Wire Specification (GW)

Purpose:  To generate a string of segments to represent a straight wire.

Card:
           Cols  Parameter
          ----------------
           1- 2  GW
           3- 5  Iam-
f cards in a group that may be specified. In the NEC
    demonstration deck, the number of two-port networks (specified by NT
    cards and TL cards) is limited to thirty, and the number of different
    segments having network ports connected to them is limited to thirty.
One or more networks (including transmission lines) may be connected
    to any given segment.  Multiple network ports connected to one
    segment are connected in parallel.
If a transmission line is connected to a segment that has been
    impedance loaded (i.e., through the use of an LD card), the load
    acts in series with the line.
Use of transmission line cards (TL) after any form of execute requires
    the recalculation of the current only, and does not require recalculation
    of the matrix.
NT and TL cards do not affect symmetry.




./usr/share/doc/nec/NECdoc/cards/nx.html0000644000000000000000000000276311141370013016637 0ustar  rootroot
Next Structure (NX)


Next Structure (NX)
Purpose:To singla the end of data for one structure and the
beginning of data for the next.

Card:
 
     _________________________________________________________________
    /2|  5|   10|   15|   20|    30|    40|    50|    60|    70|    80|
   /  |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |NX |I1 | I2  | I3  | I4  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |
  |   |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |   |   |     |     |     |      |      |      |      |      |      |
  |  The numbers along the top refer to the last column in each field |
  |   |   |     |     |     |      |      |      |      |      |      |

PARAMETERS:
NX appears in the first two columns, and the rest of the card is blank

Notes: The card that directly follows the NX card must be a
comment card CM.


./usr/share/doc/nec/NECdoc/cards/gs.html0000644000000000000000000000212711141370013016615 0ustar  rootroot


Scale Structure Dimensions (GS)


Scale Structure Dimensions (GS)
Purpose:  To scale all dimensions of a structure by a constant.

Card:
           Cols  Parameter
          ----------------
           1- 2  GS
           3- 5  blank
           6-10  blank
          11-20  F1
          21-30  blank
          31-40  blank
          41-50  blank
          51-60  blank
          61-70  blank
          71-80  blank

Parameters:
        Integers