#
# USB Storage driver configuration
#

comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
comment "may also be needed; see USB_STORAGE Help for more information"
	depends on USB

config USB_STORAGE
	tristate "USB Mass Storage support"
	depends on USB && SCSI
	---help---
	  Say Y here if you want to connect USB mass storage devices to your
	  computer's USB port. This is the driver you need for USB
	  floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
	  USB flash devices, and memory sticks, along with
	  similar devices. This driver may also be used for some cameras
	  and card readers.

	  This option depends on 'SCSI' support being enabled, but you
	  probably also need 'SCSI device support: SCSI disk support'
	  (BLK_DEV_SD) for most USB storage devices.

	  To compile this driver as a module, choose M here: the
	  module will be called usb-storage.

config USB_STORAGE_DEBUG
	bool "USB Mass Storage verbose debug"
	depends on USB_STORAGE
	help
	  Say Y here in order to have the USB Mass Storage code generate
	  verbose debugging messages.

config USB_STORAGE_DATAFAB
	bool "Datafab Compact Flash Reader support"
	depends on USB_STORAGE
	help
	  Support for certain Datafab CompactFlash readers.
	  Datafab has a web page at <http://www.datafabusa.com/>.

config USB_STORAGE_FREECOM
	bool "Freecom USB/ATAPI Bridge support"
	depends on USB_STORAGE
	help
	  Support for the Freecom USB to IDE/ATAPI adaptor.
	  Freecom has a web page at <http://www.freecom.de/>.

config USB_STORAGE_ISD200
	bool "ISD-200 USB/ATA Bridge support"
	depends on USB_STORAGE
	---help---
	  Say Y here if you want to use USB Mass Store devices based
	  on the In-Systems Design ISD-200 USB/ATA bridge.

	  Some of the products that use this chip are:

	  - Archos Jukebox 6000
	  - ISD SmartCable for Storage
	  - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
	  - Sony CRX10U CD-R/RW drive
	  - CyQ've CQ8060A CDRW drive
	  - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)

config USB_STORAGE_DPCM
	bool "Microtech/ZiO! CompactFlash/SmartMedia support"
	depends on USB_STORAGE
	help
	  Say Y here to suAR SLC90E66 support"
	depends on PCI
	help
	  This option enables support for the EFAR SLC90E66
	  IDE controller found on some older machines.

	  If unsure, say N.

config ATA_GENERIC
	tristate "Generic ATA support"
	depends on PCI
	help
	  This option enables support for generic BIOS configured
	  ATA controllers via the new ATA layer

	  If unsure, say N.

config PATA_HPT366
	tristate "HPT 366/368 PATA support"
	depends on PCI
	help
	  This option enables support for the HPT 366 and 368
	  PATA controllers via the new ATA layer.

	  If unsure, say N.

config PATA_HPT37X
	tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
	depends on PCI && EXPERIMENTAL
	help
	  This option enables support for the majority of the later HPT
	  PATA controllers via the new ATA layer.

	  If unsure, say N.

config PATA_HPT3X2N
	tristate "HPT 372N/302N PATA support (Very Experimental)"
	depends on PCI && EXPERIMENTAL
	help
	  This option enables support for the N variant HPT PATA
	  controllers via the new ATA layer

	  If unsure, say N.

config PATA_HPT3X3
	tristate "HPT 343/363 PATA support"
	depends on PCI
	help
	  This option enables support for the HPT 343/363
	  PATA controllers via the new ATA layer

	  If unsure, say N.

config PATA_HPT3X3_DMA
	bool "HPT 343/363 DMA support (Experimental)"
	depends on PATA_HPT3X3
	help
	  This option enables DMA support for the HPT343/363
	  controllers. Enable with care as there are still some
	  problems with DMA on this chipset.

config PATA_ISAPNP
	tristate "ISA Plug and Play PATA support (Experimental)"
	depends on EXPERIMENTAL && ISAPNP
	help
	  This option enables support for ISA plug & play ATA
	  controllers such as those found on old soundcards.

	  If unsure, say N.

config PATA_IT821X
	tristate "IT8211/2 PATA support"
	depends on PCI
	help
	  This option enables support for the ITE 8211 and 8212
	  PATA controllers via the new ATA layer, including RAID
	  mode.

	  If unsure, say N.

config PATA_IT8213
	tristate "IT8213 PATA support (Experimental)"
	depends on PCI && EXPERIMENTAL
	help
	  This option enables support for the ITE 821 PATA
          controllers via the new ATA layer.

	  If unsure, say N.

config PATA_JMICRON
	tristate "JMicron PATA support"
	depends on PCI
	help
	  Enable support for the JMicron IDE controller, via the new
	  ATA layer.

	  If unsure, say N.

config PATA_LEGACY
	tristate "Legacy ISA PATA support (Experimental)"
	depends on ISA && EXPERIMENTAL
	help
	  This option enables support for ISA/VLB bus legacy PATA
	  ports and allows them to be accessed via the new ATA layer.

	  If unsure, say N.

config PATA_TRIFLEX
	tristate "Compaq Triflex PATA support"
	depends on PCI
	help
	  Enable support for the Compaq 'Triflex' IDE controller as found
	  on many Compaq Pentium-Pro systems, via the new ATA layer.

	  If unsure, say N.

config PATA_MARVELL
	tristate "Marvell PATA support via legacy mode"
	depends on PCI
	help
	  This option enables limited support for the Marvell 88SE61xx ATA
	  controllers. If you wish to use only the SATA ports then select
	  the AHCI driver alone. If you wish to the use the PATA port or
	  both SATA and PATA include this driver.

	  If unsure, say N.

config PATA_MPC52xx
	tristate "Freescale MPC52xx SoC internal IDE"
	depends on PPC_MPC52xx
	help
	  This option enables support for integrated IDE controller
	  of the Freescale MPC52xx SoC.

	  If unsure, say N.

config PATA_MPIIX
	tristate "Intel PATA MPIIX support"
	depends on PCI
	help
	  This option enables support for MPIIX 