Alphabetical Index

execute the process with a specific handler

non-public method callable only by derived classes that implement setAsOfDate (so that derived tasks that do not accept this parameter will fail if user attempts to use it.

non-public method callable only by derived classes that implement setAsOfDateFormat (so that derived tasks that do not accept this parameter will fail if user attempts to use it.

protected function to allow subclasses to set the label (or not).

Chmod task for setting file and directory permissions.

An abstract implementation of the analyzer interface providing support for the bulk of interface methods.

Setup the analyzer

original Cvs.java 1.20 NOTE: This implementation has been moved here from Cvs.java with the addition of some accessors for extensibility.

empty no-arg constructor

Class that holds an implicit patternset and supports nested patternsets and creates a DirectoryScanner using these patterns.

Construct a new AbstractFileSet.

Construct a new AbstractFileSet, shallowly cloned from the specified AbstractFileSet.

Abstract class to support vendor-specific hot deployment tools.

Somewhat abstract framework to be used for other metama 2.0 tasks.

Sole constructor.

initialize the task with the classname of the task to run

This is the a base class a container of selectors - it does not need do be a selector itself.

abstract access flag

final access flag

interface access flag

native access flag

private access flag

protected access flag

public access flag

static access flag

strict access flag

super access flag

synchronized access flag

transient access flag

volatile access flag

Check whether a given <classname><method>() is accepted by the list of filters or not.

EnumeratedAttribute implementation supporting the javadoc scoping values.

EnumeratedAttribute implementation supporting the javadoc scoping values.

an action to perform, one of "send", "put", "recv", "get", "del", "delete", "list", "mkdir", "chmod", "rmdir"

The delete action String *

The deploy action String *

The list action String *

The undeploy action String *

The update action String *

A list of possible values for the setAction() method.

Logs information about failed tests, potentially stops processing (by throwing a BuildException) if a failure/error occured or sets a property.

add a chainfilter

Add an arbitrary filter

Add an arbitrary condition

Add a FileSet.

Adds a nested path

Add an arbitary selector.

add an arbitary selector

add an arbitary selector

add an arbitrary selector

add an arbitary selector

add an arbitary selector

Add a FileNameMapper.

A nested filenamemapper

Add a nested FileNameMapper.

Add a nested FileNameMapper.

A nested filenamemapper

Add a nested filenamemapper.

Add a nested FileNameMapper.

Add a FileNameMapper.

A nested filenamemapper

add an arbitrary tokenizer

Adds a file to be added into the output.

Adds several file to be added into the output.

convenient method for JDK 1.1.

Add an <and> condition "container".

Add an "And" selector entry on the selector list.

add an "And" selector entry on the selector list

add an "And" selector entry on the selector list

add an "And" selector entry on the selector list

add an "And" selector entry on the selector list

add an "And" selector entry on the selector list

Adds zipfileset.

add an argument oneple to the argument list, if the value aint null

add an argument tuple to the arg list, if the file parameter aint null

add an argument tuple to the argument list, if the value aint null

add an argument to a command line; do nothing if the arg is null or empty string

concatenate two strings together and add them as a single argument, but only if argument2 is non-null and non-zero length

append the arguments to the existing command

add an argument to a command line; do nothing if the arg is null or empty string

append all the arguments to the tail of a supplied list

Enumerated attribute with the values "asis", "add" and "remove".

assertions to enable in this program (if fork=true)

Assertions to enable in this program (if fork=true)

Add an attribute definition to this script.

Create an instance of a factory attribute.

Add an attribute to the section

Add an <available> condition.

Adds "bcc" address elements

Add a single object into the script context.

Add a list of named objects to the list to be exported to the script

Set the text to be placed at the bottom of each output file.

Set the text to be placed at the bottom of each output file.

Add a build listener to the list.

Adds the listeners specified in the command line arguments, along with the default listener, to the specified project.

Adds "cc" address element

Add an <checksum> condition.

Adds a child element to the wrapped element.

Adds a child element to this element.

add files under WEB-INF/classes

Add a classpath to the classpath being used by the analyzer.

Add a classpath to the classpath being used by the analyzer.

Search for the given resource and add the directory or archive that contains it to the classpath.

Search for the given resource and add the directory or archive that contains it to the classpath.

This method adds a command line argument to an external command.

This needs to be public to allow configuration of commands externally.

add the entire command, including (optional) executable to a list

add Commands unique to C#.

add any compiler specifics

add jvc specific commands

implement VBC commands

Adds Ant resolver to run an Ant build file to generate a library.

Add an attribute element.

Add an attribute to the manifest - it is added to the main section.

Add an attribute to the section.

Add an attribute to the manifest - it is added to the main section.

Adds an attribute that is to be put in main section of manifest.

Adds direct command-line to execute.

Configures and adds the given Commandline.

Adds a comment element to the list of prefixes.

Adds a contains element.

Adds a set of extensions that this library requires.

Add an element element.

Add the error file mapper.

Set the Extension looking for.

Adds an extension that this library implements.

Set the Extension looking for.

Adds a set of extensions to search in.

Add a nested <file> nested element.

Add a Filterset to this filter set.

Adds a permission to be granted.

Add the input file mapper.

Adds location resolver to look for a library in a location relative to project directory.

Allows the manifest for the archive file to be provided inline in the build file rather than in an external file.

Add a Mapper.

Add a Mapper

Add a Mapper.

Adds a set of extensions that this library optionally requires.

Add the output file mapper.

This is a patternset nested element.

Add a RedirectorElement to this task.

Add a RedirectorElement to this task.

Adds a regexp element.

Adds a permission to be revoked.

Add a nested root class definition to this class file set.

Add a section to the manifest

Add a section to the manifest

Adds a system property that tests can access.

Add a target to this Ant invocation.

Add a target to the list of targets to invoke.

Add the text element.

Adds a token element to the map of tokens to replace.

Adds a URL resolver to download a library from a URL to a local file.

Loads a nested <xmlcatalog> into our definition.

add an XMLCatalog as a nested element; optional.

add an XMLCatalog as a nested element; optional.

Add the catalog to our internal catalog

Add a <contains> condition.

Add a contains selector entry on the selector list.

add a contains selector entry on the selector list

add a contains selector entry on the selector list

add a contains selector entry on the selector list

add a contains selector entry on the selector list

add a contains selector entry on the selector list

containsregex

contains regex filter

Add a regular expression selector entry on the selector list.

add a regular expression selector entry on the selector list

add a regular expression selector entry on the selector list

add a regular expression selector entry on the selector list

add a regular expression selector entry on the selector list

add a regular expression selector entry on the selector list

contains string filter

Add a continuation line from the Manifest file.

Adds the command line arguments specific to the current implementation.

Add an extended selector entry on the selector list.

add an extended selector entry on the selector list

add an extended selector entry on the selector list

add an extended selector entry on the selector list

add an extended selector entry on the selector list

add an extended selector entry on the selector list

Add a group of daemon threads

Adds the wrapper for a data type element to this target.

Describe addDataTypeDefinition method here.

Adds a new datatype definition.

Add a new datatype definition.

Add a selector date entry on the selector list.

add a selector date entry on the selector list

add a selector date entry on the selector list

add a selector date entry on the selector list

add a selector date entry on the selector list

add a selector date entry on the selector list

Add a pattern to the default excludes unless it is already a default exclude.

Add default exclusions to the current exclusions set.

Adds default exclusions to the current exclusions set.

add a define to the list of definitions

Add a definition using the attributes of Definer

add all definitions (including property sets) to a list

delete characters filter

delete chars

Add a depends selector entry on the selector list.

add a depends selector entry on the selector list

add a depends selector entry on the selector list

add a depends selector entry on the selector list

add a depends selector entry on the selector list

add a depends selector entry on the selector list

Adds a dependency to this target.

Add a deployment tool to the list of deployment tools that will be processed

Add a depth selector entry on the selector list.

add a depth selector entry on the selector list

add a depth selector entry on the selector list

add a depth selector entry on the selector list

add a depth selector entry on the selector list

add a depth selector entry on the selector list

Add a DifferentSelector entry on the selector list.

adds a different selector to the selector list

adds a different selector to the selector list

add a type selector entry on the type list

add the different selector

Add a set of directories upon which to operate.

Adds a nested <dirset> element.

Adds a directory set to the implicit build path.

disable assertions

Add a document title to use for the overview page.

Add a document title to use for the overview page.

Adds a Draw ImageOperation to the chain.

Creates the nested <dtd> element.

Add a nested element definition.

enable assertions

Creates the nested <entity> element.

This method overrides the superclass method of the same name in order to add catalog entries back to the controlling XMLCatalog instance.

Add an entry to the constant pool.

Add an environment variable to the launched process.

Adds an environment variable.

Adds an environment variable; used when forking.

Add an <equals> condition.

A test caused an error.

Interface TestListener.

Interface TestListener.

Empty

Interface TestListener.

exclude classes and methods from the analysis

Add a package to be excluded from the javadoc run.

Add a package to be excluded from the javadoc run.

Add to the list of exclude patterns to use.

Adds the components on the given path which exist to this Path.

Same as addExisting, but support classpath behavior if tryUserDir is true.

Emulation of extdirs feature in java >= 1.2.

Add Extension to the specified manifest Attributes.

Add Extension to the specified manifest Attributes.

Adds an extension that this library requires.

Adds an extra fields - replacing an already present extra field of the same type.

Interface TestListener for JUnit > 3.4.

Interface TestListener for JUnit > 3.4.

Interface TestListener for JUnit > 3.4.

Interface TestListener for JUnit > 3.4.

Interface TestListener for JUnit > 3.4.

Interface TestListener for JUnit <= 3.4.

Interface TestListener for JUnit <= 3.4.

Interface TestListener for JUnit <= 3.4.

Empty

Interface TestListener for JUnit <= 3.4.

List of files to concatenate.

Add a list of source files upon which to operate.

Adds a nested <filelist> element.

Adds an ordered file list to the implicit build path.

Add a filelist to touch.

Add a selector filename entry on the selector list.

add a selector filename entry on the selector list

add a selector filename entry on the selector list

add a selector filename entry on the selector list

add a selector filename entry on the selector list

add a selector filename entry on the selector list

Adds source and dest files to the command line.

finish off the command by adding all dependent files, execute

The java files or directory to audit.

Add a new fileset instance to this batchtest.

Adds a set of files to archive.

Adds a set of files to copy.

Adds a set of files about which cvs logs will be generated.

Files to generate checksums for.

Set of files to concatenate.

Adds a set of files to copy.

the classnames to execute.

add a fileset containing the snapshots to include.

Adds a set of files to be deleted.

Adds a set of files (nested fileset attribute).

Add a set of files upon which to operate.

Add a fileset

Adds a set of files about which extensions data will be extracted.

A set of files to upload or download

Adds a fileset.

Adds a set of files to be deleted.

Adds a set of files about which library data will be displayed.

Adds a fileset.

Add a fileset whose files will be added to Perforce.

Adds a fileset to be examined by p4fstat.

Adds a nested <fileset> element.

list files to apply the replacement to

Adds a FileSet tranfer to remote host.

Adds a set of files to sign

Adds a set of files (nested fileset attribute).

Adds a file set to the implicit build path.

Add a fileset to this task.

Adds a set of files to copy.

Add a set of files to touch.

Adds a set of files to translate as a nested fileset element.

Adds a set of files (nested fileset attribute).

Add a new fileset containing the XML results to aggregate

specify a set of file to be checked

Adds a set of files.

Add a <filesmatch> condition.

add the list of files to a command

Utility method that encapsulates the logic of adding a file entry to a .jar file.

add a file tokenizer

Add a new filter.

Add a new filter made from the given token and value.

Add a filter to the set of global filters.

Adds a FilterChain.

Add the FilterChain element.

Adds a FilterChain.

Add a footer to the concatenated output

Set the footer text to be placed at the bottom of each output file.

Set the footer text to be placed at the bottom of each output file.

Add a new formatter to all tests of this task.

Adds a from address element

Creates a generic deployment tool.

Add a header to the concatenated output

Set the header text to be placed at the top of each output file.

Set the header text to be placed at the top of each output file.

Add an <http> condition.

ignoreBlank

ignore blank filter

Adds an ImageOperation to chain.

Command line argument.

include classes and methods in the analysis

Add a <isfalse> condition.

Add an <isreference> condition.

Add an <isset> condition.

Add a <istrue> condition.

list of extra modules to refer to

add any libraries that come with different java versions here

Add the Java Runtime classes to this Path instance.

Creates a JOnAS deployment tool, for deployment to JOnAS servers.

add files under WEB-INF/lib/

Adds a set of files about which extensions data will be extracted.

add a line tokenizer - this is the default.

Adds a package root to the list of packages which must be loaded using this loader.

Add location to build exception.

Add a majority selector entry on the selector list.

add a majority selector entry on the selector list

add a majority selector entry on the selector list

add a majority selector entry on the selector list

add a majority selector entry on the selector list

add a majority selector entry on the selector list

Add a mapper to convert the file names.

Defines the mapper to map source to destination files.

Adds a file to be merged into the output.

Adds several files to be merged into the output.

Add a message element

Adds a zipfileset to include in the META-INF directory.

add a method trigger

Add the modified selector.

add the modified selector

add the modified selector

add the modified selector

add the modified selector

add the modified selector

Add a "None" selector entry on the selector list.

add a "None" selector entry on the selector list

add a "None" selector entry on the selector list

add a "None" selector entry on the selector list

add a "None" selector entry on the selector list

add a "None" selector entry on the selector list

Add an <not> condition "container".

Add a "Not" selector entry on the selector list.

add a "Not" selector entry on the selector list

add a "Not" selector entry on the selector list

add a "Not" selector entry on the selector list

add a "Not" selector entry on the selector list

add a "Not" selector entry on the selector list

Add an <or> condition "container".

Add an "Or" selector entry on the selector list.

add an "Or" selector entry on the selector list

add an "Or" selector entry on the selector list

add an "Or" selector entry on the selector list

add an "Or" selector entry on the selector list

add an "Or" selector entry on the selector list

Add a target to the project, or replaces one with the same name.

Add a target to the project, or replaces one with the same name.

Add an <os> condition.

Add a single package to be processed.

Add a single package to be processed.

Adds a packageset.

Adds a packageset.

Create new parameters to pass to custom selector.

Support for nested <param> tags.

Support for nested <param> tags.

Add a parameter to be set during the XSL transformation.

Add a parameter to be set during the XSL transformation.

Add a parameter to be set during the XSL transformation.

Ensure all parent dirs of a given entry have been added.

Adds an element to the classpath to be searched.

Add a file to the path

Add a file to the path.

Add a patternset

Add a present selector entry on the selector list.

add a present selector entry on the selector list

add a present selector entry on the selector list

add a present selector entry on the selector list

add a present selector entry on the selector list

add a present selector entry on the selector list

iterate through a set of properties, resolve them then assign them

Corresponds to <ant>'s nested <property> element.

add a name value pair to the project property set

Add a property reference (nested element) to the references to be used.

Add a set of properties to pass to the new project.

Set of properties to pass to the new project.

A set of properties to write.

Add another property set to this set.

Corresponds to <ant>'s nested <propertyset> element.

Add a PUBLIC catalog entry to the controlling XMLCatalog instance.

Specify a project within the PVCS repository to extract files from.

Add a Reference element identifying a data type to carry over to the new project.

Reference element identifying a data type to carry over to the invoked target.

Corresponds to <ant>'s nested <reference> element.

add a new reference fileset to the compilation

add a new reference fileset to the compilation

Add a reference to the project.

run through the list of reference files and add them to the command

replaceregex

replace regex filter

replacestring

replace string filter

Adds a replyto address element

link or embed a resource

for every resource declared, we get the (language specific) resource setting

Add the given resources.

Add a root class.

Add a root class.

Add a fileset to which contains a collection of root classes used to drive the search from classes.

Adds a Rotate ImageOperation to the chain

Adds a Scale ImageOperation to the chain

Add a "Select" selector entry on the selector list.

add a "Select" selector entry on the selector list

add a "Select" selector entry on the selector list

add a "Select" selector entry on the selector list

add a "Select" selector entry on the selector list

add a "Select" selector entry on the selector list

Add a selector size entry on the selector list.

add a selector size entry on the selector list

add a selector size entry on the selector list

add a selector size entry on the selector list

add a selector size entry on the selector list

add a selector size entry on the selector list

Add a <socket> condition.

Add a single source file.

Add a single source file.

Add a source path to the source path used by this analyzer.

Add a source path to the source path used by this analyzer.

add a new source directory to the compile

Add a list of source files.

Nested <srcfiles> element.

Add a set of source files.

add a string tokenizer

Adds any classes the user specifies using support nested elements to the ejbFiles Hashtable.

add a set of system properties

add a propertyset to the total set

add a system property

Adds a system property.

Adds a system property that tests can access.

Add a nested sysproperty element.

add a set of system properties

add a propertyset to the total set

Adds a set of properties as system properties.

Adds a set of properties that will be used as system properties that tests can access.

Adds a package root to the list of packages which must be loaded on the parent loader.

Add a taglet

Add a taglet

add a new target

Add a new target to the project.

Add a new target to the project.

Add a list of target files.

Add a set of target files.

add a task to the list of tasks

Add a task or type to the container.

Add a unknownElement for the macro instances nested elements.

Add an unknown element (to be snipped into the macroDef instance)

Add a nested task to execute in parallel.

Add a nested task to execute parallel (asynchron).

Add a nested task to predefine attributes and elements on

Add a nested task to Sequential.

Adds a task to this target.

Adds a task to this task container

Adds a new task definition to the project.

Add a new task definition to the project.

Add a new single testcase.

Add a new testsuite node to the document.

Adds characters from #PCDATA areas to the wrapped element.

Adds the content of #PCDATA sections to an element.

Adds PCDATA to an element, using the element's void addText(String) method, if it has one.

Adds the content of #PCDATA sections to an element.

This method adds text which appears in the 'concat' element.

set the text using inline

Adds descriptive text to the project.

Set a multiline message.

Set a multiline message.

Add text to the element.

Set a multiline message.

Add text to the element.

Set the text contents for the macro.

Adds a textual part of the message

the text of the element

the message as nested text

Adds characters from #PCDATA areas to the wrapped element.

Set the script text.

Set the script text.

The script text.

Set the script text.

Set an inline SQL command to execute.

the message as nested text

name of test.

Add a timeout observer.

Adds a to address element

trim

trim filter

Add a selector type entry on the selector list.

adds a type selector to the selector list

adds a type selector to the selector list

add a type selector entry on the type list

add the type selector

Add an <uptodate> condition.

Add a URI catalog entry to the controlling XMLCatalog instance.

Add a user to list changelog knows about.

Add a new value to this attribute - making it multivalued.

add a variable.

Add any vendor specific files which should be included in the EJB Jar.

Add any vendor specific files which should be included in the EJB Jar.

Add the iAS-specific EJB descriptor to the list of files which will be written to the JAR file.

Add any vendor specific files which should be included in the EJB Jar.

Add any vendor specific files which should be included in the EJB Jar.

Add any vendor specific files which should be included in the EJB Jar.

Add any vendor specific files which should be included in the EJB Jar.

Add any vendor specific files which should be included in the EJB Jar.

Adds a single webapp.

files to add under WEB-INF;

Creates a WebLogic deployment tool, for deployment to WebLogic servers.

Adds a set of files that can be read from an archive and be given a prefix/fullpath.

Adds a group of zip files.

Assumes a negative integer really is a positive integer that has wrapped around and re-creates the original value.

Transform a JUnit xml report.

The Algorithm defines how a value for a file is computed.

The alias of signer.

The alias of signer.

return an enumeration listing each test, then each batchtest

The analyzer class for the super analyzer

The analyzer class for the super analyzer

A dependency analyzer name to find all related classes

A dependency analyzer name for no analyzer

A dependency analyzer name to find ancestor classes

A dependency analyzer which returns superclass and superinterface dependencies.

Default constructor Causes the BCEL classes to load to ensure BCEL dependencies can be satisfied

<and> condition container.

This selector has a collection of other selectors, all of which have to select a file in order for this selector to select it.

Default constructor.

Uses ANSI Color Code Sequences to colorize messages sent to the console.

Build a sub-project.

The URI for ant name space

The URI for antlib current definitions

The directory name of the per-user ant directory

The location of a per-user library directory

Polymorphic attribute

An analyzer which uses the depend task's bytecode classes to analyze dependencies

Default constructor

Used to load classes within ant with a different classpath from that used to start ant.

Create an Ant Class Loader

Creates an empty class loader.

Creates a classloader for the given project using the classpath given.

Creates a classloader for the given project using the classpath given.

Creates a classloader for the given project using the classpath given.

An implementation of the AntClassLoader suitable for use on post JDK 1.1 platforms

Constructor

An AntFileReader is a wrapper class that encloses the classname and configuration of a Configurable FilterReader.

an AntFTPFile is a representation of a remote file

constructor

other constructor

special class to represent the remote directory itself

constructor

The common superclass for all SAX event handlers used to parse the configuration file.

The Ant Home property

Antlib task.

The URI for defined types/tasks - the format is antlib:

Base class for tasks that that can be used in antlibs.

The Ant Library Directory property

Invokes the ANTLR Translator generator on a grammar file.

Sole constructor.

Interface used to bridge to the actual Main class without any messy reflection

Resolver that just returns s specified location.

This class handles the abstraction of the rexec protocol.

This class is designed to be used by any AntTask that requires audio output.

Checks out files from a specific StarTeam server, project, view, and folder.

Creates a partial DTD for Ant from the currently known tasks.

This class handles the abstraction of the telnet protocol.

This class contains all the information on a particular ant type, the classname, adaptor and the class it should be assignable from.

Context information for the ant processing.

constructor

The name of the bridge to the Apache xml-commons resolver class, used to determine whether resolver.jar is present in the classpath.

This class extends the Catalog class provided by Norman Walsh's resolver library in xml-commons in order to add classpath entity and URI resolution.

This class extends the CatalogResolver class provided by Norman Walsh's resolver library in xml-commons.

Append one enumeration to another.

Append the contents of the other Path instance to this.

Adds the patterns of the other instance to this set.

Allow builtin (all, system or commandline) properties in the set.

Adds a nested CDATA section.

Adds a nested CDATA section in a new child element.

Append all files found by a directory scanner to a vector.

Allow properties of a particular name in the set.

Allow properties whose names start with a prefix in the set.

Allow properties whose names match a regex in the set.

Add a new selector into this container.

Add a new selector into this container.

Add a new selector into this container.

Add a new selector into this container.

Add a new selector into this container.

Add a new selector into this container.

Adds nested text.

Adds nested text in a new child element.

Apply this map entry to a given path element.

add the assertions to a list in a format suitable for adding to a command line

add the assertions to a list in a format suitable for adding to a command line

apply all the assertions to the command.

Apply presets, attributes and text are set if not currently set.

This is used then the realobject of the UE is a PreSetDefinition.

if the proxy port and host settings are not null, then the settings get applied these settings last beyond the life of the object and apply to all network connections Relevant docs: buglist #4183340

Is the archive up to date in relationship to a list of files.

Is the archive up to date in relationship to a list of files.

Holds the up-to-date status and the out-of-date resources of the original archive.

Do the Strings all match the XML-NMTOKEN production?

Otherwise they are not suitable as an enumerated attribute, for example.

Used for nested xml command line definitions.

gives the boolean equivalent of the authorized values

Adds Unix file permission and UID/GID fields as well as symbolic link handling.

The assertion datatype.

Ensures this data type is not a reference.

Shall we assume JDK 1.1 command line switches?

Shall we assume JDK 1.2 command line switches?

Shall we assume JDK 1.3 command line switches?

Shall we assume JDK 1.4 command line switches?

Shall we assume JDK 1.5 command line switches?

classname attribute for testcase elements

errors attribute for testsuite elements

failures attribute for testsuite elements

id attribute

message attribute for failure elements

name attribute for property, testcase and testsuite elements

package attribute for the aggregate document

tests attribute for testsuite elements

time attribute for testcase and testsuite elements

type attribute for failure and error elements

value attribute for property elements

Attrib equivalent for Win32 environments.

Sole constructor.

A nested element for the MacroDef task.

An attribute for the manifest.

Class representing an attribute definition

The class to create to set a feature of the parser.

A JAXP factory attribute.

Construct an empty attribute

Construct an attribute by parsing a line from the Manifest

Construct a manifest by specifying its name and value

The Class-Path Header is special - it can be duplicated

The From Header is disallowed in a Manifest

The standard manifest version header

The Name Attribute is the first in a named section

The standard Signature Version header

Attribute info structure that provides base methods

Constant to show that the best available mailer should be used.

Will set the given property if the requested resource is available at runtime.

Get the available data that can be read from the current entry in the archive.

Ensure that a string is backslashing slashes so that it does not confuse them with Perl substitution delimiter in Oro.

BASE 64 encoding of a String or an array of bytes.

base class for our assertion elements.

The base directory to be scanned.

Convenience base class for all selectors accessed through ExtendSelector.

Default constructor.

Base class for core filter readers.

Constructor used by Ant's introspection mechanism.

Creates a new filtered reader.

Naming scheme where the generated jar is named by the basejarname attribute

Sets a property to the base name of a specified file, optionally minus a suffix.

Parameterized base class for core filter readers.

Constructor for "dummy" instances.

Creates a new filtered reader.

A convenience base class that you can subclass Selectors from.

Do nothing constructor.

This is the base class for selectors that can contain other selectors.

Default constructor.

Baseclass for BatchTest and JUnitTest.

Create then run JUnitTest's based on the list of files given by the fileset attribute.

create a new batchtest instance

Sets the bcc address.

begin a download

begin a download

begin a download

BorlandDeploymentTool is dedicated to the Borland Application Server 4.5 and 4.5.1 This task generates and compiles the stubs and skeletons for all ejb described into the Deployment Descriptor, builds the jar file including the support files and verify whether the produced jar is valid or not.

Generates a Borland Application Server 4.5 client JAR using as input the EJB JAR file.

Extention of EnumeratedAttribute to hold the values for style.

Prints plain text output of the test to a specified Writer.

Constructor for BriefJUnitResultFormatter.

This buffer servers as a Deflater.

The size of the buffer to be used.

A class to be extended by any BuildAlert's that require the output of sound.

Builds the prefix arguments to pass to weblogic.deploy.

Builds a command line to execute ss.

Builds a command line to execute ss.

Builds a command line to execute ss.

Builds a command line to execute ss.

Build the command line.

Build the command line
CheckOutFile required parameters: -server -name -password -database -project -file
CheckOutFile optional parameters: -workdir -verbose -nocache -nocompression -soshome
CheckOutProject required parameters: -server -name -password -database -project
CheckOutProject optional parameters:-workdir -recursive -verbose -nocache -nocompression -soshome

Build the command line
GetFile required parameters: -server -name -password -database -project -file
GetFile optional parameters: -workdir -revision -verbose -nocache -nocompression -soshome
GetProject required parameters: -server -name -password -database -project
GetProject optional parameters: -label -workdir -recursive -verbose -nocache -nocompression -soshome

Build the command line
AddLabel required parameters: -server -name -password -database -project -label
AddLabel optional parameters: -verbose -comment

Builds the arguments to pass to weblogic.deploy for deployment actions ("deploy" and "update").

Class representing an event occurring during a build.

Construct a BuildEvent for a project level event.

Construct a BuildEvent for a target level event.

Construct a BuildEvent for a task level event.

Signals an error condition during a build

Constructs a build exception with no descriptive information.

Constructs an exception with the given descriptive message.

Constructs an exception with the given descriptive message and a location in a file.

Constructs an exception with the given message and exception as a root cause.

Constructs an exception with the given message and exception as a root cause and a location in a file.

Constructs an exception with the given exception as a root cause.

Constructs an exception with the given exception as a root cause and a location in a file.

create the list of files

Cleans up any resources held by this classloader at the end of a build.

Fired after the last target has finished.

Signals that the last target has finished.

Prints whether the build succeeded or failed, any errors the occurred during the build, and how long the build took.

Clears all storage used by this class, including the static cache of helpers.

Sends an e-mail with the log results.

Fired when the build finishes, this adds the time taken and any error stacktrace to the build element and writes the document to disk.

This exception is thrown when a build is interrupted

Builds the arguments to pass to weblogic.deploy for the list action

Instances of classes that implement this interface can register to be notified when things happened during a build.

Interface used by Ant to log the build output.

Add to a map of files/directories to copy

Read, increment, and write a build number in a file It will first attempt to read a build number from a file, then set the property "build.number" to the value that was read in (or 0 if no such value).

Empty implementation to satisfy the BuildListener interface.

Fired before any targets are started.

Signals that a build has started.

Responds to a build being started by just remembering the current time.

Empty implementation to satisfy the BuildListener interface.

Fired when the build starts, this builds the top-level element for the document and remembers the time of the start of the build.

Builds the arguments to pass to weblogic.deploy for undeployment actions ("undeploy" and "delete").

Used for propertyref's builtin attribute.

Expands a file that has been compressed with the BZIP2 algorithm.

Enumerated attribute with the values for units.

Compresses a file with the BZIP2 algorithm.

Base class for both the compress and decompress classes.

Create a CAB archive.

A Cache let the user store key-value-pairs in a permanent manner and access them.

Call another target in the same project.

Used for parameterized custom selector

Used for parameterized custom selector

Resolver base class

An input stream that decompresses from the BZip2 format (without the file header chars) to be read as any other stream.

An output stream that compresses into the BZip2 format (without the file header chars) into another stream.

Sets the cc address.

Performs ClearCase checkin.

Performs ClearCase checkout.

Performs a ClearCase Lock command.

Class common to all check commands (checkout, checkin,checkin default task);

Performs Continuus checkin command.

Default constructor - setup checkin command

Performs Continuus Checkin Default task command.

Sole constructor.

Performs Continuus checkout command.

default constructor

Creates new Continuus ccm task and sets it as the default.

Sole constructor.

Task to perform mkattr command to ClearCase.

Task to CreateBaseline command to ClearCase.

Performs ClearCase mkdir.

Performs ClearCase mkelem.

Task to perform mklabel command to ClearCase.

Task to perform mklbtype command to ClearCase.

Task allows to reconfigure a project, recursively or not

Sole constructor.

Task to perform rmtype command to ClearCase.

Performs ClearCase UnCheckout command.

Performs a ClearCase Unlock command.

Performs a ClearCase Update command.

This method is used to center dialogs.

central file header signature

Returns a reader with the same configuration as this one, but filtering input from the specified reader.

Creates a new ClassConstants using the passed in Reader for instantiation.

Creates a new ConcatReader using the passed in Reader for instantiation.

Creates a new EscapeUnicode using the passed in Reader for instantiation.

Creates a new ExpandProperties filter using the passed in Reader for instantiation.

Creates a new HeadFilter using the passed in Reader for instantiation.

Creates a new LineContains using the passed in Reader for instantiation.

Creates a new LineContainsRegExp using the passed in Reader for instantiation.

Creates a new PrefixLines filter using the passed in Reader for instantiation.

Creates a new ReplaceTokens using the passed in Reader for instantiation.

Creates a new StripJavaComments using the passed in Reader for instantiation.

Creates a new StripLineBreaks using the passed in Reader for instantiation.

Creates a new StripLineComments using the passed in Reader for instantiation.

Creates a new TabsToSpaces using the passed in Reader for instantiation.

Creates a new TailFilter using the passed in Reader for instantiation.

Creates a new TokenFilter using the passed in Reader for instantiation.

Chain a tokenfilter reader to a reader,

factory method to provide a reader that removes the characters from a reader as part of a filter chain

Interface indicating that a reader may be chained to another one.

Abstract class that converts derived filter classes into ChainableReaderFilter's

A ContainerMapper that chains the results of the first nested FileNameMappers into sourcefiles for the second, the second to the third, and so on, returning the resulting mapped filenames from the last nested FileNameMapper.

Process a FilterReader chain.

number of the change list to work on

number of the change list to work on

change list number

Examines the output of cvs log and group related changes together.

SAX parser call-back method invoked whenever characters are located within an element.

Handle text within an element, calls currentHandler.characters.

Handles text within an element.

Adds text to the task, using the wrapper

Add all available classes, that depend on Remote, Home, Bean, PK

check that it is ok to set attributes, i.e that no reference is defined

check that it is ok to add children, i.e that no reference is defined

Checks if the attributes are correct.

check if the attributes are correct

Has the user set all necessary attributes?

Ensure that all the required arguments and other conditions have been set.

Ensure that all the required arguments and other conditions have been set.

Has the user set all necessary attributes?

Check the configuration of this ExecuteOn instance.

Checks to see that all required parameters are set.

Verifies that the user selections are valid.

Check that this task has been configured properly.

This method is called as the first step in the processDescriptor method to allow vendor-specific subclasses to validate the task configuration prior to processing the descriptor.

Verifies that the user selections are valid.

This method is called as the first step in the processDescriptor method to allow vendor-specific subclasses to validate the task configuration prior to processing the descriptor.

Key to used for parameterized custom selector

Are we sure we don't hold circular references?

Subclasses are responsible for setting this value to false if we'd need to investigate this condition (usually because a child element has been added that is a subclass of DataType).

This method will rethrow the exception that was possibly caught during the run of the process.

Override SecurityManager#checkExit.

Will be called every time a namespace is reached.

validate options set

check for invalid options

wheck what is necessary to check, Coverage will do the job for us

check for mandatory options

check for mandatory options

validate the settings

validate options set

validate options set and resolve files and paths

Check that all required attributes have been set and nothing silly has been entered.

Override SecurityManager#checkPermission.

check if the proxy class is a valid class to use with this adapter.

Check if the proxy class is compatible with this adapter - i.e.

Used to create or verify file checksums.

Checks whether or not a class is suitable for serving as Ant task.

Check whether or not a class is suitable for serving as Ant task.

Checks whether or not a class is suitable to be adapted by TaskAdapter.

Chgrp equivalent for unix-like environments.

Chgrp task for setting unix group of a file.

The length of the checksum field in a header buffer.

Chmod equivalent for unix-like environments.

Chmod task for setting file and directory permissions.

Chown equivalent for unix-like environments.

Chown task for setting file and directory permissions.

Creates an exception that indicates the user has generated a loop of data types referencing each other.

Assembles the constants declared in a Java class in key1=value1(line separator)key2=value2 format.

Constructor for "dummy" instances.

Creates a new filtered reader.

The constant pool entry which stores class information.

Constructor.

A ClassFile object stores information about a Java class.

Object representing a class.

Iterator interface for iterating over a set of class files

A ClassfileSet is a FileSet that enlists all classes that depend on a certain set of root classes.

Default constructor.

Create a ClassfileSet from another ClassfileSet.

Utility class file routines.

Provides a quick and dirty way to determine the true name of a class given just an InputStream.

The user classpath to be provided.

Core of the bytecode analyzer.

create a new instance with a given set of urls

create a new instance with a given classpath.

create a new instance with a given set of urls.

Offers some helper methods on the Path structure in ant.

Inner class used to contain info about root classes.

clean up all the mess that we did with temporary objects

Cleans up any resources held by this classloader.

Make sure we don't think we already have a application.xml next time this task gets executed.

reset the monitor flag and the process.

Make sure we don't think we already have a MANIFEST next time this task gets executed.

cleanup the temporary txt report

clean up all the mess that we did with temporary objects

Make sure we don't think we already have a web.xml next time this task gets executed.

Do any clean up necessary to allow this instance to be used again.

Clear out the whole command line.

full cleanup

reset all contents.

reset all contents.

reset all contents.

Clear out the arguments but leave the executable in place for another operation.

Clear out the arguments to this java task.

A base class for creating tasks for executing commands on ClearCase.

Clear the curretn set of collected dependencies.

Clear out the java arguments.

Clear the result caches for a scan.

Creates a deep clone of this instance, except for the nested selectors (the list of selectors is a shallow clone of this instance's list).

clone the objects.

Clone this data type.

Generate a deep clone of the contained object.

clone the object; clone of all fields in the class

deep clone

Return a DirSet that has the same basedir and same patternsets as this one.

Return a FileSet that has the same basedir and same patternsets as this one.

Clone the filterset.

Clone this section

Return a Path that holds the same elements as this instance.

Clone this Resource.

Overwrite clone

Return a ZipFileSet that has the same properties as this one.

Equivalent to flushing the stream.

this method does nothing

this method does nothing

Writes all remaining

Writes all remaining

Closes the Stringreader.

Closes the underlying stream.

Close the TarBuffer.

Closes this stream.

Ends the TAR archive and closes the underlying OutputStream.

Close both output streams.

Closes the archive.

Closes this output stream and releases any system resources associated with the stream.

Close a stream without throwing any exception if something went wrong.

Close a stream without throwing any exception if something went wrong.

Close a stream without throwing any exception if something went wrong.

Close a Writer without throwing any exception if something went wrong.

Writes a DOM tree to a stream.

Close an entry.

Writes all necessary data for this entry.

Close the streams belonging to the given Process.

the command line used to run MAudit

CMP versions supported valid CMP versions are 1.0 and 2.0

A set of helper methods related to collection manipulation.

The 'Add' command

The 'Checkin' command

The 'Checkin' command

The 'Checkin' command

The 'Checkout' command

The 'Checkout' command

The 'Checkout' command

The 'CP' command

The 'Create' command

The 'CreateTask' command

The 'Reconfigure' command

The 'Get' command

The 'History' command

The 'Label' command

The 'Lock' command

The 'LsCheckout' command

The 'Mkattr' command

The 'Mkbl' command

The 'Mkdir' command

The 'Mkelem' command

The 'Mklabel' command

The 'Mklbtype' command

The 'Reconfigure' command

The 'Rmtype' command

The 'UndoCheckout' command

The 'Unlock' command

The 'Update' command

what is the command line

Commandline objects help handling command lines specifying processes to execute.

Commandline to be executed

Create an empty command line

create a command line from a string

A representation of a Java command line that is a composite of 2 Commandline.

constructor uses the VM we are running on now.

The class that holds a comment representation.

Jakarta Commons Logging listener.

Construct the listener and make sure that a LogFactory can be obtained.

Implements Comparator.compare().

Delegates to a comparison of names.

Enum used in (@link Extension) to indicate the compatability of one extension to another.

Enum used in (@link Extension) to indicate the compatibility of one extension to another.

Enum indicating that extension is compatible with other extension.

Enum indicating that extension is compatible with other Package Specification.

Perform the compilation.

Performs the actual compilation.

Performs the actual compilation.

Performs the actual compilation.

Do the compile with the specified arguments.

the name of this adapter for users to select

The interface that all compiler adapters must adhere to.

Creates the necessary compiler adapter, given basic criteria.

Complete redirection.

Component creation and configuration.

Creates a new ComponentHelper instance.

A ContainerMapper that unites the results of its constituent FileNameMappers into a single set of result filenames.

Compute the checksum of a tar entry header.

This class contains the 'concat' task, used to concatenate a series of files into a single stream.

Special InputStream that will concatenate the contents of an array of files.

Construct a new ConcatFileInputStream with the specified File[].

Concats a file before and/or after the file.

Constructor for "dummy" instances.

Creates a new filtered reader.

Concatenates the system class path in the order specified by the ${build.sysclasspath} property - using "last" as default value.

Concatenates the system class path in the order specified by the ${build.sysclasspath} property - using the supplied value if ${build.sysclasspath} has not been set.

Interface for conditions to use inside the <condition> task.

Baseclass for the <condition> task as well as several conditions - ensures that the types of conditions inside the task and the "container" conditions are in sync.

Task to set a property conditionally using <uptodate>, <available>, and many other supported conditions.

Configure an aspect of the analyzer.

Configure an aspect of the analyzer.

Configures this Selector.

Configure the given object from this UnknownElement

Configures an object using an introspection handler.

Configure this tool for use in the ejbjar task.

Configure this tool for use in the ejbjar task.

Configure the specified Redirector.

Configure the specified Redirector for the specified sourcefile.

Specific configuration for the TRaX liaison.

Configure the liasion from the XSLTProcess task

Configure a commandline element for things like cvsRoot, quiet, etc.

Scans an attribute list for the id attribute and stores a reference to the target object in the project if an id is found.

Loads the stylesheet and set xsl:param parameters.

Configures the project with the contents of the specified XML file.

Tag value for Class entries.

Tag value for Double entries.

Tag value for Field Reference entries.

Tag value for Float entries.

Tag value for Integer entries.

Tag value for Interface Method Reference entries.

Tag value for Long entries.

Tag value for Method Reference entries.

Tag value for Name and Type entries.

Tag value for String entries.

Tag value for UTF8 entries.

A Constant Pool entry which represents a constant value.

Initialise the constant entry.

The constant pool of a Java class.

Initialise the constant pool.

An entry in the constant pool.

Initialise the constant pool entry.

A FileNameMapper that contains other FileNameMappers.

Holds a contains element

Is one string part of another string?

Return true if this ContainerMapper or any of its sub-elements contains the specified FileNameMapper.

Used for parameterized custom selector

filter to filter tokens matching regular expressions.

Selector that filters files based on a regular expression.

Creates a new ContainsRegexpSelector instance.

Selector that filters files based on whether they contain a particular string.

Creates a new ContainsSelector instance.

Simple filter to filter lines contains strings

Delegates to contains.

Is this value included in the enumeration?

Compares the contents of two files.

Compares the contents of two files.

A base class for creating tasks for executing commands on Continuus 5.1.

Splits the task into setting up the command line switches (delegated to setup), adding the file names (delegated to addFiles) and running the tool (delegated to run).

Convert the encoding of srcFile writing to destFile.

Convert a class name from java source file dot notation to class file slash notation..

convert regex option flag characters to regex options

g - Regexp.REPLACE_ALL

i - Regexp.MATCH_CASE_INSENSITIVE

m - Regexp.MATCH_MULTILINE

s - Regexp.MATCH_SINGLELINE

Convert a class name from class file slash notation to java source file dot notation.

Copies a file or directory to a new file or directory.

Copy task constructor.

Copies a directory.

Copies the contents of the current tar archive entry directly into an output stream.

Copies a file.

Convenience method to copy a file from a source to a destination.

Convenience method to copy a file from a source to a destination.

Convenience method to copy a file from a source to a destination specifying if token filtering should be used.

Convenience method to copy a file from a source to a destination specifying if token filtering should be used and if source files may overwrite newer destination files.

Convenience method to copy a file from a source to a destination specifying if token filtering should be used, if source files may overwrite newer destination files, and if the last modified time of the resulting file should be set to that of the source file.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used and if source files may overwrite newer destination files.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if source files may overwrite newer destination files, the last modified time of destFile file should be made equal to the last modified time of sourceFile and which character encoding to assume.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if filter chains must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if filter chains must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Convenience method to copy a file from a source to a destination.

Convenience method to copy a file from a source to a destination.

Convenience method to copy a file from a source to a destination specifying if token filtering should be used.

Convenience method to copy a file from a source to a destination specifying if token filtering should be used and if source files may overwrite newer destination files.

Convenience method to copy a file from a source to a destination specifying if token filtering should be used, if source files may overwrite newer destination files, and if the last modified time of the resulting file should be set to that of the source file.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used and if source files may overwrite newer destination files.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if filter chains must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Convenience method to copy a file from a source to a destination specifying if token filtering must be used, if filter chains must be used, if source files may overwrite newer destination files and the last modified time of destFile file should be made equal to the last modified time of sourceFile.

Copy all user properties that have not been set on the command line or a GUI tool from this instance to the Project instance given as the argument.

Copies all user properties that have not been set on the command line or a GUI tool from this instance to the Project instance given as the argument.

Copy all user properties that have been set on the command line or a GUI tool from this instance to the Project instance given as the argument.

Copies all user properties that have been set on the command line or a GUI tool from this instance to the Project instance given as the argument.

Test whether or not a name matches the start of at least one include pattern.

Count the conditions.

name of the counter

Base class that deals with JProbe version incompatibilities.

Runs Sitraka JProbe Coverage.

Sole constructor.

Runs the snapshot merge utility for JProbe Coverage.

Sole constructor.

Runs the JProbe Coverage 3.0 snapshot merge utility.

Sole constructor.

Create an object using this creator, which is determined by introspection.

create an instance of the definition.

Fake create an object, used by IH and UE to see that this is a predefined object.

Establishes the object that contains the files to be added to the output.

Static method to read an ant lib definition from a url.

Adds a command argument.

Adds a command-line argument.

Add a nested argument element to hand to the deployment tool; optional.

Adds a command-line argument.

Adds a command-line argument.

Adds a command-line argument.

Adds an implementation specific command-line argument.

Adds an implementation specific command-line argument.

Creates an argument object.

create a new argument to the java program

Creates an argument object and adds it to our list of args.

Add an attribute nested element.

Create all attributes of a MetricsElement skipping those who have an empty string

Adds a set of tests based on pattern matching.

Create a Path to be configured with the boot classpath

Adds a path to the bootclasspath.

Adds a path to the bootclasspath.

Create a Path to be configured with the boot classpath

Adds path to bootstrap class files.

Adds a path to the bootclasspath.

Create a boot classpath.

Adds a deployment tool for Borland server.

Creates a nested build path, and add it to the implicit build path.

Creates a nested <buildpathelement>, and add it to the implicit build path.

Creates a nested <catalogpath> element.

Creates a named Element and appends it to the given element, returns it.

Adds class to process.

create an empty class element with its default cov.data (0)

Adds a path to class code to analyze.

Factory method to create a class loader for loading classes from a given path.

Add a classpath as a nested element.

Sets the class path (also source path unless one explicitly set).

Set the classpath to load the FilterReader through (nested element).

Adds a classpath to be set because a directory might be given for Antlr debug.

Classpath to be used when searching for classes and resources.

Adds path to the classpath.

Delegate method handling the <classpath> tag.

classpath to run the files.

Create the classpath to be used when searching for component being defined

Adds a classpath to be used for this dependency check.

Adds to the classpath used to locate the super classes and interfaces of the classes that will make up the EJB JAR.

Specify the classpath to use to load the Selector (nested element).

Add the classpath for the user classes

Create a Path to be configured with the classpath to use

Sets the classpath.

Adds to the classpath used when compiling the EJB stubs and skeletons.

Adds a path to the classpath.

Adds a path to the classpath.

Create a Path to be configured with the classpath to use

Path to use for classpath.

Add a path to the classpath for loading the driver.

Adds a path to the classpath.

Adds a path to the classpath.

Adds path to classpath used for tests.

Add a classpath to use when looking up a resource.

Set the classpath to load the FileNameMapper through (nested element).

The classpath to use when looking up a resource.

Creates a nested classpath element.

Adds a path to the classpath.

Maybe creates a nested classpath element.

Add the classpath for the user classes

The classpath to be used with the Java Virtual Machine that runs the Weblogic Shutdown command;

Allows nested classpath elements.

Set the optional classpath to the XSL processor

Create a classpath.

Adds an implementation specific command-line argument.

Adds an implementation specific command line argument.

Support nested compiler classpath, used to locate compiler adapter

Factory method to create the components.

Create an object for a component.

Add a condition element.

Creates a new instance of a data type.

Create a new instance of a data type.

Distinguished name list.

Create a doclet to be used in the documentation generation.

Create a doclet to be used in the documentation generation.

Create a DOM tree.

create the whole new document

Create a DTD location record.

Create a DTD location record; optional.

Create an element with the given name

Method present for BC purposes.

Create a nested element

Create an element with the given name

Create an element with the given name

Creates a named nested element.

Create an empty zip file

Create an empty zip file

Create a nested error FilterChain.

Add a name entry to the exclude list.

Add a name entry on the exclude list.

add a name entry on the exclude list

add a name entry on the exclude list

add a name entry on the exclude list

add a name entry on the exclude list

add a name entry on the exclude list

Add a name entry to the excludes files list.

add a name entry on the include files list

add a name entry on the include files list

add a name entry on the exclude files list

Create a new exec delegate.

Adds a path to extdirs.

Maybe creates a nested extdirs element.

Create an instance of the approriate ExtraField, falls back to UnrecognizedExtraField.

Create the factory element to configure a trax liaison.

add a sound when the build fails

Path to search for file resources.

Adds a FilterChain.

Defines class/method filters based on pattern matching.

Adds a filterset.

Create a new FiltersFile.

create a custom format with the current prefix.

Separates packages on the overview page into whatever groups you specify, one group per table.

Separates packages on the overview page into whatever groups you specify, one group per table.

Create the StreamHandler to use with our Execute instance.

Create the ExecuteStreamHandler instance that will be used during execution.

Create the StreamHandler to use with our Execute instance.

Add a name entry to the include list.

Add a name entry on the include list.

add a name entry on the include list

add a name entry on the include list

add a name entry on the include list

add a name entry on the include list

Add a name entry to the include files list.

add a name entry on the include files list

add a name entry on the include files list

add a name entry on the include files list

Create a nested input FilterChain.

Create an instance of a matcher from a classname.

Adds a deployment tool for iPlanet Application Server.

Adds a deployment tool for JBoss server.

Adds a deployment tool for JOnAS server.

Additional optional parameters to pass to the JVM.

Adds a new JVM argument.

Adds a JVM argument.

Add a nested argment element to hand to the JVM running the deployment tool.

Adds a JVM argument.

Adds a JVM argument; ignored if not forking.

Create a new JVM argument.

Create link to javadoc output at the given URL.

Create link to javadoc output at the given URL.

Creates a list file.

create a classloader for this definition

Create a nested MAP element.

Defines the mapper to map source to destination files.

Create a nested Mapper element to use for mapping source files to target files.

Defines the FileNameMapper to use (nested mapper element).

Defines the FileNameMapper to use (nested mapper element).

Defines the FileNameMapper to use (nested mapper element).

Create a mapper to map the property names.

Defines the FileNameMapper to use (nested mapper element).

Return a marker.

should be called only once to cache matchers

Establishes the object that contains the files to be merged into the output.

Create a merge mapper pointing to the specified destination file.

create an empty method element with its cov.data values

Create a nested element to be configured.

create our helper command

This was originally an emulation of File.createNewFile for JDK 1.1, but it is now implemented using that method (Ant 1.6.3 onwards).

Create a new file, optionally creating parent directories.

create node maps so that we can access node faster by their name

create an instance of the definition.

Create a nested output FilterChain.

Create an instance of an output property to be configured.

create an empty package element with its default cov.data (0)

Create a new Property to pass to the invoked target(s).

Create a doclet parameter to be configured by Ant.

Create a doclet parameter to be configured by Ant.

Create an instance of an XSL parameter for configuration by Ant.

create the parameter file from the given options.

create the parameters file that contains all file to merge and the output filename.

Creates all parent directories specified in a complete relative pathname.

Path of files to concatenate.

Create an empty nested path to be configured by Ant with the classpath for the extension.

Create an empty nested path to be configured by Ant with the classpath for the extension.

Set a new path (directory) to measure metrics from.

Creates a nested <path> element.

Create a nested PATH element.

Creates the nested <pathelement> element.

Creates a nested patternset.

Add a set of patterns.

add a set of patterns

add a set of patterns

Sets the permissions for the application run inside the same JVM.

Sets the permissions for the application run inside the same JVM.

Create the pump to handle error output.

Create the pump to handle process output.

Property to pass to the new project.

Creates a property.

Creates a stream pumper to copy the given input stream to the given output stream.

Creates a stream pumper to copy the given input stream to the given output stream.

A string to wait for from the server.

A string to wait for from the server.

Adds a set of classes whose coverage information will be checked against.

create the appropriate type of reference for the java version

A regular expression.

Wrapper over RegexpMatcherFactory.createInstance that ensures that we are dealing with a Regexp implementation.

Add a nested <replacefilter> element.

the token to filter as the text of a nested element

the string to replace the token as the text of a nested element

Generate a report based on the document created by the merge.

from a resource, get the resource param string

from a resource, get the

from a resource, get the resource param

from a resource, get the resource param

classpath for additional audit rules these must be placed before metamata.jar !!

search path to use for unused global declarations; required when unused is set.

This is the sequential nested element of the macrodef.

Override of base-class abstract function creates an appropriately configured view.

Override of base-class abstract function creates an appropriately configured view for checkouts - either the current view or a view from this.label or the raw view itself in the case of a revision label.

Override of base-class abstract function creates an appropriately configured view.

Override of base-class abstract function creates an appropriately configured view for checkoutlists - either the current view or a view from this.label.

Derived classes must override createSnapshotView defining the kind of configured view appropriate to its task.

Define a host and port to connect to if you want to do remote viewing.

Sets the source path.

Adds a path to source files.

Create a path to be configured with the locations of the source files.

Adds a path to sourcepath.

Create a path to be configured with the locations of the source files.

Adds a path to source code to analyze.

Adds a path for source compilation.

Create a placeholder indicating where on the command line the name of the source file should be inserted.

create a stream handler that will be used to get the output since metamata tools do not report with convenient files such as XML.

if the report is transform via a temporary txt file we should use a a normal logger here, otherwise we could use the metrics handler directly to capture and transform the output on stdout to XML.

return the default stream handler for this task

Create the input, error and output streams based on the configuration options.

A substitution pattern.

add a sound when the build succeeds

Adds a fileset for support elements.

Creates and adds a -tag argument.

Creates and adds a -tag argument.

Add a new fileset with the option to specify permissions

Create a placeholder indicating where on the command line the name of the target file should be inserted.

Creates a new instance of a task, adding it to a list of created tasks for later invalidation.

Create a new instance of a task, adding it to a list of created tasks for later invalidation.

Create a temporary file in a given directory.

add a declaration of a testlet to run

Add a SQL transaction to execute

Defines events to use for interacting with the collection of data performed during coverage.

Add a project description entry on the project list.

create a new JVM argument

Get the classpath to the websphere classpaths

Create the Watchdog to kill a runaway process.

Create the Watchdog to kill a runaway process.

Adds a deployment tool for Weblogic server.

Adds a deployment tool for Weblogic when using the Toplink Object-Relational mapping.

Adds a deployment tool for Websphere 4.0 server.

Get the classpath to the weblogic classpaths

Get the classpath to the weblogic classpaths

Add text to send to the server A subTask <write> tag was found.

Add text to send to the server A subTask <write> tag was found.

creator - allows use of create/store external to IntrospectionHelper.

Enumerated attribute with the values "asis", "cr", "lf" and "crlf".

Compiles C# source into executables or modules.