():
                warndbg('Flaky: I deliberately dropped a packet.', 1)
                rawdata = None

            warndbg("Received %d octets" % len(rawdata), 3)
            rpkt = ControlPacket(self)
            try:
                rpkt.analyze(rawdata)
            except struct.error:
                raise ControlException(SERR_UNSPEC)

            # Validate that packet header is sane, and the correct type
            valid = self.__validate_packet(rpkt, rawdata, opcode, associd)
            if not valid:  # pragma: no cover
                continue

            # Someday, perhaps, check authentication here
            if self._authpass and self.auth:
                _pend = rpkt.count + MODE_SIX_HEADER_LENGTH
                _pend += (-_pend % MODE_SIX_ALIGNMENT)
                if len(rawdata) < (_pend + KEYID_LENGTH + MINIMUM_MAC_LENGTH):
                    self.logfp.write('AUTH - packet too short for MAC %d < %d\n' %
                                     (len(rawdata), (_pend + KEYID_LENGTH + MINIMUM_MAC_LENGTH)))
                    self._authpass = False
                elif not self.auth.verify_mac(rawdata, packet_end=_pend,
                                            mac_begin=_pend):
                    self._authpass = False

            # Clip off the MAC, if any
            rpkt.extension = rpkt.extension[:rpkt.count]

            if rpkt.count == 0 and rpkt.more():
                warn("Received count of 0 in non-final fragment\n")
                continue

            if seenlastfrag and rpkt.more():  # pragma: no cover
                # I'n not sure this can be triggered without hitting another
                # error first.
                warn("Received second last fragment\n")
                continue

            # Find the most recent fragment with a
            not_earlier = [frag for frag in fragments
                           if frag.offset >= rpkt.offset]
            if not_earlier:
                not_earlier = not_earlier[0]
                if not_earlier.offset == rpkt.offset:
                    warn("duplicate %d octets at %d ignored, prior "
                         " %d at %d\n"
                         % (rpkt.count, rpkt.offset,
                            not_earlier.count, not_earlier.offset))
                    continue

            if fragments:
                last = fragments[-1]
                if last.end() > rpkt.offset:
                    warn("received frag at %d overlaps with %d octet "
                         "frag at %d\n"
                         % (rpkt.offset, last.count, last.offset))
                    continue

            if not_earlier and rpkt.end() > not_earlier.offset:
                warn("received %d octet frag at %d overlaps with "
                     "frag at %d\n"
                     % (rpkt.count, rpkt.offset, not_earlier.offset))
                continue

            warndbg("Recording fragment %d, size = %d offset = %d, "
                    " end = %d, more=%s"
                    % (len(fragments)+1, rpkt.count,
                       rpkt.offset, rpkt.end(), rpkt.more()), 3)

            # Passed all tests, insert it into the frag list.
            fragments.append(rpkt)
            fragments.sort(key=lambda frag: frag.offset)

            # Figure out if this was the last.
            # Record status info out of the last packet.
            if not rpkt.more():
                seenlastfrag = True
                self.rstatus = rpkt.status

            # If we've seen the last fragment, look for holes in the sequence.
            # If there aren't any, we're done.
            if seenlastfrag and fragments[0].offset == 0:
                for f in range(1, len(fragments)):
                    if fragments[f-1].end() != fragments[f].offset:
                        warndbg("Hole in fragment sequence, %d of %d"
                                % (f, len(fragments)), 1)
                        break
                else:
                    tempfraglist = [ntp.poly.polystr(f.extension) \
                                    for f in fragments]
                    self.response = ntp.poly.polybytes("".join(tempfraglist))
                    warndbg("Fragment collection ends. %d bytes "
                            " in %d fragments"
                            % (len(self.response), len(fragments)), 1)
                    # special loggers, not replacing with dolog()
                    if self.debug >= 5:  # pragma: no cover
                        warn("Response packet:\n")
                        dump_hex_printable(self.response, self.logfp)
                    elif self.debug >= 3:  # pragma: no cover
                        # FIXME: Garbage when retrieving assoc list (binary)
                        warn("Response packet:\n%s\n" % repr(self.response))
                    elif self.debug >= 2:  # pragma: no cover
                        # FIXME: Garbage when retrieving assoc list (binary)
                        eol = self.response.find(b"\n")
                        firstline = self.response[:eol]
                        warn("First line:\n%s\n" % repr(firstline))
                    return None
                break
        if not self._authpass:
            warn('AUTH: Content untrusted due to authentication failure!\n')

    def __validate_packet(self, rpkt, rawdata, opcode, associd):
        # TODO: refactor to simplify while retaining semantic info
        if self.logfp is not None:
            warn = self.logfp.write
        else:
            warn = (lambda x: x)
        warndbg = (lambda txt, th: ntp.util.dolog(self.logfp, txt,
                                                  self.debug, th))

        if ((rpkt.version() > ntp.magic.NTP_VERSION) or
           (rpkt.version() < ntp.magic.NTP_OLDVERSION)):
            warndbg("Fragment received with version %d"
                    % rpkt.version(), 1)
            return False
        if rpkt.mode() != ntp.magic.MODE_CONTROL:
            warndbg("Fragment received with mode %d" % rpkt.mode(), 1)
            return False
        if not rpkt.is_response():
            warndbg("Received request, wanted response", 1)
            return False

        # Check opcode and sequence number for a match.
        # Could be old data getting to us.
        if rpkt.sequence != self.sequence:
            warndbg("Received sequence number %d, wanted %d" %
                    (rpkt.sequence, self.sequence), 1)
            return False
        if rpkt.opcode() != opcode:
            warndbg("Received opcode %d, wanted %d" %
                    (rpkt.opcode(), opcode), 1)
            return False

        # Check the error code.  If non-zero, return it.
        if rpkt.is_error():
            if rpkt.more():
                warn("Error %d received on non-final fragment\n"
                     % rpkt.errcode())
            self.keyid = self.passwd = None
            raise ControlException(
                SERR_SERVER
                % ControlSession.server_errors[rpkt.errcode()],
                rpkt.errcode())

        # Check the association ID to make sure it matches what we expect
        if rpkt.associd != associd:
            warn("Association ID %d doesn't match expected %d\n"
                 % (rpkt.associd, associd))

        # validate received payload size is padded to next 32-bit
        # boundary and no smaller than claimed by rpkt.count
        if len(rawdata) & 0x3:
            warn("Response fragment not padded, size = %d\n"
                 % len(rawdata))
            return False

        shouldbesize = (ControlPacket.HEADER_LEN + rpkt.count + 3) & ~3
        if len(rawdata) < shouldbesize:
            warn("Response fragment claims %u octets payload, "
                 "above %d received\n"
                 % (rpkt.count, len(rawdata) - ControlPacket.HEADER_LEN))
            raise ControlException(SERR_INCOMPLETE)

        return True

    def doquery(self, opcode, associd=0, qdata="", auth=False):
        "send a request and save the response"
        if not self.havehost():
            raise ControlException(SERR_NOHOST)
        retry = True
        while True:
            # Ship the request
            self.sendrequest(opcode, associd, qdata, auth)
            # Get the response.
            try:
                res = self.getresponse(opcode, associd, not retry)
            except ControlException as e:
                if retry and e.message in (SERR_TIMEOUT, SERR_INCOMPLETE):
                    retry = False
                    continue
                else:
                    raise e
            break
        # Return data on success
        return res

    def readstat(self, associd=0):
        "Read peer status, or throw an exception."
        self.doquery(opcode=ntp.control.CTL_OP_READSTAT, associd=associd)
        if len(self.response) % 4:
            raise ControlException(SERR_BADLENGTH)
        idlist = []
        if associd == 0:
            for i in range(len(self.response)//4):
                data = self.response[4*i:4*i+4]
                (associd, status) = struct.unpack("!HH", data)
                idlist.append(Peer(self, associd, status))
        idlist.sort(key=lambda a: a.associd)
        return idlist

    def __parse_varlist(self, raw=False):
        "Parse a response as a textual varlist."
        # Strip out NULs and binary garbage from text;
        # ntpd seems prone to generate these, especially
        # in reslist responses.
        kvpairs = []
        instring = False
        response = ""
        self.response = ntp.poly.polystr(self.response)
        for c in self.response:
            cord = ntp.poly.polyord(c)
            if c == '"':
                response += c
                instring = not instring
            elif not instring and c == ",":
                # Separator between key=value pairs, done with this pair
                kvpairs.append(response.strip())
                response = ""
            elif 0 < cord < 127:
                # if it isn't a special case or garbage, add it
                response += c
        if response:  # The last item won't be caught by the loop
            kvpairs.append(response.strip())
        items = []
        for pair in kvpairs:
            if "=" in pair:
                key, value = ntp.util.slicedata(pair, pair.index("="))
                value = value[1:]  # Remove '='
            else:
                key, value = pair, ""
            key, value = key.strip(), value.strip()
            # Start trying to cast to non-string types
            if value:
                try:
                    castedvalue = int(value, 0)
                except ValueError:
                    try:
                        castedvalue = float(value)
                        if key == "delay" and not raw:
                            # Hack for non-raw-mode to get precision
                            items.append(("delay-s", value))
                    except ValueError:
                        if (value[0] == '"') and (value[-1] == '"'):
                            value = value[1:-1]
                        castedvalue = value  # str / unknown, stillneed casted
            else:  # no value
                castedvalue = value
            if raw:
                items.append((key, (castedvalue, value)))
            else:
                items.append((key, castedvalue))
        return ntp.util.OrderedDict(items)

    def readvar(self, associd=0, varlist=None,
                opcode=ntp.control.CTL_OP_READVAR, raw=False):
        "Read system vars from the host as a dict, or throw an exception."
        if varlist is None:
            qdata = ""
        else:
            qdata = ",".join(varlist)
        self.doquery(opcode, associd=associd, qdata=qdata)
        return self.__parse_varlist(raw)

    def config(self, configtext):
        "Send configuration text to the daemon. Return True if accepted."
        self.doquery(opcode=ntp.control.CTL_OP_CONFIGURE,
                     qdata=configtext, auth=True)
        # Copes with an implementation error - ntpd uses putdata without
        # setting the size correctly.
        if not self.response:
            raise ControlException(SERR_PERMISSION)
        elif b"\x00" in self.response:
            self.response = self.response[:self.response.index(b"\x00")]
        self.response = self.response.rstrip()
        return self.response == ntp.poly.polybytes("Config Succeeded")

    def fetch_nonce(self):
        """
Ask for, and get, a nonce that can be replayed.
This combats source address spoofing
"""
        for i in range(4):
            # retry 4 times
            self.doquery(opcode=ntp.control.CTL_OP_REQ_NONCE)
            self.nonce_xmit = time.time()
            if self.response.startswith(ntp.poly.polybytes("nonce=")):
                return ntp.poly.polystr(self.response.strip())
            # maybe a delay between tries?

        # uh, oh, no nonce seen
        # this print probably never can be seen...
        if str is bytes:
            resp = self.response
        else:
            resp = self.response.decode()
        self.logfp.write("## Nonce expected: %s" % resp)
        raise ControlException(SERR_BADNONCE)

    def __mru_analyze(self, variables, span, direct):
        """Extracts data from the key/value list into a more useful form"""
        mru = None
        nonce = None
        items = list(variables.items())
        fake_list = []
        fake_dict = {}
        if items:                   # See issue #642
            items.sort(key=mru_kv_key)
        for (tag, val) in items:
            self.warndbg("tag=%s, val=%s" % (tag, val), 4)
            if tag == "nonce":
                nonce = "%s=%s" % (tag, val)
            elif tag == "last.older":
                continue
            elif tag == "addr.older":
                continue
            if tag == "now":
                # finished marker
                span.now = ntp.ntpc.lfptofloat(val)
                continue
            elif tag == "last.newest":
                # more finished
                continue
            for prefix in ("addr", "last", "first", "ct", "mv", "rs", "sc", "dr"):
                if tag.startswith(prefix + "."):
                    (member, idx) = tag.split(".")
                    try:
                        idx = int(idx)
                    except ValueError:
                        raise ControlException(SERR_BADTAG % tag)
                    ### Does not check missing/gappy entries
                    if idx not in fake_list:
                        fake_dict[str(idx)] = {}
                        fake_list.append(idx)
                    fake_dict[str(idx)][member] = val
        fake_list.sort()
        for idx in fake_list:
            mru = MRUEntry()
            self.slots += 1
            # Always 6 in practice, in the tests not so much
#            if len(fake_dict[str(idx)]) != 6:
#                continue
            for prefix in ("addr", "last", "first", "ct", "mv", "rs", "sc", "dr"):
                if prefix in fake_dict[str(idx)]:  # dodgy test needs this line
                    setattr(mru, prefix, fake_dict[str(idx)][prefix])
            span.entries.append(mru)
        if direct is not None:
            direct(span.entries)
        return nonce

    def __mru_query_error(self, e, restarted_count, cap_frags, limit, frags):
        if e.errorcode is None:
            raise e
        elif e.errorcode == ntp.control.CERR_UNKNOWNVAR:
            # None of the supplied prior entries match, so
            # toss them from our list and try again.
            self.warndbg("no overlap between prior entries and "
                         "server MRU list", 1)
            restarted_count += 1
            if restarted_count > 8:
                raise ControlException(SERR_STALL)
            self.warndbg("--->   Restarting from the beginning, "
                         "retry #%u" % restarted_count, 1)
        elif e.errorcode == ntp.control.CERR_BADVALUE:
            if cap_frags:
                cap_frags = False
                self.warndbg("Reverted to row limit from "
                             "fragments limit.", 1)
            else:
                # ntpd has lower cap on row limit
                self.ntpd_row_limit -= 1
                limit = min(limit, self.ntpd_row_limit)
                self.warndbg("Row limit reduced to %d following "
                             "CERR_BADVALUE." % limit, 1)
        elif e.errorcode in (SERR_INCOMPLETE, SERR_TIMEOUT):
            # Reduce the number of rows/frags requested by
            # half to recover from lost response fragments.
            if cap_frags:
                frags = max(2, frags / 2)
                self.warndbg("Frag limit reduced to %d following "
                             "incomplete response." % frags, 1)
            else:
                limit = max(2, limit / 2)
                self.warndbg("Row limit reduced to %d following "
                             " incomplete response." % limit, 1)
        elif e.errorcode:
            raise e
        return restarted_count, cap_frags, limit, frags

    def mrulist(self, variables=None, rawhook=None, direct=None):
        "Retrieve MRU list data"
        restarted_count = 0
        cap_frags = True
        sorter = None
        sortkey = None
        frags = MAXFRAGS
        if variables is None:
            variables = {}

        if variables:
            sorter, sortkey, frags = parse_mru_variables(variables)

        nonce = self.fetch_nonce()

        span = MRUList()
        try:
            # Form the initial request
            limit = min(3 * MAXFRAGS, self.ntpd_row_limit)
            req_buf = "%s, frags=%d" % (nonce, frags)
            if variables:
                if 'resall' in variables:
                    variables['resall'] = hex(variables['resall'])
                if 'resany' in variables:
                    variables['resany'] = hex(variables['resany'])
            parms, firstParms = generate_mru_parms(variables)
            req_buf += firstParms

            while True:
                # Request additions to the MRU list
                try:
                    self.doquery(opcode=ntp.control.CTL_OP_READ_MRU,
                                 qdata=req_buf)
                    recoverable_read_errors = False
                except ControlException as e:
                    recoverable_read_errors = True
                    res = self.__mru_query_error(e, restarted_count,
                                                 cap_frags, limit, frags)
                    restarted_count, cap_frags, limit, frags = res

                # Parse the response
                variables = self.__parse_varlist()

                # Comment from the C code:
                # This is a cheap cop-out implementation of rawmode
                # output for mrulist.  A better approach would be to
                # dump similar output after the list is collected by
                # ntpq with a continuous sequence of indexes.  This
                # cheap approach has indexes resetting to zero for
                # each query/response, and duplicates are not
                # coalesced.
                if rawhook:
                    rawhook(variables)

                # Analyze the contents of this response into a span structure
                newNonce = self.__mru_analyze(variables, span, direct)
                if newNonce:
                    nonce = newNonce

                # If we've seen the end sentinel on the span, break out
                if span.is_complete():
                    break

                # The C version of ntpq used to snooze for a bit
                # between MRU queries to let ntpd catch up with other
                # duties.  It turns out this is quite a bad idea.  Above
                # a certain traffic threshold, servers accumulate MRU records
                # faster than this protocol loop can capture them such that
                # you never get a complete span.  The last thing you want to
                # do when trying to keep up with a high-traffic server is stall
                # in the read loop.
                # time.sleep(0.05)

                # If there were no errors, increase the number of rows
                # to a maximum of 3 * MAXFRAGS (the most packets ntpq
                # can handle in one response), on the assumption that
                # no less than 3 rows fit in each packet, capped at
                # our best guess at the server's row limit.
                if not recoverable_read_errors:
                    if cap_frags:
                        frags = min(MAXFRAGS, frags + 1)
                    else:
                        limit = min(3 * MAXFRAGS,
                                    self.ntpd_row_limit,
                                    max(limit + 1,
                                        limit * 33 / 32))

                # Prepare next query with as many address and last-seen
                # timestamps as will fit in a single packet.  A new nonce
                # might be required.
                if time.time() - self.nonce_xmit >= ntp.control.NONCE_TIMEOUT:
                    nonce = self.fetch_nonce()
                req_buf = "%s, %s=%d%s" % \
                          (nonce,
                           "frags" if cap_frags else "limit",
                           frags if cap_frags else limit,
                           parms)
                req_buf += generate_mru_lastseen(span, len(req_buf))
                if direct is not None:
                    span.entries = []
        except KeyboardInterrupt:  # pragma: no cover
            pass        # We can test for interruption with is_complete()

        stitch_mru(span, sorter, sortkey)
        return span

    def __ordlist(self, listtype):
        "Retrieve ordered-list data."
        self.doquery(opcode=ntp.control.CTL_OP_READ_ORDLIST_A,
                     qdata=listtype, auth=True)
        stanzas = []
        for (key, value) in self.__parse_varlist().items():
            if key[-1].isdigit() and '.' in key:
                (stem, stanza) = key.split(".")
                stanza = int(stanza)
                if stanza > len(stanzas) - 1:
                    for i in range(len(stanzas), stanza + 1):
                        stanzas.append(ntp.util.OrderedDict())
                stanzas[stanza][stem] = value
        return stanzas

    def reslist(self):
        "Retrieve reslist data."
        return self.__ordlist("addr_restrictions")

    def ifstats(self):
        "Retrieve ifstats data."
        return self.__ordlist("ifstats")


def parse_mru_variables(variables):
    sorter = None
    sortkey = None
    frags = MAXFRAGS
    if "sort" in variables:
        sortkey = variables["sort"]
        del variables["sort"]
        # Slots are retrieved oldest first.
        # Slots are printed in reverse so the normal/no-sort
        #  case prints youngest first.
        # That means sort functions are backwards.
        # Note lstint is backwards again (aka normal/forward)
        #  since we really want to sort on now-last rather than last.
        sortdict = {
            # lstint ascending
            "lstint": lambda e: ntp.ntpc.lfptofloat(e.last),
            # lstint descending
            "-lstint": lambda e: -ntp.ntpc.lfptofloat(e.last),
            # avgint ascending
            "avgint": lambda e: -e.avgint(),
            # avgint descending
            "-avgint": lambda e: e.avgint(),
            # IPv4 asc. then IPv6 asc.
            "addr": lambda e: e.sortaddr(),
            # IPv6 desc. then IPv4 desc.
            "-addr": lambda e: e.sortaddr(),
            # hit count ascending
            "count": lambda e: -e.ct,
            # hit count descending
            "-count": lambda e: e.ct,
            # score ascending
            "score": lambda e: -e.sc,
            # score descending
            "-score": lambda e: e.sc,
            # drop count ascending
            "drop": lambda e: -e.dr,
            # drop count descending
            "-drop": lambda e: e.dr,
        }
        if sortkey == "lstint":
            sortkey = None   # normal/default case, no need to sort
        if sortkey is not None:
            sorter = sortdict.get(sortkey)
            if sorter is None:
                raise ControlException(SERR_BADSORT % sortkey)
    for k in list(variables.keys()):
        if k in ("mincount", "mindrop", "minscore",
                 "resall", "resany", "kod", "limited",
                 "maxlstint", "minlstint", "laddr", "recent",
                 "sort", "frags", "limit"):
            continue
        elif k.startswith('addr.') or k.startswith('last.'):
            kn = k.split('.')
            if len(kn) != 2 or kn[1] not in map(str, list(range(16))):
                raise ControlException(SERR_BADPARAM % k)
            continue
        else:
            raise ControlException(SERR_BADPARAM % k)
    if 'frags' in variables:
        frags = int(variables.get('frags'))
        del variables['frags']
    if 'kod' in variables:
        variables['resany'] = variables.get('resany', 0) \
                              | ntp.magic.RES_KOD
        del variables['kod']
    if 'limited' in variables:
        variables['resany'] = variables.get('resany', 0) \
                              | ntp.magic.RES_LIMITED
        del variables['limited']
    return sorter, sortkey, frags


def stitch_mru(span, sorter, sortkey):
    # C ntpq's code for stitching together spans was absurdly
    # overelaborate - all that dancing with last.older and
    # addr.older was, as far as I can tell, just pointless.
    # Much simpler to just run through the final list throwing
    # out every entry with an IP address that is duplicated
    # with a later most-recent-transmission time.
    addrdict = {}
    deletia = []
    for (i, entry) in enumerate(span.entries):
        if entry.addr not in addrdict:
            addrdict[entry.addr] = []
        addrdict[entry.addr].append((i, entry.last))
    for addr in addrdict:
        deletia += sorted(addrdict[addr], key=lambda x: x[1])[:-1]
    deletia = [x[0] for x in deletia]
    deletia.sort(reverse=True)  # Delete from top down so indices don't change
    for i in deletia:
        span.entries.pop(i)

    # Sort for presentation
    if sorter:
        span.entries.sort(key=sorter)
        if sortkey == "addr":
            # I don't know how to feed a minus sign to text sort
            span.entries.reverse()


def generate_mru_parms(variables):
    if not variables:
        return "", ""
    # generate all sans recent
    parmStrs = [("%s=%s" % it)
                for it in list(variables.items()) if (it[0] != "recent")]
    parms = ", " + ", ".join(parmStrs)
    # Only ship 'recent' on the first request
    if "recent" in variables:
        firstParms = ", recent=%s" % variables["recent"]
        firstParms += parms
    else:
        firstParms = parms
    return parms, firstParms


def generate_mru_lastseen(span, existingBufferSize):
    buf = ""
    for i in range(len(span.entries)):
        e = span.entries[len(span.entries) - i - 1]
        incr = ", addr.%d=%s, last.%d=%s" % (i, e.addr, i, e.last)
        if (existingBufferSize + len(buf) + len(incr) >=
                ntp.control.CTL_MAX_DATA_LEN):
            break
        else:
            buf += incr
    return buf


def mru_kv_key(token):
    bits = token[0].split('.')
    if len(bits) == 1:
        return -2
    try:
        return int(bits[1])
    except ValueError:
        return -1


class Authenticator:
    "MAC authentication manager for NTP packets."

    def __init__(self, keyfile=None):
        # We allow I/O and permission errors upward deliberately
        self.passwords = {}
        if keyfile is not None:
            for line in open(keyfile):
                if '#' in line:
                    line = line[:line.index("#")]
                line = line.strip()
                if not line:
                    continue
                (keyid, keytype, passwd) = line.split()
                if keytype.upper() in ['AES', 'AES128CMAC']:
                    keytype = 'AES-128'
                if len(passwd) > 20:
                    # if len(passwd) > 64:
                        # print('AUTH: Truncating key %s to 256bits (32Bytes)' % keyid)
                    passwd = ntp.util.hexstr2octets(passwd[:64])
                self.passwords[int(keyid)] = (keytype, passwd)

    def __len__(self):
        'return the number of keytype/passwd tuples stored'
        return len(self.passwords)

    def __getitem__(self, keyid):
        'get a keytype/passwd tuple by keyid'
        return self.passwords.get(keyid)

    def control(self, keyid=None):
        "Get the keytype/passwd tuple that controls localhost and its id"
        if keyid is not None:
            if keyid in self.passwords:
                return (keyid,) + self.passwords[keyid]
            else:
                return (keyid, None, None)
        for line in open("/etc/ntp.conf"):
            if line.startswith("control"):
                keyid = int(line.split()[1])
                (keytype, passwd) = self.passwords[keyid]
                if passwd is None:
                    # Invalid key ID
                    raise ValueError
                if len(passwd) > 20:
                    passwd = ntp.util.hexstr2octets(passwd)
                return (keyid, keytype, passwd)
        # No control lines found
        raise ValueError

    @staticmethod
    def compute_mac(payload, keyid, keytype, passwd):
        'Create the authentication payload to send'
        if not ntp.ntpc.checkname(keytype):
            return False
        mac2 = ntp.ntpc.mac(ntp.poly.polybytes(payload),
                            ntp.poly.polybytes(passwd), keytype)
        if not mac2 or len(mac2) == 0:
            return b''
        return struct.pack("!I", keyid) + mac2

    @staticmethod
    def have_mac(packet):
        "Does this packet have a MAC?"
        # According to RFC 5909 7.5 the MAC is always present when an extension
        # field is present. Note: this crude test will fail on Mode 6 packets.
        # On those you have to go in and look at the count.
        return len(packet) > ntp.magic.LEN_PKT_NOMAC

    def verify_mac(self, packet, packet_end=48, mac_begin=48):
        "Does the MAC on this packet verify according to credentials we have?"
        payload = packet[:packet_end]
        keyid = packet[mac_begin:mac_begin+KEYID_LENGTH]
        mac = packet[mac_begin+KEYID_LENGTH:]
        (keyid,) = struct.unpack("!I", keyid)
        if keyid not in self.passwords:
            # print('AUTH: No key %08x...' % keyid)
            return False
        (keytype, passwd) = self.passwords[keyid]
        if not ntp.ntpc.checkname(keytype):
            return False
        mac2 = ntp.ntpc.mac(ntp.poly.polybytes(payload),
                            ntp.poly.polybytes(passwd), keytype)
        if not mac2:
            return False
        # typically preferred to avoid timing attacks client-side (in theory)
        try:
            return hmac.compare_digest(mac, mac2) # supported 2.7.7+ and 3.3+
        except AttributeError:
            return mac == mac2  # solves issue #666

# end
