3. Template File

The AutoGen template file defines the content of the output text. It is composed of two parts. The first part consists of a pseudo macro invocation and commentary. It is followed by the template proper.

This pseudo macro is special. It is used to identify the file as a AutoGen template file, fixing the starting and ending marks for the macro invocations in the rest of the file, specifying the list of suffixes to be generated by the template and, optionally, the shell to use for processing shell commands embedded in the template.

AutoGen-ing a file consists of copying text from the template to the output file until a start macro marker is found. The text from the start marker to the end marker constitutes the macro text. AutoGen macros may cause sections of the template to be skipped or processed several times. The process continues until the end of the template is reached. The process is repeated once for each suffix specified in the pseudo macro.

This chapter describes the format of the AutoGen template macros and the usage of the AutoGen native macros. Users may augment these by defining their own macros, See section DEFINE - Define a user AutoGen macro.

3.1 Format of the Pseudo Macro

The pseudo macro is used to tell AutoGen how to process a template. It tells autogen:

1. The start macro marker. It consists of punctuation characters used to demarcate the start of a macro. It may be up to seven characters long and must be the first non-whitespace characters in the file.

   It is generally a good idea to use some sort of opening bracket in the starting macro and closing bracket in the ending macro (e.g. {, (, [, or even < in the starting macro). It helps both visually and with editors capable of finding a balancing parenthesis.

2. That start marker must be immediately followed by the identifier strings "AutoGen5" and then "template", though capitalization is not important.

The next several components may be intermingled:

1. Zero, one or more suffix specifications tell AutoGen how many times to process the template file. No suffix specifications mean that it is to be processed once and that the generated text is to be written to ‘stdout’. The current suffix for each pass can be determined with the (suffix) scheme function (see section ‘suffix’ - get the current suffix).

   The suffix specification consists of a sequence of POSIX compliant file name characters and, optionally, an equal sign and a file name formatting specification. That specification may be either an ordinary sequence of file name characters with zero, one or two "%s" formatting sequences in it, or else it may be a Scheme expression that, when evaluated, produces such a string. The Scheme result may not be empty. The two string arguments allowed for that string are the base name of the definition file, and the current suffix (that being the text to the left of the equal sign). (Note: "POSIX compliant file name characters" consist of alphanumerics plus the period (.), hyphen (-) and underscore (_) characters.)

   If the suffix begins with one of these three latter characters and a formatting string is not specified, then that character is presumed to be the suffix separator. Otherwise, without a specified format string, a single period will separate the suffix from the base name in constructing the output file name.

2. Comments: blank lines, lines starting with a hash mark [#]), and edit mode comments (text between pairs of -*- strings).
3. Some scheme expressions may be inserted in order to make configuration changes before template processing begins. “before template processing begins” means that there is no current output file, no current suffix and, basically, none of the AutoGen specific functions (see section AutoGen Scheme Functions) may be invoked.

   It is used, for example, to allow the template writer to specify the shell program that must be used to interpret the shell commands in the template. It can have no effect on any shell commands in the definitions file, as that file will have been processed by the time the pseudo macro is interpreted.

   (setenv "SHELL" "/bin/sh")

   This is extremely useful to ensure that the shell used is the one the template was written to use. By default, AutoGen determines the shell to use by user preferences. Sometimes, that can be the "csh", though.

   The scheme expression can also be used to save a pre-existing output file for later text extraction (see section ‘extract’ - extract text from another file).

   (shellf "mv -f %1$s.c %1$s.sav" (base-name))

After these must come the end macro marker:

1. The punctuation characters used to demarcate the end of a macro. Like the start marker, it must consist of seven or fewer punctuation characters.

The ending macro marker has a few constraints on its content. Some of them are just advisory, though. There is no special check for advisory restrictions.

• It must not begin with a POSIX file name character (hyphen -, underscore _ or period .), the backslash (\) or open parenthesis ((). These are used to identify a suffix specification, indicate Scheme code and trim white space.
• If it begins with an equal sign, then it must be separated from any suffix specification by white space.
• The closing marker may not begin with an open parenthesis, as that is used to enclose a scheme expression.
• It cannot begin with a backslash, as that is used to indicate white space trimming after the end macro mark. If, in the body of the template, you put the backslash character (\) before the end macro mark, then any white space characters after the mark and through the newline character are trimmed.
• It is also helpful to avoid using the comment marker (#). It might be seen as a comment within the pseudo macro.
• You should avoid using any of the quote characters double, single or back-quote. It won’t confuse AutoGen, but it might well confuse you and/or your editor.

As an example, assume we want to use [+ and +] as the start and end macro markers, and we wish to produce a ‘.c’ and a ‘.h’ file, then the pseudo macro might look something like this:

[+ AutoGen5 template -*- Mode: emacs-mode-of-choice -*-
h=chk-%s.h
c
# make sure we don't use csh:
(setenv "SHELL" "/bin/sh")  +]

The template proper starts after the pseudo-macro. The starting character is either the first non-whitespace character or the first character after the newline that follows the end macro marker.

3.2 Naming a value

When an AutoGen value is specified in a template, it is specified by name. The name may be a simple name, or a compound name of several components. Since each named value in AutoGen is implicitly an array of one or more values, each component may have an index associated with it.

It looks like this:

comp-name-1 . comp-name-2 [ 2 ]

Note that if there are multiple components to a name, each component name is separated by a dot (.). Indexes follow a component name, enclosed in square brackets ([ and ]). The index may be either an integer or an integer-valued define name. The first component of the name is searched for in the current definition level. If not found, higher levels will be searched until either a value is found, or there are no more definition levels. Subsequent components of the name must be found within the context of the newly-current definition level. Also, if the named value is prefixed by a dot (.), then the value search is started in the current context only. Backtracking into other definition levels is prevented.

If someone rewrites this, I’ll incorporate it. :-)

3.3 Macro Expression Syntax

AutoGen has two types of expressions: full expressions and basic ones. A full AutoGen expression can appear by itself, or as the argument to certain AutoGen built-in macros: CASE, IF, ELIF, INCLUDE, INVOKE (explicit invocation, see section INVOKE - Invoke a User Defined Macro), and WHILE. If it appears by itself, the result is inserted into the output. If it is an argument to one of these macros, the macro code will act on it sensibly.

You are constrained to basic expressions only when passing arguments to user defined macros, See section DEFINE - Define a user AutoGen macro.

The syntax of a full AutoGen expression is:

[[ <apply-code> ] <value-name> ] [ <basic-expr-1> [ <basic-expr-2> ]]

How the expression is evaluated depends upon the presence or absence of the apply code and value name. The "value name" is the name of an AutoGen defined value, or not. If it does not name such a value, the expression result is generally the empty string. All expressions must contain either a value-name or a basic-expr.

3.3.1 Apply Code

The "apply code" selected determines the method of evaluating the expression. There are five apply codes, including the non-use of an apply code.

‘no apply code’

This is the most common expression type. Expressions of this sort come in three flavors:

‘<value-name>’

The result is the value of value-name, if defined. Otherwise it is the empty string.

‘<basic-expr>’

The result of the basic expression is the result of the full expression, See section Basic Expression.

‘<value-name> <basic-expr>’

If there is a defined value for value-name, then the basic-expr is evaluated. Otherwise, the result is the empty string.

‘% <value-name> <basic-expr>’

If value-name is defined, use basic-expr as a format string for sprintf. Then, if the basic-expr is either a back-quoted string or a parenthesized expression, then hand the result to the appropriate interpreter for further evaluation. Otherwise, for single and double quote strings, the result is the result of the sprintf operation. Naturally, if value-name is not defined, the result is the empty string.

For example, assume that fumble had the string value, stumble:

[+ % fumble `printf '%%x\\n' $%s` +]

This would cause the shell to evaluate "printf '%x\n' $stumble". Assuming that the shell variable stumble had a numeric value, the expression result would be that number, in hex. Note the need for doubled percent characters and backslashes.

‘? <value-name> <basic-expr-1> <basic-expr-2>’

Two basic-expr-s are required. If the value-name is defined, then the first basic-expr-1 is evaluated, otherwise basic-expr-2 is.

‘- <value-name> <basic-expr>’

Evaluate basic-expr only if value-name is not defined.

‘?% <value-name> <basic-expr-1> <basic-expr-2>’

This combines the functions of ‘?’ and ‘%’. If value-name is defined, it behaves exactly like ‘%’, above, using basic-expr-1. If not defined, then basic-expr-2 is evaluated.

For example, assume again that fumble had the string value, stumble:

[+ ?% fumble `cat $%s` `pwd` +]

This would cause the shell to evaluate "cat $stumble". If fumble were not defined, then the result would be the name of our current directory.

3.3.2 Basic Expression

A basic expression can have one of the following forms:

‘'STRING'’

A single quoted string. Backslashes can be used to protect single quotes ('), hash characters (#), or backslashes (\) in the string. All other characters of STRING are output as-is when the single quoted string is evaluated. Backslashes are processed before the hash character for consistency with the definition syntax. It is needed there to avoid preprocessing conflicts.

‘"STRING"’

A double quoted string. This is a cooked text string as in C, except that they are not concatenated with adjacent strings. Evaluating "STRING" will output STRING with all backslash sequences interpreted.

‘`STRING`’

A back quoted string. When this expression is evaluated, STRING is first interpreted as a cooked string (as in ‘"STRING"’) and evaluated as a shell expression by the AutoGen server shell. This expression is replaced by the ‘stdout’ output of the shell.

‘(STRING)’

A parenthesized expression. It will be passed to the Guile interpreter for evaluation and replaced by the resulting value. If there is a Scheme error in this expression, Guile 1.4 and Guile 1.6 will report the template line number where the error occurs. Guile 1.7 has lost this capability.

Guile has the capability of creating and manipulating variables that can be referenced later on in the template processing. If you define such a variable, it is invisible to AutoGen. To reference its value, you must use a Guile expression. For example,

[+ (define my-var "some-string-value") +]

can have that string inserted later, but only as in:

[+ (. my-var) +]

Additionally, other than in the % and ?% expressions, the Guile expressions may be introduced with the Guile comment character (;) and you may put a series of Guile expressions within a single macro. They will be implicitly evaluated as if they were arguments to the (begin ...) expression. The result will be the result of the last Guile expression evaluated.

3.4 AutoGen Scheme Functions

AutoGen uses Guile to interpret Scheme expressions within AutoGen macros. All of the normal Guile functions are available, plus several extensions (see section Common Scheme Functions) have been added to augment the repertoire of string manipulation functions and manage the state of AutoGen processing.

This section describes those functions that are specific to AutoGen. Please take note that these AutoGen specific functions are not loaded and thus not made available until after the command line options have been processed and the AutoGen definitions have been loaded. They may, of course, be used in Scheme functions that get defined at those times, but they cannot be invoked.

3.4.1 ‘ag-function?’ - test for function

Usage: (ag-function? ag-name)
return SCM_BOOL_T if a specified name is a user-defined AutoGen macro, otherwise return SCM_BOOL_F.

Arguments:
ag-name - name of AutoGen macro

3.4.2 ‘base-name’ - base output name

Usage: (base-name)
Returns a string containing the base name of the output file(s). Generally, this is also the base name of the definitions file.

This Scheme function takes no arguments.

3.4.3 ‘chdir’ - Change current directory

Usage: (chdir dir)
Sets the current directory for AutoGen. Shell commands will run from this directory as well. This is a wrapper around the Guile native function. It returns its directory name argument and fails the program on failure.

Arguments:
dir - new directory name

3.4.4 ‘count’ - definition count

Usage: (count ag-name)
Count the number of entries for a definition. The input argument must be a string containing the name of the AutoGen values to be counted. If there is no value associated with the name, the result is an SCM immediate integer value of zero.

Arguments:
ag-name - name of AutoGen value

3.4.5 ‘def-file’ - definitions file name

Usage: (def-file)
Get the name of the definitions file. Returns the name of the source file containing the AutoGen definitions.

This Scheme function takes no arguments.

3.4.6 ‘def-file-line’ - get a definition file+line number

Usage: (def-file-line ag-name [ msg-fmt ])
Returns the file and line number of a AutoGen defined value, using either the default format, "from %s line %d", or else the format you supply. For example, if you want to insert a "C" language file-line directive, you would supply the format "# %2$d \"%1$s\"", but that is also already supplied with the scheme variable See section format file info as, “#line nn "file"”. You may use it thus:

(def-file-line "ag-def-name" c-file-line-fmt)

It is also safe to use the formatting string, "%2$d". AutoGen uses an argument vector version of printf: See section Replacement for Stdio Formatting Library.

Arguments:
ag-name - name of AutoGen value
msg-fmt - Optional - formatting for line message

3.4.7 ‘dne’ - "Do Not Edit" warning

Usage: (dne prefix [ first_prefix ] [ optpfx ])
Generate a "DO NOT EDIT" or "EDIT WITH CARE" warning string. Which depends on whether or not the --writable command line option was set.

The first argument may be an option: -d This will suppress the variable text (date and version information). If specified, then the "prefix" and "first" arguments are shifted to the next arguments.

The first argument is a per-line string prefix. The optional second argument is a prefix for the first-line and, in read-only mode, activates the editor hints.

-*- buffer-read-only: t -*- vi: set ro:

The warning string also includes information about the template used to construct the file and the definitions used in its instantiation.

The optional third argument is used when the first argument is actually an invocation option and the prefix arguments get shifted. The first argument must be, specifically, "-d". That is used to signify that the date stamp should not be inserted into the output.

Arguments:
prefix - string for starting each output line
first_prefix - Optional - for the first output line
optpfx - Optional - shifted prefix

3.4.8 ‘error’ - display message and exit

Usage: (error message)
The argument is a string that printed out as part of an error message. The message is formed from the formatting string:

DEFINITIONS ERROR in %s line %d for %s:  %s\n

The first three arguments to this format are provided by the routine and are: The name of the template file, the line within the template where the error was found, and the current output file name.

After displaying the message, the current output file is removed and autogen exits with the EXIT_FAILURE error code. IF, however, the argument begins with the number 0 (zero), or the string is the empty string, then processing continues with the next suffix.

Arguments:
message - message to display before exiting

3.4.9 ‘exist?’ - test for value name

Usage: (exist? ag-name)
return SCM_BOOL_T iff a specified name has an AutoGen value. The name may include indexes and/or member names. All but the last member name must be an aggregate definition. For example:

(exist? "foo[3].bar.baz")

will yield true if all of the following is true:
There is a member value of either group or string type named baz for some group value bar that is a member of the foo group with index 3. There may be multiple entries of bar within foo, only one needs to contain a value for baz.

Arguments:
ag-name - name of AutoGen value

3.4.10 ‘find-file’ - locate a file in the search path

Usage: (find-file file-name [ suffix ])
AutoGen has a search path that it uses to locate template and definition files. This function will search the same list for ‘file-name’, both with and without the ‘.suffix’, if provided.

Arguments:
file-name - name of file with text
suffix - Optional - file suffix to try, too

3.4.11 ‘first-for?’ - detect first iteration

Usage: (first-for? [ for_var ])
Returns SCM_BOOL_T if the named FOR loop (or, if not named, the current innermost loop) is on the first pass through the data. Outside of any FOR loop, it returns SCM_UNDEFINED. See section FOR - Emit a template block multiple times.

Arguments:
for_var - Optional - which for loop

3.4.12 ‘for-by’ - set iteration step

Usage: (for-by by)
This function records the "step by" information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. See section FOR - Emit a template block multiple times.

Arguments:
by - the iteration increment for the AutoGen FOR macro

3.4.13 ‘for-from’ - set initial index

Usage: (for-from from)
This function records the initial index information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. See section FOR - Emit a template block multiple times.

Arguments:
from - the initial index for the AutoGen FOR macro

3.4.14 ‘for-index’ - get current loop index

Usage: (for-index [ for_var ])
Returns the current index for the named FOR loop. If not named, then the index for the innermost loop. Outside of any FOR loop, it returns SCM_UNDEFINED. See section FOR - Emit a template block multiple times.

Arguments:
for_var - Optional - which for loop

3.4.15 ‘for-sep’ - set loop separation string

Usage: (for-sep separator)
This function records the separation string that is to be inserted between each iteration of an AutoGen FOR function. This is often nothing more than a comma. Outside of the FOR macro itself, this function will emit an error.

Arguments:
separator - the text to insert between the output of each FOR iteration

3.4.16 ‘for-to’ - set ending index

Usage: (for-to to)
This function records the terminating value information for an AutoGen FOR function. Outside of the FOR macro itself, this function will emit an error. See section FOR - Emit a template block multiple times.

Arguments:
to - the final index for the AutoGen FOR macro

3.4.17 ‘get’ - get named value

Usage: (get ag-name [ alt-val ])
Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string.

Arguments:
ag-name - name of AutoGen value
alt-val - Optional - value if not present

3.4.18 ‘get-c-name’ - get named value, mapped to C name syntax

Usage: (get-c-name ag-name)
Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. The result is passed through "string->c-name!".

Arguments:
ag-name - name of AutoGen value

3.4.19 ‘get-down-name’ - get lower cased named value, mapped to C name syntax

Usage: (get-down-name ag-name)
Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. The result is passed through "string->c-name!" and "string->down-case!".

Arguments:
ag-name - name of AutoGen value

3.4.20 ‘get-up-name’ - get upper cased named value, mapped to C name syntax

Usage: (get-up-name ag-name)
Get the first string value associated with the name. It will either return the associated string value (if the name resolves), the alternate value (if one is provided), or else the empty string. The result is passed through "string->c-name!" and "string->up-case!".

Arguments:
ag-name - name of AutoGen value

3.4.21 ‘high-lim’ - get highest value index

Usage: (high-lim ag-name)
Returns the highest index associated with an array of definitions. This is generally, but not necessarily, one less than the count value. (The indexes may be specified, rendering a non-zero based or sparse array of values.)

This is very useful for specifying the size of a zero-based array of values where not all values are present. For example:

tMyStruct myVals[ [+ (+ 1 (high-lim "my-val-list")) +] ];

Arguments:
ag-name - name of AutoGen value

3.4.22 ‘last-for?’ - detect last iteration

Usage: (last-for? [ for_var ])
Returns SCM_BOOL_T if the named FOR loop (or, if not named, the current innermost loop) is on the last pass through the data. Outside of any FOR loop, it returns SCM_UNDEFINED. See section FOR - Emit a template block multiple times.

Arguments:
for_var - Optional - which for loop

3.4.23 ‘len’ - get count of values

Usage: (len ag-name)
If the named object is a group definition, then "len" is the same as "count". Otherwise, if it is one or more text definitions, then it is the sum of their string lengths. If it is a single text definition, then it is equivalent to (string-length (get "ag-name")).

Arguments:
ag-name - name of AutoGen value

3.4.24 ‘low-lim’ - get lowest value index

Usage: (low-lim ag-name)
Returns the lowest index associated with an array of definitions.

Arguments:
ag-name - name of AutoGen value

3.4.25 ‘make-header-guard’ - make self-inclusion guard

Usage: (make-header-guard name)
This function will create a #ifndef/#define sequence for protecting a header from multiple evaluation. It will also set the Scheme variable header-file to the name of the file being protected and it will set header-guard to the name of the #define being used to protect it. It is expected that this will be used as follows:

[+ (make-header-guard "group_name") +]
...
#endif /* [+ (. header-guard) +] */

#include "[+ (. header-file)  +]"

The #define name is composed as follows:

1. The first element is the string argument and a separating underscore.
2. That is followed by the name of the header file with illegal characters mapped to underscores.
3. The end of the name is always, "_GUARD".
4. Finally, the entire string is mapped to upper case.

The final #define name is stored in an SCM symbol named header-guard. Consequently, the concluding #endif for the file should read something like:

#endif /* [+ (. header-guard) +] */

The name of the header file (the current output file) is also stored in an SCM symbol, header-file. Therefore, if you are also generating a C file that uses the previously generated header file, you can put this into that generated file:

#include "[+ (. header-file) +]"

Obviously, if you are going to produce more than one header file from a particular template, you will need to be careful how these SCM symbols get handled.

Arguments:
name - header group name

3.4.26 ‘match-value?’ - test for matching value

Usage: (match-value? op ag-name test-str)
This function answers the question, "Is there an AutoGen value named ag-name with a value that matches the pattern test-str using the match function op?" Return SCM_BOOL_T iff at least one occurrence of the specified name has such a value. The operator can be any function that takes two string arguments and yields a boolean. It is expected that you will use one of the string matching functions provided by AutoGen.
The value name must follow the same rules as the ag-name argument for exist? (see section ‘exist?’ - test for value name).

Arguments:
op - boolean result operator
ag-name - name of AutoGen value
test-str - string to test against

3.4.27 ‘out-delete’ - delete current output file

Usage: (out-delete)
Remove the current output file. Cease processing the template for the current suffix. It is an error if there are push-ed output files. Use the (error "0") scheme function instead. See section Redirecting Output.

This Scheme function takes no arguments.

3.4.28 ‘out-depth’ - output file stack depth

Usage: (out-depth)
Returns the depth of the output file stack. See section Redirecting Output.

This Scheme function takes no arguments.

3.4.29 ‘out-emit-suspended’ - emit the text of suspended output

Usage: (out-emit-suspended suspName)
This function is equivalent to (begin (out-resume <name>) (out-pop #t))

Arguments:
suspName - A name tag of suspended output

3.4.30 ‘out-line’ - output file line number

Usage: (out-line)
Returns the current line number of the output file. It rewinds and reads the file to count newlines.

This Scheme function takes no arguments.

3.4.31 ‘out-move’ - change name of output file

Usage: (out-move new-name)
Rename current output file. See section Redirecting Output. Please note: changing the name will not save a temporary file from being deleted. It may, however, be used on the root output file.

Arguments:
new-name - new name for the current output file

3.4.32 ‘out-name’ - current output file name

Usage: (out-name)
Returns the name of the current output file. If the current file is a temporary, unnamed file, then it will scan up the chain until a real output file name is found. See section Redirecting Output.

This Scheme function takes no arguments.

3.4.33 ‘out-pop’ - close current output file

Usage: (out-pop [ disp ])
If there has been a push on the output, then close that file and go back to the previously open file. It is an error if there has not been a push. See section Redirecting Output.

If there is no argument, no further action is taken. Otherwise, the argument should be #t and the contents of the file are returned by the function.

Arguments:
disp - Optional - return contents of the file

3.4.34 ‘out-push-add’ - append output to file

Usage: (out-push-add file-name)
Identical to push-new, except the contents are not purged, but appended to. See section Redirecting Output.

Arguments:
file-name - name of the file to append text to

3.4.35 ‘out-push-new’ - purge and create output file

Usage: (out-push-new [ file-name ])
Leave the current output file open, but purge and create a new file that will remain open until a pop delete or switch closes it. The file name is optional and, if omitted, the output will be sent to a temporary file that will be deleted when it is closed. See section Redirecting Output.

Arguments:
file-name - Optional - name of the file to create

3.4.36 ‘out-resume’ - resume suspended output file

Usage: (out-resume suspName)
If there has been a suspended output, then make that output descriptor current again. That output must have been suspended with the same tag name given to this routine as its argument.

Arguments:
suspName - A name tag for reactivating

3.4.37 ‘out-suspend’ - suspend current output file

Usage: (out-suspend suspName)
If there has been a push on the output, then set aside the output descriptor for later reactiviation with (out-resume "xxx"). The tag name need not reflect the name of the output file. In fact, the output file may be an anonymous temporary file. You may also change the tag every time you suspend output to a file, because the tag names are forgotten as soon as the file has been "resumed".

Arguments:
suspName - A name tag for reactivating

3.4.38 ‘out-switch’ - close and create new output

Usage: (out-switch file-name)
Switch output files - close current file and make the current file pointer refer to the new file. This is equivalent to out-pop followed by out-push-new, except that you may not pop the base level output file, but you may switch it. See section Redirecting Output.

Arguments:
file-name - name of the file to create

3.4.39 ‘set-option’ - Set a command line option

Usage: (set-option opt)
The text argument must be an option name followed by any needed option argument. Returns SCM_UNDEFINED.

Arguments:
opt - AutoGen option name + its argument

3.4.40 ‘set-writable’ - Make the output file be writable

Usage: (set-writable [ set? ])
This function will set the current output file to be writable (or not). This is only effective if neither the --writable nor --not-writable have been specified. This state is reset when the current suffix’s output is complete.

Arguments:
set? - Optional - boolean arg, false to make output non-writable

3.4.41 ‘stack’ - make list of AutoGen values

Usage: (stack ag-name)
Create a scheme list of all the strings that are associated with a name. They must all be text values or we choke.

Arguments:
ag-name - AutoGen value name

3.4.42 ‘suffix’ - get the current suffix

Usage: (suffix)
Returns the current active suffix (see section Format of the Pseudo Macro).

This Scheme function takes no arguments.

3.4.43 ‘tpl-file’ - get the template file name

Usage: (tpl-file [ full_path ])
Returns the name of the current template file. If #t is passed in as an argument, then the template file is hunted for in the template search path. Otherwise, just the unadorned name.

Arguments:
full_path - Optional - include full path to file

3.4.44 ‘tpl-file-line’ - get the template file+line number

Usage: (tpl-file-line [ msg-fmt ])
Returns the file and line number of the current template macro using either the default format, "from %s line %d", or else the format you supply. For example, if you want to insert a "C" language file-line directive, you would supply the format "# %2$d \"%1$s\"", but that is also already supplied with the scheme variable See section format file info as, “#line nn "file"”. You may use it thus:

(tpl-file-line c-file-line-fmt)

It is also safe to use the formatting string, "%2$d". AutoGen uses an argument vector version of printf: See section Replacement for Stdio Formatting Library.

Arguments:
msg-fmt - Optional - formatting for line message

3.4.45 ‘autogen-version’ - autogen version number

This is a symbol defining the current AutoGen version number string. It was first defined in AutoGen-5.2.14. It is currently “5.10”.

3.4.46 format file info as, “#line nn "file"”

This is a symbol that can easily be used with the functions See section ‘tpl-file-line’ - get the template file+line number, and See section ‘def-file-line’ - get a definition file+line number. These will emit C program #line directives pointing to template and definitions text, respectively.

3.5 Common Scheme Functions

This section describes a number of general purpose functions that make the kind of string processing that AutoGen does a little easier. Unlike the AutoGen specific functions (see section AutoGen Scheme Functions), these functions are available for direct use during definition load time. The equality test (see section ‘string-eqv?’ - caseless string match) is “overloaded” to do string equivalence comparisons. If you are looking for inequality, the Scheme/Lisp way of spelling that is, “(not (= ...))”.

3.5.1 ‘ag-fprintf’ - format to autogen stream

Usage: (ag-fprintf ag-diversion format [ format-arg ... ])
Format a string using arguments from the alist. Write to a specified AutoGen diversion. That may be either a specified suspended output stream (see section ‘out-suspend’ - suspend current output file) or an index into the output stack (see section ‘out-push-new’ - purge and create output file). (ag-fprintf 0 ...) is equivalent to (emit (sprintf ...)), and (ag-fprintf 1 ...) sends output to the most recently suspended output stream.

Arguments:
ag-diversion - AutoGen diversion name or number
format - formatting string
format-arg - Optional - list of arguments to formatting string

3.5.2 ‘agpl’ - GNU Affero General Public License

Usage: (agpl prog-name prefix)
Emit a string that contains the GNU Affero General Public License. It takes two arguments: prefix contains the string to start each output line, and prog_name contains the name of the program the copyright is about.

Arguments:
prog-name - name of the program under the GPL
prefix - String for starting each output line

3.5.3 ‘bsd’ - BSD Public License

Usage: (bsd prog_name owner prefix)
Emit a string that contains the Free BSD Public License. It takes three arguments: prefix contains the string to start each output line. owner contains the copyright owner. prog_name contains the name of the program the copyright is about.

Arguments:
prog_name - name of the program under the BSD
owner - Grantor of the BSD License
prefix - String for starting each output line

3.5.4 ‘c-string’ - emit string for ANSI C

Usage: (c-string string)
Reform a string so that, when printed, the C compiler will be able to compile the data and construct a string that contains exactly what the current string contains. Many non-printing characters are replaced with escape sequences. Newlines are replaced with a backslash, an n, a closing quote, a newline, seven spaces and another re-opening quote. The compiler will implicitly concatenate them. The reader will see line breaks.

A K&R compiler will choke. Use kr-string for that compiler.

Arguments:
string - string to reformat

3.5.5 ‘emit’ - emit the text for each argument

Usage: (emit alist ...)
Walk the tree of arguments, displaying the values of displayable SCM types.

Arguments:
alist - list of arguments to stringify and emit

3.5.6 ‘emit-string-table’ - output a string table

Usage: (emit-string-table st-name)
Emit into the current output stream a static char const array named st-name that will have NUL bytes between each inserted string.

Arguments:
st-name - the name of the array of characters

3.5.7 ‘error-source-line’ - display of file & line

Usage: (error-source-line)
This function is only invoked just before Guile displays an error message. It displays the file name and line number that triggered the evaluation error. You should not need to invoke this routine directly. Guile will do it automatically.

This Scheme function takes no arguments.

3.5.8 ‘extract’ - extract text from another file

Usage: (extract file-name marker-fmt [ caveat ] [ default ])
This function is used to help construct output files that may contain text that is carried from one version of the output to the next.

The first two arguments are required, the second are optional:

• The file-name argument is used to name the file that contains the demarcated text.
• The marker-fmt is a formatting string that is used to construct the starting and ending demarcation strings. The sprintf function is given the marker-fmt with two arguments. The first is either "START" or "END". The second is either "DO NOT CHANGE THIS COMMENT" or the optional caveat argument.
• caveat is presumed to be absent if it is the empty string (""). If absent, “DO NOT CHANGE THIS COMMENT” is used as the second string argument to the marker-fmt.
• When a default argument is supplied and no pre-existing text is found, then this text will be inserted between the START and END markers.

The resulting strings are presumed to be unique within the subject file. As a simplified example:

[+ (extract "fname" "// %s - SOMETHING - %s" ""
"example default") +]

will result in the following text being inserted into the output:

// START - SOMETHING - DO NOT CHANGE THIS COMMENT
example default
// END   - SOMETHING - DO NOT CHANGE THIS COMMENT

The “example default” string can then be carried forward to the next generation of the output, provided the output is not named "fname" and the old output is renamed to "fname" before AutoGen-eration begins.

NB:

You can set aside previously generated source files inside the pseudo macro with a Guile/scheme function, extract the text you want to keep with this extract function. Just remember you should delete it at the end, too. Here is an example from my Finite State Machine generator:

[+ AutoGen5 Template -*- Mode: text -*- h=%s-fsm.h c=%s-fsm.c (shellf "test -f %1$s-fsm.h && mv -f %1$s-fsm.h .fsm.head test -f %1$s-fsm.c && mv -f %1$s-fsm.c .fsm.code" (base-name)) +]

This code will move the two previously produced output files to files named ".fsm.head" and ".fsm.code". At the end of the ’c’ output processing, I delete them.

also NB:

This function presumes that the output file ought to be editable so that the code between the START and END marks can be edited by the template user. Consequently, when the (extract ...) function is invoked, if the writable option has not been specified, then it will be set at that point. If this is not the desired behavior, the --not-writable command line option will override this. Also, you may use the guile function (chmod "file" mode-value) to override whatever AutoGen is using for the result mode.

Arguments:
file-name - name of file with text
marker-fmt - format for marker text
caveat - Optional - warn about changing marker
default - Optional - default initial text

3.5.9 ‘format-arg-count’ - count the args to a format

Usage: (format-arg-count format)
Sometimes, it is useful to simply be able to figure out how many arguments are required by a format string. For example, if you are extracting a format string for the purpose of generating a macro to invoke a printf-like function, you can run the formatting string through this function to determine how many arguments to provide for in the macro. e.g. for this extraction text:

 /*=fumble bumble
  * fmt: 'stumble %s: %d\n'
 =*/

You may wish to generate a macro:

 #define BUMBLE(a1,a2) printf_like(something,(a1),(a2))

You can do this by knowing that the format needs two arguments.

Arguments:
format - formatting string

3.5.10 ‘fprintf’ - format to a file

Usage: (fprintf port format [ format-arg ... ])
Format a string using arguments from the alist. Write to a specified port. The result will NOT appear in your output. Use this to print information messages to a template user.

Arguments:
port - Guile-scheme output port
format - formatting string
format-arg - Optional - list of arguments to formatting string

3.5.11 ‘gperf’ - perform a perfect hash function

Usage: (gperf name str)
Perform the perfect hash on the input string. This is only useful if you have previously created a gperf program with the make-gperf function See section ‘make-gperf’ - build a perfect hash function program. The name you supply here must match the name used to create the program and the string to hash must be one of the strings supplied in the make-gperf string list. The result will be a perfect hash index.

See the documentation for gperf(1GNU) for more details.

Arguments:
name - name of hash list
str - string to hash

3.5.12 ‘gperf-code’ - emit the source of the generated gperf program

Usage: (gperf-code st-name)
Returns the contents of the emitted code, suitable for inclusion in another program. The interface contains the following elements:

‘struct <st-name>_index’

containg the fields: {char const * name, int const id; };

‘<st-name>_hash()’

This is the hashing function with local only scope (static).

‘<st-name>_find()’

This is the searching and validation function. The first argument is the string to look up, the second is its length. It returns a pointer to the corresponding <st-name>_index entry.

Use this in your template as follows where "<st-name>" was set to be "lookup":

[+ (make-gperf "lookup" (join "\n" (stack "name_list")))
(gperf-code "lookup") +]
void my_fun(char * str) {
struct lookup_index * li = lookup_find(str, strlen(str));
if (li != NULL) printf("%s yields %d\n", str, li->idx);

Arguments:
st-name - the name of the gperf hash list

3.5.13 ‘gpl’ - GNU General Public License

Usage: (gpl prog-name prefix)
Emit a string that contains the GNU General Public License. It takes two arguments: prefix contains the string to start each output line, and prog_name contains the name of the program the copyright is about.

Arguments:
prog-name - name of the program under the GPL
prefix - String for starting each output line

3.5.14 ‘hide-email’ - convert eaddr to javascript

Usage: (hide-email display eaddr)
Hides an email address as a java scriptlett. The ’mailto:’ tag and the email address are coded bytes rather than plain text. They are also broken up.

Arguments:
display - display text
eaddr - email address

3.5.15 ‘html-escape-encode’ - encode html special characters

Usage: (html-escape-encode str)
This function will replace replace the characters '&', '<' and '>' characters with the HTML/XML escape-encoded strings ("&", "<", and ">", respectively).

Arguments:
str - string to make substitutions in

3.5.16 ‘in?’ - test for string in list

Usage: (in? test-string string-list ...)
Return SCM_BOOL_T if the first argument string is found in one of the entries in the second (list-of-strings) argument.

Arguments:
test-string - string to look for
string-list - list of strings to check

3.5.17 ‘join’ - join string list with separator

Usage: (join separator list ...)
With the first argument as the separator string, joins together an a-list of strings into one long string. The list may contain nested lists, partly because you cannot always control that.

Arguments:
separator - string to insert between entries
list - list of strings to join

3.5.18 ‘kr-string’ - emit string for K&R C

Usage: (kr-string string)
Reform a string so that, when printed, a K&R C compiler will be able to compile the data and construct a string that contains exactly what the current string contains. Many non-printing characters are replaced with escape sequences. New-lines are replaced with a backslash-n-backslash and newline sequence,

Arguments:
string - string to reformat

3.5.19 ‘lgpl’ - GNU Library General Public License

Usage: (lgpl prog_name owner prefix)
Emit a string that contains the GNU Library General Public License. It takes three arguments: prefix contains the string to start each output line. owner contains the copyright owner. prog_name contains the name of the program the copyright is about.

Arguments:
prog_name - name of the program under the LGPL
owner - Grantor of the LGPL
prefix - String for starting each output line

3.5.20 ‘license’ - an arbitrary license

Usage: (license lic_name prog_name owner prefix)
Emit a string that contains the named license. The license text is read from a file named, lic_name.lic, searching the standard directories. The file contents are used as a format argument to printf(3), with prog_name and owner as the two string formatting arguments. Each output line is automatically prefixed with the string prefix.

Arguments:
lic_name - file name of the license
prog_name - name of the licensed program or library
owner - Grantor of the License
prefix - String for starting each output line

3.5.21 ‘make-gperf’ - build a perfect hash function program

Usage: (make-gperf name strings ...)
Build a program to perform perfect hashes of a known list of input strings. This function produces no output, but prepares a program named, ‘gperf_<name>’ for use by the gperf function See section ‘gperf’ - perform a perfect hash function.

This program will be obliterated as AutoGen exits. However, you may incorporate the generated hashing function into your C program with commands something like the following:

[+ (shellf "sed '/^int main(/,$d;/^#line/d' ${gpdir}/%s.c"
name ) +]

where name matches the name provided to this make-perf function. gpdir is the variable used to store the name of the temporary directory used to stash all the files.

Arguments:
name - name of hash list
strings - list of strings to hash

3.5.22 ‘makefile-script’ - create makefile script

Usage: (makefile-script text)
This function will take ordinary shell script text and reformat it so that it will work properly inside of a makefile shell script. Not every shell construct can be supported; the intent is to have most ordinary scripts work without much, if any, alteration.

The following transformations are performed on the source text:

1. Trailing whitespace on each line is stripped.
2. Except for the last line, the string, " ; \\" is appended to the end of every line that does not end with a backslash, semi-colon, conjunction operator or pipe. Note that this will mutilate multi-line quoted strings, but make renders it impossible to use multi-line constructs anyway.
3. If the line ends with a backslash, it is left alone.
4. If the line ends with one of the excepted operators, then a space and backslash is added.
5. The dollar sign character is doubled, unless it immediately precedes an opening parenthesis or the single character make macros ’*’, ’<’, ’@’, ’?’ or ’%’. Other single character make macros that do not have enclosing parentheses will fail. For shell usage of the "$@", "$?" and "$*" macros, you must enclose them with curly braces, e.g., "${?}". The ksh construct $(<command>) will not work. Though some makes accept ${var} constructs, this function will assume it is for shell interpretation and double the dollar character. You must use $(var) for all make substitutions.
6. Double dollar signs are replaced by four before the next character is examined.
7. Every line is prefixed with a tab, unless the first line already starts with a tab.
8. The newline character on the last line, if present, is suppressed.
9. Blank lines are stripped.

This function is intended to be used approximately as follows:

$(TARGET) : $(DEPENDENCIES)
<+ (out-push-new) +>
....mostly arbitrary shell script text....
<+ (makefile-script (out-pop #t)) +>

Arguments:
text - the text of the script

3.5.23 ‘max’ - maximum value in list

Usage: (max list ...)
Return the maximum value in the list

Arguments:
list - list of values. Strings are converted to numbers

3.5.24 ‘min’ - minimum value in list

Usage: (min list ...)
Return the minimum value in the list

Arguments:
list - list of values. Strings are converted to numbers

3.5.25 ‘prefix’ - prefix lines with a string

Usage: (prefix prefix text)
Prefix every line in the second string with the first string.

For example, if the first string is "# " and the second contains:

two
lines

The result string will contain:

# two
# lines

Arguments:
prefix - string to insert at start of each line
text - multi-line block of text

3.5.26 ‘printf’ - format to stdout

Usage: (printf format [ format-arg ... ])
Format a string using arguments from the alist. Write to the standard out port. The result will NOT appear in your output. Use this to print information messages to a template user. Use “(sprintf ...)” to add text to your document.

Arguments:
format - formatting string
format-arg - Optional - list of arguments to formatting string

3.5.27 ‘raw-shell-str’ - single quote shell string

Usage: (raw-shell-str string)
Convert the text of the string into a singly quoted string that a normal shell will process into the original string. (It will not do macro expansion later, either.) Contained single quotes become tripled, with the middle quote escaped with a backslash. Normal shells will reconstitute the original string.

Notice: some shells will not correctly handle unusual non-printing characters. This routine works for most reasonably conventional ASCII strings.

Arguments:
string - string to transform

3.5.28 ‘shell’ - invoke a shell script

Usage: (shell command)
Generate a string by writing the value to a server shell and reading the output back in. The template programmer is responsible for ensuring that it completes within 10 seconds. If it does not, the server will be killed, the output tossed and a new server started.

Arguments:
command - shell command - the result value is stdout

3.5.29 ‘shell-str’ - double quote shell string

Usage: (shell-str string)
Convert the text of the string into a double quoted string that a normal shell will process into the original string, almost. It will add the escape character \\ before two special characters to accomplish this: the backslash \\ and double quote ".

NOTE: some shells will not correctly handle unusual non-printing characters. This routine works for most reasonably conventional ASCII strings.

WARNING:
This function omits the extra backslash in front of a backslash, however, if it is followed by either a backquote or a dollar sign. It must do this because otherwise it would be impossible to protect the dollar sign or backquote from shell evaluation. Consequently, it is not possible to render the strings "\\$" or "\\‘". The lesser of two evils.

All others characters are copied directly into the output.

The sub-shell-str variation of this routine behaves identically, except that the extra backslash is omitted in front of " instead of `. You have to think about it. I’m open to suggestions.

Meanwhile, the best way to document is with a detailed output example. If the backslashes make it through the text processing correctly, below you will see what happens with three example strings. The first example string contains a list of quoted foos, the second is the same with a single backslash before the quote characters and the last is with two backslash escapes. Below each is the result of the raw-shell-str, shell-str and sub-shell-str functions.

foo[0]           ''foo'' 'foo' "foo" `foo` $foo
raw-shell-str -> \'\''foo'\'\'' '\''foo'\'' "foo" `foo` $foo'
shell-str     -> "''foo'' 'foo' \"foo\" `foo` $foo"
sub-shell-str -> `''foo'' 'foo' "foo" \`foo\` $foo`

foo[1]           \'bar\' \"bar\" \`bar\` \$bar
raw-shell-str -> '\'\''bar\'\'' \"bar\" \`bar\` \$bar'
shell-str     -> "\\'bar\\' \\\"bar\\\" \`bar\` \$bar"
sub-shell-str -> `\\'bar\\' \"bar\" \\\`bar\\\` \$bar`

foo[2]           \\'BAZ\\' \\"BAZ\\" \\`BAZ\\` \\$BAZ
raw-shell-str -> '\\'\''BAZ\\'\'' \\"BAZ\\" \\`BAZ\\` \\$BAZ'
shell-str     -> "\\\\'BAZ\\\\' \\\\\"BAZ\\\\\" \\\`BAZ\\\` \\\$BAZ"
sub-shell-str -> `\\\\'BAZ\\\\' \\\"BAZ\\\" \\\\\`BAZ\\\\\` \\\$BAZ`

There should be four, three, five and three backslashes for the four examples on the last line, respectively. The next to last line should have four, five, three and three backslashes. If this was not accurately reproduced, take a look at the agen5/test/shell.test test. Notice the backslashes in front of the dollar signs. It goes from zero to one to three for the "cooked" string examples.

Arguments:
string - string to transform

3.5.30 ‘shellf’ - format a string, run shell

Usage: (shellf format [ format-arg ... ])
Format a string using arguments from the alist, then send the result to the shell for interpretation.

Arguments:
format - formatting string
format-arg - Optional - list of arguments to formatting string

3.5.31 ‘sprintf’ - format a string

Usage: (sprintf format [ format-arg ... ])
Format a string using arguments from the alist.

Arguments:
format - formatting string
format-arg - Optional - list of arguments to formatting string

3.5.32 ‘string-capitalize’ - capitalize a new string

Usage: (string-capitalize str)
Create a new SCM string containing the same text as the original, only all the first letter of each word is upper cased and all other letters are made lower case.

Arguments:
str - input string

3.5.33 ‘string-capitalize!’ - capitalize a string

Usage: (string-capitalize! str)
capitalize all the words in an SCM string.

Arguments:
str - input/output string

3.5.34 ‘string-contains-eqv?’ - caseless substring

Usage: (*=* text match)
string-contains-eqv?: Test to see if a string contains an equivalent string. ‘equivalent’ means the strings match, but without regard to character case and certain characters are considered ‘equivalent’. Viz., ’-’, ’_’ and ’^’ are equivalent.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.35 ‘string-contains?’ - substring match

Usage: (*==* text match)
string-contains?: Test to see if a string contains a substring. "strstr(3)" will find an address.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.36 ‘string-downcase’ - lower case a new string

Usage: (string-downcase str)
Create a new SCM string containing the same text as the original, only all the upper case letters are changed to lower case.

Arguments:
str - input string

3.5.37 ‘string-downcase!’ - make a string be lower case

Usage: (string-downcase! str)
Change to lower case all the characters in an SCM string.

Arguments:
str - input/output string

3.5.38 ‘string-end-eqv-match?’ - caseless regex ending

Usage: (*~ text match)
string-end-eqv-match?: Test to see if a string ends with a pattern. Case is not significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.39 ‘string-end-match?’ - regex match end

Usage: (*~~ text match)
string-end-match?: Test to see if a string ends with a pattern. Case is significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.40 ‘string-ends-eqv?’ - caseless string ending

Usage: (*= text match)
string-ends-eqv?: Test to see if a string ends with an equivalent string.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.41 ‘string-ends-with?’ - string ending

Usage: (*== text match)
string-ends-with?: Test to see if a string ends with a substring. strcmp(3) returns zero for comparing the string ends.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.42 ‘string-equals?’ - string matching

Usage: (== text match)
string-equals?: Test to see if two strings exactly match.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.43 ‘string-eqv-match?’ - caseless regex match

Usage: (~ text match)
string-eqv-match?: Test to see if a string fully matches a pattern. Case is not significant, but any character equivalences must be expressed in your regular expression.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.44 ‘string-eqv?’ - caseless string match

Usage: (= text match)
string-eqv?: Test to see if two strings are equivalent. ‘equivalent’ means the strings match, but without regard to character case and certain characters are considered ‘equivalent’. Viz., ’-’, ’_’ and ’^’ are equivalent. If the arguments are not strings, then the result of the numeric comparison is returned.

This is an overloaded operation. If the arguments are not both strings, then the query is passed through to scm_num_eq_p().

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.45 ‘string-has-eqv-match?’ - caseless regex contains

Usage: (*~* text match)
string-has-eqv-match?: Test to see if a string contains a pattern. Case is not significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.46 ‘string-has-match?’ - contained regex match

Usage: (*~~* text match)
string-has-match?: Test to see if a string contains a pattern. Case is significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.47 ‘string-match?’ - regex match

Usage: (~~ text match)
string-match?: Test to see if a string fully matches a pattern. Case is significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.48 ‘string-start-eqv-match?’ - caseless regex start

Usage: (~* text match)
string-start-eqv-match?: Test to see if a string starts with a pattern. Case is not significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.49 ‘string-start-match?’ - regex match start

Usage: (~~* text match)
string-start-match?: Test to see if a string starts with a pattern. Case is significant.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.50 ‘string-starts-eqv?’ - caseless string start

Usage: (=* text match)
string-starts-eqv?: Test to see if a string starts with an equivalent string.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.51 ‘string-starts-with?’ - string starting

Usage: (==* text match)
string-starts-with?: Test to see if a string starts with a substring.

Arguments:
text - text to test for pattern
match - pattern/substring to search for

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]

3.5.52 ‘string-substitute’ - multiple global replacements

Usage: (string-substitute source match repl)
match and repl may be either a single string or a list of strings. Either way, they must have the same structure and number of elements. For example, to replace all less than and all greater than characters, do something like this:

(string-substitute source
("&"     "<"    ">")d valign="middle" align="left">[ Up ]