By default, the main configuration file is named config, with the exception of Windows, where it is named config.txt. Configuration lines consist of an initial keyword followed by a list of values, all separated by whitespace (any number of spaces or tabs). For example:
confdir /etc/privoxy
Assigns the value /etc/privoxy to the option confdir and thus indicates that the configuration directory is named "/etc/privoxy/".
All options in the config file except for confdir and logdir are optional. Watch out in the below description for what happens if you leave them unset.
The main config file controls all aspects of Privoxy's operation that are not location dependent (i.e. they apply universally, no matter where you may be surfing). Like the filter and action files, the config file is a plain text file and can be modified with a text editor like emacs, vim or notepad.exe.
If you intend to operate Privoxy for more users than just yourself, it might be a good idea to let them know how to reach you, what you block and why you do that, your policies, etc.
Location of the Privoxy User Manual.
A fully qualified URI
Unset
https://www.privoxy.org/version/user-manual/ will be used, where version is the Privoxy version.
The User Manual URI is the single best source of information on Privoxy, and is used for help links from some of the internal CGI pages. The manual itself is normally packaged with the binary distributions, so you probably want to set this to a locally installed copy.
Examples:
The best all purpose solution is simply to put the full local PATH to where the User Manual is located:
user-manual /usr/share/doc/privoxy/user-manual |
The User Manual is then available to anyone with access to Privoxy, by following the built-in URL: http://config.privoxy.org/user-manual/ (or the shortcut: http://p.p/user-manual/).
If the documentation is not on the local system, it can be accessed from a remote server, as:
user-manual http://example.com/privoxy/user-manual/ |
| Warning |
If set, this option should be the first option in the config file, because it is used while the config file is being read on start-up. |
A URL to be displayed in the error page that users will see if access to an untrusted page is denied.
URL
Unset
No links are displayed on the "untrusted" error page.
The value of this option only matters if the experimental trust mechanism has been activated. (See trustfile below.)
If you use the trust mechanism, it is a good idea to write up some on-line documentation about your trust policy and to specify the URL(s) here. Use multiple times for multiple URLs.
The URL(s) should be added to the trustfile as well, so users don't end up locked out from the information on why they were locked out in the first place!
An email address to reach the Privoxy administrator.
Email address
Unset
No email address is displayed on error pages and the CGI user interface.
If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown.
A URL to documentation about the local Privoxy setup, configuration or policies.
URL
Unset
No link to local documentation is displayed on error pages and the CGI user interface.
If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown.
This URL shouldn't be blocked ;-)
Privoxy can (and normally does) use a number of other files for additional configuration, help and logging. This section of the configuration file tells Privoxy where to find those other files.
The user running Privoxy, must have read permission for all configuration files, and write permission to any files that would be modified, such as log files and actions files.
The directory where the other configuration files are located.
Path name
/etc/privoxy (Unix) or Privoxy installation dir (Windows)
Mandatory
No trailing "/", please.
An alternative directory where the templates are loaded from.
Path name
unset
The templates are assumed to be located in confdir/template.
Privoxy's original templates are usually overwritten with each update. Use this option to relocate customized templates that should be kept. As template variables might change between updates, you shouldn't expect templates to work with Privoxy releases other than the one they were part of, though.
A directory where Privoxy can create temporary files.
Path name
unset
No temporary files are created, external filters don't work.
To execute external filters, Privoxy has to create temporary files. This directive specifies the directory the temporary files should be written to.
It should be a directory only Privoxy (and trusted users) can access.
The directory where all logging takes place (i.e. where the logfile is located).
Path name
/var/log/privoxy (Unix) or Privoxy installation dir (Windows)
Mandatory
No trailing "/", please.
The actions file(s) to use
Complete file name, relative to confdir
| match-all.action # Actions that are applied to all sites and maybe overruled later on. |
| default.action # Main actions file |
| user.action # User customizations |
No actions are taken at all. More or less neutral proxying.
Multiple actionsfile lines are permitted, and are in fact recommended!
The default values are default.action, which is the "main" actions file maintained by the developers, and user.action, where you can make your personal additions.
Actions files contain all the per site and per URL configuration for ad blocking, cookie management, privacy considerations, etc.
The filter file(s) to use
File name, relative to confdir
default.filter (Unix) or default.filter.txt (Windows)
No textual content filtering takes place, i.e. all +filter{name} actions in the actions files are turned neutral.
Multiple filterfile lines are permitted.
The filter files contain content modification rules that use regular expressions. These rules permit powerful changes on the content of Web pages, and optionally the headers as well, e.g., you could try to disable your favorite JavaScript annoyances, re-write the actual displayed text, or just have some fun playing buzzword bingo with web pages.
The +filter{name} actions rely on the relevant filter (name) to be defined in a filter file!
A pre-defined filter file called default.filter that contains a number of useful filters for common problems is included in the distribution. See the section on the filter action for a list.
It is recommended to place any locally adapted filters into a separate file, such as user.filter.
The log file to use
File name, relative to logdir
Unset (commented out). When activated: logfile (Unix) or privoxy.log (Windows).
No logfile is written.
The logfile is where all logging and error messages are written. The level of detail and number of messages are set with the debug option (see below). The logfile can be useful for tracking down a problem with Privoxy (e.g., it's not blocking an ad you think it should block) and it can help you to monitor what your browser is doing.
Depending on the debug options below, the logfile may be a privacy risk if third parties can get access to it. As most users will never look at it, Privoxy only logs fatal errors by default.
For most troubleshooting purposes, you will have to change that, please refer to the debugging section for details.
Any log files must be writable by whatever user Privoxy is being run as (on Unix, default user id is "privoxy").
To prevent the logfile from growing indefinitely, it is recommended to periodically rotate or shorten it. Many operating systems support log rotation out of the box, some require additional software to do it. For details, please refer to the documentation for your operating system.
The name of the trust file to use
File name, relative to confdir
Unset (commented out). When activated: trust (Unix) or trust.txt (Windows)
The entire trust mechanism is disabled.
The trust mechanism is an experimental feature for building white-lists and should be used with care. It is NOT recommended for the casual user.
If you specify a trust file, Privoxy will only allow access to sites that are specified in the trustfile. Sites can be listed in one of two ways:
Prepending a ~ character limits access to this site only (and any sub-paths within this site), e.g. ~www.example.com allows access to ~www.example.com/features/news.html, etc.
Or, you can designate sites as trusted referrers, by prepending the name with a + character. The effect is that access to untrusted sites will be granted -- but only if a link from this trusted referrer was used to get there. The link target will then be added to the "trustfile" so that future, direct accesses will be granted. Sites added via this mechanism do not become trusted referrers themselves (i.e. they are added with a ~ designation). There is a limit of 512 such entries, after which new entries will not be made.
If you use the + operator in the trust file, it may grow considerably over time.
It is recommended that Privoxy be compiled with the --disable-force, --disable-toggle and --disable-editor options, if this feature is to be used.
Possible applications include limiting Internet access for children.
These options are mainly useful when tracing a problem. Note that you might also want to invoke Privoxy with the --no-daemon command line option when debugging.
Key values that determine what information gets logged.
Integer values
0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)
Default value is used (see above).
The available debug levels are:
debug 1 # Log the destination for each request |